Created
February 3, 2024 01:25
-
-
Save nepeat/02525f4353066911f3c1fc72271ffbd2 to your computer and use it in GitHub Desktop.
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
APBoot 2.5.3.10 (build 74666) | |
Built: 2020-03-12 at 17:05:54 | |
Model: AP-53x/555 | |
DRAM: 2 GiB | |
Flash: Detected MX25U6435F: total 8 MiB | |
NAND: 256 MiB | |
Power: 802.3af POE, port0 | |
No POE, port1 | |
Net: eth0 | |
Radio: ipq8074#0, ipq8074#1 | |
Reset: warm | |
FIPS: passed | |
Hit <Enter> to stop autoboot: 0 | |
apboot> | |
apboot> factory_reset | |
Clearing state... | |
Checking OS image and flags | |
Image is signed; verifying checksum... passed | |
Preserving image partition 0 | |
Erasing UBIFS ...done | |
Purging environment... | |
preserving os_partition (1) | |
Erasing SPI flash...Writing to SPI flash...done | |
Erasing SPI flash...Writing to SPI flash...done | |
apboot> boot | |
Booting OS partition 1 | |
Checking image @ 0x3000000 | |
Invalid image format version: 0xffffffff | |
Checking image @ 0x0 | |
Copying image from 0x50500000 | |
Image is signed; verifying checksum... passed | |
SHA2 Signature available | |
Signer Cert OK | |
Policy Cert OK | |
RSA signature verified using SHA2. | |
Uncompressing Kernel Image ... OK | |
[ 0.000000] | |
[ 0.000000] Aruba Networks | |
[ 0.000000] ArubaOS Version 8.10.0.9-8.10.0.9 (build 88493 / label #88493) | |
[ 0.000000] Built by jenkins@aadb7391b103 on 2023-11-16 at 05:47:33 UTC (gcc version 5.3.0) | |
[ 0.000000] p:anul_base: 0xb9c00000, v:anul_base: 0xffffffc079c00000, size:0x1800000 | |
[ 6.453491] tpm tpm0: TPM2_RC_INITIALIZE (256) continue selftest | |
[ 6.773801] tpm tpm0: TPM2 self test passed | |
[ 7.090189] cnss[2]: INFO: Platform driver probed successfully. plat ffffffc009cb0018 tgt 0xffff | |
[ 7.090236] Skip QCA8074V2 in V1 platform | |
[ 9.394550] Starting Kernel SHA1 KAT ... | |
[ 9.394568] Completed Kernel SHA1 KAT | |
[ 9.428962] Starting Kernel HMAC-SHA1 KAT ... | |
[ 9.472797] Starting Kernel DES KAT ... | |
[ 9.525865] Completed Kernel DES KAT | |
[ 9.573769] Starting Kernel AES KAT ... | |
[ 9.616499] Completed Kernel AES KAT | |
[ 9.662310] Starting Kernel AESGCM KAT ... | |
[ 9.706044] Completed Kernel AESGCM KAT | |
[ 9.755077] Completed Kernel HMAC-SHA1 KAT | |
Thu Jan 1 00:00:00 PST 1970 | |
Populate AP type info | |
Domain Name: SetMeUp.arubanetworks.com | |
Current OEM Name : Aruba Networks | |
Disabling ipv6 for devices by default | |
AP-type has_ble_support: NORDIC_ONBOARD. | |
IPv6 capability is supported for devices | |
apboot_upgrade[1174]: the running APBoot is up to date | |
No panic info available | |
Enabling ble_daemon and ble_relay via nanny | |
kilchoman: Start hotplug | |
apfcutil: sector CACHE: Cache uninitialized | |
apfcutil: sector RAP: Cache uninitialized | |
apfcutil: sector FAT: Cache uninitialized | |
apfcutil: sector DRT: Cache uninitialized | |
apfcutil: sector SCRATCH: Cache uninitialized | |
Backup ENV. | |
apfcutil: sector MESH Prov: Cache uninitialized | |
[ 17.632762] nss_driver - fw of size 753136 bytes copied to load addr: 40000000, nss_id : 0 | |
[ 17.640119] Supported Frequencies - | |
[ 17.718273] 748.8 MHz 1.4976 GHz | |
[ 17.790077] 1.6896 GHz [ 17.802576] | |
[ 17.829778] ffffff80009d8600: set sdma ffffffc06f4cc200 | |
[ 17.848492] ffffff80009d8600: meminfo init succeed | |
[ 17.924533] nss_driver - fw of size 301780 bytes copied to load addr: 40800000, nss_id : 1 | |
[ 17.935807] node size 2 # items 4 | |
[ 17.935810] memory: 40000000 2147483648 (avl 1904594944) items 4 active_cores 2 | |
[ 17.935815] addr/size storage words 2 2 # words 4 in DTS, ddr size 1000000 | |
[ 17.935819] ffffff80009d8600: nss core 0 booted successfully | |
[ 18.276296] Supported Frequencies - | |
[ 18.345308] 748.8 MHz 1.4976 GHz | |
[ 18.414037] 1.6896 GHz [ 18.426535] | |
[ 18.453736] ffffff80009df700: set sdma ffffffc070804000 | |
[ 18.472431] ffffff80009df700: meminfo init succeed | |
[ 18.539694] node size 2 # items 4 | |
[ 18.590113] memory: 40000000 2147483648 (avl 1906925568) items 4 active_cores 2 | |
[ 18.630724] addr/size storage words 2 2 # words 4 in DTS, ddr size 1000000 | |
[ 18.716151] ffffff80009df700: nss core 1 booted successfully | |
SSDK Init OK! | |
operation done. | |
SSDK Init OK! | |
operation done. | |
SSDK Init OK! | |
operation done. | |
Enter non-FIPS mode | |
Cfg len is 0 | |
Configuration file is empty, turning on default services... | |
extended ssid activate due to no AP config ... | |
The AP is in factory default status | |
Mesh enabled | |
dual uplink platform just by factory default | |
Ethernet port 1 mode: active-standby | |
Eth0 has been enslaved in bond0 | |
Eth1 works as uplink by factory default | |
CMDLINE_WRITE_ENVIRONMENT arg {enet1_mode=uplink} | |
auto-creating enet_mode uplink in ap-env flash | |
Starting watchdog process... | |
Aruba watchdog daemon started [4 thread(s)] | |
touching file /tmp/ip_mode_0 | |
Enable IPv6 for the Conductor v6 discovery | |
Enabling DHCPv6 ... | |
init usb modem ... | |
No USB Plugged in | |
Checking country code. | |
error in reading source file | |
Ethernet uplink active. Becoming Mesh Portal | |
Mesh is DISABLED on this device. | |
extended ssid is activated on the platform ... | |
copying bootuplog ... | |
[ 46.007905] aruba_alloc_contig_range freeing 2478 reserved pages at:0xffffffc07aa52000 | |
allow PAPI | |
set device anul0 mtu to 2000 | |
notify asap_mod 3g no present... | |
Enabling IPv6 for devices... IP mode is v4-only... | |
apdot1x authentication is not enabled | |
Starting DHCP | |
Getting an IP address... | |
Jan 1 00:00:36 udhcpc[4767]: udhcpc (v0.9.9-pre) started | |
Jan 1 00:00:36 udhcpc[4767]: send_discover: pkt num 0, secs 0 | |
Jan 1 00:00:36 udhcpc[4767]: Sending discover... | |
Jan 1 00:00:37 udhcpc[4767]: send_selecting: pkt num 0, secs 256 | |
Jan 1 00:00:37 udhcpc[4767]: Sending select for 10.36.75.213... | |
Jan 1 00:00:37 udhcpc[4767]: Lease of 10.36.75.213 obtained, lease time 86400 | |
[ 50.912700] ip_time_handler: Got ip and packets on bond0 Started conductor election 26-0, rand 31 | |
10.36.75.213 255.255.255.0 10.36.75.1 | |
2601:600:a401:28b5:828d:b7ff:fec0:6d5/64 Scope:Global | |
Compressing all files in the /etc/httpd directory... | |
Done. | |
Starting Webserver | |
bind: Transport endpoint is not connected | |
bind: Transport endpoint is not connected | |
bind: Transport endpoint is not connected | |
Put ntpdate to the nannylist. | |
Preparing hawkeye wlan modules | |
Loading ini config for AP-555 | |
[ 67.657265] diag: IPC Logging disabled | |
[ 67.660089] TRACK: P[0] PMask[4] | |
[ 67.688600] TRACK: P[1] PMask[4] | |
[ 67.729172] TRACK: P[2] PMask[4] | |
[ 67.767882] TRACK: P[3] PMask[4] | |
Starting cnss daemon -i integrated | |
[ 68.828120] cnss[2]: INFO: Setting daemon_support=1 for instance_id 0x2 | |
[ 68.830328] cnss[2]: INFO: Setting cold_boot_support=1 for instance_id 0x2 | |
Initiating cold boot calibration | |
[ 69.274975] cnss[2]: INFO: Waiting for FW ready. Device: 0xffff, FW ready timeout: 15 seconds | |
[ 69.275665] Fatal error received from wcss software!: | |
[ 69.275665] QC Image Version: QC_IMAGE_VERSION_STRING=WLAN.HK.2.4-02142-QCAHKSWPL_SILICONZ-1 | |
[ 69.275665] Image Variant : IMAGE_VARIANT_STRING=8074.wlanfw.eval_v2Q | |
[ 69.275665] | |
[ 69.275665] DalChipInfo.c:289 Chip Major Version mismatch between Hardware:0x1 and Software:0x2 | |
[ 69.275665] param0 :1, param1 :2, param2 :zero. | |
[ 69.275665] Thread ID : 0x00000076 Thread name : sys_m_smsm Process ID : 0 | |
[ 69.275665] Register: | |
[ 69.275665] SP : 0x4b51daa0 | |
[ 69.275665] FP : 0x4b51daa8 | |
[ 69.275665] PC : 0x4b19cc30 | |
[ 69.275665] SSR : 0x00000008 | |
[ 69.275665] BADVA : 0x00020000 | |
[ 69.275665] LR : 0x4b19c3cc | |
[ 69.275665] | |
[ 69.275665] Stack Dump | |
[ 69.275665] from : 0x4b51daa0 | |
[ 69.275665] to : 0x4b51dbe0 | |
[ 69.275665] | |
[ 69.975136] | |
[ 69.975136] FW assert count 1 collected 1 Send PC:0x4b19cc30 to Wlan driver! | |
[ 70.241748] cnss[2]: ERR: XXX TARGET ASSERTED XXX | |
[ 70.344792] cnss[2]: ERR: XXX TARGET QCA8074 instance_id 0x2 plat_env idx 0 XXX | |
[ 70.402101] qmi_history_index [127] | |
[ 70.487507] Call trace: | |
[ 70.529420] Kernel panic - not syncing: Take care of the TARGET ASSERT first | |
[ 70.529420] | |
[ 70.558348] Call trace: | |
[ 70.662775] Couldn't get reading for sensor 4 | |
[ 70.689641] Couldn't get reading for sensor 5 | |
[ 70.743807] Couldn't get reading for sensor 6 | |
[ 70.795836] The reading for sensor 7 is 0x00207107 | |
[ 70.847975] Couldn't get reading for sensor 8 | |
[ 70.904223] Couldn't get reading for sensor 9 | |
[ 70.957295] The reading for sensor 10 is 0x0020a10d | |
[ 71.009432] Couldn't get reading for sensor 11 | |
[ 71.065682] Couldn't get reading for sensor 12 | |
[ 71.119849] Couldn't get reading for sensor 13 | |
[ 71.172973] Couldn't get reading for sensor 14 | |
[ 71.226043] The reading for sensor 15 is 0x0020f111 | |
[ 71.282319] NSS core 1 signal COREDUMP COMPLETE 4000 | |
[ 71.336469] ffffff80009df700: Starting NSS-FW logbuffer dump for core 1 | |
[ 71.398972] NSS core 0 signal COREDUMP COMPLETE 4000 | |
[ 71.475012] ffffff80009d8600: Starting NSS-FW logbuffer dump for core 0 | |
[ 74.769905] kexec_core: Crash kernel is loaded | |
[ 74.769927] kexec_core: Booting to Aruba dump capture kernel to capture "Full System Dump" "WLAN FW DUMP" "NSS FW DUMP" | |
[ 74.809523] aruba_watchdog: Disabling watchdog on CPU 3 | |
[ 74.937639] SMP: CPU3 stopping secondary CPUs mask=0x7 | |
[ 75.000139] ipi_cpu_crash_stop[804]: CPU2 | |
[ 75.000141] ipi_cpu_crash_stop[804]: CPU1 | |
[ 75.000142] ipi_cpu_crash_stop[804]: CPU0 | |
[ 75.000145] aruba_watchdog: Disabling watchdog on CPU 1 | |
[ 75.000146] aruba_watchdog: Disabling watchdog on CPU 0 | |
[ 75.267845] aruba_watchdog: Disabling watchdog on CPU 2 | |
[ 77.968898] SMP: DONE stopping secondary CPUs | |
[ 0.000000] | |
[ 0.000000] Aruba Networks | |
[ 0.000000] ArubaOS Version 8.10.0.9-8.10.0.9 (build 88493 / label #88493) | |
[ 0.000000] Built by jenkins@aadb7391b103 on 2023-11-16 at 05:47:33 UTC (gcc version 5.3.0) | |
[ 0.000000] ---------------------------------------------------------------------- | |
[ 0.000000] | This is AOS Dump Capture Kernel | | |
[ 0.000000] ---------------------------------------------------------------------- | |
[ 0.002181] psci: failed to boot CPU1 (-22) | |
[ 0.002184] CPU1: failed to boot: -22 | |
[ 0.002187] CPU1: failed in unknown state : 0x0 | |
[ 0.002299] psci: failed to boot CPU2 (-22) | |
[ 0.002302] CPU2: failed to boot: -22 | |
[ 0.002304] CPU2: failed in unknown state : 0x0 | |
[ 0.002400] psci: failed to boot CPU3 (-22) | |
[ 0.002403] CPU3: failed to boot: -22 | |
[ 0.002405] CPU3: failed in unknown state : 0x0 | |
[ 9.820361] cnss[2]: INFO: Platform driver probed successfully. plat ffffffc03e550018 tgt 0xffff | |
[ 9.820403] Skip QCA8074V2 in V1 platform | |
[ 10.134169] CPUidle arm: CPU 1 failed to init idle CPU ops | |
[ 10.157411] aruba_vmcore_skip_user_cache[192]: primary_phys_offset=40000000 pg_data_phy=0x0000000041a06200 node_start_pfn=41000 end_pfn=bfe00 node_present_pages=72a00 node_spanned_pages=7ee00 | |
[ 10.765744] Error: aruba_primary_va_to_pa_arm64[94]: pmd_phy=0x00000000bfda1010 seg=8182 page_bit=ffffffffffffffff | |
[ 10.765776] aruba_vmcore_skip_user_cache[203]: Error=-5 pfn=50000 | |
[ 10.876234] aruba_vmcore_optimized_page_stats[165]: user_cache=1215 free pages=0 error=1 total=0 | |
[ 13.373945] Starting Kernel SHA1 KAT ... | |
[ 13.373963] Completed Kernel SHA1 KAT | |
[ 13.409692] Starting Kernel HMAC-SHA1 KAT ... | |
[ 13.452216] Starting Kernel DES KAT ... | |
[ 13.505243] Completed Kernel DES KAT | |
[ 13.556120] Completed Kernel HMAC-SHA1 KAT | |
[ 13.595909] Starting Kernel AES KAT ... | |
[ 13.643801] Completed Kernel AES KAT | |
[ 13.691852] Starting Kernel AESGCM KAT ... | |
[ 13.735435] Completed Kernel AESGCM KAT | |
Thu Jan 1 00:00:00 PST 1970 | |
/aruba/bin/apfcutil: can't load library 'libdevCert.so' | |
/aruba/bin/apfcutil: can't load library 'libdevCert.so' | |
Loading Ethernet driver and setting up network ... | |
[ 18.059438] netif_napi_add() called with weight 100 on device eth0 | |
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 | |
Getting an IP address...Jan 1 00:00:05 udhcpc[1059]: udhcpc (v0.9.9-pre) started | |
Jan 1 00:00:05 udhcpc[1059]: send_discover: pkt num 0, secs 0 | |
Jan 1 00:00:05 udhcpc[1059]: Sending discover... | |
Jan 1 00:00:07 udhcpc[1059]: send_discover: pkt num 1, secs 512 | |
Jan 1 00:00:07 udhcpc[1059]: Sending discover... | |
Jan 1 00:00:08 udhcpc[1059]: send_selecting: pkt num 0, secs 768 | |
Jan 1 00:00:08 udhcpc[1059]: Sending select for 10.36.75.213... | |
Jan 1 00:00:08 udhcpc[1059]: Lease of 10.36.75.213 obtained, lease time 86400 | |
Successfully got an IP address10.36.75.213 | |
Misc setup ... | |
vm.vfs_cache_pressure = 500 | |
vm.dirty_background_ratio = 1 | |
vm.dirty_ratio = 5 | |
Saving NSS FW to flash ... | |
page size 4096 | |
page size 4096 | |
page size 4096 | |
<<<<< Welcome to the Aruba Access Point Dump Capture Kernel >>>>> | |
<<<<< Dump TZ log >>>>> | |
(4000026) | |
SMMUAC Bypass | |
xPUAC Enabled | |
(3000012) | |
(4acc9804 0) | |
(4acc9816) | |
SNOC ERROR: ERRLOG0 = 0x80030008 | |
SNOC ERROR: ERRLOG1 = 0x4d008301 | |
SNOC ERROR: ERRLOG2 = 0x00000000 | |
SNOC ERROR: ERRLOG3 = 0x004a1000 | |
SNOC ERROR: ERRLOG4 = 0x00000000 | |
SNOC ERROR: ERRLOG5 = 0x00003f01 | |
PCNOC ERROR: ERRLOG0 = 0x80030008 | |
PCNOC ERROR: ERRLOG1 = 0x4a4020c1 | |
PCNOC ERROR: ERRLOG2 = 0x00000001 | |
PCNOC ERROR: ERRLOG3 = 0x00001000 | |
PCNOC ERROR: ERRLOG4 = 0x00000000 | |
PCNOC ERROR: ERRLOG5 = 0x00003f02 | |
xpu: ISR begin | |
XPU ERROR: Non Sec!! | |
XPU INTR 0:1 >> 00080000:00000000 | |
xpu:>>> [1] XPU error dump, XPU id 39 (MPM2)<<< | |
xpu: uErrorFlags: 00000002 | |
xpu: HAL_XPU2_ERROR_F_CLIENT_PORT | |
uBusFlags: 000810b5 | |
xpu: HAL_XPU2_BUS_F_ERROR_AC | |
xpu: HAL_XPU2_BUS_F_ASHARED | |
xpu: HAL_XPU2_BUS_F_APRIV | |
xpu: HAL_XPU2_BUS_F_APROTNS | |
xpu: HAL_XPU2_BUS_F_AWRITE | |
xpu: HAL_XPU2_BUS_F_ARDALLOCATE | |
xpu: HAL_XPU2_BUS_F_NONSECURE_RG_MATCH | |
xpu: uPhysicalAddress: 00001000 | |
xpu: uMasterId: 0000000c, uAVMID : 00000003 | |
xpu: uATID : 00000000, uABID : 00000002 | |
xpu: uAPID : 00000000, uALen : 00000000 | |
xpu: uASize : 00000002, uAPReqPriority : 00000000 | |
xpu: uAMemType: 00000000 | |
(700020e 42000119) | |
(700020f ffffffff) | |
(3000065 6) | |
(300006a) | |
(3000071 6) | |
(300006c) | |
(7000008) | |
(7000008) | |
(7000008) | |
(7000008) | |
(7000008) | |
(7000008) | |
(7000008) | |
(7000008) | |
(7000008) | |
(7000008) | |
(7000008) | |
(300006d 6) | |
(300006d 6) | |
(300006d 6) | |
(700020e 42000119) | |
(700020f ffffffff) | |
<<<<< Done >>>>> | |
Switching to Full Access | |
~ # Transfering NSS FW Dump ... | |
get_dump_cfg: dump profile config info is empty | |
zipping /aruba/kdump/nssddr... |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment