Skip to content

Instantly share code, notes, and snippets.

@nmenon

nmenon/j721e-idk-gw Secret

Created November 3, 2023 00:21
Show Gist options
  • Save nmenon/e79bed6807da05c723e71687fb3c0b90 to your computer and use it in GitHub Desktop.
Save nmenon/e79bed6807da05c723e71687fb3c0b90 to your computer and use it in GitHub Desktop.
Download ZIP
Raw
j721e-idk-gw
U-Boot SPL 2024.01-rc1-00171-g902c58fce1d8 (Nov 02 2023 - 18:09:16 -0500)
SYSFW ABI: 3.1 (firmware rev 0x0009 '9.1.2--v09.01.02 (Kool Koala)')
Trying to boot from UART
C
- 18:15:41 [INFO] Disconnected serial from j721e-idk-gw
- 18:15:41 [INFO] Receiving primary bootloader image ...
- 18:17:18 [INFO] Connected to j721e-idk-gw via serial
- 18:17:18 [INFO] Target:
Loaded 1022431 bytes
Loading Environment from nowhere... OK
init_env from device 7 not supported!
Starting ATF on ARM64 core...
NOTICE: BL31: v2.9.0(debug):v2.9.0-975-ge15b7128d2df
NOTICE: BL31: Built : 18:09:11, Nov 2 2023
INFO: GICv3 without legacy support detected.
INFO: ARM GICv3 driver initialized in EL3
INFO: Maximum SPI INTID supported: 991
INFO: SYSFW ABI: 3.1 (firmware rev 0x0009 '9.1.2--v09.01.02 (Kool Koala)')
INFO: BL31: Initializing runtime services
INFO: BL31: cortex_a72: CPU workaround for erratum 1319367 was applied
INFO: BL31: cortex_a72: CPU workaround for CVE 2018_3639 was applied
INFO: BL31: cortex_a72: CPU workaround for CVE 2022_23960 was applied
ERROR: Failed to get response (-19)
ERROR: Transfer send failed (-19)
ERROR: Unable to query firmware capabilities (-19)
INFO: BL31: Initializing BL32
I/TC:
I/TC: OP-TEE version: 4.0.0-26-g37f820d63d76 (gcc version 11.3.1 20220712 (Arm GNU Toolchain 11.3.Rel1)) #1 Thu Nov 2 23:09:52 UTC 2023 aarch64
I/TC: WARNING: This OP-TEE configuration might be insecure!
I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html
I/TC: Primary CPU initializing
I/TC: SYSFW ABI: 3.1 (firmware rev 0x0009 '9.1.2--v09.01.02 (Kool Koala)')
I/TC: HUK Initialized
I/TC: Activated SA2UL device
I/TC: Fixing SA2UL firewall owner for GP device
I/TC: Enabled firewalls for SA2UL TRNG device
I/TC: SA2UL TRNG initialized
I/TC: SA2UL Drivers initialized
I/TC: Primary CPU switching to normal world boot
INFO: BL31: Preparing for EL3 exit to normal world
INFO: Entry point address = 0x80080000
INFO: SPSR = 0x3c9
U-Boot SPL 2024.01-rc1-00171-g902c58fce1d8 (Nov 02 2023 - 18:10:52 -0500)
SYSFW ABI: 3.1 (firmware rev 0x0009 '9.1.2--v09.01.02 (Kool Koala)')
Detected: J7X-BASE-CPB rev E3
Detected: J7X-GESI-EXP rev E3
Detected: J7X-VSC8514-ETH rev E2
Trying to boot from UART
C
- 18:17:18 [INFO] Disconnected serial from j721e-idk-gw
- 18:17:18 [INFO] Receiving secondary bootloader image ...
- 18:19:34 [INFO] Connected to j721e-idk-gw via serial
- 18:19:34 [INFO] Host:
- 18:19:36 [INFO] Target:
Loaded 1344871 bytes
U-Boot 2024.01-rc1-00171-g902c58fce1d8 (Nov 02 2023 - 18:10:52 -0500)
SoC: J721E SR1.0 GP
Model: Texas Instruments J721e EVM
Board: J721EX-PM2-SOM rev E7
DRAM: 4 GiB
Core: 134 devices, 33 uclasses, devicetree: separate
Flash: 0 Bytes
MMC: mmc@4f80000: 0, mmc@4fb0000: 1
Loading Environment from nowhere... OK
In: serial@2800000
Out: serial@2800000
Err: serial@2800000
am65_cpsw_nuss ethernet@46000000: K3 CPSW: nuss_ver: 0x6BA00101 cpsw_ver: 0x6BA80100 ale_ver: 0x00293904 Ports:1 mdio_freq:1000000
Detected: J7X-BASE-CPB rev E3
Detected: J7X-GESI-EXP rev E3
Detected: J7X-VSC8514-ETH rev E2
Sierra init failed:-19
Net: eth0: ethernet@46000000port@1
Hit any key to stop autoboot: 2 0
=>
=>
=>
=>
- 18:19:36 [INFO] Disconnected serial from j721e-idk-gw
- 18:19:36 [INFO] Connected to j721e-idk-gw via serial
- 18:19:36 [INFO] Host:
- 18:19:37 [INFO] Target:
=>
- 18:19:37 [INFO] Host: version
- 18:19:37 [INFO] Target:
version
U-Boot 2024.01-rc1-00171-g902c58fce1d8 (Nov 02 2023 - 18:10:52 -0500)
aarch64-none-linux-gnu-gcc (Arm GNU Toolchain 11.3.Rel1) 11.3.1 20220712
GNU ld (Arm GNU Toolchain 11.3.Rel1) 2.38.20220708
=>
- 18:19:37 [INFO] Host: setenv bootargs 'console=ttyS2,115200n8 earlyprintk=serial,ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000 rootwait fsck.mode=skip sysrq_always_enabled '
- 18:19:37 [INFO] Target:
setenv bootargs 'console=ttyS2,115200n8 earlyprintk=serial,ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000 rootwait fsck.mode=skip sysrq_always_enabled '
=>
- 18:19:37 [INFO] Host: setenv bootcmd ''
- 18:19:37 [INFO] Target:
setenv bootcmd ''
=>
- 18:19:37 [INFO] Host: setenv autoload 'no'
- 18:19:37 [INFO] Target:
setenv autoload 'no'
=>
- 18:19:37 [INFO] Host: setenv serverip '192.168.0.1'
- 18:19:38 [INFO] Target:
setenv serverip '192.168.0.1'
=>
- 18:19:38 [INFO] Host: setenv _initramfs -
- 18:19:38 [INFO] Target:
setenv _initramfs -
=>
- 18:19:38 [INFO] Host: printenv
- 18:19:39 [INFO] Target:
printenv
_initramfs=-
addr_fit=0x90000000
arch=arm
args_all=setenv optargs earlycon=ns16550a,mmio32,0x02800000 ${mtdparts}
args_mmc=run finduuid;setenv bootargs console=${console} ${optargs} root=PARTUUID=${uuid} rw rootfstype=${mmcrootfstype}
args_ufs=setenv devtype scsi;setenv bootpart 1:1; run ufs_finduuid; setenv bootargs console = ${console} ${optargs} root=PARTUUID=${uuid} rw rootfstype=${scsirootfstype}; setenv devtype scsi; setenv bootpart 1:1
autoload=no
baudrate=115200
board=j721e
board_name=j721e
board_rev=E7
board_serial=0330
board_software_revision=01
boot=mmc
boot_fdt=try
boot_fit=0
boot_rprocs=if test ${dorprocboot} -eq 1 && test ${boot} = mmc; then rproc init; run boot_rprocs_mmc; fi;
boot_rprocs_mmc=env set rproc_id; env set rproc_fw; for i in ${rproc_fw_binaries} ; do if test -z "${rproc_id}" ; then env set rproc_id $i; else env set rproc_fw $i; run rproc_load_and_boot_one; env set rproc_id; env set rproc_fw; fi; done
boot_targets=mmc1 mmc0 usb pxe dhcp
bootargs=console=ttyS2,115200n8 earlyprintk=serial,ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000 rootwait fsck.mode=skip sysrq_always_enabled
bootcmd=
bootcmd_ti_mmc=run findfdt; run init_${boot}; run main_cpsw0_qsgmii_phyinit; run boot_rprocs; if test ${boot_fit} -eq 1; then run get_fit_${boot}; run get_fit_overlaystring; run run_fit; else; run get_kern_${boot}; run get_fdt_${boot}; run get_overlay_${boot}; run run_kern; fi;
bootdelay=2
bootdir=/boot
bootenvfile=uEnv.txt
bootm_size=0x10000000
bootpart=1:2
bootscript=echo Running bootscript from mmc${mmcdev} ...; source ${loadaddr}
console=ttyS2,115200n8
cpu=armv8
default_device_tree=ti/k3-j721e-common-proc-board.dtb
dfu_alt_info_emmc=rawemmc raw 0 0x800000 mmcpart 1; rootfs part 0 1 mmcpart 0; tiboot3.bin.raw raw 0x0 0x400 mmcpart 1; tispl.bin.raw raw 0x400 0x1000 mmcpart 1; u-boot.img.raw raw 0x1400 0x2000 mmcpart 1; u-env.raw raw 0x3400 0x100 mmcpart 1; sysfw.itb.raw raw 0x3600 0x800 mmcpart 1
dfu_alt_info_mmc=boot part 1 1; rootfs part 1 2; tiboot3.bin fat 1 1; tispl.bin fat 1 1; u-boot.img fat 1 1; uEnv.txt fat 1 1; sysfw.itb fat 1 1
dfu_alt_info_ospi=tiboot3.bin raw 0x0 0x080000; tispl.bin raw 0x080000 0x200000; u-boot.img raw 0x280000 0x400000; u-boot-env raw 0x680000 0x020000; sysfw.itb raw 0x6c0000 0x100000; rootfs raw 0x800000 0x3800000
dfu_alt_info_ram=tispl.bin ram 0x80080000 0x200000; u-boot.img ram 0x81000000 0x400000
dorprocboot=0
dtboaddr=0x89000000
envboot=if mmc dev ${mmcdev}; then if mmc rescan; then echo SD/MMC found on device ${mmcdev}; if test -n "${loadbootscript}" && run loadbootscript; then run bootscript; else if run loadbootenv; then echo Loaded env from ${bootenvfile}; run importbootenv; fi; if test -n $uenvcmd; then echo Running uenvcmd ...; run uenvcmd; fi; fi; fi; fi;
eth1addr=70:ff:76:1d:8a:ec
eth2addr=70:ff:76:1d:8a:ed
eth3addr=70:ff:76:1d:8a:ee
eth4addr=70:ff:76:1d:8a:ef
eth5addr=70:ff:76:1d:93:f7
eth6addr=70:ff:76:1d:93:f8
eth7addr=70:ff:76:1d:93:f9
eth8addr=70:ff:76:1d:93:fa
eth9addr=70:ff:76:1d:93:fb
ethaddr=78:db:2f:e0:81:ed
fdt_addr_r=0x88000000
fdtaddr=0x88000000
fdtcontroladdr=fde84020
fdtoverlay_addr_r=0x89000000
findfdt=setenv name_fdt ${default_device_tree}; if test $board_name = j721e; then setenv name_fdt ti/k3-j721e-common-proc-board.dtb; fi; if test $board_name = j7200; then setenv name_fdt ti/k3-j7200-common-proc-board.dtb; fi; if test $board_name = j721e-eaik || test $board_name = j721e-sk; then setenv name_fdt ti/k3-j721e-sk.dtb; fi; setenv fdtfile ${name_fdt}
finduuid=part uuid ${boot} ${bootpart} uuid
get_fdt_mmc=load mmc ${bootpart} ${fdtaddr} ${bootdir}/dtb/${name_fdt}
get_fdt_ufs=load ${devtype} ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}
get_fit_config=setexpr name_fit_config gsub / _ conf-${fdtfile}
get_fit_mmc=load mmc ${bootpart} ${addr_fit} ${bootdir}/${name_fit}
get_fit_overlaystring=for overlay in $name_overlays; do; setexpr name_fit_overlay gsub / _ conf-${overlay}; setenv overlaystring ${overlaystring}'#'${name_fit_overlay}; done;
get_kern_mmc=load mmc ${bootpart} ${loadaddr} ${bootdir}/${name_kern}
get_kern_ufs=load ${devtype} ${bootpart} ${loadaddr} ${bootdir}/${name_kern}
get_overlay_mmc=fdt address ${fdtaddr}; fdt resize 0x100000; for overlay in $name_overlays; do; load mmc ${bootpart} ${dtboaddr} ${bootdir}/dtb/${overlay} && fdt apply ${dtboaddr}; done;
get_overlay_ufs=fdt address ${fdtaddr}; fdt resize 0x100000; for overlay in $name_overlays; do; load scsi ${bootpart} ${dtboaddr} ${bootdir}/${overlay} && fdt apply ${dtboaddr}; done;
importbootenv=echo Importing environment from mmc${mmcdev} ...; env import -t ${loadaddr} ${filesize}
init_main_cpsw0_qsgmii_phy=gpio set gpio@22_17; gpio clear gpio@22_16
init_mmc=run args_all args_mmc
init_ufs=ufs init; scsi scan; run args_ufs
kernel_addr_r=0x82000000
loadaddr=0x82000000
loadbootenv=fatload mmc ${mmcdev} ${loadaddr} ${bootenvfile}
loadfdt=load ${devtype} ${bootpart} ${fdtaddr} ${bootdir}/dtb/${fdtfile}
loadimage=load ${devtype} ${bootpart} ${loadaddr} ${bootdir}/${bootfile}
main_cpsw0_qsgmii_phyinit=if test $board_name = J721EX-PM1-SOM || test $board_name = J721EX-PM2-SOM || test $board_name = j721e; then do_main_cpsw0_qsgmii_phyinit=1; else do_main_cpsw0_qsgmii_phyinit=0; fi; if test ${do_main_cpsw0_qsgmii_phyinit} -eq 1 && test ${dorprocboot} -eq 1 && test ${boot} = mmc; then run init_main_cpsw0_qsgmii_phy; fi;
mmcboot=if mmc dev ${mmcdev}; then devnum=${mmcdev}; devtype=mmc; if mmc rescan; then echo SD/MMC found on device ${mmcdev}; if run loadimage; then run args_mmc; if test ${boot_fit} -eq 1; then run run_fit; else run mmcloados; fi; fi; fi; fi;
mmcdev=1
mmcloados=if test ${boot_fdt} = yes || test ${boot_fdt} = try; then if run get_fdt_mmc; then bootz ${loadaddr} - ${fdtaddr}; else if test ${boot_fdt} = try; then bootz; else echo WARN: Cannot load the DT; fi; fi; else bootz; fi;
mmcrootfstype=ext4 rootwait
mtdids=nor0=47040000.spi.0,nor0=47034000.hyperbus
mtdparts=mtdparts=47040000.spi.0:512k(ospi.tiboot3),2m(ospi.tispl),4m(ospi.u-boot),256k(ospi.env),1m(ospi.sysfw),256k(ospi.env.backup),57344k@8m(ospi.rootfs),256k(ospi.phypattern);47034000.hyperbus:512k(hbmc.tiboot3),2m(hbmc.tispl),4m(hbmc.u-boot),256k(hbmc.env),1m(hbmc.sysfw),-@8m(hbmc.rootfs)
name_fit=fitImage
name_kern=Image
partitions=name=rootfs,start=0,size=-,uuid=${uuid_gpt_rootfs}
pxefile_addr_r=0x80100000
ramdisk_addr_r=0x88080000
rd_spec=-
rdaddr=0x88080000
rproc_fw_binaries=2 /lib/firmware/j7-main-r5f0_0-fw 3 /lib/firmware/j7-main-r5f0_1-fw 4 /lib/firmware/j7-main-r5f1_0-fw 5 /lib/firmware/j7-main-r5f1_1-fw 6 /lib/firmware/j7-c66_0-fw 7 /lib/firmware/j7-c66_1-fw 8 /lib/firmware/j7-c71_0-fw
rproc_load_and_boot_one=if load mmc ${bootpart} $loadaddr ${rproc_fw}; then if rproc load ${rproc_id} ${loadaddr} ${filesize}; then rproc start ${rproc_id}; fi; fi
run_fit=run get_fit_config; bootm ${addr_fit}#${name_fit_config}${overlaystring}
run_kern=booti ${loadaddr} ${rd_spec} ${fdtaddr}
scriptaddr=0x80000000
scsirootfstype=ext4 rootwait
serial#=0000000000000330
serverip=192.168.0.1
soc=k3
stderr=serial@2800000
stdin=serial@2800000
stdout=serial@2800000
ufs_finduuid=part uuid scsi ${bootpart} uuid
update_to_fit=setenv loadaddr ${addr_fit}; setenv bootfile ${name_fit}
vendor=ti
Environment size: 7204/131067 bytes
=>
- 18:19:39 [INFO] Host: printenv bootargs
- 18:19:39 [INFO] Target:
printenv bootargs
bootargs=console=ttyS2,115200n8 earlyprintk=serial,ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000 rootwait fsck.mode=skip sysrq_always_enabled
=>
- 18:19:39 [INFO] Host: setenv bootargs ''${bootargs}' ip=:::::eth0:dhcp '
- 18:19:39 [INFO] Target:
setenv bootargs ''${bootargs}' ip=:::::eth0:dhcp '
=>
- 18:19:39 [INFO] Host: setenv serverip '192.168.0.1'
- 18:19:39 [INFO] Target:
setenv serverip '192.168.0.1'
=>
- 18:19:39 [INFO] Host: setenv autoload 'no'
- 18:19:39 [INFO] Target:
setenv autoload 'no'
=>
- 18:19:39 [INFO] Host: dhcp
- 18:19:40 [INFO] Target:
dhcp
k3-navss-ringacc ringacc@2b800000: Ring Accelerator probed rings:286, gp-rings[96,20] sci-dev-id:235
k3-navss-ringacc ringacc@2b800000: dma-ring-reset-quirk: disabled
am65_cpsw_nuss_port ethernet@46000000port@1: K3 CPSW: rflow_id_base: 2
link up on port 1, speed 1000, full duplex
BOOTP broadcast 1
DHCP client bound to address 192.168.0.30 (2 ms)
=>
- 18:19:40 [INFO] Host: setenv dorprocboot '1'
- 18:19:40 [INFO] Target:
setenv dorprocboot '1'
=>
- 18:19:40 [INFO] Host: run boot_rprocs
- 18:19:41 [INFO] Target:
run boot_rprocs
k3_r5f_rproc r5f@41000000: Core 1 is already in use. No rproc commands work
k3_r5f_rproc r5f@41400000: Core 2 is already in use. No rproc commands work
79356 bytes read in 40 ms (1.9 MiB/s)
Load Remote Processor 2 with data@addr=0x82000000 79356 bytes: Success!
79356 bytes read in 40 ms (1.9 MiB/s)
k3_r5f_rproc r5f@5d00000: Invalid op: Trying to start secondary core 7 in lockstep mode
Load Remote Processor 3 with data@addr=0x82000000 79356 bytes: Failed!
79356 bytes read in 40 ms (1.9 MiB/s)
Load Remote Processor 4 with data@addr=0x82000000 79356 bytes: Success!
79356 bytes read in 40 ms (1.9 MiB/s)
k3_r5f_rproc r5f@5f00000: Invalid op: Trying to start secondary core 9 in lockstep mode
Load Remote Processor 5 with data@addr=0x82000000 79356 bytes: Failed!
145604 bytes read in 41 ms (3.4 MiB/s)
Load Remote Processor 6 with data@addr=0x82000000 145604 bytes: Success!
145604 bytes read in 42 ms (3.3 MiB/s)
Load Remote Processor 7 with data@addr=0x82000000 145604 bytes: Success!
10489000 bytes read in 50 ms (200.1 MiB/s)
Load Remote Processor 8 with data@addr=0x82000000 10489000 bytes: Success!
=>
- 18:19:41 [INFO] Host: printenv
- 18:19:41 [INFO] Target:
printenv
_initramfs=-
addr_fit=0x90000000
arch=arm
args_all=setenv optargs earlycon=ns16550a,mmio32,0x02800000 ${mtdparts}
args_mmc=run finduuid;setenv bootargs console=${console} ${optargs} root=PARTUUID=${uuid} rw rootfstype=${mmcrootfstype}
args_ufs=setenv devtype scsi;setenv bootpart 1:1; run ufs_finduuid; setenv bootargs console = ${console} ${optargs} root=PARTUUID=${uuid} rw rootfstype=${scsirootfstype}; setenv devtype scsi; setenv bootpart 1:1
autoload=no
baudrate=115200
board=j721e
board_name=j721e
board_rev=E7
board_serial=0330
board_software_revision=01
boot=mmc
boot_fdt=try
boot_fit=0
boot_rprocs=if test ${dorprocboot} -eq 1 && test ${boot} = mmc; then rproc init; run boot_rprocs_mmc; fi;
boot_rprocs_mmc=env set rproc_id; env set rproc_fw; for i in ${rproc_fw_binaries} ; do if test -z "${rproc_id}" ; then env set rproc_id $i; else env set rproc_fw $i; run rproc_load_and_boot_one; env set rproc_id; env set rproc_fw; fi; done
boot_targets=mmc1 mmc0 usb pxe dhcp
bootargs=console=ttyS2,115200n8 earlyprintk=serial,ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000 rootwait fsck.mode=skip sysrq_always_enabled ip=:::::eth0:dhcp
bootcmd=
bootcmd_ti_mmc=run findfdt; run init_${boot}; run main_cpsw0_qsgmii_phyinit; run boot_rprocs; if test ${boot_fit} -eq 1; then run get_fit_${boot}; run get_fit_overlaystring; run run_fit; else; run get_kern_${boot}; run get_fdt_${boot}; run get_overlay_${boot}; run run_kern; fi;
bootdelay=2
bootdir=/boot
bootenvfile=uEnv.txt
bootm_size=0x10000000
bootpart=1:2
bootscript=echo Running bootscript from mmc${mmcdev} ...; source ${loadaddr}
console=ttyS2,115200n8
cpu=armv8
default_device_tree=ti/k3-j721e-common-proc-board.dtb
dfu_alt_info_emmc=rawemmc raw 0 0x800000 mmcpart 1; rootfs part 0 1 mmcpart 0; tiboot3.bin.raw raw 0x0 0x400 mmcpart 1; tispl.bin.raw raw 0x400 0x1000 mmcpart 1; u-boot.img.raw raw 0x1400 0x2000 mmcpart 1; u-env.raw raw 0x3400 0x100 mmcpart 1; sysfw.itb.raw raw 0x3600 0x800 mmcpart 1
dfu_alt_info_mmc=boot part 1 1; rootfs part 1 2; tiboot3.bin fat 1 1; tispl.bin fat 1 1; u-boot.img fat 1 1; uEnv.txt fat 1 1; sysfw.itb fat 1 1
dfu_alt_info_ospi=tiboot3.bin raw 0x0 0x080000; tispl.bin raw 0x080000 0x200000; u-boot.img raw 0x280000 0x400000; u-boot-env raw 0x680000 0x020000; sysfw.itb raw 0x6c0000 0x100000; rootfs raw 0x800000 0x3800000
dfu_alt_info_ram=tispl.bin ram 0x80080000 0x200000; u-boot.img ram 0x81000000 0x400000
dnsip=192.0.2.2
dorprocboot=1
dtboaddr=0x89000000
envboot=if mmc dev ${mmcdev}; then if mmc rescan; then echo SD/MMC found on device ${mmcdev}; if test -n "${loadbootscript}" && run loadbootscript; then run bootscript; else if run loadbootenv; then echo Loaded env from ${bootenvfile}; run importbootenv; fi; if test -n $uenvcmd; then echo Running uenvcmd ...; run uenvcmd; fi; fi; fi; fi;
eth1addr=70:ff:76:1d:8a:ec
eth2addr=70:ff:76:1d:8a:ed
eth3addr=70:ff:76:1d:8a:ee
eth4addr=70:ff:76:1d:8a:ef
eth5addr=70:ff:76:1d:93:f7
eth6addr=70:ff:76:1d:93:f8
eth7addr=70:ff:76:1d:93:f9
eth8addr=70:ff:76:1d:93:fa
eth9addr=70:ff:76:1d:93:fb
ethact=ethernet@46000000port@1
ethaddr=78:db:2f:e0:81:ed
fdt_addr_r=0x88000000
fdtaddr=0x88000000
fdtcontroladdr=fde84020
fdtoverlay_addr_r=0x89000000
fileaddr=82000000
filesize=a00ca8
findfdt=setenv name_fdt ${default_device_tree}; if test $board_name = j721e; then setenv name_fdt ti/k3-j721e-common-proc-board.dtb; fi; if test $board_name = j7200; then setenv name_fdt ti/k3-j7200-common-proc-board.dtb; fi; if test $board_name = j721e-eaik || test $board_name = j721e-sk; then setenv name_fdt ti/k3-j721e-sk.dtb; fi; setenv fdtfile ${name_fdt}
finduuid=part uuid ${boot} ${bootpart} uuid
gatewayip=192.168.0.1
get_fdt_mmc=load mmc ${bootpart} ${fdtaddr} ${bootdir}/dtb/${name_fdt}
get_fdt_ufs=load ${devtype} ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}
get_fit_config=setexpr name_fit_config gsub / _ conf-${fdtfile}
get_fit_mmc=load mmc ${bootpart} ${addr_fit} ${bootdir}/${name_fit}
get_fit_overlaystring=for overlay in $name_overlays; do; setexpr name_fit_overlay gsub / _ conf-${overlay}; setenv overlaystring ${overlaystring}'#'${name_fit_overlay}; done;
get_kern_mmc=load mmc ${bootpart} ${loadaddr} ${bootdir}/${name_kern}
get_kern_ufs=load ${devtype} ${bootpart} ${loadaddr} ${bootdir}/${name_kern}
get_overlay_mmc=fdt address ${fdtaddr}; fdt resize 0x100000; for overlay in $name_overlays; do; load mmc ${bootpart} ${dtboaddr} ${bootdir}/dtb/${overlay} && fdt apply ${dtboaddr}; done;
get_overlay_ufs=fdt address ${fdtaddr}; fdt resize 0x100000; for overlay in $name_overlays; do; load scsi ${bootpart} ${dtboaddr} ${bootdir}/${overlay} && fdt apply ${dtboaddr}; done;
hostname=j721e-idk-gw
importbootenv=echo Importing environment from mmc${mmcdev} ...; env import -t ${loadaddr} ${filesize}
init_main_cpsw0_qsgmii_phy=gpio set gpio@22_17; gpio clear gpio@22_16
init_mmc=run args_all args_mmc
init_ufs=ufs init; scsi scan; run args_ufs
ipaddr=192.168.0.30
kernel_addr_r=0x82000000
loadaddr=0x82000000
loadbootenv=fatload mmc ${mmcdev} ${loadaddr} ${bootenvfile}
loadfdt=load ${devtype} ${bootpart} ${fdtaddr} ${bootdir}/dtb/${fdtfile}
loadimage=load ${devtype} ${bootpart} ${loadaddr} ${bootdir}/${bootfile}
main_cpsw0_qsgmii_phyinit=if test $board_name = J721EX-PM1-SOM || test $board_name = J721EX-PM2-SOM || test $board_name = j721e; then do_main_cpsw0_qsgmii_phyinit=1; else do_main_cpsw0_qsgmii_phyinit=0; fi; if test ${do_main_cpsw0_qsgmii_phyinit} -eq 1 && test ${dorprocboot} -eq 1 && test ${boot} = mmc; then run init_main_cpsw0_qsgmii_phy; fi;
mmcboot=if mmc dev ${mmcdev}; then devnum=${mmcdev}; devtype=mmc; if mmc rescan; then echo SD/MMC found on device ${mmcdev}; if run loadimage; then run args_mmc; if test ${boot_fit} -eq 1; then run run_fit; else run mmcloados; fi; fi; fi; fi;
mmcdev=1
mmcloados=if test ${boot_fdt} = yes || test ${boot_fdt} = try; then if run get_fdt_mmc; then bootz ${loadaddr} - ${fdtaddr}; else if test ${boot_fdt} = try; then bootz; else echo WARN: Cannot load the DT; fi; fi; else bootz; fi;
mmcrootfstype=ext4 rootwait
mtdids=nor0=47040000.spi.0,nor0=47034000.hyperbus
mtdparts=mtdparts=47040000.spi.0:512k(ospi.tiboot3),2m(ospi.tispl),4m(ospi.u-boot),256k(ospi.env),1m(ospi.sysfw),256k(ospi.env.backup),57344k@8m(ospi.rootfs),256k(ospi.phypattern);47034000.hyperbus:512k(hbmc.tiboot3),2m(hbmc.tispl),4m(hbmc.u-boot),256k(hbmc.env),1m(hbmc.sysfw),-@8m(hbmc.rootfs)
name_fit=fitImage
name_kern=Image
netmask=255.255.255.0
partitions=name=rootfs,start=0,size=-,uuid=${uuid_gpt_rootfs}
pxefile_addr_r=0x80100000
ramdisk_addr_r=0x88080000
rd_spec=-
rdaddr=0x88080000
rproc_fw_binaries=2 /lib/firmware/j7-main-r5f0_0-fw 3 /lib/firmware/j7-main-r5f0_1-fw 4 /lib/firmware/j7-main-r5f1_0-fw 5 /lib/firmware/j7-main-r5f1_1-fw 6 /lib/firmware/j7-c66_0-fw 7 /lib/firmware/j7-c66_1-fw 8 /lib/firmware/j7-c71_0-fw
rproc_load_and_boot_one=if load mmc ${bootpart} $loadaddr ${rproc_fw}; then if rproc load ${rproc_id} ${loadaddr} ${filesize}; then rproc start ${rproc_id}; fi; fi
run_fit=run get_fit_config; bootm ${addr_fit}#${name_fit_config}${overlaystring}
run_kern=booti ${loadaddr} ${rd_spec} ${fdtaddr}
scriptaddr=0x80000000
scsirootfstype=ext4 rootwait
serial#=0000000000000330
serverip=192.168.0.1
soc=k3
stderr=serial@2800000
stdin=serial@2800000
stdout=serial@2800000
ufs_finduuid=part uuid scsi ${bootpart} uuid
update_to_fit=setenv loadaddr ${addr_fit}; setenv bootfile ${name_fit}
vendor=ti
Environment size: 7390/131067 bytes
=>
- 18:19:41 [INFO] Host: tftp ${loadaddr} 192.168.0.1:vatf_j721e-idk-gw/32bc38b821870af13aaa028424c53d4e
- 18:19:45 [INFO] Target:
tftp ${loadaddr} 192.168.0.1:vatf_j721e-idk-gw/32bc38b821870af13aaa028424c53d4e
am65_cpsw_nuss_port ethernet@46000000port@1: K3 CPSW: rflow_id_base: 2
link up on port 1, speed 1000, full duplex
Using ethernet@46000000port@1 device
TFTP from server 192.168.0.1; our IP address is 192.168.0.30
Filename 'vatf_j721e-idk-gw/32bc38b821870af13aaa028424c53d4e'.
Load address: 0x82000000
Loading: *################################################## 40.4 MiB
12.5 MiB/s
done
Bytes transferred = 42394112 (286e200 hex)
=>
- 18:19:45 [INFO] Host: tftp ${fdt_addr_r} 192.168.0.1:vatf_j721e-idk-gw/62e4f53e122c339aa65cb5639de455a9
- 18:19:45 [INFO] Target:
tftp ${fdt_addr_r} 192.168.0.1:vatf_j721e-idk-gw/62e4f53e122c339aa65cb5639de455a9
am65_cpsw_nuss_port ethernet@46000000port@1: K3 CPSW: rflow_id_base: 2
link up on port 1, speed 1000, full duplex
Using ethernet@46000000port@1 device
TFTP from server 192.168.0.1; our IP address is 192.168.0.30
Filename 'vatf_j721e-idk-gw/62e4f53e122c339aa65cb5639de455a9'.
Load address: 0x88000000
Loading: *################################################## 111.9 KiB
9.9 MiB/s
done
Bytes transferred = 114565 (1bf85 hex)
=>
- 18:19:45 [INFO] Host: fdt address ${fdt_addr_r}
- 18:19:45 [INFO] Target:
fdt address ${fdt_addr_r}
Working FDT set to 88000000
=>
- 18:19:45 [INFO] Host: printenv bootargs
- 18:19:46 [INFO] Target:
printenv bootargs
bootargs=console=ttyS2,115200n8 earlyprintk=serial,ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000 rootwait fsck.mode=skip sysrq_always_enabled ip=:::::eth0:dhcp
=>
- 18:19:46 [INFO] Host: setenv bootargs ''${bootargs}' root=/dev/nfs rw nfsroot=192.168.0.1:/opt/NFS_exports/linux/j721e-idk-gw/autofs/5b50ed8fc16d4492c177b239bf042601,nolock,v3,tcp,rsize=4096,wsize=4096 '
- 18:19:46 [INFO] Target:
setenv bootargs ''${bootargs}' root=/dev/nfs rw nfsroot=192.168.0.1:/opt/NFS_exports/linux/j721e-idk-gw/autofs/5b50ed8fc16d4492c177b239bf042601,nolock,v3,tcp,rsize=4096,wsize=4096 '
=>
- 18:19:46 [INFO] Host: printenv bootcmd
- 18:19:46 [INFO] Target:
printenv bootcmd
bootcmd=
=>
- 18:19:46 [INFO] Host: setenv bootcmd ''${bootcmd}' if iminfo ${loadaddr}; then bootm ${loadaddr} ${_initramfs} ${fdt_addr_r}; else booti ${loadaddr} ${_initramfs} ${fdt_addr_r}; fi'
- 18:19:46 [INFO] Target:
setenv bootcmd ''${bootcmd}' if iminfo ${loadaddr}; then bootm ${loadaddr} ${_initramfs} ${fdt_addr_r}; else booti ${loadaddr} ${_initramfs} ${fdt_addr_r}; fi'
=>
- 18:19:46 [INFO] Host: version
- 18:19:46 [INFO] Target:
version
U-Boot 2024.01-rc1-00171-g902c58fce1d8 (Nov 02 2023 - 18:10:52 -0500)
aarch64-none-linux-gnu-gcc (Arm GNU Toolchain 11.3.Rel1) 11.3.1 20220712
GNU ld (Arm GNU Toolchain 11.3.Rel1) 2.38.20220708
=>
- 18:19:46 [INFO] Host: bdinfo
- 18:19:47 [INFO] Target:
bdinfo
boot_params = 0x0000000000000000
DRAM bank = 0x0000000000000000
-> start = 0x0000000080000000
-> size = 0x0000000080000000
DRAM bank = 0x0000000000000001
-> start = 0x0000000880000000
-> size = 0x0000000080000000
flashstart = 0x0000000000000000
flashsize = 0x0000000000000000
flashoffset = 0x0000000000000000
baudrate = 115200 bps
relocaddr = 0x00000000ffec4000
reloc off = 0x000000007f6c4000
Build = 64-bit
current eth = ethernet@46000000port@1
ethaddr = 78:db:2f:e0:81:ed
IP addr = 192.168.0.30
fdt_blob = 0x00000000fde84020
new_fdt = 0x00000000fde84020
fdt_size = 0x000000000001fd80
multi_dtb_fit= 0x0000000000000000
lmb_dump_all:
memory.cnt = 0x2 / max = 0x10
memory[0] [0x80000000-0xffffffff], 0x80000000 bytes flags: 0
memory[1] [0x880000000-0x8ffffffff], 0x80000000 bytes flags: 0
reserved.cnt = 0x4 / max = 0x10
reserved[0] [0x9e800000-0xa8ffffff], 0x0a800000 bytes flags: 4
reserved[1] [0xaa000000-0xabbfffff], 0x01c00000 bytes flags: 4
reserved[2] [0xfce75000-0xffffffff], 0x0318b000 bytes flags: 0
reserved[3] [0x880000000-0x8ffffffff], 0x80000000 bytes flags: 0
devicetree = separate
serial addr = 0x0000000002800000
width = 0x0000000000000000
shift = 0x0000000000000002
offset = 0x0000000000000000
clock = 0x0000000002dc6c00
arch_number = 0x0000000000000000
TLB addr = 0x00000000fffe0000
irq_sp = 0x00000000fde84010
sp start = 0x00000000fde84010
Early malloc usage: 2fc8 / 8000
=>
- 18:19:47 [INFO] Host:
- 18:19:47 [INFO] Target:
boot_params = 0x0000000000000000
DRAM bank = 0x0000000000000000
-> start = 0x0000000080000000
-> size = 0x0000000080000000
DRAM bank = 0x0000000000000001
-> start = 0x0000000880000000
-> size = 0x0000000080000000
flashstart = 0x0000000000000000
flashsize = 0x0000000000000000
flashoffset = 0x0000000000000000
baudrate = 115200 bps
relocaddr = 0x00000000ffec4000
reloc off = 0x000000007f6c4000
Build = 64-bit
current eth = ethernet@46000000port@1
ethaddr = 78:db:2f:e0:81:ed
IP addr = 192.168.0.30
fdt_blob = 0x00000000fde84020
new_fdt = 0x00000000fde84020
fdt_size = 0x000000000001fd80
multi_dtb_fit= 0x0000000000000000
lmb_dump_all:
memory.cnt = 0x2 / max = 0x10
memory[0] [0x80000000-0xffffffff], 0x80000000 bytes flags: 0
memory[1] [0x880000000-0x8ffffffff], 0x80000000 bytes flags: 0
reserved.cnt = 0x4 / max = 0x10
reserved[0] [0x9e800000-0xa8ffffff], 0x0a800000 bytes flags: 4
reserved[1] [0xaa000000-0xabbfffff], 0x01c00000 bytes flags: 4
reserved[2] [0xfce75000-0xffffffff], 0x0318b000 bytes flags: 0
reserved[3] [0x880000000-0x8ffffffff], 0x80000000 bytes flags: 0
devicetree = separate
serial addr = 0x0000000002800000
width = 0x0000000000000000
shift = 0x0000000000000002
offset = 0x0000000000000000
clock = 0x0000000002dc6c00
arch_number = 0x0000000000000000
TLB addr = 0x00000000fffe0000
irq_sp = 0x00000000fde84010
sp start = 0x00000000fde84010
Early malloc usage: 2fc8 / 8000
=>
- 18:19:47 [INFO] Host: ls mmc 0:1
- 18:19:47 [INFO] Target:
ls mmc 0:1
974120 tispl.bin
1272860 u-boot.img
293216 tiboot3.bin
268998 sysfw.itb
33 secondary_bootloader.md5
4 ws-calibrate.rules
6 file(s), 0 dir(s)
=>
- 18:19:47 [INFO] Host: ls mmc 1:1
- 18:19:47 [INFO] Target:
ls mmc 1:1
EFI/
21582336 Image
268978 sysfw.itb
268978 sysfw-j721e-gp-evm.itb
278254 sysfw-j721e_sr1_1-hs-evm.itb
269718 sysfw-j721e_sr2-hs-fs-evm.itb
294385 tiboot3.bin
294385 tiboot3-j721e-gp-evm.bin
295160 tiboot3-j721e_sr1_1-hs-evm.bin
295160 tiboot3-j721e_sr2-hs-fs-evm.bin
987183 tispl.bin
1319011 u-boot.img
574 uEnv.txt
4 ws-calibrate.rules
13 file(s), 1 dir(s)
=>
- 18:19:47 [INFO] Host: ext4ls mmc 0:2 /lib/firmware
- 18:19:48 [INFO] Target:
ext4ls mmc 0:2 /lib/firmware
<DIR> 4096 .
<DIR> 4096 ..
2040 LICENCE.ibt_firmware
2046 LICENCE.iwlwifi_firmware
<DIR> 4096 cadence
<DIR> 4096 ethfw
<DIR> 4096 intel
918268 iwlwifi-3160-17.ucode
2120860 iwlwifi-8000C-22.ucode
2227284 iwlwifi-8000C-27.ucode
2310116 iwlwifi-8000C-31.ucode
2448976 iwlwifi-8000C-34.ucode
2428004 iwlwifi-8000C-36.ucode
1811984 iwlwifi-8265-22.ucode
2234528 iwlwifi-8265-27.ucode
2307104 iwlwifi-8265-31.ucode
2440780 iwlwifi-8265-34.ucode
2436632 iwlwifi-8265-36.ucode
2637216 iwlwifi-9260-th-b0-jf-b0-33.ucode
2678092 iwlwifi-9260-th-b0-jf-b0-34.ucode
2521412 iwlwifi-9260-th-b0-jf-b0-38.ucode
2620656 iwlwifi-9260-th-b0-jf-b0-41.ucode
2558176 iwlwifi-9260-th-b0-jf-b0-43.ucode
1489668 iwlwifi-9260-th-b0-jf-b0-46.ucode
<DIR> 4096 sdcard-firmware
<SYM> 49 j7-pru0_0-fw
<SYM> 49 j7-pru0_1-fw
<SYM> 49 j7-pru1_0-fw
<SYM> 49 j7-pru1_1-fw
<SYM> 49 j7-rtu0_0-fw
<SYM> 49 j7-rtu0_1-fw
<SYM> 49 j7-rtu1_0-fw
<SYM> 49 j7-rtu1_1-fw
<SYM> 35 j7-txpru0_0-fw
<SYM> 35 j7-txpru0_1-fw
<SYM> 35 j7-txpru1_0-fw
<SYM> 35 j7-txpru1_1-fw
<DIR> 4096 pdk-ipc
<DIR> 4096 pru
247469 pvdec_full_bin.fw
4592 regulatory.db
1182 regulatory.db.p7s
122880 rgx.fw.22.104.208.318
122880 rgx.fw.22.104.208.318.64k
344760 rgx.sh.22.104.208.318
<DIR> 4096 ti-connectivity
=>
- 18:19:48 [INFO] Host: ext4ls mmc 1:2 /lib/firmware
- 18:19:48 [INFO] Target:
ext4ls mmc 1:2 /lib/firmware
<DIR> 4096 .
<DIR> 4096 ..
2040 LICENCE.ibt_firmware
2046 LICENCE.iwlwifi_firmware
432248 bl32.bin
4105600 bl32.elf
<DIR> 4096 cadence
<DIR> 4096 intel
918268 iwlwifi-3160-17.ucode
2448976 iwlwifi-8000C-34.ucode
2428004 iwlwifi-8000C-36.ucode
2440780 iwlwifi-8265-34.ucode
2436632 iwlwifi-8265-36.ucode
2678092 iwlwifi-9260-th-b0-jf-b0-34.ucode
2521412 iwlwifi-9260-th-b0-jf-b0-38.ucode
1489652 iwlwifi-9260-th-b0-jf-b0-46.ucode
<SYM> 69 j7-c66_0-fw
<SYM> 76 j7-c66_0-fw-sec
<SYM> 69 j7-c66_1-fw
<SYM> 76 j7-c66_1-fw-sec
<SYM> 65 j7-c71_0-fw
<SYM> 72 j7-c71_0-fw-sec
<SYM> 67 j7-main-r5f0_0-fw
<SYM> 74 j7-main-r5f0_0-fw-sec
<SYM> 67 j7-main-r5f0_1-fw
<SYM> 74 j7-main-r5f0_1-fw-sec
<SYM> 67 j7-main-r5f1_0-fw
<SYM> 74 j7-main-r5f1_0-fw-sec
<SYM> 67 j7-main-r5f1_1-fw
<SYM> 74 j7-main-r5f1_1-fw-sec
<SYM> 67 j7-mcu-r5f0_1-fw
<SYM> 74 j7-mcu-r5f0_1-fw-sec
<SYM> 49 j7-pru0_0-fw
<SYM> 49 j7-pru0_1-fw
<SYM> 49 j7-pru1_0-fw
<SYM> 49 j7-pru1_1-fw
<SYM> 49 j7-rtu0_0-fw
<SYM> 49 j7-rtu0_1-fw
<SYM> 49 j7-rtu1_0-fw
<SYM> 49 j7-rtu1_1-fw
<SYM> 35 j7-txpru0_0-fw
<SYM> 35 j7-txpru0_1-fw
<SYM> 35 j7-txpru1_0-fw
<SYM> 35 j7-txpru1_1-fw
<DIR> 4096 pru
247469 pvdec_full_bin.fw
4728 regulatory.db
1182 regulatory.db.p7s
122880 rgx.fw.22.104.208.318
118784 rgx.fw.22.104.208.318.64k
382744 rgx.sh.22.104.208.318
28 tee-header_v2.bin
0 tee-pageable_v2.bin
432248 tee-pager_v2.bin
432276 tee.bin
4105600 tee.elf
<DIR> 4096 ti-connectivity
<DIR> 4096 ti-eth
<DIR> 4096 ti-ipc
=>
- 18:19:48 [INFO] Host: mmc rescan; echo $?
- 18:19:48 [INFO] Target:
mmc rescan; echo $?
0
=>
- 18:19:48 [INFO] Host: fatwrite mmc ${mmcdev}:1 ${loadaddr} ws-calibrate.rules 4
- 18:19:49 [INFO] Target:
fatwrite mmc ${mmcdev}:1 ${loadaddr} ws-calibrate.rules 4
4 bytes written in 5 ms (0 Bytes/s)
=>
- 18:19:49 [INFO] Host: boot
- 18:20:09 [INFO] Target:
boot
## Checking Image at 82000000 ...
Unknown image format!
## Flattened Device Tree blob at 88000000
Booting using the fdt blob at 0x88000000
Working FDT set to 88000000
Loading Device Tree to 000000008ffe1000, end 000000008fffff84 ... OK
Working FDT set to 8ffe1000
Starting kernel ...
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x411fd080]
[ 0.000000] Linux version 6.6.0-next-20231101 (KernelCI@build-j2363-arm64-gcc-10-defconfig-67qlg) (aarch64-linux-gnu-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP PREEMPT Wed Nov 1 06:13:46 UTC 2023
[ 0.000000] KASLR disabled due to lack of seed
[ 0.000000] Machine model: Texas Instruments J721e EVM
[ 0.000000] earlycon: ns16550a0 at MMIO32 0x0000000002800000 (options '')
[ 0.000000] printk: legacy bootconsole [ns16550a0] enabled
[ 0.000000] efi: UEFI not found.
[ 0.000000] OF: reserved mem: 0x000000009e800000..0x000000009fffffff (24576 KiB) nomap non-reusable optee@9e800000
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a0000000, size 1 MiB
[ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@a0000000, compatible id shared-dma-pool
[ 0.000000] OF: reserved mem: 0x00000000a0000000..0x00000000a00fffff (1024 KiB) nomap non-reusable r5f-dma-memory@a0000000
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a0100000, size 15 MiB
[ 0.000000] OF: reserved mem: initialized node r5f-memory@a0100000, compatible id shared-dma-pool
[ 0.000000] OF: reserved mem: 0x00000000a0100000..0x00000000a0ffffff (15360 KiB) nomap non-reusable r5f-memory@a0100000
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a1000000, size 1 MiB
[ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@a1000000, compatible id shared-dma-pool
[ 0.000000] OF: reserved mem: 0x00000000a1000000..0x00000000a10fffff (1024 KiB) nomap non-reusable r5f-dma-memory@a1000000
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a1100000, size 15 MiB
[ 0.000000] OF: reserved mem: initialized node r5f-memory@a1100000, compatible id shared-dma-pool
[ 0.000000] OF: reserved mem: 0x00000000a1100000..0x00000000a1ffffff (15360 KiB) nomap non-reusable r5f-memory@a1100000
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a2000000, size 1 MiB
[ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@a2000000, compatible id shared-dma-pool
[ 0.000000] OF: reserved mem: 0x00000000a2000000..0x00000000a20fffff (1024 KiB) nomap non-reusable r5f-dma-memory@a2000000
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a2100000, size 15 MiB
[ 0.000000] OF: reserved mem: initialized node r5f-memory@a2100000, compatible id shared-dma-pool
[ 0.000000] OF: reserved mem: 0x00000000a2100000..0x00000000a2ffffff (15360 KiB) nomap non-reusable r5f-memory@a2100000
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a3000000, size 1 MiB
[ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@a3000000, compatible id shared-dma-pool
[ 0.000000] OF: reserved mem: 0x00000000a3000000..0x00000000a30fffff (1024 KiB) nomap non-reusable r5f-dma-memory@a3000000
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a3100000, size 15 MiB
[ 0.000000] OF: reserved mem: initialized node r5f-memory@a3100000, compatible id shared-dma-pool
[ 0.000000] OF: reserved mem: 0x00000000a3100000..0x00000000a3ffffff (15360 KiB) nomap non-reusable r5f-memory@a3100000
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a4000000, size 1 MiB
[ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@a4000000, compatible id shared-dma-pool
[ 0.000000] OF: reserved mem: 0x00000000a4000000..0x00000000a40fffff (1024 KiB) nomap non-reusable r5f-dma-memory@a4000000
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a4100000, size 15 MiB
[ 0.000000] OF: reserved mem: initialized node r5f-memory@a4100000, compatible id shared-dma-pool
[ 0.000000] OF: reserved mem: 0x00000000a4100000..0x00000000a4ffffff (15360 KiB) nomap non-reusable r5f-memory@a4100000
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a5000000, size 1 MiB
[ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@a5000000, compatible id shared-dma-pool
[ 0.000000] OF: reserved mem: 0x00000000a5000000..0x00000000a50fffff (1024 KiB) nomap non-reusable r5f-dma-memory@a5000000
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a5100000, size 15 MiB
[ 0.000000] OF: reserved mem: initialized node r5f-memory@a5100000, compatible id shared-dma-pool
[ 0.000000] OF: reserved mem: 0x00000000a5100000..0x00000000a5ffffff (15360 KiB) nomap non-reusable r5f-memory@a5100000
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a6000000, size 1 MiB
[ 0.000000] OF: reserved mem: initialized node c66-dma-memory@a6000000, compatible id shared-dma-pool
[ 0.000000] OF: reserved mem: 0x00000000a6000000..0x00000000a60fffff (1024 KiB) nomap non-reusable c66-dma-memory@a6000000
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a6100000, size 15 MiB
[ 0.000000] OF: reserved mem: initialized node c66-memory@a6100000, compatible id shared-dma-pool
[ 0.000000] OF: reserved mem: 0x00000000a6100000..0x00000000a6ffffff (15360 KiB) nomap non-reusable c66-memory@a6100000
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a7000000, size 1 MiB
[ 0.000000] OF: reserved mem: initialized node c66-dma-memory@a7000000, compatible id shared-dma-pool
[ 0.000000] OF: reserved mem: 0x00000000a7000000..0x00000000a70fffff (1024 KiB) nomap non-reusable c66-dma-memory@a7000000
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a7100000, size 15 MiB
[ 0.000000] OF: reserved mem: initialized node c66-memory@a7100000, compatible id shared-dma-pool
[ 0.000000] OF: reserved mem: 0x00000000a7100000..0x00000000a7ffffff (15360 KiB) nomap non-reusable c66-memory@a7100000
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a8000000, size 1 MiB
[ 0.000000] OF: reserved mem: initialized node c71-dma-memory@a8000000, compatible id shared-dma-pool
[ 0.000000] OF: reserved mem: 0x00000000a8000000..0x00000000a80fffff (1024 KiB) nomap non-reusable c71-dma-memory@a8000000
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a8100000, size 15 MiB
[ 0.000000] OF: reserved mem: initialized node c71-memory@a8100000, compatible id shared-dma-pool
[ 0.000000] OF: reserved mem: 0x00000000a8100000..0x00000000a8ffffff (15360 KiB) nomap non-reusable c71-memory@a8100000
[ 0.000000] OF: reserved mem: 0x00000000aa000000..0x00000000abbfffff (28672 KiB) nomap non-reusable ipc-memories@aa000000
[ 0.000000] NUMA: No NUMA configuration found
[ 0.000000] NUMA: Faking a node at [mem 0x0000000080000000-0x00000008ffffffff]
[ 0.000000] NUMA: NODE_DATA [mem 0x8ff7d89c0-0x8ff7dafff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff]
[ 0.000000] DMA32 empty
[ 0.000000] Normal [mem 0x0000000100000000-0x00000008ffffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000080000000-0x000000009e7fffff]
[ 0.000000] node 0: [mem 0x000000009e800000-0x00000000a8ffffff]
[ 0.000000] node 0: [mem 0x00000000a9000000-0x00000000a9ffffff]
[ 0.000000] node 0: [mem 0x00000000aa000000-0x00000000abbfffff]
[ 0.000000] node 0: [mem 0x00000000abc00000-0x00000000ffffffff]
[ 0.000000] node 0: [mem 0x0000000880000000-0x00000008ffffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x00000008ffffffff]
[ 0.000000] cma: Reserved 32 MiB at 0x00000000fe000000 on node -1
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.1 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: Trusted OS migration not required
[ 0.000000] psci: SMC Calling Convention v1.4
[ 0.000000] percpu: Embedded 22 pages/cpu s50664 r8192 d31256 u90112
[ 0.000000] Detected PIPT I-cache on CPU0
[ 0.000000] CPU features: detected: GIC system register CPU interface
[ 0.000000] CPU features: detected: Spectre-v3a
[ 0.000000] CPU features: detected: Spectre-BHB
[ 0.000000] CPU features: detected: ARM erratum 1742098
[ 0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
[ 0.000000] alternatives: applying boot alternatives
[ 0.000000] Kernel command line: console=ttyS2,115200n8 earlyprintk=serial,ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000 rootwait fsck.mode=skip sysrq_always_enabled ip=:::::eth0:dhcp root=/dev/nfs rw nfsroot=192.168.0.1:/opt/NFS_exports/linux/j721e-idk-gw/autofs/5b50ed8fc16d4492c177b239bf042601,nolock,v3,tcp,rsize=4096,wsize=4096
[ 0.000000] sysrq: sysrq always enabled.
[ 0.000000] Unknown kernel command line parameters "earlyprintk=serial,ttyS2,115200n8", will be passed to user space.
[ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.000000] Fallback order for Node 0: 0
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1032192
[ 0.000000] Policy zone: Normal
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] software IO TLB: area num 2.
[ 0.000000] software IO TLB: mapped [mem 0x00000000fa000000-0x00000000fe000000] (64MB)
[ 0.000000] Memory: 3772156K/4194304K available (16704K kernel code, 4344K rwdata, 10816K rodata, 9408K init, 605K bss, 389380K reserved, 32768K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000] rcu: RCU event tracing is enabled.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=2.
[ 0.000000] Trampoline variant of Tasks RCU enabled.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[ 0.000000] GICv3: 960 SPIs implemented
[ 0.000000] GICv3: 0 Extended SPIs implemented
[ 0.000000] Root IRQ handler: gic_handle_irq
[ 0.000000] GICv3: GICv3 features: 16 PPIs
[ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000001900000
[ 0.000000] ITS [mem 0x01820000-0x0182ffff]
[ 0.000000] GIC: enabling workaround for ITS: Socionext Synquacer pre-ITS
[ 0.000000] ITS@0x0000000001820000: Devices Table too large, reduce ids 20->19
[ 0.000000] ITS@0x0000000001820000: allocated 524288 Devices @880800000 (flat, esz 8, psz 64K, shr 0)
[ 0.000000] ITS: using cache flushing for cmd queue
[ 0.000000] GICv3: using LPI property table @0x0000000880040000
[ 0.000000] GIC: using cache flushing for LPI property table
[ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x0000000880050000
[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.000000] arch_timer: cp15 timer(s) running at 200.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0x3ffffffffffffff max_cycles: 0x2e2049d3e8, max_idle_ns: 440795210634 ns
[ 0.000000] sched_clock: 58 bits at 200MHz, resolution 5ns, wraps every 4398046511102ns
[ 0.009247] Console: colour dummy device 80x25
[ 0.013830] Calibrating delay loop (skipped), value calculated using timer frequency.. 400.00 BogoMIPS (lpj=800000)
[ 0.024502] pid_max: default: 32768 minimum: 301
[ 0.029249] LSM: initializing lsm=capability,integrity
[ 0.034555] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.042127] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.050973] RCU Tasks: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1.
[ 0.058229] RCU Tasks Trace: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1.
[ 0.066082] rcu: Hierarchical SRCU implementation.
[ 0.070978] rcu: Max phase no-delay instances is 1000.
[ 0.076492] Platform MSI: msi-controller@1820000 domain created
[ 0.082729] PCI/MSI: /bus@100000/interrupt-controller@1800000/msi-controller@1820000 domain created
[ 0.092058] fsl-mc MSI: msi-controller@1820000 domain created
[ 0.099608] EFI services will not be available.
[ 0.104341] smp: Bringing up secondary CPUs ...
I/TC: Secondary CPU 1 initializing
I/TC: Secondary CPU 1 switching to normal world boot
[ 0.117539] Detected PIPT I-cache on CPU1
[ 0.117584] GICv3: CPU1: found redistributor 1 region 0:0x0000000001920000
[ 0.117596] GICv3: CPU1: using allocated LPI pending table @0x0000000880060000
[ 0.117627] CPU1: Booted secondary processor 0x0000000001 [0x411fd080]
[ 0.117678] smp: Brought up 1 node, 2 CPUs
[ 0.147025] SMP: Total of 2 processors activated.
[ 0.151829] CPU features: detected: 32-bit EL0 Support
[ 0.157082] CPU features: detected: 32-bit EL1 Support
[ 0.162332] CPU features: detected: CRC32 instructions
[ 0.198093] CPU: All CPU(s) started at EL2
[ 0.202316] alternatives: applying system-wide alternatives
[ 0.209295] devtmpfs: initialized
[ 0.219357] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.229333] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
[ 0.236865] pinctrl core: initialized pinctrl subsystem
[ 0.243481] DMI not present or invalid.
[ 0.247806] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.254336] DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations
[ 0.261651] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.269690] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.277812] audit: initializing netlink subsys (disabled)
[ 0.283410] audit: type=2000 audit(0.180:1): state=initialized audit_enabled=0 res=1
[ 0.284232] thermal_sys: Registered thermal governor 'step_wise'
[ 0.291340] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.297513] cpuidle: using governor menu
[ 0.308305] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.315269] ASID allocator initialised with 65536 entries
[ 0.321925] Serial: AMBA PL011 UART driver
[ 0.343987] platform 4a00000.dss: Fixed dependency cycle(s) with /bus@100000/dp-bridge@a000000/ports/port@0/endpoint
[ 0.358542] platform connector: Fixed dependency cycle(s) with /bus@100000/dp-bridge@a000000/ports/port@4/endpoint
[ 0.369409] Modules: 22256 pages in range for non-PLT usage
[ 0.369413] Modules: 513776 pages in range for PLT usage
[ 0.375525] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.387888] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page
[ 0.394290] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages
[ 0.401224] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page
[ 0.407626] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.414559] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page
[ 0.420961] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages
[ 0.427895] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page
[ 0.435270] ACPI: Interpreter disabled.
[ 0.440865] k3-chipinfo 43000014.chipid: Family:J721E rev:SR1.0 JTAGID[0x0bb6402f] Detected
[ 0.450033] iommu: Default domain type: Translated
[ 0.454935] iommu: DMA domain TLB invalidation policy: strict mode
[ 0.461373] SCSI subsystem initialized
[ 0.465363] usbcore: registered new interface driver usbfs
[ 0.470981] usbcore: registered new interface driver hub
[ 0.476420] usbcore: registered new device driver usb
[ 0.482406] pps_core: LinuxPPS API ver. 1 registered
[ 0.487478] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.496815] PTP clock support registered
[ 0.500930] EDAC MC: Ver: 3.0.0
[ 0.504590] scmi_core: SCMI protocol bus registered
[ 0.510318] FPGA manager framework
[ 0.513838] Advanced Linux Sound Architecture Driver Initialized.
[ 0.520542] vgaarb: loaded
[ 0.523727] clocksource: Switched to clocksource arch_sys_counter
[ 0.530085] VFS: Disk quotas dquot_6.6.0
[ 0.534104] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.541212] pnp: PnP ACPI: disabled
[ 0.547911] NET: Registered PF_INET protocol family
[ 0.553036] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.562122] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
[ 0.570868] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.578790] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.586988] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes, linear)
[ 0.595501] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.602273] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
[ 0.609197] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
[ 0.616633] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.622731] RPC: Registered named UNIX socket transport module.
[ 0.628789] RPC: Registered udp transport module.
[ 0.633593] RPC: Registered tcp transport module.
[ 0.638396] RPC: Registered tcp-with-tls transport module.
[ 0.643998] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.650585] PCI: CLS 0 bytes, default 64
[ 0.654789] kvm [1]: IPA Size Limit: 44 bits
[ 0.660029] kvm [1]: vgic-v2@6f020000
[ 0.663787] kvm [1]: GIC system register CPU interface enabled
[ 0.669760] kvm [1]: vgic interrupt IRQ9
[ 0.673779] kvm [1]: Hyp mode initialized successfully
[ 0.679700] Initialise system trusted keyrings
[ 0.684370] workingset: timestamp_bits=42 max_order=20 bucket_order=0
[ 0.691120] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.697220] NFS: Registering the id_resolver key type
[ 0.702393] Key type id_resolver registered
[ 0.706665] Key type id_legacy registered
[ 0.710766] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 0.717621] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
[ 0.725254] 9p: Installing v9fs 9p2000 file system support
[ 0.751892] Key type asymmetric registered
[ 0.756076] Asymmetric key parser 'x509' registered
[ 0.761081] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
[ 0.768645] io scheduler mq-deadline registered
[ 0.773271] io scheduler kyber registered
[ 0.777388] io scheduler bfq registered
[ 0.787975] pinctrl-single 4301c000.pinctrl: 94 pins, size 376
[ 0.794375] pinctrl-single 11c000.pinctrl: 173 pins, size 692
[ 0.800727] pinctrl-single 104200.pinctrl: 20 pins, size 80
[ 0.806488] pinctrl-single 104280.pinctrl: 8 pins, size 32
[ 0.818081] EINJ: ACPI disabled.
[ 0.844443] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.853388] msm_serial: driver initialized
[ 0.857856] SuperH (H)SCI(F) driver initialized
[ 0.862628] STM32 USART driver initialized
[ 0.868701] arm-smmu-v3 36600000.iommu: ias 48-bit, oas 48-bit (features 0x00001faf)
[ 0.876877] arm-smmu-v3 36600000.iommu: allocated 65536 entries for cmdq
[ 0.883905] arm-smmu-v3 36600000.iommu: allocated 32768 entries for evtq
[ 0.891582] arm-smmu-v3 36600000.iommu: msi_domain absent - falling back to wired irqs
[ 0.902880] loop: module loaded
[ 0.906976] megasas: 07.727.03.00-rc1
[ 0.915565] tun: Universal TUN/TAP device driver, 1.6
[ 0.921561] thunder_xcv, ver 1.0
[ 0.924879] thunder_bgx, ver 1.0
[ 0.928182] nicpf, ver 1.0
[ 0.931938] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version
[ 0.939319] hns3: Copyright (c) 2017 Huawei Corporation.
[ 0.944764] hclge is initializing
[ 0.948163] e1000: Intel(R) PRO/1000 Network Driver
[ 0.953147] e1000: Copyright (c) 1999-2006 Intel Corporation.
[ 0.959027] e1000e: Intel(R) PRO/1000 Network Driver
[ 0.964103] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 0.970182] igb: Intel(R) Gigabit Ethernet Network Driver
[ 0.975700] igb: Copyright (c) 2007-2014 Intel Corporation.
[ 0.981406] igbvf: Intel(R) Gigabit Virtual Function Network Driver
[ 0.987809] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
[ 0.994144] sky2: driver version 1.30
[ 0.999033] VFIO - User Level meta-driver version: 0.3
[ 1.006656] usbcore: registered new interface driver usb-storage
[ 1.015089] i2c_dev: i2c /dev entries driver
[ 1.025145] sdhci: Secure Digital Host Controller Interface driver
[ 1.031484] sdhci: Copyright(c) Pierre Ossman
[ 1.036585] Synopsys Designware Multimedia Card Interface Driver
[ 1.043502] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.050837] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.057587] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping ....
[ 1.064979] usbcore: registered new interface driver usbhid
[ 1.070680] usbhid: USB HID core driver
[ 1.077244] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
[ 1.087321] optee: probing for conduit method.
I/TC: Reserved shared memory is enabled
I/TC: Dynamic shared memory is enabled
I/TC: Normal World virtualization support is disabled
I/TC: Asynchronous notifications are disabled
[ 1.091881] optee: revision 4.0 (37f820d6)
[ 1.108323] optee: dynamic shared memory is enabled
[ 1.117911] random: crng init done
[ 1.121450] optee: initialized driver
[ 1.125441] mmio-mux 47000004.mux-controller: failed to get regmap: -19
[ 1.134719] NET: Registered PF_PACKET protocol family
[ 1.139952] 9pnet: Installing 9P2000 support
[ 1.144344] Key type dns_resolver registered
[ 1.152609] registered taskstats version 1
[ 1.157037] Loading compiled-in X.509 certificates
[ 1.182901] ti-sci 44083000.system-controller: ABI: 3.1 (firmware rev 0x0009 '9.1.2--v09.01.02 (Kool Koala)')
[ 1.305580] omap_i2c 42120000.i2c: bus 0 rev0.12 at 400 kHz
[ 1.312125] pca953x 1-0020: supply vcc not found, using dummy regulator
[ 1.318952] pca953x 1-0020: using no AI
[ 1.344444] pca953x 1-0022: supply vcc not found, using dummy regulator
[ 1.351257] pca953x 1-0022: using AI
[ 1.356401] omap_i2c 2000000.i2c: bus 1 rev0.12 at 400 kHz
[ 1.362854] omap_i2c 2010000.i2c: bus 2 rev0.12 at 400 kHz
[ 1.369201] pca953x 3-0020: supply vcc not found, using dummy regulator
[ 1.376029] pca953x 3-0020: using no AI
[ 1.404220] omap_i2c 2030000.i2c: bus 3 rev0.12 at 400 kHz
[ 1.410692] pca953x 4-0020: supply vcc not found, using dummy regulator
[ 1.417526] pca953x 4-0020: using no AI
[ 1.444055] omap_i2c 2060000.i2c: bus 4 rev0.12 at 400 kHz
[ 1.450013] ti-sci-intr 42200000.interrupt-controller: Interrupt Router 137 domain created
[ 1.458692] ti-sci-intr bus@100000:interrupt-controller@a00000: Interrupt Router 131 domain created
[ 1.468153] ti-sci-intr 310e0000.interrupt-controller: Interrupt Router 213 domain created
[ 1.476874] ti-sci-inta 33d00000.interrupt-controller: Interrupt Aggregator domain 209 created
[ 1.488656] k3-ringacc 2b800000.ringacc: Ring Accelerator probed rings:286, gp-rings[96,20] sci-dev-id:235
[ 1.498558] k3-ringacc 2b800000.ringacc: dma-ring-reset-quirk: disabled
[ 1.505321] k3-ringacc 2b800000.ringacc: RA Proxy rev. 66346100, num_proxies:64
[ 1.515554] k3-ringacc 3c000000.ringacc: Ring Accelerator probed rings:1024, gp-rings[440,150] sci-dev-id:211
[ 1.525729] k3-ringacc 3c000000.ringacc: dma-ring-reset-quirk: disabled
[ 1.532488] k3-ringacc 3c000000.ringacc: RA Proxy rev. 66346100, num_proxies:64
[ 1.541296] 40a00000.serial: ttyS1 at MMIO 0x40a00000 (irq = 213, base_baud = 6000000) is a 8250
[ 1.551645] 2800000.serial: ttyS2 at MMIO 0x2800000 (irq = 214, base_baud = 3000000) is a 8250
[ 1.560560] printk: legacy console [ttyS2] enabled
[ 1.560560] printk: legacy console [ttyS2] enabled
[ 1.570238] printk: legacy bootconsole [ns16550a0] disabled
[ 1.570238] printk: legacy bootconsole [ns16550a0] disabled
[ 1.585094] 2810000.serial: ttyS3 at MMIO 0x2810000 (irq = 215, base_baud = 3000000) is a 8250
[ 1.595082] 2820000.serial: ttyS0 at MMIO 0x2820000 (irq = 216, base_baud = 3000000) is a 8250
[ 1.604756] omap8250 2840000.serial: unable to register 8250 port
[ 1.610919] omap8250: probe of 2840000.serial failed with error -28
[ 1.619269] davinci_mdio 46000f00.mdio: Configuring MDIO in manual mode
[ 1.663739] davinci_mdio 46000f00.mdio: davinci mdio revision 9.7, bus freq 1000000
[ 1.673356] davinci_mdio 46000f00.mdio: phy[0]: device 46000f00.mdio:00, driver TI DP83867
[ 1.681633] am65-cpsw-nuss 46000000.ethernet: initializing am65 cpsw nuss version 0x6BA00101, cpsw version 0x6BA80100 Ports: 2 quirks:00000000
[ 1.694445] am65-cpsw-nuss 46000000.ethernet: initialized cpsw ale version 1.4
[ 1.701652] am65-cpsw-nuss 46000000.ethernet: ALE Table size 64
[ 1.710185] davinci_mdio c000f00.mdio: Configuring MDIO in manual mode
[ 1.883729] davinci_mdio c000f00.mdio: davinci mdio revision 9.7, bus freq 1000000
[ 1.901390] davinci_mdio c000f00.mdio: phy[16]: device c000f00.mdio:10, driver Microsemi GE VSC8514 SyncE
[ 1.910949] davinci_mdio c000f00.mdio: phy[17]: device c000f00.mdio:11, driver Microsemi GE VSC8514 SyncE
[ 1.920496] davinci_mdio c000f00.mdio: phy[18]: device c000f00.mdio:12, driver Microsemi GE VSC8514 SyncE
[ 1.930041] davinci_mdio c000f00.mdio: phy[19]: device c000f00.mdio:13, driver Microsemi GE VSC8514 SyncE
[ 1.939610] am65-cpsw-nuss c000000.ethernet: initializing am65 cpsw nuss version 0x6BA01901, cpsw version 0x6BA80101 Ports: 9 quirks:00000000
[ 1.952463] am65-cpsw-nuss c000000.ethernet: initialized cpsw ale version 1.4
[ 1.959607] am65-cpsw-nuss c000000.ethernet: ALE Table size 512
[ 1.970008] mmc0: CQHCI version 5.10
[ 1.978798] pca953x 2-0020: supply vcc not found, using dummy regulator
[ 1.985606] pca953x 2-0020: using no AI
[ 2.013582] ti-udma 285c0000.dma-controller: Channels: 26 (tchan: 13, rchan: 13, gp-rflow: 8)
[ 2.014344] mmc0: SDHCI controller on 4f80000.mmc [4f80000.mmc] using ADMA 64-bit
[ 2.025395] ti-udma 31150000.dma-controller: Channels: 122 (tchan: 61, rchan: 61, gp-rflow: 16)
[ 2.042877] davinci_mdio 46000f00.mdio: Configuring MDIO in manual mode
[ 2.087732] davinci_mdio 46000f00.mdio: davinci mdio revision 9.7, bus freq 1000000
[ 2.097308] davinci_mdio 46000f00.mdio: phy[0]: device 46000f00.mdio:00, driver TI DP83867
[ 2.105584] am65-cpsw-nuss 46000000.ethernet: initializing am65 cpsw nuss version 0x6BA00101, cpsw version 0x6BA80100 Ports: 2 quirks:00000000
[ 2.118404] am65-cpsw-nuss 46000000.ethernet: initialized cpsw ale version 1.4
[ 2.125617] am65-cpsw-nuss 46000000.ethernet: ALE Table size 64
[ 2.132904] am65-cpsw-nuss 46000000.ethernet: set new flow-id-base 48
[ 2.142228] davinci_mdio c000f00.mdio: Configuring MDIO in manual mode
[ 2.158286] mmc0: Command Queue Engine enabled
[ 2.162731] mmc0: new HS200 MMC card at address 0001
[ 2.168019] mmcblk0: mmc0:0001 S0J56X 14.8 GiB
[ 2.173393] mmcblk0: p1 p2 p3
[ 2.176782] mmcblk0boot0: mmc0:0001 S0J56X 31.5 MiB
[ 2.182249] mmcblk0boot1: mmc0:0001 S0J56X 31.5 MiB
[ 2.187704] mmcblk0rpmb: mmc0:0001 S0J56X 4.00 MiB, chardev (234:0)
[ 2.315730] davinci_mdio c000f00.mdio: davinci mdio revision 9.7, bus freq 1000000
[ 2.333505] davinci_mdio c000f00.mdio: phy[16]: device c000f00.mdio:10, driver Microsemi GE VSC8514 SyncE
[ 2.343061] davinci_mdio c000f00.mdio: phy[17]: device c000f00.mdio:11, driver Microsemi GE VSC8514 SyncE
[ 2.352608] davinci_mdio c000f00.mdio: phy[18]: device c000f00.mdio:12, driver Microsemi GE VSC8514 SyncE
[ 2.362153] davinci_mdio c000f00.mdio: phy[19]: device c000f00.mdio:13, driver Microsemi GE VSC8514 SyncE
[ 2.371728] am65-cpsw-nuss c000000.ethernet: initializing am65 cpsw nuss version 0x6BA01901, cpsw version 0x6BA80101 Ports: 9 quirks:00000000
[ 2.384573] am65-cpsw-nuss c000000.ethernet: initialized cpsw ale version 1.4
[ 2.391710] am65-cpsw-nuss c000000.ethernet: ALE Table size 512
[ 2.399544] am65-cpsw-nuss c000000.ethernet: set new flow-id-base 140
[ 2.410922] mmc1: CQHCI version 5.10
[ 2.412650] input: gpio-keys as /devices/platform/gpio-keys/input/input0
[ 2.451734] mmc1: SDHCI controller on 4fb0000.mmc [4fb0000.mmc] using ADMA 64-bit
[ 2.466068] am65-cpsw-nuss 46000000.ethernet eth0: PHY [46000f00.mdio:00] driver [TI DP83867] (irq=POLL)
[ 2.475539] am65-cpsw-nuss 46000000.ethernet eth0: configuring for phy/rgmii-rxid link mode
[ 2.514648] mmc1: new ultra high speed DDR50 SDHC card at address aaaa
[ 2.521570] mmcblk1: mmc1:aaaa SC16G 14.8 GiB
[ 2.530320] mmcblk1: p1 p2 p3
[ 6.564501] am65-cpsw-nuss 46000000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[ 6.595728] Sending DHCP requests ., OK
[ 6.615565] IP-Config: Got DHCP answer from 192.168.0.1, my address is 192.168.0.30
[ 6.623211] IP-Config: Complete:
[ 6.626428] device=eth0, hwaddr=78:db:2f:e0:81:ed, ipaddr=192.168.0.30, mask=255.255.255.0, gw=192.168.0.1
[ 6.636497] host=j721e-idk-gw, domain=eptf.internal.ti.com, nis-domain=(none)
[ 6.644048] bootserver=192.168.0.1, rootserver=192.168.0.1, rootpath=
[ 6.644051] nameserver0=192.0.2.2, nameserver1=192.0.2.3
[ 6.656742] clk: Disabling unused clocks
[ 6.686046] ALSA device list:
[ 6.689013] No soundcards found.
[ 6.728906] VFS: Mounted root (nfs filesystem) on device 0:21.
[ 6.735006] devtmpfs: mounted
[ 6.742349] Freeing unused kernel memory: 9408K
[ 6.751807] Run /sbin/init as init process
[ 7.270678] systemd[1]: System time before build time, advancing clock.
[ 7.316008] NET: Registered PF_INET6 protocol family
[ 7.321861] Segment Routing with IPv6
[ 7.325860] In-situ OAM (IOAM) with IPv6
[ 7.385165] systemd[1]: systemd 250.5+ running in system mode (+PAM -AUDIT -SELINUX -APPARMOR +IMA -SMACK +SECCOMP -GCRYPT -GNUTLS -OPENSSL +ACL +BLKID -CURL -ELFUTILS -FIDO2 -IDN2 -IDN -IPTC +KMOD -LIBCRYPTSETUP +LIBFDISK -PCRE2 -PWQUALITY -P11KIT -QRENCODE -BZIP2 -LZ4 -XZ -ZLIB +ZSTD -BPF_FRAMEWORK +XKBCOMMON +UTMP +SYSVINIT default-hierarchy=hybrid)
[ 7.416578] systemd[1]: Detected architecture arm64.
Welcome to [1mArago 2023.04[0m!
[ 7.498239] systemd[1]: Hostname set to <am65xx-evm>.
[ 7.665100] systemd-sysv-generator[96]: SysV service '/etc/init.d/sysrepo' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
[ 7.690897] systemd-sysv-generator[96]: SysV service '/etc/init.d/thermal-zone-init' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
[ 7.715946] systemd-sysv-generator[96]: SysV service '/etc/init.d/netopeer2-server' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
[ 7.744977] systemd[87]: /lib/systemd/system-generators/systemd-gpt-auto-generator failed with exit status 1.
[ 8.022413] systemd[1]: /lib/systemd/system/bt-enable.service:9: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether.
[ 8.124536] systemd[1]: /etc/systemd/system/sync-clocks.service:11: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether.
[ 8.202964] systemd[1]: Queued start job for default target Graphical Interface.
[ 8.244446] systemd[1]: Created slice Slice /system/getty.
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment