gistfile1.txt

Filename 'ArubaOS_Scorpio_10.5.0.0_87691'.
Load address: 0x50500000
Loading: #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #######################################
         6.4 MiB/s
done
Bytes transferred = 31552060 (1e1723c hex)

Image is signed; verifying checksum... passed
SHA2 Signature available
Signer Cert OK
Policy Cert OK
RSA signature verified using SHA2.
31552060 bytes written to volume aos0
Verifying flash... 
Upgrade successful.
apboot> boot
Booting OS partition 1
Checking image @ 0x3000000
Invalid image format version: 0xffffffff
Checking image @ 0x0
Copying image from 0x50500000

Image is signed; verifying checksum... passed
SHA2 Signature available
Signer Cert OK
Policy Cert OK
RSA signature verified using SHA2.
Uncompressing Kernel Image ... OK
[    0.000000] 
[    0.000000] Aruba Networks
[    0.000000] ArubaOS Version 10.5.0.0-10.5.0.0 (build 87691 / label #87691) 
[    0.000000] Built by jenkins@1e9c8b814721 on 2023-08-11 at 04:55:26 UTC (gcc version 5.3.0)
[    0.000000] p:anul_base: 0xb9c00000, v:anul_base: 0xffffffc079c00000, size:0x1800000 
[    6.777019] tpm tpm0: TPM2_RC_INITIALIZE (256) continue selftest
[    7.097332] tpm tpm0: TPM2 self test passed
[    7.413648] cnss: INFO: IPC Logging is disabled!
[    7.413874] cnss[2]: INFO: Disabling regdb support for QCA8074
[    7.457585] cnss[2]: INFO: Platform driver probed successfully. plat ffffffc070760018 tgt 0xffff
[    7.526210] Skip QCA8074V2 in V1 platform
[    9.757232] Starting Kernel SHA1 KAT ...
[    9.757251] Completed Kernel SHA1 KAT 
[    9.791644] Starting Kernel HMAC-SHA1 KAT ...
[    9.835454] Starting Kernel DES KAT ... 
[    9.888544] Completed Kernel DES KAT 
[    9.936453] Starting Kernel AES KAT ...
[    9.979182] Completed Kernel AES KAT 
[   10.024989] Starting Kernel AESGCM KAT ...
[   10.068730] Completed Kernel AESGCM KAT 
[   10.117770] Completed Kernel HMAC-SHA1 KAT 
Thu Jan  1 00:00:00 PST 1970
Populate AP type info
Domain Name: SetMeUp.arubanetworks.com
Current OEM Name : Aruba Networks
Disabling ipv6 for devices by default
convert_from_lms is 
AP-type has_ble_support: NORDIC_ONBOARD.
IPv6 capability is supported for devices
apboot_upgrade[1209]: the running APBoot is up to date

No panic info available
No panic info available
Enabling ble_daemon and ble_relay via nanny
kilchoman: Start hotplug
apfcutil: sector CACHE: Cache uninitialized
apfcutil: sector RAP: Cache uninitialized
apfcutil: sector FAT: Cache uninitialized
apfcutil: sector DRT: Cache uninitialized
apfcutil: sector SCRATCH: Cache uninitialized
apfcutil: sector MESH Prov: Cache uninitialized
per-ap-setting not in backup and restore mode, Backup ENV.
[   16.072352] nss_driver - fw of size 772400  bytes copied to load addr: 40000000, nss_id : 0
[   16.074368] Supported Frequencies - 
[   16.157821] 748.8 MHz 1.4976 GHz 
[   16.229673] 1.6896 GHz [   16.242175] 
[   16.269333] ffffff8000a08d00: set sdma ffffffc0769aa900
[   16.288079] ffffff8000a08d00: meminfo init succeed
[   16.364563] nss_driver - fw of size 303892  bytes copied to load addr: 40800000, nss_id : 1
[   16.373446] node size 2 # items 4
[   16.373449] memory: 40000000 2147483648 (avl 1900138496) items 4 active_cores 2
[   16.373455] addr/size storage words 2 2 # words 4 in DTS, ddr size 1000000
[   16.373458] ffffff8000a08d00: nss core 0 booted successfully
[   16.715900] Supported Frequencies - 
[   16.784891] 748.8 MHz 1.4976 GHz 
[   16.853623] 1.6896 GHz [   16.866123] 
[   16.893316] ffffff8000a0fe00: set sdma ffffffc06f5cad00
[   16.912011] ffffff8000a0fe00: meminfo init succeed
[   16.979275] node size 2 # items 4
[   17.029705] memory: 40000000 2147483648 (avl 1902649344) items 4 active_cores 2
[   17.070317] addr/size storage words 2 2 # words 4 in DTS, ddr size 1000000
[   17.155738] ffffff8000a0fe00: nss core 1 booted successfully

 SSDK Init OK!
operation done.


 SSDK Init OK!
operation done.


 SSDK Init OK!
operation done.

Enter non-FIPS mode
Cfg len is 0
Configuration file is empty, turning on default services... 
extended ssid activate due to no AP config ...
The AP is in factory default status
dual uplink platform just by factory default
Ethernet port 1 mode: active-standby
Eth0 has been enslaved in bond0
Info: use bonding and enslave eth1
Starting watchdog process...
Aruba watchdog daemon started [4 thread(s)]
touching file /tmp/ip_mode_0
Enable IPv6 for the Conductor v6 discovery
init usb modem ... 
No USB Plugged in
Checking country code.
error in reading source file
extended ssid is activated on the platform ...
Mesh disabled
copying bootuplog ... 
[   42.282847] aruba_alloc_contig_range freeing 2478 reserved pages at:0xffffffc07aa52000 
allow PAPI
set device anul0 mtu to 2000
notify asap_mod 3g no present...
notify asap standalone ap...
apdot1x authentication is not enabled
Compressing all files in the /etc/httpd directory...
Done.
Starting Webserver
bind: Transport endpoint is not connected
bind: Transport endpoint is not connected
bind: Transport endpoint is not connected
Put ntpdate to the nannylist.
Preparing hawkeye wlan modules
[   42.764116] diag: IPC Logging disabled
[   42.831196] TRACK: P[0]      PMask[4]
[   42.876665] TRACK: P[1]      PMask[4]
[   42.917262] TRACK: P[2]      PMask[4]
[   42.955959] TRACK: P[3]      PMask[4]

Starting cnss daemon -i integrated
[   44.014316] cnss[2]: INFO: Setting daemon_support=1 for instance_id 0x2
[   44.016651] cnss[2]: INFO: Setting cold_boot_support=1 for instance_id 0x2
Initiating cold boot calibration
[   44.463146] cnss[2]: INFO: Waiting for FW ready. Device: 0xffff, FW ready timeout: 15 seconds
[   44.463833] Fatal error received from wcss software!: 
[   44.463833] QC Image Version: QC_IMAGE_VERSION_STRING=WLAN.HK.2.6-02451-QCAHKSWPL_SILICONZ-1
[   44.463833] Image Variant : IMAGE_VARIANT_STRING=8074.wlanfw.eval_v2Q
[   44.463833] 
[   44.463833] DalChipInfo.c:289 Chip Major Version mismatch between Hardware:0x1 and Software:0x2
[   44.463833] param0 :1, param1 :2, param2 :zero.
[   44.463833] Thread ID      : 0x00000076  Thread name    : sys_m_smsm  Process ID     : 0
[   44.463833] Register:
[   44.463833] SP : 0x4b53a4e0
[   44.463833] FP : 0x4b53a4e8
[   44.463833] PC : 0x4b108138
[   44.463833] SSR : 0x00000008
[   44.463833] BADVA : 0x00020000
[   44.463833] LR : 0x4b1078d4
[   44.463833] 
[   44.463833] Stack Dump
[   44.463833] from : 0x4b53a4e0
[   44.463833] to   : 0x4b53a620
[   44.463833] 
[   45.163325] 
[   45.163325]  FW assert count 1 collected 1 Send PC:0x4b108138 to Wlan driver!
[   45.429883] cnss[2]: ERR: XXX TARGET ASSERTED XXX
[   45.532960] cnss[2]: ERR: XXX TARGET QCA8074 instance_id 0x2 plat_env idx 0 XXX
[   45.590267] qmi_history_index [127]
[   45.675676] Call trace:
[   45.717337] [<ffffff8008096d50>] dump_backtrace+0x0/0x178
[   45.746503] [<ffffff8008096edc>] show_stack+0x14/0x1c
[   45.813170] [<ffffff800829e454>] dump_stack+0x94/0xb4
[   45.873670] [<ffffff8001c0a6c8>] ol_ath_wifi_ssr+0x158/0xbd8 [qca_ol]
[   45.934073] [<ffffff8001c0b7c8>] ol_ath_pld_remove+0xa8/0x148 [qca_ol]
[   46.011149] [<ffffff8001baa478>] pld_pcie_device_self_recovery+0x70/0x268 [qca_ol]
[   46.088178] [<ffffff80083dbe10>] cnss_qca8074_notifier_atomic_nb+0xd0/0xe4
[   46.178800] [<ffffff80080c12e0>] notifier_call_chain+0x50/0x84
[   46.261086] [<ffffff80080c138c>] atomic_notifier_call_chain+0x18/0x20
[   46.330882] [<ffffff800831c664>] subsys_notif_queue_notification+0x28/0x4c
[   46.409007] [<ffffff800831dec0>] notify_each_subsys_device.isra.5+0xbc/0xf0
[   46.490255] [<ffffff800831e364>] subsystem_restart_dev+0x1d8/0x2b8
[   46.572549] [<ffffff80084bd960>] q6v5_fatal_interrupt+0x14c/0x184
[   46.647547] [<ffffff80080e1b60>] handle_nested_irq+0xb0/0x104
[   46.721506] [<ffffff8008316d98>] qcom_smp2p_intr+0x268/0x2e0
[   46.790255] [<ffffff80080df8ac>] irq_thread_fn+0x28/0x4c
[   46.859003] [<ffffff80080dfbb4>] irq_thread+0x10c/0x1e8
[   46.922546] [<ffffff80080c0640>] kthread+0xe0/0xe8
[   46.981920] [<ffffff8008093510>] ret_from_fork+0x10/0x40
[   47.040254] Kernel panic - not syncing: Take care of the TARGET ASSERT first
[   47.040254] 
[   47.105890] Call trace:
[   47.206916] [<ffffff8008096d50>] dump_backtrace+0x0/0x178
[   47.234003] [<ffffff8008096edc>] show_stack+0x14/0x1c
[   47.300670] [<ffffff800829e454>] dump_stack+0x94/0xb4
[   47.361088] [<ffffff800811b5cc>] panic+0xe8/0x26c
[   47.421581] [<ffffff8001c0a6d0>] ol_ath_wifi_ssr+0x160/0xbd8 [qca_ol]
[   47.477823] [<ffffff8001c0b7c8>] ol_ath_pld_remove+0xa8/0x148 [qca_ol]
[   47.554899] [<ffffff8001baa478>] pld_pcie_device_self_recovery+0x70/0x268 [qca_ol]
[   47.631928] [<ffffff80083dbe10>] cnss_qca8074_notifier_atomic_nb+0xd0/0xe4
[   47.722550] [<ffffff80080c12e0>] notifier_call_chain+0x50/0x84
[   47.804836] [<ffffff80080c138c>] atomic_notifier_call_chain+0x18/0x20
[   47.874632] [<ffffff800831c664>] subsys_notif_queue_notification+0x28/0x4c
[   47.952756] [<ffffff800831dec0>] notify_each_subsys_device.isra.5+0xbc/0xf0
[   48.034006] [<ffffff800831e364>] subsystem_restart_dev+0x1d8/0x2b8
[   48.116298] [<ffffff80084bd960>] q6v5_fatal_interrupt+0x14c/0x184
[   48.191296] [<ffffff80080e1b60>] handle_nested_irq+0xb0/0x104
[   48.265255] [<ffffff8008316d98>] qcom_smp2p_intr+0x268/0x2e0
[   48.334005] [<ffffff80080df8ac>] irq_thread_fn+0x28/0x4c
[   48.402753] [<ffffff80080dfbb4>] irq_thread+0x10c/0x1e8
[   48.466294] [<ffffff80080c0640>] kthread+0xe0/0xe8
[   48.525670] [<ffffff8008093510>] ret_from_fork+0x10/0x40
[   48.584008] CPU0: stopping
[   48.649621] CPU2: stopping
[   48.679829] CPU1: stopping
[   48.712186] Couldn't get reading for sensor 4
[   48.744419] The reading for sensor 5 is 0x0020511a
[   48.797545] The reading for sensor 6 is 0x00206117
[   48.853850] Couldn't get reading for sensor 7
[   48.911086] The reading for sensor 8 is 0x002080f1
[   48.964211] The reading for sensor 9 is 0x0020910a
[   49.020516] Couldn't get reading for sensor 10
[   49.077807] Couldn't get reading for sensor 11
[   49.130877] The reading for sensor 12 is 0x0020c111
[   49.184002] The reading for sensor 13 is 0x0020d11a
[   49.241294] The reading for sensor 14 is 0x0020e0fd
[   49.299628] The reading for sensor 15 is 0x0020f0fd
[   53.668018] kexec_core: Crash kernel is NOT loaded
[   53.668033] Rebooting in 5 seconds..

APBoot 2.5.3.10 (build 74666)
Built: 2020-03-12 at 17:05:54

Model: AP-53x/555
DRAM:  2 GiB
Flash: Detected MX25U6435F: total 8 MiB
NAND:  256 MiB
Power: 802.3af POE, port0
       No POE, port1
Net:   eth0
Radio: ipq8074#0, ipq8074#1
Reset: warm
FIPS:  passed 

Hit <Enter> to stop autoboot:  0 
Booting OS partition 1
Checking image @ 0x3000000
Invalid image format version: 0xffffffff
Checking image @ 0x0
Copying image from 0x50500000

Image is signed; verifying checksum... passed
SHA2 Signature available
Signer Cert OK
Policy Cert OK
RSA signature verified using SHA2.
Uncompressing Kernel Image ... OK
[    0.000000] 
[    0.000000] Aruba Networks
[    0.000000] ArubaOS Version 10.5.0.0-10.5.0.0 (build 87691 / label #87691) 
[    0.000000] Built by jenkins@1e9c8b814721 on 2023-08-11 at 04:55:26 UTC (gcc version 5.3.0)
[    0.000000] p:anul_base: 0xb9c00000, v:anul_base: 0xffffffc079c00000, size:0x1800000 
[    6.757192] tpm tpm0: TPM2_RC_INITIALIZE (256) continue selftest
[    7.107533] tpm tpm0: TPM2 self test passed
[    7.423722] cnss: INFO: IPC Logging is disabled!
[    7.423943] cnss[2]: INFO: Disabling regdb support for QCA8074
[    7.467669] cnss[2]: INFO: Platform driver probed successfully. plat ffffffc009e70018 tgt 0xffff
[    7.536281] Skip QCA8074V2 in V1 platform
[   10.334003] Starting Kernel SHA1 KAT ...
[   10.334022] Completed Kernel SHA1 KAT 
[   10.368408] Starting Kernel HMAC-SHA1 KAT ...
[   10.412212] Starting Kernel DES KAT ... 
[   10.465301] Completed Kernel DES KAT 
[   10.513210] Starting Kernel AES KAT ...
[   10.555933] Completed Kernel AES KAT 
[   10.601748] Starting Kernel AESGCM KAT ...
[   10.645488] Completed Kernel AESGCM KAT 
[   10.694515] Completed Kernel HMAC-SHA1 KAT 
Thu Jan  1 00:00:00 PST 1970
Populate AP type info
Domain Name: SetMeUp.arubanetworks.com
Current OEM Name : Aruba Networks
Disabling ipv6 for devices by default
convert_from_lms is 
AP-type has_ble_support: NORDIC_ONBOARD.
IPv6 capability is supported for devices
apboot_upgrade[1204]: the running APBoot is up to date

No panic info available
Enabling ble_daemon and ble_relay via nanny
kilchoman: Start hotplug
per-ap-setting not in backup and restore mode, Backup ENV.
[   17.122886] nss_driver - fw of size 772400  bytes copied to load addr: 40000000, nss_id : 0
[   17.125043] Supported Frequencies - 
[   17.208363] 748.8 MHz 1.4976 GHz 
[   17.280211] 1.6896 GHz [   17.292705] 
[   17.319896] ffffff8000a08d00: set sdma ffffffc06f1bca00
[   17.338618] ffffff8000a08d00: meminfo init succeed
[   17.414770] nss_driver - fw of size 303892  bytes copied to load addr: 40800000, nss_id : 1
[   17.423879] node size 2 # items 4
[   17.423882] memory: 40000000 2147483648 (avl 1906642944) items 4 active_cores 2
[   17.423887] addr/size storage words 2 2 # words 4 in DTS, ddr size 1000000
[   17.423891] ffffff8000a08d00: nss core 0 booted successfully
[   17.766405] Supported Frequencies - 
[   17.835425] 748.8 MHz 1.4976 GHz 
[   17.904162] 1.6896 GHz [   17.916666] 
[   17.943858] ffffff8000a0fe00: set sdma ffffffc07006bc00
[   17.962544] ffffff8000a0fe00: meminfo init succeed
[   18.029919] node size 2 # items 4
[   18.080231] memory: 40000000 2147483648 (avl 1909006336) items 4 active_cores 2
[   18.120847] addr/size storage words 2 2 # words 4 in DTS, ddr size 1000000
[   18.206274] ffffff8000a0fe00: nss core 1 booted successfully

 SSDK Init OK!
operation done.


 SSDK Init OK!
operation done.


 SSDK Init OK!
operation done.

Enter non-FIPS mode
Cfg len is 0
Configuration file is empty, turning on default services... 
extended ssid activate due to no AP config ...
The AP is in factory default status
dual uplink platform just by factory default
Ethernet port 1 mode: active-standby
Eth0 has been enslaved in bond0
Info: use bonding and enslave eth1
Starting watchdog process...
Aruba watchdog daemon started [4 thread(s)]
touching file /tmp/ip_mode_0
Enable IPv6 for the Conductor v6 discovery
init usb modem ...