Skip to content

Instantly share code, notes, and snippets.

@nmenon

nmenon/beagleplay2 Secret

Created March 16, 2023 15:07
Show Gist options
  • Save nmenon/2e7647970a4d6af05017e545ac0f8218 to your computer and use it in GitHub Desktop.
Save nmenon/2e7647970a4d6af05017e545ac0f8218 to your computer and use it in GitHub Desktop.
Download ZIP
Raw
beagleplay2
U-Boot SPL 2021.01-ge18343eb (Mar 02 2023 - 15:51:35 +0000)
SYSFW ABI: 3.1 (firmware rev 0x0008 '8.6.4--v08.06.04 (Chill Capybar')
SPL initial stack usage: 13424 bytes
Trying to boot from MMC1
Loading Environment from MMC... MMC: block number 0x3500 exceeds max(0x2000)
*** Warning - !read failed, using default environment
init_env from device 9 not supported!
Starting ATF on ARM64 core...
NOTICE: BL31: v2.7(release):v2.7.0-519-gc19116dd6
NOTICE: BL31: Built : 15:51:35, Mar 2 2023
I/TC:
I/TC: OP-TEE version: 3.19.0-rc1 (gcc version 10.2.1 20210110 (Debian 10.2.1-6)) #1 Thu Mar 2 15:51:35 UTC 2023 aarch64
I/TC: WARNING: This OP-TEE configuration might be insecure!
I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html
I/TC: Primary CPU initializing
I/TC: SYSFW ABI: 3.1 (firmware rev 0x0008 '8.6.4--v08.06.04 (Chill Capybar')
I/TC: HUK Initialized
I/TC: Primary CPU switching to normal world boot
U-Boot SPL 2021.01-ge18343eb (Mar 02 2023 - 15:51:35 +0000)
SYSFW ABI: 3.1 (firmware rev 0x0008 '8.6.4--v08.06.04 (Chill Capybar')
Trying to boot from MMC1
U-Boot 2021.01-ge18343eb (Mar 02 2023 - 15:51:35 +0000)
SoC: AM62X SR1.0 GP
Model: BeagleBoard.org BeaglePlay
Board: BEAGLEPLAY-A0- rev 02
DRAM: 2 GiB
MMC: mmc@fa10000: 0, mmc@fa00000: 1, mmc@fa20000: 2
Loading Environment from MMC... MMC: block number 0x3500 exceeds max(0x2000)
*** Warning - !read failed, using default environment
In: serial@2800000
Out: serial@2800000
Err: serial@2800000
Error: Can't set serial# to SSSS
Net: Could not get PHY for ethernet@8000000port@1: addr 0
am65_cpsw_nuss_port ethernet@8000000port@1: phy_connect() failed
No ethernet found.
Press SPACE to abort autoboot in 2 seconds
switch to partitions #0, OK
mmc1 is current device
Scanning mmc 1:1...
Found /extlinux/extlinux.conf
Retrieving file: /extlinux/extlinux.conf
192 bytes read in 6 ms (31.3 KiB/s)
1: Linux microSD
Retrieving file: /initrd.img
15406078 bytes read in 665 ms (22.1 MiB/s)
Retrieving file: /Image
21717504 bytes read in 935 ms (22.2 MiB/s)
append: root=/dev/mmcblk1p2 ro rootfstype=ext4 rootwait net.ifnames=0 quiet
Retrieving file: /k3-am625-beagleplay.dtb
32307 bytes read in 7 ms (4.4 MiB/s)
## Flattened Device Tree blob at 88000000
Booting using the fdt blob at 0x88000000
Loading Ramdisk to 8f14e000, end 8ffff3fe ... OK
Loading Device Tree to 000000008f143000, end 000000008f14de32 ... OK
Starting kernel ...
I/TC: Secondary CPU 1 initializing
I/TC: Secondary CPU 1 switching to normal world boot
I/TC: Secondary CPU 2 initializing
I/TC: Secondary CPU 2 switching to normal world boot
I/TC: Secondary CPU 3 initializing
I/TC: Secondary CPU 3 switching to normal world boot
[ 0.256788] am65-cpsw-nuss 8000000.ethernet: Use random MAC address
[ 6.547033] bq32k 0-0068: hctosys: unable to read the hardware clock
[ OK ] Finished Tell Plymouth To Write Out Runtime Data.
[ OK ] Finished Set console font and keymap.
[ OK ] Finished Create Volatile Files and Directories.
Starting Network Name Resolution...
Starting Network Time Synchronization...
Starting Update UTMP about System Boot/Shutdown...
[ OK ] Finished Update UTMP about System Boot/Shutdown.
[ OK ] Finished Raise network interfaces.
[ OK ] Listening on Load/Save RF …itch Status /dev/rfkill Watch.
[ OK ] Started Network Time Synchronization.
[ OK ] Reached target System Initialization.
[ OK ] Started Daily Cleanup of Temporary Directories.
[ OK ] Reached target System Time Set.
[ OK ] Reached target System Time Synchronized.
[ OK ] Started Periodic ext4 Onli…ata Check for All Filesystems.
[ OK ] Started Discard unused blocks once a week.
[ OK ] Started Daily rotation of log files.
[ OK ] Reached target Timers.
[ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket.
[ OK ] Listening on D-Bus System Message Bus Socket.
Starting Docker Socket for the API.
[ OK ] Listening on GPS (Global P…ioning System) Daemon Sockets.
[ OK ] Listening on Docker Socket for the API.
[ OK ] Reached target Sockets.
[ OK ] Reached target Basic System.
Starting Avahi mDNS/DNS-SD Stack...
Starting BeagleBoard Generate Symlinks...
Starting BeagleBoard.org USB gadgets...
[ OK ] Started Regular background program processing daemon.
[ OK ] Started D-Bus System Message Bus.
Starting dphys-swapfile - …unt, and delete a swap file...
Starting Remove Stale Onli…t4 Metadata Check Snapshots...
Starting Initialize hardware monitoring sensors...
Starting System Logging Service...
Starting User Login Management...
Starting LSB: Start daemon at boot time...
Starting Disk Manager...
Starting WPA supplicant...
[ OK ] Finished Initialize hardware monitoring sensors.
[ OK ] Started System Logging Service.
[ OK ] Finished BeagleBoard Generate Symlinks.
[ OK ] Finished dphys-swapfile - …mount, and delete a swap file.
[ OK ] Started LSB: Start daemon at boot time.
[ OK ] Started Network Name Resolution.
[ OK ] Finished Remove Stale Onli…ext4 Metadata Check Snapshots.
[ OK ] Reached target Host and Network Name Lookups.
[ OK ] Found device /dev/ttyGS0.
[ OK ] Started User Login Management.
[ OK ] Started Avahi mDNS/DNS-SD Stack.
[ OK ] Started WPA supplicant.
[ OK ] Reached target Network.
[ OK ] Reached target Network is Online.
Starting BeagleBoard.org Code Server...
Starting Beagle Flasher Shutdown...
Starting containerd container runtime...
Starting LSB: disk temperature monitoring daemon...
Starting A high performanc… and a reverse proxy server...
Starting OpenBSD Secure Shell server...
Starting Permit User Sessions...
[ OK ] Finished Beagle Flasher Shutdown.
Starting Authorization Manager...
[ OK ] Finished Permit User Sessions.
Starting Light Display Manager...
Starting Hold until boot process finishes up...
[ OK ] Started LSB: disk temperature monitoring daemon.
Starting Load/Save RF Kill Switch Status...
[ OK ] Started Load/Save RF Kill Switch Status.
[ OK ] Started Authorization Manager.
[ OK ] Started BeagleBoard.org Code Server.
[ OK ] Created slice system-wpa_supplicant.slice.
[ OK ] Started WPA supplicant dae… (interface-specific version).
[ OK ] Started OpenBSD Secure Shell server.
[ OK ] Finished Hold until boot process finishes up.
[FAILED] Failed to start Docker Application Container Engine.
[FAILED] Failed to start Light Display Manager.
[FAILED] Failed to start Docker Application Container Engine.
Debian GNU/Linux 11 BeaglePlay ttyS2
BeagleBoard.org Debian Bullseye Xfce Image 2023-03-09
Support: https://bbb.io/debian
default username:password is [debian:temppwd]
BeaglePlay login: debian
Password:
The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.
Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
Last login: Sat Mar 11 18:50:07 UTC 2023 on ttyS2
uname -adebian@BeaglePlay:~$ uname -a
Linux BeaglePlay 6.3.0-rc1-00003-gce40aed1cb6a #kernel_patch_verify_build SMP PREEMPT Thu Mar 16 08:23:09 CDT 2 aarch64 GNU/Linux
debian@BeaglePlay:~$ dmesg
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[ 0.000000] Linux version 6.3.0-rc1-00003-gce40aed1cb6a (nmenon@uda0133052) (Ubuntu clang version 17.0.0 (++20230313031335+71e2d7106fe5-1~exp1~20230313151429.801), Ubuntu LLD 17.0.0) #kernel_patch_verify_build SMP PREEMPT Thu Mar 16 08:23:09 CDT 2
[ 0.000000] Machine model: BeagleBoard.org BeaglePlay
[ 0.000000] efi: UEFI not found.
[ 0.000000] OF: reserved mem: 0x000000009c700000..0x000000009c7fffff (1024 KiB) map non-reusable ramoops@9ca00000
[ 0.000000] Reserved memory: created DMA memory pool at 0x000000009db00000, size 12 MiB
[ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@9db00000, compatible id shared-dma-pool
[ 0.000000] OF: reserved mem: 0x000000009db00000..0x000000009e6fffff (12288 KiB) nomap non-reusable r5f-dma-memory@9db00000
[ 0.000000] OF: reserved mem: 0x000000009e780000..0x000000009e7fffff (512 KiB) nomap non-reusable tfa@9e780000
[ 0.000000] OF: reserved mem: 0x000000009e800000..0x000000009fffffff (24576 KiB) nomap non-reusable optee@9e800000
[ 0.000000] NUMA: No NUMA configuration found
[ 0.000000] NUMA: Faking a node at [mem 0x0000000080000000-0x00000000ffffffff]
[ 0.000000] NUMA: NODE_DATA [mem 0xffbe29c0-0xffbe4fff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff]
[ 0.000000] DMA32 empty
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000080000000-0x000000009dafffff]
[ 0.000000] node 0: [mem 0x000000009db00000-0x000000009e6fffff]
[ 0.000000] node 0: [mem 0x000000009e700000-0x000000009e77ffff]
[ 0.000000] node 0: [mem 0x000000009e780000-0x000000009fffffff]
[ 0.000000] node 0: [mem 0x00000000a0000000-0x00000000ffffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x00000000ffffffff]
[ 0.000000] cma: Reserved 32 MiB at 0x00000000fba00000
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.1 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: Trusted OS migration not required
[ 0.000000] psci: SMC Calling Convention v1.2
[ 0.000000] percpu: Embedded 21 pages/cpu s48744 r8192 d29080 u86016
[ 0.000000] pcpu-alloc: s48744 r8192 d29080 u86016 alloc=21*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] CPU features: detected: GIC system register CPU interface
[ 0.000000] CPU features: detected: ARM erratum 845719
[ 0.000000] alternatives: applying boot alternatives
[ 0.000000] Fallback order for Node 0: 0
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 516096
[ 0.000000] Policy zone: DMA
[ 0.000000] Kernel command line: root=/dev/mmcblk1p2 ro rootfstype=ext4 rootwait net.ifnames=0 quiet
[ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off
[ 0.000000] Memory: 1948688K/2097152K available (13952K kernel code, 1368K rwdata, 4692K rodata, 1024K init, 538K bss, 115696K reserved, 32768K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000] rcu: RCU event tracing is enabled.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[ 0.000000] Trampoline variant of Tasks RCU enabled.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[ 0.000000] GICv3: 256 SPIs implemented
[ 0.000000] GICv3: 0 Extended SPIs implemented
[ 0.000000] Root IRQ handler: gic_handle_irq
[ 0.000000] GICv3: GICv3 features: 16 PPIs
[ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000001880000
[ 0.000000] ITS [mem 0x01820000-0x0182ffff]
[ 0.000000] GIC: enabling workaround for ITS: Socionext Synquacer pre-ITS
[ 0.000000] ITS@0x0000000001820000: Devices Table too large, reduce ids 20->19
[ 0.000000] ITS@0x0000000001820000: allocated 524288 Devices @80800000 (flat, esz 8, psz 64K, shr 0)
[ 0.000000] ITS: using cache flushing for cmd queue
[ 0.000000] GICv3: using LPI property table @0x0000000080040000
[ 0.000000] GIC: using cache flushing for LPI property table
[ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x0000000080050000
[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.000000] arch_timer: cp15 timer(s) running at 200.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0x3ffffffffffffff max_cycles: 0x2e2049d3e8, max_idle_ns: 440795210634 ns
[ 0.000000] sched_clock: 58 bits at 200MHz, resolution 5ns, wraps every 4398046511102ns
[ 0.000285] Console: colour dummy device 80x25
[ 0.000297] printk: console [tty0] enabled
[ 0.000426] Calibrating delay loop (skipped), value calculated using timer frequency.. 400.00 BogoMIPS (lpj=800000)
[ 0.000441] pid_max: default: 32768 minimum: 301
[ 0.000504] LSM: initializing lsm=capability,integrity
[ 0.000629] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[ 0.000655] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[ 0.002550] cblist_init_generic: Setting adjustable number of callback queues.
[ 0.002576] cblist_init_generic: Setting shift to 2 and lim to 1.
[ 0.002649] cblist_init_generic: Setting shift to 2 and lim to 1.
[ 0.002817] rcu: Hierarchical SRCU implementation.
[ 0.002823] rcu: Max phase no-delay instances is 1000.
[ 0.003078] Platform MSI: msi-controller@1820000 domain created
[ 0.003236] PCI/MSI: /bus@f0000/interrupt-controller@1800000/msi-controller@1820000 domain created
[ 0.003659] EFI services will not be available.
[ 0.003933] smp: Bringing up secondary CPUs ...
[ 0.012680] Detected VIPT I-cache on CPU1
[ 0.012762] GICv3: CPU1: found redistributor 1 region 0:0x00000000018a0000
[ 0.012780] GICv3: CPU1: using allocated LPI pending table @0x0000000080060000
[ 0.012838] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
[ 0.021572] Detected VIPT I-cache on CPU2
[ 0.021628] GICv3: CPU2: found redistributor 2 region 0:0x00000000018c0000
[ 0.021643] GICv3: CPU2: using allocated LPI pending table @0x0000000080070000
[ 0.021681] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
[ 0.030328] Detected VIPT I-cache on CPU3
[ 0.030386] GICv3: CPU3: found redistributor 3 region 0:0x00000000018e0000
[ 0.030399] GICv3: CPU3: using allocated LPI pending table @0x0000000080080000
[ 0.030430] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
[ 0.030494] smp: Brought up 1 node, 4 CPUs
[ 0.030512] SMP: Total of 4 processors activated.
[ 0.030517] CPU features: detected: 32-bit EL0 Support
[ 0.030521] CPU features: detected: 32-bit EL1 Support
[ 0.030526] CPU features: detected: CRC32 instructions
[ 0.030605] CPU: All CPU(s) started at EL2
[ 0.030636] alternatives: applying system-wide alternatives
[ 0.033086] devtmpfs: initialized
[ 0.039615] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.039655] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.041027] pinctrl core: initialized pinctrl subsystem
[ 0.041684] DMI not present or invalid.
[ 0.042321] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.043598] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations
[ 0.043931] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.044116] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.044262] audit: initializing netlink subsys (disabled)
[ 0.044465] audit: type=2000 audit(0.044:1): state=initialized audit_enabled=0 res=1
[ 0.045014] thermal_sys: Registered thermal governor 'step_wise'
[ 0.045020] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.045071] cpuidle: using governor menu
[ 0.045296] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.045387] ASID allocator initialised with 65536 entries
[ 0.045957] Serial: AMBA PL011 UART driver
[ 0.056868] KASLR disabled due to lack of seed
[ 0.057726] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.057742] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page
[ 0.057749] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages
[ 0.057753] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page
[ 0.057758] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.057762] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page
[ 0.057768] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages
[ 0.057772] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page
[ 0.059355] ACPI: Interpreter disabled.
[ 0.059740] k3-chipinfo 43000014.chipid: Family:AM62X rev:SR1.0 JTAGID[0x0bb7e02f] Detected
[ 0.060919] iommu: Default domain type: Translated
[ 0.060934] iommu: DMA domain TLB invalidation policy: strict mode
[ 0.061260] SCSI subsystem initialized
[ 0.061416] libata version 3.00 loaded.
[ 0.061650] usbcore: registered new interface driver usbfs
[ 0.061681] usbcore: registered new interface driver hub
[ 0.061711] usbcore: registered new device driver usb
[ 0.062230] pps_core: LinuxPPS API ver. 1 registered
[ 0.062235] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.062253] PTP clock support registered
[ 0.062396] EDAC MC: Ver: 3.0.0
[ 0.062887] scmi_core: SCMI protocol bus registered
[ 0.063193] FPGA manager framework
[ 0.063301] Advanced Linux Sound Architecture Driver Initialized.
[ 0.064174] vgaarb: loaded
[ 0.064650] clocksource: Switched to clocksource arch_sys_counter
[ 0.064905] VFS: Disk quotas dquot_6.6.0
[ 0.064942] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.065154] pnp: PnP ACPI: disabled
[ 0.071046] NET: Registered PF_INET protocol family
[ 0.071364] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.072911] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear)
[ 0.072956] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.072972] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.073133] TCP bind hash table entries: 16384 (order: 7, 524288 bytes, linear)
[ 0.073669] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.073867] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear)
[ 0.073929] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear)
[ 0.074147] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.074717] RPC: Registered named UNIX socket transport module.
[ 0.074731] RPC: Registered udp transport module.
[ 0.074735] RPC: Registered tcp transport module.
[ 0.074738] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.074757] PCI: CLS 0 bytes, default 64
[ 0.074989] Unpacking initramfs...
[ 0.081676] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
[ 0.082311] kvm [1]: IPA Size Limit: 40 bits
[ 0.083371] kvm [1]: vgic-v2@100010000
[ 0.083400] kvm [1]: GIC system register CPU interface enabled
[ 0.083440] kvm [1]: vgic interrupt IRQ9
[ 0.083469] kvm [1]: Hyp mode initialized successfully
[ 0.085178] Initialise system trusted keyrings
[ 0.085530] workingset: timestamp_bits=42 max_order=19 bucket_order=0
[ 0.085987] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.086379] NFS: Registering the id_resolver key type
[ 0.086421] Key type id_resolver registered
[ 0.086427] Key type id_legacy registered
[ 0.086453] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 0.086459] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
[ 0.086695] 9p: Installing v9fs 9p2000 file system support
[ 0.118394] Key type asymmetric registered
[ 0.118426] Asymmetric key parser 'x509' registered
[ 0.118588] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[ 0.118598] io scheduler mq-deadline registered
[ 0.118605] io scheduler kyber registered
[ 0.118680] io scheduler bfq registered
[ 0.121683] pinctrl-single 4084000.pinctrl: 34 pins, size 136
[ 0.122367] pinctrl-single f4000.pinctrl: 171 pins, size 684
[ 0.125351] EINJ: ACPI disabled.
[ 0.131388] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.141742] loop: module loaded
[ 0.142648] megasas: 07.719.03.00-rc1
[ 0.147361] tun: Universal TUN/TAP device driver, 1.6
[ 0.148079] thunder_xcv, ver 1.0
[ 0.148119] thunder_bgx, ver 1.0
[ 0.148150] nicpf, ver 1.0
[ 0.148514] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version
[ 0.148522] hns3: Copyright (c) 2017 Huawei Corporation.
[ 0.148581] hclge is initializing
[ 0.148618] e1000: Intel(R) PRO/1000 Network Driver
[ 0.148623] e1000: Copyright (c) 1999-2006 Intel Corporation.
[ 0.148698] e1000e: Intel(R) PRO/1000 Network Driver
[ 0.148705] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 0.148742] igb: Intel(R) Gigabit Ethernet Network Driver
[ 0.148747] igb: Copyright (c) 2007-2014 Intel Corporation.
[ 0.148771] igbvf: Intel(R) Gigabit Virtual Function Network Driver
[ 0.148776] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
[ 0.148960] sky2: driver version 1.30
[ 0.149863] VFIO - User Level meta-driver version: 0.3
[ 0.151531] usbcore: registered new interface driver usb-storage
[ 0.153165] i2c_dev: i2c /dev entries driver
[ 0.154028] ghes_edac: GHES probing device list is empty
[ 0.155773] sdhci: Secure Digital Host Controller Interface driver
[ 0.155794] sdhci: Copyright(c) Pierre Ossman
[ 0.156324] Synopsys Designware Multimedia Card Interface Driver
[ 0.156767] sdhci-pltfm: SDHCI platform and OF driver helper
[ 0.157803] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.158674] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping ....
[ 0.159407] usbcore: registered new interface driver usbhid
[ 0.159419] usbhid: USB HID core driver
[ 0.161375] optee: probing for conduit method.
[ 0.161427] optee: revision 3.18 (4adb4a1f)
[ 0.161789] optee: dynamic shared memory is enabled
[ 0.162058] optee: initialized driver
[ 0.164039] NET: Registered PF_PACKET protocol family
[ 0.164187] 9pnet: Installing 9P2000 support
[ 0.164278] Key type dns_resolver registered
[ 0.173383] registered taskstats version 1
[ 0.173707] Loading compiled-in X.509 certificates
[ 0.186704] ti-sci 44043000.system-controller: ABI: 3.1 (firmware rev 0x0008 '8.6.4--v08.06.04 (Chill Capybar')
[ 0.232093] omap_i2c 4900000.i2c: bus 5 rev0.12 at 100 kHz
[ 0.233900] i2c 0-0030: Fixed dependency cycle(s) with /bus@f0000/i2c@20000000/pmic@30/regulators/buck2
[ 0.234120] omap_i2c 20000000.i2c: bus 0 rev0.12 at 400 kHz
[ 0.235734] omap_i2c 20010000.i2c: bus 1 rev0.12 at 100 kHz
[ 0.236903] omap_i2c 20020000.i2c: bus 2 rev0.12 at 100 kHz
[ 0.238007] omap_i2c 20030000.i2c: bus 3 rev0.12 at 400 kHz
[ 0.238324] ti-sci-intr 4210000.interrupt-controller: Interrupt Router 5 domain created
[ 0.238533] ti-sci-intr bus@f0000:interrupt-controller@a00000: Interrupt Router 3 domain created
[ 0.238813] ti-sci-inta 48000000.interrupt-controller: Interrupt Aggregator domain 28 created
[ 0.239160] ti-udma 485c0100.dma-controller: Number of rings: 82
[ 0.241332] ti-udma 485c0100.dma-controller: Channels: 48 (bchan: 18, tchan: 12, rchan: 18)
[ 0.244160] ti-udma 485c0000.dma-controller: Number of rings: 150
[ 0.248313] ti-udma 485c0000.dma-controller: Channels: 35 (tchan: 20, rchan: 15)
[ 0.251484] 2800000.serial: ttyS2 at MMIO 0x2800000 (irq = 239, base_baud = 3000000) is a 8250
[ 0.251610] printk: console [ttyS2] enabled
[ 0.253450] 2850000.serial: ttyS0 at MMIO 0x2850000 (irq = 240, base_baud = 3000000) is a 8250
[ 0.254903] 2860000.serial: ttyS1 at MMIO 0x2860000 (irq = 241, base_baud = 3000000) is a 8250
[ 0.256368] am65-cpsw-nuss 8000000.ethernet: initializing am65 cpsw nuss version 0x6BA01103, cpsw version 0x6BA81103 Ports: 3 quirks:00000002
[ 0.256788] am65-cpsw-nuss 8000000.ethernet: Use random MAC address
[ 0.263146] am65-cpsw-nuss 8000000.ethernet: initialized cpsw ale version 1.5
[ 0.263166] am65-cpsw-nuss 8000000.ethernet: ALE Table size 512
[ 0.265290] am65-cpsw-nuss 8000000.ethernet: set new flow-id-base 19
[ 0.273988] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 0.274034] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
[ 0.274265] xhci-hcd xhci-hcd.0.auto: USB3 root hub has no ports
[ 0.274276] xhci-hcd xhci-hcd.0.auto: hcc params 0x0258fe6d hci version 0x110 quirks 0x0000000000010010
[ 0.274349] xhci-hcd xhci-hcd.0.auto: irq 244, io mem 0x31100000
[ 0.275290] hub 1-0:1.0: USB hub found
[ 0.275333] hub 1-0:1.0: 1 port detected
[ 0.279844] mmc0: CQHCI version 5.10
[ 0.327391] mmc0: SDHCI controller on fa10000.mmc [fa10000.mmc] using ADMA 64-bit
[ 0.377894] mmc0: Command Queue Engine enabled
[ 0.377940] mmc0: new HS200 MMC card at address 0001
[ 0.378788] mmcblk0: mmc0:0001 TB2916 14.6 GiB
[ 0.380626] mmcblk0: p1 p2
[ 0.381411] mmcblk0boot0: mmc0:0001 TB2916 4.00 MiB
[ 0.382551] mmcblk0boot1: mmc0:0001 TB2916 4.00 MiB
[ 0.383580] mmcblk0rpmb: mmc0:0001 TB2916 4.00 MiB, chardev (241:0)
[ 0.584046] Freeing initrd memory: 15044K
[ 0.739709] sdhci-am654 fa00000.mmc: Got CD GPIO
[ 0.740367] mmc1: CQHCI version 5.10
[ 0.742826] mmc2: CQHCI version 5.10
[ 0.744713] input: gpio-keys as /devices/platform/gpio-keys/input/input0
[ 0.755616] ALSA device list:
[ 0.755644] No soundcards found.
[ 0.783340] mmc2: SDHCI controller on fa20000.mmc [fa20000.mmc] using ADMA 64-bit
[ 0.788848] sdhci-am654 fa20000.mmc: card claims to support voltages below defined range
[ 0.792540] mmc1: SDHCI controller on fa00000.mmc [fa00000.mmc] using ADMA 64-bit
[ 0.793368] Freeing unused kernel memory: 1024K
[ 0.793447] Run /init as init process
[ 0.793454] with arguments:
[ 0.793459] /init
[ 0.793464] with environment:
[ 0.793469] HOME=/
[ 0.793473] TERM=linux
[ 0.801953] mmc2: new high speed SDIO card at address 0001
[ 0.842222] mmc1: new ultra high speed SDR104 SDXC card at address 0001
[ 0.843244] mmcblk1: mmc1:0001 JC2RT 59.6 GiB
[ 0.845360] mmcblk1: p1 p2
[ 2.070715] EXT4-fs (mmcblk1p2): mounted filesystem f36acace-90e2-4832-93b0-c01c822c6e0a with ordered data mode. Quota mode: none.
[ 2.587089] systemd[1]: System time before build time, advancing clock.
[ 2.757431] NET: Registered PF_INET6 protocol family
[ 2.759434] Segment Routing with IPv6
[ 2.759509] In-situ OAM (IOAM) with IPv6
[ 2.813525] systemd[1]: systemd 247.3-7+deb11u1 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified)
[ 2.814805] systemd[1]: Detected architecture arm64.
[ 2.817005] systemd[1]: Set hostname to <BeaglePlay>.
[ 3.374515] systemd[1]: /lib/systemd/system/plymouth-start.service:16: Unit configured to use KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update your service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed.
[ 3.491246] systemd[1]: Queued start job for default target Graphical Interface.
[ 4.524663] random: crng init done
[ 4.594008] systemd[1]: Created slice system-getty.slice.
[ 4.596798] systemd[1]: Created slice system-modprobe.slice.
[ 4.598528] systemd[1]: Created slice system-serial\x2dgetty.slice.
[ 4.599832] systemd[1]: Created slice User and Session Slice.
[ 4.600219] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 4.600400] systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped.
[ 4.600816] systemd[1]: Reached target Remote File Systems.
[ 4.600887] systemd[1]: Reached target Slices.
[ 4.600964] systemd[1]: Reached target Swap.
[ 4.602480] systemd[1]: Listening on Syslog Socket.
[ 4.602981] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 4.603248] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ 4.603983] systemd[1]: Listening on Journal Audit Socket.
[ 4.604428] systemd[1]: Listening on Journal Socket (/dev/log).
[ 4.605038] systemd[1]: Listening on Journal Socket.
[ 4.605750] systemd[1]: Listening on Network Service Netlink Socket.
[ 4.606272] systemd[1]: Listening on udev Control Socket.
[ 4.606586] systemd[1]: Listening on udev Kernel Socket.
[ 4.611201] systemd[1]: Mounting Huge Pages File System...
[ 4.616698] systemd[1]: Mounting POSIX Message Queue File System...
[ 4.622686] systemd[1]: Mounting /sys/kernel/debug...
[ 4.623516] systemd[1]: Condition check resulted in Kernel Trace File System being skipped.
[ 4.630462] systemd[1]: Starting Set the console keyboard layout...
[ 4.636488] systemd[1]: Starting Create list of static device nodes for the current kernel...
[ 4.642984] systemd[1]: Starting Load Kernel Module configfs...
[ 4.649492] systemd[1]: Starting Load Kernel Module drm...
[ 4.655995] systemd[1]: Starting Load Kernel Module fuse...
[ 4.660132] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[ 4.670285] systemd[1]: Starting File System Check on Root Device...
[ 4.680298] systemd[1]: Starting Journal Service...
[ 4.702213] systemd[1]: Starting Load Kernel Modules...
[ 4.709595] systemd[1]: Starting Coldplug All udev Devices...
[ 4.717351] fuse: init (API version 7.38)
[ 4.725280] systemd[1]: Mounted Huge Pages File System.
[ 4.727170] systemd[1]: Mounted POSIX Message Queue File System.
[ 4.729156] systemd[1]: Mounted /sys/kernel/debug.
[ 4.733453] systemd[1]: Finished Set the console keyboard layout.
[ 4.738407] systemd[1]: Finished Create list of static device nodes for the current kernel.
[ 4.741281] systemd[1]: modprobe@configfs.service: Succeeded.
[ 4.742725] systemd[1]: Finished Load Kernel Module configfs.
[ 4.745666] systemd[1]: modprobe@fuse.service: Succeeded.
[ 4.747264] systemd[1]: Finished Load Kernel Module fuse.
[ 4.785559] systemd[1]: Mounting FUSE Control File System...
[ 4.791245] systemd[1]: Mounting Kernel Configuration File System...
[ 4.798333] systemd[1]: Started File System Check Daemon to report status.
[ 4.810081] systemd[1]: Finished Load Kernel Modules.
[ 4.811524] systemd[1]: Mounted FUSE Control File System.
[ 4.813147] systemd[1]: Mounted Kernel Configuration File System.
[ 4.819380] systemd[1]: Starting Apply Kernel Variables...
[ 4.871784] systemd[1]: modprobe@drm.service: Succeeded.
[ 4.873220] systemd[1]: Finished Load Kernel Module drm.
[ 4.875855] systemd[1]: Finished File System Check on Root Device.
[ 4.879069] systemd[1]: Finished Apply Kernel Variables.
[ 4.902980] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 4.903819] systemd[1]: Started Journal Service.
[ 4.955328] EXT4-fs (mmcblk1p2): re-mounted f36acace-90e2-4832-93b0-c01c822c6e0a. Quota mode: none.
[ 5.075724] systemd-journald[250]: Received client request to flush runtime journal.
[ 5.082111] systemd-journald[250]: File /var/log/journal/1e24495650214bd8837a3cbf32addb7a/system.journal corrupted or uncleanly shut down, renaming and replacing.
[ 6.208937] am65-cpsw-nuss 8000000.ethernet eth0: PHY [gpio-0:00] driver [RTL8211F-VD Gigabit Ethernet] (irq=POLL)
[ 6.208978] am65-cpsw-nuss 8000000.ethernet eth0: configuring for phy/rgmii-rxid link mode
[ 6.518679] at24 0-0050: supply vcc not found, using dummy regulator
[ 6.542509] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write
[ 6.545261] bq32k 0-0068: Oscillator Failure. Check RTC battery.
[ 6.546371] bq32k 0-0068: registered as rtc0
[ 6.547033] bq32k 0-0068: hctosys: unable to read the hardware clock
[ 7.555091] VDD_CORE: Bringing 750000uV into 850000-850000uV
[ 7.606975] input: tps65219-pwrbutton as /devices/platform/bus@f0000/20000000.i2c/i2c-0/0-0030/tps65219-pwrbutton.3.auto/input/input1
[ 7.726598] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 7.746430] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 7.817052] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid
[ 8.285478] am65-cpsw-nuss 8000000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx
[ 8.285557] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 8.548628] systemd-journald[250]: Failed to read journal file /var/log/journal/1e24495650214bd8837a3cbf32addb7a/user-1000.journal for rotation, trying to move it out of the way: Text file busy
[ 8.874393] Adding 2097148k swap on /var/swap. Priority:-2 extents:16 across:47161340k SS
[ 9.006572] Mass Storage Function, version: 2009/09/11
[ 9.006610] LUN: removable file: (no medium)
[ 9.253261] wlcore: wl18xx HW: 183x or 180x, PG 2.2 (ROM 0x11)
[ 9.254426] wlcore: WARNING Detected unconfigured mac address in nvs, derive from fuse instead.
[ 9.254460] wlcore: WARNING This default nvs file can be removed from the file system
[ 9.257602] wlcore: loaded
[ 9.934325] wlcore: using inverted interrupt logic: 2
[ 9.987457] wlcore: PHY firmware version: Rev 8.2.0.0.243
[ 10.080388] wlcore: firmware booted (Rev 8.9.0.0.83)
[ 10.150502] IPv6: ADDRCONF(NETDEV_CHANGE): SoftAp0: link becomes ready
[ 12.545377] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 12.559711] Bridge firewalling registered
[ 14.038855] configfs-gadget.g_multi gadget.0: HOST MAC 1c:ba:8c:a2:ed:6a
[ 14.038895] configfs-gadget.g_multi gadget.0: MAC 1c:ba:8c:a2:ed:6b
[ 14.044066] configfs-gadget.g_multi gadget.0: HOST MAC 1c:ba:8c:a2:ed:6c
[ 14.044106] configfs-gadget.g_multi gadget.0: MAC 1c:ba:8c:a2:ed:6d
[ 21.398815] memfd_create() without MFD_EXEC nor MFD_NOEXEC_SEAL, pid=825 'systemd'
debian@BeaglePlay:~$ uname -a
Linux BeaglePlay 6.3.0-rc1-00003-gce40aed1cb6a #kernel_patch_verify_build SMP PREEMPT Thu Mar 16 08:23:09 CDT 2 aarch64 GNU/Linux
debian@BeaglePlay:~$ ls
Desktop Image Public examples rtctest
Documents Music Templates k3-am625-beagleplay.dtb setdate
Downloads Pictures Videos modules.tar.xz watchdog-test
debian@BeaglePlay:~$ cat /sys/class/regulator/regulator.
regulator.0/ regulator.11/ regulator.3/ regulator.6/ regulator.9/
regulator.1/ regulator.12/ regulator.4/ regulator.7/
regulator.10/ regulator.2/ regulator.5/ regulator.8/
debian@BeaglePlay:~$ cat /sys/class/regulator/regulator.*/name
regulator-dummy
vsys_5v0
VDDA_0V85
VDDA_1V8
VDD_2V5
vdd_3v3
wlan_en
vdd_3v3_sd
sd_hs200_switch
VDD_CORE
VDD_1V8
VDD_1V2
VDD_SD_3V3
debian@BeaglePlay:~$ cat /proc/interrupts
CPU0 CPU1 CPU2 CPU3
9: 0 0 0 0 GICv3 25 Level vgic
11: 6747 7604 8146 6710 GICv3 30 Level arch_timer
12: 0 0 0 0 GICv3 27 Level kvm guest vtimer
14: 0 0 0 0 GICv3 23 Level arm-pmu
15: 2497 0 0 0 GICv3 66 Level 4d000000.mailbox thr_012
24: 0 0 0 0 GICv3 139 Level 4900000.i2c
25: 112 0 0 0 GICv3 193 Level 20000000.i2c
26: 0 0 0 0 GICv3 194 Level 20010000.i2c
27: 0 0 0 0 GICv3 195 Level 20020000.i2c
28: 0 0 0 0 GICv3 196 Level 20030000.i2c
117: 77 0 0 0 MSI-INTA 1970707 Level 8000000.ethernet-tx0
207: 10 0 0 0 MSI-INTA 1971731 Level 8000000.ethernet
239: 969 0 0 0 GICv3 210 Level 2800000.serial
243: 0 0 0 0 GICv3 220 Level dwc3
244: 0 0 0 0 GICv3 258 Level xhci-hcd:usb1
245: 866 0 0 0 GICv3 165 Level mmc0
296: 0 0 0 0 GPIO 18 Edge -davinci_gpio User Key
319: 36 0 0 0 GPIO 41 Edge -davinci_gpio wl18xx
419: 0 0 0 0 GPIO 48 Edge -davinci_gpio fa00000.mmc cd
459: 18981 0 0 0 GICv3 115 Level mmc1
460: 3548 0 0 0 GICv3 114 Level mmc2
461: 0 0 0 0 GICv3 206 Level 20120000.spi
462: 0 0 0 0 GICv3 256 Level tps65219_irq
463: 0 0 0 0 tps65219_irq 0 Edge LDO3_SCG
464: 0 0 0 0 tps65219_irq 1 Edge LDO3_OC
465: 0 0 0 0 tps65219_irq 2 Edge LDO3_UV
466: 0 0 0 0 tps65219_irq 3 Edge LDO4_SCG
467: 0 0 0 0 tps65219_irq 4 Edge LDO4_OC
468: 0 0 0 0 tps65219_irq 5 Edge LDO4_UV
469: 0 0 0 0 tps65219_irq 6 Edge LDO1_SCG
470: 0 0 0 0 tps65219_irq 7 Edge LDO1_OC
471: 0 0 0 0 tps65219_irq 8 Edge LDO1_UV
472: 0 0 0 0 tps65219_irq 9 Edge LDO2_SCG
473: 0 0 0 0 tps65219_irq 10 Edge LDO2_OC
474: 0 0 0 0 tps65219_irq 11 Edge LDO2_UV
475: 0 0 0 0 tps65219_irq 12 Edge BUCK3_SCG
476: 0 0 0 0 tps65219_irq 13 Edge BUCK3_OC
477: 0 0 0 0 tps65219_irq 14 Edge BUCK3_NEG_OC
478: 0 0 0 0 tps65219_irq 15 Edge BUCK3_UV
479: 0 0 0 0 tps65219_irq 16 Edge BUCK1_SCG
480: 0 0 0 0 tps65219_irq 17 Edge BUCK1_OC
481: 0 0 0 0 tps65219_irq 18 Edge BUCK1_NEG_OC
482: 0 0 0 0 tps65219_irq 19 Edge BUCK1_UV
483: 0 0 0 0 tps65219_irq 20 Edge BUCK2_SCG
484: 0 0 0 0 tps65219_irq 21 Edge BUCK2_OC
485: 0 0 0 0 tps65219_irq 22 Edge BUCK2_NEG_OC
486: 0 0 0 0 tps65219_irq 23 Edge BUCK2_UV
487: 0 0 0 0 tps65219_irq 32 Edge BUCK1_RV
488: 0 0 0 0 tps65219_irq 33 Edge BUCK2_RV
489: 0 0 0 0 tps65219_irq 34 Edge BUCK3_RV
490: 0 0 0 0 tps65219_irq 35 Edge LDO1_RV
491: 0 0 0 0 tps65219_irq 36 Edge LDO2_RV
492: 0 0 0 0 tps65219_irq 37 Edge LDO3_RV
493: 0 0 0 0 tps65219_irq 38 Edge LDO4_RV
494: 0 0 0 0 tps65219_irq 39 Edge BUCK1_RV_SD
495: 0 0 0 0 tps65219_irq 40 Edge BUCK2_RV_SD
496: 0 0 0 0 tps65219_irq 41 Edge BUCK3_RV_SD
497: 0 0 0 0 tps65219_irq 42 Edge LDO1_RV_SD
498: 0 0 0 0 tps65219_irq 43 Edge LDO2_RV_SD
499: 0 0 0 0 tps65219_irq 44 Edge LDO3_RV_SD
500: 0 0 0 0 tps65219_irq 45 Edge LDO4_RV_SD
501: 0 0 0 0 tps65219_irq 46 Edge TIMEOUT
502: 0 0 0 0 tps65219_irq 24 Edge SENSOR_3_WARM
503: 0 0 0 0 tps65219_irq 25 Edge SENSOR_2_WARM
504: 0 0 0 0 tps65219_irq 26 Edge SENSOR_1_WARM
505: 0 0 0 0 tps65219_irq 27 Edge SENSOR_0_WARM
506: 0 0 0 0 tps65219_irq 28 Edge SENSOR_3_HOT
507: 0 0 0 0 tps65219_irq 29 Edge SENSOR_2_HOT
508: 0 0 0 0 tps65219_irq 30 Edge SENSOR_1_HOT
509: 0 0 0 0 tps65219_irq 31 Edge SENSOR_0_HOT
510: 0 0 0 0 tps65219_irq 47 Edge tps65219-pwrbutton.3.auto
511: 0 0 0 0 tps65219_irq 48 Edge tps65219-pwrbutton.3.auto
IPI0: 760 1579 1519 1918 Rescheduling interrupts
IPI1: 4082 6584 5661 7574 Function call interrupts
IPI2: 0 0 0 0 CPU stop interrupts
IPI3: 0 0 0 0 CPU stop (for crash dump) interrupts
IPI4: 0 0 0 0 Timer broadcast interrupts
IPI5: 165 139 183 116 IRQ work interrupts
IPI6: 0 0 0 0 CPU wake-up interrupts
Err: 0
debian@BeaglePlay:~$ gpio
gpiodetect gpiofind gpioget gpioinfo gpiomon gpioset
debian@BeaglePlay:~$ gpio
gpiodetect gpiofind gpioget gpioinfo gpiomon gpioset
debian@BeaglePlay:~$ gpioinfo
gpiochip0 - 24 lines:
line 0: unnamed unused input active-high
line 1: unnamed unused input active-high
line 2: unnamed unused input active-high
line 3: unnamed unused input active-high
line 4: unnamed unused input active-high
line 5: unnamed unused input active-high
line 6: unnamed unused input active-high
line 7: unnamed unused input active-high
line 8: unnamed unused input active-high
line 9: unnamed unused input active-high
line 10: unnamed unused input active-high
line 11: unnamed unused input active-high
line 12: unnamed unused input active-high
line 13: unnamed unused input active-high
line 14: unnamed unused input active-high
line 15: unnamed unused input active-high
line 16: unnamed unused input active-high
line 17: unnamed unused input active-high
line 18: unnamed unused input active-high
line 19: unnamed unused input active-high
line 20: unnamed unused input active-high
line 21: unnamed unused input active-high
line 22: unnamed unused input active-high
line 23: unnamed unused input active-high
gpiochip1 - 87 lines:
line 0: "BL_EN_3V3" unused input active-high
line 1: "SPE_PO_EN" unused input active-high
line 2: "RTC_INT" unused input active-high
line 3: "USR0" ":heartbeat" output active-high [used]
line 4: "USR1" ":disk-activity" output active-high [used]
line 5: "USR2" ":cpu" output active-high [used]
line 6: "USR3" ":lan" output active-high [used]
line 7: unnamed unused input active-high
line 8: unnamed unused input active-high
line 9: "USR4" ":wlan" output active-high [used]
line 10: "EEPROM_WP" unused input active-high
line 11: "CSI2_CAMERA_GPIO1" unused input active-high
line 12: "CSI2_CAMERA_GPIO2" unused input active-high
line 13: "CC1352P7_BOOT" unused input active-high
line 14: "CC1352P7_RSTN" unused input active-high
line 15: unnamed unused input active-high
line 16: unnamed unused input active-high
line 17: unnamed unused input active-high
line 18: "USR_BUTTON" "User Key" input active-low [used]
line 19: unnamed unused input active-high
line 20: unnamed unused input active-high
line 21: unnamed unused input active-high
line 22: unnamed unused input active-high
line 23: unnamed unused input active-high
line 24: unnamed unused input active-high
line 25: unnamed unused input active-high
line 26: unnamed unused input active-high
line 27: unnamed unused input active-high
line 28: unnamed unused input active-high
line 29: unnamed unused input active-high
line 30: unnamed unused input active-high
line 31: unnamed unused input active-high
line 32: unnamed unused input active-high
line 33: unnamed unused input active-high
line 34: unnamed unused input active-high
line 35: unnamed unused input active-high
line 36: "HDMI_INT" unused input active-high
line 37: unnamed unused input active-high
line 38: "VDD_WLAN_EN" "regulator-3" output active-high [used]
line 39: unnamed unused input active-high
line 40: unnamed unused input active-high
line 41: "WL_IRQ" unused input active-high
line 42: "GBE_INTN" unused input active-high
line 43: unnamed unused input active-high
line 44: unnamed unused input active-high
line 45: unnamed unused input active-high
line 46: unnamed unused input active-high
line 47: unnamed unused input active-high
line 48: unnamed unused input active-high
line 49: unnamed unused input active-high
line 50: unnamed unused input active-high
line 51: unnamed unused input active-high
line 52: unnamed unused input active-high
line 53: unnamed unused input active-high
line 54: unnamed unused input active-high
line 55: unnamed unused input active-high
line 56: unnamed unused input active-high
line 57: unnamed unused input active-high
line 58: unnamed unused input active-high
line 59: unnamed unused input active-high
line 60: unnamed unused input active-high
line 61: unnamed unused input active-high
line 62: unnamed unused input active-high
line 63: unnamed unused input active-high
line 64: unnamed unused input active-high
line 65: unnamed unused input active-high
line 66: unnamed unused input active-high
line 67: unnamed unused input active-high
line 68: unnamed unused input active-high
line 69: unnamed unused input active-high
line 70: unnamed unused input active-high
line 71: unnamed unused input active-high
line 72: unnamed unused input active-high
line 73: unnamed unused input active-high
line 74: unnamed unused input active-high
line 75: unnamed unused input active-high
line 76: unnamed unused input active-high
line 77: unnamed unused input active-high
line 78: unnamed unused input active-high
line 79: unnamed unused input active-high
line 80: unnamed unused input active-high
line 81: unnamed unused input active-high
line 82: unnamed unused input active-high
line 83: unnamed unused input active-high
line 84: unnamed unused input active-high
line 85: "BITBANG_MDIO_DATA" "mdio" input active-high [used]
line 86: "BITBANG_MDIO_CLK" "mdio" output active-high [used]
gpiochip2 - 88 lines:
line 0: unnamed unused input active-high
line 1: unnamed unused input active-high
line 2: unnamed unused input active-high
line 3: unnamed unused input active-high
line 4: unnamed unused input active-high
line 5: "SPE_RSTN" "PHY reset" output active-low [used]
line 6: "SPE_INTN" unused input active-high
line 7: "MIKROBUS_GPIO1_7" unused input active-high
line 8: "MIKROBUS_GPIO1_8" unused input active-high
line 9: "MIKROBUS_GPIO1_9" unused input active-high
line 10: "MIKROBUS_GPIO1_10" unused input active-high
line 11: "MIKROBUS_GPIO1_11" unused input active-high
line 12: "MIKROBUS_GPIO1_12" unused input active-high
line 13: "MIKROBUS_W1_GPIO0" unused input active-high
line 14: "MIKROBUS_GPIO1_14" unused input active-high
line 15: unnamed unused input active-high
line 16: unnamed unused input active-high
line 17: unnamed unused input active-high
line 18: unnamed unused input active-high
line 19: "VDD_3V3_SD" "regulator-4" output active-high [used]
line 20: unnamed unused input active-high
line 21: unnamed unused input active-high
line 22: "MIKROBUS_GPIO1_22" unused input active-high
line 23: "MIKROBUS_GPIO1_23" unused input active-high
line 24: "MIKROBUS_GPIO1_24" unused input active-high
line 25: "MIKROBUS_GPIO1_25" unused input active-high
line 26: unnamed unused input active-high
line 27: unnamed unused input active-high
line 28: unnamed unused input active-high
line 29: unnamed unused input active-high
line 30: unnamed unused input active-high
line 31: unnamed unused input active-high
line 32: unnamed unused input active-high
line 33: unnamed unused input active-high
line 34: unnamed unused input active-high
line 35: unnamed unused input active-high
line 36: unnamed unused input active-high
line 37: unnamed unused input active-high
line 38: unnamed unused input active-high
line 39: unnamed unused input active-high
line 40: unnamed unused input active-high
line 41: unnamed unused input active-high
line 42: unnamed unused input active-high
line 43: unnamed unused input active-high
line 44: unnamed unused input active-high
line 45: unnamed unused input active-high
line 46: unnamed unused input active-high
line 47: unnamed unused input active-high
line 48: "SD_CD" "cd" input active-low [used]
line 49: "SD_VOLT_SEL" "sd_hs200_switch" output active-high [used]
line 50: unnamed unused input active-high
line 51: unnamed unused input active-high
line 52: unnamed unused input active-high
line 53: unnamed unused input active-high
line 54: unnamed unused input active-high
line 55: unnamed unused input active-high
line 56: unnamed unused input active-high
line 57: unnamed unused input active-high
line 58: unnamed unused input active-high
line 59: unnamed unused input active-high
line 60: unnamed unused input active-high
line 61: unnamed unused input active-high
line 62: unnamed unused input active-high
line 63: unnamed unused input active-high
line 64: unnamed unused input active-high
line 65: unnamed unused input active-high
line 66: unnamed unused input active-high
line 67: unnamed unused input active-high
line 68: unnamed unused input active-high
line 69: unnamed unused input active-high
line 70: unnamed unused input active-high
line 71: unnamed unused input active-high
line 72: unnamed unused input active-high
line 73: unnamed unused input active-high
line 74: unnamed unused input active-high
line 75: unnamed unused input active-high
line 76: unnamed unused input active-high
line 77: unnamed unused input active-high
line 78: unnamed unused input active-high
line 79: unnamed unused input active-high
line 80: unnamed unused input active-high
line 81: unnamed unused input active-high
line 82: unnamed unused input active-high
line 83: unnamed unused input active-high
line 84: unnamed unused input active-high
line 85: unnamed unused input active-high
line 86: unnamed unused input active-high
line 87: unnamed unused input active-high
debian@BeaglePlay:~$ uname -a
Linux BeaglePlay 6.3.0-rc1-00003-gce40aed1cb6a #kernel_patch_verify_build SMP PREEMPT Thu Mar 16 08:23:09 CDT 2 aarch64 GNU/Linux
debian@BeaglePlay:~$
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment