654-evm

U-Boot SPL 2024.01-rc1-00120-g62fc66b6d228 (Nov 01 2023 - 10:09:21 -0500)
SYSFW ABI: 3.1 (firmware rev 0x0009 '9.1.1--v09.01.01 (Kool Koala)')
SPL initial stack usage: 1792 bytes
Trying to boot from UART
C
- 10:13:10 [INFO] Disconnected serial from am654x-idk
- 10:13:10 [INFO] Receiving primary bootloader image ...
- 10:14:30 [INFO] Connected to am654x-idk via serial 
- 10:14:30 [INFO] Target: 
Loaded 840891 bytes
Starting ATF on ARM64 core...

NOTICE:  BL31: v2.9.0(debug):v2.9.0-933-ged2d256a68c4
NOTICE:  BL31: Built : 10:09:20, Nov  1 2023
INFO:    GICv3 without legacy support detected.
INFO:    ARM GICv3 driver initialized in EL3
INFO:    Maximum SPI INTID supported: 991
INFO:    SYSFW ABI: 3.1 (firmware rev 0x0009 '9.1.1--v09.01.01 (Kool Koala)')
INFO:    BL31: Initializing runtime services
INFO:    BL31: cortex_a53: CPU workaround for erratum 855873 was applied
INFO:    BL31: cortex_a53: CPU workaround for erratum 1530924 was applied
INFO:    BL31: Initializing BL32
I/TC: 
I/TC: OP-TEE version: 4.0.0-26-g37f820d63d76 (gcc version 12.3.1 20230626 (Arm GNU Toolchain 12.3.Rel1 (Build arm-12.35))) #1 Wed Nov  1 15:09:28 UTC 2023 aarch64
I/TC: WARNING: This OP-TEE configuration might be insecure!
I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html
I/TC: Primary CPU initializing
I/TC: SYSFW ABI: 3.1 (firmware rev 0x0009 '9.1.1--v09.01.01 (Kool Koala)')
I/TC: HUK Initialized
I/TC: Activated SA2UL device
I/TC: Fixing SA2UL firewall owner for GP device
I/TC: Enabled firewalls for SA2UL TRNG device
I/TC: SA2UL TRNG initialized
I/TC: SA2UL Drivers initialized
I/TC: Primary CPU switching to normal world boot
INFO:    BL31: Preparing for EL3 exit to normal world
INFO:    Entry point address = 0x80080000
INFO:    SPSR = 0x3c9

U-Boot SPL 2024.01-rc1-00120-g62fc66b6d228 (Nov 01 2023 - 10:09:51 -0500)
SYSFW ABI: 3.1 (firmware rev 0x0009 '9.1.1--v09.01.01 (Kool Koala)')
Trying to boot from UART
C
- 10:14:30 [INFO] Disconnected serial from am654x-idk
- 10:14:30 [INFO] Receiving secondary bootloader image ...
- 10:16:22 [INFO] Connected to am654x-idk via serial 
- 10:16:22 [INFO] Host: 
- 10:21:42 [ERROR] On command:  waiting for (?-mix:(?-mix:U-Boot#)|=>) >>> error: execution expired
- 10:21:42 [INFO] Target: 
Loaded 1091819 bytes

- 10:21:42 [INFO] Disconnected serial from am654x-idk
- 10:21:42 [INFO] Connected to am654x-idk via serial 
- 10:21:42 [INFO] Host: version
- 10:21:52 [ERROR] On command: version waiting for version.+?(?-mix:(?-mix:U-Boot#)|=>) >>> error: execution expired
- 10:21:52 [INFO] Target: 

- 10:21:52 [INFO] DUT failed to boot from uart on iteration 0.

am62a7-sk

U-Boot SPL 2024.01-rc1-00120-g62fc66b6d228 (Nov 01 2023 - 10:09:21 -0500)
SYSFW ABI: 3.1 (firmware rev 0x0009 '9.1.1--v09.01.01 (Kool Koala)')
SPL initial stack usage: 13568 bytes
Trying to boot from UART
C
- 20:43:27 [INFO] Disconnected serial from am62axx_sk-fs
- 20:43:27 [INFO] Receiving primary bootloader image ...
- 20:44:50 [INFO] Connected to am62axx_sk-fs via serial 
- 20:44:51 [INFO] Target: 
Loaded 792319 bytes
Starting ATF on ARM64 core...

NOTICE:  BL31: v2.9.0(debug):v2.9.0-933-ged2d256a68c4
NOTICE:  BL31: Built : 10:09:20, Nov  1 2023
INFO:    GICv3 without legacy support detected.
INFO:    ARM GICv3 driver initialized in EL3
INFO:    Maximum SPI INTID supported: 287
INFO:    SYSFW ABI: 3.1 (firmware rev 0x0009 '9.1.1--v09.01.01 (Kool Koala)')
INFO:    BL31: Initializing runtime services
INFO:    BL31: cortex_a53: CPU workaround for erratum 855873 was applied
INFO:    BL31: cortex_a53: CPU workaround for erratum 1530924 was applied
INFO:    BL31: Initializing BL32
I/TC: 
I/TC: OP-TEE version: 4.0.0-26-g37f820d63d76 (gcc version 12.3.1 20230626 (Arm GNU Toolchain 12.3.Rel1 (Build arm-12.35))) #1 Wed Nov  1 15:09:28 UTC 2023 aarch64
I/TC: WARNING: This OP-TEE configuration might be insecure!
I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html
I/TC: Primary CPU initializing
I/TC: SYSFW ABI: 3.1 (firmware rev 0x0009 '9.1.1--v09.01.01 (Kool Koala)')
I/TC: HUK Initialized
I/TC: Primary CPU switching to normal world boot
INFO:    BL31: Preparing for EL3 exit to normal world
INFO:    Entry point address = 0x80080000
INFO:    SPSR = 0x3c9

U-Boot SPL 2024.01-rc1-00120-g62fc66b6d228 (Nov 01 2023 - 10:09:48 -0500)
SYSFW ABI: 3.1 (firmware rev 0x0009 '9.1.1--v09.01.01 (Kool Koala)')
Trying to boot from UART
C
- 20:44:51 [INFO] Disconnected serial from am62axx_sk-fs
- 20:44:51 [INFO] Receiving secondary bootloader image ...
- 20:45:51 [INFO] Connected to am62axx_sk-fs via serial 
- 20:45:51 [INFO] Host: 
- 20:51:12 [ERROR] On command:  waiting for (?-mix:(?-mix:=>)|=>) >>> error: execution expired
- 20:51:12 [INFO] Target: 
Loaded 548203 bytes

- 20:51:12 [INFO] Disconnected serial from am62axx_sk-fs
- 20:51:12 [INFO] Connected to am62axx_sk-fs via serial 
- 20:51:12 [INFO] Host: version
- 20:51:22 [ERROR] On command: version waiting for version.+?(?-mix:(?-mix:=>)|=>) >>> error: execution expired
- 20:51:22 [INFO] Target: 

- 20:51:22 [INFO] DUT failed to boot from uart on iteration 0.