Last active
August 29, 2015 13:57
-
-
Save ngreatorex/9769713 to your computer and use it in GitHub Desktop.
dmesg after boot on Mirabox
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
mirabox ~ # dmesg | |
[ 0.160867] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 | |
[ 0.160878] pci 0000:00:02.0: scanning [bus 00-00] behind bridge, pass 1 | |
[ 0.161899] pci_bus 0000:02: scanning bus | |
[ 0.161942] pci 0000:02:00.0: [1b73:1009] type 00 class 0x0c0330 | |
[ 0.161980] pci 0000:02:00.0: reg 0x10: [mem 0x42000000-0x4200ffff 64bit] | |
[ 0.162004] pci 0000:02:00.0: reg 0x18: [mem 0x42010000-0x42010fff 64bit] | |
[ 0.162028] pci 0000:02:00.0: reg 0x20: [mem 0x42011000-0x42011fff 64bit] | |
[ 0.162056] pci 0000:02:00.0: calling pci_fixup_ide_bases+0x0/0x3c | |
[ 0.162130] pci 0000:02:00.0: supports D1 | |
[ 0.162137] pci 0000:02:00.0: PME# supported from D0 D1 D3hot | |
[ 0.162149] pci 0000:02:00.0: PME# disabled | |
[ 0.162432] pci_bus 0000:02: fixups for bus | |
[ 0.162448] PCI: bus2: Fast back to back transfers disabled | |
[ 0.162456] pci_bus 0000:02: bus scan returning with max=02 | |
[ 0.162466] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02 | |
[ 0.162476] pci_bus 0000:00: bus scan returning with max=02 | |
[ 0.162487] pci 0000:00:01.0: fixup irq: got 0 | |
[ 0.162494] pci 0000:00:01.0: assigning IRQ 00 | |
[ 0.162502] pci 0000:00:02.0: fixup irq: got 0 | |
[ 0.162509] pci 0000:00:02.0: assigning IRQ 00 | |
[ 0.162563] pci 0000:02:00.0: fixup irq: got 106 | |
[ 0.162571] pci 0000:02:00.0: assigning IRQ 106 | |
[ 0.162605] pci 0000:00:02.0: BAR 14: assigned [mem 0xe0000000-0xe00fffff] | |
[ 0.162613] pci 0000:00:01.0: PCI bridge to [bus 01] | |
[ 0.162629] pci 0000:02:00.0: BAR 0: assigned [mem 0xe0000000-0xe000ffff 64bit] | |
[ 0.162652] pci 0000:02:00.0: BAR 0: set to [mem 0xe0000000-0xe000ffff 64bit] (PCI address [0xe0000000-0xe000ffff]) | |
[ 0.162662] pci 0000:02:00.0: BAR 2: assigned [mem 0xe0010000-0xe0010fff 64bit] | |
[ 0.162681] pci 0000:02:00.0: BAR 2: set to [mem 0xe0010000-0xe0010fff 64bit] (PCI address [0xe0010000-0xe0010fff]) | |
[ 0.162690] pci 0000:02:00.0: BAR 4: assigned [mem 0xe0011000-0xe0011fff 64bit] | |
[ 0.162709] pci 0000:02:00.0: BAR 4: set to [mem 0xe0011000-0xe0011fff 64bit] (PCI address [0xe0011000-0xe0011fff]) | |
[ 0.162717] pci 0000:00:02.0: PCI bridge to [bus 02] | |
[ 0.162726] pci 0000:00:02.0: bridge window [mem 0xe0000000-0xe00fffff] | |
[ 0.162774] pci 0000:02:00.0: calling quirk_usb_early_handoff+0x0/0x80c | |
[ 0.162787] PCI: enabling device 0000:00:02.0 (0140 -> 0143) | |
[ 0.162802] pci 0000:00:02.0: enabling bus mastering | |
[ 0.163059] mv_xor d0060800.xor: Marvell shared XOR driver | |
[ 0.200203] mv_xor d0060800.xor: Marvell XOR: ( xor cpy ) | |
[ 0.240210] mv_xor d0060800.xor: Marvell XOR: ( xor cpy ) | |
[ 0.240414] mv_xor d0060900.xor: Marvell shared XOR driver | |
[ 0.280208] mv_xor d0060900.xor: Marvell XOR: ( xor cpy ) | |
[ 0.320207] mv_xor d0060900.xor: Marvell XOR: ( xor cpy ) | |
[ 0.383297] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled | |
[ 0.405046] d0012000.serial: ttyS0 at MMIO 0xd0012000 (irq = 19, base_baud = 12500000) is a 16550A | |
[ 1.016080] console [ttyS0] enabled | |
[ 1.020015] kgdb: Registered I/O driver kgdboc. | |
[ 1.026134] pxa3xx-nand d00d0000.nand: This platform can't do DMA on this device | |
[ 1.033804] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0x38 | |
[ 1.040208] nand: Micron MT29F8G08ABABAWP | |
[ 1.044228] nand: 1024MiB, SLC, page size: 4096, OOB size: 224 | |
[ 1.050728] Bad block table found at page 262016, version 0x01 | |
[ 1.057223] Bad block table found at page 261888, version 0x01 | |
[ 1.063685] 3 ofpart partitions found on MTD device pxa3xx_nand-0 | |
[ 1.069791] Creating 3 MTD partitions on "pxa3xx_nand-0": | |
[ 1.075224] 0x000000000000-0x000000400000 : "U-Boot" | |
[ 1.080548] 0x000000400000-0x000000800000 : "Linux" | |
[ 1.085708] 0x000000800000-0x000040000000 : "Filesystem" | |
[ 1.093073] libphy: orion_mdio_bus: probed | |
[ 1.100785] mvneta d0070000.ethernet eth0: Using hardware mac address f0:ad:4e:01:e3:e5 | |
[ 1.111449] mvneta d0074000.ethernet eth1: Using random mac address 6a:d2:a7:8c:0f:bf | |
[ 1.119449] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver | |
[ 1.126043] ehci-pci: EHCI PCI platform driver | |
[ 1.130740] ehci-orion: EHCI orion driver | |
[ 1.134869] orion-ehci d0050000.usb: EHCI Host Controller | |
[ 1.140335] orion-ehci d0050000.usb: new USB bus registered, assigned bus number 1 | |
[ 1.148103] orion-ehci d0050000.usb: irq 25, io mem 0xd0050000 | |
[ 1.170148] orion-ehci d0050000.usb: USB 2.0 started, EHCI 1.00 | |
[ 1.176787] hub 1-0:1.0: USB hub found | |
[ 1.180602] hub 1-0:1.0: 1 port detected | |
[ 1.184775] orion-ehci d0051000.usb: EHCI Host Controller | |
[ 1.190229] orion-ehci d0051000.usb: new USB bus registered, assigned bus number 2 | |
[ 1.197895] orion-ehci d0051000.usb: irq 26, io mem 0xd0051000 | |
[ 1.220154] orion-ehci d0051000.usb: USB 2.0 started, EHCI 1.00 | |
[ 1.226745] hub 2-0:1.0: USB hub found | |
[ 1.230563] hub 2-0:1.0: 1 port detected | |
[ 1.234874] xhci_hcd 0000:02:00.0: enabling bus mastering | |
[ 1.234888] xhci_hcd 0000:02:00.0: xHCI Host Controller | |
[ 1.240166] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 3 | |
[ 1.247886] xhci_hcd 0000:02:00.0: enabling Mem-Wr-Inval | |
[ 1.248673] hub 3-0:1.0: USB hub found | |
[ 1.252525] hub 3-0:1.0: 2 ports detected | |
[ 1.256757] xhci_hcd 0000:02:00.0: xHCI Host Controller | |
[ 1.262030] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 4 | |
[ 1.270073] hub 4-0:1.0: USB hub found | |
[ 1.273887] hub 4-0:1.0: 2 ports detected | |
[ 1.278442] usbcore: registered new interface driver usb-storage | |
[ 1.284847] mousedev: PS/2 mouse device common for all mice | |
[ 1.291139] rtc-mv d0010300.rtc: rtc core: registered d0010300.rtc as rtc0 | |
[ 1.340154] mvsdio d00d4000.mvsdio: lacking card detect (fall back to polling) | |
[ 1.347628] ledtrig-cpu: registered to indicate activity on CPUs | |
[ 1.355338] TCP: cubic registered | |
[ 1.358666] NET: Registered protocol family 17 | |
[ 1.366245] UBI: attaching mtd2 to ubi0 | |
[ 1.392903] mmc0: new high speed SDIO card at address 0001 | |
[ 1.500167] usb 1-1: new high-speed USB device number 2 using orion-ehci | |
[ 1.651732] hub 1-1:1.0: USB hub found | |
[ 1.655762] hub 1-1:1.0: 4 ports detected | |
[ 1.758254] random: nonblocking pool is initialized | |
[ 1.940310] usb 1-1.1: new high-speed USB device number 3 using orion-ehci | |
[ 2.075424] usb-storage 1-1.1:1.0: USB Mass Storage device detected | |
[ 2.082023] usb-storage 1-1.1:1.0: Quirks match for vid 05e3 pid 0723: 8000 | |
[ 2.089093] scsi0 : usb-storage 1-1.1:1.0 | |
[ 2.170430] usb 1-1.2: new high-speed USB device number 4 using orion-ehci | |
[ 2.305354] usb-storage 1-1.2:1.0: USB Mass Storage device detected | |
[ 2.311927] usb-storage 1-1.2:1.0: Quirks match for vid 05e3 pid 0723: 8000 | |
[ 2.318971] scsi1 : usb-storage 1-1.2:1.0 | |
[ 2.756957] UBI: scanning is finished | |
[ 2.766397] UBI warning: print_rsvd_warning: cannot reserve enough PEBs for bad PEB handling, reserved 20, need 32 | |
[ 2.777723] UBI: attached mtd2 (name "Filesystem", size 1016 MiB) to ubi0 | |
[ 2.784567] UBI: PEB size: 524288 bytes (512 KiB), LEB size: 516096 bytes | |
[ 2.791383] UBI: min./max. I/O unit sizes: 4096/4096, sub-page size 4096 | |
[ 2.798095] UBI: VID header offset: 4096 (aligned 4096), data offset: 8192 | |
[ 2.804988] UBI: good PEBs: 2024, bad PEBs: 8, corrupted PEBs: 0 | |
[ 2.811011] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128 | |
[ 2.818157] UBI: max/mean erase counter: 7/4, WL threshold: 4096, image sequence number: 0 | |
[ 2.826441] UBI: available PEBs: 0, total reserved PEBs: 2024, PEBs reserved for bad PEB handling: 20 | |
[ 2.835713] UBI: background thread "ubi_bgt0d" started, PID 1005 | |
[ 2.842212] rtc-mv d0010300.rtc: setting system clock to 2014-03-25 19:41:11 UTC (1395776471) | |
[ 2.851737] Waiting for root device PARTUUID=0cc94d5a-02... | |
[ 3.091864] scsi 0:0:0:0: Direct-Access Generic STORAGE DEVICE 9451 PQ: 0 ANSI: 0 | |
[ 3.103911] sd 0:0:0:0: [sda] Attached SCSI removable disk | |
[ 3.321723] scsi 1:0:0:0: Direct-Access Generic STORAGE DEVICE 9451 PQ: 0 ANSI: 0 | |
[ 3.492595] sd 1:0:0:0: [sdb] 31116288 512-byte logical blocks: (15.9 GB/14.8 GiB) | |
[ 3.501185] sd 1:0:0:0: [sdb] Write Protect is off | |
[ 3.505990] sd 1:0:0:0: [sdb] Mode Sense: 03 00 00 00 | |
[ 3.507044] sd 1:0:0:0: [sdb] No Caching mode page found | |
[ 3.512388] sd 1:0:0:0: [sdb] Assuming drive cache: write through | |
[ 3.522875] sd 1:0:0:0: [sdb] No Caching mode page found | |
[ 3.528210] sd 1:0:0:0: [sdb] Assuming drive cache: write through | |
[ 3.535503] sdb: sdb1 sdb2 | |
[ 3.541952] sd 1:0:0:0: [sdb] No Caching mode page found | |
[ 3.547281] sd 1:0:0:0: [sdb] Assuming drive cache: write through | |
[ 3.553429] sd 1:0:0:0: [sdb] Attached SCSI removable disk | |
[ 3.621940] EXT3-fs (sdb2): error: couldn't mount because of unsupported optional features (240) | |
[ 3.632347] EXT2-fs (sdb2): error: couldn't mount because of unsupported optional features (240) | |
[ 3.655297] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null) | |
[ 3.663042] VFS: Mounted root (ext4 filesystem) readonly on device 8:18. | |
[ 3.669908] Freeing unused kernel memory: 208K (c057c000 - c05b0000) | |
[ 5.270403] pca953x 0-0025: failed reading register | |
[ 5.745975] cfg80211: Calling CRDA to update world regulatory domain | |
[ 6.634559] cfg80211: World regulatory domain updated: | |
[ 6.639738] cfg80211: DFS Master region: unset | |
[ 6.644155] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) | |
[ 6.652559] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) | |
[ 6.660347] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) | |
[ 6.668104] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) | |
[ 6.675874] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) | |
[ 6.683640] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) | |
[ 7.190308] mwifiex_sdio mmc0:0001:1: WLAN FW is active | |
[ 7.439266] EXT4-fs (sdb2): re-mounted. Opts: (null) | |
[ 7.603008] ieee80211 phy0: ignoring F/W country code US | |
[ 7.615088] mwifiex_sdio mmc0:0001:1: driver_version = mwifiex 1.0 (14.66.9.p96) | |
[ 9.749801] FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. | |
[ 11.228478] NET: Registered protocol family 10 | |
[ 11.450862] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready | |
[ 12.424901] ip_tables: (C) 2000-2006 Netfilter Core Team | |
[ 14.583191] Netfilter messages via NETLINK v0.30. | |
[ 14.730395] nf_conntrack version 0.5.0 (16143 buckets, 64572 max) | |
[ 15.227588] xt_time: kernel timezone is -0000 | |
[ 15.434198] ctnetlink v0.93: registering with nfnetlink. | |
[ 16.450596] mvneta d0070000.ethernet eth0: link up | |
[ 16.458134] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready | |
[ 16.506231] cfg80211: Calling CRDA for country: GB | |
[ 16.553012] cfg80211: Regulatory domain changed to country: GB | |
[ 16.558870] cfg80211: DFS Master region: unset | |
[ 16.563276] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) | |
[ 16.571673] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) | |
[ 16.579082] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) | |
[ 16.586572] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) | |
[ 16.594095] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm) | |
[ 16.826083] 8021q: 802.1Q VLAN Support v1.8 | |
[ 16.837526] mwifiex_sdio mmc0:0001:1: CMD_RESP: cmd 0x112 error, result=0x2 | |
[ 19.928788] Bluetooth: Core ver 2.18 | |
[ 19.932521] NET: Registered protocol family 31 | |
[ 19.936987] Bluetooth: HCI device and connection manager initialized | |
[ 19.943387] Bluetooth: HCI socket layer initialized | |
[ 19.948279] Bluetooth: L2CAP socket layer initialized | |
[ 19.953377] Bluetooth: SCO socket layer initialized | |
[ 20.020797] Bluetooth: RFCOMM TTY layer initialized | |
[ 20.025754] Bluetooth: RFCOMM socket layer initialized | |
[ 20.030956] Bluetooth: RFCOMM ver 1.11 | |
[ 20.091650] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 | |
[ 20.097034] Bluetooth: BNEP socket layer initialized |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment