Skip to content

Instantly share code, notes, and snippets.

Avatar

Neuber Sousa neuberfran

View GitHub Profile
View history do 20.04 ubuntu onde funcionou o RPMsg da imx7d pico
history
1036 cd fs/
1037 code fs.c
1038 cd ..
1039 cd lib/
1040 code lmb.c
1041 cd ..
1042 code .
1043 cd lib/
1044 sudo cp lmb.c ~/backup2
View na hora de grava o seadog no sdcard
COMPILE dtb 🔥🔥🔥🔥
make[1]: Entering directory '/home/neuuberfran/seadog-gaia/kernel/rpi/artifacts/bcm2711-rpi-4b'
make[1]: Leaving directory '/home/neuuberfran/seadog-gaia/kernel/rpi/artifacts/bcm2711-rpi-4b'
Recording analytics 💾
/home/neuuberfran/seadog-gaia
COMPILED KERNEL :: 90 📑
COPY TO SDCARD 💾
/home/neuuberfran/linux
KERNEL BUILD DONE 👌😎
🔥🔥 CREATE initramfs
View issue Arduino ide wio terminal LVGL tests example in windows 11
Arduino: 1.8.19 (Windows 10), Placa:"Seeeduino Wio Terminal, Master, Enabled, 120 MHz (standard), Small (-Os) (standard), 50 MHz (standard), Arduino, Off, On"
In file included from c:\users\neuberfran\onedrive\documentos\arduino\libraries\lvgl-8.3.1\src/misc/lv_log.h:16:0,
from c:\users\neuberfran\onedrive\documentos\arduino\libraries\lvgl-8.3.1\lvgl.h:25,
from C:\Users\neuberfran\OneDrive\Documentos\Arduino\libraries\lvgl-8.3.1\src/lvgl.h:17,
from C:\Users\neuberfran\OneDrive\Documentos\Arduino\libraries\Seeed_Arduino_LvGL-master\examples\lv_tests\lv_test_stress\lv_demo_stress.h:16,
from C:\Users\neuberfran\OneDrive\Documentos\Arduino\libraries\Seeed_Arduino_LvGL-master\examples\lv_tests\lv_test_stress\lv_demo_stress.c:9:
c:\users\neuberfran\onedrive\documentos\arduino\libraries\lvgl-8.3.1\src\lv_conf_internal.h:46:17: note: #pragma message: Possible failure to include lv_conf.h, please read the comment in this file if you get errors
View Codigo dos codigo Neuber Rodando no RTduino
#include <Arduino.h>
#include "ui.h"
#include "vGlobal.h"
#include <SmartDrive.h>
SmartDrive smd = SmartDrive(SmartDrive_DefaultAddress);
int led_state = LOW; // the current state of LED
int button_state; // the current state of button
View issue wio terminal in arduino with lvgl
Arduino: 1.8.19 (Windows 10), Placa:"Seeeduino Wio Terminal, Master, Enabled, 120 MHz (standard), Small (-Os) (standard), 50 MHz (standard), Arduino, Off, On"
View Sipeed FPGA Tang Nano1k - FT2232C
Bus 001 Device 004: ID 0403:6010 Future Technology Devices International, Ltd FT2232C/D/H Dual UART/FIFO IC
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x0403 Future Technology Devices International, Ltd
View nunca para o motor 01 Versão 2
// SquareLine LVGL GENERATED FILE
// EDITOR VERSION: SquareLine Studio 1.0.5
// LVGL VERSION: 8.2
// PROJECT: discovery6
#include <Arduino.h>
#include "ui.h"
#include <SmartDrive.h>
SmartDrive smd = SmartDrive(SmartDrive_DefaultAddress);
View nunca para o motor 01
// SquareLine LVGL GENERATED FILE
// EDITOR VERSION: SquareLine Studio 1.0.5
// LVGL VERSION: 8.2
// PROJECT: discovery6
#include <Arduino.h>
#include "ui.h"
#include <SmartDrive.h>
SmartDrive smd = SmartDrive(SmartDrive_DefaultAddress);
View aduino_main.cpp & main.c from RT-Thread ide project
ARDUINO_MAIN.CPP
============================
#include <Arduino.h>
#include <SmartDrive.h>
SmartDrive smd = SmartDrive(SmartDrive_DefaultAddress);
void setup(void)
{
View ui.c
// SquareLine LVGL GENERATED FILE
// EDITOR VERSION: SquareLine Studio 1.0.5
// LVGL VERSION: 8.2
// PROJECT: discovery6
#include "ui.h"
#include "ui_helpers.h"
#if LV_USE_BTN && LV_BUILD_EXAMPLES
///////////////////// VARIABLES ////////////////////