Created
May 13, 2022 19:27
-
-
Save nmenon/2139c57212605bb38a4624ad0523416f to your computer and use it in GitHub Desktop.
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| U-Boot SPL 2021.01-g70c33dd821 (May 10 2022 - 01:55:21 +0000) | |
| SYSFW ABI: 3.1 (firmware rev 0x0008 '8.3.2--v08.03.02 (Jolly Jellyfi') | |
| Trying to boot from MMC2 | |
| Loading Environment from MMC... *** Warning - No MMC card found, using default environment | |
| Starting ATF on ARM64 core... | |
| NOTICE: BL31: v2.6(release):v2.6-873-g6541aa2-dirty | |
| NOTICE: BL31: Built : 22:55:52, May 7 2022 | |
| U-Boot SPL 2021.01-g70c33dd821 (May 10 2022 - 01:55:11 +0000) | |
| SYSFW ABI: 3.1 (firmware rev 0x0008 '8.3.2--v08.03.02 (Jolly Jellyfi') | |
| Trying to boot from MMC2 | |
| U-Boot 2021.01-g70c33dd821 (May 10 2022 - 01:55:11 +0000) | |
| SoC: AM62X SR1.0 | |
| Model: Texas Instruments AM625 SK | |
| EEPROM not available at 0x50, trying to read at 0x51 | |
| Board: AM62-SKEVM rev E2 | |
| DRAM: 2 GiB | |
| MMC: mmc@fa10000: 0, mmc@fa00000: 1, mmc@fa20000: 2 | |
| Loading Environment from MMC... OK | |
| In: serial@2800000 | |
| Out: serial@2800000 | |
| Err: serial@2800000 | |
| Net: eth0: ethernet@8000000port@1 | |
| Hit any key to stop autoboot: 2 1 0 | |
| switch to partitions #0, OK | |
| mmc1 is current device | |
| SD/MMC found on device 1 | |
| Failed to load 'boot.scr' | |
| 1176 bytes read in 2 ms (574.2 KiB/s) | |
| Loaded env from uEnv.txt | |
| Importing environment from mmc1 ... | |
| Running uenvcmd ... | |
| link up on port 1, speed 100, full duplex | |
| BOOTP broadcast 1 | |
| BOOTP broadcast 2 | |
| BOOTP broadcast 3 | |
| DHCP client bound to address 192.168.0.218 (1003 ms) | |
| link up on port 1, speed 100, full duplex | |
| Using ethernet@8000000port@1 device | |
| File transfer via NFS from server 192.168.0.1; our IP address is 192.168.0.218 | |
| Filename '/tftpboot/Image'. | |
| Load address: 0x82000000 | |
| Loading: *T ################################################################# | |
| ################################################################# | |
| ######### | |
| done | |
| Bytes transferred = 21674496 (14aba00 hex) | |
| link up on port 1, speed 100, full duplex | |
| Using ethernet@8000000port@1 device | |
| File transfer via NFS from server 192.168.0.1; our IP address is 192.168.0.218 | |
| Filename '/tftpboot/k3-am625-sk.dtb'. | |
| Load address: 0x88000000 | |
| Loading: *##### | |
| done | |
| Bytes transferred = 23043 (5a03 hex) | |
| ## Flattened Device Tree blob at 88000000 | |
| Booting using the fdt blob at 0x88000000 | |
| Loading Device Tree to 000000008fff7000, end 000000008ffffa02 ... OK | |
| Starting kernel ... | |
| [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034] | |
| [ 0.000000] Linux version 5.18.0-rc6-next-20220509-00003-g28a101e2daca (nmenon@kahuna) (Ubuntu clang version 14.0.0-++20210915091413+5ec1845cad9e-1~exp1~20210915072217.2675, LLD 14.0.0) #1 SMP PREEMPT Thu May 12 21:57:50 CDT 2022 | |
| [ 0.000000] Machine model: Texas Instruments AM625 SK | |
| [ 0.000000] earlycon: ns16550a0 at MMIO32 0x0000000002800000 (options '') | |
| [ 0.000000] printk: bootconsole [ns16550a0] enabled | |
| [ 0.000000] efi: UEFI not found. | |
| [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009db00000, size 12 MiB | |
| [ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@9db00000, compatible id shared-dma-pool | |
| [ 0.000000] NUMA: No NUMA configuration found | |
| [ 0.000000] NUMA: Faking a node at [mem 0x0000000080000000-0x00000000ffffffff] | |
| [ 0.000000] NUMA: NODE_DATA [mem 0xffbefb40-0xffbf1fff] | |
| [ 0.000000] Zone ranges: | |
| [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] | |
| [ 0.000000] DMA32 empty | |
| [ 0.000000] Normal empty | |
| [ 0.000000] Movable zone start for each node | |
| [ 0.000000] Early memory node ranges | |
| [ 0.000000] node 0: [mem 0x0000000080000000-0x000000009dafffff] | |
| [ 0.000000] node 0: [mem 0x000000009db00000-0x000000009e6fffff] | |
| [ 0.000000] node 0: [mem 0x000000009e700000-0x000000009e77ffff] | |
| [ 0.000000] node 0: [mem 0x000000009e780000-0x000000009fffffff] | |
| [ 0.000000] node 0: [mem 0x00000000a0000000-0x00000000ffffffff] | |
| [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x00000000ffffffff] | |
| [ 0.000000] cma: Reserved 32 MiB at 0x00000000fba00000 | |
| [ 0.000000] psci: probing for conduit method from DT. | |
| [ 0.000000] psci: PSCIv1.1 detected in firmware. | |
| [ 0.000000] psci: Using standard PSCI v0.2 function IDs | |
| [ 0.000000] psci: Trusted OS migration not required | |
| [ 0.000000] psci: SMC Calling Convention v1.2 | |
| [ 0.000000] percpu: Embedded 20 pages/cpu s43240 r8192 d30488 u81920 | |
| [ 0.000000] Detected VIPT I-cache on CPU0 | |
| [ 0.000000] CPU features: detected: GIC system register CPU interface | |
| [ 0.000000] CPU features: detected: ARM erratum 845719 | |
| [ 0.000000] Fallback order for Node 0: 0 | |
| [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 516096 | |
| [ 0.000000] Policy zone: DMA | |
| [ 0.000000] Kernel command line: console=ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000 root=PARTUUID=35832ce0-02 rw rootfstype=ext4 rootwait | |
| [ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) | |
| [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) | |
| [ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off | |
| [ 0.000000] Memory: 1964908K/2097152K available (13888K kernel code, 1326K rwdata, 4920K rodata, 896K init, 521K bss, 99476K reserved, 32768K cma-reserved) | |
| [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 | |
| [ 0.000000] rcu: Preemptible hierarchical RCU implementation. | |
| [ 0.000000] rcu: RCU event tracing is enabled. | |
| [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4. | |
| [ 0.000000] Trampoline variant of Tasks RCU enabled. | |
| [ 0.000000] Tracing variant of Tasks RCU enabled. | |
| [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. | |
| [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 | |
| [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 | |
| [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode | |
| [ 0.000000] GICv3: 256 SPIs implemented | |
| [ 0.000000] GICv3: 0 Extended SPIs implemented | |
| [ 0.000000] Root IRQ handler: gic_handle_irq | |
| [ 0.000000] GICv3: GICv3 features: 16 PPIs | |
| [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000001880000 | |
| [ 0.000000] ITS [mem 0x01820000-0x0182ffff] | |
| [ 0.000000] GIC: enabling workaround for ITS: Socionext Synquacer pre-ITS | |
| [ 0.000000] ITS@0x0000000001820000: Devices Table too large, reduce ids 20->19 | |
| [ 0.000000] ITS@0x0000000001820000: allocated 524288 Devices @80800000 (flat, esz 8, psz 64K, shr 0) | |
| [ 0.000000] ITS: using cache flushing for cmd queue | |
| [ 0.000000] GICv3: using LPI property table @0x0000000080040000 | |
| [ 0.000000] GIC: using cache flushing for LPI property table | |
| [ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x0000000080050000 | |
| [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. | |
| [ 0.000000] arch_timer: cp15 timer(s) running at 200.00MHz (phys). | |
| [ 0.000000] clocksource: arch_sys_counter: mask: 0x3ffffffffffffff max_cycles: 0x2e2049d3e8, max_idle_ns: 440795210634 ns | |
| [ 0.000001] sched_clock: 58 bits at 200MHz, resolution 5ns, wraps every 4398046511102ns | |
| [ 0.008290] random: get_random_bytes called from start_kernel+0x1d8/0x440 with crng_init=0 | |
| [ 0.016940] Console: colour dummy device 80x25 | |
| [ 0.021565] Calibrating delay loop (skipped), value calculated using timer frequency.. 400.00 BogoMIPS (lpj=800000) | |
| [ 0.032252] pid_max: default: 32768 minimum: 301 | |
| [ 0.037029] LSM: Security Framework initializing | |
| [ 0.041885] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) | |
| [ 0.049470] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) | |
| [ 0.059266] cblist_init_generic: Setting adjustable number of callback queues. | |
| [ 0.066728] cblist_init_generic: Setting shift to 2 and lim to 1. | |
| [ 0.073034] cblist_init_generic: Setting shift to 2 and lim to 1. | |
| [ 0.079512] rcu: Hierarchical SRCU implementation. | |
| [ 0.079573] printk: bootconsole [ns16550a0] printing thread started | |
| [ 0.091082] Platform MSI: msi-controller@1820000 domain created | |
| [ 0.091205] PCI/MSI: /bus@f0000/interrupt-controller@1800000/msi-controller@1820000 domain created | |
| [ 0.091506] EFI services will not be available. | |
| [ 0.091800] smp: Bringing up secondary CPUs ... | |
| [ 0.127517] Detected VIPT I-cache on CPU1 | |
| [ 0.127558] GICv3: CPU1: found redistributor 1 region 0:0x00000000018a0000 | |
| [ 0.127577] GICv3: CPU1: using allocated LPI pending table @0x0000000080060000 | |
| [ 0.127635] CPU1: Booted secondary processor 0x0000000001 [0x410fd034] | |
| [ 0.138915] Detected VIPT I-cache on CPU2 | |
| [ 0.138943] GICv3: CPU2: found redistributor 2 region 0:0x00000000018c0000 | |
| [ 0.138958] GICv3: CPU2: using allocated LPI pending table @0x0000000080070000 | |
| [ 0.138991] CPU2: Booted secondary processor 0x0000000002 [0x410fd034] | |
| [ 0.200458] Detected VIPT I-cache on CPU3 | |
| [ 0.200485] GICv3: CPU3: found redistributor 3 region 0:0x00000000018e0000 | |
| [ 0.200499] GICv3: CPU3: using allocated LPI pending table @0x0000000080080000 | |
| [ 0.200530] CPU3: Booted secondary processor 0x0000000003 [0x410fd034] | |
| [ 0.200598] smp: Brought up 1 node, 4 CPUs | |
| [ 0.200605] SMP: Total of 4 processors activated. | |
| [ 0.200609] CPU features: detected: 32-bit EL0 Support | |
| [ 0.200611] CPU features: detected: 32-bit EL1 Support | |
| [ 0.200617] CPU features: detected: CRC32 instructions | |
| [ 0.201317] CPU: All CPU(s) started at EL2 | |
| [ 0.201353] alternatives: patching kernel code | |
| [ 0.203222] devtmpfs: initialized | |
| [ 0.207401] KASLR disabled due to lack of seed | |
| [ 0.207601] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns | |
| [ 0.207624] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) | |
| [ 0.208907] pinctrl core: initialized pinctrl subsystem | |
| [ 0.209529] DMI not present or invalid. | |
| [ 0.210207] NET: Registered PF_NETLINK/PF_ROUTE protocol family | |
| [ 0.216960] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations | |
| [ 0.217189] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations | |
| [ 0.217358] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations | |
| [ 0.217459] audit: initializing netlink subsys (disabled) | |
| [ 0.217706] audit: type=2000 audit(0.152:1): state=initialized audit_enabled=0 res=1 | |
| [ 0.218358] thermal_sys: Registered thermal governor 'step_wise' | |
| [ 0.218363] thermal_sys: Registered thermal governor 'power_allocator' | |
| [ 0.218529] cpuidle: using governor menu | |
| [ 0.218727] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. | |
| [ 0.218852] ASID allocator initialised with 65536 entries | |
| [ 0.218860] HugeTLB: can optimize 4095 vmemmap pages for hugepages-1048576kB | |
| [ 0.218865] HugeTLB: can optimize 127 vmemmap pages for hugepages-32768kB | |
| [ 0.218869] HugeTLB: can optimize 7 vmemmap pages for hugepages-2048kB | |
| [ 0.218873] HugeTLB: can optimize 0 vmemmap pages for hugepages-64kB | |
| [ 0.219336] Serial: AMBA PL011 UART driver | |
| [ 0.237116] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages | |
| [ 0.237130] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages | |
| [ 0.237134] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages | |
| [ 0.237139] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages | |
| [ 0.238751] ACPI: Interpreter disabled. | |
| [ 0.239135] k3-chipinfo 43000014.chipid: Family:AM62X rev:SR1.0 JTAGID[0x0bb7e02f] Detected | |
| [ 0.240475] iommu: Default domain type: Translated | |
| [ 0.240485] iommu: DMA domain TLB invalidation policy: strict mode | |
| [ 0.240824] SCSI subsystem initialized | |
| [ 0.241229] usbcore: registered new interface driver usbfs | |
| [ 0.241266] usbcore: registered new interface driver hub | |
| [ 0.241293] usbcore: registered new device driver usb | |
| [ 0.241709] pps_core: LinuxPPS API ver. 1 registered | |
| [ 0.241713] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> | |
| [ 0.241728] PTP clock support registered | |
| [ 0.241848] EDAC MC: Ver: 3.0.0 | |
| [ 0.242659] FPGA manager framework | |
| [ 0.242759] Advanced Linux Sound Architecture Driver Initialized. | |
| [ 0.243510] vgaarb: loaded | |
| [ 0.243993] clocksource: Switched to clocksource arch_sys_counter | |
| [ 0.244239] VFS: Disk quotas dquot_6.6.0 | |
| [ 0.244282] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) | |
| [ 0.244485] pnp: PnP ACPI: disabled | |
| [ 0.250085] NET: Registered PF_INET protocol family | |
| [ 0.250389] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear) | |
| [ 0.251565] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear) | |
| [ 0.251650] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear) | |
| [ 0.251769] TCP bind hash table entries: 16384 (order: 6, 262144 bytes, linear) | |
| [ 0.252050] TCP: Hash tables configured (established 16384 bind 16384) | |
| [ 0.252226] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear) | |
| [ 0.252274] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear) | |
| [ 0.252493] NET: Registered PF_UNIX/PF_LOCAL protocol family | |
| [ 0.252976] RPC: Registered named UNIX socket transport module. | |
| [ 0.252983] RPC: Registered udp transport module. | |
| [ 0.252986] RPC: Registered tcp transport module. | |
| [ 0.252988] RPC: Registered tcp NFSv4.1 backchannel transport module. | |
| [ 0.252999] PCI: CLS 0 bytes, default 64 | |
| [ 0.253769] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available | |
| [ 0.254285] kvm [1]: IPA Size Limit: 40 bits | |
| [ 0.255238] kvm [1]: vgic-v2@100010000 | |
| [ 0.255257] kvm [1]: GIC system register CPU interface enabled | |
| [ 0.255345] kvm [1]: vgic interrupt IRQ9 | |
| [ 0.644486] printk: console [ttyS2] pri[nting thread started | |
| 0.255423] kvm [1]: Hyp mode initialized successfully | |
| [ 0.644492] printk: console [ttyS2] enabled | |
| [ 0.644496] printk: bootconsole [ns16550a0] disabled | |
| [ 0.655305] printk: bootconsole [ns16550a0] printing thread stopped | |
| [ 0.679322] spi-nor spi0.0: s28hs512t (65536 Kbytes) | |
| [ 0.679968] 7 fixed-partitions partitions found on MTD device fc40000.spi.0 | |
| [ 0.680020] Creating 7 MTD partitions on "fc40000.spi.0": | |
| [ 0.680031] 0x000000000000-0x000000080000 : "ospi.tiboot3" | |
| [ 0.681438] 0x000000080000-0x000000280000 : "ospi.tispl" | |
| [ 0.682466] 0x000000280000-0x000000680000 : "ospi.u-boot" | |
| [ 0.683544] 0x000000680000-0x0000006c0000 : "ospi.env" | |
| [ 0.684622] 0x0000006c0000-0x000000700000 : "ospi.env.backup" | |
| [ 0.685648] 0x000000800000-0x000003fc0000 : "ospi.rootfs" | |
| [ 0.686676] 0x000003fc0000-0x000004000000 : "ospi.phypattern" | |
| [ 0.740009] davinci_mdio 8000f00.mdio: davinci mdio revision 9.7, bus freq 1000000 | |
| [ 0.743086] davinci_mdio 8000f00.mdio: phy[0]: device 8000f00.mdio:00, driver TI DP83867 | |
| [ 0.743100] davinci_mdio 8000f00.mdio: phy[1]: device 8000f00.mdio:01, driver TI DP83867 | |
| [ 0.743146] am65-cpsw-nuss 8000000.ethernet: initializing am65 cpsw nuss version 0x6BA01103, cpsw version 0x6BA81103 Ports: 3 quirks:00000000 | |
| [ 0.759780] am65-cpsw-nuss 8000000.ethernet: set new flow-id-base 19 | |
| [ 0.780658] am65-cpsw-nuss 8000000.ethernet: initialized cpsw ale version 1.5 | |
| [ 0.780667] am65-cpsw-nuss 8000000.ethernet: ALE Table size 512 | |
| [ 0.812254] rtc-ti-k3 2b1f0000.rtc: registered as rtc0 | |
| [ 0.812287] rtc-ti-k3 2b1f0000.rtc: setting system clock to 1970-01-01T00:00:24 UTC (24) | |
| [ 0.829873] mmc0: CQHCI version 5.10 | |
| [ 0.840508] mmc2: CQHCI version 5.10 | |
| [ 0.872724] mmc0: SDHCI controller on fa10000.mmc [fa10000.mmc] using ADMA 64-bit | |
| [ 0.887821] pca953x 1-0022: supply vcc not found, using dummy regulator | |
| [ 0.887948] pca953x 1-0022: using AI | |
| [ 0.913102] gpio gpiochip3: (1-0022): not an immutable chip, please consider fixing it! | |
| [ 0.930569] mmc0: Command Queue Engine enabled | |
| [ 0.930597] mmc0: new HS200 MMC card at address 0001 | |
| [ 0.931387] mmcblk0: mmc0:0001 S0J56X 14.8 GiB | |
| [ 0.936952] mmcblk0boot0: mmc0:0001 S0J56X 31.5 MiB | |
| [ 0.938177] mmcblk0boot1: mmc0:0001 S0J56X 31.5 MiB | |
| [ 0.939165] mmcblk0rpmb: mmc0:0001 S0J56X 4.00 MiB, chardev (241:0) | |
| [ 1.027081] ALSA device list: | |
| [ 1.027091] No soundcards found. | |
| [ 1.027671] mmc1: CQHCI version 5.10 | |
| [ 1.066605] mmc1: SDHCI controller on fa00000.mmc [fa00000.mmc] using ADMA 64-bit | |
| [ 1.125341] mmc1: new ultra high speed SDR104 SDHC card at address aaaa | |
| [ 1.126177] mmcblk1: mmc1:aaaa SB16G 14.8 GiB | |
| [ 1.134723] mmcblk1: p1 p2 | |
| [ 2.354065] sdhci-am654 fa20000.mmc: Power on failed | |
| [ 2.384688] mmc2: SDHCI controller on fa20000.mmc [fa20000.mmc] using ADMA 64-bit | |
| [ 2.396433] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Quota mode: none. | |
| [ 2.396528] VFS: Mounted root (ext4 filesystem) on device 179:98. | |
| [ 2.397110] devtmpfs: mounted | |
| [ 2.397712] Freeing unused kernel memory: 896K | |
| [ 2.412042] Run /sbin/init as init process | |
| [ 2.540831] systemd[1]: System time before build time, advancing clock. | |
| [ 2.569871] systemd[1]: systemd 244.5+ running in system mode. (+PAM -AUDIT -SELINUX +IMA -APPARMOR -SMACK +SYSVINIT +UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN2 -IDN -PCRE2 default-hierarchy=hybrid) | |
| [ 2.570368] systemd[1]: Detected architecture arm64. | |
| Welcome to Arago 2021.09! | |
| [ 2.642875] systemd[1]: Set hostname to <am62xx-evm>. | |
| [ 2.883957] systemd[1]: Binding to IPv6 address not available since kernel does not support IPv6. | |
| [ 2.884098] systemd[1]: Binding to IPv6 address not available since kernel does not support IPv6. | |
| [ OK ] Created slice system-getty.slice 4.872002] random: crng init done | |
| m. | |
| [ 4.875276] systemd[1]: Created slice system-getty.slice. | |
| [ OK ] Created slice system-serial\x2dgett[ 4.897662] systemd[1]: Created slice system-serial\x2dgetty.slice. | |
| y.slice. | |
| [ OK ] Created slice User and Session Slic[ 4.921300] systemd[1]: Created slice User and Session Slice. | |
| e. | |
| [ OK ] Started Dispatch Password ts to [ 4.944480] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. | |
| Console Directory Watch. | |
| [ OK ] Started Forward Password R uests [ 4.968310] systemd[1]: Started Forward Password Requests to Wall Directory Watch. | |
| to Wall Directory Watch. | |
| [ OK ] Reached target Paths. | |
| [ 4.992312] systemd[1]: Reached target Paths. | |
| [ OK ] Reached target Remote File Systems 5.004112] systemd[1]: Reached target Remote File Systems. | |
| [0m. | |
| [ OK ] Reached target Slices. | |
| [ 5.024083] systemd[1]: Reached target Slices. | |
| [ OK ] Reached target Swap. | |
| [ 5.036097] systemd[1]: Reached target Swap. | |
| [ 5.063934] systemd[1]: Listening on RPCbind Server Activation Socket. | |
| [ OK ] Listening on RPCbind Server Activation Socket. | |
| [ OK ] Reached target RPC Port Mapper.[ 5.088310] systemd[1]: Reached target RPC Port Mapper. | |
| [ OK ] Listening on Process Core Dump Sock[ 5.115286] systemd[1]: Listening on Process Core Dump Socket. | |
| et. | |
| [ OK ] Listening on initctl Compatibility [ 5.136536] systemd[1]: Listening on initctl Compatibility Named Pipe. | |
| Named Pipe. | |
| [ OK ] Listening on Journal Audit Socket 5.160937] systemd[1]: Listening on Journal Audit Socket. | |
| 0m. | |
| [ OK ] Listening on Journal Socket (/dev/l[ 5.184647] systemd[1]: Listening on Journal Socket (/dev/log). | |
| og). | |
| [ OK ] Listening on Journal Socket. | |
| [ 5.208664] systemd[1]: Listening on Journal Socket. | |
| [ OK ] Listening on Network Service Netlin[ 5.220869] systemd[1]: Listening on Network Service Netlink Socket. | |
| k Socket. | |
| [ OK ] Listening on udev Control Socket 5.244737] systemd[1]: Listening on udev Control Socket. | |
| m. | |
| [ OK ] Listening on udev Kernel Socket[ 5.264461] systemd[1]: Listening on udev Kernel Socket. | |
| . | |
| Mounting Huge Pages File System... | |
| [ 5.288895] systemd[1]: Mounting Huge Pages File System... | |
| Mounting POSIX Message Queue File System..[ 5.304884] systemd[1]: Mounting POSIX Message Queue File System... | |
| . | |
| Mounting Kernel Debug File System... | |
| [ 5.332859] systemd[1]: Mounting Kernel Debug File System... | |
| Mounting Temporary Directory (/tmp)... | |
| [ 5.351218] systemd[1]: Mounting Temporary Directory (/tmp)... | |
| [ 5.363305] systemd[1]: Condition check resulted in Create list of static device nodes for the current kernel being skipped. | |
| [ 5.367916] systemd[1]: Starting Start psplash boot splash screen... | |
| Starting Start psplash boot splash screen... | |
| Starting RPC Bind...[ 5.400769] systemd[1]: Starting RPC Bind... | |
| [ 5.420500] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. | |
| [ 5.435930] systemd[1]: Starting Journal Service... | |
| Starting Journal Service... | |
| [ 5.459763] systemd[1]: Starting Load Kernel Modules... | |
| Starting Load Kernel Modules... | |
| Starting Remount Root and Kernel File Systems 5.480876] systemd[1]: Starting Remount Root and Kernel File Systems... | |
| [0m... | |
| [ 5.502990] EXT4-fs (mmcblk1p2): re-mounted. Quota mode: none. | |
| Starting udev Coldplug all Devices... | |
| [ 5.515212] systemd[1]: Starting udev Coldplug all Devices... | |
| [ OK ] Started RPC Bind. | |
| [ 5.533544] systemd[1]: Started RPC Bind. | |
| [ OK ] Started Journal Service. | |
| [ 5.544829] systemd[1]: Started Journal Service. | |
| [ OK ] Mounted Huge Pages File System. | |
| [ OK ] Mounted POSIX Message Queue File System. | |
| [ OK ] Mounted Kernel Debug File System. | |
| [ OK ] Mounted Temporary Directory (/tmp). | |
| [FAILED] Failed to start Start psplash boot splash screen. | |
| See 'systemctl status psplash-start.service' for details. | |
| [DEPEND] Dependency failed for Star progress communication helper. | |
| [FAILED] Failed to start Load Kernel Modules. | |
| See 'systemctl status systemd-modules-load.service' for details. | |
| [ OK ] Started Remount Root and Kernel File Systems. | |
| Mounting Kernel Configuration File System... | |
| Starting Flush Journal to Persistent Storage... | |
| [ 5.796742] systemd-journald[159]: Received client request to flush runtime journal. | |
| Starting Apply Kernel Variables... | |
| Starting Create Static Device Nodes in /dev... | |
| [ OK ] Mounted Kernel Configuration File System. | |
| [ OK ] Started Flush Journal to Persistent Storage. | |
| [ OK ] Started Apply Kernel Variables. | |
| [ OK ] Started Create Static Device Nodes in /dev. | |
| [ OK ] Reached target Local File Systems (Pre). | |
| Mounting /media/ram... | |
| Mounting /var/volatile... | |
| [ 5.987005] audit: type=1334 audit(1651977298.440:2): prog-id=5 op=LOAD | |
| Starting udev Kernel Device Manager... | |
| [ 5.987297] audit: type=1334 audit(1651977298.440:3): prog-id=6 op=LOAD | |
| [ OK ] Started udev Coldplug all Devices. | |
| [ OK ] Mounted /media/ram. | |
| [ OK ] Mounted /var/volatile. | |
| Starting udev Wait for Complete Device Initialization... | |
| Starting Load/Save Random Seed... | |
| [ OK ] Started udev Kernel Device Manager. | |
| [ OK ] Started Load/Save Random Seed. | |
| [ OK ] Found device /dev/disk/by-uuid/8AD1-DC91. | |
| [ OK ] Started udev Wait for Complete Device Initialization. | |
| Mounting /boot... | |
| [ OK ] Started Hardware RNG Entropy Gather[ 7.787732] FAT-fs (mmcblk1p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. | |
| er Daemon. | |
| [ OK ] Mounted /boot. | |
| [ OK ] Reached target Local File Systems. | |
| Starting Create Volatile Files and Directories... | |
| [ OK ] Started Create Volatile Files and Directories. | |
| Starting Network Time Synchronization... | |
| Starting Update UTMP about System Boot/Shutdown... | |
| [ OK ] Started Update UTMP about System Boot/Shutdown. | |
| [ OK ] Started Network Time Synchronization. | |
| [ OK ] Reached target System Initialization. | |
| [ OK ] Started Daily Cleanup of Temporary Directories. | |
| [ OK ] Reached target System Time Set. | |
| [ OK ] Reached target System Time Synchronized. | |
| [ OK ] Started Daily rotation of log files. | |
| [ OK ] Reached target Timers. | |
| [ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket. | |
| [ OK ] Listening on D-Bus System Message Bus Socket. | |
| [ OK ] Listening on dropbear.socket. | |
| [ OK ] Reached target Sockets. | |
| [ OK ] Reached target Basic System. | |
| [ OK ] Started Job spooling tools. | |
| [ OK ] Started Periodic Command Scheduler. | |
| [ OK ] Started D-Bus System Message Bus. | |
| Starting Print notice about GPLv3 packages... | |
| Starting IPv6 Packet Filtering Framework... | |
| Starting IPv4 Packet Filtering Framework... | |
| [ OK ] Started irqbalance daemon. | |
| Starting Reboot and dump vmcore via kexec... | |
| Starting rc.pvr.service... | |
| [ 8.499824] audit: type=1334 audit(1651977300.952:4): prog-id=7 op=LOAD | |
| [ 8.518151] audit: type=1334 audit(1651977300.972:5): prog-id=8 op=LOAD | |
| Starting Login Service... | |
| [ OK ] Started TEE Supplicant. | |
| [ OK ] Started IPv6 Packet Filtering Framework. | |
| [ OK ] Started IPv4 Packet Filtering Framework. | |
| [ OK ] Started Reboot and dump vmcore via kexec. | |
| [ OK ] Started rc.pvr.service. | |
| [ OK ] Reached target Network (Pre). | |
| Starting Network Service... | |
| Starting weston.service... | |
| [ OK ] Started Network Service. | |
| Starting Wait for Network to be Configured... | |
| Starting Network Name Resolution... | |
| [ 8.811268] am65-cpsw-nuss 8000000.ethernet eth1: PHY [8000f00.mdio:01] driver [TI DP83867] (irq=POLL) | |
| [ 8.811296] am65-cpsw-nuss 8000000.ethernet eth1: configuring for phy/rgmii-rxid link mode | |
| [ 8.845526] am65-cpsw-nuss 8000000.ethernet eth0: PHY [8000f00.mdio:00] driver [TI DP83867] (irq=POLL) | |
| [ 8.845551] am65-cpsw-nuss 8000000.ethernet eth0: configuring for phy/rgmii-rxid link mode | |
| [ OK ] Started Login Service. | |
| [ OK ] Started Network Name Resolution. | |
| [ OK ] Reached target Network. | |
| [ OK ] Reached target Host and Network Name Lookups. | |
| Starting Avahi mDNS/DNS-SD Stack... | |
| Starting Enable and configure wl18xx bluetooth stack... | |
| [ OK ] Started NFS status monitor for NFSv2/3 locking.. | |
| Starting Simple Network Ma ent Protocol (SNMP) Daemon.... | |
| Starting Permit User Sessions... | |
| [ OK ] Started Enable and configure wl18xx bluetooth stack. | |
| [ OK ] Started Permit User Sessions. | |
| [ OK ] Started Avahi mDNS/DNS-SD Stack. | |
| [ OK ] Started Getty on tty1. | |
| [ OK ] Started Serial Getty on ttyS2. | |
| [ OK ] Reached target Login Prompts. | |
| Starting Synchronize System and HW clocks... | |
| [ OK ] Started Synchronize System and HW clocks. | |
| [ OK ] Started Simple Network Man ement Protocol (SNMP) Daemon.. | |
| *************************************************************** | |
| *************************************************************** | |
| NOTICE: This file system contains the following GPLv3 packages: | |
| autoconf | |
| bash | |
| bc | |
| binutils | |
| cifs-utils | |
| coreutils-stdbuf | |
| coreutils | |
| cpio | |
| cpp-symlinks | |
| cpp | |
| dosfstools | |
| elfutils | |
| g++-symlinks | |
| g++ | |
| gawk | |
| gcc-symlinks | |
| gcc | |
| gdb | |
| gdbserver | |
| gettext | |
| glmark2 | |
| gstreamer1.0-libav | |
| gzip | |
| less | |
| libasm1 | |
| libbfd | |
| libdw1 | |
| libelf1 | |
| libgdbm-compat4 | |
| libgdbm6 | |
| libgettextlib | |
| libgettextsrc | |
| libgmp10 | |
| libidn2-0 | |
| libmpc3 | |
| libmpfr6 | |
| libreadline8 | |
| libunistring2 | |
| m4 | |
| make | |
| nettle | |
| parted | |
| tar | |
| which | |
| If you do not wish to distribute GPLv3 components please remove | |
| the above packages prior to distribution. This can be done using | |
| the opkg remove command. i.e.: | |
| opkg remove <package> | |
| Where <package> is the name printed in the list above | |
| NOTE: If the package is a dependency of another package you | |
| will be notified of the dependent packages. You should | |
| use the --force-removal-of-dependent-packages option to | |
| also remove the dependent packages as well | |
| *************************************************************** | |
| *************************************************************** | |
| [ OK ] Started Print notice about GPLv3 packages. | |
| [ 10.917508] am65-cpsw-nuss 8000000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx | |
| [ OK ] Started weston.service. | |
| Starting Matrix GUI... | |
| Starting telnetd.service... | |
| [ OK ] Started Matrix GUI. | |
| [ OK ] Started telnetd.service. | |
| [ OK ] Started Wait for Network to be Configured. | |
| [ OK ] Reached target Network is Online. | |
| Starting Lighttpd Daemon... | |
| Starting LSB: network benchmark... | |
| [ OK ] Started strongSwan IPsec I IKEv2 daemon using ipsec.conf. | |
| [ OK ] Started Lighttpd Daemon. | |
| [ OK ] Started LSB: network benchmark. | |
| Starting thermal-zone-init.service... | |
| [ OK ] Started thermal-zone-init.service. | |
| [ OK ] Reached target Multi-User System. | |
| Starting Update UTMP about System Runlevel Changes... | |
| [ OK ] Started Update UTMP about System Runlevel Changes. | |
| [ 12.609232] audit: type=1701 audit(1651977305.064:6): auid=4294967295 uid=0 gid=0 ses=4294967295 pid=720 comm="matrix_browser" exe="/usr/bin/matrix_browser" sig=6 res=1 | |
| [ 12.636729] audit: type=1334 audit(1651977305.092:7): prog-id=9 op=LOAD | |
| [ 12.637474] audit: type=1334 audit(1651977305.092:8): prog-id=10 op=LOAD | |
| _____ _____ _ _ | |
| | _ |___ ___ ___ ___ | _ |___ ___ |_|___ ___| |_ | |
| | | _| .'| . | . | | __| _| . | | | -_| _| _| | |
| |__|__|_| |__,|_ |___| |__| |_| |___|_| |___|___|_| | |
| |___| |___| | |
| Arago Project http://arago-project.org am62xx-evm ttyS2 | |
| Arago 2021.09 am62xx-evm ttyS2 | |
| am62xx-evm login: root | |
| [ 15.403307] audit: type=1006 audit(1651977307.856:9): pid=742 uid=0 old-auid=4294967295 auid=0 tty=(none) old-ses=4294967295 ses=1 res=1 | |
| [ 15.403348] audit: type=1300 audit(1651977307.856:9): arch=c00000b7 syscall=64 success=yes exit=1 a0=8 a1=fffff56456d8 a2=1 a3=ffff8ea137e0 items=0 ppid=1 pid=742 auid=0 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=1 comm="(systemd)" exe="/lib/systemd/systemd" key=(null) | |
| [ 15.403361] audit: type=1327 audit(1651977307.856:9): proctitle="(systemd)" | |
| [ 15.456322] audit: type=1334 audit(1651977307.884:10): prog-id=11 op=LOAD | |
| [ 15.456475] audit: type=1300 audit(1651977307.884:10): arch=c00000b7 syscall=280 success=yes exit=8 a0=5 a1=fffff4743ce8 a2=70 a3=0 items=0 ppid=1 pid=742 auid=0 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=1 comm="systemd" exe="/lib/systemd/systemd" key=(null) | |
| [ 15.456535] audit: type=1327 audit(1651977307.884:10): proctitle=2F6C69622F73797374656D642F73797374656D64002D2D75736572 | |
| [ 15.456639] audit: type=1334 audit(1651977307.912:11): prog-id=0 op=UNLOAD | |
| root@am62xx-evm:~# while [ true ]; do cat /proc/interrupts|grep rtc;./rtctest; daate; hwclock --rtc /dev/rtc0 --get; ./setdate /dev/rtc0 10-05-2022 19:48:00; hwcllock --rtc /dev/rtc0 --get; hwclock --rtc /dev/rtc0 --hctosys; done | |
| 231: 0 0 0 0 GICv3 132 Level 2b1f0000.rtc | |
| TAP version 13 | |
| 1..8 | |
| # Starting 8 tests from 2 test cases. | |
| # RUN rtc.date_read ... | |
| # rtctest.c:49:date_read:Current RTC date/time is 08/05/2022 02:35:10. | |
| # OK rtc.date_read | |
| ok 1 rtc.date_read | |
| # RUN rtc.date_read_loop ... | |
| # rtctest.c:88:date_read_loop:Continuously reading RTC time for 30s (with 11ms breaks after every read). | |
| [ 21.600171] kauditd_printk_skb: 4 callbacks suppressed | |
| [ 21.600189] audit: type=1334 audit(1651977314.056:14): prog-id=0 op=UNLOAD | |
| [ 21.600202] audit: type=1334 audit(1651977314.056:15): prog-id=0 op=UNLOAD | |
| # rtctest.c:115:date_read_loop:Performed 2730 RTC time reads. | |
| # OK rtc.date_read_loop | |
| ok 2 rtc.date_read_loop | |
| # RUN rtc.uie_read ... | |
| # OK rtc.uie_read | |
| ok 3 rtc.uie_read | |
| # RUN rtc.uie_select ... | |
| # OK rtc.uie_select | |
| ok 4 rtc.uie_select | |
| # RUN rtc.alarm_alm_set ... | |
| # rtctest.c:202:alarm_alm_set:Alarm time now set to 02:35:50. | |
| # rtctest.c:222:alarm_alm_set:data: 1a0 | |
| # OK rtc.alarm_alm_set | |
| ok 5 rtc.alarm_alm_set | |
| # RUN rtc.alarm_wkalm_set ... | |
| # rtctest.c:258:alarm_wkalm_set:Alarm time now set to 08/05/2022 02:35:53. | |
| # OK rtc.alarm_wkalm_set | |
| ok 6 rtc.alarm_wkalm_set | |
| # RUN rtc.alarm_alm_set_minute ... | |
| # rtctest.c:304:alarm_alm_set_minute:Alarm time now set to 02:36:00. | |
| # rtctest.c:324:alarm_alm_set_minute:data: 1a0 | |
| # OK rtc.alarm_alm_set_minute | |
| ok 7 rtc.alarm_alm_set_minute | |
| # RUN rtc.alarm_wkalm_set_minute ... | |
| # rtctest.c:360:alarm_wkalm_set_minute:Alarm time now set to 08/05/2022 02:37:00. | |
| # OK rtc.alarm_wkalm_set_minute | |
| ok 8 rtc.alarm_wkalm_set_minute | |
| # PASSED: 8 / 8 tests passed. | |
| # Totals: pass:8 fail:0 xfail:0 xpass:0 skip:0 error:0 | |
| Sun May 8 02:37:00 UTC 2022 | |
| 2022-05-08 02:37:00.013782+00:00 | |
| Test will set RTC date/time to 10-5-2022, 19:48:00. | |
| Current RTC date/time is 10-5-2022, 19:48:00. | |
| 2022-05-10 19:48:00.003364+00:00 | |
| 231: 13 0 0 0 GICv3 132 Level 2b1f0000.rtc | |
| TAP version 13 | |
| 1..8 | |
| # Starting 8 tests from 2 test cases. | |
| # RUN rtc.date_read ... | |
| # rtctest.c:49:date_read:Current RTC date/time is 10/05/2022 19:48:02. | |
| # OK rtc.date_read | |
| ok 1 rtc.date_read | |
| # RUN rtc.date_read_loop ... | |
| # rtctest.c:88:date_read_loop:Continuously reading RTC time for 30s (with 11ms breaks after every read). | |
| # rtctest.c:115:date_read_loop:Performed 2799 RTC time reads. | |
| # OK rtc.date_read_loop | |
| ok 2 rtc.date_read_loop | |
| # RUN rtc.uie_read ... | |
| # OK rtc.uie_read | |
| ok 3 rtc.uie_read | |
| # RUN rtc.uie_select ... | |
| # OK rtc.uie_select | |
| ok 4 rtc.uie_select | |
| # RUN rtc.alarm_alm_set ... | |
| # rtctest.c:202:alarm_alm_set:Alarm time now set to 19:48:42. | |
| # rtctest.c:222:alarm_alm_set:data: 1a0 | |
| # OK rtc.alarm_alm_set | |
| ok 5 rtc.alarm_alm_set | |
| # RUN rtc.alarm_wkalm_set ... | |
| # rtctest.c:258:alarm_wkalm_set:Alarm time now set to 10/05/2022 19:48:45. | |
| # OK rtc.alarm_wkalm_set | |
| ok 6 rtc.alarm_wkalm_set | |
| # RUN rtc.alarm_alm_set_minute ... | |
| # rtctest.c:304:alarm_alm_set_minute:Alarm time now set to 19:49:00. | |
| # rtctest.c:324:alarm_alm_set_minute:data: 1a0 | |
| # OK rtc.alarm_alm_set_minute | |
| ok 7 rtc.alarm_alm_set_minute | |
| # RUN rtc.alarm_wkalm_set_minute ... | |
| # rtctest.c:360:alarm_wkalm_set_minute:Alarm time now set to 10/05/2022 19:50:00. | |
| # OK rtc.alarm_wkalm_set_minute | |
| ok 8 rtc.alarm_wkalm_set_minute | |
| # PASSED: 8 / 8 tests passed. | |
| # Totals: pass:8 fail:0 xfail:0 xpass:0 skip:0 error:0 | |
| Tue May 10 19:50:00 UTC 2022 | |
| 2022-05-10 19:50:00.008431+00:00 | |
| Test will set RTC date/time to 10-5-2022, 19:48:00. | |
| Current RTC date/time is 10-5-2022, 19:48:00. | |
| 2022-05-10 19:48:00.003401+00:00 | |
| 231: 27 0 0 0 GICv3 132 Level 2b1f0000.rtc | |
| TAP version 13 | |
| 1..8 | |
| # Starting 8 tests from 2 test cases. | |
| # RUN rtc.date_read ... | |
| # rtctest.c:49:date_read:Current RTC date/time is 10/05/2022 19:48:02. | |
| # OK rtc.date_read | |
| ok 1 rtc.date_read | |
| # RUN rtc.date_read_loop ... | |
| # rtctest.c:88:date_read_loop:Continuously reading RTC time for 30s (with 11ms breaks after every read). | |
| # rtctest.c:115:date_read_loop:Performed 2799 RTC time reads. | |
| # OK rtc.date_read_loop | |
| ok 2 rtc.date_read_loop | |
| # RUN rtc.uie_read ... | |
| # OK rtc.uie_read | |
| ok 3 rtc.uie_read | |
| # RUN rtc.uie_select ... | |
| # OK rtc.uie_select | |
| ok 4 rtc.uie_select | |
| # RUN rtc.alarm_alm_set ... | |
| # rtctest.c:202:alarm_alm_set:Alarm time now set to 19:48:42. | |
| # rtctest.c:222:alarm_alm_set:data: 1a0 | |
| # OK rtc.alarm_alm_set | |
| ok 5 rtc.alarm_alm_set | |
| # RUN rtc.alarm_wkalm_set ... | |
| # rtctest.c:258:alarm_wkalm_set:Alarm time now set to 10/05/2022 19:48:45. | |
| # OK rtc.alarm_wkalm_set | |
| ok 6 rtc.alarm_wkalm_set | |
| # RUN rtc.alarm_alm_set_minute ... | |
| # rtctest.c:304:alarm_alm_set_minute:Alarm time now set to 19:49:00. | |
| # rtctest.c:324:alarm_alm_set_minute:data: 1a0 | |
| # OK rtc.alarm_alm_set_minute | |
| ok 7 rtc.alarm_alm_set_minute | |
| # RUN rtc.alarm_wkalm_set_minute ... | |
| # rtctest.c:360:alarm_wkalm_set_minute:Alarm time now set to 10/05/2022 19:50:00. | |
| # OK rtc.alarm_wkalm_set_minute | |
| ok 8 rtc.alarm_wkalm_set_minute | |
| # PASSED: 8 / 8 tests passed. | |
| # Totals: pass:8 fail:0 xfail:0 xpass:0 skip:0 error:0 | |
| Tue May 10 19:50:00 UTC 2022 | |
| 2022-05-10 19:50:00.008691+00:00 | |
| Test will set RTC date/time to 10-5-2022, 19:48:00. |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment