Last active
April 18, 2024 14:39
-
-
Save nikias/84c79469a1d0f16ff95250f0d51858c3 to your computer and use it in GitHub Desktop.
Build libimobiledevice stack for macOS with ease
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| #!/bin/bash | |
| # If you like this script and my work on libimobiledevice, please | |
| # consider becoming a patron at https://patreon.com/nikias - Thanks <3 | |
| REV=1.0.15 | |
| if test "`echo -e Test`" != "Test" 2>&1; then | |
| echo Please run this with zsh or bash. | |
| exit 1 | |
| fi | |
| if test -x "`which tput`"; then | |
| ncolors=`tput colors` | |
| if test -n "$ncolors" && test $ncolors -ge 8; then | |
| BOLD="$(tput bold)" | |
| UNDERLINE="$(tput smul)" | |
| STANDOUT="$(tput smso)" | |
| NORMAL="$(tput sgr0)" | |
| BLACK="$(tput setaf 0)" | |
| RED="$(tput setaf 1)" | |
| GREEN="$(tput setaf 2)" | |
| YELLOW="$(tput setaf 3)" | |
| BLUE="$(tput setaf 4)" | |
| MAGENTA="$(tput setaf 5)" | |
| CYAN="$(tput setaf 6)" | |
| WHITE="$(tput setaf 7)" | |
| fi | |
| fi | |
| echo -e "${BOLD}**** libimobiledevice stack build script for macOS, revision $REV ****${NORMAL}" | |
| INSTALL_STUFF=1 | |
| while getopts hyn flag | |
| do | |
| case "${flag}" in | |
| h) | |
| echo " | |
| This script will build the ${BOLD}libimobiledevice${NORMAL} stack for macOS consisting of | |
| ${YELLOW}libplist${NORMAL}, ${YELLOW}libusbmuxd${NORMAL}, ${YELLOW}libimobiledevice${NORMAL}, ${YELLOW}libimobiledevice-glue${NORMAL}, ${YELLOW}libirecovery${NORMAL}, | |
| ${YELLOW}idevicerestore${NORMAL}, ${YELLOW}libideviceactivation${NORMAL}, ${YELLOW}ideviceinstaller${NORMAL}, and ${YELLOW}ifuse${NORMAL} (requires | |
| macFUSE) with the least amount of external dependencies. Besides command line | |
| tools and the compiler for the build process (and optionally macFUSE) | |
| currently the only external dependency is libzip which will be statically | |
| linked. | |
| Everything needed for the build process will be automatically downloaded, | |
| built, and installed. The built libraries and tools will be installed in | |
| the default prefix /usr/local. This can be changed by setting the PREFIX | |
| environment variable. This script will run sudo if the install prefix is | |
| not writeable for the current user, so it might ask for your password. | |
| NOTE: It is *not* recommended to run this script as root. Instead you should | |
| set the DESTDIR environment variable to specify a writeable install location. | |
| Available options: | |
| -h Print this help text. | |
| -y Assume yes for steps that require user confirmation. | |
| -n Do not ask for confirmation and do not attempt to install third party | |
| software (like macFUSE) during the process. This will still allow | |
| installation of required tools within the source tree. | |
| " | |
| exit 0 | |
| ;; | |
| y) | |
| DONTASK=1 | |
| ;; | |
| n) | |
| unset DONTASK | |
| unset INSTALL_STUFF | |
| ;; | |
| esac | |
| done | |
| echo -e "Run $0 -h for help." | |
| if test $UID -eq 0; then | |
| if test -z $RUN_AS_ROOT; then | |
| echo -e "${RED}WARNING: It is *NOT* recommended to run this script as root. See -h for help.${NORMAL}" | |
| echo -e "If you still want to run it as root, set environment variable RUN_AS_ROOT=1" | |
| exit 1 | |
| else | |
| echo -e "${RED}WARNING: Running as root (enforced via env RUN_AS_ROOT)${NORMAL}" | |
| fi | |
| fi | |
| TESTCOMMANDS="xcrun clang" | |
| for TESTCMD in ${TESTCOMMANDS}; do | |
| if ! test -x "`which $TESTCMD`"; then | |
| echo -e "${RED}FATAL: Xcode with command line tools is required. Please install and run again.${NORMAL}" | |
| exit 1 | |
| fi | |
| done | |
| if test -z "$CFLAGS"; then | |
| SDKDIR=`xcrun --sdk macosx --show-sdk-path 2>/dev/null` | |
| TESTARCHS="arm64 x86_64" | |
| USEARCHS= | |
| for ARCH in $TESTARCHS; do | |
| if echo "int main(int argc, char **argv) { return 0; }" |clang -arch $ARCH -o /dev/null -isysroot $SDKDIR -x c - 2>/dev/null; then | |
| USEARCHS="$USEARCHS -arch $ARCH" | |
| fi | |
| done | |
| export CFLAGS="$USEARCHS -isysroot $SDKDIR" | |
| else | |
| echo -e "${YELLOW}NOTE: Using externally defined CFLAGS. If that's not what you want, run: unset CFLAGS${NORMAL}" | |
| if test -z "$SDKDIR"; then | |
| SDKDIR=`xcrun --sdk macosx --show-sdk-path 2>/dev/null` | |
| echo -e "${YELLOW}NOTE: SDKDIR is not defined, using ${WHITE}$SDKDIR${NORMAL}" | |
| fi | |
| fi | |
| if test -z "$PREFIX"; then | |
| PREFIX="/usr/local" | |
| else | |
| echo -e "${YELLOW}NOTE: Using externally defined PREFIX. If that's not what you want, run: unset PREFIX${NORMAL}" | |
| fi | |
| echo -e "${BOLD}PREFIX:${NORMAL} ${GREEN}$PREFIX${NORMAL}" | |
| INSTALL_DIR=$PREFIX | |
| if test -n "$DESTDIR"; then | |
| case "$DESTDIR" in | |
| /*) export DESTDIR="$DESTDIR" ;; | |
| *) export DESTDIR="`pwd`/$DESTDIR" ;; | |
| esac | |
| mkdir -p "$DESTDIR" | |
| echo -e "${BOLD}DESTDIR:${NORMAL} ${GREEN}$DESTDIR${NORMAL}" | |
| INSTALL_DIR=$DESTDIR | |
| fi | |
| if ! test -w "$INSTALL_DIR"; then | |
| echo -e "${YELLOW}NOTE: During the process you will be asked for your password, this is to allow installation of the built libraries and tools via ${MAGENTA}sudo${YELLOW}.${NORMAL}" | |
| fi | |
| ########################################################### | |
| VERS=`sw_vers -productVersion` | |
| VMAJ=`echo $VERS |cut -d "." -f 1` | |
| VMIN=`echo $VERS |cut -d "." -f 2` | |
| ############# DEPENDENCY URLS AND FILE DATA ############### | |
| # autoconf | |
| AUTOCONF_URL=https://ftpmirror.gnu.org/gnu/autoconf/autoconf-2.69.tar.gz | |
| AUTOCONF_HASH=562471cbcb0dd0fa42a76665acf0dbb68479b78a | |
| # automake | |
| AUTOMAKE_URL=https://ftpmirror.gnu.org/gnu/automake/automake-1.16.3.tar.gz | |
| AUTOMAKE_HASH=b36e3877d961c1344351cc97b35b683a4dfadc0c | |
| # libtool | |
| LIBTOOL_URL=https://ftpmirror.gnu.org/gnu/libtool/libtool-2.4.6.tar.gz | |
| LIBTOOL_HASH=25b6931265230a06f0fc2146df64c04e5ae6ec33 | |
| # cmake | |
| if [ $VMAJ -le 10 ] && [ $VMIN -lt 13 ]; then | |
| if [ $VMIN -lt 10 ]; then | |
| # < macOS 10.10 | |
| CMAKE_URL=https://github.com/Kitware/CMake/releases/download/v3.18.6/cmake-3.18.6-Darwin-x86_64.tar.gz | |
| CMAKE_HASH=fe09f28c2bfe26a7b7daf0ff9444175f410bae36 | |
| else | |
| # >= macOS 10.10 | |
| CMAKE_URL=https://github.com/Kitware/CMake/releases/download/v3.20.1/cmake-3.20.1-macos10.10-universal.tar.gz | |
| CMAKE_HASH=668e554a7fa7ad57eaf73d374774afd7fd25f98f | |
| fi | |
| else | |
| # >= macOS 10.13 | |
| CMAKE_URL=https://github.com/Kitware/CMake/releases/download/v3.20.1/cmake-3.20.1-macos-universal.tar.gz | |
| CMAKE_HASH=43cc6b91ca2ec711f3a1a3eafb970f9389e795e2 | |
| fi | |
| # libzip | |
| LIBZIP_URL=https://github.com/nih-at/libzip/releases/download/v1.7.1/libzip-1.7.1.tar.gz | |
| LIBZIP_VERSION=1.7.1 | |
| LIBZIP_HASH=22a7a9b13357015275d017d0ca1b75e69abe1db9 | |
| # macFUSE | |
| if [ $VMAJ -le 10 ] && [ $VMIN -lt 12 ]; then | |
| # <= macOS 10.11 | |
| MFUSE_URL=https://github.com/osxfuse/osxfuse/releases/download/macfuse-4.0.5/macfuse-4.0.5.dmg | |
| MFUSE_HASH=2056c833aa8996d03748687bc938ba9805cc77a5 | |
| else | |
| # macOS >= 10.12 | |
| MFUSE_URL=https://github.com/osxfuse/osxfuse/releases/download/macfuse-4.1.2/macfuse-4.1.2.dmg | |
| MFUSE_HASH=a12e1f8d5e33baaa075e1a59986922eaa45162a2 | |
| fi | |
| ############# CHECK REQUIRED COMMANDS ##################### | |
| if test -x "`which shasum`"; then | |
| SHA1SUM="`which shasum`" | |
| SHA256SUM="$SHA1SUM -a 256" | |
| elif test -x "`which sha1sum`"; then | |
| SHA1SUM="`which sha1sum`" | |
| fi | |
| if test -z "$SHA1SUM"; then | |
| echo -e "${RED}FATAL: no shasum or sha1sum found.${NORMAL}" | |
| exit 1 | |
| fi | |
| if test -z "$SHA256SUM"; then | |
| if test -x "`which sha256sum`"; then | |
| SHA256SUM="`which sha256sum`" | |
| fi | |
| fi | |
| if test -z "$SHA256SUM"; then | |
| echo -e "${RED}FATAL: no sha256sum found.${NORMAL}" | |
| exit 1 | |
| fi | |
| TESTCOMMANDS="strings dirname cut grep find curl tar gunzip git make sudo" | |
| for TESTCMD in ${TESTCOMMANDS}; do | |
| if ! test -x "`which $TESTCMD`"; then | |
| echo -e "${RED}FATAL: Required command '$TESTCMD' is not available.${NORMAL}" | |
| exit 1 | |
| fi | |
| done | |
| CURL="`which curl`" | |
| if test -x "/usr/bin/curl" && test "$CURL" != "/usr/bin/curl"; then | |
| CURL=/usr/bin/curl | |
| fi | |
| if test -f "/usr/local/include/openssl/opensslv.h"; then | |
| echo -e "${RED}ERROR: You have OpenSSL headers installed in /usr/local/include/openssl | |
| and compiling libimobiledevice will fail.${NORMAL} | |
| You can either uninstall the OpenSSL package or just temporarily rename it | |
| like this: | |
| ${YELLOW}sudo mv /usr/local/include/openssl /usr/local/include/openssl.bak${NORMAL} | |
| and once this script completes, just rename it back: | |
| ${YELLOW}sudo mv /usr/local/include/openssl.bak /usr/local/include/openssl${NORMAL} | |
| Aborting. | |
| " | |
| exit 1 | |
| fi | |
| echo "Checking for externally installed packages..." | |
| BREW_OR_PORTS_INSTALL= | |
| if test -x "`which brew`"; then | |
| BREW_OR_PORTS_INSTALL="brew install" | |
| elif test -x "`which port`"; then | |
| BREW_OR_PORTS_INSTALL="sudo port install" | |
| fi | |
| CHECKPKGS="idevicerestore ideviceinstaller libimobiledevice libusbmuxd libplist libimobiledevice-glue libirecovery libideviceactivation ifuse" | |
| for PKG in $CHECKPKGS; do | |
| PKG_INSTALLED= | |
| if test -x "`which brew`"; then | |
| if brew list $PKG >/dev/null 2>/dev/null; then | |
| PKG_INSTALLED="brew" | |
| PKG_UNINSTALL_CMD="brew uninstall" | |
| fi | |
| fi | |
| if test -x "`which port`"; then | |
| if test -n "`port installed $PKG 2>/dev/null |grep active`"; then | |
| PKG_INSTALLED="macports" | |
| PKG_UNINSTALL_CMD="sudo port uninstall" | |
| fi | |
| fi | |
| if test -n "$PKG_INSTALLED"; then | |
| echo -e "${RED}WARNING: ${YELLOW}$PKG${RED} is already installed through ${PKG_INSTALLED}!${NORMAL} | |
| Unless you know exactly what you are doing it is recommended to uninstall the | |
| package first by running: ${YELLOW}${BREW_OR_PORTS_UNINSTALL} $PKG${NORMAL}" | |
| echo | |
| echo -e "Choose one of these options:" | |
| echo -e " [a] Abort now and do nothing" | |
| echo -e " [r] Run the uninstall command, then continue" | |
| echo -e " [c] Continue without doing anything" | |
| read -r -p "${BOLD}Your choice? [A/r/c]${NORMAL} " response | |
| case "$response" in | |
| [rR]) | |
| echo -e "Running ${YELLOW}$PKG_UNINSTALL_CMD $PKG${NORMAL}..." | |
| $PKG_UNINSTALL_CMD $PKG 2>/dev/null || exit 1 | |
| ;; | |
| [cC]) | |
| ;; | |
| ""|*) | |
| echo "Aborting." | |
| exit 0 | |
| ;; | |
| esac | |
| fi | |
| done | |
| if test -z "$INSTALL_STUFF"; then | |
| unset BREW_OR_PORTS_INSTALL | |
| fi | |
| BASEDIR=`pwd` | |
| DEPSDIR="$BASEDIR/deps" | |
| mkdir -p "$DEPSDIR" | |
| cd "$DEPSDIR" | |
| rm -f "*.log" | |
| export PATH="$PATH:$DEPSDIR/bin" | |
| echo -e "${CYAN}######## INSTALLING REQUIRED TOOLS AND DEPENDENCIES ########${NORMAL}" | |
| #################### autoconf #################### | |
| if ! test -x "`which autoconf`"; then | |
| echo -e "${BOLD}*** Installing autoconf (in-tree)${NORMAL}" | |
| if test -z "$BREW_OR_PORTS_INSTALL"; then | |
| AUTOCONF_TGZ=`basename $AUTOCONF_URL` | |
| HASH=`$SHA1SUM "$AUTOCONF_TGZ" 2>/dev/null |cut -d " " -f 1` | |
| if test -z "$HASH" || test "$HASH" != "$AUTOCONF_HASH"; then | |
| echo "-- downloading autoconf" | |
| $CURL -LfsS -o $AUTOCONF_TGZ $AUTOCONF_URL || exit 1 | |
| HASH=`$SHA1SUM "$AUTOCONF_TGZ" 2>/dev/null |cut -d " " -f 1` | |
| if test -z "$HASH" || test "$HASH" != "$AUTOCONF_HASH"; then | |
| echo -e "${RED}FATAL: hash mismatch for $AUTOCONF_TGZ${NORMAL}" | |
| exit 1 | |
| fi | |
| fi | |
| tar xzf $AUTOCONF_TGZ | |
| cd `basename $AUTOCONF_TGZ .tar.gz` | |
| echo "-- configuring autoconf" | |
| ./configure --prefix="$DEPSDIR" >> ../autoconf-configure.log 2>&1 || exit 1 | |
| echo "-- building autoconf" | |
| make clean > /dev/null | |
| make >> ../autoconf-make.log 2>&1 || exit 1 | |
| echo "-- installing autoconf (in-tree)" | |
| make install >> ../autoconf-make_install.log 2>&1 || exit 1 | |
| cd $DEPSDIR | |
| else | |
| $BREW_OR_PORTS_INSTALL autoconf || exit 1 | |
| fi | |
| echo -e "${BOLD}* autoconf: ${GREEN}done${NORMAL}" | |
| else | |
| echo -e "${BOLD}* autoconf: ${GREEN}found${NORMAL}" | |
| fi | |
| #################### automake #################### | |
| if ! test -x "`which automake`"; then | |
| echo -e "${BOLD}*** Installing automake (in-tree)${NORMAL}" | |
| if test -z "$BREW_OR_PORTS_INSTALL"; then | |
| AUTOMAKE_TGZ=`basename $AUTOMAKE_URL` | |
| HASH=`$SHA1SUM "$AUTOMAKE_TGZ" 2>/dev/null |cut -d " " -f 1` | |
| if test -z "$HASH" || test "$HASH" != "$AUTOMAKE_HASH"; then | |
| echo "-- Downloading automake" | |
| $CURL -LfsS -o $AUTOMAKE_TGZ $AUTOMAKE_URL || exit 1 | |
| HASH=`$SHA1SUM "$AUTOMAKE_TGZ" 2>/dev/null |cut -d " " -f 1` | |
| if test -z "$HASH" || test "$HASH" != "$AUTOMAKE_HASH"; then | |
| echo -e "${RED}FATAL: hash mismatch for $AUTOMAKE_TGZ${NORMAL}" | |
| exit 1 | |
| fi | |
| fi | |
| tar xzf $AUTOMAKE_TGZ | |
| cd `basename $AUTOMAKE_TGZ .tar.gz` | |
| echo "-- Configuring automake" | |
| ./configure --prefix="$DEPSDIR" >> ../automake-configure.log 2>&1 || exit 1 | |
| echo "-- Building automake" | |
| make clean > /dev/null | |
| make >> ../automake-make.log 2>&1 || exit 1 | |
| echo "-- Installing automake (in-tree)" | |
| make install >> ../automake-make_install.log 2>&1 || exit 1 | |
| cd $DEPSDIR | |
| else | |
| $BREW_OR_PORTS_INSTALL automake || exit 1 | |
| fi | |
| echo -e "${BOLD}* automake: ${GREEN}done${NORMAL}" | |
| else | |
| echo -e "${BOLD}* automake: ${GREEN}found${NORMAL}" | |
| fi | |
| #################### libtool #################### | |
| if ! test -x "`which libtool`" || ! test -x "`which libtoolize`" -o -x "`which glibtoolize`"; then | |
| echo -e "${BOLD}*** Installing libtool (in-tree)${NORMAL}" | |
| if test -z "$BREW_OR_PORTS_INSTALL"; then | |
| LIBTOOL_TGZ=`basename $LIBTOOL_URL` | |
| HASH=`$SHA1SUM "$LIBTOOL_TGZ" 2>/dev/null |cut -d " " -f 1` | |
| if test -z "$HASH" || test "$HASH" != "$LIBTOOL_HASH"; then | |
| echo "-- Downloading libtool" | |
| $CURL -LfsS -o $LIBTOOL_TGZ $LIBTOOL_URL || exit 1 | |
| HASH=`$SHA1SUM "$LIBTOOL_TGZ" 2>/dev/null |cut -d " " -f 1` | |
| if test -z "$HASH" || test "$HASH" != "$LIBTOOL_HASH"; then | |
| echo -e "${RED}FATAL: hash mismatch for $LIBTOOL_TGZ${NORMAL}" | |
| exit 1 | |
| fi | |
| fi | |
| tar xzf $LIBTOOL_TGZ | |
| cd `basename $LIBTOOL_TGZ .tar.gz` | |
| echo "-- Configuring libtool" | |
| ./configure --prefix="$DEPSDIR" >> ../libtool-configure.log 2>&1 || exit 1 | |
| echo "-- Building libtool" | |
| make clean > /dev/null | |
| make >> ../libtool-make.log 2>&1 || exit 1 | |
| echo "-- Installing libtool (in-tree)" | |
| make install >> ../libtool-make_install.log 2>&1 || exit 1 | |
| cd $DEPSDIR | |
| else | |
| $BREW_OR_PORTS_INSTALL libtool || exit 1 | |
| fi | |
| echo -e "${BOLD}* libtool: ${GREEN}done${NORMAL}" | |
| else | |
| echo -e "${BOLD}* libtool: ${GREEN}found${NORMAL}" | |
| fi | |
| TESTCOMMANDS="autoconf automake libtool" # pkg-config" | |
| for TESTCMD in ${TESTCOMMANDS}; do | |
| if ! test -x "`which $TESTCMD`"; then | |
| echo -e "${RED}FATAL: required ${BOLD}$TESTCMD${RED} not found. Please install manually.${NORMAL}" | |
| err_cmd="$err_cmd $TESTCMD" | |
| fi | |
| done | |
| if test -n "$err_cmd"; then | |
| exit 1 | |
| fi | |
| INSTALL_SUDO= | |
| POSTINSTALL= | |
| if test -z $DESTDIR; then | |
| if ! test -w $PREFIX; then | |
| INSTALL_SUDO="sudo" | |
| fi | |
| fi | |
| ACLOCALDIR=$(dirname `automake --print-libdir`)/aclocal | |
| if ! test -f ${ACLOCALDIR}/pkg.m4; then | |
| $CURL -LfsS -o "$DEPSDIR/pkg.m4" https://raw.githubusercontent.com/pkgconf/pkgconf/master/pkg.m4 || exit 1 | |
| if test -w ${ACLOCALDIR}; then | |
| cp "$DEPSDIR/pkg.m4" "${ACLOCALDIR}/pkg.m4" | |
| else | |
| $INSTALL_SUDO cp "$DEPSDIR/pkg.m4" "${ACLOCALDIR}/pkg.m4" | |
| fi | |
| rm -f "$DEPSDIR/pkg.m4" | |
| fi | |
| ############## CMAKE for building libzip #################### | |
| if ! test -x "`which cmake`"; then | |
| echo -e "${BOLD}*** Installing cmake (in-tree)${NORMAL}" | |
| CMAKE_TGZ=`basename $CMAKE_URL` | |
| HASH=`$SHA1SUM "$CMAKE_TGZ" 2>/dev/null |cut -d " " -f 1` | |
| if test -z "$HASH" || test "$HASH" != "$CMAKE_HASH"; then | |
| echo "-- Downloading cmake" | |
| $CURL -LfsS -o "$CMAKE_TGZ" "$CMAKE_URL" || exit 1 | |
| fi | |
| CMAKE_PATH="$DEPSDIR/`basename $CMAKE_TGZ .tar.gz`/CMake.app/Contents/bin" | |
| CMAKE_BIN="$CMAKE_PATH/cmake" | |
| if ! test -x "$CMAKE_BIN"; then | |
| echo "-- Extracting cmake (in tree)" | |
| tar xzf "$CMAKE_TGZ" | |
| fi | |
| echo "-- Updating \$PATH" | |
| export PATH="$PATH:$CMAKE_PATH" | |
| if ! test -x "`which cmake`"; then | |
| echo -e "${RED}FATAL: cmake not found in \$PATH after trying to install it locally?!${NORMAL}" | |
| exit 1 | |
| fi | |
| echo -e "${BOLD}* cmake: ${GREEN}done${NORMAL}" | |
| else | |
| echo -e "${BOLD}* cmake: ${GREEN}found${NORMAL}" | |
| fi | |
| ############ lzma headers for libzip ############# | |
| if ! test -f "$DEPSDIR/xz-5.0.5/src/liblzma/api/lzma.h"; then | |
| echo -e "${BOLD}*** Installing lzma headers (in-tree)${NORMAL}" | |
| XZ_URL=https://sourceforge.net/projects/lzmautils/files/xz-5.0.5.tar.gz/download | |
| XZ_HASH=26fec2c1e409f736e77a85e4ab314dc74987def0 | |
| XZ_TGZ="xz-5.0.5.tar.gz" | |
| HASH=`$SHA1SUM "$XZ_TGZ" 2>/dev/null |cut -d " " -f 1` | |
| if test -z "$HASH" || test "$HASH" != "$XZ_HASH"; then | |
| echo "-- Downloading xz" | |
| $CURL -LfsS -o "$XZ_TGZ" "$XZ_URL" || exit 1 | |
| fi | |
| echo "-- Extracting xz" | |
| tar xzf "$XZ_TGZ" | |
| LZMA_INCLUDES="$DEPSDIR/xz-5.0.5/src/liblzma/api" | |
| if ! test -f "$LZMA_INCLUDES/lzma.h"; then | |
| echo -e "${RED}FATAL: lzma.h not found${NORMAL}" | |
| exit 1 | |
| fi | |
| echo -e "${BOLD}* lzma headers: ${GREEN}done${NORMAL}" | |
| else | |
| LZMA_INCLUDES="$DEPSDIR/xz-5.0.5/src/liblzma/api" | |
| echo -e "${BOLD}* lzma headers: ${GREEN}found${NORMAL}" | |
| fi | |
| ############ libzip ################### | |
| LIBZIP_FILENAME=`basename $LIBZIP_URL` | |
| LIBZIP_DIR=`basename $LIBZIP_FILENAME .tar.gz` | |
| if ! test -f $DEPSDIR/$LIBZIP_DIR/build/lib/libzip.a; then | |
| echo -e "${BOLD}*** Installing libzip (static, in-tree)${NORMAL}" | |
| HASH=`$SHA1SUM "LIBZIP_FILENAME" 2>/dev/null |cut -d " " -f 1` | |
| if test -z "$HASH" || test "$HASH" != "$LIBZIP_HASH"; then | |
| echo "-- Downloading libzip" | |
| $CURL -LfsS -o "$LIBZIP_FILENAME" "$LIBZIP_URL" || exit 1 | |
| fi | |
| echo "-- Extracting libzip" | |
| tar xzf "$LIBZIP_FILENAME" | |
| if test -z "$SDKDIR"; then | |
| SDKDIR=`xcrun --sdk macosx --show-sdk-path 2>/dev/null` | |
| fi | |
| CURDIR=`pwd` | |
| cd "$LIBZIP_DIR" | |
| rm -rf build | |
| mkdir build | |
| cd build | |
| echo "-- Configuring libzip (cmake)" | |
| cmake -DCMAKE_OSX_SYSROOT="${SDKDIR}" -DBUILD_SHARED_LIBS=OFF -DBUILD_DOC=OFF -DBUILD_EXAMPLES=OFF -DBUILD_REGRESS=OFF -DBUILD_TOOLS=OFF -DENABLE_GNUTLS=OFF -DENABLE_MBEDTLS=OFF -DENABLE_OPENSSL=OFF -DCMAKE_POLICY_DEFAULT_CMP0063=NEW -DCMAKE_LIBRARY_PATH="$SDKDIR/usr/lib" -DLIBLZMA_INCLUDE_DIR="$LZMA_INCLUDES" .. >> ../../libzip-cmake.log 2>&1 || exit 1 | |
| echo "-- Bulding libzip" | |
| make clean > /dev/null | |
| make >> ../../libzip-make.log 2>&1 || exit 1 | |
| cd "$CURDIR" | |
| echo -e "${BOLD}* libzip: ${GREEN}done${NORMAL}" | |
| else | |
| echo -e "${BOLD}* libzip: ${GREEN}found${NORMAL}" | |
| fi | |
| LIBZIP_CFLAGS="-I$DEPSDIR/$LIBZIP_DIR/lib -I$DEPSDIR/$LIBZIP_DIR/build" | |
| LIBZIP_LIBS="$DEPSDIR/$LIBZIP_DIR/build/lib/libzip.a -Xlinker $SDKDIR/usr/lib/libbz2.tbd -Xlinker $SDKDIR/usr/lib/liblzma.tbd -lz" | |
| ############ LibreSSL ############## | |
| if ! test -f "$LIBCRYPTO" || ! test -f "$LIBSSL"; then | |
| mkdir -p lib | |
| if ! test -f "lib/libssl.35.tbd"; then | |
| $CURL -o "lib/libssl.35.tbd" -LfsS \ | |
| https://gist.github.com/nikias/94c99fd145a75a5104415e5117b0cafa/raw/5209dfbff5a871a14272afe4794e76eb4cf6f062/libssl.35.tbd || exit 1 | |
| fi | |
| if ! test -f "lib/libcrypto.35.tbd"; then | |
| $CURL -o "lib/libcrypto.35.tbd" -LfsS \ | |
| https://gist.github.com/nikias/94c99fd145a75a5104415e5117b0cafa/raw/5209dfbff5a871a14272afe4794e76eb4cf6f062/libcrypto.35.tbd || exit 1 | |
| fi | |
| LIBSSL=$DEPSDIR/lib/libssl.35.tbd | |
| LIBCRYPTO=$DEPSDIR/lib/libcrypto.35.tbd | |
| LIBRESSL_VER=2.2.7 | |
| fi | |
| if ! test -f "$LIBCRYPTO"; then | |
| echo -e "${RED}ERROR: Could not find $LIBCRYPTO. Cannot continue.${NORMAL}" | |
| exit 1 | |
| else | |
| echo -e "${BOLD}* LibreSSL `basename $LIBSSL`: ${GREEN}found${NORMAL}" | |
| fi | |
| if ! test -f "$LIBSSL"; then | |
| echo -e "${RED}ERROR: Could not find $LIBSSL. Cannot continue.${NORMAL}" | |
| exit 1 | |
| else | |
| echo -e "${BOLD}* LibreSSL `basename $LIBCRYPTO`: ${GREEN}found${NORMAL}" | |
| fi | |
| if test -z "$LIBRESSL_VER"; then | |
| if LIBRESSL_VER_TMP=`strings "$LIBCRYPTO" |grep "^LibreSSL .\..\.."`; then | |
| LIBRESSL_VER=`echo $LIBRESSL_VER_TMP |cut -d " " -f 2` | |
| fi | |
| fi | |
| echo " ${YELLOW}LibreSSL version requirment: $LIBRESSL_VER${NORMAL}" | |
| if ! test -f "$DEPSDIR/libressl-$LIBRESSL_VER/include/openssl/opensslv.h"; then | |
| echo -e "${BOLD}*** Installing LibreSSL headers (in-tree)${NORMAL}" | |
| rm -rf libressl-$LIBRESSL_VER | |
| FILENAME="libressl-$LIBRESSL_VER.tar.gz" | |
| $CURL -LfsS -o "libressl.sha256.txt" "https://ftp.openbsd.org/pub/OpenBSD/LibreSSL/SHA256" || exit 1 | |
| CHKSUM=`cat "libressl.sha256.txt" |grep "($FILENAME)" |cut -d " " -f 4` | |
| rm -f "libressl.sha256.txt" | |
| if test -z "$CHKSUM"; then | |
| echo -e "${RED}ERROR: Failed to get checksum from server for $FILENAME${NORMAL}" | |
| exit 1 | |
| fi | |
| if test -f "$FILENAME"; then | |
| CALCSUM=`$SHA256SUM "$FILENAME" |cut -d " " -f 1` | |
| fi | |
| if test -z "$CALCSUM" -o "$CALCSUM" != "$CHKSUM"; then | |
| echo "-- Downloading $FILENAME${NORMAL}" | |
| $CURL -LfsS -o "$FILENAME" "https://ftp.openbsd.org/pub/OpenBSD/LibreSSL/$FILENAME" || exit 1 | |
| CALCSUM=`$SHA256SUM "$FILENAME" |cut -d " " -f 1` | |
| if test "$CALCSUM" != "$CHKSUM"; then | |
| echo -e "${RED}ERROR: Failed to verify $FILENAME (checksum mismatch).${NORMAL}" | |
| exit 1 | |
| fi | |
| else | |
| echo "-- Using cached $FILENAME" | |
| fi | |
| echo "-- Extracting $FILENAME" | |
| tar xzf "$FILENAME" || exit 1 | |
| echo -e "${BOLD}* LibreSSL headers: ${GREEN}done${NORMAL}" | |
| else | |
| echo -e "${BOLD}* LibreSSL headers: ${GREEN}found${NORMAL}" | |
| fi | |
| cd "$BASEDIR" | |
| ############ macFUSE ############## | |
| HAVE_MACFUSE=no | |
| if ! test -f "/usr/local/lib/libfuse.dylib" || ! test -f "/usr/local/include/fuse/fuse.h"; then | |
| INSTALL_MACFUSE=no | |
| if test -n "$DONTASK" && test -n "$INSTALL_STUFF"; then | |
| INSTALL_MACFUSE=yes | |
| elif test -z "$INSTALL_STUFF"; then | |
| INSTALL_MACFUSE=no | |
| else | |
| echo -e "${BOLD}The package ifuse requires macFUSE in order to work." | |
| if [ $VMAJ -ge 11 ]; then | |
| echo -e "${YELLOW}NOTE: Your Mac's startup security needs to be set to ${MAGENTA}reduced security${YELLOW} in recovery mode, and also the kernel extension cache has to be regenerated for macFUSE to work. Without perfoming these steps after the installation of macFUSE, ifuse will not be able to run.${NORMAL}" | |
| fi | |
| echo | |
| read -r -p "${BOLD}Install macFUSE? [y/N]${NORMAL} " response | |
| case "$response" in | |
| [yY][eE][sS]|[yY]) | |
| INSTALL_MACFUSE=yes | |
| ;; | |
| *) | |
| INSTALL_MACFUSE=no | |
| ;; | |
| esac | |
| fi | |
| if test "$INSTALL_MACFUSE" == "yes"; then | |
| echo -e "${BOLD}*** Installing macFUSE${NORMAL}" | |
| MFUSE_DMG=$DEPSDIR/`basename $MFUSE_URL` | |
| HASH=`$SHA1SUM "$MFUSE_DMG" 2>/dev/null |cut -d " " -f 1` | |
| if test -z "$HASH" || test "$HASH" != "$MFUSE_HASH"; then | |
| echo "-- Downloading macFUSE" | |
| $CURL -LfsS -o "$MFUSE_DMG" "$MFUSE_URL" || exit 1 | |
| fi | |
| hdiutil attach "$MFUSE_DMG" -quiet || exit 1 | |
| MOUNTP="/Volumes/macFUSE" | |
| INSTPKG="$MOUNTP/Install macFUSE.pkg" | |
| echo "-- Installing macFUSE (runs with sudo, enter your password when asked for it)" | |
| sudo /usr/sbin/installer -pkg "$INSTPKG" -target / | |
| INSTRES=$? | |
| hdiutil detach "$MOUNTP" -quiet | |
| if test $INSTRES != 0; then exit 1; fi | |
| echo -e "${BOLD}* macFUSE: ${GREEN}done${NORMAL}" | |
| HAVE_MACFUSE=yes | |
| else | |
| echo "Skipping installation of macFUSE." | |
| fi | |
| else | |
| echo -e "${BOLD}* macFUSE: ${GREEN}found${NORMAL}" | |
| HAVE_MACFUSE=yes | |
| fi | |
| CURDIR=`pwd` | |
| ############################################################################# | |
| COMPONENTS=" | |
| libplist:master \ | |
| libimobiledevice-glue:master \ | |
| libusbmuxd:master \ | |
| libimobiledevice:master \ | |
| libirecovery:master \ | |
| idevicerestore:master \ | |
| libideviceactivation:master \ | |
| ideviceinstaller:master \ | |
| " | |
| # error helper function | |
| function error_exit { | |
| echo "$1" | |
| exit 1 | |
| } | |
| if test "$HAVE_MACFUSE" == "yes"; then | |
| COMPONENTS="$COMPONENTS ifuse:master" | |
| fi | |
| if test -z "$NO_CLONE"; then | |
| echo | |
| echo -e "${CYAN}######## UPDATING SOURCES ########${NORMAL}" | |
| echo | |
| for I in $COMPONENTS; do | |
| COMP=`echo $I |cut -d ":" -f 1`; | |
| CVER=`echo $I |cut -d ":" -f 2`; | |
| if test -d "$COMP/.git" && ! test -f "$COMP/.git/shallow"; then | |
| cd $COMP | |
| if test -z "`git branch |grep '$CVER'`"; then | |
| git checkout $CVER --quiet || error_exit "Failed to check out $CVER" | |
| fi | |
| if test "$CVER" != "master"; then | |
| echo "Updating $COMP (release $CVER)"; | |
| else | |
| echo "Updating $COMP"; | |
| fi | |
| git reset --hard --quiet | |
| git pull --quiet || error_exit "Failed to pull from git $COMP" | |
| cd "$CURDIR" | |
| else | |
| rm -rf $COMP | |
| if test "$CVER" != "master"; then | |
| echo "Cloning $COMP (release $CVER)"; | |
| git clone -b $CVER https://github.com/libimobiledevice/$COMP 2>/dev/null || error_exit "Failed to clone $COMP" | |
| else | |
| echo "Cloning $COMP (master)"; | |
| git clone https://github.com/libimobiledevice/$COMP 2>/dev/null || error_exit "Failed to clone $COMP" | |
| fi | |
| fi | |
| done | |
| fi | |
| ############################################################################# | |
| echo | |
| echo -e "${CYAN}######## STARTING BUILD ########${NORMAL}" | |
| echo | |
| ############################################################################# | |
| export PKG_CONFIG_PATH="$PREFIX/lib/pkgconfig" | |
| function error_out { | |
| echo -e "${RED}ERROR: ${STEP} failed for ${COMP}, check ${YELLOW}${LOGF}${RED} for details.${NORMAL}" | |
| exit 1 | |
| } | |
| LIBCURL_VERSION=`/usr/bin/curl-config --version |cut -d " " -f 2` | |
| LIBXML2_VERSION=`/usr/bin/xml2-config --version |cut -d " " -f 2` | |
| READLINE_VERSION=`grep RT_READLINE_VERSION "${SDKDIR}/usr/include/readline/readline.h" |awk '{ print $NF }'` | |
| READLINE_CFLAGS="-I${SDKDIR}/usr/include" | |
| READLINE_LIBS="${SDKDIR}/usr/lib/libreadline.tbd" | |
| ############################################################################# | |
| COMP=libplist | |
| echo -e "${BOLD}#### Building libplist ####${NORMAL}" | |
| cd libplist | |
| echo -e "[*] Configuring..." | |
| STEP=configure | |
| LOGF=$CURDIR/${COMP}_${STEP}.log | |
| ./autogen.sh --prefix="$PREFIX" --without-cython > "$LOGF" 2>&1 || error_out | |
| echo -e "[*] Building..." | |
| STEP=build | |
| LOGF=$CURDIR/${COMP}_${STEP}.log | |
| make clean > /dev/null 2>&1 | |
| make V=1 > "$LOGF" 2>&1 || error_out | |
| echo -e "[*] Installing..." | |
| STEP=install | |
| LOGF=$CURDIR/${COMP}_${STEP}.log | |
| $INSTALL_SUDO make install > "$LOGF" 2>&1 || error_out | |
| LIBPLIST_CFLAGS="-I$PREFIX/include" | |
| LIBPLIST_LIBS="-L$PREFIX/lib -lplist-2.0" | |
| LIBPLIST_VERSION=`cat src/libplist-2.0.pc |grep Version: |cut -d " " -f 2` | |
| cd "$CURDIR" | |
| ############################################################################# | |
| COMP=libimobiledevice-glue | |
| echo -e "${BOLD}#### Building libimobiledevice-glue ####${NORMAL}" | |
| cd libimobiledevice-glue | |
| echo -e "[*] Configuring..." | |
| STEP=configure | |
| LOGF=$CURDIR/${COMP}_${STEP}.log | |
| ./autogen.sh --prefix="$PREFIX" libplist_CFLAGS="$LIBPLIST_CFLAGS" libplist_LIBS="$LIBPLIST_LIBS" libplist_VERSION="$LIBPLIST_VERSION" > "$LOGF" 2>&1 || error_out | |
| echo -e "[*] Building..." | |
| STEP=build | |
| LOGF=$CURDIR/${COMP}_${STEP}.log | |
| make clean > /dev/null 2>&1 | |
| make V=1 > "$LOGF" 2>&1 || error_out | |
| echo -e "[*] Installing..." | |
| STEP=install | |
| LOGF=$CURDIR/${COMP}_${STEP}.log | |
| $INSTALL_SUDO make install > "$LOGF" 2>&1 || error_out | |
| LIMD_GLUE_CFLAGS="-I$PREFIX/include" | |
| LIMD_GLUE_LIBS="-L$PREFIX/lib -limobiledevice-glue-1.0" | |
| LIMD_GLUE_VERSION=`cat src/libimobiledevice-glue-1.0.pc |grep Version: |cut -d " " -f 2` | |
| cd "$CURDIR" | |
| ############################################################################# | |
| COMP=libusbmuxd | |
| echo -e "${BOLD}#### Building libusbmuxd ####${NORMAL}" | |
| cd libusbmuxd | |
| echo -e "[*] Configuring..." | |
| STEP=configure | |
| LOGF=$CURDIR/${COMP}_${STEP}.log | |
| ./autogen.sh --prefix="$PREFIX" libplist_CFLAGS="$LIBPLIST_CFLAGS" libplist_LIBS="$LIBPLIST_LIBS" libplist_VERSION="$LIBPLIST_VERSION" limd_glue_CFLAGS="$LIMD_GLUE_CFLAGS" limd_glue_LIBS="$LIMD_GLUE_LIBS" limd_glue_VERSION="$LIMD_GLUE_VERSION" > "$LOGF" 2>&1 || error_out | |
| echo -e "[*] Building..." | |
| STEP=build | |
| LOGF=$CURDIR/${COMP}_${STEP}.log | |
| make clean > /dev/null 2>&1 | |
| make V=1 > "$LOGF" 2>&1 || error_out | |
| echo -e "[*] Installing..." | |
| STEP=install | |
| LOGF=$CURDIR/${COMP}_${STEP}.log | |
| $INSTALL_SUDO make install > "$LOGF" 2>&1 || error_out | |
| LIBUSBMUXD_CFLAGS="-I$PREFIX/include" | |
| LIBUSBMUXD_LIBS="-L$PREFIX/lib -lusbmuxd-2.0" | |
| LIBUSBMUXD_VERSION=`cat src/libusbmuxd-2.0.pc |grep Version: |cut -d " " -f 2` | |
| cd "$CURDIR" | |
| ############################################################################# | |
| COMP=libimobiledevice | |
| echo -e "${BOLD}#### Building libimobiledevice ####${NORMAL}" | |
| cd libimobiledevice | |
| echo -e "[*] Configuring..." | |
| STEP=configure | |
| LOGF=$CURDIR/${COMP}_${STEP}.log | |
| ./autogen.sh --prefix="$PREFIX" --enable-debug --without-cython \ | |
| openssl_CFLAGS="-I$DEPSDIR/libressl-$LIBRESSL_VER/include" openssl_LIBS="-Xlinker $LIBSSL -Xlinker $LIBCRYPTO" openssl_VERSION="$LIBRESSL_VER" \ | |
| libplist_CFLAGS="$LIBPLIST_CFLAGS" libplist_LIBS="$LIBPLIST_LIBS" libplist_VERSION="$LIBPLIST_VERSION" \ | |
| libusbmuxd_CFLAGS="$LIBUSBMUXD_CFLAGS" libusbmuxd_LIBS="$LIBUSBMUXD_LIBS" libusbmuxd_VERSION="$LIBUSBMUXD_VERSION" \ | |
| limd_glue_CFLAGS="$LIMD_GLUE_CFLAGS" limd_glue_LIBS="$LIMD_GLUE_LIBS" limd_glue_VERSION="$LIMD_GLUE_VERSION" \ | |
| readline_CFLAGS="$READLINE_CFLAGS" readline_LIBS="$READLINE_LIBS" readline_VERSION="$READLINE_VERSION" \ | |
| > "$LOGF" 2>&1 || error_out | |
| echo -e "[*] Building..." | |
| STEP=build | |
| LOGF=$CURDIR/${COMP}_${STEP}.log | |
| make clean > /dev/null 2>&1 | |
| make V=1 > "$LOGF" 2>&1 || error_out | |
| echo -e "[*] Installing..." | |
| STEP=install | |
| LOGF=$CURDIR/${COMP}_${STEP}.log | |
| $INSTALL_SUDO make install > "$LOGF" 2>&1 || error_out | |
| LIMD_CFLAGS="-I$PREFIX/include" | |
| LIMD_LIBS="-L$PREFIX/lib -limobiledevice-1.0 -lplist-2.0" | |
| LIMD_VERSION=`cat src/libimobiledevice-1.0.pc |grep Version: |cut -d " " -f 2` | |
| cd "$CURDIR" | |
| ############################################################################# | |
| COMP=libirecovery | |
| echo -e "${BOLD}#### Building libirecovery ####${NORMAL}" | |
| cd libirecovery | |
| echo -e "[*] Configuring..." | |
| STEP=configure | |
| LOGF=$CURDIR/${COMP}_${STEP}.log | |
| ./autogen.sh --prefix="$PREFIX" limd_glue_CFLAGS="$LIMD_GLUE_CFLAGS" limd_glue_LIBS="$LIMD_GLUE_LIBS" limd_glue_VERSION="$LIMD_GLUE_VERSION" > "$LOGF" 2>&1 || error_out | |
| echo -e "[*] Building..." | |
| STEP=build | |
| LOGF=$CURDIR/${COMP}_${STEP}.log | |
| make clean > /dev/null 2>&1 | |
| make V=1 > "$LOGF" 2>&1 || error_out | |
| echo -e "[*] Installing..." | |
| STEP=install | |
| LOGF=$CURDIR/${COMP}_${STEP}.log | |
| $INSTALL_SUDO make install > "$LOGF" 2>&1 || error_out | |
| IRECV_CFLAGS="-I$PREFIX/include" | |
| IRECV_LIBS="-L$PREFIX/lib -lirecovery-1.0" | |
| IRECV_VERSION=`cat src/libirecovery-1.0.pc |grep Version: |cut -d " " -f 2` | |
| cd "$CURDIR" | |
| ############################################################################# | |
| COMP=idevicerestore | |
| echo -e "${BOLD}#### Building idevicerestore ####${NORMAL}" | |
| cd idevicerestore | |
| echo -e "[*] Configuring..." | |
| STEP=configure | |
| LOGF=$CURDIR/${COMP}_${STEP}.log | |
| ./autogen.sh --prefix="$PREFIX" \ | |
| openssl_CFLAGS="-I$DEPSDIR/libressl-$LIBRESSL_VER/include" openssl_LIBS="-Xlinker $LIBSSL -Xlinker $LIBCRYPTO" openssl_VERSION="$LIBRESSL_VER" \ | |
| libcurl_CFLAGS="-I$SDKDIR/usr/include" libcurl_LIBS="-lcurl" libcurl_VERSION="$LIBCURL_VERSION" \ | |
| libzip_CFLAGS="$LIBZIP_CFLAGS" libzip_LIBS="$LIBZIP_LIBS" libzip_VERSION="$LIBZIP_VERSION" \ | |
| zlib_CFLAGS="-I$SDKDIR/usr/include" zlib_LIBS="-lz" zlib_VERSION="1.2" \ | |
| libimobiledevice_CFLAGS="$LIMD_CFLAGS" libimobiledevice_LIBS="$LIMD_LIBS" libimobiledevice_VERSION="$LIMD_VERSION" \ | |
| libusbmuxd_CFLAGS="$LIBUSBMUXD_CFLAGS" libusbmuxd_LIBS="$LIBUSBMUXD_LIBS" libusbmuxd_VERSION="$LIBUSBMUXD_VERSION" \ | |
| libirecovery_CFLAGS="$IRECV_CFLAGS" libirecovery_LIBS="$IRECV_LIBS" libirecovery_VERSION="$IRECV_VERSION" \ | |
| libplist_CFLAGS="$LIBPLIST_CFLAGS" libplist_LIBS="$LIBPLIST_LIBS" libplist_VERSION="$LIBPLIST_VERSION" \ | |
| limd_glue_CFLAGS="$LIMD_GLUE_CFLAGS" limd_glue_LIBS="$LIMD_GLUE_LIBS" limd_glue_VERSION="$LIMD_GLUE_VERSION" \ | |
| > "$LOGF" 2>&1 || error_out | |
| echo -e "[*] Building..." | |
| STEP=build | |
| LOGF=$CURDIR/${COMP}_${STEP}.log | |
| make clean > /dev/null 2>&1 | |
| make V=1 > "$LOGF" 2>&1 || error_out | |
| echo -e "[*] Installing..." | |
| STEP=install | |
| LOGF=$CURDIR/${COMP}_${STEP}.log | |
| $INSTALL_SUDO make install > "$LOGF" 2>&1 || error_out | |
| cd "$CURDIR" | |
| ############################################################################# | |
| COMP=libideviceactivation | |
| echo -e "${BOLD}#### Building libideviceactivation ####${NORMAL}" | |
| cd libideviceactivation | |
| echo -e "[*] Configuring..." | |
| STEP=configure | |
| LOGF=$CURDIR/${COMP}_${STEP}.log | |
| ./autogen.sh --prefix="$PREFIX" \ | |
| libcurl_CFLAGS="-I$SDKDIR/usr/include" libcurl_LIBS="-lcurl" libcurl_VERSION="$LIBCURL_VERSION" \ | |
| libxml2_CFLAGS="-I$SDKDIR/usr/include/libxml2" libxml2_LIBS="-lxml2" libxml2_VERSION="$LIBXML2_VERSION" \ | |
| libimobiledevice_CFLAGS="$LIMD_CFLAGS" libimobiledevice_LIBS="$LIMD_LIBS" libimobiledevice_VERSION="$LIMD_VERSION" \ | |
| libplist_CFLAGS="$LIBPLIST_CFLAGS" libplist_LIBS="$LIBPLIST_LIBS" libplist_VERSION="$LIBPLIST_VERSION" \ | |
| > "$LOGF" 2>&1 || error_out | |
| echo -e "[*] Building..." | |
| STEP=build | |
| LOGF=$CURDIR/${COMP}_${STEP}.log | |
| make clean > /dev/null 2>&1 | |
| make V=1 > "$LOGF" 2>&1 || error_out | |
| echo -e "[*] Installing..." | |
| STEP=install | |
| LOGF=$CURDIR/${COMP}_${STEP}.log | |
| $INSTALL_SUDO make install > "$LOGF" 2>&1 || error_out | |
| cd "$CURDIR" | |
| ############################################################################# | |
| COMP=ideviceinstaller | |
| echo -e "${BOLD}#### Building ideviceinstaller ####${NORMAL}" | |
| cd ideviceinstaller | |
| echo -e "[*] Configuring..." | |
| STEP=configure | |
| LOGF=$CURDIR/${COMP}_${STEP}.log | |
| ./autogen.sh --prefix="$PREFIX" \ | |
| libzip_CFLAGS="$LIBZIP_CFLAGS" libzip_LIBS="$LIBZIP_LIBS" libzip_VERSION="$LIBZIP_VERSION" \ | |
| libimobiledevice_CFLAGS="$LIMD_CFLAGS" libimobiledevice_LIBS="$LIMD_LIBS" libimobiledevice_VERSION="$LIMD_VERSION" \ | |
| libplist_CFLAGS="$LIBPLIST_CFLAGS" libplist_LIBS="$LIBPLIST_LIBS" libplist_VERSION="$LIBPLIST_VERSION" \ | |
| > "$LOGF" 2>&1 || error_out | |
| echo -e "[*] Building..." | |
| STEP=build | |
| LOGF=$CURDIR/${COMP}_${STEP}.log | |
| make clean > /dev/null 2>&1 | |
| make V=1 > "$LOGF" 2>&1 || error_out | |
| echo -e "[*] Installing..." | |
| STEP=install | |
| LOGF=$CURDIR/${COMP}_${STEP}.log | |
| $INSTALL_SUDO make install > "$LOGF" 2>&1 || error_out | |
| cd "$CURDIR" | |
| ############################################################################# | |
| if test "$HAVE_MACFUSE" == "yes"; then | |
| COMP=ifuse | |
| echo -e "${BOLD}#### Building ifuse ####${NORMAL}" | |
| cd ifuse | |
| echo -e "[*] Configuring..." | |
| STEP=configure | |
| LOGF=$CURDIR/${COMP}_${STEP}.log | |
| ./autogen.sh --prefix="$PREFIX" \ | |
| libfuse_CFLAGS="-I/usr/local/include/fuse -D_FILE_OFFSET_BITS=64" libfuse_LIBS="-L/usr/local/lib -lfuse -pthread" libfuse_VERSION="12.0.0" \ | |
| libimobiledevice_CFLAGS="$LIMD_CFLAGS" libimobiledevice_LIBS="$LIMD_LIBS" libimobiledevice_VERSION="$LIMD_VERSION" \ | |
| libplist_CFLAGS="$LIBPLIST_CFLAGS" libplist_LIBS="$LIBPLIST_LIBS" libplist_VERSION="$LIBPLIST_VERSION" \ | |
| > "$LOGF" 2>&1 || error_out | |
| echo -e "[*] Building..." | |
| STEP=build | |
| LOGF=$CURDIR/${COMP}_${STEP}.log | |
| make clean > /dev/null 2>&1 | |
| make V=1 > "$LOGF" 2>&1 || error_out | |
| echo -e "[*] Installing..." | |
| STEP=install | |
| LOGF=$CURDIR/${COMP}_${STEP}.log | |
| $INSTALL_SUDO make install > "$LOGF" 2>&1 || error_out | |
| cd "$CURDIR" | |
| fi | |
| ############################################################################# | |
| echo | |
| echo -e "${CYAN}######## BUILD COMPLETE ########${NORMAL}" | |
| echo | |
| echo -e "${BOLD}If you like this script and my work on libimobiledevice, please | |
| consider becoming a patron at ${YELLOW}https://patreon.com/nikias${NORMAL}${BOLD} - Thanks ${RED}<3${NORMAL}" | |
| echo | |
| ############################################################################# |
@nermur should be fixed now
First off, thank you for creating and maintaining this amazing script! 🥇
FYI: On macOS 13 (Ventura) and macOS 14 (Sonoma), macFUSE v4.1.2 (May 16, 2021) fails to properly install.
Upgrading to the latest release, macFUSE v4.5.0 (June 7, 2023), works correctly on macOS 13+.
diff --git a/limd-build-macos.sh b/limd-build-macos.sh
index 5ab0895..626ea93 100644
--- a/limd-build-macos.sh
+++ b/limd-build-macos.sh
@@ -3,7 +3,7 @@
# If you like this script and my work on libimobiledevice, please
# consider becoming a patron at https://patreon.com/nikias - Thanks <3
-REV=1.0.10
+REV=1.0.11
if test -x "`which tput`"; then
ncolors=`tput colors`
@@ -170,8 +170,15 @@ if [ $VMAJ -le 10 ] && [ $VMIN -lt 12 ]; then
MFUSE_HASH=2056c833aa8996d03748687bc938ba9805cc77a5
else
# macOS >= 10.12
- MFUSE_URL=https://github.com/osxfuse/osxfuse/releases/download/macfuse-4.1.2/macfuse-4.1.2.dmg
- MFUSE_HASH=a12e1f8d5e33baaa075e1a59986922eaa45162a2
+ MFUSE_URL=https://github.com/osxfuse/osxfuse/releases/download/macfuse-4.5.0/macfuse-4.5.0.dmg
+ MFUSE_HASH=8d24a497a40d3f3e70cf68f5203517e647789615
+ # Here's a helper to generate the file hash:
+ #
+ # function file_hash { SHA1SUM=$(which shasum || which sha1sum); [ -z "$SHA1SUM" ] && { echo -e "${RED}FATAL: no shasum or sha1sum found.${NORMAL}"; exit 1; }; SHA256SUM=$([[ -x $(which shasum) ]] && echo "$SHA1SUM -a 256" || which sha256sum); echo $($SHA1SUM "$file" 2>/dev/null | cut -d " " -f 1); }
+ # MFUSE_VER=4.5.0
+ # curl https://github.com/osxfuse/osxfuse/releases/download/macfuse-$MFUSE_VER/macfuse-$MFUSE_VER.dmg --remote-name --location --silent > macfuse-$MFUSE_VER.dmg
+ # file_hash macfuse-$MFUSE_VER.dmg
+ #
fi
############# CHECK REQUIRED COMMANDS #####################
Also, the sourceforge download URL for xz is dead now.
This revision and this revision fix the URL for xz and upgrade it from 5.0.5 -> 5.4.4.
diff --git a/limd-build-macos.sh b/limd-build-macos.sh
index 626ea93..feac997 100644
--- a/limd-build-macos.sh
+++ b/limd-build-macos.sh
@@ -3,7 +3,7 @@
# If you like this script and my work on libimobiledevice, please
# consider becoming a patron at https://patreon.com/nikias - Thanks <3
-REV=1.0.11
+REV=1.0.12
if test -x "`which tput`"; then
ncolors=`tput colors`
@@ -446,11 +446,11 @@ else
fi
############ lzma headers for libzip #############
-if ! test -f "$DEPSDIR/xz-5.0.5/src/liblzma/api/lzma.h"; then
+if ! test -f "$DEPSDIR/xz-5.4.4/src/liblzma/api/lzma.h"; then
echo -e "${BOLD}*** Installing lzma headers (in-tree)${NORMAL}"
- XZ_URL=https://sourceforge.net/projects/lzmautils/files/xz-5.0.5.tar.gz/download
- XZ_HASH=26fec2c1e409f736e77a85e4ab314dc74987def0
- XZ_TGZ="xz-5.0.5.tar.gz"
+ XZ_URL=https://cytranet.dl.sourceforge.net/project/lzmautils/xz-5.4.4.tar.gz
+ XZ_HASH=a12e1f8d5e33baaa075e1a59986922eaa45162a2
+ XZ_TGZ="xz-5.4.4.tar.gz"
HASH=`$SHA1SUM "$XZ_TGZ" 2>/dev/null |cut -d " " -f 1`
if test -z "$HASH" || test "$HASH" != "$XZ_HASH"; then
echo "-- Downloading xz"
@@ -458,14 +458,14 @@ if ! test -f "$DEPSDIR/xz-5.0.5/src/liblzma/api/lzma.h"; then
fi
echo "-- Extracting xz"
tar xzf "$XZ_TGZ"
- LZMA_INCLUDES="$DEPSDIR/xz-5.0.5/src/liblzma/api"
+ LZMA_INCLUDES="$DEPSDIR/xz-5.4.4/src/liblzma/api"
if ! test -f "$LZMA_INCLUDES/lzma.h"; then
echo -e "${RED}FATAL: lzma.h not found${NORMAL}"
exit 1
fi
echo -e "${BOLD}* lzma headers: ${GREEN}done${NORMAL}"
else
- LZMA_INCLUDES="$DEPSDIR/xz-5.0.5/src/liblzma/api"
+ LZMA_INCLUDES="$DEPSDIR/xz-5.4.4/src/liblzma/api"
echo -e "${BOLD}* lzma headers: ${GREEN}found${NORMAL}"
fi
@@ -905,4 +905,4 @@ echo
echo -e "${BOLD}If you like this script and my work on libimobiledevice, please
consider becoming a patron at ${YELLOW}https://patreon.com/nikias${NORMAL}${BOLD} - Thanks ${RED}<3${NORMAL}"
echo
-#############################################################################
\ No newline at end of file
+#############################################################################
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
This script seems broken for macOS Monterey (version 12.1).
* error:06FFF089:digital envelope routines:CRYPTO_internal:bad key length, and seems specific to macOS Monterey.Using the latest LibreSSL from brew (defined the
exports listed bybrew info libresslin.zshrc, so it was used correctly) didn't fix this, neither did the latest OpenSSL from brew.I've tried using different versions of LibreSSL and OpenSSL for
openssl_CFLAGSandopenssl_LIBS, with no success.