Skip to content

Instantly share code, notes, and snippets.

@nmenon

nmenon/am62x-sk boot Secret

Created November 12, 2023 16:40
Show Gist options
  • Save nmenon/d62c4795c6d3d40c83ba36d1cd047c42 to your computer and use it in GitHub Desktop.
Save nmenon/d62c4795c6d3d40c83ba36d1cd047c42 to your computer and use it in GitHub Desktop.
Download ZIP
Raw
am62x-sk boot
U-Boot SPL 2024.01-rc2-00066-g7acaad9f055c (Nov 12 2023 - 10:29:10 -0600)
SYSFW ABI: 3.1 (firmware rev 0x0009 '9.1.5--v09.01.05 (Kool Koala)')
SPL initial stack usage: 13384 bytes
Trying to boot from UART
C
- 10:34:23 [INFO] Disconnected serial from am62xx-sk
- 10:34:23 [INFO] Receiving primary bootloader image ...
- 10:35:50 [INFO] Connected to am62xx-sk via serial
- 10:35:51 [INFO] Target:
Loaded 831807 bytes
Starting ATF on ARM64 core...
NOTICE: BL31: v2.9.0 (debug):v2.9.0-1048-ge7781c84e9b3
NOTICE: BL31: Built : 10:29:10, Nov 12 2023
INFO: GICv3 without legacy support detected.
INFO: ARM GICv3 driver initialized in EL3
INFO: Maximum SPI INTID supported: 287
INFO: SYSFW ABI: 3.1 (firmware rev 0x0009 '9.1.5--v09.01.05 (Kool Koala)')
INFO: BL31: Initializing runtime services
INFO: BL31: cortex_a53: CPU workaround for erratum 855873 was applied
INFO: BL31: cortex_a53: CPU workaround for erratum 1530924 was applied
ERROR: Failed to get response (-19)
ERROR: Transfer send failed (-19)
ERROR: Unable to query firmware capabilities (-19)
INFO: BL31: Initializing BL32
I/TC:
I/TC: OP-TEE version: 4.0.0-51-gce0d3a4655bd (gcc version 11.3.1 20220712 (Arm GNU Toolchain 11.3.Rel1)) #1 Sun Nov 12 16:29:18 UTC 2023 aarch64
I/TC: WARNING: This OP-TEE configuration might be insecure!
I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html
I/TC: Primary CPU initializing
I/TC: SYSFW ABI: 3.1 (firmware rev 0x0009 '9.1.5--v09.01.05 (Kool Koala)')
I/TC: HUK Initialized
I/TC: Primary CPU switching to normal world boot
INFO: BL31: Preparing for EL3 exit to normal world
INFO: Entry point address = 0x80080000
INFO: SPSR = 0x3c9
U-Boot SPL 2024.01-rc2-00066-g7acaad9f055c (Nov 12 2023 - 10:29:43 -0600)
SYSFW ABI: 3.1 (firmware rev 0x0009 '9.1.5--v09.01.05 (Kool Koala)')
SPL initial stack usage: 1808 bytes
Trying to boot from UART
C
- 10:35:51 [INFO] Disconnected serial from am62xx-sk
- 10:35:51 [INFO] Receiving secondary bootloader image ...
- 10:37:08 [INFO] Connected to am62xx-sk via serial
- 10:37:08 [INFO] Host:
- 10:37:11 [INFO] Target:
Loaded 724035 bytes
U-Boot 2024.01-rc2-00066-g7acaad9f055c (Nov 12 2023 - 10:29:43 -0600)
SoC: AM62X SR1.0 GP
Model: Texas Instruments AM625 SK
DRAM: 2 GiB
Core: 57 devices, 23 uclasses, devicetree: separate
MMC: mmc@fa10000: 0, mmc@fa00000: 1
Loading Environment from nowhere... OK
In: serial@2800000
Out: serial@2800000
Err: serial@2800000
Net: eth0: ethernet@8000000port@1
Hit any key to stop autoboot: 2 0
=>
=>
=>
=>
=>
=>
=>
=>
=>
- 10:37:11 [INFO] Disconnected serial from am62xx-sk
- 10:37:11 [INFO] Connected to am62xx-sk via serial
- 10:37:11 [INFO] Host:
- 10:37:11 [INFO] Target:
=>
- 10:37:11 [INFO] Host: version
- 10:37:12 [INFO] Target:
version
U-Boot 2024.01-rc2-00066-g7acaad9f055c (Nov 12 2023 - 10:29:43 -0600)
aarch64-none-linux-gnu-gcc (Arm GNU Toolchain 11.3.Rel1) 11.3.1 20220712
GNU ld (Arm GNU Toolchain 11.3.Rel1) 2.38.20220708
=>
- 10:37:12 [INFO] Host: setenv bootargs 'console=ttyS2,115200n8 earlyprintk=serial,ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000 rootwait fsck.mode=skip sysrq_always_enabled '
- 10:37:12 [INFO] Target:
setenv bootargs 'console=ttyS2,115200n8 earlyprintk=serial,ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000 rootwait fsck.mode=skip sysrq_always_enabled '
=>
- 10:37:12 [INFO] Host: setenv bootcmd ''
- 10:37:12 [INFO] Target:
setenv bootcmd ''
=>
- 10:37:12 [INFO] Host: setenv autoload 'no'
- 10:37:12 [INFO] Target:
setenv autoload 'no'
=>
- 10:37:12 [INFO] Host: setenv serverip '192.168.0.1'
- 10:37:12 [INFO] Target:
setenv serverip '192.168.0.1'
=>
- 10:37:12 [INFO] Host: setenv _initramfs -
- 10:37:13 [INFO] Target:
setenv _initramfs -
=>
- 10:37:13 [INFO] Host: printenv
- 10:37:13 [INFO] Target:
printenv
_initramfs=-
addr_fit=0x90000000
arch=arm
args_all=setenv optargs ${optargs} earlycon=ns16550a,mmio32,0x02800000 ${mtdparts}
args_mmc=run finduuid;setenv bootargs console=${console} ${optargs} root=PARTUUID=${uuid} rw rootfstype=${mmcrootfstype}
autoload=no
baudrate=115200
board=am62x
board_name=am62x
boot=mmc
boot_fdt=try
boot_fit=0
boot_targets=mmc1 mmc0 usb pxe dhcp
bootargs=console=ttyS2,115200n8 earlyprintk=serial,ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000 rootwait fsck.mode=skip sysrq_always_enabled
bootcmd=
bootcmd_ti_mmc=run findfdt; run init_${boot}; if test ${boot_fit} -eq 1; then run get_fit_${boot}; run get_fit_overlaystring; run run_fit; else; run get_kern_${boot}; run get_fdt_${boot}; run get_overlay_${boot}; run run_kern; fi;
bootdelay=2
bootdir=/boot
bootenvfile=uEnv.txt
bootm_size=0x10000000
bootpart=1:2
bootscript=echo Running bootscript from mmc${mmcdev} ...; source ${loadaddr}
console=ttyS2,115200n8
cpu=armv8
default_device_tree="k3-am625-sk"
default_device_tree_arch=ti
dtboaddr=0x89000000
envboot=if mmc dev ${mmcdev}; then if mmc rescan; then echo SD/MMC found on device ${mmcdev}; if test -n "${loadbootscript}" && run loadbootscript; then run bootscript; else if run loadbootenv; then echo Loaded env from ${bootenvfile}; run importbootenv; fi; if test -n $uenvcmd; then echo Running uenvcmd ...; run uenvcmd; fi; fi; fi; fi;
ethaddr=f4:84:4c:fc:92:ae
fdt_addr_r=0x88000000
fdtaddr=0x88000000
fdtcontroladdr=ffb12ba0
fdtoverlay_addr_r=0x89000000
findfdt=setenv name_fdt ${default_device_tree_arch}/${default_device_tree}.dtb; setenv fdtfile ${name_fdt}
finduuid=part uuid ${boot} ${bootpart} uuid
get_fdt_mmc=load mmc ${bootpart} ${fdtaddr} ${bootdir}/dtb/${name_fdt}
get_fit_config=setexpr name_fit_config gsub / _ conf-${fdtfile}
get_fit_mmc=load mmc ${bootpart} ${addr_fit} ${bootdir}/${name_fit}
get_fit_overlaystring=for overlay in $name_overlays; do; setexpr name_fit_overlay gsub / _ conf-${overlay}; setenv overlaystring ${overlaystring}'#'${name_fit_overlay}; done;
get_kern_mmc=load mmc ${bootpart} ${loadaddr} ${bootdir}/${name_kern}
get_overlay_mmc=fdt address ${fdtaddr}; fdt resize 0x100000; for overlay in $name_overlays; do; load mmc ${bootpart} ${dtboaddr} ${bootdir}/dtb/${overlay} && fdt apply ${dtboaddr}; done;
importbootenv=echo Importing environment from mmc${mmcdev} ...; env import -t ${loadaddr} ${filesize}
init_mmc=run args_all args_mmc
kernel_addr_r=0x82000000
loadaddr=0x82000000
loadbootenv=fatload mmc ${mmcdev} ${loadaddr} ${bootenvfile}
loadfdt=load ${devtype} ${bootpart} ${fdtaddr} ${bootdir}/dtb/${fdtfile}
loadimage=load ${devtype} ${bootpart} ${loadaddr} ${bootdir}/${bootfile}
mmcboot=if mmc dev ${mmcdev}; then devnum=${mmcdev}; devtype=mmc; if mmc rescan; then echo SD/MMC found on device ${mmcdev}; if run loadimage; then run args_mmc; if test ${boot_fit} -eq 1; then run run_fit; else run mmcloados; fi; fi; fi; fi;
mmcdev=1
mmcloados=if test ${boot_fdt} = yes || test ${boot_fdt} = try; then if run get_fdt_mmc; then bootz ${loadaddr} - ${fdtaddr}; else if test ${boot_fdt} = try; then bootz; else echo WARN: Cannot load the DT; fi; fi; else bootz; fi;
mmcrootfstype=ext4 rootwait
name_fit=fitImage
name_kern=Image
partitions=name=rootfs,start=0,size=-,uuid=${uuid_gpt_rootfs}
pxefile_addr_r=0x80100000
ramdisk_addr_r=0x88080000
rd_spec=-
rdaddr=0x88080000
run_fit=run get_fit_config; bootm ${addr_fit}#${name_fit_config}${overlaystring}
run_kern=booti ${loadaddr} ${rd_spec} ${fdtaddr}
scriptaddr=0x80000000
serverip=192.168.0.1
soc=k3
splashfile=ti_logo_414x97_32bpp.bmp.gz
splashimage=0x80200000
splashpos=m,m
splashsource=sf
stderr=serial@2800000
stdin=serial@2800000
stdout=serial@2800000
update_to_fit=setenv loadaddr ${addr_fit}; setenv bootfile ${name_fit}
vendor=ti
Environment size: 3769/126972 bytes
=>
- 10:37:13 [INFO] Host: printenv bootargs
- 10:37:13 [INFO] Target:
printenv bootargs
bootargs=console=ttyS2,115200n8 earlyprintk=serial,ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000 rootwait fsck.mode=skip sysrq_always_enabled
=>
- 10:37:13 [INFO] Host: setenv bootargs ''${bootargs}' ip=:::::eth0:dhcp '
- 10:37:14 [INFO] Target:
setenv bootargs ''${bootargs}' ip=:::::eth0:dhcp '
=>
- 10:37:14 [INFO] Host: setenv serverip '192.168.0.1'
- 10:37:14 [INFO] Target:
setenv serverip '192.168.0.1'
=>
- 10:37:14 [INFO] Host: setenv autoload 'no'
- 10:37:14 [INFO] Target:
setenv autoload 'no'
=>
- 10:37:14 [INFO] Host: dhcp
- 10:37:15 [INFO] Target:
dhcp
link up on port 1, speed 1000, full duplex
BOOTP broadcast 1
BOOTP broadcast 2
BOOTP broadcast 3
DHCP client bound to address 192.168.0.233 (1068 ms)
=>
- 10:37:15 [INFO] Host: tftp ${loadaddr} 192.168.0.1:vatf_am62xx-sk/734acea90a6c54066bbff25a10448795
- 10:37:19 [INFO] Target:
tftp ${loadaddr} 192.168.0.1:vatf_am62xx-sk/734acea90a6c54066bbff25a10448795
link up on port 1, speed 1000, full duplex
Using ethernet@8000000port@1 device
TFTP from server 192.168.0.1; our IP address is 192.168.0.233
Filename 'vatf_am62xx-sk/734acea90a6c54066bbff25a10448795'.
Load address: 0x82000000
Loading: *################################################## 40.4 MiB
11.1 MiB/s
done
Bytes transferred = 42328576 (285e200 hex)
=>
- 10:37:19 [INFO] Host: tftp ${fdt_addr_r} 192.168.0.1:vatf_am62xx-sk/54b516b688c5db6c2668116cdc861d21
- 10:37:19 [INFO] Target:
tftp ${fdt_addr_r} 192.168.0.1:vatf_am62xx-sk/54b516b688c5db6c2668116cdc861d21
link up on port 1, speed 1000, full duplex
Using ethernet@8000000port@1 device
TFTP from server 192.168.0.1; our IP address is 192.168.0.233
Filename 'vatf_am62xx-sk/54b516b688c5db6c2668116cdc861d21'.
Load address: 0x88000000
Loading: *################################################## 48.1 KiB
6.7 MiB/s
done
Bytes transferred = 49246 (c05e hex)
=>
- 10:37:19 [INFO] Host: fdt address ${fdt_addr_r}
- 10:37:19 [INFO] Target:
fdt address ${fdt_addr_r}
Working FDT set to 88000000
=>
- 10:37:19 [INFO] Host: printenv bootargs
- 10:37:20 [INFO] Target:
printenv bootargs
bootargs=console=ttyS2,115200n8 earlyprintk=serial,ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000 rootwait fsck.mode=skip sysrq_always_enabled ip=:::::eth0:dhcp
=>
- 10:37:20 [INFO] Host: setenv bootargs ''${bootargs}' root=/dev/nfs rw nfsroot=192.168.0.1:/opt/NFS_exports/linux/am62xx-sk/autofs/5b50ed8fc16d4492c177b239bf042601,nolock,v3,tcp,rsize=4096,wsize=4096 '
- 10:37:20 [INFO] Target:
setenv bootargs ''${bootargs}' root=/dev/nfs rw nfsroot=192.168.0.1:/opt/NFS_exports/linux/am62xx-sk/autofs/5b50ed8fc16d4492c177b239bf042601,nolock,v3,tcp,rsize=4096,wsize=4096 '
=>
- 10:37:20 [INFO] Host: printenv bootcmd
- 10:37:20 [INFO] Target:
printenv bootcmd
bootcmd=
=>
- 10:37:20 [INFO] Host: setenv bootcmd ''${bootcmd}' if iminfo ${loadaddr}; then bootm ${loadaddr} ${_initramfs} ${fdt_addr_r}; else booti ${loadaddr} ${_initramfs} ${fdt_addr_r}; fi'
- 10:37:20 [INFO] Target:
setenv bootcmd ''${bootcmd}' if iminfo ${loadaddr}; then bootm ${loadaddr} ${_initramfs} ${fdt_addr_r}; else booti ${loadaddr} ${_initramfs} ${fdt_addr_r}; fi'
=>
- 10:37:20 [INFO] Host: version
- 10:37:20 [INFO] Target:
version
U-Boot 2024.01-rc2-00066-g7acaad9f055c (Nov 12 2023 - 10:29:43 -0600)
aarch64-none-linux-gnu-gcc (Arm GNU Toolchain 11.3.Rel1) 11.3.1 20220712
GNU ld (Arm GNU Toolchain 11.3.Rel1) 2.38.20220708
=>
- 10:37:20 [INFO] Host: bdinfo
- 10:37:21 [INFO] Target:
bdinfo
boot_params = 0x0000000000000000
DRAM bank = 0x0000000000000000
-> start = 0x0000000080000000
-> size = 0x0000000080000000
flashstart = 0x0000000000000000
flashsize = 0x0000000000000000
flashoffset = 0x0000000000000000
baudrate = 115200 bps
relocaddr = 0x00000000fff42000
reloc off = 0x000000007f742000
Build = 64-bit
current eth = ethernet@8000000port@1
ethaddr = f4:84:4c:fc:92:ae
IP addr = 192.168.0.233
fdt_blob = 0x00000000ffb12ba0
new_fdt = 0x00000000ffb12ba0
fdt_size = 0x0000000000010200
multi_dtb_fit= 0x0000000000000000
lmb_dump_all:
memory.cnt = 0x1 / max = 0x10
memory[0] [0x80000000-0xffffffff], 0x80000000 bytes flags: 0
reserved.cnt = 0x4 / max = 0x10
reserved[0] [0x9ca00000-0x9cafffff], 0x00100000 bytes flags: 0
reserved[1] [0x9db00000-0x9e6fffff], 0x00c00000 bytes flags: 4
reserved[2] [0x9e780000-0x9fffffff], 0x01880000 bytes flags: 4
reserved[3] [0xfeb0b000-0xffffffff], 0x014f5000 bytes flags: 0
devicetree = separate
serial addr = 0x0000000002800000
width = 0x0000000000000000
shift = 0x0000000000000002
offset = 0x0000000000000000
clock = 0x0000000002dc6c00
arch_number = 0x0000000000000000
TLB addr = 0x00000000ffff0000
irq_sp = 0x00000000ffb12b90
sp start = 0x00000000ffb12b90
Early malloc usage: 2b30 / 8000
=>
- 10:37:21 [INFO] Host:
- 10:37:21 [INFO] Target:
boot_params = 0x0000000000000000
DRAM bank = 0x0000000000000000
-> start = 0x0000000080000000
-> size = 0x0000000080000000
flashstart = 0x0000000000000000
flashsize = 0x0000000000000000
flashoffset = 0x0000000000000000
baudrate = 115200 bps
relocaddr = 0x00000000fff42000
reloc off = 0x000000007f742000
Build = 64-bit
current eth = ethernet@8000000port@1
ethaddr = f4:84:4c:fc:92:ae
IP addr = 192.168.0.233
fdt_blob = 0x00000000ffb12ba0
new_fdt = 0x00000000ffb12ba0
fdt_size = 0x0000000000010200
multi_dtb_fit= 0x0000000000000000
lmb_dump_all:
memory.cnt = 0x1 / max = 0x10
memory[0] [0x80000000-0xffffffff], 0x80000000 bytes flags: 0
reserved.cnt = 0x4 / max = 0x10
reserved[0] [0x9ca00000-0x9cafffff], 0x00100000 bytes flags: 0
reserved[1] [0x9db00000-0x9e6fffff], 0x00c00000 bytes flags: 4
reserved[2] [0x9e780000-0x9fffffff], 0x01880000 bytes flags: 4
reserved[3] [0xfeb0b000-0xffffffff], 0x014f5000 bytes flags: 0
devicetree = separate
serial addr = 0x0000000002800000
width = 0x0000000000000000
shift = 0x0000000000000002
offset = 0x0000000000000000
clock = 0x0000000002dc6c00
arch_number = 0x0000000000000000
TLB addr = 0x00000000ffff0000
irq_sp = 0x00000000ffb12b90
sp start = 0x00000000ffb12b90
Early malloc usage: 2b30 / 8000
=>
- 10:37:21 [INFO] Host: ls mmc 0:1
- 10:37:21 [INFO] Target:
ls mmc 0:1
0 file(s), 0 dir(s)
=>
- 10:37:21 [INFO] Host: ls mmc 1:1
- 10:37:22 [INFO] Target:
ls mmc 1:1
EFI/
21580288 Image
291285 tiboot3-am62x-gp-evm.bin
293874 tiboot3-am62x-hs-evm.bin
293874 tiboot3-am62x-hs-fs-evm.bin
291285 tiboot3.bin
12285 ti_logo_414x97_32bpp.bmp.gz
1033743 tispl.bin
963715 u-boot.img
574 uEnv.txt
4 ws-calibrate.rules
0 test
11 file(s), 1 dir(s)
=>
- 10:37:22 [INFO] Host: ext4ls mmc 0:2 /lib/firmware
- 10:37:22 [INFO] Target:
ext4ls mmc 0:2 /lib/firmware
=>
- 10:37:22 [INFO] Host: ext4ls mmc 1:2 /lib/firmware
- 10:37:22 [INFO] Target:
ext4ls mmc 1:2 /lib/firmware
<DIR> 4096 .
<DIR> 4096 ..
2040 LICENCE.ibt_firmware
2046 LICENCE.iwlwifi_firmware
<SYM> 68 am62-main-r5f0_0-fw
<SYM> 75 am62-main-r5f0_0-fw-sec
<SYM> 68 am62-mcu-m4f0_0-fw
<SYM> 75 am62-mcu-m4f0_0-fw-sec
<SYM> 47 am62x-pru0-fw
<SYM> 47 am62x-pru1-fw
428128 bl32.bin
4093688 bl32.elf
<DIR> 4096 intel
918268 iwlwifi-3160-17.ucode
2448976 iwlwifi-8000C-34.ucode
2428004 iwlwifi-8000C-36.ucode
2440780 iwlwifi-8265-34.ucode
2436632 iwlwifi-8265-36.ucode
2678092 iwlwifi-9260-th-b0-jf-b0-34.ucode
2521412 iwlwifi-9260-th-b0-jf-b0-38.ucode
1489652 iwlwifi-9260-th-b0-jf-b0-46.ucode
<DIR> 4096 pru
4728 regulatory.db
1182 regulatory.db.p7s
114688 rgx.fw.33.15.11.3
114688 rgx.fw.33.15.11.3.64k
387960 rgx.sh.33.15.11.3
28 tee-header_v2.bin
0 tee-pageable_v2.bin
428128 tee-pager_v2.bin
428156 tee.bin
4093688 tee.elf
<DIR> 4096 ti-connectivity
<DIR> 4096 ti-ipc
=>
- 10:37:22 [INFO] Host: mmc rescan; echo $?
- 10:37:22 [INFO] Target:
mmc rescan; echo $?
0
=>
- 10:37:22 [INFO] Host: fatwrite mmc ${mmcdev}:1 ${loadaddr} ws-calibrate.rules 4
- 10:37:23 [INFO] Target:
fatwrite mmc ${mmcdev}:1 ${loadaddr} ws-calibrate.rules 4
4 bytes written in 6 ms (0 Bytes/s)
=>
- 10:37:23 [INFO] Host: boot
- 10:37:44 [INFO] Target:
boot
## Checking Image at 82000000 ...
Unknown image format!
## Flattened Device Tree blob at 88000000
Booting using the fdt blob at 0x88000000
Working FDT set to 88000000
Loading Device Tree to 000000008fff0000, end 000000008ffff05d ... OK
Working FDT set to 8fff0000
Starting kernel ...
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[ 0.000000] Linux version 6.6.0-next-20231109 (KernelCI@build-j10249-arm64-gcc-10-defconfig-kpjbp) (aarch64-linux-gnu-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP PREEMPT Thu Nov 9 06:55:16 UTC 2023
[ 0.000000] KASLR disabled due to lack of seed
[ 0.000000] Machine model: Texas Instruments AM625 SK
[ 0.000000] earlycon: ns16550a0 at MMIO32 0x0000000002800000 (options '')
[ 0.000000] printk: legacy bootconsole [ns16550a0] enabled
[ 0.000000] efi: UEFI not found.
[ 0.000000] OF: reserved mem: 0x000000009ca00000..0x000000009cafffff (1024 KiB) map non-reusable ramoops@9ca00000
[ 0.000000] Reserved memory: created DMA memory pool at 0x000000009db00000, size 12 MiB
[ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@9db00000, compatible id shared-dma-pool
[ 0.000000] OF: reserved mem: 0x000000009db00000..0x000000009e6fffff (12288 KiB) nomap non-reusable r5f-dma-memory@9db00000
[ 0.000000] OF: reserved mem: 0x000000009e780000..0x000000009e7fffff (512 KiB) nomap non-reusable tfa@9e780000
[ 0.000000] OF: reserved mem: 0x000000009e800000..0x000000009fffffff (24576 KiB) nomap non-reusable optee@9e800000
[ 0.000000] NUMA: No NUMA configuration found
[ 0.000000] NUMA: Faking a node at [mem 0x0000000080000000-0x00000000ffffffff]
[ 0.000000] NUMA: NODE_DATA [mem 0xffbd29c0-0xffbd4fff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff]
[ 0.000000] DMA32 empty
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000080000000-0x000000009dafffff]
[ 0.000000] node 0: [mem 0x000000009db00000-0x000000009e6fffff]
[ 0.000000] node 0: [mem 0x000000009e700000-0x000000009e77ffff]
[ 0.000000] node 0: [mem 0x000000009e780000-0x000000009fffffff]
[ 0.000000] node 0: [mem 0x00000000a0000000-0x00000000ffffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x00000000ffffffff]
[ 0.000000] cma: Reserved 32 MiB at 0x00000000fba00000 on node -1
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.1 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: Trusted OS migration not required
[ 0.000000] psci: SMC Calling Convention v1.4
[ 0.000000] percpu: Embedded 22 pages/cpu s50664 r8192 d31256 u90112
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] CPU features: detected: GIC system register CPU interface
[ 0.000000] CPU features: detected: ARM erratum 845719
[ 0.000000] alternatives: applying boot alternatives
[ 0.000000] Kernel command line: console=ttyS2,115200n8 earlyprintk=serial,ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000 rootwait fsck.mode=skip sysrq_always_enabled ip=:::::eth0:dhcp root=/dev/nfs rw nfsroot=192.168.0.1:/opt/NFS_exports/linux/am62xx-sk/autofs/5b50ed8fc16d4492c177b239bf042601,nolock,v3,tcp,rsize=4096,wsize=4096
[ 0.000000] sysrq: sysrq always enabled.
[ 0.000000] Unknown kernel command line parameters "earlyprintk=serial,ttyS2,115200n8", will be passed to user space.
[ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.000000] Fallback order for Node 0: 0
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 516096
[ 0.000000] Policy zone: DMA
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] software IO TLB: SWIOTLB bounce buffer size adjusted to 2MB
[ 0.000000] software IO TLB: area num 4.
[ 0.000000] software IO TLB: mapped [mem 0x00000000fb600000-0x00000000fb800000] (2MB)
[ 0.000000] Memory: 1941412K/2097152K available (16640K kernel code, 4344K rwdata, 10816K rodata, 9408K init, 605K bss, 122972K reserved, 32768K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000] rcu: RCU event tracing is enabled.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[ 0.000000] Trampoline variant of Tasks RCU enabled.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[ 0.000000] GICv3: 256 SPIs implemented
[ 0.000000] GICv3: 0 Extended SPIs implemented
[ 0.000000] Root IRQ handler: gic_handle_irq
[ 0.000000] GICv3: GICv3 features: 16 PPIs
[ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000001880000
[ 0.000000] ITS [mem 0x01820000-0x0182ffff]
[ 0.000000] GIC: enabling workaround for ITS: Socionext Synquacer pre-ITS
[ 0.000000] ITS@0x0000000001820000: Devices Table too large, reduce ids 20->19
[ 0.000000] ITS@0x0000000001820000: allocated 524288 Devices @80800000 (flat, esz 8, psz 64K, shr 0)
[ 0.000000] ITS: using cache flushing for cmd queue
[ 0.000000] GICv3: using LPI property table @0x0000000080040000
[ 0.000000] GIC: using cache flushing for LPI property table
[ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x0000000080050000
[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.000000] arch_timer: cp15 timer(s) running at 200.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0x3ffffffffffffff max_cycles: 0x2e2049d3e8, max_idle_ns: 440795210634 ns
[ 0.000000] sched_clock: 58 bits at 200MHz, resolution 5ns, wraps every 4398046511102ns
[ 0.009635] Console: colour dummy device 80x25
[ 0.014274] Calibrating delay loop (skipped), value calculated using timer frequency.. 400.00 BogoMIPS (lpj=800000)
[ 0.024961] pid_max: default: 32768 minimum: 301
[ 0.029757] LSM: initializing lsm=capability,integrity
[ 0.035135] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[ 0.042721] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[ 0.052732] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
[ 0.060064] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
[ 0.068073] rcu: Hierarchical SRCU implementation.
[ 0.072980] rcu: Max phase no-delay instances is 1000.
[ 0.078613] Platform MSI: msi-controller@1820000 domain created
[ 0.084911] PCI/MSI: /bus@f0000/interrupt-controller@1800000/msi-controller@1820000 domain created
[ 0.094193] fsl-mc MSI: msi-controller@1820000 domain created
[ 0.102000] EFI services will not be available.
[ 0.106944] smp: Bringing up secondary CPUs ...
I/TC: Secondary CPU 1 initializing
I/TC: Secondary CPU 1 switching to normal world boot
I/TC: Secondary CPU 2 initializing
I/TC: Secondary CPU 2 switching to normal world boot
I/TC: Secondary CPU 3 initializing
I/TC: Secondary CPU 3 switching to normal world boot
[ 0.120327] Detected VIPT I-cache on CPU1
[ 0.120417] GICv3: CPU1: found redistributor 1 region 0:0x00000000018a0000
[ 0.120435] GICv3: CPU1: using allocated LPI pending table @0x0000000080060000
[ 0.120496] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
[ 0.129301] Detected VIPT I-cache on CPU2
[ 0.129368] GICv3: CPU2: found redistributor 2 region 0:0x00000000018c0000
[ 0.129383] GICv3: CPU2: using allocated LPI pending table @0x0000000080070000
[ 0.129422] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
[ 0.138140] Detected VIPT I-cache on CPU3
[ 0.138206] GICv3: CPU3: found redistributor 3 region 0:0x00000000018e0000
[ 0.138219] GICv3: CPU3: using allocated LPI pending table @0x0000000080080000
[ 0.138253] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
[ 0.138334] smp: Brought up 1 node, 4 CPUs
[ 0.218052] SMP: Total of 4 processors activated.
[ 0.222865] CPU features: detected: 32-bit EL0 Support
[ 0.228130] CPU features: detected: 32-bit EL1 Support
[ 0.233387] CPU features: detected: CRC32 instructions
[ 0.244358] CPU: All CPU(s) started at EL2
[ 0.248638] alternatives: applying system-wide alternatives
[ 0.256797] devtmpfs: initialized
[ 0.268315] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.278320] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.286673] pinctrl core: initialized pinctrl subsystem
[ 0.294382] DMI not present or invalid.
[ 0.299281] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.306495] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations
[ 0.313938] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.322127] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.330521] audit: initializing netlink subsys (disabled)
[ 0.336313] audit: type=2000 audit(0.216:1): state=initialized audit_enabled=0 res=1
[ 0.337839] thermal_sys: Registered thermal governor 'step_wise'
[ 0.344255] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.350484] cpuidle: using governor menu
[ 0.361487] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.368532] ASID allocator initialised with 65536 entries
[ 0.376453] Serial: AMBA PL011 UART driver
[ 0.405267] Modules: 22272 pages in range for non-PLT usage
[ 0.405288] Modules: 513792 pages in range for PLT usage
[ 0.411884] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.424279] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page
[ 0.430689] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages
[ 0.437629] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page
[ 0.444037] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.450976] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page
[ 0.457384] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages
[ 0.464323] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page
[ 0.472697] ACPI: Interpreter disabled.
[ 0.479093] k3-chipinfo 43000014.chipid: Family:AM62X rev:SR1.0 JTAGID[0x0bb7e02f] Detected
[ 0.488631] iommu: Default domain type: Translated
[ 0.493562] iommu: DMA domain TLB invalidation policy: strict mode
[ 0.500200] SCSI subsystem initialized
[ 0.504417] usbcore: registered new interface driver usbfs
[ 0.510060] usbcore: registered new interface driver hub
[ 0.515521] usbcore: registered new device driver usb
[ 0.522008] pps_core: LinuxPPS API ver. 1 registered
[ 0.527092] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.536443] PTP clock support registered
[ 0.540634] EDAC MC: Ver: 3.0.0
[ 0.544689] scmi_core: SCMI protocol bus registered
[ 0.550884] FPGA manager framework
[ 0.554492] Advanced Linux Sound Architecture Driver Initialized.
[ 0.561906] vgaarb: loaded
[ 0.565750] clocksource: Switched to clocksource arch_sys_counter
[ 0.572322] VFS: Disk quotas dquot_6.6.0
[ 0.576369] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.583612] pnp: PnP ACPI: disabled
[ 0.593781] NET: Registered PF_INET protocol family
[ 0.599053] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.608237] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear)
[ 0.617051] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.624990] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.633205] TCP bind hash table entries: 16384 (order: 7, 524288 bytes, linear)
[ 0.641212] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.648130] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear)
[ 0.655062] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear)
[ 0.662576] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.668905] RPC: Registered named UNIX socket transport module.
[ 0.674990] RPC: Registered udp transport module.
[ 0.679800] RPC: Registered tcp transport module.
[ 0.684609] RPC: Registered tcp-with-tls transport module.
[ 0.690217] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.696820] PCI: CLS 0 bytes, default 64
[ 0.701333] kvm [1]: IPA Size Limit: 40 bits
[ 0.707896] kvm [1]: vgic-v2@100010000
[ 0.711760] kvm [1]: GIC system register CPU interface enabled
[ 0.717792] kvm [1]: vgic interrupt IRQ9
[ 0.721827] kvm [1]: Hyp mode initialized successfully
[ 0.728635] Initialise system trusted keyrings
[ 0.733494] workingset: timestamp_bits=42 max_order=19 bucket_order=0
[ 0.740465] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.746750] NFS: Registering the id_resolver key type
[ 0.751955] Key type id_resolver registered
[ 0.756234] Key type id_legacy registered
[ 0.760354] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 0.767211] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
[ 0.774996] 9p: Installing v9fs 9p2000 file system support
[ 0.833833] Key type asymmetric registered
[ 0.838028] Asymmetric key parser 'x509' registered
[ 0.843087] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
[ 0.850655] io scheduler mq-deadline registered
[ 0.855289] io scheduler kyber registered
[ 0.859423] io scheduler bfq registered
[ 0.872613] pinctrl-single 4084000.pinctrl: 34 pins, size 136
[ 0.878973] pinctrl-single f4000.pinctrl: 171 pins, size 684
[ 0.894164] EINJ: ACPI disabled.
[ 0.930757] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.942319] msm_serial: driver initialized
[ 0.947014] SuperH (H)SCI(F) driver initialized
[ 0.951907] STM32 USART driver initialized
[ 0.965556] loop: module loaded
[ 0.970537] megasas: 07.727.03.00-rc1
[ 0.983248] tun: Universal TUN/TAP device driver, 1.6
[ 0.989990] thunder_xcv, ver 1.0
[ 0.993345] thunder_bgx, ver 1.0
[ 0.996675] nicpf, ver 1.0
[ 1.001051] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version
[ 1.008453] hns3: Copyright (c) 2017 Huawei Corporation.
[ 1.013931] hclge is initializing
[ 1.017365] e1000: Intel(R) PRO/1000 Network Driver
[ 1.022444] e1000: Copyright (c) 1999-2006 Intel Corporation.
[ 1.028386] e1000e: Intel(R) PRO/1000 Network Driver
[ 1.033466] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 1.039543] igb: Intel(R) Gigabit Ethernet Network Driver
[ 1.045066] igb: Copyright (c) 2007-2014 Intel Corporation.
[ 1.050786] igbvf: Intel(R) Gigabit Virtual Function Network Driver
[ 1.057196] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
[ 1.063928] sky2: driver version 1.30
[ 1.069635] VFIO - User Level meta-driver version: 0.3
[ 1.079110] usbcore: registered new interface driver usb-storage
[ 1.089282] i2c_dev: i2c /dev entries driver
[ 1.106428] sdhci: Secure Digital Host Controller Interface driver
[ 1.112798] sdhci: Copyright(c) Pierre Ossman
[ 1.118544] Synopsys Designware Multimedia Card Interface Driver
[ 1.126135] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.135023] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.142380] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping ....
[ 1.150373] usbcore: registered new interface driver usbhid
[ 1.156098] usbhid: USB HID core driver
[ 1.165363] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
[ 1.177005] optee: probing for conduit method.
I/TC: Reserved shared memory is enabled
I/TC: Dynamic shared memory is enabled
I/TC: Normal World virtualization support is disabled
I/TC: Asynchronous notifications are disabled
[ 1.181630] optee: revision 4.0 (ce0d3a46)
[ 1.198302] optee: dynamic shared memory is enabled
[ 1.207757] optee: initialized driver
[ 1.216600] NET: Registered PF_PACKET protocol family
[ 1.221926] 9pnet: Installing 9P2000 support
[ 1.226386] Key type dns_resolver registered
[ 1.240890] registered taskstats version 1
[ 1.245891] Loading compiled-in X.509 certificates
[ 1.317344] ti-sci 44043000.system-controller: ABI: 3.1 (firmware rev 0x0009 '9.1.5--v09.01.05 (Kool Koala)')
[ 1.410540] omap_i2c 20000000.i2c: bus 0 rev0.12 at 400 kHz
[ 1.418579] i2c 1-003b: Fixed dependency cycle(s) with /connector-hdmi/port/endpoint
[ 1.426558] i2c 1-003b: Fixed dependency cycle(s) with /bus@f0000/dss@30200000/ports/port@1/endpoint
[ 1.436318] omap_i2c 20010000.i2c: bus 1 rev0.12 at 100 kHz
[ 1.443237] ti-sci-intr 4210000.interrupt-controller: Interrupt Router 5 domain created
[ 1.452101] ti-sci-intr bus@f0000:interrupt-controller@a00000: Interrupt Router 3 domain created
[ 1.461794] ti-sci-inta 48000000.interrupt-controller: Interrupt Aggregator domain 28 created
[ 1.474931] ti-udma 485c0100.dma-controller: Number of rings: 82
[ 1.483935] ti-udma 485c0100.dma-controller: Channels: 48 (bchan: 18, tchan: 12, rchan: 18)
[ 1.496922] ti-udma 485c0000.dma-controller: Number of rings: 150
[ 1.508313] ti-udma 485c0000.dma-controller: Channels: 35 (tchan: 20, rchan: 15)
[ 1.521099] printk: legacy console [ttyS2] disabled
[ 1.526528] 2800000.serial: ttyS2 at MMIO 0x2800000 (irq = 236, base_baud = 3000000) is a 8250
[ 1.535427] printk: legacy console [ttyS2] enabled
[ 1.535427] printk: legacy console [ttyS2] enabled
[ 1.545153] printk: legacy bootconsole [ns16550a0] disabled
[ 1.545153] printk: legacy bootconsole [ns16550a0] disabled
[ 1.563706] spi-nor spi0.0: s28hs512t (65536 Kbytes)
[ 1.569506] 7 fixed-partitions partitions found on MTD device fc40000.spi.0
[ 1.576497] Creating 7 MTD partitions on "fc40000.spi.0":
[ 1.581903] 0x000000000000-0x000000080000 : "ospi.tiboot3"
[ 1.588858] 0x000000080000-0x000000280000 : "ospi.tispl"
[ 1.595476] 0x000000280000-0x000000680000 : "ospi.u-boot"
[ 1.602183] 0x000000680000-0x0000006c0000 : "ospi.env"
[ 1.608500] 0x0000006c0000-0x000000700000 : "ospi.env.backup"
[ 1.615427] 0x000000800000-0x000003fc0000 : "ospi.rootfs"
[ 1.622044] 0x000003fc0000-0x000004000000 : "ospi.phypattern"
[ 1.635009] davinci_mdio 8000f00.mdio: Configuring MDIO in manual mode
[ 1.681796] davinci_mdio 8000f00.mdio: davinci mdio revision 9.7, bus freq 1000000
[ 1.694150] davinci_mdio 8000f00.mdio: phy[0]: device 8000f00.mdio:00, driver TI DP83867
[ 1.702257] davinci_mdio 8000f00.mdio: phy[1]: device 8000f00.mdio:01, driver TI DP83867
[ 1.710383] am65-cpsw-nuss 8000000.ethernet: initializing am65 cpsw nuss version 0x6BA01103, cpsw version 0x6BA81103 Ports: 3 quirks:00000002
[ 1.723342] am65-cpsw-nuss 8000000.ethernet: Use random MAC address
[ 1.729611] am65-cpsw-nuss 8000000.ethernet: initialized cpsw ale version 1.5
[ 1.736737] am65-cpsw-nuss 8000000.ethernet: ALE Table size 512
[ 1.745268] am65-cpsw-nuss 8000000.ethernet: set new flow-id-base 19
[ 1.827154] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 1.832748] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
[ 1.840607] xhci-hcd xhci-hcd.0.auto: USB3 root hub has no ports
[ 1.846611] xhci-hcd xhci-hcd.0.auto: hcc params 0x0258fe6d hci version 0x110 quirks 0x0000000000000010
[ 1.856050] xhci-hcd xhci-hcd.0.auto: irq 239, io mem 0x31100000
[ 1.863324] hub 1-0:1.0: USB hub found
[ 1.867158] hub 1-0:1.0: 1 port detected
[ 1.874267] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1200000 KHz, changing to: 1250000 KHz
[ 1.892551] mmc0: CQHCI version 5.10
[ 1.909617] pca953x 1-0022: supply vcc not found, using dummy regulator
[ 1.916403] pca953x 1-0022: using AI
[ 1.936445] mmc0: SDHCI controller on fa10000.mmc [fa10000.mmc] using ADMA 64-bit
[ 1.965702] mmc1: CQHCI version 5.10
[ 2.010308] mmc1: SDHCI controller on fa00000.mmc [fa00000.mmc] using ADMA 64-bit
[ 2.030125] mmc0: Command Queue Engine enabled
[ 2.034624] mmc0: new HS200 MMC card at address 0001
[ 2.037437] am65-cpsw-nuss 8000000.ethernet eth0: PHY [8000f00.mdio:00] driver [TI DP83867] (irq=POLL)
[ 2.040599] mmcblk0: mmc0:0001 S0J56X 14.8 GiB
[ 2.048990] am65-cpsw-nuss 8000000.ethernet eth0: configuring for phy/rgmii-rxid link mode
[ 2.061769] mmcblk0: p1 p2
[ 2.065282] mmcblk0boot0: mmc0:0001 S0J56X 31.5 MiB
[ 2.071407] mmcblk0boot1: mmc0:0001 S0J56X 31.5 MiB
[ 2.077334] mmcblk0rpmb: mmc0:0001 S0J56X 4.00 MiB, chardev (234:0)
[ 2.092667] mmc1: new ultra high speed SDR104 SDHC card at address aaaa
[ 2.100234] mmcblk1: mmc1:aaaa SH32G 29.7 GiB
[ 2.106960] mmcblk1: p1 p2 p3
[ 2.129787] usb 1-1: new high-speed USB device number 2 using xhci-hcd
[ 2.300978] usb-storage 1-1:1.0: USB Mass Storage device detected
[ 2.308498] scsi host0: usb-storage 1-1:1.0
[ 3.329401] scsi 0:0:0:0: Direct-Access Kingston DataTraveler 2.0 PMAP PQ: 0 ANSI: 6
[ 3.339120] sd 0:0:0:0: [sda] 30240768 512-byte logical blocks: (15.5 GB/14.4 GiB)
[ 3.347155] sd 0:0:0:0: [sda] Write Protect is off
[ 3.352685] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 3.473947] sda: sda1
[ 3.477064] sd 0:0:0:0: [sda] Attached SCSI removable disk
[ 6.143564] am65-cpsw-nuss 8000000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[ 6.173847] Sending DHCP requests ., OK
[ 6.193949] IP-Config: Got DHCP answer from 192.168.0.1, my address is 192.168.0.233
[ 6.201830] IP-Config: Complete:
[ 6.205075] device=eth0, hwaddr=f4:84:4c:fc:92:ae, ipaddr=192.168.0.233, mask=255.255.255.0, gw=192.168.0.1
[ 6.215339] host=192.168.0.233, domain=ti.com, nis-domain=(none)
[ 6.221846] bootserver=192.168.0.1, rootserver=192.168.0.1, rootpath=
[ 6.221881] nameserver0=192.0.2.2, nameserver1=192.0.2.3
[ 6.235311] clk: Disabling unused clocks
[ 6.259431] ALSA device list:
[ 6.262538] No soundcards found.
[ 6.309664] VFS: Mounted root (nfs filesystem) on device 0:21.
[ 6.316053] devtmpfs: mounted
[ 6.325370] Freeing unused kernel memory: 9408K
[ 6.337831] Run /sbin/init as init process
[ 6.517113] systemd[1]: System time before build time, advancing clock.
[ 6.569611] NET: Registered PF_INET6 protocol family
[ 6.580740] Segment Routing with IPv6
[ 6.584528] In-situ OAM (IOAM) with IPv6
[ 6.625083] systemd[1]: systemd 250.5+ running in system mode (+PAM -AUDIT -SELINUX -APPARMOR +IMA -SMACK +SECCOMP -GCRYPT -GNUTLS -OPENSSL +ACL +BLKID -CURL -ELFUTILS -FIDO2 -IDN2 -IDN -IPTC +KMOD -LIBCRYPTSETUP +LIBFDISK -PCRE2 -PWQUALITY -P11KIT -QRENCODE -BZIP2 -LZ4 -XZ -ZLIB +ZSTD -BPF_FRAMEWORK +XKBCOMMON +UTMP +SYSVINIT default-hierarchy=hybrid)
[ 6.657104] systemd[1]: Detected architecture arm64.
Welcome to [1mArago 2023.04[0m!
[ 6.748091] systemd[1]: Hostname set to <am65xx-evm>.
[ 6.888373] systemd[95]: /lib/systemd/system-generators/systemd-gpt-auto-generator failed with exit status 1.
[ 6.891122] systemd-sysv-generator[104]: SysV service '/etc/init.d/netopeer2-server' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
[ 6.926365] systemd-sysv-generator[104]: SysV service '/etc/init.d/sysrepo' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
[ 6.951074] systemd-sysv-generator[104]: SysV service '/etc/init.d/thermal-zone-init' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
[ 7.680479] systemd[1]: /lib/systemd/system/bt-enable.service:9: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether.
[ 7.802244] systemd[1]: /etc/systemd/system/sync-clocks.service:11: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether.
[ 7.950561] systemd[1]: Queued start job for default target Graphical Interface.
[ 8.061554] systemd[1]: Created slice Slice /system/getty.
[[0;32m OK [0m] Created slice [0;1;39mSlice /system/getty[0m.
[ 8.085131] systemd[1]: Created slice Slice /system/modprobe.
[[0;32m OK [0m] Created slice [0;1;39mSlice /system/modprobe[0m.
[ 8.109370] systemd[1]: Created slice Slice /system/serial-getty.
[[0;32m OK [0m] Created slice [0;1;39mSlice /system/serial-getty[0m.
[ 8.132780] systemd[1]: Created slice User and Session Slice.
[[0;32m OK [0m] Created slice [0;1;39mUser and Session Slice[0m.
[ 8.154435] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[[0;32m OK [0m] Started [0;1;39mDispatch Password ts to Console Directory Watch[0m.
[ 8.178489] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[[0;32m OK [0m] Started [0;1;39mForward Password Ruests to Wall Directory Watch[0m.
[ 8.202593] systemd[1]: Reached target Path Units.
[[0;32m OK [0m] Reached target [0;1;39mPath Units[0m.
[ 8.222043] systemd[1]: Reached target Remote File Systems.
[[0;32m OK [0m] Reached target [0;1;39mRemote File Systems[0m.
[ 8.242175] systemd[1]: Reached target Slice Units.
[[0;32m OK [0m] Reached target [0;1;39mSlice Units[0m.
[ 8.262078] systemd[1]: Reached target Swaps.
[[0;32m OK [0m] Reached target [0;1;39mSwaps[0m.
[ 8.331547] systemd[1]: Listening on RPCbind Server Activation Socket.
[[0;32m OK [0m] Listening on [0;1;39mRPCbind Server Activation Socket[0m.
[ 8.358358] systemd[1]: Reached target RPC Port Mapper.
[[0;32m OK [0m] Reached target [0;1;39mRPC Port Mapper[0m.
[ 8.398037] systemd[1]: Listening on Process Core Dump Socket.
[[0;32m OK [0m] Listening on [0;1;39mProcess Core Dump Socket[0m.
[ 8.422905] systemd[1]: Listening on initctl Compatibility Named Pipe.
[[0;32m OK [0m] Listening on [0;1;39minitctl Compatibility Named Pipe[0m.
[ 8.448811] systemd[1]: Listening on Journal Audit Socket.
[[0;32m OK [0m] Listening on [0;1;39mJournal Audit Socket[0m.
[ 8.474040] systemd[1]: Listening on Journal Socket (/dev/log).
[[0;32m OK [0m] Listening on [0;1;39mJournal Socket (/dev/log)[0m.
[ 8.499588] systemd[1]: Listening on Journal Socket.
[[0;32m OK [0m] Listening on [0;1;39mJournal Socket[0m.
[ 8.526992] systemd[1]: Listening on Network Service Netlink Socket.
[[0;32m OK [0m] Listening on [0;1;39mNetwork Service Netlink Socket[0m.
[ 8.556468] systemd[1]: Listening on udev Control Socket.
[[0;32m OK [0m] Listening on [0;1;39mudev Control Socket[0m.
[ 8.580223] systemd[1]: Listening on udev Kernel Socket.
[[0;32m OK [0m] Listening on [0;1;39mudev Kernel Socket[0m.
[ 8.605505] systemd[1]: Listening on User Database Manager Socket.
[[0;32m OK [0m] Listening on [0;1;39mUser Database Manager Socket[0m.
[ 8.674464] systemd[1]: Mounting Huge Pages File System...
Mounting [0;1;39mHuge Pages File System[0m...
[ 8.704990] systemd[1]: Mounting POSIX Message Queue File System...
Mounting [0;1;39mPOSIX Message Queue File System[0m...
[ 8.737925] systemd[1]: Mounting Kernel Debug File System...
Mounting [0;1;39mKernel Debug File System[0m...
[ 8.759305] systemd[1]: Kernel Trace File System was skipped because of a failed condition check (ConditionPathExists=/sys/kernel/tracing).
[ 8.806493] systemd[1]: Mounting Temporary Directory /tmp...
Mounting [0;1;39mTemporary Directory /tmp[0m...
[ 8.844417] systemd[1]: Starting Create List of Static Device Nodes...
Starting [0;1;39mCreate List of Static Device Nodes[0m...
[ 8.874542] systemd[1]: Starting Load Kernel Module configfs...
Starting [0;1;39mLoad Kernel Module configfs[0m...
[ 8.931112] systemd[1]: Starting Load Kernel Module drm...
Starting [0;1;39mLoad Kernel Module drm[0m...
[ 8.963585] systemd[1]: Starting Load Kernel Module fuse...
Starting [0;1;39mLoad Kernel Module fuse[0m...
[ 8.991248] systemd[1]: Starting Start psplash boot splash screen...
[ 8.998274] fuse: init (API version 7.39)
Starting [0;1;39mStart psplash boot splash screen[0m...
[ 9.050802] systemd[1]: Starting RPC Bind...
Starting [0;1;39mRPC Bind[0m...
[ 9.070916] systemd[1]: File System Check on Root Device was skipped because of a failed condition check (ConditionPathIsReadWrite=!/).
[ 9.093032] systemd[1]: Starting Journal Service...
Starting [0;1;39mJournal Service[0m...
[ 9.124858] systemd[1]: Starting Load Kernel Modules...
Starting [0;1;39mLoad Kernel Modules[0m...
[ 9.149181] systemd[1]: Starting Generate network units from Kernel command line...
Starting [0;1;39mGenerate network ts from Kernel command line[0m...
[ 9.180940] systemd[1]: Starting Remount Root and Kernel File Systems...
Starting [0;1;39mRemount Root and Kernel File Systems[0m...
[ 9.219618] systemd[1]: Starting Coldplug All udev Devices...
Starting [0;1;39mColdplug All udev Devices[0m...
[ 9.249596] systemd[1]: Started RPC Bind.
[[0;32m OK [0m] Started [0;1;39mRPC Bind[0m.
[ 9.267249] systemd[1]: Started Journal Service.
[[0;32m OK [0m] Started [0;1;39mJournal Service[0m.
[[0;32m OK [0m] Mounted [0;1;39mHuge Pages File System[0m.
[[0;32m OK [0m] Mounted [0;1;39mPOSIX Message Queue File System[0m.
[[0;32m OK [0m] Mounted [0;1;39mKernel Debug File System[0m.
[[0;32m OK [0m] Mounted [0;1;39mTemporary Directory /tmp[0m.
[[0;32m OK [0m] Finished [0;1;39mCreate List of Static Device Nodes[0m.
[[0;32m OK [0m] Finished [0;1;39mLoad Kernel Module configfs[0m.
[[0;32m OK [0m] Finished [0;1;39mLoad Kernel Module drm[0m.
[[0;32m OK [0m] Finished [0;1;39mLoad Kernel Module fuse[0m.
[[0;1;31mFAILED[0m] Failed to start [0;1;39mStart psplash boot splash screen[0m.
See 'systemctl status psplash-start.service' for details.
[[0;1;38;5;185mDEPEND[0m] Dependency failed for [0;1;39mStarprogress communication helper[0m.
[[0;32m OK [0m] Finished [0;1;39mLoad Kernel Modules[0m.
[[0;32m OK [0m] Finished [0;1;39mGenerate network units from Kernel command line[0m.
[[0;32m OK [0m] Finished [0;1;39mRemount Root and Kernel File Systems[0m.
Mounting [0;1;39mFUSE Control File System[0m...
Mounting [0;1;39mKernel Configuration File System[0m...
Starting [0;1;39mFlush Journal to Persistent Storage[0m...
Starting [0;1;39mApply Kernel Variables[0m...
[ 9.689631] systemd-journald[119]: Received client request to flush runtime journal.
Starting [0;1;39mCreate Static Device Nodes in /dev[0m...
[[0;32m OK [0m] Mounted [0;1;39mFUSE Control File System[0m.
[[0;32m OK [0m] Mounted [0;1;39mKernel Configuration File System[0m.
[[0;32m OK [0m] Finished [0;1;39mFlush Journal to Persistent Storage[0m.
[[0;32m OK [0m] Finished [0;1;39mApply Kernel Variables[0m.
[[0;32m OK [0m] Finished [0;1;39mCreate Static Device Nodes in /dev[0m.
[[0;32m OK [0m] Reached target [0;1;39mPreparation for Local File Systems[0m.
Mounting [0;1;39m/media/ram[0m...
Mounting [0;1;39m/var/volatile[0m...
[ 9.911373] audit: type=1334 audit(1651167748.392:2): prog-id=5 op=LOAD
[ 9.918303] audit: type=1334 audit(1651167748.400:3): prog-id=6 op=LOAD
Starting [0;1;39mRule-based Managefor Device Events and Files[0m...
[[0;32m OK [0m] Mounted [0;1;39m/media/ram[0m.
[[0;32m OK [0m] Mounted [0;1;39m/var/volatile[0m.
Starting [0;1;39mLoad/Save Random Seed[0m...
[[0;32m OK [0m] Reached target [0;1;39mLocal File Systems[0m.
Starting [0;1;39mCreate Volatile Files and Directories[0m...
[[0;32m OK [0m] Finished [0;1;39mColdplug All udev Devices[0m.
[[0;32m OK [0m] Started [0;1;39mRule-based Manager for Device Events and Files[0m.
[ 10.285820] random: crng init done
[[0;32m OK [0m] Finished [0;1;39mLoad/Save Random Seed[0m.
[[0;32m OK [0m] Finished [0;1;39mCreate Volatile Files and Directories[0m.
Starting [0;1;39mNetwork Time Synchronization[0m...
Starting [0;1;39mRecord System Boot/Shutdown in UTMP[0m...
[[0;32m OK [0m] Finished [0;1;39mRecord System Boot/Shutdown in UTMP[0m.
[ 10.845250] systemd-journald[119]: Oldest entry in /run/log/journal/85e864222d184411b10fe655b5fb36fe/system.journal is older than the configured file retention duration (1month), suggesting rotation.
[[0;32m OK [0m] Started [0;1;39mNetwork Time Synchronizatio[ 10.863843] systemd-journald[119]: /run/log/journal/85e864222d184411b10fe655b5fb36fe/system.journal: Journal header limits reached or header out-of-date, rotating.
n[0m.
[[0;32m OK [0m] Reached target [0;1;39mSystem Initialization[0m.
[[0;32m OK [0m] Started [0;1;39mDaily Cleanup of Temporary Directories[0m.
[[0;32m OK [0m] Reached target [0;1;39mSystem Time Set[0m.
[[0;32m OK [0m] Started [0;1;39mDaily rotation of log files[0m.
[[0;32m OK [0m] Reached target [0;1;39mTimer Units[0m.
[[0;32m OK [0m] Listening on [0;1;39mAvahi mDNS/DNS-SD Stack Activation Socket[0m.
[[0;32m OK [0m] Listening on [0;1;39mD-Bus System Message Bus Socket[0m.
Starting [0;1;39mDocker Socket for the API[0m...
[[0;32m OK [0m] Listening on [0;1;39mdropbear.socket[0m.
[[0;32m OK [0m] Listening on [0;1;39mPC/SC Smart Card Daemon Activation Socket[0m.
Starting [0;1;39mWeston socket[0m...
Starting [0;1;39mD-Bus System Message Bus[0m...
Starting [0;1;39mReboot and dump vmcore via kexec[0m...
[[0;32m OK [0m] Listening on [0;1;39mDocker Socket for the API[0m.
[[0;32m OK [0m] Listening on [0;1;39mWeston socket[0m.
[[0;32m OK [0m] Reached target [0;1;39mSocket Units[0m.
[ 11.280381] sii902x 1-003b: supply iovcc not found, using dummy regulator
[ 11.292396] omap-mailbox 29000000.mailbox: omap mailbox rev 0x66fc9100
[[0;32m OK [0m] Found device [0;1;39m/dev/ttyS2[0m.
[ 11.331211] at24 0-0051: supply vcc not found, using dummy regulator
[[0;32m OK [0m] Finished [0;1;39mReboot and dump vmcore via[ 11.338613] sii902x 1-003b: supply cvcc12 not found, using dummy regulator
kexec[0m.
[ 11.354875] at24 0-0051: 65536 byte 24c512 EEPROM, writable, 1 bytes/write
[[0;32m OK [0m] Started [0;1;39mD-Bus System Message Bus[0[ 11.397949] i2c i2c-1: Added multiplexed i2c bus 2
m.
[[0;32m OK [0m] Reached target [0;1;39mBasic System[0m.
[ 11.478293] [drm] Initialized tidss 1.0.0 20180215 for 30200000.dss on minor 0
[ 11.494143] tps6598x 0-003f: Unable to find the interrupt, switching to polling
[[0;32m OK [0m] Started [0;1;39mJob spooling tools[0m.
[[0;32m OK [0m] Started [0;1;39mPeriodic Command Scheduler[0m.
[ 11.562839] rtc-ti-k3 2b1f0000.rtc: Clock rate 32552 is not 32768! Could misbehave!
[ 11.595073] Console: switching to colour frame buffer device 256x72
[ 11.638455] tidss 30200000.dss: [drm] fb0: tidssdrmfb frame buffer device
Starting [0;1;39mPrint notice about GPLv3 packages[0m[ 11.646612] rtc-ti-k3 2b1f0000.rtc: registered as rtc0
...
[ 11.656858] rtc-ti-k3 2b1f0000.rtc: setting system clock to 1970-01-01T00:03:34 UTC (214)
[ 11.659136] systemd-journald[119]: Time jumped backwards, rotating.
[ 11.694430] systemd-journald[119]: Oldest entry in /run/log/journal/85e864222d184411b10fe655b5fb36fe/system.journal is older than the configured file retention duration (1month), suggesting rotation.
[ 11.715038] systemd-journald[119]: /run/log/journal/85e864222d184411b10fe655b5fb36fe/system.journal: Journal header limits reached or header out-of-date, rotating.
Starting [0;1;39mIPv6 Packet Filtering Framework[0m...
Starting [0;1;39mIPv4 Packet Filtering Framework[0m...
[[0;32m OK [0m] Started [0;1;39mirqbalance daemon[0m.
Starting [0;1;39mLighttpd Daemon[0m...
[[0;32m OK [0m] Started [0;1;39mstrongSwan IPsec IIKEv2 daemon using ipsec.conf[0m.
[ 11.860669] audit: type=1334 audit(1699807055.758:4): prog-id=7 op=LOAD
[ 11.870679] audit: type=1334 audit(1699807055.770:5): prog-id=8 op=LOAD
Starting [0;1;39mUser Login Management[0m...
[[0;32m OK [0m] Started [0;1;39mTEE Supplicant[0m.
Starting [0;1;39mTelnet Server[0m...
[[0;1;31mFAILED[0m] Failed to start [0;1;39mPrint notice about GPLv3 packages[0m.
See 'systemctl status gplv3-notice.service' for details.
[[0;32m OK [0m] Finished [0;1;39mIPv6 Packet Filtering Framework[0m.
[[0;32m OK [0m] Finished [0;1;39mIPv4 Packet Filtering Framework[0m.
[[0;32m OK [0m] Finished [0;1;39mTelnet Server[0m.
[[0;32m OK [0m] Reached target [0;1;39mPreparation for Network[0m.
Starting [0;1;39mNetwork Configuration[0m...
[[0;32m OK [0m] Started [0;1;39mLighttpd Daemon[0m.
[[0;32m OK [0m] Started [0;1;39mUser Login Management[0m.
[ 12.786022] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 12.922535] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[[0;32m OK [0m] Started [0;1;39mNetwork Configuration[0m.
Starting [0;1;39mNetwork Name Resolution[0m...
[[0;32m OK [0m] Started [0;1;39mNetwork Name Resolution[0m.
[[0;32m OK [0m] Reached target [0;1;39mNetwork[0m.
[[0;32m OK [0m] Reached target [0;1;39mHost and Network Name Lookups[0m.
Starting [0;1;39mAvahi mDNS/DNS-SD Stack[0m...
Starting [0;1;39mEnable and configure wl18xx bluetooth stack[0m...
Starting [0;1;39mcontainerd container runtime[0m...
[[0;32m OK [0m] Started [0;1;39mNetperf Benchmark Server[0m.
[[0;32m OK [0m] Started [0;1;39mNFS status monitor for NFSv2/3 locking.[0m.
Starting [0;1;39mPermit User Sessions[0m...
[[0;1;31mFAILED[0m] Failed to start [0;1;39mEnable andfigure wl18xx bluetooth stack[0m.
See 'systemctl status bt-enable.service' for details.
[[0;32m OK [0m] Finished [0;1;39mPermit User Sessions[0m.
[[0;32m OK [0m] Started [0;1;39mAvahi mDNS/DNS-SD Stack[0m.
[[0;32m OK [0m] Reached target [0;1;39mHardware activated USB gadget[0m.
[[0;32m OK [0m] Listening on [0;1;39mLoad/Save RF itch Status /dev/rfkill Watch[0m.
[[0;32m OK [0m] Started [0;1;39mGetty on tty1[0m.
[[0;32m OK [0m] Started [0;1;39mSerial Getty on ttyS2[0m.
[[0;32m OK [0m] Reached target [0;1;39mLogin Prompts[0m.
Starting [0;1;39mSynchronize System and HW clocks[0m...
Starting [0;1;39mWeston, a Waylandositor, as a system service[0m...
Starting [0;1;39mSave/Restore Sound Card State[0m...
[ 15.078316] audit: type=1334 audit(1699807058.974:6): prog-id=9 op=LOAD
[ 15.090484] audit: type=1334 audit(1699807058.986:7): prog-id=10 op=LOAD
Starting [0;1;39mUser Database Manager[0m...
[[0;32m OK [0m] Finished [0;1;39mSynchronize System and HW clocks[0m.
[[0;32m OK [0m] Finished [0;1;39mSave/Restore Sound Card State[0m.
[[0;32m OK [0m] Reached target [0;1;39mSound Card[0m.
[[0;32m OK [0m] Started [0;1;39mUser Database Manager[0m.
[[0;32m OK [0m] Created slice [0;1;39mUser Slice of UID 1000[0m.
Starting [0;1;39mUser Runtime Directory /run/user/1000[0m...
[[0;32m OK [0m] Finished [0;1;39mUser Runtime Directory /run/user/1000[0m.
Starting [0;1;39mUser Manager for UID 1000[0m...
[ 16.059435] audit: type=1006 audit(1699807059.958:8): pid=572 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=1 res=1
[ 16.076026] audit: type=1300 audit(1699807059.958:8): arch=c00000b7 syscall=64 success=yes exit=4 a0=8 a1=ffffe4e2bb38 a2=4 a3=ffff91c00020 items=0 ppid=1 pid=572 auid=1000 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=1 comm="(systemd)" exe="/lib/systemd/systemd" key=(null)
[ 16.104420] audit: type=1327 audit(1699807059.958:8): proctitle="(systemd)"
[[0;32m OK [0m] Created slice [0;1;39mSlice /system/systemd-fsck[0m.
[[0;32m OK [0m] Started [0;1;39mcontainerd container runtime[0m.
[[0;32m OK [0m] Found device [0;1;39mDataTraveler_2.0 1[0m.
Starting [0;1;39mFile System Check on /dev/sda1[0m...
[[0;32m OK [0m] Started [0;1;39mUser Manager for UID 1000[0m.
[[0;32m OK [0m] Finished [0;1;39mFile System Check on /dev/sda1[0m.
[[0;32m OK [0m] Started [0;1;39mSession c1 of User weston[0m.
Mounting [0;1;39m/run/media/sda1[0m...
[[0;32m OK [0m] Found device [0;1;39m/dev/mmcblk0p2[0m.
[[0;32m OK [0m] Found device [0;1;39m/dev/mmcblk1p3[0m.
[[0;32m OK [0m] Found device [0;1;39m/dev/mmcblk0p1[0m.
[[0;32m OK [0m] Found device [0;1;39m/dev/mmcblk1p1[0m.
[[0;32m OK [0m] Found device [0;1;39m/dev/mmcblk1p2[0m.
[[0;32m OK [0m] Mounted [0;1;39m/run/media/sda1[0m.
Starting [0;1;39mFile System Check on /dev/mmcblk0p1[0m...
Starting [0;1;39mFile System Check on /dev/mmcblk0p2[0m...
Starting [0;1;39mFile System Check on /dev/mmcblk1p1[0m...
Starting [0;1;39mFile System Check on /dev/mmcblk1p2[0m...
Starting [0;1;39mFile System Check on /dev/mmcblk1p3[0m...
[[0;32m OK [0m] Finished [0;1;39mFile System Check on /dev/mmcblk0p1[0m.
[[0;32m OK [0m] Finished [0;1;39mFile System Check on /dev/mmcblk0p2[0m.
[[0;32m OK [0m] Finished [0;1;39mFile System Check on /dev/mmcblk1p1[0m.
[[0;32m OK [0m] Finished [0;1;39mFile System Check on /dev/mmcblk1p2[0m.
[[0;32m OK [0m] Finished [0;1;39mFile System Check on /dev/mmcblk1p3[0m.
Mounting [0;1;39m/run/media/boot-mmcblk1p1[0m...
Mounting [0;1;39m/run/media/mmcblk0p1[0m...
[ 18.068801] FAT-fs (mmcblk1p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
Mounting [0;1;39m/run/media/mmcblk0p2[0m...
Mounting [0;1;39m/run/media/mmcblk1p3[0m...
Mounting [0;1;39m/run/media/root-mmcblk1p2[0m...
[ 18.166166] EXT4-fs (mmcblk1p3): mounting ext3 file system using the ext4 subsystem
[[0;32m OK [0m] Mounted [0;1;39m/run/media/boot-mmcblk1p1[0m.
[[0;32m OK [0m] Mounted [0;1;39m/run/media/mmcblk0p1[0m.
[[0;32m OK [0m] Mounted [0;1;39m/run/media/mmcblk0p2[0m.
[ 18.215650] EXT4-fs (mmcblk1p2): mounted filesystem 76fa7af0-54da-4e18-a5c6-a7fa4655a291 r/w with ordered data mode. Quota mode: none.
[ 18.227585] EXT4-fs (mmcblk1p3): mounted filesystem c1fbfc96-de37-4072-95be-08bc6d59e080 r/w with ordered data mode. Quota mode: none.
[[0;32m OK [0m] Mounted [0;1;39m/run/media/root-mmcblk1p2[0m.
[[0;32m OK [0m] Mounted [0;1;39m/run/media/mmcblk1p3[0m.
[ 18.293205] audit: type=1006 audit(1699807062.190:9): pid=525 uid=0 old-auid=4294967295 auid=1000 tty=tty7 old-ses=4294967295 ses=2 res=1
[ 18.305862] audit: type=1300 audit(1699807062.190:9): arch=c00000b7 syscall=64 success=yes exit=4 a0=8 a1=ffffe4e2bb38 a2=4 a3=ffff91c00020 items=0 ppid=1 pid=525 auid=1000 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=tty7 ses=2 comm="(weston)" exe="/lib/systemd/systemd" key=(null)
[ 18.332234] audit: type=1327 audit(1699807062.190:9): proctitle="(weston)"
[[0;32m OK [0m] Started [0;1;39mWeston, a Wayland mpositor, as a system service[0m.
Starting [0;1;39mMatrix GUI[0m...
[[0;1;31mFAILED[0m] Failed to start [0;1;39mMatrix GUI[0m.
See 'systemctl status matrix-gui-2.0.service' for details.
[[0;32m OK [0m] Reached target [0;1;39mMulti-User System[0m.
[[0;32m OK [0m] Reached target [0;1;39mGraphical Interface[0m.
Starting [0;1;39mRecord Runlevel Change in UTMP[0m...
[[0;32m OK [0m] Finished [0;1;39mRecord Runlevel Change in UTMP[0m.
_____ _____ _ _
| _ |___ ___ ___ ___ | _ |___ ___ |_|___ ___| |_
| | _| .'| . | . | | __| _| . | | | -_| _| _|
|__|__|_| |__,|_ |___| |__| |_| |___|_| |___|___|_|
|___| |___|
Arago Project am65xx-evm -
Arago 2023.04 am65xx-evm -
am65xx-evm login:
- 10:37:44 [INFO] Host: root
- 10:37:49 [INFO] Target:
root
[ 21.181030] audit: type=1006 audit(1699807065.078:10): pid=803 uid=0 old-auid=4294967295 auid=0 tty=(none) old-ses=4294967295 ses=3 res=1
[ 21.194569] audit: type=1300 audit(1699807065.078:10): arch=c00000b7 syscall=64 success=yes exit=1 a0=8 a1=ffffe4e2bb38 a2=1 a3=ffff91c00020 items=0 ppid=1 pid=803 auid=0 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=3 comm="(systemd)" exe="/lib/systemd/systemd" key=(null)
[ 21.221610] audit: type=1327 audit(1699807065.078:10): proctitle="(systemd)"
[ 21.382979] audit: type=1334 audit(1699807065.278:11): prog-id=11 op=LOAD
[ 21.390301] audit: type=1300 audit(1699807065.278:11): arch=c00000b7 syscall=280 success=yes exit=8 a0=5 a1=ffffd99003f0 a2=78 a3=0 items=0 ppid=1 pid=803 auid=0 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=3 comm="systemd" exe="/lib/systemd/systemd" key=(null)
[ 21.416386] audit: type=1327 audit(1699807065.278:11): proctitle="(systemd)"
[ 21.424578] audit: type=1334 audit(1699807065.282:12): prog-id=11 op=UNLOAD
[ 21.432333] audit: type=1300 audit(1699807065.282:12): arch=c00000b7 syscall=57 success=yes exit=0 a0=8 a1=ffff83a82020 a2=0 a3=ffff83a827e0 items=0 ppid=1 pid=803 auid=0 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=3 comm="systemd" exe="/lib/systemd/systemd" key=(null)
[ 21.459500] audit: type=1327 audit(1699807065.282:12): proctitle="(systemd)"
[ 21.467336] audit: type=1334 audit(1699807065.282:13): prog-id=12 op=LOAD
7[r[999;999H[6nroot@am65xx-evm:~#
- 10:37:49 [INFO] Sleeping 15 secs to allow systemd to finish starting processes...
- 10:38:04 [INFO] Disconnected serial from am62xx-sk
- 10:38:04 [INFO] Connected to am62xx-sk via serial
- 10:38:04 [INFO] Host: uname -a
- 10:38:04 [INFO] Target:
uname -a
Linux am65xx-evm 6.6.0-next-20231109 #1 SMP PREEMPT Thu Nov 9 06:55:16 UTC 2023 aarch64 aarch64 aarch64 GNU/Linux
root@am65xx-evm:~#
- 10:38:04 [INFO] Host: cat /proc/cmdline
- 10:38:05 [INFO] Target:
cat /proc/cmdline
Raw
beagleplay -emmc-only boot
U-Boot SPL 2024.01-rc2-00066-g7acaad9f055c (Nov 12 2023 - 10:29:13 -0600)
SYSFW ABI: 3.1 (firmware rev 0x0009 '9.1.5--v09.01.05 (Kool Koala)')
SPL initial stack usage: 13384 bytes
Trying to boot from MMC1
Starting ATF on ARM64 core...
NOTICE: BL31: v2.9.0 (debug):v2.9.0-1048-ge7781c84e9b3
NOTICE: BL31: Built : 10:29:10, Nov 12 2023
INFO: GICv3 without legacy support detected.
INFO: ARM GICv3 driver initialized in EL3
INFO: Maximum SPI INTID supported: 287
INFO: SYSFW ABI: 3.1 (firmware rev 0x0009 '9.1.5--v09.01.05 (Kool Koala)')
INFO: BL31: Initializing runtime services
INFO: BL31: cortex_a53: CPU workaround for erratum 855873 was applied
INFO: BL31: cortex_a53: CPU workaround for erratum 1530924 was applied
ERROR: Failed to get response (-19)
ERROR: Transfer send failed (-19)
ERROR: Unable to query firmware capabilities (-19)
INFO: BL31: Initializing BL32
I/TC:
I/TC: OP-TEE version: 4.0.0-51-gce0d3a4655bd (gcc version 11.3.1 20220712 (Arm GNU Toolchain 11.3.Rel1)) #1 Sun Nov 12 16:29:18 UTC 2023 aarch64
I/TC: WARNING: This OP-TEE configuration might be insecure!
I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html
I/TC: Primary CPU initializing
I/TC: SYSFW ABI: 3.1 (firmware rev 0x0009 '9.1.5--v09.01.05 (Kool Koala)')
I/TC: HUK Initialized
I/TC: Primary CPU switching to normal world boot
INFO: BL31: Preparing for EL3 exit to normal world
INFO: Entry point address = 0x80080000
INFO: SPSR = 0x3c9
U-Boot SPL 2024.01-rc2-00066-g7acaad9f055c (Nov 12 2023 - 10:29:49 -0600)
SYSFW ABI: 3.1 (firmware rev 0x0009 '9.1.5--v09.01.05 (Kool Koala)')
SPL initial stack usage: 1888 bytes
Trying to boot from MMC1
U-Boot 2024.01-rc2-00066-g7acaad9f055c (Nov 12 2023 - 10:29:49 -0600)
SoC: AM62X SR1.0 GP
Model: BeagleBoard.org BeaglePlay
DRAM: 2 GiB
Core: 98 devices, 27 uclasses, devicetree: separate
MMC: mmc@fa10000: 0, mmc@fa00000: 1, mmc@fa20000: 2
Loading Environment from nowhere... OK
In: serial@2800000
Out: serial@2800000
Err: serial@2800000
Net: No ethernet found.
Press SPACE to abort autoboot in 2 seconds
MMC: no card present
Scanning for bootflows in all bootdevs
Seq Method State Uclass Part Name Filename
--- ----------- ------ -------- ---- ------------------------ ----------------
Scanning bootdev 'mmc@fa00000.bootdev':
MMC: no card present
MMC: no card present
MMC: no card present
MMC: no card present
Scanning bootdev 'mmc@fa10000.bootdev':
0 extlinux ready mmc 1 mmc@fa10000.bootdev.part_ /extlinux/extlinux.conf
** Booting bootflow 'mmc@fa10000.bootdev.part_1' with extlinux
1: Linux eMMC
Retrieving file: /Image
Retrieving file: /initrd.img
append: root=/dev/mmcblk0p2 ro rootfstype=ext4 rootwait net.ifnames=0 quiet
Retrieving file: /dtbs/ti/k3-am625-beagleplay.dtb
Retrieving file: /overlays/k3-am625-beagleplay-release-mikrobus-set-native.dtbo
## Flattened Device Tree blob at 88000000
Booting using the fdt blob at 0x88000000
Working FDT set to 88000000
Loading Ramdisk to 8f0eb000, end 8fffff9c ... OK
Loading Device Tree to 000000008f0d6000, end 000000008f0eafff ... OK
Working FDT set to 8f0d6000
Starting kernel ...
I/TC: Secondary CPU 1 initializing
I/TC: Secondary CPU 1 switching to normal world boot
I/TC: Secondary CPU 2 initializing
I/TC: Secondary CPU 2 switching to normal world boot
I/TC: Secondary CPU 3 initializing
I/TC: Secondary CPU 3 switching to normal world boot
I/TC: Reserved shared memory is enabled
I/TC: Dynamic shared memory is enabled
I/TC: Normal World virtualization support is disabled
I/TC: Asynchronous notifications are disabled
[ 1.987226] am65-cpsw-nuss 8000000.ethernet: Use random MAC address
[ 2.007026] hub 2-0:1.0: config failed, hub doesn't have any ports! (err -19)
[ 2.122116] sdhci-am654 fa00000.mmc: parsing dt failed (-517)
[ 2.133703] bq32k 0-0068: hctosys: unable to read the hardware clock
[ 5.590360] tidss 30200000.dss: tidss_encoder_atomic_check: No bus_formats in connected display - force RGB888_1X24
[ 6.115294] debugfs: Directory 'pd:53' with parent 'pm_genpd' already present!
[ 6.123397] debugfs: Directory 'pd:52' with parent 'pm_genpd' already present!
[ 6.131246] debugfs: Directory 'pd:51' with parent 'pm_genpd' already present!
[ 6.139341] debugfs: Directory 'pd:182' with parent 'pm_genpd' already present!
rootfs: recovering journal
rootfs: clean, 132637/950272 files, 3307827/3794688 blocks
[ 11.573152] davinci-mcasp 2b10000.mcasp: IRQ common not found
[ 11.573185] k3-m4-rproc 5000000.m4fss: configured M4 for remoteproc mode
[ 11.625440] remoteproc remoteproc2: request_firmware failed: -2
[ 11.923441] platform 78000000.r5f: could not request atcm region for resource
[ 11.931124] platform 78000000.r5f: failed to get internal memories, ret = -16
[ 11.938609] k3_r5_rproc bus@f0000:bus@b00000:r5fss@78000000: k3_r5_core_of_init failed, ret = -16
[ 11.947837] k3_r5_rproc bus@f0000:bus@b00000:r5fss@78000000: k3_r5_cluster_of_init failed, ret = -16
Mounting Arbitrary Executable File Formats File System...
[ OK ] Finished Set console font and keymap.
[ OK ] Finished Tell Plymouth To Write Out Runtime Data.
[ OK ] Mounted Arbitrary Executable File Formats File System.
[ OK ] Listening on Load/Save RF itch Status /dev/rfkill Watch.
[ OK ] Finished Enable support fo nal executable binary formats.
[ OK ] Finished Create Volatile Files and Directories.
Starting Network Name Resolution...
Starting Network Time Synchronization...
Starting Update UTMP about System Boot/Shutdown...
[ OK ] Finished Update UTMP about System Boot/Shutdown.
[ OK ] Finished Load AppArmor profiles.
Starting Raise network interfaces...
KK[ OK ] Finished Raise network interfaces.
[ OK ] Started Network Time Synchronization.
[ OK ] Reached target System Initialization.
[ OK ] Started Daily Cleanup of Temporary Directories.
[ OK ] Reached target System Time Set.
[ OK ] Reached target System Time Synchronized.
[ OK ] Started Periodic ext4 Onli ata Check for All Filesystems.
[ OK ] Started Discard unused blocks once a week.
[ OK ] Started Daily rotation of log files.
[ OK ] Reached target Timers.
[ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket.
[ OK ] Listening on D-Bus System Message Bus Socket.
Starting Docker Socket for the API.
[ OK ] Listening on GPS (Global P ioning System) Daemon Sockets.
[ OK ] Listening on Docker Socket for the API.
[ OK ] Reached target Sockets.
[ OK ] Reached target Basic System.
Starting Avahi mDNS/DNS-SD Stack...
Starting BeagleBoard Generate Symlinks...
Starting BeagleBoard.org USB gadgets...
[ OK ] Started Regular background program processing daemon.
[ OK ] Started D-Bus System Message Bus.
Starting dphys-swapfile - unt, and delete a swap file...
Starting Remove Stale Onli t4 Metadata Check Snapshots...
Starting Initialize hardware monitoring sensors...
Starting System Logging Service...
Starting User Login Management...
Starting LSB: Start daemon at boot time...
Starting Disk Manager...
Starting WPA supplicant...
[ OK ] Started Network Name Resolution.
[ OK ] Finished BeagleBoard Generate Symlinks.
[ OK ] Reached target Host and Network Name Lookups.
[ OK ] Finished Initialize hardware monitoring sensors.
[ OK ] Started System Logging Service.
[ OK ] Finished Remove Stale Onli ext4 Metadata Check Snapshots.
Starting Save/Restore Sound Card State...
[ OK ] Found device /dev/ttyGS0.
[ OK ] Finished Save/Restore Sound Card State.
[ OK ] Reached target Sound Card.
[ OK ] Started LSB: Start daemon at boot time.
[ OK ] Finished dphys-swapfile - mount, and delete a swap file.
[ OK ] Started User Login Management.
[ OK ] Started Avahi mDNS/DNS-SD Stack.
[ OK ] Started WPA supplicant.
[ OK ] Reached target Network.
[ OK ] Reached target Network is Online.
Starting BeagleBoard.org Code Server...
Starting containerd container runtime...
Starting LSB: disk temperature monitoring daemon...
Starting Create 6lowpan (IEEE802.15.4) network device...
Starting A high performanc and a reverse proxy server...
Starting OpenBSD Secure Shell server...
Starting Permit User Sessions...
[ OK ] Finished Permit User Sessions.
Starting Light Display Manager...
Starting Hold until boot process finishes up...
[ OK ] Started LSB: disk temperature monitoring daemon.
Starting Authorization Manager...
[ OK ] Started BeagleBoard.org Code Server.
[ OK ] Started OpenBSD Secure Shell server.
[ OK ] Finished Hold until boot process finishes up.
Debian GNU/Linux 11 BeaglePlay ttyS2
BeagleBoard.org Debian Bullseye Xfce Image 2023-02-04
Support: https://bbb.io/debian
default username:password is [debian:temppwd]
BeaglePlay login: debian
Password:
The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.
Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
Last login: Wed Nov 1 19:45:33 UTC 2023 on ttyS2
debian@BeaglePlay:~$ uname -a
Linux BeaglePlay 5.10.168-ti-arm64-r111 #1bullseye SMP Tue Sep 26 14:22:20 UTC 2023 aarch64 GNU/Linux
Raw
beagleplay-emmc-sdfs-boot
U-Boot SPL 2024.01-rc2-00066-g7acaad9f055c (Nov 12 2023 - 10:29:13 -0600)
SYSFW ABI: 3.1 (firmware rev 0x0009 '9.1.5--v09.01.05 (Kool Koala)')
SPL initial stack usage: 13384 bytes
Trying to boot from MMC1
Starting ATF on ARM64 core...
NOTICE: BL31: v2.9.0 (debug):v2.9.0-1048-ge7781c84e9b3
NOTICE: BL31: Built : 10:29:10, Nov 12 2023
INFO: GICv3 without legacy support detected.
INFO: ARM GICv3 driver initialized in EL3
INFO: Maximum SPI INTID supported: 287
INFO: SYSFW ABI: 3.1 (firmware rev 0x0009 '9.1.5--v09.01.05 (Kool Koala)')
INFO: BL31: Initializing runtime services
INFO: BL31: cortex_a53: CPU workaround for erratum 855873 was applied
INFO: BL31: cortex_a53: CPU workaround for erratum 1530924 was applied
ERROR: Failed to get response (-19)
ERROR: Transfer send failed (-19)
ERROR: Unable to query firmware capabilities (-19)
INFO: BL31: Initializing BL32
I/TC:
I/TC: OP-TEE version: 4.0.0-51-gce0d3a4655bd (gcc version 11.3.1 20220712 (Arm GNU Toolchain 11.3.Rel1)) #1 Sun Nov 12 16:29:18 UTC 2023 aarch64
I/TC: WARNING: This OP-TEE configuration might be insecure!
I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html
I/TC: Primary CPU initializing
I/TC: SYSFW ABI: 3.1 (firmware rev 0x0009 '9.1.5--v09.01.05 (Kool Koala)')
I/TC: HUK Initialized
I/TC: Primary CPU switching to normal world boot
INFO: BL31: Preparing for EL3 exit to normal world
INFO: Entry point address = 0x80080000
INFO: SPSR = 0x3c9
U-Boot SPL 2024.01-rc2-00066-g7acaad9f055c (Nov 12 2023 - 10:29:49 -0600)
SYSFW ABI: 3.1 (firmware rev 0x0009 '9.1.5--v09.01.05 (Kool Koala)')
SPL initial stack usage: 1888 bytes
Trying to boot from MMC1
U-Boot 2024.01-rc2-00066-g7acaad9f055c (Nov 12 2023 - 10:29:49 -0600)
SoC: AM62X SR1.0 GP
Model: BeagleBoard.org BeaglePlay
DRAM: 2 GiB
Core: 98 devices, 27 uclasses, devicetree: separate
MMC: mmc@fa10000: 0, mmc@fa00000: 1, mmc@fa20000: 2
Loading Environment from nowhere... OK
In: serial@2800000
Out: serial@2800000
Err: serial@2800000
Net: No ethernet found.
Press SPACE to abort autoboot in 2 seconds
switch to partitions #0, OK
mmc1 is current device
SD/MMC found on device 1
Failed to load 'uEnv.txt'
Scanning for bootflows in all bootdevs
Seq Method State Uclass Part Name Filename
--- ----------- ------ -------- ---- ------------------------ ----------------
Scanning bootdev 'mmc@fa00000.bootdev':
0 extlinux ready mmc 1 mmc@fa00000.bootdev.part_ /extlinux/extlinux.conf
** Booting bootflow 'mmc@fa00000.bootdev.part_1' with extlinux
BeaglePlay microSD (extlinux.conf) (swap enabled)
1: BeaglePlay microSD Recovery
2: BeaglePlay microSD disable BCFSERIAL
3: BeaglePlay copy microSD to eMMC
4: BeaglePlay microSD (default)
Enter choice: 4: BeaglePlay microSD (default)
Retrieving file: /Image
Retrieving file: /initrd.img
append: root=/dev/mmcblk1p3 ro rootfstype=ext4 resume=/dev/mmcblk1p2 rootwait net.ifnames=0 quiet
Retrieving file: /ti/k3-am625-beagleplay.dtb
## Flattened Device Tree blob at 88000000
Booting using the fdt blob at 0x88000000
Working FDT set to 88000000
Loading Ramdisk to 8ead9000, end 8ffff74d ... OK
Loading Device Tree to 000000008eacc000, end 000000008ead8ee5 ... OK
Working FDT set to 8eacc000
Starting kernel ...
I/TC: Secondary CPU 1 initializing
I/TC: Secondary CPU 1 switching to normal world boot
I/TC: Secondary CPU 2 initializing
I/TC: Secondary CPU 2 switching to normal world boot
I/TC: Secondary CPU 3 initializing
I/TC: Secondary CPU 3 switching to normal world boot
I/TC: Reserved shared memory is enabled
I/TC: Dynamic shared memory is enabled
I/TC: Normal World virtualization support is disabled
I/TC: Asynchronous notifications are disabled
[ 3.986915] am65-cpsw-nuss 8000000.ethernet: Use random MAC address
1;-1frootfs: clean, 131529/827392 files, 2082896/3299451 blocks
trap: EXIT: bad trap
Mounting proc-sys-fs-binfm utable File Formats File System...
[ OK ] Mounted proc-sys-fs-binfmt ecutable File Formats File System.
[ OK ] Finished systemd-tmpfiles- te Volatile Files and Directories.
Starting systemd-timesyncd - Network Time Synchronization...
Starting systemd-update-ut rd System Boot/Shutdown in UTMP...
[ OK ] Finished systemd-binfmt.se Set Up Additional Binary Formats.
[ OK ] Finished systemd-update-ut cord System Boot/Shutdown in UTMP.
[ OK ] Finished apparmor.service - Load AppArmor profiles.
Starting networking.service - Raise network interfaces...
[ 11.332651] omap-mailbox 29000000.mailbox: no available mbox devices found
[ OK ] Started systemd-timesyncd. 0m - Network Time Synchronization.
[ OK ] Reached target sysinit.target - System Initialization.
[ OK ] Started systemd-tmpfiles-c Cleanup of Temporary Directories.
[ OK ] Reached target time-set.target - System Time Set.
[ OK ] Started dpkg-db-backup.tim Daily dpkg database backup timer.
[ OK ] Started e2scrub_all.timer etadata Check for All Filesystems.
[ OK ] Started fstrim.timer - Discard unused blocks once a week.
[ OK ] Started logrotate.timer - Daily rotation of log files.
[ OK ] Reached target timers.target - Timer Units.
[ OK ] Listening on avahi-daemon. NS/DNS-SD Stack Activation Socket.
[ OK ] Listening on dbus.socket - D-Bus System Message Bus Socket.
Starting docker.socket - Docker Socket for the API...
[ OK ] Listening on gpsd.socket ositioning System) Daemon Sockets.
[ OK ] Listening on docker.socket - Docker Socket for the API.
[ OK ] Reached target sockets.target - Socket Units.
[ OK ] Reached target basic.target - Basic System.
Starting avahi-daemon.serv e - Avahi mDNS/DNS-SD Stack...
Starting bb-symlinks.servi - BeagleBoard Generate Symlinks...
Starting bb-usb-gadgets.se m - BeagleBoard.org USB gadgets...
[ OK ] Started cron.service - kground program processing daemon.
Starting dbus.service - D-Bus System Message Bus...
Starting dphys-swapfile.se unmount, and delete a swap file...
Starting e2scrub_reap.serv e ext4 Metadata Check Snapshots...
Starting iwd.service - Wireless service...
[ OK ] Started mender-client.serv e - Mender OTA update service.
Starting systemd-logind.se ice - User Login Management...
Starting udisks2.service - Disk Manager...
[ OK ] Reached target usb-gadget. m - Hardware activated USB gadget.
[ OK ] Finished networking.service - Raise network interfaces.
[ OK ] Listening on systemd-rfkil l Switch Status /dev/rfkill Watch.
[ OK ] Finished bb-symlinks.servi m - BeagleBoard Generate Symlinks.
[ OK ] Found device dev-ttyGS0.device - /dev/ttyGS0.
[ OK ] Finished dphys-swapfile.se t/unmount, and delete a swap file.
[ OK ] Started dbus.service - D-Bus System Message Bus.
Starting wpa_supplicant.service - WPA supplicant...
[ OK ] Finished e2scrub_reap.serv ine ext4 Metadata Check Snapshots.
[ OK ] Started systemd-logind.service - User Login Management.
[ OK ] Started iwd.service - Wireless service.
[ OK ] Started avahi-daemon.service - Avahi mDNS/DNS-SD Stack.
[ OK ] Started wpa_supplicant.service - WPA supplicant.
[ OK ] Reached target network.target - Network.
[ OK ] Reached target network-online.target - Network is Online.
Starting bb-code-server.se m - BeagleBoard.org Code Server...
Starting containerd.servic - containerd container runtime...
Starting nginx.service rver and a reverse proxy server...
Starting ssh.service - OpenBSD Secure Shell server...
Starting systemd-user-sess vice - Permit User Sessions...
Starting polkit.service - Authorization Manager...
[ OK ] Finished systemd-user-sess ervice - Permit User Sessions.
Starting lightdm.service - Light Display Manager...
Starting plymouth-quit-wai until boot process finishes up...
[ OK ] Started polkit.service - Authorization Manager.
[ OK ] Started bb-code-server.ser [0m - BeagleBoard.org Code Server.
[ OK ] Started nginx.service server and a reverse proxy server.
[ OK ] Finished plymouth-quit-wai ld until boot process finishes up.
Debian GNU/Linux 12 BeaglePlay ttyS2
BeagleBoard.org Debian Bookworm Xfce Image 2023-11-01
Support: https://bbb.io/debian
default username:password is [debian:temppwd]
BeaglePlay login: debian
temPassword:
The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.
Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
Last login: Sun Nov 12 16:34:50 UTC 2023 on ttyS2
debian@BeaglePlay:~$ sudo poweruname -a
Linux BeaglePlay 6.6.0-arm64-k3-r10 #1 SMP Wed Nov 1 23:01:44 UTC 2023 aarch64 GNU/Linux
Raw
beagleplay-sd-onlyboot
U-Boot SPL 2024.01-rc2-00066-g7acaad9f055c (Nov 12 2023 - 10:29:13 -0600)
SYSFW ABI: 3.1 (firmware rev 0x0009 '9.1.5--v09.01.05 (Kool Koala)')
SPL initial stack usage: 13384 bytes
Trying to boot from MMC2
Starting ATF on ARM64 core...
NOTICE: BL31: v2.9.0 (debug):v2.9.0-1048-ge7781c84e9b3
NOTICE: BL31: Built : 10:29:10, Nov 12 2023
INFO: GICv3 without legacy support detected.
INFO: ARM GICv3 driver initialized in EL3
INFO: Maximum SPI INTID supported: 287
INFO: SYSFW ABI: 3.1 (firmware rev 0x0009 '9.1.5--v09.01.05 (Kool Koala)')
INFO: BL31: Initializing runtime services
INFO: BL31: cortex_a53: CPU workaround for erratum 855873 was applied
INFO: BL31: cortex_a53: CPU workaround for erratum 1530924 was applied
ERROR: Failed to get response (-19)
ERROR: Transfer send failed (-19)
ERROR: Unable to query firmware capabilities (-19)
INFO: BL31: Initializing BL32
I/TC:
I/TC: OP-TEE version: 4.0.0-51-gce0d3a4655bd (gcc version 11.3.1 20220712 (Arm GNU Toolchain 11.3.Rel1)) #1 Sun Nov 12 16:29:18 UTC 2023 aarch64
I/TC: WARNING: This OP-TEE configuration might be insecure!
I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html
I/TC: Primary CPU initializing
I/TC: SYSFW ABI: 3.1 (firmware rev 0x0009 '9.1.5--v09.01.05 (Kool Koala)')
I/TC: HUK Initialized
I/TC: Primary CPU switching to normal world boot
INFO: BL31: Preparing for EL3 exit to normal world
INFO: Entry point address = 0x80080000
INFO: SPSR = 0x3c9
U-Boot SPL 2024.01-rc2-00066-g7acaad9f055c (Nov 12 2023 - 10:29:49 -0600)
SYSFW ABI: 3.1 (firmware rev 0x0009 '9.1.5--v09.01.05 (Kool Koala)')
SPL initial stack usage: 1888 bytes
Trying to boot from MMC2
U-Boot 2024.01-rc2-00066-g7acaad9f055c (Nov 12 2023 - 10:29:49 -0600)
SoC: AM62X SR1.0 GP
Model: BeagleBoard.org BeaglePlay
DRAM: 2 GiB
Core: 98 devices, 27 uclasses, devicetree: separate
MMC: mmc@fa10000: 0, mmc@fa00000: 1, mmc@fa20000: 2
Loading Environment from nowhere... OK
In: serial@2800000
Out: serial@2800000
Err: serial@2800000
Net: No ethernet found.
Press SPACE to abort autoboot in 2 seconds
switch to partitions #0, OK
mmc1 is current device
SD/MMC found on device 1
Failed to load 'uEnv.txt'
Scanning for bootflows in all bootdevs
Seq Method State Uclass Part Name Filename
--- ----------- ------ -------- ---- ------------------------ ----------------
Scanning bootdev 'mmc@fa00000.bootdev':
0 extlinux ready mmc 1 mmc@fa00000.bootdev.part_ /extlinux/extlinux.conf
** Booting bootflow 'mmc@fa00000.bootdev.part_1' with extlinux
BeaglePlay microSD (extlinux.conf) (swap enabled)
1: BeaglePlay microSD Recovery
2: BeaglePlay microSD disable BCFSERIAL
3: BeaglePlay copy microSD to eMMC
4: BeaglePlay microSD (default)
Enter choice: 4: BeaglePlay microSD (default)
Retrieving file: /Image
Retrieving file: /initrd.img
append: root=/dev/mmcblk1p3 ro rootfstype=ext4 resume=/dev/mmcblk1p2 rootwait net.ifnames=0 quiet
Retrieving file: /ti/k3-am625-beagleplay.dtb
## Flattened Device Tree blob at 88000000
Booting using the fdt blob at 0x88000000
Working FDT set to 88000000
Loading Ramdisk to 8ead9000, end 8ffff74d ... OK
Loading Device Tree to 000000008eacc000, end 000000008ead8ee5 ... OK
Working FDT set to 8eacc000
Starting kernel ...
I/TC: Secondary CPU 1 initializing
I/TC: Secondary CPU 1 switching to normal world boot
I/TC: Secondary CPU 2 initializing
I/TC: Secondary CPU 2 switching to normal world boot
I/TC: Secondary CPU 3 initializing
I/TC: Secondary CPU 3 switching to normal world boot
I/TC: Reserved shared memory is enabled
I/TC: Dynamic shared memory is enabled
I/TC: Normal World virtualization support is disabled
I/TC: Asynchronous notifications are disabled
[ 3.993957] am65-cpsw-nuss 8000000.ethernet: Use random MAC address
1;-1frootfs: clean, 131526/827392 files, 2078913/3299451 blocks
trap: EXIT: bad trap
[ OK ] Reached target swap.target - Swaps.
Mounting proc-sys-fs-binfm utable File Formats File System...
[ OK ] Mounted proc-sys-fs-binfmt ecutable File Formats File System.
[ OK ] Finished systemd-binfmt.se Set Up Additional Binary Formats.
[ OK ] Finished systemd-tmpfiles- te Volatile Files and Directories.
Starting systemd-timesyncd - Network Time Synchronization...
Starting systemd-update-ut rd System Boot/Shutdown in UTMP...
[ OK ] Finished apparmor.service - Load AppArmor profiles.
Starting networking.service - Raise network interfaces...
[ OK ] Finished systemd-update-ut cord System Boot/Shutdown in UTMP.
[ OK ] Started systemd-timesyncd. 0m - Network Time Synchronization.
[ OK ] Reached target sysinit.target - System Initialization.
[ OK ] Started systemd-tmpfiles-c Cleanup of Temporary Directories.
[ OK ] Reached target time-set.target - System Time Set.
[ OK ] Started dpkg-db-backup.tim Daily dpkg database backup timer.
[ OK ] Started e2scrub_all.timer etadata Check for All Filesystems.
[ OK ] Started fstrim.timer - Discard unused blocks once a week.
[ OK ] Started logrotate.timer - Daily rotation of log files.
[ OK ] Reached target timers.target - Timer Units.
[ OK ] Listening on avahi-daemon. NS/DNS-SD Stack Activation Socket.
[ OK ] Listening on dbus.socket - D-Bus System Message Bus Socket.
Starting docker.socket - Docker Socket for the API...
[ OK ] Listening on gpsd.socket ositioning System) Daemon Sockets.
[ OK ] Listening on docker.socket - Docker Socket for the API.
[ OK ] Reached target sockets.target - Socket Units.
[ OK ] Reached target basic.target - Basic System.
Starting avahi-daemon.serv e - Avahi mDNS/DNS-SD Stack...
Starting bb-symlinks.servi - BeagleBoard Generate Symlinks...
[ 10.961362] omap-mailbox 29000000.mailbox: no available mbox devices found
Starting bb-usb-gadgets.se m - BeagleBoard.org USB gadgets...
[ OK ] Started cron.service - kground program processing daemon.
Starting dbus.service - D-Bus System Message Bus...
Starting dphys-swapfile.se unmount, and delete a swap file...
Starting e2scrub_reap.serv e ext4 Metadata Check Snapshots...
Starting iwd.service - Wireless service...
[ OK ] Started mender-client.serv e - Mender OTA update service.
Starting systemd-logind.se ice - User Login Management...
Starting udisks2.service - Disk Manager...
[ OK ] Reached target usb-gadget. m - Hardware activated USB gadget.
[ OK ] Listening on systemd-rfkil l Switch Status /dev/rfkill Watch.
[ OK ] Finished networking.service - Raise network interfaces.
[ OK ] Finished bb-symlinks.servi m - BeagleBoard Generate Symlinks.
[ OK ] Found device dev-ttyGS0.device - /dev/ttyGS0.
[ OK ] Finished dphys-swapfile.se t/unmount, and delete a swap file.
[ OK ] Started dbus.service - D-Bus System Message Bus.
[ OK ] Finished e2scrub_reap.serv ine ext4 Metadata Check Snapshots.
Starting wpa_supplicant.service - WPA supplicant...
[ OK ] Started iwd.service - Wireless service.
[ OK ] Started systemd-logind.service - User Login Management.
[ OK ] Started avahi-daemon.service - Avahi mDNS/DNS-SD Stack.
[ OK ] Started wpa_supplicant.service - WPA supplicant.
[ OK ] Reached target network.target - Network.
[ OK ] Reached target network-online.target - Network is Online.
Starting bb-code-server.se m - BeagleBoard.org Code Server...
Starting containerd.servic - containerd container runtime...
Starting nginx.service rver and a reverse proxy server...
Starting ssh.service - OpenBSD Secure Shell server...
Starting systemd-user-sess vice - Permit User Sessions...
Starting polkit.service - Authorization Manager...
[ OK ] Finished systemd-user-sess ervice - Permit User Sessions.
Starting lightdm.service - Light Display Manager...
Starting plymouth-quit-wai until boot process finishes up...
[ OK ] Started bb-code-server.ser [0m - BeagleBoard.org Code Server.
[ OK ] Started polkit.service - Authorization Manager.
Debian GNU/Linux 12 BeaglePlay ttyS2
BeagleBoard.org Debian Bookworm Xfce Image 2023-11-01
Support: https://bbb.io/debian
default username:password is [debian:temppwd]
BeaglePlay login: debian
Password:
The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.
Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
Last login: Sun Nov 12 16:20:55 UTC 2023 on ttyS2
debian@BeaglePlay:~$ uname -a
Linux BeaglePlay 6.6.0-arm64-k3-r10 #1 SMP Wed Nov 1 23:01:44 UTC 2023 aarch64 GNU/Linux
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment