Created
August 26, 2014 12:53
-
-
Save nl5887/6a8ef81823490f0adbdf to your computer and use it in GitHub Desktop.
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
eCos - hal_diag_init | |
Init device '/dev/BrcmTelnetIoDriver' | |
Init device '/dev/ttydiag' | |
Init tty channel: 8130a258 | |
Init device '/dev/tty0' | |
Init tty channel: 8130a278 | |
Init device '/dev/haldiag' | |
HAL/diag SERIAL init | |
Init device '/dev/ser0' | |
BCM 33XX SERIAL init - dev: 0.2 | |
Set output buffer - buf: 0x81516320 len: 4096 | |
Set input buffer - buf: 0x81517320 len: 4096 | |
BCM 33XX SERIAL config | |
Init device '/dev/ser1' | |
BCM 33XX SERIAL init - dev: 0.3 | |
Set output buffer - buf: 0x81518320 len: 4096 | |
Set input buffer - buf: 0x81519320 len: 4096 | |
BCM 33XX SERIAL config | |
InitBoard: MIPS frequency 637200000 | |
[00:00:00 01/01/1970] [tStartup] BcmBfcStdEmbeddedTarget::InitStorageDrivers: (BFC Target) Configuring/Loading Flash driver..ChipHalSelectPinMux: Setting pin mux sel 5, word 0, value 5 | |
ChipHalSelectPinMux: Setting pin mux sel 12, word 0, value 5 | |
. | |
[00:00:00 01/01/1970] [tStartup] BcmSpiFlashDevice::DetectFlash: (SPI Flash Device Factory) WARNING - Detected SPI flash with JEDEC ID =0xef4019 | |
[00:00:00 01/01/1970] [tStartup] FlashDeviceDriver::FlashDriverInit: (Flash Driver C API) WARNING - Failed to retrieve the memory window associated with flash device 1/CS1! | |
[00:00:00 01/01/1970] [tStartup] FlashDeviceDriver::FlashDriverInit: (Flash Driver C API) WARNING - Failed to detect flash device 1! Only the first device will be used. | |
Found bootloader flash map at 0x80000904. | |
[00:00:00 01/01/1970] [tStartup] BcmBfcStdEmbeddedTarget::InitStorageDrivers: (BFC Target) Loading BootloaderStore driver... | |
[00:00:00 01/01/1970] [tStartup] BcmBfcStdEmbeddedTarget::InitStorageDrivers: (BFC Target) Loading ProgramStore driver... | |
ProgramStoreDeviceDriver::ProgramStoreDriverInit: INFO - Initializing... | |
[00:00:00 01/01/1970] [tStartup] BcmBfcStdEmbeddedTarget::InitStorageDrivers: (BFC Target) Loading NonVol driver... | |
[00:00:00 01/01/1970] [tStartup] BcmBfcStdEmbeddedTarget::InitStorageDrivers: (BFC Target) Storage drivers initialized successfully. | |
[00:00:00 01/01/1970] [tStartup] BcmBfcStdEmbeddedTarget::InitDeviceAbstractions: (BFC Target) Creating singletons for ProgramStore/BootloaderStore/NonVol devices... | |
Detecting the next image number that we will store to by default... | |
Bootloader indicates we are running image 1 | |
By default, we will dload to image number 2! | |
[00:00:00 01/01/1970] [tStartup] BcmBfcStdEmbeddedTarget::InitDeviceAbstractions: (BFC Target) Device abstraction singletons created successfully. | |
FoxFactoryNonVolSettings::GetSingletonInstance: WARNING - the singleton instance is NULL, and someone is accessing it! | |
FoxFactoryNonVolSettings::GetSingletonInstance: WARNING - the singleton instance is NULL, and someone is accessing it! | |
FoxFactoryNonVolSettings::GetSingletonInstance: WARNING - the singleton instance is NULL, and someone is accessing it! | |
FoxFactoryNonVolSettings::GetSingletonInstance: WARNING - the singleton instance is NULL, and someone is accessing it! | |
mtaNvCalcChecksum: checksum= 1273101785 | |
Reading Permanent settings from non-vol... | |
Checksum for permanent settings: 0xe4d6c2e2 | |
Setting downstream calibration signature to '5.5.8mp2' | |
[00:00:00 01/01/1970] [tStartup] BcmBfcAppCompositeNonVolSettings::ReadFrom: WARNING - Read an unrecognized settings group from the buffer (magic ChipHalSelectPinMux: Setting pin mux sel 10, word 0, value 5 | |
numChipHalSelectPinMux: Setting pin mux sel 6, word 0, value 5 | |
ber 0x66776672 'fwfr'); storing in raw form for compatibility... | |
[00:00:00 01/01/1970] [tStartup] FoxVendorNonVolSettings::IsDefault: (Foxconn Vendor NonVol Settings) Permanent settings are default! | |
[00:00:00 01/01/1970] [tStartup] FoxBootImageOperationHandlerNonVolSettings::IsDefault: (Foxconn Check Software Non-Vol Settings) Permanent settings are default! | |
[00:00:00 01/01/1970] [tStartup] BcmParentalCtrlNonVolSettings::IsDefault: (Parental Control NonVol Settings) Permanent settings are default! | |
[00:00:00 01/01/1970] [tStartup] BcmWiFi80211HomeHotspotNonVolSettings::IsDefault: (WiFi 802.11 Home Hotspot NonVol Settings) Permanent settings are default! | |
[00:00:00 01/01/1970] [tStartup] BcmMscNonVolSettings::IsDefault: (Media Server Control NonVol Settings) Permanent settings are default! | |
[00:00:00 01/01/1970] [tStartup] BcmNasNonVolSettings::IsDefault: (NAS NonVol Settings) Permanent settings are default! | |
[00:00:00 01/01/1970] [tStartup] FoxRgNonVolSettings::IsDefault: (FoxRg NonVol Settings) Permanent settings are default! | |
[00:00:00 01/01/1970] [tStartup] FoxDhcpNonVolSettings::IsDefault: (Foxconn DHCP NonVol Settings) Permanent settings are default! | |
* | |
* | |
* One or more of the settings groups was missing, possibly as a result of a code upgrade. | |
* | |
* | |
Settings were read and verified. | |
Reading Dynamic settings from non-vol... | |
Checksum for dynamic settings: 0x8258b179 | |
Ziggo[5] | |
Settings were read ChipHalSelectPinMux: Setting pin mux sel 6, word 0, value 5 | |
and verified. | |
[00:00:00 01/01/1970] [tStartup] BcmBfcFpmDriver::Init: Setting FPM Buffer size to: 256 Base Address: 0x836fe900 | |
[00:00:00 01/01/1970] [tStartup] BcmBfcFpmDriver::Init: fFpmLargestBufferSize: 2048 fFpmSizeShiftBits: 0x8 | |
[00:00:00 01/01/1970] [tStartup] BcmBfcFpmDriver::Init: Pool index: 0 pool size: 2048 | |
[00:00:00 01/01/1970] [tStartup] BcmBfcFpmDriver::Init: Pool index: 1 pool size: 1024 | |
[00:00:00 01/01/1970] [tStartup] BcmBfcFpmDriver::Init: Pool index: 2 pool size: 512 | |
[00:00:00 01/01/1970] [tStartup] BcmBfcFpmDriver::Init: Pool index: 3 pool size: 256 | |
[00:00:00 01/01/1970] [tStartup] BcmBfcFpmDriver::Init: Lookup table index: 0 pool size: 3 | |
[00:00:00 01/01/1970] [tStartup] BcmBfcFpmDriver::Init: Lookup table index: 1 pool size: 2 | |
[00:00:00 01/01/1970] [tStartup] BcmBfcFpmDriver::Init: Lookup table index: 2 pool size: 1 | |
[00:00:00 01/01/1970] [tStartup] BcmBfcFpmDriver::Init: Lookup table index: 3 pool size: 1 | |
[00:00:00 01/01/1970] [tStartup] BcmBfcFpmDriver::Init: Lookup table index: 4 pool size: 0 | |
[00:00:00 01/01/1970] [tStartup] BcmBfcFpmDriver::Init: Lookup table index: 5 pool size: 0 | |
[00:00:00 01/01/1970] [tStartup] BcmBfcFpmDriver::Init: Lookup table index: 6 pool size: 0 | |
[00:00:00 01/01/1970] [tStartup] BcmBfcFpmDriver::Init: Lookup table index: 7 pool size: 0 | |
------------------------------------ | |
Free Pool Manager Configuration | |
------------------------------------ | |
BuffCreating a new host MSG PROC DQM manager. Instance: 83f6fe7c, DQM_REGS = b8601800, CTRL_REGS = b8601000 | |
Initializing main MSG_PROC DQM interrupts. | |
b8601000: 00000000 | |
b8601004: 00000000 | |
b8601008: 00000008 | |
b860100c: 00000000 | |
b8601010: 00000000 | |
b8601014: 00000000 | |
b8601018: 00000000 | |
b860101c: 00000000 | |
er size in Bytes..............Creating a new host FAP DQM manager. Instance: 83f6fdbc | |
Initializing main FAP DQM interrupts. | |
b8401000: 00000000 | |
b8401004: 00000000 | |
b8401008: 00000008 | |
b840100c: 00000000 | |
b8401010: 00000000 | |
b8401014: 00000000 | |
b8401018: 00000000 | |
b840101c: 00000000 | |
. 256 | |
Number of Tokens................... 32768 | |
Tokens used in 256 byte pool....... 32 | |
Tokens used in 512 byte pool....... 32 | |
Tokens used in 1024 byte pool...... 32 | |
Tokens used in 2048 byte pool...... 33 | |
Base Address of FPM Memory ........ 0xb2200200 | |
Base Address of FPM Mem in DDR2.... 0x836fe900 | |
Total Configured FPM Memory Size... 8388608 | |
Free Fifo Full..................... 0 | |
Free Fifo Empty.................... 1 | |
Alloc Fifo Full.................... 1 | |
Alloc Fifo Empty................... 0 | |
Number of tokens available......... 32768 | |
Number of not valid token frees.... 0 | |
Number of not valid token multi.... 0 | |
Overflow Count..................... 0 | |
Underflow Count.................... 0 | |
[00:00:00 01/01/1970] [tStartup] BcmBfcPacketAlloc::Init: Packet Alloc Header Buffer Start Addr: 0x830fe8b0 Length: 0x600000 Max Buffer Size: 0xc0 | |
PCI Core Init! instance = 0, pCoreRegs = b2800000 | |
PCI Core PowerUp! instance = 0. | |
[00:00:00 01/01/1970] [Reset/Standby Switch Thread] BcmResetStandbySwitchThread::ProcessResetSwitchEvent: (Reset/Standby Switch Thread) Reset switch released; resetting... | |
[00:00:00 01/01/1970] [Reset/Standby Switch Thread] BcmResetStandbySwitchThread::ProcessResetSwitchEvent: (Reset/Standby Switch Thread) Cant Reset pfCmDocsisCtlThread==NULL... | |
PCI ENUMERATE**************************************************************************** | |
Checking bus #1 | |
Checking device #0 | |
In pcieEnumerateDevices(0) found a card: deviceNo = 0, funcNo = 0, busNo = 1, pcieAddr = 00000000 | |
In pcieEnumerateDevices: vendor = 000014e4, device = 00004358 | |
PCIELIB: Setting PCIE clk request mode to 1 for active power savings. | |
PCIELIB: Found Capability ID = 16 | |
PCIELIB: ClkReq power mode set to 1. | |
PCIELIB: Setting PCIE ASPM L1 mode to 1 for active power savings. | |
PCIELIB: Found Capability ID = 16 | |
PCIELIB: ASPM L1 power mode set to 1. | |
END PCIE ENUMERATE************************************************************************ | |
PCI Core Init! instance = 1, pCoreRegs = b2a00000 | |
PCI Core PowerUp! instance = 1. | |
PCI ENUMERATE**************************************************************************** | |
Checking bus #1 | |
Checking device #0 | |
In pcieEnumerateDevices(1) found a card: deviceNo = 0, funcNo = 0, busNo = 1, pcieAddr = 83f818a4 | |
In pcieEnumerateDevices: vendor = 000014e4, device = 00004359 | |
PCIELIB: Setting PCIE clk request mode to 1 for active power savings. | |
PCIELIB: Found Capability ID = 16 | |
PCIELIB: ClkReq power mode set to 1. | |
PCIELIB: Setting PCIE ASPM L1 mode to 1 for active power savings. | |
PCIELIB: Found Capability ID = 16 | |
PCIELIB: ASPM L1 power mode set to 1. | |
END PCIE ENUMERATE************************************************************************ | |
>>> ITC Initialized!!! <<< | |
Booting Linux... | |
Skipped booting Linux because the module is disabled!Failed to boot Linux! | |
[00:00:00 01/01/1970] [Telnet Thread] BcmTelnetThread::ThreadMain: (Telnet Thread) Telnet server thread running... | |
Creating SNMP agent cablemodem agent | |
cablemodem agent disabling management. | |
cablemodem agent defering traps. | |
Creating BcmEmtaCommandTable | |
Creating BcmEmtaEndptCommandTable | |
If you pressed the 's' key before this point, we will skip driver initialization... | |
AVS Thread Constructor.... | |
AVS Thread InitAVS: Bootloader AVS data was retrieved successfully. | |
disabled = 0 | |
rmon ratio = 1027 | |
sigma = 153 | |
dac change = 47 | |
flash margin = 150 | |
adc_margin = 150 | |
dac_margin = -290 | |
madcperdac = 468 | |
marginOffset = 65534 | |
deviceMap = 0x81346d88 | |
K = 1.027, L = 1.079998, BG_Code = 6 | |
[01/01/1970 00:00:00] [BFCEV] EXCEPTION:02 TH:83f3dd90 PC:800ecd34 RA:800ecd18 SP:830fe540 EA:00000008 A0:815aa37c A1:00000010 A2:ffffffff A3:00000020 T(800ec874<8020e864 8020e12c<80212e2c 80212c60<80214094 80213e2c<805928c0 80592750<80729c2c 80729be4<80be2ec4 80be2e8c<80be2e84 ) | |
Creating DOCSIS Control Thread... | |
vvv Interface creation and driver startup beginning vvv | |
-> Begin Gfap HAL | |
-> End GInitalizing Gfap Hal.. | |
fap HAL | |
-> Begin DOCSIS CM WAN interface | |
Creating HAL object for the DOCSIS CableModem interface | |
numFreqPlan 4 | |
Registering DOCSIS CableModem driver | |
Initializing main DTP DQM interrupts. | |
b8201000: 0000004c | |
b8201004: 00000000 | |
b8201008: 00000008 | |
b820100c: 00000000 | |
b8201010: 00000000 | |
b8201014: 00040000 | |
b8201018: 00000000 | |
b820101c: 00000000 | |
Creating a new host FAP DQM manager. Instance: 830865a0 | |
Creating a new host FAP DQM manager. Instance: 83086490 | |
Creating a new host UTP DQM manager. Instance: 83082338 | |
Initializing main UTP DQM interrupts. | |
b8001000: 00000049 | |
b8001004: 00000000 | |
b8001008: 00000008 | |
b800100c: 00000000 | |
b8001010: 00000001 | |
b8001014: 00000000 | |
b8001018: 00000000 | |
b800101c: 00000000 | |
LNA Detected = BCM3413 | |
ChipHalSelectPinMux: Setting pin mux sel 1, word 0, value 0 | |
Initializing all 8 downstreams - this takes a while. Patience, Grasshopper... | |
1 2 3 4 5 6 7 8 | |
BcmMacInit: advMapRunAheadTimeMin = 3584 (0x00000e00) 10.24 MHz ticks, 350 usec | |
>>>> Creating DQM bundle for DQM queue #: 24 | |
Creating a new host UTP DQM manager. Instance: 8304f4c8 | |
Initializing DS Docsis 3.0 MAC | |
Initializing CalcPhyPico | |
BcmInitCalcPhyPico:Copying CalcPhy PicoCode rev 1.1.0 : 06/25/07 | |
...................................................................... | |
Verifying CalcPhy PicoCode. | |
...................................................................... | |
BcmInitCalcPhyPico:PicoCode verified. | |
Creating a new host UTP DQM manager. Instance: 8303f168 | |
Creating a new host UTP DQM manager. Instance: 8303f088 | |
[00:00:13 01/01/1970] [tStartup] BcmDocsisCmHalIf::Register: (DOCSIS CableModem HalIf) CM HAL reports h/w support for PHS, bitmask=0x3 | |
[00:00:13 01/01/1970] [tStartup] BcmDocsisCmHalIf::Register: (DOCSIS CableModem HalIf) CM HAL reports h/w support for PHS, US size=64, DS size=256 bytes. | |
-> End DOCSIS CM WAN interface | |
-> Begin Ethernet LAN interfaces | |
Creating HAL object for the Eth-Switch Lan(0) interface | |
Registering Eth-Switch Lan(0) driver | |
ChipHalSelectPinMux: Setting pin mux sel 33, word 2, value 1 | |
ChipHalSelectPinMux: Setting pin mux sel 28, word 1, value 1 | |
ChipHalSelectPinMux: Setting pin mux sel 29, word 1, value 1 | |
Probing mac 0, phy 0, id 362, timeout 159 | |
Found PHY 0, MDIO on MAC 0 | |
Probing mac 1, phy 1, id ffff, timeout 159 | |
Probing mac 1, phy 0, id 600d, timeout 157 | |
Found PHY 0, MDIO on MAC 1 | |
Creating a new host MSG PROC DQM manager. Instance: 8303e7ec, DQM_REGS = b8601800, CTRL_REGS = b8601000 | |
Creating a new host MSG PROC DQM manager. Instance: 8303e70c, DQM_REGS = b8601800, CTRL_REGS = b8601000 | |
>>>> Creating DQM bundle for DQM queue #: 23 | |
Creating a new host MSG PROC DQM manager. Instance: 8303e590, DQM_REGS = b8601800, CTRL_REGS = b8601000 | |
>>>> Creating DQM bundle for DQM queue #: 22 | |
Creating a new host MSG PROC DQM manager. Instance: 8303e468, DQM_REGS = b8601800, CTRL_REGS = b8601000 | |
>>>> Creating DQM bundle for DQM queue #: 29 | |
Creating a new host FAP DQM manager. Instance: 8303e340 | |
>>>> Creating DQM bundle for DQM queue #: 28 | |
Creating a new host FAP DQM manager. Instance: 8303e210 | |
>>>> Creating DQM bundle for DQM queue #: 3 | |
Creating a new host MPEG PROC DQM manager. Instance: 8303e0e0 | |
Initializing main MEP_PROC DQM interrupts. | |
b8a01000: 00000000 | |
b8a01004: 00000000 | |
b8a01008: 00000008 | |
b8a0100c: 00000000 | |
b8a01010: 00000000 | |
b8a01014: 00000000 | |
b8a01018: 00000000 | |
b8a0101c: 00000000 | |
>>>> Creating DQM bundle for DQM queue #: 2 | |
Creating a new host MPEG PROC DQM manager. Instance: 8303dfc0 | |
Enet Config GMAC UNIMAC Core: 0 Phy: 0 | |
Ethernet Link Down! | |
Number of Managed Switched Ports = 4 | |
Creating HAL object for the Eth-Switch Lan(1) interface | |
Registering Eth-Switch Lan(1) driver | |
Creating HAL object for the Eth-Switch Lan(2) interface | |
Registering Eth-Switch Lan(2) driver | |
Creating HAL object for the Eth-Switch Lan(3) interface | |
Registering Eth-Switch Lan(3) driver | |
-> End Ethernet LAN interfaces | |
-> Begin 802.11 WiFi LAN interface instance 0 | |
Creating HAL object for (WiFi) interface #100 | |
Registering (WiFi)(0)(0) Primary driver | |
>>>> Creating DQM bundle for DQM queue #: 17 | |
Creating a new host MSG PROC DQM manager. Instance: 83038c8c, DQM_REGS = b8601800, CTRL_REGS = b8601000 | |
>>>> Creating DQM bundle for DQM queue #: 16 | |
Creating a new host MSG PROC DQM manager. Instance: 83038b5c, DQM_REGS = b8601800, CTRL_REGS = b8601000 | |
Creating a new host MSG PROC DQM manager. Instance: 83038a8c, DQM_REGS = b8601800, CTRL_REGS = b8601000 | |
Creating a new host MSG PROC DQM manager. Instance: 830389c4, DQM_REGS = b8601800, CTRL_REGS = b8601000 | |
Creating a new host MSG PROC DQM manager. Instance: 83036e48, DQM_REGS = b8601800, CTRL_REGS = b8601000 | |
srom rev:8 | |
WIFI INSTANCE 0 NIC DETECTED | |
WiFi GPIO Configuration [WiFi Instance = 0] | |
WiFi Device ID = 4358, Wifi Board Rev = 1402, WiFi Vendor ID = 105b, WiFi WiFi Board ID = e040 | |
Push Button: Host GPIO, Pin 7, Assert Level 0 | |
WiFi Activity LED: WiFi GPIO, Pin 3, Assert Level 0 | |
WPS 1 LED: Host GPIO, Pin 9, Assert Level 1 | |
WPS 2 LED: Host GPIO, Pin 8, Assert Level 1 | |
Vendor LED: UNDEFINED | |
Error LED: UNDEFINED | |
PCie Power On: UNDEFINED | |
GPIO Extra Config: Reg Offset: 0x28, Mask Vale: 0x8000, Config Value: 0x8000 | |
Register Int Handler: busNo = 1, device = 0 | |
Creating HAL object for (WiFi) interface #101 | |
Registering (WiFi)(0)(1) MBSS driver | |
Creating HAL object for (WiFi) interface #102 | |
Registering (WiFi)(0)(2) MBSS driver | |
Creating HAL object for (WiFi) interface #103 | |
Registering (WiFi)(0)(3) MBSS driver | |
Creating HAL object for (WiFi) interface #104 | |
Registering (WiFi)(0)(4) MBSS driver | |
Creating HAL object for (WiFi) interface #105 | |
Registering (WiFi)(0)(5) MBSS driver | |
Creating HAL object for (WiFi) interface #106 | |
Registering (WiFi)(0)(6) MBSS driver | |
Creating HAL object for (WiFi) interface #107 | |
Registering (WiFi)(0)(7) MBSS driver | |
Creating HAL object for (WiFi) interface #108 | |
Registering (WiFi)(0)(8) WDS driver | |
Creating HAL object for (WiFi) interface #109 | |
Registering (WiFi)(0)(9) WDS driver | |
Creating HAL object for (WiFi) interface #110 | |
Registering (WiFi)(0)(10) WDS driver | |
Creating HAL object for (WiFi) interface #111 | |
Registering (WiFi)(0)(11) WDS driver | |
BcmWiFi80211NiHalIf::PrefetchMacAddresses | |
-> End 802.11 WiFi LAN interfaces. | |
-> Begin 802.11 WiFi LAN interface instance 1 | |
Creating HAL object for (WiFi) interface #120 | |
Registering (WiFi)(1)(0) Primary driver | |
srom rev:8 | |
WIFI INSTANCE 1 NIC DETECTED | |
WiFi GPIO Configuration [WiFi Instance = 1] | |
WiFi Device ID = 4359, Wifi Board Rev = 2201, WiFi Vendor ID = 14e4, WiFi WiFi Board ID = 545 | |
Push Button: Host GPIO, Pin 7, Assert Level 0 | |
WiFi Activity LED: WiFi GPIO, Pin 3, Assert Level 0 | |
WPS 1 LED: Host GPIO, Pin 9, Assert Level 1 | |
WPS 2 LED: Host GPIO, Pin 8, Assert Level 1 | |
Vendor LED: UNDEFINED | |
Error LED: UNDEFINED | |
PCie Power On: UNDEFINED | |
GPIO Extra Config: Reg Offset: 0x28, Mask Vale: 0x8000, Config Value: 0x8000 | |
Register Int Handler: busNo = 1, device = 0 | |
Creating HAL object for (WiFi) interface #121 | |
Registering (WiFi)(1)(1) MBSS driver | |
Creating HAL object for (WiFi) interface #122 | |
Registering (WiFi)(1)(2) MBSS driver | |
Creating HAL object for (WiFi) interface #123 | |
Registering (WiFi)(1)(3) MBSS driver | |
Creating HAL object for (WiFi) interface #124 | |
Registering (WiFi)(1)(4) MBSS driver | |
Creating HAL object for (WiFi) interface #125 | |
Registering (WiFi)(1)(5) MBSS driver | |
Creating HAL object for (WiFi) interface #126 | |
Registering (WiFi)(1)(6) MBSS driver | |
Creating HAL object for (WiFi) interface #127 | |
Registering (WiFi)(1)(7) MBSS driver | |
Creating HAL object for (WiFi) interface #128 | |
Registering (WiFi)(1)(8) WDS driver | |
Creating HAL object for (WiFi) interface #129 | |
Registering (WiFi)(1)(9) WDS driver | |
Creating HAL object for (WiFi) interface #130 | |
Registering (WiFi)(1)(10) WDS driver | |
Creating HAL object for (WiFi) interface #131 | |
Registering (WiFi)(1)(11) WDS driver | |
BcmWiFi80211NiHalIf::PrefetchMacAddresses | |
-> End 802.11 WiFi LAN interfaces. | |
nas_main: Thread creation ok | |
nas_main: Thread start ok | |
BcmWpsPBCThread: Thread creation ok | |
wpsPBCStart: Thread start ok | |
-> Begin IP wps_main: upnp I/F not up yet... | |
Stack interfaces | |
-> Starting BFC DHCP Client subsystem... | |
-> Starting BFC DHCPv6 Client subsystem... | |
Creating HAL object for IP Stack1 (MAC Addr=70:18:8b:eb:41:29) | |
Registering IP Stack1 driver | |
Tcpip NI: Init - RegisteredStackCount = 1 | |
Creating HAL object for IP Stack2 (MAC Addr=00:d0:59:de:ad:02) | |
Registering IP Stack2 driver | |
Tcpip NI: Init - RegisteredStackCount = 2 | |
Creating HAL object for IP Stack3 (MAC Addr=70:18:8b:eb:41:2a) | |
Registering IP Stack3 driver | |
Tcpip NI: Init - RegisteredStackCount = 3 | |
Creating HAL object for IP Stack4 (MAC Addr=00:d0:59:de:ad:04) | |
Registering IP Stack4 driver | |
Tcpip NI: Init - RegisteredStackCount = 4 | |
Creating HAL object for IP Stack5 (MAC Addr=70:18:8b:eb:41:2c) | |
Registering IP Stack5 driver | |
Tcpip NI: Init - RegisteredStackCount = 5 | |
Creating HAL object for IP Stack6 (MAC Addr=70:18:8b:eb:41:2b) | |
Registering IP Stack6 driver | |
Tcpip NI: Init - RegisteredStackCount = 6 | |
-> End IP Stack interfaces | |
-> Begin ITC LAN interface | |
Creating HAL object for the ITC interface | |
Registering ITC driver | |
-> End ICreating a new host PMC DQM manager. Instance: 82ec85d4, DQM_REGS = b8801800, CTRL_REGS = b8801000 | |
Initializing main PMC_PROC DQM interrupts. | |
b8801000: 00000000 | |
b8801004: 00000000 | |
b8801008: 00000028 | |
b880100c: 00000000 | |
b8801010: 00000008 | |
b8801014: 00000000 | |
b8801018: 00000000 | |
b880101c: 00000000 | |
TC LAN interface | |
^^^ Interface creation and driver startup complete ^^^ | |
Creating BcmEmtaRemoteAccessCommandTable | |
Forward Assist Manager Starting... | |
Creating the PacketCable Forwarder... | |
Adding IP Stack6 HalIf to the PacketCable Forwarder | |
Calling BcmEpsCmDocsisSystem::PostDriverInitialization()... | |
Creating the eRouter Forwarder... | |
Adding Eth-Switch Lan(0) HalIf to the eRouter Forwarder | |
Adding Eth-Switch Lan(1) HalIf to the eRouter Forwarder | |
Adding Eth-Switch Lan(2) HalIf to the eRouter Forwarder | |
Adding Eth-Switch Lan(3) HalIf to the eRouter Forwarder | |
Adding (WiFi)(0)(0) Primary HalIf to the eRouter Forwarder | |
Adding (WiFi)(0)(1) MBSS HalIf to the eRouter Forwarder | |
Adding (WiFi)(0)(2) MBSS HalIf to the eRouter Forwarder | |
Adding (WiFi)(0)(3) MBSS HalIf to the eRouter Forwarder | |
Adding (WiFi)(0)(4) MBSS HalIf to the eRouter Forwarder | |
Adding (WiFi)(0)(5) MBSS HalIf to the eRouter Forwarder | |
Adding (WiFi)(0)(6) MBSS HalIf to the eRouter Forwarder | |
Adding (WiFi)(0)(7) MBSS HalIf to the eRouter Forwarder | |
Adding (WiFi)(0)(8) WDS HalIf to the eRouter Forwarder | |
Adding (WiFi)(0)(9) WDS HalIf to the eRouter Forwarder | |
Adding (WiFi)(0)(10) WDS HalIf to the eRouter Forwarder | |
Adding (WiFi)(0)(11) WDS HalIf to the eRouter Forwarder | |
Adding (WiFi)(1)(0) Primary HalIf to the eRouter Forwarder | |
Adding (WiFi)(1)(1) MBSS HalIf to the eRouter Forwarder | |
Adding (WiFi)(1)(2) MBSS HalIf to the eRouter Forwarder | |
Adding (WiFi)(1)(3) MBSS HalIf to the eRouter Forwarder | |
Adding (WiFi)(1)(4) MBSS HalIf to the eRouter Forwarder | |
Adding (WiFi)(1)(5) MBSS HalIf to the eRouter Forwarder | |
Adding (WiFi)(1)(6) MBSS HalIf to the eRouter Forwarder | |
Adding (WiFi)(1)(7) MBSS HalIf to the eRouter Forwarder | |
Adding (WiFi)(1)(8) WDS HalIf to the eRouter Forwarder | |
Adding (WiFi)(1)(9) WDS HalIf to the eRouter Forwarder | |
Adding (WiFi)(1)(10) WDS HalIf to the eRouter Forwarder | |
Adding (WiFi)(1)(11) WDS HalIf to the eRouter Forwarder | |
Adding IP Stack3 HalIf to the eRouter Forwarder | |
Adding IP Stack4 HalIf to the eRouter Forwarder | |
Adding IP Stack5 HalIf to the eRouter Forwarder | |
Adding ITC HalIf to the eRouter Forwarder | |
Creating the DOCSIS Forwarder... | |
Adding DOCSIS CableModem HalIf as the default interface to the DOCSIS Forwarder | |
Adding IP Stack1 HalIf to the DOCSIS Forwarder | |
Adding IP Stack2 HalIf to the DOCSIS Forwarder | |
Adding WAN-Man Interface HalIf as the default interface to the eRouter Forwarder | |
Adding eRouter Embedded Interface HalIf to the DOCSIS Forwarder | |
[00:00:14 01/01/1970] [tStartup] BcmEmtaEpsCmDocsisSystem::InstallMiniUsfs: (BFC System) Installing Mini-Usfs snoop | |
Linking Docsis and PacketCable packet switches... | |
Adding WAN-Man Interface HalIf as the default interface to the PacketCable Forwarder | |
Adding PacketCable Embedded Interface HalIf to the DOCSIS Forwarder | |
[00:00:14 01/01/1970] [tStartup] BcmSled::GlobalEnable: (Singleton Instance) WARNING - eDOCSIS SLED is being disabled. | |
Current IP address is default 0.0.0.0. | |
Configuring IP stack 2: IP Address = 192.168.100.1 | |
[00:00:15 01/01/1970] [tStartup] BcmEcosIpHalIf::AddIpv6LinkLocalAddress: (IP Stack2 HalIf) Configuring link-local IPv6 address fe80::2d0:59ff:fede:ad02/64 | |
Creating Propane Control Thread... | |
Propane version: 2.0.1 (28 Oct 2002) | |
Instantiating CmSnmpAgent object. | |
Starting SNMP subsystem | |
Registering STP Filter Snoop with all interfaces. | |
Registering DOCSIS MIB Filter Snoop with CPE and WAN interfaces. | |
Creating SNMP agent CPE diag agent | |
CPE diag agent disabling management. | |
CPE diag agent defering traps. | |
BcmSnmpThread starting thread operation. | |
Initializing Net-SNMP transport for IPv4 | |
Initializing Net-SNMP transport for IPv6 | |
IPv6 - register netsnmp_brcmV6_ctor to get our brcm V6 UDP domain | |
IPv6 init_bcmV2SessionAndTransport: Open a session and hook our callbacks | |
[00:00:16 01/01/1970] [tStartup] BcmDocsisCmHalIf::RegisterSnmpObjects: (DOCSIS CableModem HalIf) Interface 10 additional registration w/ SNMP agent OK. | |
[00:00:16 01/01/1970] [tStartup] BcmErouterPacketSwitchBridgingHalIf::RegisterSnmpObjects: (eRouter Embedded Interface HalIf) Interface 39 additional registration w/ SNMP agent OK. | |
[00:00:16 01/01/1970] [tStartup] BcmPacketSwitchBridgingHalIf::RegisterSnmpObjects: (PacketCable Embedded Interface HalIf) Interface 39 additional registration w/ SNMP agent OK. | |
Setting US cal singleton instance to 0 | |
CmSnmpAgent installing views... | |
CmSnmpAgent installing DOCSIS Default View entries... | |
Vendor CM Agent w/ BRCM Factory Support setting V1/V2 view to unrestricted | |
Vendor CM Agent w/ BRCM Factory Support installing engine ID... | |
Vendor CM Agent w/ BRCM Factory Support installing context... | |
SNMP startup complete. | |
ChipHalSelectPinMux: Setting pin mux sel 8, word 0, value 5 | |
ChipHalSelectPinMux: Setting pin mux sel 8, word 0, value 5 | |
ChipHalSelectPinMux: Setting pin mux sel 7, word 0, value 5 | |
BcmCommandTable::AddInstance: ERROR - Attempted to add duplicate instance 'ND Thread for IP Stack1' (0x82d53a8c) to command table 'Message Log Settings Commands'. | |
Current IP address is default 0.0.0.0. | |
Configuring IP stack 5: IP Address = 192.168.178.1 | |
PB BUTTON PUSH: [0 seconds | |
00:00:17 01/01/1970] [FTP Lite Client Thread] FtpLiteClientThread::ThreadMain: (FTP Lite Client Thread) Broadcom FTP Lite Client thread starting... | |
Vendor CM Event Log initializing with stored events. | |
Event log initialization complete. | |
[00:00:18 01/01/1970] [tStartup] BcmeRouterDhcpv6IpHelper::CreateLease: Creating DHCP lease for client id = htype=1, value=70:18:8b:eb:41:2a | |
Creating SNMP agent CH agent | |
CH agent disabling management. | |
CH agent defering traps. | |
Instantiating eRouter SnmpAgent object. | |
WARNING - Couldn't find table 1.3.6.1.4.1.4684.2.20.12.1.5 on Vendor CH Agent w/ BRCM Factory Support | |
===> WARNING: Failed to register TabularMibBridge 1.3.6.1.4.1.4684.2.20.12.1.5 to agent Vendor CH Agent w/ BRCM Factory Support | |
===> Object not found on agent. | |
WARNING - Couldn't find table 1.3.6.1.4.1.4684.2.20.12.1.5 on Vendor CH Agent w/ BRCM Factory Support | |
===> WARNING: Failed to register TabularMibBridge 1.3.6.1.4.1.4684.2.20.12.1.5 to agent Vendor CH Agent w/ BRCM Factory Support | |
===> Object not found on agent. | |
CHSnmpAgent installing views... | |
Vendor CH Agent w/ BRCM Factory Support setting V1/V2 view to unrestricted | |
UPnP::upnp_device_attach:bcm4: attach WFADevice.xml | |
Vendor CH Agent w/ BRCM Factory Support installing engine ID... | |
Vendor CH Agent w/ BRCM Factory Support installing context... | |
Vendor CM Agent w/ BRCM Factory Support setting master agent to Vendor CH Agent w/ BRCM Factory Support | |
Creating SNMP agent CH diag agent | |
CH diag agent setting V1/V2 view to unrestricted | |
CH diag agent enabling management. | |
CH diag agent sending deferred traps... | |
Done w/ deferred traps. | |
CH diag agent installing engine ID... | |
CH diag agent installing context... | |
NAT Session Manager: PSM start is @ 14210000 (3383) | |
Creating a new host MPEG PROC DQM manager. Instance: 82aebe18 | |
InitializeNapDqmMessageChannel SUCCESS! | |
hostNapHalIf: InitializeNapDqmMessageChannel SUCCESS! | |
NatTrafficCounterPsmOffset SUCCESS! | |
NatpFfeOffsets SUCCESS! | |
[00:00:22 01/01/1970] [NAT Session Manager Thread] BcmNatSessionManagerThread::ThreadMain: (NAT Session Manager Thread) NAT Session Manager waiting for events... | |
[00:00:22 01/01/1970] [tStartup] CableHomeDhcpServerIpServiceAppIf::ConfigureDhcpStaticLeasedEntry: (CableHomeDhcpServerIpServiceAppIf) Configure Dhcp Static Leased Entry. | |
Registering Qos2 Policy Table | |
Registering Qos2 Traffic Class Table | |
Registering Lan Addr Entry Table | |
[00:00:22 01/01/1970] [tStartup] BcmRipClientThread::AuthEnable: (Rip Client Thread) Broadcom V2 RIP Client MD5 Authentication status = 1 | |
[00:00:22 01/01/1970] [tStartup] BcmDocsisCmHalIf::AddSnoop: (DOCSIS CableModem HalIf) WARNING - RoutedSubnetCmSnoop: unsafe modification of the Snoop lists after the interface is up! | |
[00:00:22 01/01/1970] [tStartup] BcmDocsisCmHalIf::SortSnoops: (DOCSIS CableModem HalIf) WARNING - Unsafe modification of the Snoop lists after the interface is up! | |
[00:00:22 01/01/1970] [IkeThreCreating a new host MPEG PROC DQM manager. Instance: 82ac3844 | |
Creating a new host MPEG PROC DQM manager. Instance: 82ac377c | |
Creating a new host MPEG PROC DQM manager. Instance: 82ac36ac | |
ad] IkeThread::Initialize: (IkeThread) INFO - Initializing thread objects... | |
[00:00:22 01/01/1970] [tStartup] IkeThread::BcmVpnNonVolSettings: (IkeThread) INFO - Setting up the singleton pointer. | |
Creating BcmVpnCommandTable | |
Dynamic DNS client DISABLED. | |
BcmCommandTable::AddInstance: ERROR - Attempted to add duplicate instance 'NDT for IP Stack3' (0x82aacbf0) to command table 'Message Log Settings Commands'. | |
[00:00:22 01/01/1970] [tStartup] BcmEcosIpHalIf::AddIpv6LinkLocalAddress: (IP Stack5 HalIf) Configuring link-local IPv6 address fe80::7218:8bff:feeb:412c/64 | |
[00:00:22 01/01/1970] [IkeThread] IkeThread::ThreadMain: (IkeThread) Entering... | |
[00:00:22 01/01/1970] [IkeThread] IkeThread::ThreadMain: (IkeThread) Starting IPSEC/IKE initialization | |
-- Detected (Eth-Switch Lan(0)) Mask: 0x1 as (primary) LAN interface | |
-- Detected (Eth-Switch Lan(1)) Mask: 0x2 as (primary) LAN interface | |
-- Detected (Eth-Switch Lan(2)) Mask: 0x4 as (primary) LAN interface | |
-- Detected (Eth-Switch Lan(3)) Mask: 0x8 as (primary) LAN interface | |
-- Detected ((WiFi)(0)(0) Primary) Mask: 0x10 as (primary) LAN interface | |
-- Forcing ((WiFi)(0)(1) MBSS) Mask: 0x20 (non-primary) LAN interface | |
-- Forcing ((WiFi)(0)(2) MBSS) Mask: 0x40 (non-primary) LAN interface | |
-- Forcing ((WiFi)(0)(3) MBSS) Mask: 0x80 (non-primary) LAN interface | |
-- Forcing ((WiFi)(0)(4) MBSS) Mask: 0x100 (non-primary) LAN interface | |
-- Forcing ((WiFi)(0)(5) MBSS) Mask: 0x200 (non-primary) LAN interface | |
-- Forcing ((WiFi)(0)(6) MBSS) Mask: 0x400 (non-primary) LAN interface | |
-- Forcing ((WiFi)(0)(7) MBSS) Mask: 0x800 (non-primary) LAN interface | |
-- Detected ((WiFi)(1)(0) Primary) Mask: 0x10000 as (primary) LAN interface | |
-- Forcing ((WiFi)(1)(1) MBSS) Mask: 0x20000 (non-primary) LAN interface | |
-- Forcing ((WiFi)(1)(2) MBSS) Mask: 0x40000 (non-primary) LAN interface | |
-- Forcing ((WiFi)(1)(3) MBSS) Mask: 0x80000 (non-primary) LAN interface | |
-- Forcing ((WiFi)(1)(4) MBSS) Mask: 0x100000 (non-primary) LAN interface | |
-- Forcing ((WiFi)(1)(5) MBSS) Mask: 0x200000 (non-primary) LAN interface | |
-- Forcing ((WiFi)(1)(6) MBSS) Mask: 0x400000 (non-primary) LAN interface | |
-- Forcing ((WiFi)(1)(7) MBSS) Mask: 0x800000 (non-primary) LAN interface | |
-- Detected (ITC) Mask: 0x80000000 as (primary) LAN interface | |
BcmCommandTable::AddInstance: ERROR - Attempted to add duplicate instance 'NDT (Primary) (0x8001001f)' (0x82aa353c) to command table 'Message Log Settings Commands'. | |
BcmCommandTable::AddInstance: ERROR - Attempted to add duplicate instance 'NDT (Eth-Switch Lan(0)) (0x1)' (0x82aa0a48) to command table 'Message Log Settings Commands'. | |
BcmCommandTable::AddInstance: ERROR - Attempted to add duplicate instance 'NDT (Eth-Switch Lan(1)) (0x2)' (0x82a9dab0) to command table 'Message Log Settings Commands'. | |
BcmCommandTable::AddInstance: ERROR - Attempted to add duplicate instance 'NDT (Eth-Switch Lan(2)) (0x4)' (0x82a9ab98) to command table 'Message Log Settings Commands'. | |
BcmCommandTable::AddInstance: ERROR - Attempted to add duplicate instance 'NDT (Eth-Switch Lan(3)) (0x8)' (0x82a97c80) to command table 'Message Log Settings Commands'. | |
BcmCommandTable::AddInstance: ERROR - Attempted to add duplicate instance 'NDT ((WiFi)(0)(0) Primary) (0x10)' (0x82a94d68) to command table 'Message Log Settings Commands'. | |
BcmCommandTable::AddInstance: ERROR - Attempted to add duplicate instance 'NDT ((WiFi)(0)(1) MBSS) (0x20)' (0x82a91dcc) to command table 'Message Log Settings Commands'. | |
BcmCommandTable::AddInstance: ERROR - Attempted to add duplicate instance 'NDT ((WiFi)(0)(2) MBSS) (0x40)' (0x82a8eefc) to command table 'Message Log Settings Commands'. | |
BcmCommandTable::AddInstance: ERROR - Attempted to add duplicate instance 'NDT ((WiFi)(0)(3) MBSS) (0x80)' (0x82a8bfc8) to command table 'Message Log Settings Commands'. | |
BcmCommandTable::AddInstance: ERROR - Attempted to add duplicate instance 'NDT ((WiFi)(0)(4) MBSS) (0x100)' (0x82a84cf8) to command table 'Message Log Settings Commands'. | |
BcmCommandTable::AddInstance: ERROR - Attempted to add duplicate instance 'NDT ((WiFi)(0)(5) MBSS) (0x200)' (0x82a81d4c) to command table 'Message Log Settings Commands'. | |
BcmCommandTable::AddInstance: ERROR - Attempted to add duplicate instance 'NDT ((WiFi)(0)(6) MBSS) (0x400)' (0x82a7ee10) to command table 'Message Log Settings Commands'. | |
BcmCommandTable::AddInstance: ERROR - Attempted to add duplicate instance 'NDT ((WiFi)(0)(7) MBSS) (0x800)' (0x82a7bf3c) to command table 'Message Log Settings Commands'. | |
BcmCommandTable::AddInstance: ERROR - Attempted to add duplicate instance 'NDT ((WiFi)(1)(0) Primary) (0x10000)' (0x82a78f90) to command table 'Message Log Settings Commands'. | |
BcmCommandTable::AddInstance: ERROR - Attempted to add duplicate instance 'NDT ((WiFi)(1)(1) MBSS) (0x20000)' (0x82a76074) to command table 'Message Log Settings Commands'. | |
BcmCommandTable::AddInstance: ERROR - Attempted to add duplicate instance 'NDT ((WiFi)(1)(2) MBSS) (0x40000)' (0x82a730dc) to command table 'Message Log Settings Commands'. | |
BcmCommandTable::AddInstance: ERROR - Attempted to add duplicate instance 'NDT ((WiFi)(1)(3) MBSS) (0x80000)' (0x82a701a0) to command table 'Message Log Settings Commands'. | |
BcmCommandTable::AddInstance: ERROR - Attempted to add duplicate instance 'NDT ((WiFi)(1)(4) MBSS) (0x100000)' (0x82a6d258) to command table 'Message Log Settings Commands'. | |
BcmCommandTable::AddInstance: ERROR - Attempted to add duplicate instance 'NDT ((WiFi)(1)(5) MBSS) (0x200000)' (0x82a6a344) to command table 'Message Log Settings Commands'. | |
BcmCommandTable::AddInstance: ERROR - Attempted to add duplicate instance 'NDT ((WiFi)(1)(6) MBSS) (0x400000)' (0x82a673dc) to command table 'Message Log Settings Commands'. | |
BcmCommandTable::AddInstance: ERROR - Attempted to add duplicate instance 'NDT ((WiFi)(1)(7) MBSS) (0x800000)' (0x82a64474) to command table 'Message Log Settings Commands'. | |
BcmCommandTable::AddInstance: ERROR - Attempted to add duplicate instance 'NDT (ITC) (0x80000000)' (0x82a6150c) to command table 'Message Log Settings Commands'. | |
Setting DHCPv6 server provisioning to (1) | |
WARNING - Couldn't find group 1.3.6.1.4.1.4684.38.2.2.2.1.1.3 on Vendor CH Agent w/ BRCM Factory Support | |
WARNING - Couldn't find group 1.3.6.1.4.1.4684.38.2.2.2.1.1.3 on Vendor CH Agent w/ BRCM Factory Support | |
WARNING - Couldn't find group 1.3.6.1.4.1.4684.38.2.2.2.1.1.3 on CH diag agent | |
[00:00:23 01/01/1970] [tStartup] BcmRgHttpServerThread::Enable: (HttpServerThread) Broadcom HttpServerThread running status = 1 | |
********************************************************** | |
Running as a Residental Gateway Enabled device! | |
********************************************************** | |
*********************************************** | |
(DHCP) WAN IP Connection Configuration | |
*********************************************** | |
*********************************************** | |
Primary LAN (NAT) | |
*********************************************** | |
[00:00:23 01/01/1970] [tStartup] CableHomeDhcpServerIpServiceAppIf::EnableDhcpServerProvisioning: (CableHomeDhcpServerIpServiceAppIf) Setting DHCP server provisioning to (1) | |
Creating SNMP agent EMTA agent | |
EMTA agent entering RFC-2576 Coexistence security mode. | |
EMTA agent setting V1/V2 view to coexistenceView | |
EMTA agent entering Basic/Hybrid flow provisioning mode. | |
initBlindData: nvramSize= 712 | |
mtaNvCalcChecksum: checksum= 1273101785Completed Adding New Command for Emta Remote Console: log | |
Completed Adding New Command for Emta Remote Console: diag | |
Completed Adding New Command for Emta Remote Console: reset | |
Completed Adding New Command for Emta Remote Console: set | |
Completed Adding New Command for Emta Remote Console: show | |
EMTA battery callback = 0x80b1d374 | |
00:00:23.700 01/01/1970 [aoRT] (BOS) | |
bosAppRootTask() - Is it morning already? Spawning app task (epoch #0)... | |
00:00:23.740 01/01/1970 [aoRT] (BOS) TaskCreate - spawn new task aoAP | |
[00:00:23 01/01/1970] [IpsecTimer] IpsecTimer::ThreadMain: Entering... | |
00:00:23.750 01/01/1970 (LOG) WARN: Module CALC. Is already registered! | |
00:00:23.760 01/01/1970 (LOG) WARN: Module NET. Is already registered! | |
00:00:23.770 01/01/1970 (LOG) WARN: Module UTIL. Is already registered! | |
00:00:23.700 01/01/1970 [RESM] (BOS) Created message queue "RESQ", depth 25, id 1 | |
00:00:23.810 01/01/1970 [aoAP] (BOS) TaskCreate - spawn new task SLIC | |
00:00:23.810 01/01/1970 [aoAP] (BOS) TaskCreate - spawn new task CMT_EXCEPTION_IST | |
00:00:23.820 01/01/1970 [aoAP] (BOS) TaskCreate - spawn new task Load-balance | |
===> WARNING: Can't add esafeMibObjectsGroup @ 0x829c13a4 to iso, group already exists. | |
[00:00:23 01/01/1970] [tStartup] BcmPacketSwitchBridgingHalIf::RegisterSnmpObjects: (WAN-Man Interface HalIf) Interface 40 additional registration w/ SNMP agent OK. | |
00:00:23.940 01/01/1970 [aoAP] (BOS) TaskCreate - spawn new task HTSK | |
00:00:23.950 01/01/1970 (CALC) CC: Initialization starting... | |
emta factory agent installing engine ID... | |
emta factory agent installing context... | |
emta factory agentResetting to default state. | |
emta factory agent destroying users... | |
emta factory agent destroying notifies... | |
emta factory agent destroying views... | |
emta factory agent entering RFC-2576 Coexistence security mode. | |
emta factory agent setting V1/V2 view to coexistenceView | |
emta factory agent entering Basic/Hybrid flow provisioning mode. | |
emta factory agent setting V1/V2 view to | |
BcmCommandTable::AddInstance: ERROR - Attempted to add duplicate instance 'ND Thread for IP Stack6' (0x812d2b84) to command table 'Message Log Settings Commands'. | |
[00:00:25 01/01/1970] [tStartup] BcmSled::Register: (Singleton Instance) WARNING - PacketCable Embedded Interface is already registered! | |
AVS Thread Start: beginning thread | |
AVS Thread InitAVS: intermediate AVS code apparently not supported | |
fAVSDisabled = false | |
AVS Thread InitAVS: PMM clock is 318.6 MHz... | |
AVS Thread Start:Arming poll timer.... | |
NvPollMilliseconds = 1000 | |
AVS Thread Start: Done. | |
Checking board manufacturing state... | |
WARNING: Board NV manufacturing incomplete. | |
Check the following settings: | |
IP stack 2 MAC, IP stack 4 MAC | |
Existing factory key(s), not installing temporary key. | |
Vendor CPE Agent w/ BRCM Factory Support setting V1/V2 view to unrestricted | |
Vendor CPE Agent w/ BRCM Factory Support enabling management. | |
Vendor CPE Agent w/ BRCM Factory Support sending deferred traps... | |
Done w/ deferred traps. | |
Vendor CPE Agent w/ BRCM Factory Support installing engine ID... | |
Vendor CPE Agent w/ BRCM Factory Support installing context... | |
Vendor CPE Agent w/ BRCM Factory Support setting V1/V2 view to docsisCpeView | |
acsd_main: Thread creation ok | |
acsd_main: Thread start ok | |
[00:00:26 01/01/1970] [tStartup] CableHomeDhcpServerIpServiceAppIf::ArpServerLeasePool: (CableHomeDhcpServerIpServiceAppIf) Arping Dhcp Server Lease pool to populate Usfs table: (192.168.178.10) --> (192.168.178.73) | |
+-----------------------------------------------------------------------+ | |
| Portions of this product contain open source software and are subject | | |
| to terms of the applicable license as specified in the release notes. | | |
+-----------------------------------------------------------------------+ | |
* | |
* * | |
* * | |
* * | |
* * | |
* * | |
* * | |
* * | |
* * | |
* * | |
* * | |
* * | |
* * | |
* * | |
* * | |
* * | |
* * * * | |
* * * * * * *** | |
* * * * * * * * ******************* | |
* * * * * * | |
* * | |
Broadcom Corporation Reference Design | |
+----------------------------------------------------------------------------+ | |
| _/_/ _/_/_/_/ _/_/ | | |
| _/ _/ _/ _/ _/ Broadband | | |
| _/ _/ _/ _/ | | |
| _/_/ _/_/_/ _/ Foundation | | |
| _/ _/ _/ _/ | | |
| _/ _/ _/ _/ _/ Classes | | |
| _/_/_/ _/ _/_/ | | |
| | | |
| Copyright (c) 1999 - 2013 Broadcom Corporation | | |
| | | |
| Revision: 5.5.8mp2 | | |
| | | |
| Features: BCM93383WVG Console TelnetConsole Nonvol Fat HeapManager SNMP | | |
| Features: Networking IPv6 (script bcm93383wvg_EVW321B) Switch53124 | | |
+----------------------------------------------------------------------------+ | |
| Standard Embedded Target Support for BFC | | |
| | | |
| Copyright (c) 2003-2013 Broadcom Corporation | | |
| | | |
| Revision: 3.0.1 | | |
| | | |
| Features: PID=0xa636 BID=0x0 Bootloader-Rev=14.2.13a | | |
| Features: Bootloader-Compression-Support=0x11 MANUFACT_BITS=0xb | | |
| Features: Dual-band Wifi Bcm80211=Build Jan 18 2013 15:42:38 | | |
| Features: App Ver 6.30.102.12.558.44 | | |
| Features: Wl Ver 6.30.102.12.558.44 | | |
| Features: IopLib-Rev=558.42.0 | | |
+----------------------------------------------------------------------------+ | |
| eCos BFC Application Layer | | |
| | | |
| Copyright (c) 1999 - 2013 Broadcom Corporation | | |
| | | |
| Revision: 3.0.2 | | |
| | | |
| Features: eCos Console Cmds, (no Idle Loop Profiler) | | |
+----------------------------------------------------------------------------+ | |
| _/_/ _/ _/ | | |
| _/ _/ _/_/ _/_/ DOCSIS Cable Modem | | |
| _/ _/ _/ _/ | | |
| _/ _/ _/ | | |
| _/ _/ _/ | | |
| _/ _/ _/ _/ | | |
| _/_/ _/ _/ | | |
| | | |
| Copyright (c) 1999 - 2013 Broadcom Corporation | | |
| | | |
| Revision: 5.5.8mp2 | | |
| | | |
| Features: AckCel(tm) DOCSIS 1.0/1.1/2.0/3.0 Propane(tm) CM SNMP w/Factory | | |
| Features: MIB Support CM Vendor Extension eDOCSIS SLED D3.0 Drop | | |
| Features: Classifiers FAP EURO Production Custom UI | | |
+----------------------------------------------------------------------------+ | |
| Broadcom Data-Only CM Vendor Extension | | |
| | | |
| Copyright (c) 1999 - 2013 Broadcom Corporation | | |
| | | |
| Revision: 3.0.2 | | |
| | | |
| Features: DHCP Server HTTP Server OSS2-N-03025 Visualization LED | | |
| Features: Controller Reset/Standby Switch Support | | |
+----------------------------------------------------------------------------+ | |
| _/ _/ _/ _/_/ | | |
| _/ _/ _/ _/ _/ Linux | | |
| _/ _/ _/ _/ | | |
| _/ _/ _/ Based | | |
| _/ _/ _/ _/ _/_/_/ | | |
| _/ _/ _/ _/ _/ Gateway | | |
| _/_/_/_/ _/ _/ _/_/_/ | | |
| | | |
| Copyright (c) 1999 - 2013 Broadcom Corporation | | |
| | | |
| Revision: N/A | | |
| | | |
| Features: | | |
+----------------------------------------------------------------------------+ | |
| _/_/_/ | | |
| _/_/ _/ _/ eRouter Dual Stack | | |
| _/ _/ _/ _/ | | |
| _/_/_/_/ _/_/_/ | | |
| _/ _/ _/ | | |
| _/ _/ _/ | | |
| _/_/_/ _/ _/ | | |
| | | |
| Copyright (c) 1999 - 2013 Broadcom Corporation | | |
| | | |
| Revision: 5.5.8mp2 | | |
| | | |
| Features: eRouter SNMP Customer Extension NATP L2oGRE HomeHotspot | | |
+----------------------------------------------------------------------------+ | |
| Broadcom eRouter Customer Extension | | |
| | | |
| Copyright (c) 1999 - 2013 Broadcom Corporation | | |
| | | |
| Revision: 3.0.2 | | |
| | | |
| Features: () | | |
+----------------------------------------------------------------------------+ | |
| _/ _/ _/_/_/ _/ | | |
| _/_/ _/_/ _/ _/_/ Embedded MTA | | |
| _/ _/ _/ _/ _/ _/ | | |
| _/ _/ _/ _/ _/ | | |
| _/ _/ _/ _/_/__/ CableLabs Certified | | |
| _/ _/ _/ _/ _/ PacketCable Certified | | |
| _/ _/ _/ _/ _/ | | |
| | | |
| Copyright (c) 1999 - 2013 Broadcom Corporation | | |
| | | |
| Revision: 9.12.6002 | | |
| | | |
| Features: bcm93383wvg_EVW321B (EuroPacketCable) eCos | | |
| Features: IPSEC NCS ZIGGO PacketCable-v1.5 | | |
| Features: dspApp3383_bv16_ilbc_faxr (LDX app) | | |
| Features: Logging: All | | |
| Features: (MTA LIB DATE: Jan 28 2013 17:33:30) | | |
+----------------------------------------------------------------------------+ | |
| Build Date: Jan 28 2013 | | |
| Build Time: 18:04:19 (+0800) | | |
| Built By: sam | | |
| Image Name: ecram_sto.bin | | |
| Image Path: /home/sam/Cable/EVW321B/ProdD30PC15_BFC5.5.8_CxC3.9.21.14_RG_mp2_FXC/rbb_cm_src/CmDocsisSystem/ecos/bcm93383wvg_EVW321B_eu_ipv6 | |
+----------------------------------------------------------------------------+ | |
Running the system... | |
Beginning Cable Modem operation... | |
BcmDocsisCmDownstreamCalibrationNonVolSettings::GetTunerInstance: WARNING - the instance 1 is NULL, and someone is accessing it! | |
Beginning Parental Control operation... | |
Beginning eRouter operation... | |
Beginning MTA operation... | |
BcmEmtaDhcpStateMachineGlue: Setting up the singleton pointer. | |
[[ | |
00:00:27 01/01/1970] [Scan Downstream Thread] ZiggoCmDownstreamScanThread::ThreadMain: (Scan Downstream Thread) Scanning for a Downstream Channel... | |
[00:00:27 01/01/1970] [Scan Downstream Thread] ZiggoCmDownstreamScanThread::ScanStarting: (Scan Downstream Thread) Scanning even 1MHz boundaries on first pass starting at 112000000 MHz | |
Resetting EnergyDetected to false. | |
Forgetting energy frequency. | |
Scanning Vendor Frequency Table:LiveO at 241000000 Hz... | |
Type 'help' or '?' for a list of commands... | |
CM> 00: 0:27 1/ 1/1970] [CableHomePingTool Thread] CableHomePingTool::ArpIpAddressRange: (CableHomePingTool Thread) ARP'ing of Ip Address Range (192.168.178.10) --> (192.168.178.73) | |
Scanning Vendor Frequency Table:LiveO at 249000000 Hz... | |
Scanning Vendor Frequency Table:LiveO at 257000000 Hz... | |
Scanning Vendor Frequency Table:LiveO at 265000000 Hz... | |
Scanning Vendor Frequency Table:LiveO at 273000000 Hz... | |
Scanning Vendor Frequency Table:LiveO at 281000000 Hz... | |
Scanning Vendor Frequency Table:LiveO at 289000000 Hz... | |
Scanning Vendor Frequency Table:LiveO at 297000000 Hz... | |
Scanning Vendor Frequency Table:LiveO at 305000000 Hz... | |
Scanning Vendor Frequency Table:LiveO at 313000000 Hz... | |
Scanning Vendor Frequency Table:LiveO at 321000000 Hz... | |
Scanning Vendor Frequency Table:LiveO at 329000000 Hz... | |
Scanning Vendor Frequency Table:LiveO at 337000000 Hz... | |
Scanning Vendor Frequency Table:LiveO at 345000000 Hz... | |
Scanning Vendor Frequency Table:LiveO at 353000000 Hz... | |
Scanning Vendor Frequency Table:LiveO at 361000000 Hz... | |
Scanning Vendor Frequency Table:NorthSouthC at 140000000 Hz... | |
Scanning Vendor Frequency Table:NorthSouthC at 148000000 Hz... | |
Scanning All Frequency 299000000 Hz... | |
Scanning All Frequency 307000000 Hz... | |
Scanning All Frequency 315000000 Hz... |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment