Go to OpenWRT release page, select the latest release stable release, then targets -> x86 -> 64. Right-click generic-ext4-combined.img.gz (not the "efi"!) and copy the link.
On the Proxmox host, download the archive and unpack it:
wget *paste link here*
gunzip openwrt-*.img.gz
| Install WireGuard via whatever package manager you use. For me, I use apt. | |
| $ sudo add-apt-repository ppa:wireguard/wireguard | |
| $ sudo apt-get update | |
| $ sudo apt-get install wireguard | |
| MacOS | |
| $ brew install wireguard-tools | |
| Generate key your key pairs. The key pairs are just that, key pairs. They can be |
| # Scanner i2c en MicroPython | MicroPython i2c scanner | |
| # Renvoi l'adresse en decimal et hexa de chaque device connecte sur le bus i2c | |
| # Return decimal and hexa adress of each i2c device | |
| # https://projetsdiy.fr - https://diyprojects.io (dec. 2017) | |
| import machine | |
| i2c = machine.I2C(scl=machine.Pin(5), sda=machine.Pin(4)) | |
| print('Scan i2c bus...') | |
| devices = i2c.scan() |
| listen l1 | |
| bind 0.0.0.0:443 | |
| mode tcp | |
| timeout connect 4000 | |
| timeout client 180000 | |
| timeout server 180000 | |
| server srv1 host.example.com:9443 |
| # This example assumes the NGINX proxy is on the same host as the Plex Media Server. | |
| # To configure Plex Media Server to serve requests without requiring authentication, | |
| # ensure that your LAN subnet is correctly added to the advanced server setting called | |
| # "List of IP addresses and networks that are allowed without auth". Example: | |
| # 192.168.0.1/24 | |
| upstream plex-upstream { | |
| server 127.0.0.1:32400; | |
| } |
This is a list of the most helpful keyboard commands I use within top.
h shows help on interactive commands. Also see the top manual page
q to quit the program.
Make sure the if value is correct! If doing this over SSH then open a TMUX session first... or else...
dd if=/dev/YOUR-DEVICE conv=sync,noerror bs=64K | gzip -c > /home/portaj/macbook.img.gz
NOTE: You might not want to compress the image. It just means you have to uncompress it later to mount it. If you're planning to access the data soon, or frequently, don't compress it.
Save it in the same directory as the compressed image so later on if you decide you want to mount or extract data from the image you can see the partition structure without having to decompress the whole image. There might be some other ways to mount a compressed image.
| ''' | |
| Bluetooth/Pyjnius example | |
| ========================= | |
| This was used to send some bytes to an arduino via bluetooth. | |
| The app must have BLUETOOTH and BLUETOOTH_ADMIN permissions (well, i didn't | |
| tested without BLUETOOTH_ADMIN, maybe it works.) | |
| Connect your device to your phone, via the bluetooth menu. After the | |
| pairing is done, you'll be able to use it in the app. |
Add the following chunk to your existing ISC dhcpd.conf file.
if exists user-class and ( option user-class = "iPXE" ) {
filename "http://boot.smidsrod.lan/boot.ipxe";
}
else {
filename "undionly.kpxe";
}
(or see https://gist.github.com/4008017 for a more elaborate setup