Skip to content

Instantly share code, notes, and snippets.

@nmenon

nmenon/am64-evm Secret

Last active April 14, 2023 07:40
Show Gist options
  • Star 0 You must be signed in to star a gist
  • Fork 0 You must be signed in to fork a gist
  • Save nmenon/6b09f55251225d3f3cce076c32a33bba to your computer and use it in GitHub Desktop.
Save nmenon/6b09f55251225d3f3cce076c32a33bba to your computer and use it in GitHub Desktop.
Download ZIP
am64-sync-dts
Raw
am64-evm
U-Boot SPL 2023.04-00841-g41bc8809124f (Apr 14 2023 - 00:22:57 -0500)
SYSFW ABI: 3.1 (firmware rev 0x0008 '8.6.4--v08.06.04 (Chill Capybar')
SPL initial stack usage: 13360 bytes
Trying to boot from MMC2
spl_load_fit_image: Skip load 'dm': image size is 0!
Loading Environment from MMC... *** Warning - No MMC card found, using default environment
Starting ATF on ARM64 core...
NOTICE: BL31: v2.8(release):v2.8-745-ga1c924df6d31
NOTICE: BL31: Built : 00:22:56, Apr 14 2023
I/TC:
I/TC: OP-TEE version: 3.21.0-rc1-1-gb031393cd781 (gcc version 12.2.1 20221205 (Arm GNU Toolchain 12.2.Rel1 (Build arm-12.24))) #1 Fri Apr 14 05:22:57 UTC 2023 aarch64
I/TC: WARNING: This OP-TEE configuration might be insecure!
I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html
I/TC: Primary CPU initializing
I/TC: SYSFW ABI: 3.1 (firmware rev 0x0008 '8.6.4--v08.06.04 (Chill Capybar')
I/TC: HUK Initialized
I/TC: Activated SA2UL device
I/TC: Fixing SA2UL firewall owner for GP device
I/TC: Enabled firewalls for SA2UL TRNG device
I/TC: SA2UL TRNG initialized
I/TC: SA2UL Drivers initialized
I/TC: Primary CPU switching to normal world boot
U-Boot SPL 2023.04-00841-g41bc8809124f (Apr 14 2023 - 00:23:00 -0500)
SYSFW ABI: 3.1 (firmware rev 0x0008 '8.6.4--v08.06.04 (Chill Capybar')
Trying to boot from MMC2
U-Boot 2023.04-00841-g41bc8809124f (Apr 14 2023 - 00:23:00 -0500)
SoC: AM64X SR1.0 GP
Model: Texas Instruments AM642 EVM
Board: AM64-GPEVM rev E2
DRAM: 2 GiB
Core: 58 devices, 27 uclasses, devicetree: separate
MMC: mmc@fa10000: 0, mmc@fa00000: 1
Loading Environment from MMC... *** Warning - bad CRC, using default environment
In: serial@2800000
Out: serial@2800000
Err: serial@2800000
Net: eth0: ethernet@8000000port@1
Hit any key to stop autoboot: 0
=> dhcp
link up on port 1, speed 100, full duplex
BOOTP broadcast 1
BOOTP broadcast 2
BOOTP broadcast 3
DHCP client bound to address 192.168.0.51 (1036 ms)
*** Warning: no boot file name; using 'C0A80033.img'
Using ethernet@8000000port@1 device
TFTP from server 192.168.0.1; our IP address is 192.168.0.51
Filename 'C0A80033.img'.
Load address: 0x82000000
Loading: *
TFTP error: 'File not found' (1)
Not retrying...
am65_cpsw_nuss_port ethernet@8000000port@1: RX dma free_pkt failed -22
=> mmc dev
switch to partitions #0, OK
mmc0(part 0) is current device
=> mmc info
Device: mmc@fa10000
Manufacturer ID: 13
OEM: 4e
Name: S0J56X
Bus Speed: 200000000
Mode: HS200 (200MHz)
Rd Block Len: 512
MMC version 5.1
High Capacity: Yes
Capacity: 14.8 GiB
Bus Width: 8-bit
Erase Group Size: 512 KiB
HC WP Group Size: 8 MiB
User Capacity: 14.8 GiB WRREL
Boot Capacity: 31.5 MiB ENH
RPMB Capacity: 4 MiB ENH
Boot area 0 is not write protected
Boot area 1 is not write protected
=> mmc dev 1
switch to partitions #0, OK
mmc1 is current device
=> mmc info
Device: mmc@fa00000
Manufacturer ID: 3
OEM: 5344
Name: SB16G
Bus Speed: 50000000
Mode: SD High Speed (50MHz)
Rd Block Len: 512
SD version 3.0
High Capacity: Yes
Capacity: 14.8 GiB
Bus Width: 4-bit
Erase Group Size: 512 Bytes
=> boot
switch to partitions #0, OK
mmc1 is current device
SD/MMC found on device 1
Failed to load 'boot.scr'
Failed to load 'uEnv.txt'
21719552 bytes read in 930 ms (22.3 MiB/s)
42799 bytes read in 32 ms (1.3 MiB/s)
## Flattened Device Tree blob at 88000000
Booting using the fdt blob at 0x88000000
Working FDT set to 88000000
Loading Device Tree to 000000008fff2000, end 000000008ffff72e ... OK
Working FDT set to 8fff2000
Starting kernel ...
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[ 0.000000] Linux version 6.3.0-rc6-next-20230413-00011-gf90367ade853 (nmenon@uda0133052) (Ubuntu clang version 17.0.0 (++20230329031506+d4879d769095-1~exp1~20230329151616.834), Ubuntu LLD 17.0.0) #kernel_patch_verify_build SMP PREEMPT Thu Apr 13 22:54:01 CDT 2
[ 0.000000] Machine model: Texas Instruments AM642 EVM
[ 0.000000] earlycon: ns16550a0 at MMIO32 0x0000000002800000 (options '')
[ 0.000000] printk: bootconsole [ns16550a0] enabled
[ 0.000000] efi: UEFI not found.
[ 0.000000] OF: reserved mem: 0x000000009e800000..0x000000009fffffff (24576 KiB) nomap non-reusable optee@9e800000
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a0000000, size 1 MiB
[ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@a0000000, compatible id shared-dma-pool
[ 0.000000] OF: reserved mem: 0x00000000a0000000..0x00000000a00fffff (1024 KiB) nomap non-reusable r5f-dma-memory@a0000000
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a0100000, size 15 MiB
[ 0.000000] OF: reserved mem: initialized node r5f-memory@a0100000, compatible id shared-dma-pool
[ 0.000000] OF: reserved mem: 0x00000000a0100000..0x00000000a0ffffff (15360 KiB) nomap non-reusable r5f-memory@a0100000
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a1000000, size 1 MiB
[ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@a1000000, compatible id shared-dma-pool
[ 0.000000] OF: reserved mem: 0x00000000a1000000..0x00000000a10fffff (1024 KiB) nomap non-reusable r5f-dma-memory@a1000000
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a1100000, size 15 MiB
[ 0.000000] OF: reserved mem: initialized node r5f-memory@a1100000, compatible id shared-dma-pool
[ 0.000000] OF: reserved mem: 0x00000000a1100000..0x00000000a1ffffff (15360 KiB) nomap non-reusable r5f-memory@a1100000
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a2000000, size 1 MiB
[ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@a2000000, compatible id shared-dma-pool
[ 0.000000] OF: reserved mem: 0x00000000a2000000..0x00000000a20fffff (1024 KiB) nomap non-reusable r5f-dma-memory@a2000000
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a2100000, size 15 MiB
[ 0.000000] OF: reserved mem: initialized node r5f-memory@a2100000, compatible id shared-dma-pool
[ 0.000000] OF: reserved mem: 0x00000000a2100000..0x00000000a2ffffff (15360 KiB) nomap non-reusable r5f-memory@a2100000
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a3000000, size 1 MiB
[ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@a3000000, compatible id shared-dma-pool
[ 0.000000] OF: reserved mem: 0x00000000a3000000..0x00000000a30fffff (1024 KiB) nomap non-reusable r5f-dma-memory@a3000000
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a3100000, size 15 MiB
[ 0.000000] OF: reserved mem: initialized node r5f-memory@a3100000, compatible id shared-dma-pool
[ 0.000000] OF: reserved mem: 0x00000000a3100000..0x00000000a3ffffff (15360 KiB) nomap non-reusable r5f-memory@a3100000
[ 0.000000] OF: reserved mem: 0x00000000a5000000..0x00000000a57fffff (8192 KiB) nomap non-reusable ipc-memories@a5000000
[ 0.000000] NUMA: No NUMA configuration found
[ 0.000000] NUMA: Faking a node at [mem 0x0000000080000000-0x00000000ffffffff]
[ 0.000000] NUMA: NODE_DATA [mem 0xffbf59c0-0xffbf7fff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff]
[ 0.000000] DMA32 empty
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000080000000-0x000000009e7fffff]
[ 0.000000] node 0: [mem 0x000000009e800000-0x00000000a3ffffff]
[ 0.000000] node 0: [mem 0x00000000a4000000-0x00000000a4ffffff]
[ 0.000000] node 0: [mem 0x00000000a5000000-0x00000000a57fffff]
[ 0.000000] node 0: [mem 0x00000000a5800000-0x00000000ffffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x00000000ffffffff]
[ 0.000000] cma: Reserved 32 MiB at 0x00000000fba00000
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.1 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: Trusted OS migration not required
[ 0.000000] psci: SMC Calling Convention v1.2
[ 0.000000] percpu: Embedded 22 pages/cpu s49448 r8192 d32472 u90112
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] CPU features: detected: GIC system register CPU interface
[ 0.000000] CPU features: detected: ARM erratum 845719
[ 0.000000] alternatives: applying boot alternatives
[ 0.000000] Kernel command line: console=ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000 root=PARTUUID=1a3b1d0c-02 rw rootfstype=ext4 rootwait
[ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.000000] Fallback order for Node 0: 0
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 516096
[ 0.000000] Policy zone: DMA
[ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off
[ 0.000000] Memory: 1904060K/2097152K available (13952K kernel code, 1370K rwdata, 4740K rodata, 1024K init, 542K bss, 160324K reserved, 32768K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000] rcu: RCU event tracing is enabled.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=2.
[ 0.000000] Trampoline variant of Tasks RCU enabled.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[ 0.000000] GICv3: 256 SPIs implemented
[ 0.000000] GICv3: 0 Extended SPIs implemented
[ 0.000000] Root IRQ handler: gic_handle_irq
[ 0.000000] GICv3: GICv3 features: 16 PPIs
[ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000001840000
[ 0.000000] ITS [mem 0x01820000-0x0182ffff]
[ 0.000000] GIC: enabling workaround for ITS: Socionext Synquacer pre-ITS
[ 0.000000] ITS@0x0000000001820000: Devices Table too large, reduce ids 20->19
[ 0.000000] ITS@0x0000000001820000: allocated 524288 Devices @80800000 (flat, esz 8, psz 64K, shr 0)
[ 0.000000] ITS: using cache flushing for cmd queue
[ 0.000000] GICv3: using LPI property table @0x0000000080030000
[ 0.000000] GIC: using cache flushing for LPI property table
[ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x0000000080040000
[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.000000] arch_timer: cp15 timer(s) running at 200.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0x3ffffffffffffff max_cycles: 0x2e2049d3e8, max_idle_ns: 440795210634 ns
[ 0.000001] sched_clock: 58 bits at 200MHz, resolution 5ns, wraps every 4398046511102ns
[ 0.008588] Console: colour dummy device 80x25
[ 0.013224] Calibrating delay loop (skipped), value calculated using timer frequency.. 400.00 BogoMIPS (lpj=800000)
[ 0.023904] pid_max: default: 32768 minimum: 301
[ 0.028691] LSM: initializing lsm=capability,integrity
[ 0.034084] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[ 0.041666] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[ 0.051845] RCU Tasks: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1.
[ 0.059218] RCU Tasks Trace: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1.
[ 0.067197] rcu: Hierarchical SRCU implementation.
[ 0.072117] rcu: Max phase no-delay instances is 1000.
[ 0.077776] Platform MSI: msi-controller@1820000 domain created
[ 0.084116] PCI/MSI: /bus@f4000/interrupt-controller@1800000/msi-controller@1820000 domain created
[ 0.093984] EFI services will not be available.
[ 0.098948] smp: Bringing up secondary CPUs ...
I/TC: Secondary CPU 1 initializing
I/TC: Secondary CPU 1 switching to normal world boot
[ 0.112614] Detected VIPT I-cache on CPU1
[ 0.112717] GICv3: CPU1: found redistributor 1 region 0:0x0000000001860000
[ 0.112737] GICv3: CPU1: using allocated LPI pending table @0x0000000080050000
[ 0.112799] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
[ 0.112925] smp: Brought up 1 node, 2 CPUs
[ 0.142304] SMP: Total of 2 processors activated.
[ 0.147114] CPU features: detected: 32-bit EL0 Support
[ 0.152380] CPU features: detected: 32-bit EL1 Support
[ 0.157637] CPU features: detected: CRC32 instructions
[ 0.162960] CPU: All CPU(s) started at EL2
[ 0.167180] alternatives: applying system-wide alternatives
[ 0.175383] devtmpfs: initialized
[ 0.188252] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.198273] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
[ 0.206602] pinctrl core: initialized pinctrl subsystem
[ 0.213078] DMI not present or invalid.
[ 0.217796] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.225049] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations
[ 0.232511] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.240637] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.248831] audit: initializing netlink subsys (disabled)
[ 0.254671] audit: type=2000 audit(0.160:1): state=initialized audit_enabled=0 res=1
[ 0.255324] thermal_sys: Registered thermal governor 'step_wise'
[ 0.262620] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.268823] cpuidle: using governor menu
[ 0.279758] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.286772] ASID allocator initialised with 65536 entries
[ 0.293099] Serial: AMBA PL011 UART driver
[ 0.312736] KASLR disabled due to lack of seed
[ 0.318414] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.325396] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page
[ 0.331805] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages
[ 0.338740] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page
[ 0.345144] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.352078] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page
[ 0.358483] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages
[ 0.365418] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page
[ 0.374092] ACPI: Interpreter disabled.
[ 0.378579] k3-chipinfo 43000014.chipid: Family:AM64X rev:SR1.0 JTAGID[0x0bb3802f] Detected
[ 0.389544] iommu: Default domain type: Translated
[ 0.394578] iommu: DMA domain TLB invalidation policy: strict mode
[ 0.401384] SCSI subsystem initialized
[ 0.405770] usbcore: registered new interface driver usbfs
[ 0.411428] usbcore: registered new interface driver hub
[ 0.416896] usbcore: registered new device driver usb
[ 0.422829] pps_core: LinuxPPS API ver. 1 registered
[ 0.427917] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.437269] PTP clock support registered
[ 0.441471] EDAC MC: Ver: 3.0.0
[ 0.445610] scmi_core: SCMI protocol bus registered
[ 0.451233] FPGA manager framework
[ 0.454880] Advanced Linux Sound Architecture Driver Initialized.
[ 0.462178] vgaarb: loaded
[ 0.465594] clocksource: Switched to clocksource arch_sys_counter
[ 0.472208] VFS: Disk quotas dquot_6.6.0
[ 0.476279] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.483556] pnp: PnP ACPI: disabled
[ 0.494847] NET: Registered PF_INET protocol family
[ 0.500205] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.509639] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear)
[ 0.518467] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.526400] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.534624] TCP bind hash table entries: 16384 (order: 7, 524288 bytes, linear)
[ 0.542665] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.549636] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear)
[ 0.556567] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear)
[ 0.564109] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.570494] RPC: Registered named UNIX socket transport module.
[ 0.576599] RPC: Registered udp transport module.
[ 0.581407] RPC: Registered tcp transport module.
[ 0.586214] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.592813] PCI: CLS 0 bytes, default 64
[ 0.597233] kvm [1]: IPA Size Limit: 40 bits
[ 0.602949] kvm [1]: vgic-v2@100020000
[ 0.606815] kvm [1]: GIC system register CPU interface enabled
[ 0.612814] kvm [1]: vgic interrupt IRQ9
[ 0.616853] kvm [1]: Hyp mode initialized successfully
[ 0.623704] Initialise system trusted keyrings
[ 0.628672] workingset: timestamp_bits=42 max_order=19 bucket_order=0
[ 0.635799] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.642274] NFS: Registering the id_resolver key type
[ 0.647515] Key type id_resolver registered
[ 0.651794] Key type id_legacy registered
[ 0.655915] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 0.662778] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
[ 0.670643] 9p: Installing v9fs 9p2000 file system support
[ 0.715088] Key type asymmetric registered
[ 0.719295] Asymmetric key parser 'x509' registered
[ 0.724359] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[ 0.731936] io scheduler mq-deadline registered
[ 0.736569] io scheduler kyber registered
[ 0.740713] io scheduler bfq registered
[ 0.747644] pinctrl-single 4084000.pinctrl: 33 pins, size 132
[ 0.754212] pinctrl-single f4000.pinctrl: 180 pins, size 720
[ 0.762108] pinctrl-single a40000.pinctrl: 512 pins, size 2048
[ 0.770518] EINJ: ACPI disabled.
[ 0.781482] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.798351] loop: module loaded
[ 0.802654] megasas: 07.725.01.00-rc1
[ 0.811527] tun: Universal TUN/TAP device driver, 1.6
[ 0.817832] thunder_xcv, ver 1.0
[ 0.821175] thunder_bgx, ver 1.0
[ 0.824512] nicpf, ver 1.0
[ 0.827839] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version
[ 0.835241] hns3: Copyright (c) 2017 Huawei Corporation.
[ 0.840746] hclge is initializing
[ 0.844159] e1000: Intel(R) PRO/1000 Network Driver
[ 0.849145] e1000: Copyright (c) 1999-2006 Intel Corporation.
[ 0.855060] e1000e: Intel(R) PRO/1000 Network Driver
[ 0.860134] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 0.866213] igb: Intel(R) Gigabit Ethernet Network Driver
[ 0.871731] igb: Copyright (c) 2007-2014 Intel Corporation.
[ 0.877450] igbvf: Intel(R) Gigabit Virtual Function Network Driver
[ 0.883855] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
[ 0.890120] sky2: driver version 1.30
[ 0.895050] VFIO - User Level meta-driver version: 0.3
[ 0.902621] usbcore: registered new interface driver usb-storage
[ 0.910997] i2c_dev: i2c /dev entries driver
[ 0.916565] ghes_edac: GHES probing device list is empty
[ 0.917743] sdhci: Secure Digital Host Controller Interface driver
[ 0.929514] sdhci: Copyright(c) Pierre Ossman
[ 0.935134] Synopsys Designware Multimedia Card Interface Driver
[ 0.941914] sdhci-pltfm: SDHCI platform and OF driver helper
[ 0.948904] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.956108] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping ....
[ 0.963687] usbcore: registered new interface driver usbhid
[ 0.969422] usbhid: USB HID core driver
[ 0.975801] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
[ 0.985364] optee: probing for conduit method.
I/TC: Reserved shared memory is enabled
I/TC: Dynamic shared memory is enabled
I/TC: Normal World virtualization support is disabled
I/TC: Asynchronous notifications are disabled
[ 0.989976] optee: revision 3.20 (b031393c)
[ 1.006668] optee: dynamic shared memory is enabled
[ 1.016933] random: crng init done
[ 1.020677] optee: initialized driver
[ 1.027210] NET: Registered PF_PACKET protocol family
[ 1.032556] 9pnet: Installing 9P2000 support
[ 1.037009] Key type dns_resolver registered
[ 1.051995] registered taskstats version 1
[ 1.056597] Loading compiled-in X.509 certificates
[ 1.077009] ti-sci 44043000.system-controller: ABI: 3.1 (firmware rev 0x0008 '8.6.4--v08.06.04 (Chill Capybar')
[ 1.188233] omap_i2c 20000000.i2c: bus 0 rev0.12 at 400 kHz
[ 1.195989] pca953x 1-0022: supply vcc not found, using dummy regulator
[ 1.202994] pca953x 1-0022: using AI
[ 1.230900] omap_i2c 20010000.i2c: bus 1 rev0.12 at 400 kHz
[ 1.237275] ti-sci-intr 4210000.interrupt-controller: Interrupt Router 5 domain created
[ 1.245783] ti-sci-intr bus@f4000:interrupt-controller@a00000: Interrupt Router 3 domain created
[ 1.255149] ti-sci-inta 48000000.interrupt-controller: Interrupt Aggregator domain 28 created
[ 1.264255] ti-udma 485c0100.dma-controller: Number of rings: 68
[ 1.271802] ti-udma 485c0100.dma-controller: Channels: 24 (bchan: 12, tchan: 6, rchan: 6)
[ 1.282199] ti-udma 485c0000.dma-controller: Number of rings: 288
[ 1.297684] ti-udma 485c0000.dma-controller: Channels: 44 (tchan: 29, rchan: 15)
[ 1.309056] printk: console [ttyS2] disabled
[ 1.313549] 2800000.serial: ttyS2 at MMIO 0x2800000 (irq = 314, base_baud = 3000000) is a 8250
[ 1.322440] printk: console [ttyS2] enabled
[ 1.322440] printk: console [ttyS2] enabled
[ 1.330897] printk: bootconsole [ns16550a0] disabled
[ 1.330897] printk: bootconsole [ns16550a0] disabled
[ 1.345886] spi-nor spi0.0: s28hs512t (65536 Kbytes)
[ 1.355772] davinci_mdio 8000f00.mdio: Configuring MDIO in manual mode
[ 1.401602] davinci_mdio 8000f00.mdio: davinci mdio revision 9.7, bus freq 1000000
[ 1.411609] davinci_mdio 8000f00.mdio: phy[0]: device 8000f00.mdio:00, driver TI DP83867
[ 1.419791] am65-cpsw-nuss 8000000.ethernet: initializing am65 cpsw nuss version 0x6BA00903, cpsw version 0x6BA80903 Ports: 3 quirks:00000002
[ 1.432712] am65-cpsw-nuss 8000000.ethernet: initialized cpsw ale version 1.4
[ 1.439845] am65-cpsw-nuss 8000000.ethernet: ALE Table size 512
[ 1.447558] am65-cpsw-nuss 8000000.ethernet: set new flow-id-base 16
[ 1.458733] mmc0: CQHCI version 5.10
[ 1.475906] debugfs: Directory 'pd:114' with parent 'pm_genpd' already present!
[ 1.475972] mmc1: CQHCI version 5.10
[ 1.486003] clk: Disabling unused clocks
[ 1.506202] mmc0: SDHCI controller on fa10000.mmc [fa10000.mmc] using ADMA 64-bit
[ 1.526896] ALSA device list:
[ 1.529935] mmc1: SDHCI controller on fa00000.mmc [fa00000.mmc] using ADMA 64-bit
[ 1.530493] No soundcards found.
[ 1.541640] Waiting for root device PARTUUID=1a3b1d0c-02...
[ 1.586789] mmc1: error -110 whilst initialising SD card
[ 1.596899] mmc0: Command Queue Engine enabled
[ 1.601418] mmc0: new HS200 MMC card at address 0001
[ 1.607300] mmcblk0: mmc0:0001 S0J56X 14.8 GiB
[ 1.613696] mmcblk0: p1 p2 p3
[ 1.617696] mmcblk0boot0: mmc0:0001 S0J56X 31.5 MiB
[ 1.624023] mmcblk0boot1: mmc0:0001 S0J56X 31.5 MiB
[ 1.630292] mmcblk0rpmb: mmc0:0001 S0J56X 4.00 MiB, chardev (241:0)
[ 1.696273] mmc1: new ultra high speed SDR104 SDHC card at address aaaa
[ 1.703874] mmcblk1: mmc1:aaaa SB16G 14.8 GiB
[ 1.714181] mmcblk1: p1 p2
[ 1.761055] EXT4-fs (mmcblk1p2): mounted filesystem ada24f03-4877-48a7-b987-0cb955f190f3 with ordered data mode. Quota mode: none.
[ 1.772951] VFS: Mounted root (ext4 filesystem) on device 179:98.
[ 1.786558] devtmpfs: mounted
[ 1.790292] Freeing unused kernel memory: 1024K
[ 1.794901] Run /sbin/init as init process
[ 2.071503] systemd[1]: System time before build time, advancing clock.
[ 2.240624] NET: Registered PF_INET6 protocol family
[ 2.247132] Segment Routing with IPv6
[ 2.250897] In-situ OAM (IOAM) with IPv6
[ 2.311150] systemd[1]: systemd 247.3-7+deb11u1 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified)
[ 2.334834] systemd[1]: Detected architecture arm64.
Welcome to Debian GNU/Linux 11 (bullseye)!
[ 2.365032] systemd[1]: Set hostname to <BeagleBone>.
[ 2.983451] systemd[1]: /lib/systemd/system/plymouth-start.service:16: Unit configured to use KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update your service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed.
[ 3.180711] systemd[1]: Queued start job for default target Graphical Interface.
[ 3.265539] systemd[1]: Created slice system-getty.slice.
[ OK ] Created slice system-getty.slice.
[ 3.288088] systemd[1]: Created slice system-modprobe.slice.
[ OK ] Created slice system-modprobe.slice.
[ 3.312124] systemd[1]: Created slice system-serial\x2dgetty.slice.
[ OK ] Created slice system-serial\x2dgetty.slice.
[ 3.335758] systemd[1]: Created slice User and Session Slice.
[ OK ] Created slice User and Session Slice.
[ 3.358296] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ OK ] Started Forward Password R…uests to Wall Directory Watch.
[ 3.382029] systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped.
[ 3.394235] systemd[1]: Reached target Remote File Systems.
[ OK ] Reached target Remote File Systems.
[ 3.417894] systemd[1]: Reached target Slices.
[ OK ] Reached target Slices.
[ 3.433923] systemd[1]: Reached target Swap.
[ OK ] Reached target Swap.
[ 3.453767] systemd[1]: Listening on Syslog Socket.
[ OK ] Listening on Syslog Socket.
[ 3.470618] systemd[1]: Listening on fsck to fsckd communication Socket.
[ OK ] Listening on fsck to fsckd communication Socket.
[ 3.494327] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ OK ] Listening on initctl Compatibility Named Pipe.
[ 3.518953] systemd[1]: Listening on Journal Audit Socket.
[ OK ] Listening on Journal Audit Socket.
[ 3.542613] systemd[1]: Listening on Journal Socket (/dev/log).
[ OK ] Listening on Journal Socket (/dev/log).
[ 3.566708] systemd[1]: Listening on Journal Socket.
[ OK ] Listening on Journal Socket.
[ 3.582989] systemd[1]: Listening on Network Service Netlink Socket.
[ OK ] Listening on Network Service Netlink Socket.
[ 3.606883] systemd[1]: Listening on udev Control Socket.
[ OK ] Listening on udev Control Socket.
[ 3.630502] systemd[1]: Listening on udev Kernel Socket.
[ OK ] Listening on udev Kernel Socket.
[ 3.694147] systemd[1]: Mounting Huge Pages File System...
Mounting Huge Pages File System...
[ 3.716822] systemd[1]: Mounting POSIX Message Queue File System...
Mounting POSIX Message Queue File System...
[ 3.744706] systemd[1]: Mounting /sys/kernel/debug...
Mounting /sys/kernel/debug...
[ 3.766585] systemd[1]: Condition check resulted in Kernel Trace File System being skipped.
[ 3.782129] systemd[1]: Starting Set the console keyboard layout...
Starting Set the console keyboard layout...
[ 3.813201] systemd[1]: Starting Create list of static device nodes for the current kernel...
Starting Create list of st…odes for the current kernel...
[ 3.874529] systemd[1]: Starting Load Kernel Module configfs...
Starting Load Kernel Module configfs...
[ 3.908463] systemd[1]: Starting Load Kernel Module drm...
Starting Load Kernel Module drm...
[ 3.942932] systemd[1]: Starting Load Kernel Module fuse...
Starting Load Kernel Module fuse...
[ 3.968785] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[ 3.978333] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
[ 3.998279] systemd[1]: Starting Journal Service...
Starting Journal Service...
[ 4.052847] fuse: init (API version 7.38)
[ 4.087028] systemd[1]: Starting Load Kernel Modules...
Starting Load Kernel Modules...
[ 4.115869] systemd[1]: Starting Remount Root and Kernel File Systems...
Starting Remount Root and Kernel File Systems...
[ 4.174804] systemd[1]: Starting Coldplug All udev Devices...
Starting Coldplug All udev Devices...
[ 4.207304] systemd[1]: Mounted Huge Pages File System.
[ OK ] Mounted Huge Pages File System.
[ 4.233941] systemd[1]: Mounted POSIX Message Queue File System.
[ OK ] Mounted POSIX Message Queue File System.
[ 4.255840] EXT4-fs (mmcblk1p2): re-mounted ada24f03-4877-48a7-b987-0cb955f190f3. Quota mode: none.
[ 4.266931] systemd[1]: Mounted /sys/kernel/debug.
[ OK ] Mounted /sys/kernel/debug.
[ 4.295893] systemd[1]: Finished Create list of static device nodes for the current kernel.
[ OK ] Finished Create list of st… nodes for the current kernel.
[ 4.332259] systemd[1]: modprobe@configfs.service: Succeeded.
[ 4.343619] systemd[1]: Finished Load Kernel Module configfs.
[ OK ] Finished Load Kernel Module configfs.
[ 4.371787] systemd[1]: modprobe@drm.service: Succeeded.
[ 4.383517] systemd[1]: Finished Load Kernel Module drm.
[ OK ] Finished Load Kernel Module drm.
[ 4.407757] systemd[1]: modprobe@fuse.service: Succeeded.
[ 4.419477] systemd[1]: Finished Load Kernel Module fuse.
[ OK ] Finished Load Kernel Module fuse.
[ 4.444729] systemd[1]: Finished Load Kernel Modules.
[ OK ] Finished Load Kernel Modules.
[ 4.464600] systemd[1]: Finished Remount Root and Kernel File Systems.
[ OK ] Finished Remount Root and Kernel File Systems.
[ 4.494902] systemd[1]: Started Journal Service.
[ OK ] Started Journal Service.
Mounting FUSE Control File System...
Mounting Kernel Configuration File System...
Starting Flush Journal to Persistent Storage...
[ 4.628548] systemd-journald[102]: Received client request to flush runtime journal.
Starting Load/Save Random Seed...
[ 4.646619] systemd-journald[102]: File /var/log/journal/5754e58d5a4c40e28ca9317da90084a9/system.journal corrupted or uncleanly shut down, renaming and replacing.
Starting Apply Kernel Variables...
Starting Create System Users...
[ OK ] Finished Set the console keyboard layout.
[ OK ] Mounted FUSE Control File System.
[ OK ] Mounted Kernel Configuration File System.
[ OK ] Finished Apply Kernel Variables.
[ OK ] Finished Coldplug All udev Devices.
Starting Helper to synchronize boot up for ifupdown...
[ OK ] Finished Load/Save Random Seed.
[ OK ] Finished Flush Journal to Persistent Storage.
[ OK ] Finished Helper to synchronize boot up for ifupdown.
[ OK ] Finished Create System Users.
Starting Create Static Device Nodes in /dev...
[ OK ] Finished Create Static Device Nodes in /dev.
[ OK ] Reached target Local File Systems (Pre).
Starting Rule-based Manage…for Device Events and Files...
[ OK ] Started Rule-based Manager for Device Events and Files.
Starting Show Plymouth Boot Screen...
Starting Network Service...
[ OK ] Started Show Plymouth Boot Screen.
[ OK ] Started Forward Password R…s to Plymouth Directory Watch.
[ OK ] Reached target Local Encrypted Volumes.
[ OK ] Reached target Paths.
[ OK ] Started Network Service.
[ OK ] Found device /dev/ttyS2.
[ 7.633289] at24 0-0050: supply vcc not found, using dummy regulator
[ 7.766012] at24 0-0050: 131072 byte 24c1024 EEPROM, writable, 1 bytes/write
[ 8.339954] am65-cpsw-nuss 8000000.ethernet eth0: PHY [8000f00.mdio:00] driver [TI DP83867] (irq=POLL)
[ 8.349419] am65-cpsw-nuss 8000000.ethernet eth0: configuring for phy/rgmii-rxid link mode
[ OK ] Found device /dev/mmcblk1p1.
Mounting /boot/firmware...
[ 8.675037] FAT-fs (mmcblk1p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ OK ] Mounted /boot/firmware.
[ OK ] Reached target Local File Systems.
Starting Set console font and keymap...
Starting Raise network interfaces...
Starting Tell Plymouth To Write Out Runtime Data...
Starting Create Volatile Files and Directories...
[ OK ] Finished Tell Plymouth To Write Out Runtime Data.
[ OK ] Finished Set console font and keymap.
[ OK ] Finished Create Volatile Files and Directories.
Starting Network Name Resolution...
Starting Network Time Synchronization...
Starting Update UTMP about System Boot/Shutdown...
[ OK ] Finished Update UTMP about System Boot/Shutdown.
[ OK ] Finished Raise network interfaces.
[ OK ] Started Network Time Synchronization.
[ OK ] Reached target System Initialization.
[ OK ] Started Daily Cleanup of Temporary Directories.
[ OK ] Reached target System Time Set.
[ OK ] Reached target System Time Synchronized.
[ OK ] Started Periodic ext4 Onli…ata Check for All Filesystems.
[ OK ] Started Discard unused blocks once a week.
[ OK ] Started Daily rotation of log files.
[ OK ] Reached target Timers.
[ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket.
[ OK ] Listening on D-Bus System Message Bus Socket.
Starting Docker Socket for the API.
[ OK ] Listening on GPS (Global P…ioning System) Daemon Sockets.
[ OK ] Listening on Docker Socket for the API.
[ OK ] Reached target Sockets.
[ OK ] Reached target Basic System.
Starting Avahi mDNS/DNS-SD Stack...
Starting BeagleBoard.org EDGEAI K3 R5...
Starting BeagleBoard Generate Symlinks...
Starting BeagleBoard.org USB gadgets...
[ OK ] Started Regular background program processing daemon.
[ OK ] Started D-Bus System Message Bus.
Starting dphys-swapfile - …unt, and delete a swap file...
Starting Remove Stale Onli…t4 Metadata Check Snapshots...
Starting Grow Root Partition...
Starting Initialize hardware monitoring sensors...
Starting System Logging Service...
[ 10.369127] systemd-journald[102]: Failed to read journal file /var/log/journal/5754e58d5a4c40e28ca9317da90084a9/user-1000.journal for rotation, trying to move it out of the way: Text file busy
[ 10.402589] am65-cpsw-nuss 8000000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx
[ 10.411534] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Starting User Login Management...
Starting LSB: Start daemon at boot time...
Starting Disk Manager...
Starting WPA supplicant...
[ OK ] Started Network Name Resolution.
[FAILED] Failed to start BeagleBoard.org EDGEAI K3 R5.
See 'systemctl status bb-start-vision-apps-eaik-8-2.service' for details.
[ OK ] Reached target Host and Network Name Lookups.
[ OK ] Finished BeagleBoard Generate Symlinks.
[ OK ] Started System Logging Service.
[ OK ] Finished Initialize hardware monitoring sensors.
[ OK ] Finished Remove Stale Onli…ext4 Metadata Check Snapshots.
[ OK ] Started WPA supplicant.
[ OK ] Started Avahi mDNS/DNS-SD Stack.
[ OK ] Reached target Network.
[ OK ] Reached target Network is Online.
Starting BeagleBoard.org Code Server...
Starting Beagle Flasher Shutdown...
Starting containerd container runtime...
Starting LSB: disk temperature monitoring daemon...
Starting A high performanc… and a reverse proxy server...
Starting Permit User Sessions...
[ OK ] Finished Beagle Flasher Shutdown.
[ OK ] Started LSB: Start daemon at boot time.
[ OK ] Started LSB: disk temperature monitoring daemon.
[ OK ] Finished Permit User Sessions.
Starting Light Display Manager...
Starting Hold until boot process finishes up...
[ OK ] Found device /dev/ttyGS0.
[ 11.801878] Mass Storage Function, version: 2009/09/11
[ 11.801913] LUN: removable file: (no medium)
[ OK ] Started BeagleBoard.org Code Server.
[ OK ] Started User Login Management.
Starting Authorization Manager...
[ OK ] Started Authorization Manager.
[FAILED] Failed to start Grow Root Partition.
[ 13.134612] Adding 460796k swap on /var/swap. Priority:-2 extents:9 across:5103616k SS
[ 16.356516] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 16.387729] Bridge firewalling registered
[FAILED] Failed to start Docker Application Container Engine.
Debian GNU/Linux 11 BeagleBone ttyS2
BeagleBoard.org Debian Bullseye Xfce Image 2023-04-06
Support: https://bbb.io/debian
default username:password is [debian:temppwd]
BeagleBone login: [ 20.610899] platform mdio-mux-1: deferred probe pending
debian
Password:
The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.
Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
Last login: Thu Apr 6 07:56:21 UTC 2023 on ttyS2
[ 24.336565] memfd_create() without MFD_EXEC nor MFD_NOEXEC_SEAL, pid=648 'systemd'
debian@BeagleBone:~$
debian@BeagleBone:~$ sudo hd -v -n 64 /sys/class/i2c-dev/i2c-0/device/0-0050/eeprom
00000000 aa 55 33 ee 01 fc 00 10 2e 00 41 4d 36 34 2d 47 |.U3.......AM64-G|
00000010 50 45 56 4d 00 00 00 00 00 00 45 32 30 31 30 31 |PEVM......E20101|
00000020 30 31 45 32 00 00 30 31 30 31 30 38 32 31 00 00 |01E2..01010821..|
00000030 00 00 00 00 30 31 39 36 11 02 00 10 29 13 c2 00 |....0196....)...|
00000040
debian@BeagleBone:~$ sudo head /sys/kernel/debug/mmc*/ios
==> /sys/kernel/debug/mmc0/ios <==
clock: 200000000 Hz
actual clock: 200000000 Hz
vdd: 7 (1.65 - 1.95 V)
bus mode: 2 (push-pull)
chip select: 0 (don't care)
power mode: 2 (on)
bus width: 3 (8 bits)
timing spec: 9 (mmc HS200)
signal voltage: 1 (1.80 V)
driver type: 0 (driver type B)
==> /sys/kernel/debug/mmc1/ios <==
clock: 200000000 Hz
actual clock: 200000000 Hz
vdd: 21 (3.3 ~ 3.4 V)
bus mode: 2 (push-pull)
chip select: 0 (don't care)
power mode: 2 (on)
bus width: 2 (4 bits)
timing spec: 6 (sd uhs SDR104)
signal voltage: 1 (1.80 V)
driver type: 0 (driver type B)
debian@BeagleBone:~$ ping 192.168.0.1
PING 192.168.0.1 (192.168.0.1) 56(84) bytes of data.
64 bytes from 192.168.0.1: icmp_seq=1 ttl=64 time=0.517 ms
64 bytes from 192.168.0.1: icmp_seq=2 ttl=64 time=0.342 ms
^C
--- 192.168.0.1 ping statistics ---
2 packets transmitted, 2 received, 0% packet loss, time 1004ms
rtt min/avg/max/mdev = 0.342/0.429/0.517/0.087 ms
debian@BeagleBone:~$ ip addr
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000
link/ether f4:84:4c:f9:59:92 brd ff:ff:ff:ff:ff:ff
inet 192.168.0.51/24 brd 192.168.0.255 scope global dynamic eth0
valid_lft 7109sec preferred_lft 7109sec
inet6 fe80::f684:4cff:fef9:5992/64 scope link
valid_lft forever preferred_lft forever
3: eth1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000
link/ether 70:f1:0f:76:ff:0d brd ff:ff:ff:ff:ff:ff
debian@BeagleBone:~$
Raw
am642-sk
U-Boot SPL 2023.04-00841-g41bc8809124f (Apr 14 2023 - 00:22:57 -0500)
EEPROM not available at 0x50, trying to read at 0x51
SYSFW ABI: 3.1 (firmware rev 0x0008 '8.6.4--v08.06.04 (Chill Capybar')
SPL initial stack usage: 13360 bytes
Trying to boot from MMC2
spl_load_fit_image: Skip load 'dm': image size is 0!
Loading Environment from MMC... MMC Device 0 not found
*** Warning - No MMC card found, using default environment
Starting ATF on ARM64 core...
NOTICE: BL31: v2.8(release):v2.8-745-ga1c924df6d31
NOTICE: BL31: Built : 00:22:56, Apr 14 2023
I/TC:
I/TC: OP-TEE version: 3.21.0-rc1-1-gb031393cd781 (gcc version 12.2.1 20221205 (Arm GNU Toolchain 12.2.Rel1 (Build arm-12.24))) #1 Fri Apr 14 05:22:57 UTC 2023 aarch64
I/TC: WARNING: This OP-TEE configuration might be insecure!
I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html
I/TC: Primary CPU initializing
I/TC: SYSFW ABI: 3.1 (firmware rev 0x0008 '8.6.4--v08.06.04 (Chill Capybar')
I/TC: HUK Initialized
I/TC: Activated SA2UL device
I/TC: Fixing SA2UL firewall owner for GP device
I/TC: Enabled firewalls for SA2UL TRNG device
I/TC: SA2UL TRNG initialized
I/TC: SA2UL Drivers initialized
I/TC: Primary CPU switching to normal world boot
U-Boot SPL 2023.04-00841-g41bc8809124f (Apr 14 2023 - 00:23:00 -0500)
SYSFW ABI: 3.1 (firmware rev 0x0008 '8.6.4--v08.06.04 (Chill Capybar')
Trying to boot from MMC2
U-Boot 2023.04-00841-g41bc8809124f (Apr 14 2023 - 00:23:00 -0500)
SoC: AM64X SR1.0 GP
Model: Texas Instruments AM642 SK
Board: AM64-SKEVM rev E3
DRAM: 2 GiB
Core: 54 devices, 27 uclasses, devicetree: separate
MMC: mmc@fa00000: 1
Loading Environment from MMC... MMC Device 0 not found
*** Warning - No MMC card found, using default environment
In: serial@2800000
Out: serial@2800000
Err: serial@2800000
Net: eth0: ethernet@8000000port@1
Warning: ethernet@8000000port@2 MAC addresses don't match:
Address in ROM is ac:1f:0f:84:01:31
Address in environment is 70:ff:76:1d:f3:4b
, eth1: ethernet@8000000port@2
Hit any key to stop autoboot: 0
=> mmc dev 1
switch to partitions #0, OK
mmc1 is current device
=> mmc info
Device: mmc@fa00000
Manufacturer ID: 3
OEM: 5344
Name: SB16G
Bus Speed: 50000000
Mode: SD High Speed (50MHz)
Rd Block Len: 512
SD version 3.0
High Capacity: Yes
Capacity: 14.8 GiB
Bus Width: 4-bit
Erase Group Size: 512 Bytes
=> dhcp
link up on port 1, speed 100, full duplex
BOOTP broadcast 1
BOOTP broadcast 2
BOOTP broadcast 3
DHCP client bound to address 192.168.0.53 (1034 ms)
*** Warning: no boot file name; using 'C0A80035.img'
Using ethernet@8000000port@1 device
TFTP from server 192.168.0.1; our IP address is 192.168.0.53
Filename 'C0A80035.img'.
Load address: 0x82000000
Loading: *
TFTP error: 'File not found' (1)
Not retrying...
am65_cpsw_nuss_port ethernet@8000000port@1: RX dma free_pkt failed -22
=> usb start
starting USB...
Bus usb@f400000: Register 2000840 NbrPorts 2
Starting the controller
USB XHCI 1.00
scanning bus usb@f400000 for devices... 5 USB Device(s) found
scanning usb for storage devices... 0 Storage Device(s) found
=> usb tree
USB device tree:
1 Hub (5 Gb/s, 0mA)
| U-Boot XHCI Host Controller
|
+-2 Hub (480 Mb/s, 100mA)
|
+-3 Vendor specific (480 Mb/s, 250mA)
| ASIX Elec. Corp. AX88772 000001
|
+-4 Human Interface (1.5 Mb/s, 90mA)
| Logitech USB Keyboard
|
+-5 Human Interface (1.5 Mb/s, 98mA)
Logitech USB Optical Mouse
=> boot
switch to partitions #0, OK
mmc1 is current device
SD/MMC found on device 1
Failed to load 'boot.scr'
Failed to load 'uEnv.txt'
21719552 bytes read in 929 ms (22.3 MiB/s)
42261 bytes read in 32 ms (1.3 MiB/s)
## Flattened Device Tree blob at 88000000
Booting using the fdt blob at 0x88000000
Working FDT set to 88000000
Loading Device Tree to 000000008fff2000, end 000000008ffff514 ... OK
Working FDT set to 8fff2000
Starting kernel ...
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[ 0.000000] Linux version 6.3.0-rc6-next-20230413-00011-gf90367ade853 (nmenon@uda0133052) (Ubuntu clang version 17.0.0 (++20230329031506+d4879d769095-1~exp1~20230329151616.834), Ubuntu LLD 17.0.0) #kernel_patch_verify_build SMP PREEMPT Thu Apr 13 22:54:01 CDT 2
[ 0.000000] Machine model: Texas Instruments AM642 SK
[ 0.000000] earlycon: ns16550a0 at MMIO32 0x0000000002800000 (options '')
[ 0.000000] printk: bootconsole [ns16550a0] enabled
[ 0.000000] efi: UEFI not found.
[ 0.000000] OF: reserved mem: 0x000000009e800000..0x000000009fffffff (24576 KiB) nomap non-reusable optee@9e800000
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a0000000, size 1 MiB
[ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@a0000000, compatible id shared-dma-pool
[ 0.000000] OF: reserved mem: 0x00000000a0000000..0x00000000a00fffff (1024 KiB) nomap non-reusable r5f-dma-memory@a0000000
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a0100000, size 15 MiB
[ 0.000000] OF: reserved mem: initialized node r5f-memory@a0100000, compatible id shared-dma-pool
[ 0.000000] OF: reserved mem: 0x00000000a0100000..0x00000000a0ffffff (15360 KiB) nomap non-reusable r5f-memory@a0100000
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a1000000, size 1 MiB
[ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@a1000000, compatible id shared-dma-pool
[ 0.000000] OF: reserved mem: 0x00000000a1000000..0x00000000a10fffff (1024 KiB) nomap non-reusable r5f-dma-memory@a1000000
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a1100000, size 15 MiB
[ 0.000000] OF: reserved mem: initialized node r5f-memory@a1100000, compatible id shared-dma-pool
[ 0.000000] OF: reserved mem: 0x00000000a1100000..0x00000000a1ffffff (15360 KiB) nomap non-reusable r5f-memory@a1100000
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a2000000, size 1 MiB
[ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@a2000000, compatible id shared-dma-pool
[ 0.000000] OF: reserved mem: 0x00000000a2000000..0x00000000a20fffff (1024 KiB) nomap non-reusable r5f-dma-memory@a2000000
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a2100000, size 15 MiB
[ 0.000000] OF: reserved mem: initialized node r5f-memory@a2100000, compatible id shared-dma-pool
[ 0.000000] OF: reserved mem: 0x00000000a2100000..0x00000000a2ffffff (15360 KiB) nomap non-reusable r5f-memory@a2100000
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a3000000, size 1 MiB
[ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@a3000000, compatible id shared-dma-pool
[ 0.000000] OF: reserved mem: 0x00000000a3000000..0x00000000a30fffff (1024 KiB) nomap non-reusable r5f-dma-memory@a3000000
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a3100000, size 15 MiB
[ 0.000000] OF: reserved mem: initialized node r5f-memory@a3100000, compatible id shared-dma-pool
[ 0.000000] OF: reserved mem: 0x00000000a3100000..0x00000000a3ffffff (15360 KiB) nomap non-reusable r5f-memory@a3100000
[ 0.000000] OF: reserved mem: 0x00000000a5000000..0x00000000a57fffff (8192 KiB) nomap non-reusable ipc-memories@a5000000
[ 0.000000] NUMA: No NUMA configuration found
[ 0.000000] NUMA: Faking a node at [mem 0x0000000080000000-0x00000000ffffffff]
[ 0.000000] NUMA: NODE_DATA [mem 0xffbf59c0-0xffbf7fff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff]
[ 0.000000] DMA32 empty
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000080000000-0x000000009e7fffff]
[ 0.000000] node 0: [mem 0x000000009e800000-0x00000000a3ffffff]
[ 0.000000] node 0: [mem 0x00000000a4000000-0x00000000a4ffffff]
[ 0.000000] node 0: [mem 0x00000000a5000000-0x00000000a57fffff]
[ 0.000000] node 0: [mem 0x00000000a5800000-0x00000000ffffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x00000000ffffffff]
[ 0.000000] cma: Reserved 32 MiB at 0x00000000fba00000
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.1 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: Trusted OS migration not required
[ 0.000000] psci: SMC Calling Convention v1.2
[ 0.000000] percpu: Embedded 22 pages/cpu s49448 r8192 d32472 u90112
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] CPU features: detected: GIC system register CPU interface
[ 0.000000] CPU features: detected: ARM erratum 845719
[ 0.000000] alternatives: applying boot alternatives
[ 0.000000] Kernel command line: console=ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000 root=PARTUUID=1a3b1d0c-02 rw rootfstype=ext4 rootwait
[ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.000000] Fallback order for Node 0: 0
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 516096
[ 0.000000] Policy zone: DMA
[ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off
[ 0.000000] Memory: 1904060K/2097152K available (13952K kernel code, 1370K rwdata, 4740K rodata, 1024K init, 542K bss, 160324K reserved, 32768K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000] rcu: RCU event tracing is enabled.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=2.
[ 0.000000] Trampoline variant of Tasks RCU enabled.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[ 0.000000] GICv3: 256 SPIs implemented
[ 0.000000] GICv3: 0 Extended SPIs implemented
[ 0.000000] Root IRQ handler: gic_handle_irq
[ 0.000000] GICv3: GICv3 features: 16 PPIs
[ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000001840000
[ 0.000000] ITS [mem 0x01820000-0x0182ffff]
[ 0.000000] GIC: enabling workaround for ITS: Socionext Synquacer pre-ITS
[ 0.000000] ITS@0x0000000001820000: Devices Table too large, reduce ids 20->19
[ 0.000000] ITS@0x0000000001820000: allocated 524288 Devices @80800000 (flat, esz 8, psz 64K, shr 0)
[ 0.000000] ITS: using cache flushing for cmd queue
[ 0.000000] GICv3: using LPI property table @0x0000000080030000
[ 0.000000] GIC: using cache flushing for LPI property table
[ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x0000000080040000
[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.000000] arch_timer: cp15 timer(s) running at 200.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0x3ffffffffffffff max_cycles: 0x2e2049d3e8, max_idle_ns: 440795210634 ns
[ 0.000001] sched_clock: 58 bits at 200MHz, resolution 5ns, wraps every 4398046511102ns
[ 0.008622] Console: colour dummy device 80x25
[ 0.013264] Calibrating delay loop (skipped), value calculated using timer frequency.. 400.00 BogoMIPS (lpj=800000)
[ 0.023945] pid_max: default: 32768 minimum: 301
[ 0.028731] LSM: initializing lsm=capability,integrity
[ 0.034126] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[ 0.041711] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[ 0.051959] RCU Tasks: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1.
[ 0.059340] RCU Tasks Trace: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1.
[ 0.067327] rcu: Hierarchical SRCU implementation.
[ 0.072246] rcu: Max phase no-delay instances is 1000.
[ 0.077914] Platform MSI: msi-controller@1820000 domain created
[ 0.084283] PCI/MSI: /bus@f4000/interrupt-controller@1800000/msi-controller@1820000 domain created
[ 0.094261] EFI services will not be available.
[ 0.099238] smp: Bringing up secondary CPUs ...
I/TC: Secondary CPU 1 initializing
I/TC: Secondary CPU 1 switching to normal world boot
[ 0.112925] Detected VIPT I-cache on CPU1
[ 0.113031] GICv3: CPU1: found redistributor 1 region 0:0x0000000001860000
[ 0.113051] GICv3: CPU1: using allocated LPI pending table @0x0000000080050000
[ 0.113114] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
[ 0.113243] smp: Brought up 1 node, 2 CPUs
[ 0.142623] SMP: Total of 2 processors activated.
[ 0.147432] CPU features: detected: 32-bit EL0 Support
[ 0.152697] CPU features: detected: 32-bit EL1 Support
[ 0.157953] CPU features: detected: CRC32 instructions
[ 0.163279] CPU: All CPU(s) started at EL2
[ 0.167499] alternatives: applying system-wide alternatives
[ 0.175812] devtmpfs: initialized
[ 0.188855] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.198878] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
[ 0.207329] pinctrl core: initialized pinctrl subsystem
[ 0.213841] DMI not present or invalid.
[ 0.218585] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.225865] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations
[ 0.233338] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.241481] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.249683] audit: initializing netlink subsys (disabled)
[ 0.255527] audit: type=2000 audit(0.160:1): state=initialized audit_enabled=0 res=1
[ 0.256195] thermal_sys: Registered thermal governor 'step_wise'
[ 0.263480] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.269685] cpuidle: using governor menu
[ 0.280632] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.287647] ASID allocator initialised with 65536 entries
[ 0.294065] Serial: AMBA PL011 UART driver
[ 0.312394] KASLR disabled due to lack of seed
[ 0.318105] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.325088] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page
[ 0.331496] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages
[ 0.338432] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page
[ 0.344836] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.351771] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page
[ 0.358176] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages
[ 0.365110] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page
[ 0.373779] ACPI: Interpreter disabled.
[ 0.378258] k3-chipinfo 43000014.chipid: Family:AM64X rev:SR1.0 JTAGID[0x0bb3802f] Detected
[ 0.388636] iommu: Default domain type: Translated
[ 0.393674] iommu: DMA domain TLB invalidation policy: strict mode
[ 0.400497] SCSI subsystem initialized
[ 0.404908] usbcore: registered new interface driver usbfs
[ 0.410570] usbcore: registered new interface driver hub
[ 0.416034] usbcore: registered new device driver usb
[ 0.421960] pps_core: LinuxPPS API ver. 1 registered
[ 0.427049] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.436402] PTP clock support registered
[ 0.440596] EDAC MC: Ver: 3.0.0
[ 0.444714] scmi_core: SCMI protocol bus registered
[ 0.450337] FPGA manager framework
[ 0.453973] Advanced Linux Sound Architecture Driver Initialized.
[ 0.461306] vgaarb: loaded
[ 0.464705] clocksource: Switched to clocksource arch_sys_counter
[ 0.471333] VFS: Disk quotas dquot_6.6.0
[ 0.475406] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.482697] pnp: PnP ACPI: disabled
[ 0.494066] NET: Registered PF_INET protocol family
[ 0.499429] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.508882] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear)
[ 0.517720] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.525662] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.533885] TCP bind hash table entries: 16384 (order: 7, 524288 bytes, linear)
[ 0.542006] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.549001] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear)
[ 0.555965] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear)
[ 0.563512] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.569939] RPC: Registered named UNIX socket transport module.
[ 0.576053] RPC: Registered udp transport module.
[ 0.580861] RPC: Registered tcp transport module.
[ 0.585668] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.592267] PCI: CLS 0 bytes, default 64
[ 0.596732] kvm [1]: IPA Size Limit: 40 bits
[ 0.602466] kvm [1]: vgic-v2@100020000
[ 0.606351] kvm [1]: GIC system register CPU interface enabled
[ 0.612351] kvm [1]: vgic interrupt IRQ9
[ 0.616389] kvm [1]: Hyp mode initialized successfully
[ 0.623246] Initialise system trusted keyrings
[ 0.628240] workingset: timestamp_bits=42 max_order=19 bucket_order=0
[ 0.635313] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.641753] NFS: Registering the id_resolver key type
[ 0.646987] Key type id_resolver registered
[ 0.651266] Key type id_legacy registered
[ 0.655386] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 0.662244] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
[ 0.670121] 9p: Installing v9fs 9p2000 file system support
[ 0.714180] Key type asymmetric registered
[ 0.718385] Asymmetric key parser 'x509' registered
[ 0.723452] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[ 0.731016] io scheduler mq-deadline registered
[ 0.735648] io scheduler kyber registered
[ 0.739788] io scheduler bfq registered
[ 0.746755] pinctrl-single 4084000.pinctrl: 33 pins, size 132
[ 0.753322] pinctrl-single f4000.pinctrl: 180 pins, size 720
[ 0.761211] pinctrl-single a40000.pinctrl: 512 pins, size 2048
[ 0.769547] EINJ: ACPI disabled.
[ 0.780416] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.797451] loop: module loaded
[ 0.801726] megasas: 07.725.01.00-rc1
[ 0.810393] tun: Universal TUN/TAP device driver, 1.6
[ 0.816590] thunder_xcv, ver 1.0
[ 0.819975] thunder_bgx, ver 1.0
[ 0.823310] nicpf, ver 1.0
[ 0.826617] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version
[ 0.834013] hns3: Copyright (c) 2017 Huawei Corporation.
[ 0.839517] hclge is initializing
[ 0.842927] e1000: Intel(R) PRO/1000 Network Driver
[ 0.847911] e1000: Copyright (c) 1999-2006 Intel Corporation.
[ 0.853809] e1000e: Intel(R) PRO/1000 Network Driver
[ 0.858881] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 0.864976] igb: Intel(R) Gigabit Ethernet Network Driver
[ 0.870493] igb: Copyright (c) 2007-2014 Intel Corporation.
[ 0.876210] igbvf: Intel(R) Gigabit Virtual Function Network Driver
[ 0.882613] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
[ 0.888874] sky2: driver version 1.30
[ 0.893786] VFIO - User Level meta-driver version: 0.3
[ 0.901358] usbcore: registered new interface driver usb-storage
[ 0.909632] i2c_dev: i2c /dev entries driver
[ 0.915136] ghes_edac: GHES probing device list is empty
[ 0.916229] sdhci: Secure Digital Host Controller Interface driver
[ 0.928035] sdhci: Copyright(c) Pierre Ossman
[ 0.933603] Synopsys Designware Multimedia Card Interface Driver
[ 0.940380] sdhci-pltfm: SDHCI platform and OF driver helper
[ 0.947374] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.954567] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping ....
[ 0.962124] usbcore: registered new interface driver usbhid
[ 0.967856] usbhid: USB HID core driver
[ 0.974195] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
[ 0.983722] optee: probing for conduit method.
I/TC: Reserved shared memory is enabled
I/TC: Dynamic shared memory is enabled
I/TC: Normal World virtualization support is disabled
I/TC: Asynchronous notifications are disabled
[ 0.988331] optee: revision 3.20 (b031393c)
[ 1.005050] optee: dynamic shared memory is enabled
[ 1.015341] random: crng init done
[ 1.019094] optee: initialized driver
[ 1.025705] NET: Registered PF_PACKET protocol family
[ 1.031046] 9pnet: Installing 9P2000 support
[ 1.035494] Key type dns_resolver registered
[ 1.050584] registered taskstats version 1
[ 1.055219] Loading compiled-in X.509 certificates
[ 1.075933] ti-sci 44043000.system-controller: ABI: 3.1 (firmware rev 0x0008 '8.6.4--v08.06.04 (Chill Capybar')
[ 1.184809] omap_i2c 20000000.i2c: bus 0 rev0.12 at 400 kHz
[ 1.192258] pca953x 1-0070: supply vcc not found, using dummy regulator
[ 1.199298] pca953x 1-0070: using no AI
[ 1.225626] omap_i2c 20010000.i2c: bus 1 rev0.12 at 400 kHz
[ 1.231754] ti-sci-intr 4210000.interrupt-controller: Interrupt Router 5 domain created
[ 1.240172] ti-sci-intr bus@f4000:interrupt-controller@a00000: Interrupt Router 3 domain created
[ 1.249534] ti-sci-inta 48000000.interrupt-controller: Interrupt Aggregator domain 28 created
[ 1.258632] ti-udma 485c0100.dma-controller: Number of rings: 68
[ 1.266193] ti-udma 485c0100.dma-controller: Channels: 24 (bchan: 12, tchan: 6, rchan: 6)
[ 1.276594] ti-udma 485c0000.dma-controller: Number of rings: 288
[ 1.292195] ti-udma 485c0000.dma-controller: Channels: 44 (tchan: 29, rchan: 15)
[ 1.303663] printk: console [ttyS2] disabled
[ 1.308155] 2800000.serial: ttyS2 at MMIO 0x2800000 (irq = 314, base_baud = 3000000) is a 8250
[ 1.317050] printk: console [ttyS2] enabled
[ 1.317050] printk: console [ttyS2] enabled
[ 1.325508] printk: bootconsole [ns16550a0] disabled
[ 1.325508] printk: bootconsole [ns16550a0] disabled
[ 1.341100] spi-nor spi0.0: s28hs512t (65536 Kbytes)
[ 1.350378] davinci_mdio 8000f00.mdio: Configuring MDIO in manual mode
[ 1.396712] davinci_mdio 8000f00.mdio: davinci mdio revision 9.7, bus freq 1000000
[ 1.409083] davinci_mdio 8000f00.mdio: phy[0]: device 8000f00.mdio:00, driver TI DP83867
[ 1.417202] davinci_mdio 8000f00.mdio: phy[1]: device 8000f00.mdio:01, driver TI DP83867
[ 1.425346] am65-cpsw-nuss 8000000.ethernet: initializing am65 cpsw nuss version 0x6BA00903, cpsw version 0x6BA80903 Ports: 3 quirks:00000002
[ 1.438280] am65-cpsw-nuss 8000000.ethernet: initialized cpsw ale version 1.4
[ 1.445417] am65-cpsw-nuss 8000000.ethernet: ALE Table size 512
[ 1.453220] am65-cpsw-nuss 8000000.ethernet: set new flow-id-base 16
[ 1.477705] mmc0: CQHCI version 5.10
[ 1.484268] mmc1: CQHCI version 5.10
[ 1.519372] mmc0: SDHCI controller on fa10000.mmc [fa10000.mmc] using ADMA 64-bit
[ 1.524964] mmc1: SDHCI controller on fa00000.mmc [fa00000.mmc] using ADMA 64-bit
[ 1.530114] debugfs: Directory 'pd:114' with parent 'pm_genpd' already present!
[ 1.544628] clk: Disabling unused clocks
[ 1.550618] sdhci-am654 fa10000.mmc: card claims to support voltages below defined range
[ 1.570272] mmc0: new SDIO card at address 0001
[ 1.576414] mmc1: error -110 whilst initialising SD card
[ 1.589314] ALSA device list:
[ 1.592285] No soundcards found.
[ 1.596207] Waiting for root device PARTUUID=1a3b1d0c-02...
[ 1.750263] mmc1: new high speed SDHC card at address aaaa
[ 1.756784] mmcblk1: mmc1:aaaa SB16G 14.8 GiB
[ 1.766924] mmcblk1: p1 p2
[ 1.811590] EXT4-fs (mmcblk1p2): mounted filesystem ada24f03-4877-48a7-b987-0cb955f190f3 with ordered data mode. Quota mode: none.
[ 1.823504] VFS: Mounted root (ext4 filesystem) on device 179:2.
[ 1.840372] devtmpfs: mounted
[ 1.844138] Freeing unused kernel memory: 1024K
[ 1.848757] Run /sbin/init as init process
[ 2.461682] systemd[1]: System time before build time, advancing clock.
[ 2.982607] NET: Registered PF_INET6 protocol family
[ 2.989254] Segment Routing with IPv6
[ 2.992999] In-situ OAM (IOAM) with IPv6
[ 3.101244] systemd[1]: systemd 247.3-7+deb11u1 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified)
[ 3.124872] systemd[1]: Detected architecture arm64.
Welcome to Debian GNU/Linux 11 (bullseye)!
[ 3.160232] systemd[1]: Set hostname to <BeagleBone>.
[ 3.854507] systemd[1]: /lib/systemd/system/plymouth-start.service:16: Unit configured to use KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update your service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed.
[ 4.062966] systemd[1]: Queued start job for default target Graphical Interface.
[ 4.140975] systemd[1]: Created slice system-getty.slice.
[ OK ] Created slice system-getty.slice.
[ 4.167288] systemd[1]: Created slice system-modprobe.slice.
[ OK ] Created slice system-modprobe.slice.
[ 4.191269] systemd[1]: Created slice system-serial\x2dgetty.slice.
[ OK ] Created slice system-serial\x2dgetty.slice.
[ 4.214899] systemd[1]: Created slice User and Session Slice.
[ OK ] Created slice User and Session Slice.
[ 4.237448] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ OK ] Started Forward Password R…uests to Wall Directory Watch.
[ 4.261161] systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped.
[ 4.273340] systemd[1]: Reached target Remote File Systems.
[ OK ] Reached target Remote File Systems.
[ 4.297003] systemd[1]: Reached target Slices.
[ OK ] Reached target Slices.
[ 4.317024] systemd[1]: Reached target Swap.
[ OK ] Reached target Swap.
[ 4.341097] systemd[1]: Listening on Syslog Socket.
[ OK ] Listening on Syslog Socket.
[ 4.361757] systemd[1]: Listening on fsck to fsckd communication Socket.
[ OK ] Listening on fsck to fsckd communication Socket.
[ 4.385502] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ OK ] Listening on initctl Compatibility Named Pipe.
[ 4.410094] systemd[1]: Listening on Journal Audit Socket.
[ OK ] Listening on Journal Audit Socket.
[ 4.433735] systemd[1]: Listening on Journal Socket (/dev/log).
[ OK ] Listening on Journal Socket (/dev/log).
[ 4.457833] systemd[1]: Listening on Journal Socket.
[ OK ] Listening on Journal Socket.
[ 4.478107] systemd[1]: Listening on Network Service Netlink Socket.
[ OK ] Listening on Network Service Netlink Socket.
[ 4.502037] systemd[1]: Listening on udev Control Socket.
[ OK ] Listening on udev Control Socket.
[ 4.525648] systemd[1]: Listening on udev Kernel Socket.
[ OK ] Listening on udev Kernel Socket.
[ 4.589264] systemd[1]: Mounting Huge Pages File System...
Mounting Huge Pages File System...
[ 4.615620] systemd[1]: Mounting POSIX Message Queue File System...
Mounting POSIX Message Queue File System...
[ 4.681367] systemd[1]: Mounting /sys/kernel/debug...
Mounting /sys/kernel/debug...
[ 4.701672] systemd[1]: Condition check resulted in Kernel Trace File System being skipped.
[ 4.753648] systemd[1]: Starting Set the console keyboard layout...
Starting Set the console keyboard layout...
[ 4.825801] systemd[1]: Starting Create list of static device nodes for the current kernel...
Starting Create list of st…odes for the current kernel...
[ 4.881556] systemd[1]: Starting Load Kernel Module configfs...
Starting Load Kernel Module configfs...
[ 4.903207] systemd[1]: Starting Load Kernel Module drm...
Starting Load Kernel Module drm...
[ 4.969665] systemd[1]: Starting Load Kernel Module fuse...
Starting Load Kernel Module fuse...
[ 5.072229] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[ 5.082057] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
[ 5.131711] systemd[1]: Starting Journal Service...
Starting Journal Service...
[ 5.301740] systemd[1]: Starting Load Kernel Modules...
Starting Load Kernel Modules...
[ 5.333058] systemd[1]: Starting Remount Root and Kernel File Systems...
Starting Remount Root and Kernel File Systems...
[ 5.401994] systemd[1]: Starting Coldplug All udev Devices...
Starting Coldplug All udev Devices...
[ 5.435290] systemd[1]: Mounted Huge Pages File System.
[ 5.441282] fuse: init (API version 7.38)
[ OK ] Mounted Huge Pages File System.
[ 5.462518] systemd[1]: Mounted POSIX Message Queue File System.
[ OK ] Mounted POSIX Message Queue File System.
[ 5.490497] systemd[1]: Mounted /sys/kernel/debug.
[ OK ] Mounted /sys/kernel/debug.[ 5.499968] EXT4-fs (mmcblk1p2): re-mounted ada24f03-4877-48a7-b987-0cb955f190f3. Quota mode: none.
[ 5.528190] systemd[1]: Finished Set the console keyboard layout.
[ OK ] Finished Set the console keyboard layout.
[ 5.566851] systemd[1]: Finished Create list of static device nodes for the current kernel.
[ OK ] Finished Create list of st… nodes for the current kernel.
[ 5.594803] systemd[1]: modprobe@configfs.service: Succeeded.
[ 5.606572] systemd[1]: Finished Load Kernel Module configfs.
[ OK ] Finished Load Kernel Module configfs.
[ 5.634846] systemd[1]: modprobe@drm.service: Succeeded.
[ 5.646685] systemd[1]: Finished Load Kernel Module drm.
[ OK ] Finished Load Kernel Module drm.
[ 5.670041] systemd[1]: Started Journal Service.
[ OK ] Started Journal Service.
[ OK ] Finished Load Kernel Module fuse.
[ OK ] Finished Load Kernel Modules.
[ OK ] Finished Remount Root and Kernel File Systems.
Mounting FUSE Control File System...
Mounting Kernel Configuration File System...
Starting Flush Journal to Persistent Storage...
Starting Load/Save Random Seed...
[ 6.023570] systemd-journald[103]: Received client request to flush runtime journal.
Starting Apply Kernel Variables...
[ 6.049194] systemd-journald[103]: File /var/log/journal/5754e58d5a4c40e28ca9317da90084a9/system.journal corrupted or uncleanly shut down, renaming and replacing.
Starting Create System Users...
[ OK ] Mounted FUSE Control File System.
[ OK ] Mounted Kernel Configuration File System.
[ OK ] Finished Load/Save Random Seed.
[ OK ] Finished Apply Kernel Variables.
[ OK ] Finished Coldplug All udev Devices.
Starting Helper to synchronize boot up for ifupdown...
[ OK ] Finished Helper to synchronize boot up for ifupdown.
[ OK ] Finished Create System Users.
[ OK ] Finished Flush Journal to Persistent Storage.
Starting Create Static Device Nodes in /dev...
[ OK ] Finished Create Static Device Nodes in /dev.
[ OK ] Reached target Local File Systems (Pre).
Starting Rule-based Manage…for Device Events and Files...
[ OK ] Started Rule-based Manager for Device Events and Files.
Starting Show Plymouth Boot Screen...
Starting Network Service...
[ OK ] Started Show Plymouth Boot Screen.
[ OK ] Started Forward Password R…s to Plymouth Directory Watch.
[ OK ] Reached target Local Encrypted Volumes.
[ OK ] Reached target Paths.
[ OK ] Started Network Service.
[ OK ] Found device /dev/ttyS2.
[ 8.860542] at24 0-0051: supply vcc not found, using dummy regulator
[ 9.057129] at24 0-0051: 65536 byte 24c512 EEPROM, writable, 1 bytes/write
[ 9.255744] am65-cpsw-nuss 8000000.ethernet eth0: PHY [8000f00.mdio:00] driver [TI DP83867] (irq=POLL)
[ 9.272832] am65-cpsw-nuss 8000000.ethernet eth0: configuring for phy/rgmii-rxid link mode
[ OK ] Found device /dev/mmcblk1p1.
Mounting /boot/firmware...
[ 9.747305] FAT-fs (mmcblk1p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ OK ] Mounted /boot/firmware.
[ OK ] Reached target Local File Systems.
Starting Set console font and keymap...
Starting Raise network interfaces...
Starting Tell Plymouth To Write Out Runtime Data...
Starting Create Volatile Files and Directories...
[ OK ] Finished Set console font and keymap.
[ OK ] Finished Tell Plymouth To Write Out Runtime Data.
[ OK ] Finished Create Volatile Files and Directories.
Starting Network Name Resolution...
Starting Network Time Synchronization...
Starting Update UTMP about System Boot/Shutdown...
[ OK ] Finished Update UTMP about System Boot/Shutdown.
[ OK ] Finished Raise network interfaces.
[ OK ] Started Network Time Synchronization.
[ OK ] Reached target System Initialization.
[ OK ] Started Daily Cleanup of Temporary Directories.
[ OK ] Reached target System Time Set.
[ OK ] Reached target System Time Synchronized.
[ OK ] Started Periodic ext4 Onli…ata Check for All Filesystems.
[ OK ] Started Discard unused blocks once a week.
[ OK ] Started Daily rotation of log files.
[ OK ] Reached target Timers.
[ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket.
[ OK ] Listening on D-Bus System Message Bus Socket.
Starting Docker Socket for the API.
[ OK ] Listening on GPS (Global P…ioning System) Daemon Sockets.
[ OK ] Listening on Docker Socket for the API.
[ OK ] Reached target Sockets.
[ OK ] Reached target Basic System.
Starting Avahi mDNS/DNS-SD Stack...
Starting BeagleBoard.org EDGEAI K3 R5...
Starting BeagleBoard Generate Symlinks...
Starting BeagleBoard.org USB gadgets...
[ OK ] Started Regular background program processing daemon.
[ OK ] Started D-Bus System Message Bus.
Starting dphys-swapfile - …unt, and delete a swap file...
Starting Remove Stale Onli…t4 Metadata Check Snapshots...
Starting Grow Root Partition...
Starting Initialize hardware monitoring sensors...
Starting System Logging Service...
Starting User Login Management...
Starting LSB: Start daemon at boot time...
Starting Disk Manager...
[ 11.329785] am65-cpsw-nuss 8000000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx
[ 11.339030] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Starting WPA supplicant...
[FAILED] Failed to start BeagleBoard.org EDGEAI K3 R5.
See 'systemctl status bb-start-vision-apps-eaik-8-2.service' for details.
[ 11.661040] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 11.667755] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 1
[ 11.676081] xhci-hcd xhci-hcd.1.auto: hcc params 0x200073c9 hci version 0x100 quirks 0x0000002000018010
[ 11.685912] xhci-hcd xhci-hcd.1.auto: irq 506, io mem 0x0f410000
[ 11.692415] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 11.698060] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 2
[ 11.706900] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed
[ 11.722856] hub 1-0:1.0: USB hub found
[ 11.727652] hub 1-0:1.0: 1 port detected
[ 11.735980] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 11.745620] hub 2-0:1.0: USB hub found
[ 11.749687] hub 2-0:1.0: 1 port detected
[ OK ] Finished Initialize hardware monitoring sensors.
[ 11.978265] systemd-journald[103]: Failed to read journal file /var/log/journal/5754e58d5a4c40e28ca9317da90084a9/user-1000.journal for rotation, trying to move it out of the way: Text file busy
[ 11.998794] usb 1-1: new high-speed USB device number 2 using xhci-hcd
[ OK ] Listening on Load/Save RF …itch Status /dev/rfkill Watch.
[ OK ] Finished BeagleBoard Generate Symlinks.
[ 12.158830] hub 1-1:1.0: USB hub found
[ 12.162973] hub 1-1:1.0: 4 ports detected
[ OK ] Started Network Name Resolution.
[ OK ] Reached target Host and Network Name Lookups.
[ 12.460794] usb 1-1.1: new high-speed USB device number 3 using xhci-hcd
[ 12.542339] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 12.630128] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 12.664828] usb 1-1.2: new low-speed USB device number 4 using xhci-hcd
[ OK ] Started System Logging Service.
[ 12.792676] input: Logitech USB Keyboard as /devices/platform/bus@f4000/f900000.cdns-usb/f400000.usb/xhci-hcd.1.auto/usb1/1-1/1-1.2/1-1.2:1.0/0003:046D:C31D.0001/input/input0
[ 12.881901] hid-generic 0003:046D:C31D.0001: input: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-xhci-hcd.1.auto-1.2/input0
[ 12.900958] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid
[ 12.918449] input: Logitech USB Keyboard Consumer Control as /devices/platform/bus@f4000/f900000.cdns-usb/f400000.usb/xhci-hcd.1.auto/usb1/1-1/1-1.2/1-1.2:1.1/0003:046D:C31D.0002/input/input1
[ 12.993576] input: Logitech USB Keyboard System Control as /devices/platform/bus@f4000/f900000.cdns-usb/f400000.usb/xhci-hcd.1.auto/usb1/1-1/1-1.2/1-1.2:1.1/0003:046D:C31D.0002/input/input2
[ 13.011240] hid-generic 0003:046D:C31D.0002: input: USB HID v1.10 Device [Logitech USB Keyboard] on usb-xhci-hcd.1.auto-1.2/input1
[ 13.116823] usb 1-1.4: new low-speed USB device number 5 using xhci-hcd
[ OK ] Started LSB: Start daemon at boot time.
[ 13.233415] input: Logitech USB Optical Mouse as /devices/platform/bus@f4000/f900000.cdns-usb/f400000.usb/xhci-hcd.1.auto/usb1/1-1/1-1.4/1-1.4:1.0/0003:046D:C05A.0003/input/input3
[ 13.251507] hid-generic 0003:046D:C05A.0003: input: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-xhci-hcd.1.auto-1.4/input0
[ OK ] Found device /dev/ttyGS0.
[ 13.826338] Mass Storage Function, version: 2009/09/11
[ 13.831580] LUN: removable file: (no medium)
[ 14.278039] Adding 423932k swap on /var/swap. Priority:-2 extents:8 across:4677632k SS
[ OK ] Finished dphys-swapfile - …mount, and delete a swap file.
[ OK ] Finished Remove Stale Onli…ext4 Metadata Check Snapshots.
[ OK ] Started User Login Management.
[ OK ] Started Avahi mDNS/DNS-SD Stack.
[ OK ] Started WPA supplicant.
[ OK ] Reached target Network.
[ OK ] Reached target Network is Online.
Starting BeagleBoard.org Code Server...
Starting Beagle Flasher Shutdown...
Starting containerd container runtime...
Starting LSB: disk temperature monitoring daemon...
Starting A high performanc… and a reverse proxy server...
Starting Permit User Sessions...
[ OK ] Finished Permit User Sessions.
[ 14.785448] wlcore: wl18xx HW: 183x or 180x, PG 2.2 (ROM 0x11)
[ 14.809543] wlcore: WARNING Detected unconfigured mac address in nvs, derive from fuse instead.
[ 14.821178] wlcore: WARNING This default nvs file can be removed from the file system
[ 14.841699] wlcore: loaded
Starting Light Display Manager...
Starting Hold until boot process finishes up...
[ OK ] Finished Beagle Flasher Shutdown.
Starting Load/Save RF Kill Switch Status...
[ OK ] Started LSB: disk temperature monitoring daemon.
[ OK ] Started Load/Save RF Kill Switch Status.
[ OK ] Started BeagleBoard.org Code Server.
Starting Authorization Manager...
[ OK ] Created slice system-wpa_supplicant.slice.
[ OK ] Started WPA supplicant dae… (interface-specific version).
Starting Access point and …rver for Wi-Fi and Ethernet...
[ 15.949411] wlcore: using inverted interrupt logic: 2
[ 16.124283] wlcore: PHY firmware version: Rev 8.2.0.0.243
[ 16.243424] wlcore: firmware booted (Rev 8.9.0.0.83)
[ 16.476979] IPv6: ADDRCONF(NETDEV_CHANGE): SoftAp0: link becomes ready
[ 18.036151] asix 1-1.1:1.0 (unnamed net_device) (uninitialized): PHY [usb-001:003:10] driver [Generic PHY] (irq=POLL)
[ 18.064028] Generic PHY usb-001:003:10: attached PHY driver (mii_bus:phy_addr=usb-001:003:10, irq=POLL)
[ 18.077603] asix 1-1.1:1.0 eth2: register 'asix' at usb-xhci-hcd.1.auto-1.1, ASIX AX88772 USB 2.0 Ethernet, 00:50:b6:09:38:52
[ 18.093999] usbcore: registered new interface driver asix
[ 18.313109] asix 1-1.1:1.0 enx0050b6093852: renamed from eth2
[FAILED] Failed to start Grow Root Partition.
Debian GNU/Linux 11 BeagleBone ttyS2
BeagleBoard.org Debian Bullseye Xfce Image 2023-04-06
Support: https://bbb.io/debian
default username:password is [debian:temppwd]
BeagleBone login: [ 23.783657] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 23.840984] Bridge firewalling registered
[ 28.290027] platform led-controller: deferred probe pending
BeagleBone login: debian
Password:
The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.
Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
Last login: Thu Apr 6 07:56:27 UTC 2023 on ttyS2
[ 39.083703] memfd_create() without MFD_EXEC nor MFD_NOEXEC_SEAL, pid=831 'systemd'
debian@BeagleBone:~$
debian@BeagleBone:~$ sudo hd -v -n 64 /sys/class/i2c-dev/i2c-0/device/0-0051/eeprom
00000000 aa 55 33 ee 01 fc 00 10 2e 00 41 4d 36 34 2d 53 |.U3.......AM64-S|
00000010 4b 45 56 4d 00 00 00 00 00 00 45 33 30 31 30 30 |KEVM......E30100|
00000020 30 31 45 33 00 00 30 31 30 31 35 31 32 31 00 00 |01E3..01015121..|
00000030 00 00 00 00 30 32 30 39 11 02 00 20 29 13 c2 00 |....0209... )...|
00000040
debian@BeagleBone:~$ sudo head /sys/kernel/debug/mmc*/ios
==> /sys/kernel/debug/mmc0/ios <==
clock: 25000000 Hz
actual clock: 25000000 Hz
vdd: 7 (1.65 - 1.95 V)
bus mode: 2 (push-pull)
chip select: 0 (don't care)
power mode: 2 (on)
bus width: 2 (4 bits)
timing spec: 0 (legacy)
signal voltage: 0 (3.30 V)
driver type: 0 (driver type B)
==> /sys/kernel/debug/mmc1/ios <==
clock: 50000000 Hz
actual clock: 50000000 Hz
vdd: 21 (3.3 ~ 3.4 V)
bus mode: 2 (push-pull)
chip select: 0 (don't care)
power mode: 2 (on)
bus width: 2 (4 bits)
timing spec: 2 (sd high-speed)
signal voltage: 0 (3.30 V)
driver type: 0 (driver type B)
debian@BeagleBone:~$ lsusb -t
/: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=xhci-hcd/1p, 5000M
/: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=xhci-hcd/1p, 480M
|__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/4p, 480M
|__ Port 1: Dev 3, If 0, Class=Vendor Specific Class, Driver=asix, 480M
|__ Port 2: Dev 4, If 1, Class=Human Interface Device, Driver=usbhid, 1.5M
|__ Port 2: Dev 4, If 0, Class=Human Interface Device, Driver=usbhid, 1.5M
|__ Port 4: Dev 5, If 0, Class=Human Interface Device, Driver=usbhid, 1.5M
debian@BeagleBone:~$ ping 192.168.0.1
PING 192.168.0.1 (192.168.0.1) 56(84) bytes of data.
64 bytes from 192.168.0.1: icmp_seq=1 ttl=64 time=0.349 ms
64 bytes from 192.168.0.1: icmp_seq=2 ttl=64 time=0.358 ms
64 bytes from 192.168.0.1: icmp_seq=3 ttl=64 time=0.330 ms
^C
--- 192.168.0.1 ping statistics ---
3 packets transmitted, 3 received, 0% packet loss, time 2033ms
rtt min/avg/max/mdev = 0.330/0.345/0.358/0.011 ms
debian@BeagleBone:~$ ip addr
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000
link/ether ac:1f:0f:84:01:31 brd ff:ff:ff:ff:ff:ff
inet 192.168.0.52/24 brd 192.168.0.255 scope global dynamic eth0
valid_lft 7132sec preferred_lft 7132sec
inet6 fe80::ae1f:fff:fe84:131/64 scope link
valid_lft forever preferred_lft forever
3: eth1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000
link/ether 70:ff:76:1d:f3:4b brd ff:ff:ff:ff:ff:ff
4: wlan0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue state DOWN group default qlen 1000
link/ether 20:d7:78:88:8a:c9 brd ff:ff:ff:ff:ff:ff
5: SoftAp0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000
link/ether 20:d7:78:88:8a:ca brd ff:ff:ff:ff:ff:ff
inet 192.168.8.1/24 brd 192.168.8.255 scope global SoftAp0
valid_lft forever preferred_lft forever
inet6 fe80::22d7:78ff:fe88:8aca/64 scope link
valid_lft forever preferred_lft forever
6: enx0050b6093852: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000
link/ether 00:50:b6:09:38:52 brd ff:ff:ff:ff:ff:ff
debian@BeagleBone:~$
Raw
am642-sk distroboot
U-Boot SPL 2023.04-00839-g256fb9e841b0-dirty (Apr 14 2023 - 01:51:09 -0500)
EEPROM not available at 0x50, trying to read at 0x51
SYSFW ABI: 3.1 (firmware rev 0x0008 '8.6.4--v08.06.04 (Chill Capybar')
SPL initial stack usage: 13360 bytes
Trying to boot from MMC2
spl_load_fit_image: Skip load 'dm': image size is 0!
Loading Environment from MMC... MMC Device 0 not found
*** Warning - No MMC card found, using default environment
Starting ATF on ARM64 core...
NOTICE: BL31: v2.8(release):v2.8-745-ga1c924df6d31
NOTICE: BL31: Built : 01:51:08, Apr 14 2023
I/TC:
I/TC: OP-TEE version: 3.21.0-rc1-1-gb031393cd781 (gcc version 12.2.1 20221205 (Arm GNU Toolchain 12.2.Rel1 (Build arm-12.24))) #1 Fri Apr 14 06:51:09 UTC 2023 aarch64
I/TC: WARNING: This OP-TEE configuration might be insecure!
I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html
I/TC: Primary CPU initializing
I/TC: SYSFW ABI: 3.1 (firmware rev 0x0008 '8.6.4--v08.06.04 (Chill Capybar')
I/TC: HUK Initialized
I/TC: Activated SA2UL device
I/TC: Fixing SA2UL firewall owner for GP device
I/TC: Enabled firewalls for SA2UL TRNG device
I/TC: SA2UL TRNG initialized
I/TC: SA2UL Drivers initialized
I/TC: Primary CPU switching to normal world boot
U-Boot SPL 2023.04-00839-g256fb9e841b0-dirty (Apr 14 2023 - 01:51:13 -0500)
SYSFW ABI: 3.1 (firmware rev 0x0008 '8.6.4--v08.06.04 (Chill Capybar')
Trying to boot from MMC2
U-Boot 2023.04-00839-g256fb9e841b0-dirty (Apr 14 2023 - 01:51:13 -0500)
SoC: AM64X SR1.0 GP
Model: Texas Instruments AM642 SK
Board: AM64-SKEVM rev E3
DRAM: 2 GiB
Core: 54 devices, 27 uclasses, devicetree: separate
MMC: mmc@fa00000: 1
Loading Environment from MMC... MMC Device 0 not found
*** Warning - No MMC card found, using default environment
In: serial@2800000
Out: serial@2800000
Err: serial@2800000
Net: eth0: ethernet@8000000port@1
Warning: ethernet@8000000port@2 MAC addresses don't match:
Address in ROM is ac:1f:0f:84:01:31
Address in environment is 70:ff:76:1d:f3:4b
, eth1: ethernet@8000000port@2
Hit any key to stop autoboot: 0
switch to partitions #0, OK
mmc1 is current device
SD/MMC found on device 1
Failed to load 'boot.scr'
Failed to load 'uEnv.txt'
starting USB...
Bus usb@f400000: Register 2000840 NbrPorts 2
Starting the controller
USB XHCI 1.00
scanning bus usb@f400000 for devices... 5 USB Device(s) found
scanning usb for storage devices... 0 Storage Device(s) found
Device 0: unknown device
switch to partitions #0, OK
mmc1 is current device
Scanning mmc 1:1...
Found /extlinux/extlinux.conf
Retrieving file: /extlinux/extlinux.conf
1: Linux microSD
Retrieving file: /Image
Retrieving file: /initrd.img
append: root=/dev/mmcblk1p2 ro rootfstype=ext4 rootwait net.ifnames=0 quiet
Retrieving file: /k3-am642-sk.dtb
## Flattened Device Tree blob at 88000000
Booting using the fdt blob at 0x88000000
Working FDT set to 88000000
Loading Ramdisk to 8f14e000, end 8ffff5c4 ... OK
Loading Device Tree to 000000008f140000, end 000000008f14d514 ... OK
Working FDT set to 8f140000
Starting kernel ...
I/TC: Secondary CPU 1 initializing
I/TC: Secondary CPU 1 switching to normal world boot
I/TC: Reserved shared memory is enabled
I/TC: Dynamic shared memory is enabled
I/TC: Normal World virtualization support is disabled
I/TC: Asynchronous notifications are disabled
[ 0.902941] debugfs: Directory 'pd:114' with parent 'pm_genpd' already present!
[ 0.943420] mmc1: error -110 whilst initialising SD card
[ OK ] Finished Tell Plymouth To Write Out Runtime Data.
[ OK ] Finished Create Volatile Files and Directories.
Starting Network Name Resolution...
Starting Network Time Synchronization...
Starting Update UTMP about System Boot/Shutdown...
[ OK ] Finished Update UTMP about System Boot/Shutdown.
[ OK ] Finished Raise network interfaces.
[ OK ] Started Network Time Synchronization.
[ OK ] Reached target System Initialization.
[ OK ] Started Daily Cleanup of Temporary Directories.
[ OK ] Reached target System Time Set.
[ OK ] Reached target System Time Synchronized.
[ OK ] Started Periodic ext4 Onli…ata Check for All Filesystems.
[ OK ] Started Discard unused blocks once a week.
[ OK ] Started Daily rotation of log files.
[ OK ] Reached target Timers.
[ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket.
[ OK ] Listening on D-Bus System Message Bus Socket.
Starting Docker Socket for the API.
[ OK ] Listening on GPS (Global P…ioning System) Daemon Sockets.
[ OK ] Listening on Docker Socket for the API.
[ OK ] Reached target Sockets.
[ OK ] Reached target Basic System.
Starting Avahi mDNS/DNS-SD Stack...
Starting BeagleBoard.org EDGEAI K3 R5...
Starting BeagleBoard Generate Symlinks...
Starting BeagleBoard.org USB gadgets...
[ OK ] Started Regular background program processing daemon.
[ OK ] Started D-Bus System Message Bus.
Starting dphys-swapfile - …unt, and delete a swap file...
Starting Remove Stale Onli…t4 Metadata Check Snapshots...
Starting Grow Root Partition...
Starting Initialize hardware monitoring sensors...
Starting System Logging Service...
Starting User Login Management...
Starting LSB: Start daemon at boot time...
Starting Disk Manager...
Starting WPA supplicant...
[FAILED] Failed to start BeagleBoard.org EDGEAI K3 R5.
See 'systemctl status bb-start-vision-apps-eaik-8-2.service' for details.
[ OK ] Listening on Load/Save RF …itch Status /dev/rfkill Watch.
[ OK ] Finished Initialize hardware monitoring sensors.
[ OK ] Finished BeagleBoard Generate Symlinks.
[ OK ] Started Network Name Resolution.
[ OK ] Reached target Host and Network Name Lookups.
[ OK ] Started System Logging Service.
[ OK ] Started LSB: Start daemon at boot time.
[ OK ] Found device /dev/ttyGS0.
[ OK ] Finished Remove Stale Onli…ext4 Metadata Check Snapshots.
[ OK ] Finished dphys-swapfile - …mount, and delete a swap file.
[ OK ] Started User Login Management.
[ OK ] Started Avahi mDNS/DNS-SD Stack.
[ OK ] Started WPA supplicant.
[ OK ] Reached target Network.
[ OK ] Reached target Network is Online.
Starting BeagleBoard.org Code Server...
Starting Beagle Flasher Shutdown...
Starting containerd container runtime...
Starting LSB: disk temperature monitoring daemon...
Starting A high performanc… and a reverse proxy server...
Starting Permit User Sessions...
[ OK ] Finished Beagle Flasher Shutdown.
Starting Load/Save RF Kill Switch Status...
[ OK ] Finished Permit User Sessions.
Starting Light Display Manager...
Starting Hold until boot process finishes up...
[ OK ] Started Load/Save RF Kill Switch Status.
[ OK ] Started LSB: disk temperature monitoring daemon.
[ OK ] Created slice system-wpa_supplicant.slice.
[ OK ] Started WPA supplicant dae… (interface-specific version).
[ OK ] Started BeagleBoard.org Code Server.
Starting Authorization Manager...
[ OK ] Started Authorization Manager.
[FAILED] Failed to start Grow Root Partition.
Debian GNU/Linux 11 BeagleBone ttyS2
BeagleBoard.org Debian Bullseye Xfce Image 2023-04-06
Support: https://bbb.io/debian
default username:password is [debian:temppwd]
BeagleBone login:
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment