Skip to content

Instantly share code, notes, and snippets.

@nissicreative
Created October 28, 2021 16:11
Show Gist options
  • Save nissicreative/277c80a23e83b5de923aadab050c186f to your computer and use it in GitHub Desktop.
Save nissicreative/277c80a23e83b5de923aadab050c186f to your computer and use it in GitHub Desktop.
Husqvarna Error Codes
<?php
return [
'error_codes' => [
0 => 'Unexpected error',
1 => 'Outside working area',
2 => 'No loop signal',
3 => 'Wrong loop signal',
4 => 'Loop sensor problem, front',
5 => 'Loop sensor problem, rear',
6 => 'Loop sensor problem, left',
7 => 'Loop sensor problem, right',
8 => 'Wrong PIN code',
9 => 'Trapped',
10 => 'Upside down',
11 => 'Low battery',
12 => 'Empty battery',
13 => 'No drive',
14 => 'Mower lifted',
15 => 'Lifted',
16 => 'Stuck in charging station',
17 => 'Charging station blocked',
18 => 'Collision sensor problem, rear',
19 => 'Collision sensor problem, front',
20 => 'Wheel motor blocked, right',
21 => 'Wheel motor blocked, left',
22 => 'Wheel drive problem, right',
23 => 'Wheel drive problem, left',
24 => 'Cutting system blocked',
25 => 'Cutting system blocked',
26 => 'Invalid sub-device combination',
27 => 'Settings restored',
28 => 'Memory circuit problem',
29 => 'Slope too steep',
30 => 'Charging system problem',
31 => 'STOP button problem',
32 => 'Tilt sensor problem',
33 => 'Mower tilted',
34 => 'Cutting stopped - slope too steep',
35 => 'Wheel motor overloaded, right',
36 => 'Wheel motor overloaded, left',
37 => 'Charging current too high',
38 => 'Electronic problem',
39 => 'Cutting motor problem',
40 => 'Limited cutting height range',
41 => 'Unexpected cutting height adj',
42 => 'Limited cutting height range',
43 => 'Cutting height problem, drive',
44 => 'Cutting height problem, curr',
45 => 'Cutting height problem, dir',
46 => 'Cutting height blocked',
47 => 'Cutting height problem',
48 => 'No response from charger',
49 => 'Ultrasonic problem',
50 => 'Guide 1 not found',
51 => 'Guide 2 not found',
52 => 'Guide 3 not found',
53 => 'GPS navigation problem',
54 => 'Weak GPS signal',
55 => 'Difficult finding home',
56 => 'Guide calibration accomplished',
57 => 'Guide calibration failed',
58 => 'Temporary battery problem',
59 => 'Temporary battery problem',
60 => 'Temporary battery problem',
61 => 'Temporary battery problem',
62 => 'Temporary battery problem',
63 => 'Temporary battery problem',
64 => 'Temporary battery problem',
65 => 'Temporary battery problem',
66 => 'Battery problem',
67 => 'Battery problem',
68 => 'Temporary battery problem',
69 => 'Alarm! Mower switched off',
70 => 'Alarm! Mower stopped',
71 => 'Alarm! Mower lifted',
72 => 'Alarm! Mower tilted',
73 => 'Alarm! Mower in motion',
74 => 'Alarm! Outside geofence',
75 => 'Connection changed',
76 => 'Connection NOT changed',
77 => 'Com board not available',
78 => 'Slipped - Mower has Slipped. Situation not solved with moving pattern',
79 => 'Invalid battery combination - Invalid combination of different battery types.',
80 => 'Cutting system imbalance Warning',
81 => 'Safety function faulty',
82 => 'Wheel motor blocked, rear right',
83 => 'Wheel motor blocked, rear left',
84 => 'Wheel drive problem, rear right',
85 => 'Wheel drive problem, rear left',
86 => 'Wheel motor overloaded, rear right',
87 => 'Wheel motor overloaded, rear left',
88 => 'Angular sensor problem',
89 => 'Invalid system configuration',
90 => 'No power in charging station',
],
];
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment