Build php-7.0.0 on Debian jessie

configure.sh

./configure \
--prefix=/usr/local/php-7.0.0 \
--build=x86_64-linux-gnu \
--host=x86_64-linux-gnu \
--enable-bcmath \
--enable-calendar \
--enable-ctype \
--enable-dba \
--enable-exif \
--enable-fpm \
--enable-ftp \
--enable-gd-native-ttf \
--enable-intl \
--enable-mbstring \
--enable-shmop \
--enable-soap \
--enable-sockets \
--enable-sysvmsg \
--enable-sysvsem \
--enable-sysvshm \
--enable-zend-signals \
--enable-zip \
--with-bz2 \
--with-config-file-path=/etc/php/fpm \
--with-config-file-scan-dir=/etc/php/fpm/conf.d \
--with-curl \
--with-fpm-systemd \
--with-freetype-dir \
--with-gd \
--with-gettext \
--with-gmp \
--with-gnu-ld \
--with-iconv \
--with-imap \
--with-imap-ssl \
--with-jpeg-dir \
--with-kerberos \
--with-layout=GNU \
--with-ldap \
--with-ldap-sasl \
--with-libxml-dir \
--with-mcrypt \
--with-mhash=yes \
--with-mysqli=mysqlnd \
--with-mysql-sock=/var/run/mysqld/mysqld.sock \
--with-onig \
--with-openssl \
--with-pcre-regex \
--with-pdo-mysql=mysqlnd \
--with-pear \
--with-pic \
--with-png-dir \
--with-pspell \
--with-snmp \
--with-sqlite3 \
--with-tidy \
--with-xmlrpc \
--with-xpm-dir \
--with-xsl \
--with-zlib \
--disable-debug \
--disable-ipv6 \
--disable-rpath

depends.sh

# Install MariaDB
apt-get install mariadb-server

# Depends
apt-get install build-essential pkg-config bison libbz2-dev libc-client2007e-dev libcurl4-openssl-dev libgd-dev libgmp3-dev libicu-dev libjpeg-dev libkrb5-dev libmcrypt-dev libsnmp-dev libpspell-dev zlib1g-dev libpcre3-dev libsqlite3-dev libssl-dev libtidy-dev libxml2-dev libxslt1-dev libsasl2-dev libsystemd-dev

mklink.sh

ln -s x86_64-linux-gnu/gmp.h /usr/include/gmp.h
ln -s x86_64-linux-gnu/liblber.a /usr/lib/liblber.a
ln -s x86_64-linux-gnu/liblber.so /usr/lib/liblber.so

php-fpm

#!/bin/sh
### BEGIN INIT INFO
# Provides:          php-fpm
# Required-Start:    $remote_fs $network
# Required-Stop:     $remote_fs $network
# Default-Start:     2 3 4 5
# Default-Stop:      0 1 6    
# Short-Description: starts php-fpm
# Description:       Starts The PHP FastCGI Process Manager Daemon
### END INIT INFO

# File located at /etc/init.d/php-fpm

# Author: Ondrej Sury <ondrej@debian.org>

PATH=/sbin:/usr/sbin:/bin:/usr/bin
DESC="PHP FastCGI Process Manager"
NAME=php-fpm
DAEMON=/usr/sbin/$NAME
DAEMON_ARGS="--daemonize --fpm-config /etc/php/fpm/php-fpm.conf"
CONF_PIDFILE=$(sed -n 's/^pid[ =]*//p' /etc/php/fpm/php-fpm.conf)
PIDFILE=${CONF_PIDFILE:-/run/php-fpm.pid}
TIMEOUT=30
SCRIPTNAME=/etc/init.d/$NAME

# Exit if the package is not installed
[ -x "$DAEMON" ] || exit 0

# Read configuration variable file if it is present
[ -r /etc/default/$NAME ] && . /etc/default/$NAME

# Load the VERBOSE setting and other rcS variables
. /lib/init/vars.sh

# Define LSB log_* functions.
# Depend on lsb-base (>= 3.0-6) to ensure that this file is present.
. /lib/lsb/init-functions

# Don't run if we are running upstart
if init_is_upstart; then
    exit 1
fi

#
# Function to check the correctness of the config file
#
do_check()
{
    /usr/local/php-7.0.0/bin/php-fpm-checkconf || return 1
    return 0
}

#
# Function that starts the daemon/service
#
do_start()
{
    # Return
    #   0 if daemon has been started
    #   1 if daemon was already running
    #   2 if daemon could not be started
    start-stop-daemon --start --quiet --pidfile $PIDFILE --exec $DAEMON --test > /dev/null \
        || return 1
    start-stop-daemon --start --quiet --pidfile $PIDFILE --exec $DAEMON -- \
        $DAEMON_ARGS 2>/dev/null \
        || return 2
    # Add code here, if necessary, that waits for the process to be ready
    # to handle requests from services started subsequently which depend
    # on this one.  As a last resort, sleep for some time.
}

#
# Function that stops the daemon/service
#
do_stop()
{
    # Return
    #   0 if daemon has been stopped
    #   1 if daemon was already stopped
    #   2 if daemon could not be stopped
    #   other if a failure occurred
    start-stop-daemon --stop --quiet --retry=QUIT/$TIMEOUT/TERM/5/KILL/5 --pidfile $PIDFILE --name $NAME
    RETVAL="$?"
    [ "$RETVAL" = 2 ] && return 2
    # Wait for children to finish too if this is a daemon that forks
    # and if the daemon is only ever run from this initscript.
    # If the above conditions are not satisfied then add some other code
    # that waits for the process to drop all resources that could be
    # needed by services started subsequently.  A last resort is to
    # sleep for some time.
    start-stop-daemon --stop --quiet --oknodo --retry=0/30/TERM/5/KILL/5 --exec $DAEMON
    [ "$?" = 2 ] && return 2
    # Many daemons don't delete their pidfiles when they exit.
    rm -f $PIDFILE
    return "$RETVAL"
}

#
# Function that sends a SIGHUP to the daemon/service
#
do_reload() {
    #
    # If the daemon can reload its configuration without
    # restarting (for example, when it is sent a SIGHUP),
    # then implement that here.
    #
    start-stop-daemon --stop --signal USR2 --quiet --pidfile $PIDFILE --name $NAME
    return 0
}

case "$1" in
    start)
    [ "$VERBOSE" != no ] && log_daemon_msg "Starting $DESC" "$NAME"
    do_check $VERBOSE
    case "$?" in
        0)
        do_start
        case "$?" in
            0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;;
            2) [ "$VERBOSE" != no ] && log_end_msg 1 ;;
        esac
        ;;
        1) [ "$VERBOSE" != no ] && log_end_msg 1 ;;
    esac
    ;;
    stop)
    [ "$VERBOSE" != no ] && log_daemon_msg "Stopping $DESC" "$NAME"
    do_stop
    case "$?" in
        0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;;
        2) [ "$VERBOSE" != no ] && log_end_msg 1 ;;
    esac
    ;;
    status)
        status_of_proc "$DAEMON" "$NAME" && exit 0 || exit $?
        ;;
    check)
        do_check yes
    ;;
    reload|force-reload)
    log_daemon_msg "Reloading $DESC" "$NAME"
    do_reload
    log_end_msg $?
    ;;
    reopen-logs)
    log_daemon_msg "Reopening $DESC logs" $NAME
    if start-stop-daemon --stop --signal USR1 --oknodo --quiet \
        --pidfile $PIDFILE --exec $DAEMON
    then
        log_end_msg 0
    else
        log_end_msg 1
    fi
    ;;
    restart)
    log_daemon_msg "Restarting $DESC" "$NAME"
    do_stop
    case "$?" in
      0|1)
        do_start
        case "$?" in
            0) log_end_msg 0 ;;
            1) log_end_msg 1 ;; # Old process is still running
            *) log_end_msg 1 ;; # Failed to start
        esac
        ;;
      *)
          # Failed to stop
        log_end_msg 1
        ;;
    esac
    ;;
    *)
    echo "Usage: $SCRIPTNAME {start|stop|status|restart|reload|force-reload}" >&2
    exit 1
    ;;
esac

:

php-fpm-checkconf

#!/bin/sh
# File located at /usr/local/php-7.0.0/bin/php-fpm-checkconf
set -e
errors=$(/usr/local/php-7.0.0/sbin/php-fpm --fpm-config /etc/php/fpm/php-fpm.conf -t 2>&1 | grep "\[ERROR\]" || true);
if [ -n "$errors" ]; then
    echo "Please fix your configuration file..."
    echo $errors
    exit 1
fi
exit 0

php-fpm.conf

;;;;;;;;;;;;;;;;;;;;;
; FPM Configuration ;
;;;;;;;;;;;;;;;;;;;;;
; File located at /etc/php/fpm/php-fpm.conf

; All relative paths in this configuration file are relative to PHP's install
; prefix (/usr). This prefix can be dynamically changed by using the
; '-p' argument from the command line.

; Include one or more files. If glob(3) exists, it is used to include a bunch of
; files from a glob(3) pattern. This directive can be used everywhere in the
; file.
; Relative path can also be used. They will be prefixed by:
;  - the global prefix if it's been set (-p argument)
;  - /usr otherwise
;include=/etc/php/fpm/*.conf

;;;;;;;;;;;;;;;;;;
; Global Options ;
;;;;;;;;;;;;;;;;;;

[global]
; Pid file
; Note: the default prefix is /var
; Default Value: none
pid = /run/php-fpm.pid

; Error log file
; If it's set to "syslog", log is sent to syslogd instead of being written
; in a local file.
; Note: the default prefix is /var
; Default Value: log/php-fpm.log
error_log = /var/log/php-fpm.log

; syslog_facility is used to specify what type of program is logging the
; message. This lets syslogd specify that messages from different facilities
; will be handled differently.
; See syslog(3) for possible values (ex daemon equiv LOG_DAEMON)
; Default Value: daemon
;syslog.facility = daemon

; syslog_ident is prepended to every message. If you have multiple FPM
; instances running on the same server, you can change the default value
; which must suit common needs.
; Default Value: php-fpm
;syslog.ident = php-fpm

; Log level
; Possible Values: alert, error, warning, notice, debug
; Default Value: notice
;log_level = notice

; If this number of child processes exit with SIGSEGV or SIGBUS within the time
; interval set by emergency_restart_interval then FPM will restart. A value
; of '0' means 'Off'.
; Default Value: 0
;emergency_restart_threshold = 0

; Interval of time used by emergency_restart_interval to determine when
; a graceful restart will be initiated.  This can be useful to work around
; accidental corruptions in an accelerator's shared memory.
; Available Units: s(econds), m(inutes), h(ours), or d(ays)
; Default Unit: seconds
; Default Value: 0
;emergency_restart_interval = 0

; Time limit for child processes to wait for a reaction on signals from master.
; Available units: s(econds), m(inutes), h(ours), or d(ays)
; Default Unit: seconds
; Default Value: 0
;process_control_timeout = 0

; The maximum number of processes FPM will fork. This has been design to control
; the global number of processes when using dynamic PM within a lot of pools.
; Use it with caution.
; Note: A value of 0 indicates no limit
; Default Value: 0
; process.max = 128

; Specify the nice(2) priority to apply to the master process (only if set)
; The value can vary from -19 (highest priority) to 20 (lower priority)
; Note: - It will only work if the FPM master process is launched as root
;       - The pool process will inherit the master process priority
;         unless it specified otherwise
; Default Value: no set
; process.priority = -19

; Send FPM to background. Set to 'no' to keep FPM in foreground for debugging.
; Default Value: yes
;daemonize = yes
 
; Set open file descriptor rlimit for the master process.
; Default Value: system defined value
;rlimit_files = 1024
 
; Set max core size rlimit for the master process.
; Possible Values: 'unlimited' or an integer greater or equal to 0
; Default Value: system defined value
;rlimit_core = 0

; Specify the event mechanism FPM will use. The following is available:
; - select     (any POSIX os)
; - poll       (any POSIX os)
; - epoll      (linux >= 2.5.44)
; - kqueue     (FreeBSD >= 4.1, OpenBSD >= 2.9, NetBSD >= 2.0)
; - /dev/poll  (Solaris >= 7)
; - port       (Solaris >= 10)
; Default Value: not set (auto detection)
;events.mechanism = epoll

; When FPM is build with systemd integration, specify the interval,
; in second, between health report notification to systemd.
; Set to 0 to disable.
; Available Units: s(econds), m(inutes), h(ours)
; Default Unit: seconds
; Default value: 10
;systemd_interval = 10

;;;;;;;;;;;;;;;;;;;;
; Pool Definitions ;
;;;;;;;;;;;;;;;;;;;;

; Multiple pools of child processes may be started with different listening
; ports and different management options.  The name of the pool will be
; used in logs and stats. There is no limitation on the number of pools which
; FPM can handle. Your system will tell you anyway :)

; To configure the pools it is recommended to have one .conf file per
; pool in the following directory:
include=/etc/php/fpm/pool.d/*.conf

php-fpm.service

# File located at /lib/systemd/system/php-fpm.service
[Unit]
Description=The PHP FastCGI Process Manager
After=syslog.target network.target

[Service]
Type=notify
PIDFile=/var/run/php-fpm.pid
ExecStartPre=/usr/local/php-7.0.0/bin/php-fpm-checkconf
ExecStart=/usr/local/php-7.0.0/sbin/php-fpm --nodaemonize --fpm-config /etc/php/fpm/php-fpm.conf
ExecReload=/bin/kill -USR2 $MAINPID

[Install]
WantedBy=multi-user.target