-
-
Save nmenon/f5be177bdbe7537fbfc7b42cd36d430a to your computer and use it in GitHub Desktop.
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| U-Boot SPL 2021.01-ge18343eb (Mar 02 2023 - 15:51:35 +0000) | |
| SYSFW ABI: 3.1 (firmware rev 0x0008 '8.6.4--v08.06.04 (Chill Capybar') | |
| SPL initial stack usage: 13424 bytes | |
| Trying to boot from MMC1 | |
| Loading Environment from MMC... MMC: block number 0x3500 exceeds max(0x2000) | |
| *** Warning - !read failed, using default environment | |
| init_env from device 9 not supported! | |
| Starting ATF on ARM64 core... | |
| NOTICE: BL31: v2.7(release):v2.7.0-519-gc19116dd6 | |
| NOTICE: BL31: Built : 15:51:35, Mar 2 2023 | |
| I/TC: | |
| I/TC: OP-TEE version: 3.19.0-rc1 (gcc version 10.2.1 20210110 (Debian 10.2.1-6)) #1 Thu Mar 2 15:51:35 UTC 2023 aarch64 | |
| I/TC: WARNING: This OP-TEE configuration might be insecure! | |
| I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html | |
| I/TC: Primary CPU initializing | |
| I/TC: SYSFW ABI: 3.1 (firmware rev 0x0008 '8.6.4--v08.06.04 (Chill Capybar') | |
| I/TC: HUK Initialized | |
| I/TC: Primary CPU switching to normal world boot | |
| U-Boot SPL 2021.01-ge18343eb (Mar 02 2023 - 15:51:35 +0000) | |
| SYSFW ABI: 3.1 (firmware rev 0x0008 '8.6.4--v08.06.04 (Chill Capybar') | |
| Trying to boot from MMC1 | |
| U-Boot 2021.01-ge18343eb (Mar 02 2023 - 15:51:35 +0000) | |
| SoC: AM62X SR1.0 GP | |
| Model: BeagleBoard.org BeaglePlay | |
| Board: BEAGLEPLAY-A0- rev 02 | |
| DRAM: 2 GiB | |
| MMC: mmc@fa10000: 0, mmc@fa00000: 1, mmc@fa20000: 2 | |
| Loading Environment from MMC... MMC: block number 0x3500 exceeds max(0x2000) | |
| *** Warning - !read failed, using default environment | |
| In: serial@2800000 | |
| Out: serial@2800000 | |
| Err: serial@2800000 | |
| Error: Can't set serial# to SSSS | |
| Net: Could not get PHY for ethernet@8000000port@1: addr 0 | |
| am65_cpsw_nuss_port ethernet@8000000port@1: phy_connect() failed | |
| No ethernet found. | |
| Press SPACE to abort autoboot in 2 seconds | |
| switch to partitions #0, OK | |
| mmc1 is current device | |
| Scanning mmc 1:1... | |
| Found /extlinux/extlinux.conf | |
| Retrieving file: /extlinux/extlinux.conf | |
| 192 bytes read in 7 ms (26.4 KiB/s) | |
| 1: Linux microSD | |
| Retrieving file: /initrd.img | |
| 15406078 bytes read in 665 ms (22.1 MiB/s) | |
| Retrieving file: /Image | |
| 21715456 bytes read in 944 ms (21.9 MiB/s) | |
| append: root=/dev/mmcblk1p2 ro rootfstype=ext4 rootwait net.ifnames=0 quiet | |
| Retrieving file: /k3-am625-beagleplay.dtb | |
| 33836 bytes read in 8 ms (4 MiB/s) | |
| ## Flattened Device Tree blob at 88000000 | |
| Booting using the fdt blob at 0x88000000 | |
| Loading Ramdisk to 8f14e000, end 8ffff3fe ... OK | |
| Loading Device Tree to 000000008f142000, end 000000008f14d42b ... OK | |
| Starting kernel ... | |
| I/TC: Secondary CPU 1 initializing | |
| I/TC: Secondary CPU 1 switching to normal world boot | |
| I/TC: Secondary CPU 2 initializing | |
| I/TC: Secondary CPU 2 switching to normal world boot | |
| I/TC: Secondary CPU 3 initializing | |
| I/TC: Secondary CPU 3 switching to normal world boot | |
| [ 0.269553] am65-cpsw-nuss 8000000.ethernet: Use random MAC address | |
| [ 0.840992] hid-generic 0003:046D:C548.0003: device has no listeners, quitting | |
| [ OK ] Finished Tell Plymouth To Write Out Runtime Data. | |
| [ OK ] Finished Set console font and keymap. | |
| [ OK ] Finished Create Volatile Files and Directories. | |
| Starting Network Name Resolution... | |
| Starting Network Time Synchronization... | |
| Starting Update UTMP about System Boot/Shutdown... | |
| [ OK ] Finished Update UTMP about System Boot/Shutdown. | |
| [ OK ] Finished Raise network interfaces. | |
| [ OK ] Started Network Time Synchronization. | |
| [ OK ] Reached target System Initialization. | |
| [ OK ] Started Daily Cleanup of Temporary Directories. | |
| [ OK ] Reached target System Time Set. | |
| [ OK ] Reached target System Time Synchronized. | |
| [ OK ] Started Periodic ext4 Onli ata Check for All Filesystems. | |
| [ OK ] Started Discard unused blocks once a week. | |
| [ OK ] Started Daily rotation of log files. | |
| [ OK ] Reached target Timers. | |
| [ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket. | |
| [ OK ] Listening on D-Bus System Message Bus Socket. | |
| Starting Docker Socket for the API. | |
| K[ OK ] Listening on GPS (Global P ioning System) Daemon Sockets. | |
| [ OK ] Listening on Docker Socket for the API. | |
| [ OK ] Reached target Sockets. | |
| [ OK ] Reached target Basic System. | |
| [ OK ] Listening on Load/Save RF itch Status /dev/rfkill Watch. | |
| Starting Avahi mDNS/DNS-SD Stack... | |
| Starting BeagleBoard Generate Symlinks... | |
| Starting BeagleBoard.org USB gadgets... | |
| [ OK ] Started Regular background program processing daemon. | |
| [ OK ] Started D-Bus System Message Bus. | |
| Starting dphys-swapfile - unt, and delete a swap file... | |
| Starting Remove Stale Onli t4 Metadata Check Snapshots... | |
| Starting Initialize hardware monitoring sensors... | |
| Starting System Logging Service... | |
| Starting User Login Management... | |
| Starting LSB: Start daemon at boot time... | |
| Starting Disk Manager... | |
| Starting WPA supplicant... | |
| [ OK ] Finished BeagleBoard Generate Symlinks. | |
| [ OK ] Finished Initialize hardware monitoring sensors. | |
| [ OK ] Started System Logging Service. | |
| [ OK ] Started Network Name Resolution. | |
| [ OK ] Reached target Host and Network Name Lookups. | |
| [ OK ] Started LSB: Start daemon at boot time. | |
| [ OK ] Found device /dev/ttyGS0. | |
| [ OK ] Finished dphys-swapfile - mount, and delete a swap file. | |
| [ OK ] Started User Login Management. | |
| [ OK ] Started Avahi mDNS/DNS-SD Stack. | |
| [ OK ] Started WPA supplicant. | |
| [ OK ] Reached target Network. | |
| [ OK ] Reached target Network is Online. | |
| Starting BeagleBoard.org Code Server... | |
| Starting Beagle Flasher Shutdown... | |
| Starting containerd container runtime... | |
| Starting LSB: disk temperature monitoring daemon... | |
| Starting A high performanc and a reverse proxy server... | |
| Starting OpenBSD Secure Shell server... | |
| Starting Permit User Sessions... | |
| [ OK ] Finished Remove Stale Onli ext4 Metadata Check Snapshots. | |
| [ OK ] Finished Beagle Flasher Shutdown. | |
| [ OK ] Started LSB: disk temperature monitoring daemon. | |
| [ OK ] Finished Permit User Sessions. | |
| Starting Light Display Manager... | |
| Starting Hold until boot process finishes up... | |
| Starting Authorization Manager... | |
| Starting Load/Save RF Kill Switch Status... | |
| [ OK ] Started Load/Save RF Kill Switch Status. | |
| [ OK ] Started BeagleBoard.org Code Server. | |
| [ OK ] Started Authorization Manager. | |
| [ OK ] Created slice system-wpa_supplicant.slice. | |
| [ OK ] Started WPA supplicant dae (interface-specific version). | |
| [ OK ] Started OpenBSD Secure Shell server. | |
| [ OK ] Finished Hold until boot process finishes up. | |
| [FAILED] Failed to start Light Display Manager. | |
| [FAILED] Failed to start Docker Application Container Engine. | |
| Debian GNU/Linux 11 BeaglePlay ttyS2 | |
| BeagleBoard.org Debian Bullseye Xfce Image 2023-03-09 | |
| Support: https://bbb.io/debian | |
| default username:password is [debian:temppwd] | |
| BeaglePlay login: debian | |
| Password: | |
| The programs included with the Debian GNU/Linux system are free software; | |
| the exact distribution terms for each program are described in the | |
| individual files in /usr/share/doc/*/copyright. | |
| Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent | |
| permitted by applicable law. | |
| Last login: Fri Mar 10 09:27:49 UTC 2023 on ttyS2 | |
| debian@BeaglePlay:~$ lsmod | |
| Module Size Used by | |
| br_netfilter 28672 0 | |
| bridge 266240 1 br_netfilter | |
| stp 12288 1 bridge | |
| llc 16384 2 bridge,stp | |
| overlay 122880 0 | |
| usb_f_mass_storage 49152 2 | |
| usb_f_acm 16384 2 | |
| u_serial 20480 3 usb_f_acm | |
| wl18xx 118784 0 | |
| usb_f_ncm 20480 2 | |
| wlcore 229376 1 wl18xx | |
| usb_f_rndis 28672 4 | |
| u_ether 20480 2 usb_f_rndis,usb_f_ncm | |
| mac80211 577536 2 wl18xx,wlcore | |
| libcomposite 65536 18 usb_f_rndis,usb_f_mass_storage,usb_f_acm,usb_f_ncm | |
| libarc4 12288 1 mac80211 | |
| cfg80211 401408 3 wl18xx,wlcore,mac80211 | |
| tps65219_pwrbutton 12288 0 | |
| tps65219_regulator 16384 1 | |
| rfkill 28672 4 cfg80211 | |
| crct10dif_ce 12288 1 | |
| wlcore_sdio 12288 0 | |
| rtc_ti_k3 12288 1 | |
| at24 20480 0 | |
| rtc_bq32k 12288 0 | |
| tps65219 20480 0 | |
| drm 540672 0 | |
| fuse 147456 1 | |
| ip_tables 32768 0 | |
| x_tables 40960 1 ip_tables | |
| ipv6 499712 46 bridge,br_netfilter | |
| debian@BeaglePlay:~$ cat /proc/interrupts | |
| CPU0 CPU1 CPU2 CPU3 | |
| 9: 0 0 0 0 GICv3 25 Level vgic | |
| 11: 7177 6918 6477 6579 GICv3 30 Level arch_timer | |
| 12: 0 0 0 0 GICv3 27 Level kvm guest vtimer | |
| 14: 0 0 0 0 GICv3 23 Level arm-pmu | |
| 15: 2189 0 0 0 GICv3 66 Level 4d000000.mailbox thr_012 | |
| 24: 0 0 0 0 GICv3 139 Level 4900000.i2c | |
| 25: 122 0 0 0 GICv3 193 Level 20000000.i2c | |
| 26: 0 0 0 0 GICv3 194 Level 20010000.i2c | |
| 27: 0 0 0 0 GICv3 195 Level 20020000.i2c | |
| 28: 0 0 0 0 GICv3 196 Level 20030000.i2c | |
| 117: 52 0 0 0 MSI-INTA 1970707 Level 8000000.ethernet-tx0 | |
| 207: 234 0 0 0 MSI-INTA 1971731 Level 8000000.ethernet | |
| 241: 306 0 0 0 GICv3 210 Level 2800000.serial | |
| 244: 1 0 0 0 GICv3 220 Level dwc3 | |
| 245: 43 0 0 0 GICv3 258 Level xhci-hcd:usb1 | |
| 248: 1025 0 0 0 GICv3 165 Level mmc0 | |
| 297: 0 0 0 0 GPIO 18 Edge -davinci_gpio User Key | |
| 320: 19 0 0 0 GPIO 41 Edge -davinci_gpio wl18xx | |
| 423: 0 0 0 0 GPIO 48 Edge -davinci_gpio fa00000.mmc cd | |
| 427: 18439 0 0 0 GICv3 115 Level mmc1 | |
| 428: 4173 0 0 0 GICv3 114 Level mmc2 | |
| 429: 0 0 0 0 GICv3 256 Level tps65219_irq | |
| 430: 0 0 0 0 tps65219_irq 0 Edge LDO3_SCG | |
| 431: 0 0 0 0 tps65219_irq 1 Edge LDO3_OC | |
| 432: 0 0 0 0 tps65219_irq 2 Edge LDO3_UV | |
| 433: 0 0 0 0 tps65219_irq 3 Edge LDO4_SCG | |
| 434: 0 0 0 0 tps65219_irq 4 Edge LDO4_OC | |
| 435: 0 0 0 0 tps65219_irq 5 Edge LDO4_UV | |
| 436: 0 0 0 0 tps65219_irq 6 Edge LDO1_SCG | |
| 437: 0 0 0 0 tps65219_irq 7 Edge LDO1_OC | |
| 438: 0 0 0 0 tps65219_irq 8 Edge LDO1_UV | |
| 439: 0 0 0 0 tps65219_irq 9 Edge LDO2_SCG | |
| 440: 0 0 0 0 tps65219_irq 10 Edge LDO2_OC | |
| 441: 0 0 0 0 tps65219_irq 11 Edge LDO2_UV | |
| 442: 0 0 0 0 tps65219_irq 12 Edge BUCK3_SCG | |
| 443: 0 0 0 0 tps65219_irq 13 Edge BUCK3_OC | |
| 444: 0 0 0 0 tps65219_irq 14 Edge BUCK3_NEG_OC | |
| 445: 0 0 0 0 tps65219_irq 15 Edge BUCK3_UV | |
| 446: 0 0 0 0 tps65219_irq 16 Edge BUCK1_SCG | |
| 447: 0 0 0 0 tps65219_irq 17 Edge BUCK1_OC | |
| 448: 0 0 0 0 tps65219_irq 18 Edge BUCK1_NEG_OC | |
| 449: 0 0 0 0 tps65219_irq 19 Edge BUCK1_UV | |
| 450: 0 0 0 0 tps65219_irq 20 Edge BUCK2_SCG | |
| 451: 0 0 0 0 tps65219_irq 21 Edge BUCK2_OC | |
| 452: 0 0 0 0 tps65219_irq 22 Edge BUCK2_NEG_OC | |
| 453: 0 0 0 0 tps65219_irq 23 Edge BUCK2_UV | |
| 454: 0 0 0 0 tps65219_irq 32 Edge BUCK1_RV | |
| 455: 0 0 0 0 tps65219_irq 33 Edge BUCK2_RV | |
| 456: 0 0 0 0 tps65219_irq 34 Edge BUCK3_RV | |
| 457: 0 0 0 0 tps65219_irq 35 Edge LDO1_RV | |
| 458: 0 0 0 0 tps65219_irq 36 Edge LDO2_RV | |
| 459: 0 0 0 0 tps65219_irq 37 Edge LDO3_RV | |
| 460: 0 0 0 0 tps65219_irq 38 Edge LDO4_RV | |
| 461: 0 0 0 0 tps65219_irq 39 Edge BUCK1_RV_SD | |
| 462: 0 0 0 0 tps65219_irq 40 Edge BUCK2_RV_SD | |
| 463: 0 0 0 0 tps65219_irq 41 Edge BUCK3_RV_SD | |
| 464: 0 0 0 0 tps65219_irq 42 Edge LDO1_RV_SD | |
| 465: 0 0 0 0 tps65219_irq 43 Edge LDO2_RV_SD | |
| 466: 0 0 0 0 tps65219_irq 44 Edge LDO3_RV_SD | |
| 467: 0 0 0 0 tps65219_irq 45 Edge LDO4_RV_SD | |
| 468: 0 0 0 0 tps65219_irq 46 Edge TIMEOUT | |
| 469: 0 0 0 0 tps65219_irq 24 Edge SENSOR_3_WARM | |
| 470: 0 0 0 0 tps65219_irq 25 Edge SENSOR_2_WARM | |
| 471: 0 0 0 0 tps65219_irq 26 Edge SENSOR_1_WARM | |
| 472: 0 0 0 0 tps65219_irq 27 Edge SENSOR_0_WARM | |
| 473: 0 0 0 0 tps65219_irq 28 Edge SENSOR_3_HOT | |
| 474: 0 0 0 0 tps65219_irq 29 Edge SENSOR_2_HOT | |
| 475: 0 0 0 0 tps65219_irq 30 Edge SENSOR_1_HOT | |
| 476: 0 0 0 0 tps65219_irq 31 Edge SENSOR_0_HOT | |
| 477: 0 0 0 0 tps65219_irq 47 Edge tps65219-pwrbutton.3.auto | |
| 478: 0 0 0 0 tps65219_irq 48 Edge tps65219-pwrbutton.3.auto | |
| 479: 0 0 0 0 GICv3 132 Level 2b1f0000.rtc | |
| IPI0: 1029 2016 2190 1464 Rescheduling interrupts | |
| IPI1: 3560 6961 5692 5382 Function call interrupts | |
| IPI2: 0 0 0 0 CPU stop interrupts | |
| IPI3: 0 0 0 0 CPU stop (for crash dump) interrupts | |
| IPI4: 0 0 0 0 Timer broadcast interrupts | |
| IPI5: 124 127 103 100 IRQ work interrupts | |
| IPI6: 0 0 0 0 CPU wake-up interrupts | |
| Err: 0 | |
| debian@BeaglePlay:~$ efvtest | |
| No device specified, trying to scan all of /dev/input/event* | |
| Not running as root, no devices may be available. | |
| Available devices: | |
| /dev/input/event0: Logitech USB Receiver | |
| /dev/input/event1: gpio-keys | |
| /dev/input/event2: Logitech USB Receiver Mouse | |
| /dev/input/event3: Logitech USB Receiver Consumer Control | |
| /dev/input/event4: Logitech USB Receiver System Control | |
| /dev/input/event5: tps65219-pwrbutton | |
| Select the device event number [0-5]: ^C | |
| debian@BeaglePlay:~$ dmesg | |
| [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034] | |
| [ 0.000000] Linux version 6.3.0-rc1-next-20230310-00008-g754234fd013f (nmenon@ud) (Ubuntu clang version 17.0.0 (++20230306042327+fb661e255439-1~exp1~20230306042455.786), Ubuntu LLD 17.0.0) #kernel_patch_verify_build SMP PREEMPT Fri Mar 10 03:07:57 CST 2 | |
| [ 0.000000] Machine model: BeagleBoard.org BeaglePlay | |
| [ 0.000000] efi: UEFI not found. | |
| [ 0.000000] OF: reserved mem: 0x000000009ca00000..0x000000009cafffff (1024 KiB) map non-reusable ramoops@9ca00000 | |
| [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009db00000, size 12 MiB | |
| [ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@9db00000, compatible id shared-dma-pool | |
| [ 0.000000] OF: reserved mem: 0x000000009db00000..0x000000009e6fffff (12288 KiB) nomap non-reusable r5f-dma-memory@9db00000 | |
| [ 0.000000] OF: reserved mem: 0x000000009e780000..0x000000009e7fffff (512 KiB) nomap non-reusable tfa@9e780000 | |
| [ 0.000000] OF: reserved mem: 0x000000009e800000..0x000000009fffffff (24576 KiB) nomap non-reusable optee@9e800000 | |
| [ 0.000000] NUMA: No NUMA configuration found | |
| [ 0.000000] NUMA: Faking a node at [mem 0x0000000080000000-0x00000000ffffffff] | |
| [ 0.000000] NUMA: NODE_DATA [mem 0xffbe09c0-0xffbe2fff] | |
| [ 0.000000] Zone ranges: | |
| [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] | |
| [ 0.000000] DMA32 empty | |
| [ 0.000000] Normal empty | |
| [ 0.000000] Movable zone start for each node | |
| [ 0.000000] Early memory node ranges | |
| [ 0.000000] node 0: [mem 0x0000000080000000-0x000000009dafffff] | |
| [ 0.000000] node 0: [mem 0x000000009db00000-0x000000009e6fffff] | |
| [ 0.000000] node 0: [mem 0x000000009e700000-0x000000009e77ffff] | |
| [ 0.000000] node 0: [mem 0x000000009e780000-0x000000009fffffff] | |
| [ 0.000000] node 0: [mem 0x00000000a0000000-0x00000000ffffffff] | |
| [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x00000000ffffffff] | |
| [ 0.000000] cma: Reserved 32 MiB at 0x00000000fba00000 | |
| [ 0.000000] psci: probing for conduit method from DT. | |
| [ 0.000000] psci: PSCIv1.1 detected in firmware. | |
| [ 0.000000] psci: Using standard PSCI v0.2 function IDs | |
| [ 0.000000] psci: Trusted OS migration not required | |
| [ 0.000000] psci: SMC Calling Convention v1.2 | |
| [ 0.000000] percpu: Embedded 22 pages/cpu s49384 r8192 d32536 u90112 | |
| [ 0.000000] pcpu-alloc: s49384 r8192 d32536 u90112 alloc=22*4096 | |
| [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 | |
| [ 0.000000] Detected VIPT I-cache on CPU0 | |
| [ 0.000000] CPU features: detected: GIC system register CPU interface | |
| [ 0.000000] CPU features: detected: ARM erratum 845719 | |
| [ 0.000000] alternatives: applying boot alternatives | |
| [ 0.000000] Fallback order for Node 0: 0 | |
| [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 516096 | |
| [ 0.000000] Policy zone: DMA | |
| [ 0.000000] Kernel command line: root=/dev/mmcblk1p2 ro rootfstype=ext4 rootwait net.ifnames=0 quiet | |
| [ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) | |
| [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) | |
| [ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off | |
| [ 0.000000] Memory: 1948660K/2097152K available (13952K kernel code, 1366K rwdata, 4692K rodata, 1024K init, 538K bss, 115724K reserved, 32768K cma-reserved) | |
| [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 | |
| [ 0.000000] rcu: Preemptible hierarchical RCU implementation. | |
| [ 0.000000] rcu: RCU event tracing is enabled. | |
| [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4. | |
| [ 0.000000] Trampoline variant of Tasks RCU enabled. | |
| [ 0.000000] Tracing variant of Tasks RCU enabled. | |
| [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. | |
| [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 | |
| [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 | |
| [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode | |
| [ 0.000000] GICv3: 256 SPIs implemented | |
| [ 0.000000] GICv3: 0 Extended SPIs implemented | |
| [ 0.000000] Root IRQ handler: gic_handle_irq | |
| [ 0.000000] GICv3: GICv3 features: 16 PPIs | |
| [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000001880000 | |
| [ 0.000000] ITS [mem 0x01820000-0x0182ffff] | |
| [ 0.000000] GIC: enabling workaround for ITS: Socionext Synquacer pre-ITS | |
| [ 0.000000] ITS@0x0000000001820000: Devices Table too large, reduce ids 20->19 | |
| [ 0.000000] ITS@0x0000000001820000: allocated 524288 Devices @80800000 (flat, esz 8, psz 64K, shr 0) | |
| [ 0.000000] ITS: using cache flushing for cmd queue | |
| [ 0.000000] GICv3: using LPI property table @0x0000000080040000 | |
| [ 0.000000] GIC: using cache flushing for LPI property table | |
| [ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x0000000080050000 | |
| [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. | |
| [ 0.000000] arch_timer: cp15 timer(s) running at 200.00MHz (phys). | |
| [ 0.000000] clocksource: arch_sys_counter: mask: 0x3ffffffffffffff max_cycles: 0x2e2049d3e8, max_idle_ns: 440795210634 ns | |
| [ 0.000001] sched_clock: 58 bits at 200MHz, resolution 5ns, wraps every 4398046511102ns | |
| [ 0.000291] Console: colour dummy device 80x25 | |
| [ 0.000303] printk: console [tty0] enabled | |
| [ 0.000432] Calibrating delay loop (skipped), value calculated using timer frequency.. 400.00 BogoMIPS (lpj=800000) | |
| [ 0.000447] pid_max: default: 32768 minimum: 301 | |
| [ 0.000510] LSM: initializing lsm=capability,integrity | |
| [ 0.000633] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) | |
| [ 0.000658] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) | |
| [ 0.002593] cblist_init_generic: Setting adjustable number of callback queues. | |
| [ 0.002620] cblist_init_generic: Setting shift to 2 and lim to 1. | |
| [ 0.002694] cblist_init_generic: Setting shift to 2 and lim to 1. | |
| [ 0.002881] rcu: Hierarchical SRCU implementation. | |
| [ 0.002886] rcu: Max phase no-delay instances is 1000. | |
| [ 0.003132] Platform MSI: msi-controller@1820000 domain created | |
| [ 0.003297] PCI/MSI: /bus@f0000/interrupt-controller@1800000/msi-controller@1820000 domain created | |
| [ 0.003766] EFI services will not be available. | |
| [ 0.004129] smp: Bringing up secondary CPUs ... | |
| [ 0.012809] Detected VIPT I-cache on CPU1 | |
| [ 0.012892] GICv3: CPU1: found redistributor 1 region 0:0x00000000018a0000 | |
| [ 0.012912] GICv3: CPU1: using allocated LPI pending table @0x0000000080060000 | |
| [ 0.012967] CPU1: Booted secondary processor 0x0000000001 [0x410fd034] | |
| [ 0.021700] Detected VIPT I-cache on CPU2 | |
| [ 0.021762] GICv3: CPU2: found redistributor 2 region 0:0x00000000018c0000 | |
| [ 0.021778] GICv3: CPU2: using allocated LPI pending table @0x0000000080070000 | |
| [ 0.021813] CPU2: Booted secondary processor 0x0000000002 [0x410fd034] | |
| [ 0.030450] Detected VIPT I-cache on CPU3 | |
| [ 0.030507] GICv3: CPU3: found redistributor 3 region 0:0x00000000018e0000 | |
| [ 0.030522] GICv3: CPU3: using allocated LPI pending table @0x0000000080080000 | |
| [ 0.030554] CPU3: Booted secondary processor 0x0000000003 [0x410fd034] | |
| [ 0.030617] smp: Brought up 1 node, 4 CPUs | |
| [ 0.030636] SMP: Total of 4 processors activated. | |
| [ 0.030641] CPU features: detected: 32-bit EL0 Support | |
| [ 0.030645] CPU features: detected: 32-bit EL1 Support | |
| [ 0.030651] CPU features: detected: CRC32 instructions | |
| [ 0.030723] CPU: All CPU(s) started at EL2 | |
| [ 0.030752] alternatives: applying system-wide alternatives | |
| [ 0.033212] devtmpfs: initialized | |
| [ 0.039877] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns | |
| [ 0.039919] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) | |
| [ 0.041173] pinctrl core: initialized pinctrl subsystem | |
| [ 0.041825] DMI not present or invalid. | |
| [ 0.042452] NET: Registered PF_NETLINK/PF_ROUTE protocol family | |
| [ 0.043510] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations | |
| [ 0.043679] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations | |
| [ 0.043843] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations | |
| [ 0.043922] audit: initializing netlink subsys (disabled) | |
| [ 0.044238] audit: type=2000 audit(0.044:1): state=initialized audit_enabled=0 res=1 | |
| [ 0.044761] thermal_sys: Registered thermal governor 'step_wise' | |
| [ 0.044768] thermal_sys: Registered thermal governor 'power_allocator' | |
| [ 0.044814] cpuidle: using governor menu | |
| [ 0.045029] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. | |
| [ 0.045131] ASID allocator initialised with 65536 entries | |
| [ 0.045745] Serial: AMBA PL011 UART driver | |
| [ 0.057249] KASLR disabled due to lack of seed | |
| [ 0.058117] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages | |
| [ 0.058135] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page | |
| [ 0.058143] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages | |
| [ 0.058147] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page | |
| [ 0.058153] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages | |
| [ 0.058157] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page | |
| [ 0.058163] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages | |
| [ 0.058167] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page | |
| [ 0.059952] ACPI: Interpreter disabled. | |
| [ 0.060406] k3-chipinfo 43000014.chipid: Family:AM62X rev:SR1.0 JTAGID[0x0bb7e02f] Detected | |
| [ 0.061557] iommu: Default domain type: Translated | |
| [ 0.061573] iommu: DMA domain TLB invalidation policy: strict mode | |
| [ 0.061901] SCSI subsystem initialized | |
| [ 0.062067] libata version 3.00 loaded. | |
| [ 0.062264] usbcore: registered new interface driver usbfs | |
| [ 0.062298] usbcore: registered new interface driver hub | |
| [ 0.062332] usbcore: registered new device driver usb | |
| [ 0.062900] pps_core: LinuxPPS API ver. 1 registered | |
| [ 0.062906] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> | |
| [ 0.062924] PTP clock support registered | |
| [ 0.063083] EDAC MC: Ver: 3.0.0 | |
| [ 0.063612] scmi_core: SCMI protocol bus registered | |
| [ 0.063929] FPGA manager framework | |
| [ 0.064033] Advanced Linux Sound Architecture Driver Initialized. | |
| [ 0.064864] vgaarb: loaded | |
| [ 0.065325] clocksource: Switched to clocksource arch_sys_counter | |
| [ 0.065616] VFS: Disk quotas dquot_6.6.0 | |
| [ 0.065655] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) | |
| [ 0.065865] pnp: PnP ACPI: disabled | |
| [ 0.071708] NET: Registered PF_INET protocol family | |
| [ 0.071995] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear) | |
| [ 0.073509] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear) | |
| [ 0.073556] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) | |
| [ 0.073605] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear) | |
| [ 0.073731] TCP bind hash table entries: 16384 (order: 7, 524288 bytes, linear) | |
| [ 0.074258] TCP: Hash tables configured (established 16384 bind 16384) | |
| [ 0.074460] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear) | |
| [ 0.074520] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear) | |
| [ 0.074734] NET: Registered PF_UNIX/PF_LOCAL protocol family | |
| [ 0.075314] RPC: Registered named UNIX socket transport module. | |
| [ 0.075330] RPC: Registered udp transport module. | |
| [ 0.075334] RPC: Registered tcp transport module. | |
| [ 0.075338] RPC: Registered tcp NFSv4.1 backchannel transport module. | |
| [ 0.075357] PCI: CLS 0 bytes, default 64 | |
| [ 0.075579] Unpacking initramfs... | |
| [ 0.082302] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available | |
| [ 0.083012] kvm [1]: IPA Size Limit: 40 bits | |
| [ 0.084096] kvm [1]: vgic-v2@100010000 | |
| [ 0.084125] kvm [1]: GIC system register CPU interface enabled | |
| [ 0.084164] kvm [1]: vgic interrupt IRQ9 | |
| [ 0.084193] kvm [1]: Hyp mode initialized successfully | |
| [ 0.085937] Initialise system trusted keyrings | |
| [ 0.086301] workingset: timestamp_bits=42 max_order=19 bucket_order=0 | |
| [ 0.086751] squashfs: version 4.0 (2009/01/31) Phillip Lougher | |
| [ 0.087128] NFS: Registering the id_resolver key type | |
| [ 0.087170] Key type id_resolver registered | |
| [ 0.087175] Key type id_legacy registered | |
| [ 0.087199] nfs4filelayout_init: NFSv4 File Layout Driver Registering... | |
| [ 0.087206] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... | |
| [ 0.087445] 9p: Installing v9fs 9p2000 file system support | |
| [ 0.119636] Key type asymmetric registered | |
| [ 0.119675] Asymmetric key parser 'x509' registered | |
| [ 0.119834] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) | |
| [ 0.119845] io scheduler mq-deadline registered | |
| [ 0.119852] io scheduler kyber registered | |
| [ 0.119924] io scheduler bfq registered | |
| [ 0.122969] pinctrl-single 4084000.pinctrl: 34 pins, size 136 | |
| [ 0.123796] pinctrl-single f4000.pinctrl: 171 pins, size 684 | |
| [ 0.126870] EINJ: ACPI disabled. | |
| [ 0.133384] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled | |
| [ 0.143659] loop: module loaded | |
| [ 0.144611] megasas: 07.725.01.00-rc1 | |
| [ 0.149267] tun: Universal TUN/TAP device driver, 1.6 | |
| [ 0.150216] thunder_xcv, ver 1.0 | |
| [ 0.150259] thunder_bgx, ver 1.0 | |
| [ 0.150289] nicpf, ver 1.0 | |
| [ 0.150701] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version | |
| [ 0.150708] hns3: Copyright (c) 2017 Huawei Corporation. | |
| [ 0.150761] hclge is initializing | |
| [ 0.150792] e1000: Intel(R) PRO/1000 Network Driver | |
| [ 0.150796] e1000: Copyright (c) 1999-2006 Intel Corporation. | |
| [ 0.150829] e1000e: Intel(R) PRO/1000 Network Driver | |
| [ 0.150833] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. | |
| [ 0.150858] igb: Intel(R) Gigabit Ethernet Network Driver | |
| [ 0.150863] igb: Copyright (c) 2007-2014 Intel Corporation. | |
| [ 0.150886] igbvf: Intel(R) Gigabit Virtual Function Network Driver | |
| [ 0.150890] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. | |
| [ 0.151017] sky2: driver version 1.30 | |
| [ 0.151972] VFIO - User Level meta-driver version: 0.3 | |
| [ 0.153963] usbcore: registered new interface driver usb-storage | |
| [ 0.155731] i2c_dev: i2c /dev entries driver | |
| [ 0.156679] ghes_edac: GHES probing device list is empty | |
| [ 0.158586] sdhci: Secure Digital Host Controller Interface driver | |
| [ 0.158611] sdhci: Copyright(c) Pierre Ossman | |
| [ 0.159219] Synopsys Designware Multimedia Card Interface Driver | |
| [ 0.159723] sdhci-pltfm: SDHCI platform and OF driver helper | |
| [ 0.160853] ledtrig-cpu: registered to indicate activity on CPUs | |
| [ 0.161891] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping .... | |
| [ 0.162643] usbcore: registered new interface driver usbhid | |
| [ 0.162657] usbhid: USB HID core driver | |
| [ 0.164564] optee: probing for conduit method. | |
| [ 0.164614] optee: revision 3.18 (4adb4a1f) | |
| [ 0.165031] optee: dynamic shared memory is enabled | |
| [ 0.165299] optee: initialized driver | |
| [ 0.167362] NET: Registered PF_PACKET protocol family | |
| [ 0.167497] 9pnet: Installing 9P2000 support | |
| [ 0.167585] Key type dns_resolver registered | |
| [ 0.176399] registered taskstats version 1 | |
| [ 0.176615] Loading compiled-in X.509 certificates | |
| [ 0.189759] ti-sci 44043000.system-controller: ABI: 3.1 (firmware rev 0x0008 '8.6.4--v08.06.04 (Chill Capybar') | |
| [ 0.243781] omap_i2c 4900000.i2c: bus 5 rev0.12 at 100 kHz | |
| [ 0.245517] i2c 0-0030: Fixed dependency cycle(s) with /bus@f0000/i2c@20000000/pmic@30/regulators/buck2 | |
| [ 0.245742] omap_i2c 20000000.i2c: bus 0 rev0.12 at 400 kHz | |
| [ 0.247392] omap_i2c 20010000.i2c: bus 1 rev0.12 at 100 kHz | |
| [ 0.248493] omap_i2c 20020000.i2c: bus 2 rev0.12 at 100 kHz | |
| [ 0.249619] omap_i2c 20030000.i2c: bus 3 rev0.12 at 400 kHz | |
| [ 0.249958] ti-sci-intr 4210000.interrupt-controller: Interrupt Router 5 domain created | |
| [ 0.250151] ti-sci-intr bus@f0000:interrupt-controller@a00000: Interrupt Router 3 domain created | |
| [ 0.250439] ti-sci-inta 48000000.interrupt-controller: Interrupt Aggregator domain 28 created | |
| [ 0.250803] ti-udma 485c0100.dma-controller: Number of rings: 82 | |
| [ 0.252871] ti-udma 485c0100.dma-controller: Channels: 48 (bchan: 18, tchan: 12, rchan: 18) | |
| [ 0.255696] ti-udma 485c0000.dma-controller: Number of rings: 150 | |
| [ 0.259702] ti-udma 485c0000.dma-controller: Channels: 35 (tchan: 20, rchan: 15) | |
| [ 0.262832] 4a00000.serial: ttyS1 at MMIO 0x4a00000 (irq = 239, base_baud = 3000000) is a 8250 | |
| [ 0.264355] 2b300000.serial: ttyS0 at MMIO 0x2b300000 (irq = 240, base_baud = 3000000) is a 8250 | |
| [ 0.265852] 2800000.serial: ttyS2 at MMIO 0x2800000 (irq = 241, base_baud = 3000000) is a 8250 | |
| [ 0.265953] printk: console [ttyS2] enabled | |
| [ 0.267632] 2850000.serial: ttyS3 at MMIO 0x2850000 (irq = 242, base_baud = 3000000) is a 8250 | |
| [ 0.269100] am65-cpsw-nuss 8000000.ethernet: initializing am65 cpsw nuss version 0x6BA01103, cpsw version 0x6BA81103 Ports: 3 quirks:00000002 | |
| [ 0.269553] am65-cpsw-nuss 8000000.ethernet: Use random MAC address | |
| [ 0.275908] am65-cpsw-nuss 8000000.ethernet: initialized cpsw ale version 1.5 | |
| [ 0.275924] am65-cpsw-nuss 8000000.ethernet: ALE Table size 512 | |
| [ 0.278124] am65-cpsw-nuss 8000000.ethernet: set new flow-id-base 19 | |
| [ 0.286701] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller | |
| [ 0.286744] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 | |
| [ 0.286982] xhci-hcd xhci-hcd.0.auto: USB3 root hub has no ports | |
| [ 0.286994] xhci-hcd xhci-hcd.0.auto: hcc params 0x0258fe6d hci version 0x110 quirks 0x0000000000010010 | |
| [ 0.287074] xhci-hcd xhci-hcd.0.auto: irq 245, io mem 0x31100000 | |
| [ 0.288055] hub 1-0:1.0: USB hub found | |
| [ 0.288105] hub 1-0:1.0: 1 port detected | |
| [ 0.293364] mmc0: CQHCI version 5.10 | |
| [ 0.341932] mmc0: SDHCI controller on fa10000.mmc [fa10000.mmc] using ADMA 64-bit | |
| [ 0.392249] mmc0: Command Queue Engine enabled | |
| [ 0.392292] mmc0: new HS200 MMC card at address 0001 | |
| [ 0.393185] mmcblk0: mmc0:0001 TB2916 14.6 GiB | |
| [ 0.395150] mmcblk0: p1 p2 | |
| [ 0.395872] mmcblk0boot0: mmc0:0001 TB2916 4.00 MiB | |
| [ 0.397040] mmcblk0boot1: mmc0:0001 TB2916 4.00 MiB | |
| [ 0.398152] mmcblk0rpmb: mmc0:0001 TB2916 4.00 MiB, chardev (241:0) | |
| [ 0.545403] usb 1-1: new full-speed USB device number 2 using xhci-hcd | |
| [ 0.581453] Freeing initrd memory: 15044K | |
| [ 0.716026] input: Logitech USB Receiver as /devices/platform/bus@f0000/f910000.dwc3-usb/31100000.usb/xhci-hcd.0.auto/usb1/1-1/1-1:1.0/0003:046D:C548.0001/input/input0 | |
| [ 0.736308] sdhci-am654 fa00000.mmc: Got CD GPIO | |
| [ 0.736937] mmc1: CQHCI version 5.10 | |
| [ 0.739391] mmc2: CQHCI version 5.10 | |
| [ 0.741750] input: gpio-keys as /devices/platform/gpio-keys/input/input1 | |
| [ 0.774146] hid-generic 0003:046D:C548.0001: input: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-xhci-hcd.0.auto-1/input0 | |
| [ 0.778838] input: Logitech USB Receiver Mouse as /devices/platform/bus@f0000/f910000.dwc3-usb/31100000.usb/xhci-hcd.0.auto/usb1/1-1/1-1:1.1/0003:046D:C548.0002/input/input2 | |
| [ 0.779411] input: Logitech USB Receiver Consumer Control as /devices/platform/bus@f0000/f910000.dwc3-usb/31100000.usb/xhci-hcd.0.auto/usb1/1-1/1-1:1.1/0003:046D:C548.0002/input/input3 | |
| [ 0.781093] mmc2: SDHCI controller on fa20000.mmc [fa20000.mmc] using ADMA 64-bit | |
| [ 0.786667] sdhci-am654 fa20000.mmc: card claims to support voltages below defined range | |
| [ 0.786989] ALSA device list: | |
| [ 0.787005] No soundcards found. | |
| [ 0.789485] mmc1: SDHCI controller on fa00000.mmc [fa00000.mmc] using ADMA 64-bit | |
| [ 0.790354] Freeing unused kernel memory: 1024K | |
| [ 0.790437] Run /init as init process | |
| [ 0.790442] with arguments: | |
| [ 0.790446] /init | |
| [ 0.790451] with environment: | |
| [ 0.790455] HOME=/ | |
| [ 0.790460] TERM=linux | |
| [ 0.799661] mmc2: new high speed SDIO card at address 0001 | |
| [ 0.837951] input: Logitech USB Receiver System Control as /devices/platform/bus@f0000/f910000.dwc3-usb/31100000.usb/xhci-hcd.0.auto/usb1/1-1/1-1:1.1/0003:046D:C548.0002/input/input4 | |
| [ 0.838258] hid-generic 0003:046D:C548.0002: input: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-xhci-hcd.0.auto-1/input1 | |
| [ 0.840992] hid-generic 0003:046D:C548.0003: device has no listeners, quitting | |
| [ 0.843670] mmc1: new ultra high speed SDR104 SDXC card at address 0001 | |
| [ 0.849351] mmcblk1: mmc1:0001 JC2RT 59.6 GiB | |
| [ 0.851614] mmcblk1: p1 p2 | |
| [ 2.201920] EXT4-fs (mmcblk1p2): mounted filesystem f36acace-90e2-4832-93b0-c01c822c6e0a with ordered data mode. Quota mode: none. | |
| [ 2.685883] systemd[1]: System time before build time, advancing clock. | |
| [ 2.859314] NET: Registered PF_INET6 protocol family | |
| [ 2.861224] Segment Routing with IPv6 | |
| [ 2.861299] In-situ OAM (IOAM) with IPv6 | |
| [ 2.931453] systemd[1]: systemd 247.3-7+deb11u1 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified) | |
| [ 2.932726] systemd[1]: Detected architecture arm64. | |
| [ 2.934871] systemd[1]: Set hostname to <BeaglePlay>. | |
| [ 3.455137] systemd[1]: /lib/systemd/system/plymouth-start.service:16: Unit configured to use KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update your service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed. | |
| [ 3.571355] systemd[1]: Queued start job for default target Graphical Interface. | |
| [ 4.625331] random: crng init done | |
| [ 4.722568] systemd[1]: Created slice system-getty.slice. | |
| [ 4.724774] systemd[1]: Created slice system-modprobe.slice. | |
| [ 4.726611] systemd[1]: Created slice system-serial\x2dgetty.slice. | |
| [ 4.728023] systemd[1]: Created slice User and Session Slice. | |
| [ 4.728438] systemd[1]: Started Forward Password Requests to Wall Directory Watch. | |
| [ 4.728647] systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped. | |
| [ 4.729025] systemd[1]: Reached target Remote File Systems. | |
| [ 4.729095] systemd[1]: Reached target Slices. | |
| [ 4.729172] systemd[1]: Reached target Swap. | |
| [ 4.738847] systemd[1]: Listening on Syslog Socket. | |
| [ 4.739632] systemd[1]: Listening on fsck to fsckd communication Socket. | |
| [ 4.740023] systemd[1]: Listening on initctl Compatibility Named Pipe. | |
| [ 4.741046] systemd[1]: Listening on Journal Audit Socket. | |
| [ 4.742775] systemd[1]: Listening on Journal Socket (/dev/log). | |
| [ 4.749031] systemd[1]: Listening on Journal Socket. | |
| [ 4.749925] systemd[1]: Listening on Network Service Netlink Socket. | |
| [ 4.750476] systemd[1]: Listening on udev Control Socket. | |
| [ 4.750820] systemd[1]: Listening on udev Kernel Socket. | |
| [ 4.789826] systemd[1]: Mounting Huge Pages File System... | |
| [ 4.795988] systemd[1]: Mounting POSIX Message Queue File System... | |
| [ 4.802498] systemd[1]: Mounting /sys/kernel/debug... | |
| [ 4.803450] systemd[1]: Condition check resulted in Kernel Trace File System being skipped. | |
| [ 4.810705] systemd[1]: Starting Set the console keyboard layout... | |
| [ 4.817438] systemd[1]: Starting Create list of static device nodes for the current kernel... | |
| [ 4.823769] systemd[1]: Starting Load Kernel Module configfs... | |
| [ 4.833558] systemd[1]: Starting Load Kernel Module drm... | |
| [ 4.844956] systemd[1]: Starting Load Kernel Module fuse... | |
| [ 4.850645] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. | |
| [ 4.857768] systemd[1]: Starting File System Check on Root Device... | |
| [ 4.867960] systemd[1]: Starting Journal Service... | |
| [ 4.903560] systemd[1]: Starting Load Kernel Modules... | |
| [ 4.911019] systemd[1]: Starting Coldplug All udev Devices... | |
| [ 4.923021] systemd[1]: Mounted Huge Pages File System. | |
| [ 4.925262] systemd[1]: Mounted POSIX Message Queue File System. | |
| [ 4.927773] systemd[1]: Mounted /sys/kernel/debug. | |
| [ 4.931278] systemd[1]: Finished Set the console keyboard layout. | |
| [ 4.936103] systemd[1]: Finished Create list of static device nodes for the current kernel. | |
| [ 4.939474] systemd[1]: modprobe@configfs.service: Succeeded. | |
| [ 4.941085] systemd[1]: Finished Load Kernel Module configfs. | |
| [ 4.973899] fuse: init (API version 7.38) | |
| [ 5.013937] systemd[1]: Mounting Kernel Configuration File System... | |
| [ 5.023229] systemd[1]: Started File System Check Daemon to report status. | |
| [ 5.027528] systemd[1]: modprobe@drm.service: Succeeded. | |
| [ 5.029964] systemd[1]: Finished Load Kernel Module drm. | |
| [ 5.036055] systemd[1]: modprobe@fuse.service: Succeeded. | |
| [ 5.037633] systemd[1]: Finished Load Kernel Module fuse. | |
| [ 5.040493] systemd[1]: Finished File System Check on Root Device. | |
| [ 5.043954] systemd[1]: Finished Load Kernel Modules. | |
| [ 5.046593] systemd[1]: Mounted Kernel Configuration File System. | |
| [ 5.053495] systemd[1]: Mounting FUSE Control File System... | |
| [ 5.067399] systemd[1]: Starting Remount Root and Kernel File Systems... | |
| [ 5.073822] systemd[1]: Starting Apply Kernel Variables... | |
| [ 5.079330] systemd[1]: Mounted FUSE Control File System. | |
| [ 5.085883] systemd[1]: Started Journal Service. | |
| [ 5.136888] EXT4-fs (mmcblk1p2): re-mounted f36acace-90e2-4832-93b0-c01c822c6e0a. Quota mode: none. | |
| [ 5.259049] systemd-journald[258]: Received client request to flush runtime journal. | |
| [ 5.266728] systemd-journald[258]: File /var/log/journal/1e24495650214bd8837a3cbf32addb7a/system.journal corrupted or uncleanly shut down, renaming and replacing. | |
| [ 6.340424] am65-cpsw-nuss 8000000.ethernet eth0: PHY [gpio-0:00] driver [RTL8211F-VD Gigabit Ethernet] (irq=POLL) | |
| [ 6.340468] am65-cpsw-nuss 8000000.ethernet eth0: configuring for phy/rgmii-rxid link mode | |
| [ 6.598978] bq32k 0-0068: registered as rtc0 | |
| [ 6.599420] bq32k 0-0068: setting system clock to 2023-03-10T09:28:43 UTC (1678440523) | |
| [ 6.654044] at24 0-0050: supply vcc not found, using dummy regulator | |
| [ 6.658771] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write | |
| [ 7.078687] rtc-ti-k3 2b1f0000.rtc: registered as rtc1 | |
| [ 8.131035] VDD_CORE: Bringing 750000uV into 850000-850000uV | |
| [ 8.148120] input: tps65219-pwrbutton as /devices/platform/bus@f0000/20000000.i2c/i2c-0/0-0030/tps65219-pwrbutton.3.auto/input/input5 | |
| [ 8.236066] cfg80211: Loading compiled-in X.509 certificates for regulatory database | |
| [ 8.264193] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' | |
| [ 8.296672] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid | |
| [ 8.951821] Adding 2097148k swap on /var/swap. Priority:-2 extents:16 across:47161340k SS | |
| [ 8.964111] Mass Storage Function, version: 2009/09/11 | |
| [ 8.964149] LUN: removable file: (no medium) | |
| [ 9.305962] wlcore: wl18xx HW: 183x or 180x, PG 2.2 (ROM 0x11) | |
| [ 9.308101] wlcore: WARNING Detected unconfigured mac address in nvs, derive from fuse instead. | |
| [ 9.308131] wlcore: WARNING This default nvs file can be removed from the file system | |
| [ 9.311385] wlcore: loaded | |
| [ 9.847987] wlcore: using inverted interrupt logic: 2 | |
| [ 9.901611] wlcore: PHY firmware version: Rev 8.2.0.0.243 | |
| [ 10.016081] wlcore: firmware booted (Rev 8.9.0.0.83) | |
| [ 10.274033] wlcore: down | |
| [ 10.316250] IPv6: ADDRCONF(NETDEV_CHANGE): SoftAp0: link becomes ready | |
| [ 10.462397] am65-cpsw-nuss 8000000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx | |
| [ 10.462622] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready | |
| [ 13.030119] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. | |
| [ 13.047459] Bridge firewalling registered | |
| [ 13.996511] configfs-gadget.g_multi gadget.0: HOST MAC 1c:ba:8c:a2:ed:6a | |
| [ 13.996550] configfs-gadget.g_multi gadget.0: MAC 1c:ba:8c:a2:ed:6b | |
| [ 14.005383] configfs-gadget.g_multi gadget.0: HOST MAC 1c:ba:8c:a2:ed:6c | |
| [ 14.005423] configfs-gadget.g_multi gadget.0: MAC 1c:ba:8c:a2:ed:6d | |
| [ 20.256068] memfd_create() without MFD_EXEC nor MFD_NOEXEC_SEAL, pid=850 'systemd' | |
| debian@BeaglePlay:~$ ifconfig -a | |
| SoftAp0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 | |
| inet 192.168.8.1 netmask 255.255.255.0 broadcast 192.168.8.255 | |
| inet6 fe80::6e30:2aff:fe2e:2eb8 prefixlen 64 scopeid 0x20<link> | |
| ether 6c:30:2a:2e:2e:b8 txqueuelen 1000 (Ethernet) | |
| RX packets 0 bytes 0 (0.0 B) | |
| RX errors 0 dropped 0 overruns 0 frame 0 | |
| TX packets 44 bytes 8423 (8.2 KiB) | |
| TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 | |
| eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 | |
| inet 192.168.1.153 netmask 255.255.255.0 broadcast 192.168.1.255 | |
| inet6 fe80::3608:e1ff:fe84:e8ae prefixlen 64 scopeid 0x20<link> | |
| ether 34:08:e1:84:e8:ae txqueuelen 1000 (Ethernet) | |
| RX packets 351 bytes 33920 (33.1 KiB) | |
| RX errors 0 dropped 1 overruns 0 frame 0 | |
| TX packets 58 bytes 9631 (9.4 KiB) | |
| TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 | |
| eth1: flags=4098<BROADCAST,MULTICAST> mtu 1500 | |
| ether 6e:98:ca:f6:c3:3b txqueuelen 1000 (Ethernet) | |
| RX packets 0 bytes 0 (0.0 B) | |
| RX errors 0 dropped 0 overruns 0 frame 0 | |
| TX packets 0 bytes 0 (0.0 B) | |
| TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 | |
| lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536 | |
| inet 127.0.0.1 netmask 255.0.0.0 | |
| inet6 ::1 prefixlen 128 scopeid 0x10<host> | |
| loop txqueuelen 1000 (Local Loopback) | |
| RX packets 178 bytes 16097 (15.7 KiB) | |
| RX errors 0 dropped 0 overruns 0 frame 0 | |
| TX packets 178 bytes 16097 (15.7 KiB) | |
| TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 | |
| usb0: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500 | |
| ether 1c:ba:8c:a2:ed:6b txqueuelen 1000 (Ethernet) | |
| RX packets 0 bytes 0 (0.0 B) | |
| RX errors 0 dropped 0 overruns 0 frame 0 | |
| TX packets 0 bytes 0 (0.0 B) | |
| TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 | |
| usb1: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500 | |
| ether 1c:ba:8c:a2:ed:6d txqueuelen 1000 (Ethernet) | |
| RX packets 0 bytes 0 (0.0 B) | |
| RX errors 0 dropped 0 overruns 0 frame 0 | |
| TX packets 0 bytes 0 (0.0 B) | |
| TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 | |
| wlan0: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500 | |
| ether 6c:30:2a:2e:2e:b7 txqueuelen 1000 (Ethernet) | |
| RX packets 0 bytes 0 (0.0 B) | |
| RX errors 0 dropped 0 overruns 0 frame 0 | |
| TX packets 0 bytes 0 (0.0 B) | |
| TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 | |
| debian@BeaglePlay:~$ ping google.com | |
| PING google.com (142.251.46.142) 56(84) bytes of data. | |
| 64 bytes from dfw28s35-in-f14.1e100.net (142.251.46.142): icmp_seq=1 ttl=58 time=3.57 ms | |
| 64 bytes from dfw28s35-in-f14.1e100.net (142.251.46.142): icmp_seq=2 ttl=58 time=4.11 ms | |
| 64 bytes from dfw28s35-in-f14.1e100.net (142.251.46.142): icmp_seq=3 ttl=58 time=4.12 ms | |
| ^C | |
| --- google.com ping statistics --- | |
| 3 packets transmitted, 3 received, 0% packet loss, time 2004ms | |
| rtt min/avg/max/mdev = 3.571/3.934/4.121/0.256 ms | |
| debian@BeaglePlay:~$ | |
| Skipping tty reset... | |
| Thanks for using picocom | |
| picocom v2.2 | |
| port is : /dev/ttyUSB0 | |
| flowcontrol : none | |
| baudrate is : 115200 | |
| parity is : none | |
| databits are : 8 | |
| stopbits are : 1 | |
| escape is : C-a | |
| local echo is : no | |
| noinit is : yes | |
| noreset is : yes | |
| nolock is : yes | |
| send_cmd is : sz -vv | |
| receive_cmd is : rz -vv -E | |
| imap is : lfcrlf, | |
| omap is : | |
| emap is : crcrlf,delbs, |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment