Skip to content

Instantly share code, notes, and snippets.

Embed
What would you like to do?
[ 0.000000] Linux version 4.20.8-arch1-1-ARCH (builduser@heftig-16404) (gcc version 8.2.1 20181127 (GCC)) #1 SMP PREEMPT Wed Feb 13 00:06:58 UTC 2019
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=e1f39821-3d89-4694-a3a5-53aa73b0fc4f rw quiet
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Hygon HygonGenuine
[ 0.000000] Centaur CentaurHauls
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'compacted' format.
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d3ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d400-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000009cfffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000009d00000-0x0000000009ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000000a000000-0x00000000da7e9fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000da7ea000-0x00000000da971fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000da972000-0x00000000da990fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000da991000-0x00000000daa98fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000daa99000-0x00000000dae53fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000dae54000-0x00000000dbe73fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000dbe74000-0x00000000ddffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000de000000-0x00000000dfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fdf00000-0x00000000fdffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fea00000-0x00000000fea0ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feb80000-0x00000000fec01fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec30000-0x00000000fec30fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fedc2000-0x00000000fedcffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fedd4000-0x00000000fedd5fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000feefffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000081f37ffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 3.0.0 present.
[ 0.000000] DMI: System manufacturer System Product Name/PRIME A320M-A, BIOS 0902 09/08/2017
[ 0.000000] tsc: Fast TSC calibration failed
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] last_pfn = 0x81f380 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF write-through
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
[ 0.000000] 2 base 0000C0000000 mask FFFFE0000000 write-back
[ 0.000000] 3 base 0000DE000000 mask FFFFFE000000 uncachable
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 0000000820000000 aka 33280M
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000000] total RAM covered: 3552M
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] gran_size: 64K chunk_size: 1G num_reg: 3 lose cover RAM: 0G
[ 0.000000] e820: update [mem 0xde000000-0xffffffff] usable ==> reserved
[ 0.000000] last_pfn = 0xde000 max_arch_pfn = 0x400000000
[ 0.000000] check: Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [(____ptrval____)] 97000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] BRK [0x644801000, 0x644801fff] PGTABLE
[ 0.000000] BRK [0x644802000, 0x644802fff] PGTABLE
[ 0.000000] BRK [0x644803000, 0x644803fff] PGTABLE
[ 0.000000] BRK [0x644804000, 0x644804fff] PGTABLE
[ 0.000000] BRK [0x644805000, 0x644805fff] PGTABLE
[ 0.000000] BRK [0x644806000, 0x644806fff] PGTABLE
[ 0.000000] BRK [0x644807000, 0x644807fff] PGTABLE
[ 0.000000] BRK [0x644808000, 0x644808fff] PGTABLE
[ 0.000000] BRK [0x644809000, 0x644809fff] PGTABLE
[ 0.000000] BRK [0x64480a000, 0x64480afff] PGTABLE
[ 0.000000] BRK [0x64480b000, 0x64480bfff] PGTABLE
[ 0.000000] BRK [0x64480c000, 0x64480cfff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x36e49000-0x3771bfff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F05B0 000024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 0x00000000DA979098 0000AC (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x00000000DA9811E8 000114 (v06 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20181003/tbfadt-624)
[ 0.000000] ACPI: DSDT 0x00000000DA9791D0 008017 (v02 ALASKA A M I 01072009 INTL 20120913)
[ 0.000000] ACPI: FACS 0x00000000DAE51C80 000040
[ 0.000000] ACPI: APIC 0x00000000DA981300 0000DE (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x00000000DA9813E0 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: MSDM 0x00000000DA981428 000055 (v01 ALASKA A M I 01072009 00000000)
[ 0.000000] ACPI: SSDT 0x00000000DA981480 008C4C (v02 AMD AMD ALIB 00000002 MSFT 04000000)
[ 0.000000] ACPI: FIDT 0x00000000DA98A0D0 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: SSDT 0x00000000DA98A170 0018B4 (v01 AMD AMD CPU 00000001 AMD 00000001)
[ 0.000000] ACPI: CRAT 0x00000000DA98BA28 000BD0 (v01 AMD AMD CRAT 00000001 AMD 00000001)
[ 0.000000] ACPI: CDIT 0x00000000DA98C5F8 000029 (v01 AMD AMD CDIT 00000001 AMD 00000001)
[ 0.000000] ACPI: SSDT 0x00000000DA98C628 0017FF (v01 AMD AMD AOD 00000001 INTL 20120913)
[ 0.000000] ACPI: MCFG 0x00000000DA98DE28 00003C (v01 ALASKA A M I 01072009 MSFT 00010013)
[ 0.000000] ACPI: HPET 0x00000000DA98DE68 000038 (v01 ALASKA A M I 01072009 AMI 00000005)
[ 0.000000] ACPI: SSDT 0x00000000DA98DEA0 000024 (v01 AMDFCH FCHZP 00001000 INTL 20120913)
[ 0.000000] ACPI: UEFI 0x00000000DA98DEC8 000042 (v01 00000000 00000000)
[ 0.000000] ACPI: IVRS 0x00000000DA98DF10 0000D0 (v02 AMD AMD IVRS 00000001 AMD 00000000)
[ 0.000000] ACPI: SSDT 0x00000000DA98DFE0 0000F8 (v01 AMD AMD PT 00001000 INTL 20120913)
[ 0.000000] ACPI: SSDT 0x00000000DA98E0D8 001664 (v01 AMD CPMCMN 00000001 INTL 20120913)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] system APIC only can use physical flat
[ 0.000000] Setting APIC routing to physical flat.
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000081f37ffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x81f37c000-0x81f37ffff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000081f37ffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009cfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x0000000009cfffff]
[ 0.000000] node 0: [mem 0x000000000a000000-0x00000000da7e9fff]
[ 0.000000] node 0: [mem 0x00000000da991000-0x00000000daa98fff]
[ 0.000000] node 0: [mem 0x00000000dbe74000-0x00000000ddffffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000081f37ffff]
[ 0.000000] Zeroed struct page in unavailable ranges: 14566 pages
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000081f37ffff]
[ 0.000000] On node 0 totalpages: 8370842
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14046 pages used for memmap
[ 0.000000] DMA32 zone: 898942 pages, LIFO batch:63
[ 0.000000] Normal zone: 116686 pages used for memmap
[ 0.000000] Normal zone: 7467904 pages, LIFO batch:63
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] system APIC only can use physical flat
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 13, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] IOAPIC[1]: apic_id 14, version 33, address 0xfec01000, GSI 24-55
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10228201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 16 CPUs, 4 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x09d00000-0x09ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xda7ea000-0xda971fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xda972000-0xda990fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdaa99000-0xdae53fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdae54000-0xdbe73fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xde000000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfdefffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfdf00000-0xfdffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfe000000-0xfe9fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfea00000-0xfea0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfea10000-0xfeb7ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfeb80000-0xfec01fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec02000-0xfec0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec11000-0xfec2ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec30000-0xfec30fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec31000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed3ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed45000-0xfed7ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xfedc1fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfedc2000-0xfedcffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfedd0000-0xfedd3fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfedd4000-0xfedd5fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfedd6000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfeefffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfef00000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] [mem 0xe0000000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[ 0.000000] random: get_random_bytes called from start_kernel+0x95/0x548 with crng_init=0
[ 0.000000] setup_percpu: NR_CPUS:320 nr_cpumask_bits:320 nr_cpu_ids:16 nr_node_ids:1
[ 0.000000] percpu: Embedded 45 pages/cpu @(____ptrval____) s147456 r8192 d28672 u262144
[ 0.000000] pcpu-alloc: s147456 r8192 d28672 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 8240025
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=e1f39821-3d89-4694-a3a5-53aa73b0fc4f rw quiet
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 32851792K/33483368K available (12293K kernel code, 1268K rwdata, 3688K rodata, 1536K init, 3936K bss, 631576K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
[ 0.000000] ftrace: allocating 35811 entries in 140 pages
[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000] rcu: CONFIG_RCU_FANOUT set to non-default value of 32.
[ 0.000000] rcu: RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=16.
[ 0.000000] rcu: RCU priority boosting: priority 1 delay 500 ms.
[ 0.000000] Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=16
[ 0.000000] NR_IRQS: 20736, nr_irqs: 1096, preallocated irqs: 16
[ 0.000000] rcu: Offload RCU callbacks from CPUs: (none).
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] printk: console [tty0] enabled
[ 0.000000] ACPI: Core revision 20181003
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] APIC: Switch to symmetric I/O mode setup
[ 0.003333] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.026666] tsc: PIT calibration matches HPET. 2 loops
[ 0.026666] tsc: Detected 3193.594 MHz processor
[ 0.000006] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2e08a66e9c2, max_idle_ns: 440795315938 ns
[ 0.000011] Calibrating delay loop (skipped), value calculated using timer frequency.. 6389.32 BogoMIPS (lpj=10645313)
[ 0.000013] pid_max: default: 32768 minimum: 301
[ 0.000052] LSM: Security Framework initializing
[ 0.000053] Yama: becoming mindful.
[ 0.000056] AppArmor: AppArmor disabled by boot time parameter
[ 0.004599] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
[ 0.006700] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.006784] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.006853] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.007061] mce: CPU supports 23 MCE banks
[ 0.007079] LVT offset 1 assigned for vector 0xf9
[ 0.007199] LVT offset 2 assigned for vector 0xf4
[ 0.007210] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 512
[ 0.007210] Last level dTLB entries: 4KB 1536, 2MB 1536, 4MB 768, 1GB 0
[ 0.007212] Spectre V2 : Mitigation: Full AMD retpoline
[ 0.007212] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.007213] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[ 0.007382] Freeing SMP alternatives memory: 28K
[ 0.013340] smpboot: CPU0: AMD Ryzen 5 1600 Six-Core Processor (family: 0x17, model: 0x1, stepping: 0x1)
[ 0.030031] Performance Events: Fam17h core perfctr, AMD PMU driver.
[ 0.030037] ... version: 0
[ 0.030037] ... bit width: 48
[ 0.030038] ... generic registers: 6
[ 0.030039] ... value mask: 0000ffffffffffff
[ 0.030039] ... max period: 00007fffffffffff
[ 0.030039] ... fixed-purpose events: 0
[ 0.030040] ... event mask: 000000000000003f
[ 0.036689] rcu: Hierarchical SRCU implementation.
[ 0.060024] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.066690] smp: Bringing up secondary CPUs ...
[ 0.106707] x86: Booting SMP configuration:
[ 0.106709] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 #8 #9 #10 #11
[ 0.508882] smp: Brought up 1 node, 12 CPUs
[ 0.508882] smpboot: Max logical packages: 2
[ 0.508882] smpboot: Total of 12 processors activated (76676.84 BogoMIPS)
[ 0.510618] devtmpfs: initialized
[ 0.510618] x86/mm: Memory block size: 128MB
[ 0.511751] PM: Registering ACPI NVS region [mem 0xdaa99000-0xdae53fff] (3911680 bytes)
[ 0.511751] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[ 0.511751] futex hash table entries: 4096 (order: 6, 262144 bytes)
[ 0.511751] pinctrl core: initialized pinctrl subsystem
[ 0.511751] RTC time: 11:32:43, date: 02/18/19
[ 0.511751] NET: Registered protocol family 16
[ 0.511751] audit: initializing netlink subsys (disabled)
[ 0.511751] audit: type=2000 audit(1550489562.536:1): state=initialized audit_enabled=0 res=1
[ 0.511751] cpuidle: using governor ladder
[ 0.513345] cpuidle: using governor menu
[ 0.513372] ACPI: bus type PCI registered
[ 0.513374] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.513439] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.513442] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.513447] pmd_set_huge: Cannot satisfy [mem 0xf8000000-0xf8200000] with a huge-page mapping due to MTRR override.
[ 0.513509] PCI: Using configuration type 1 for base access
[ 0.514605] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.514605] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.514605] ACPI: Added _OSI(Module Device)
[ 0.514605] ACPI: Added _OSI(Processor Device)
[ 0.514605] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.514605] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.514605] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.514605] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.515215] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.524333] ACPI: 7 ACPI AML tables successfully acquired and loaded
[ 0.529333] ACPI: Interpreter enabled
[ 0.529347] ACPI: (supports S0 S3 S4 S5)
[ 0.529347] ACPI: Using IOAPIC for interrupt routing
[ 0.529483] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.529728] ACPI: Enabled 3 GPEs in block 00 to 1F
[ 0.537901] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.537905] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.538085] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug SHPCHotplug PME LTR]
[ 0.538263] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
[ 0.538274] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.538617] PCI host bridge to bus 0000:00
[ 0.538619] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window]
[ 0.538620] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window]
[ 0.538621] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window]
[ 0.538622] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.538623] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.538624] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[ 0.538625] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xf7ffffff window]
[ 0.538626] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.538631] pci 0000:00:00.0: [1022:1450] type 00 class 0x060000
[ 0.538713] pci 0000:00:00.2: [1022:1451] type 00 class 0x080600
[ 0.538808] pci 0000:00:01.0: [1022:1452] type 00 class 0x060000
[ 0.538878] pci 0000:00:01.3: [1022:1453] type 01 class 0x060400
[ 0.538925] pci 0000:00:01.3: PME# supported from D0 D3hot D3cold
[ 0.539005] pci 0000:00:02.0: [1022:1452] type 00 class 0x060000
[ 0.539086] pci 0000:00:03.0: [1022:1452] type 00 class 0x060000
[ 0.539153] pci 0000:00:03.1: [1022:1453] type 01 class 0x060400
[ 0.539218] pci 0000:00:03.1: PME# supported from D0 D3hot D3cold
[ 0.539312] pci 0000:00:04.0: [1022:1452] type 00 class 0x060000
[ 0.539396] pci 0000:00:07.0: [1022:1452] type 00 class 0x060000
[ 0.539461] pci 0000:00:07.1: [1022:1454] type 01 class 0x060400
[ 0.539480] pci 0000:00:07.1: enabling Extended Tags
[ 0.539501] pci 0000:00:07.1: PME# supported from D0 D3hot D3cold
[ 0.539575] pci 0000:00:08.0: [1022:1452] type 00 class 0x060000
[ 0.539641] pci 0000:00:08.1: [1022:1454] type 01 class 0x060400
[ 0.539660] pci 0000:00:08.1: enabling Extended Tags
[ 0.539683] pci 0000:00:08.1: PME# supported from D0 D3hot D3cold
[ 0.539792] pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500
[ 0.540011] pci 0000:00:14.3: [1022:790e] type 00 class 0x060100
[ 0.540238] pci 0000:00:18.0: [1022:1460] type 00 class 0x060000
[ 0.540300] pci 0000:00:18.1: [1022:1461] type 00 class 0x060000
[ 0.540360] pci 0000:00:18.2: [1022:1462] type 00 class 0x060000
[ 0.540419] pci 0000:00:18.3: [1022:1463] type 00 class 0x060000
[ 0.540480] pci 0000:00:18.4: [1022:1464] type 00 class 0x060000
[ 0.540539] pci 0000:00:18.5: [1022:1465] type 00 class 0x060000
[ 0.540599] pci 0000:00:18.6: [1022:1466] type 00 class 0x060000
[ 0.540658] pci 0000:00:18.7: [1022:1467] type 00 class 0x060000
[ 0.540777] pci 0000:03:00.0: [1022:43bc] type 00 class 0x0c0330
[ 0.540798] pci 0000:03:00.0: reg 0x10: [mem 0xf76a0000-0xf76a7fff 64bit]
[ 0.540872] pci 0000:03:00.0: PME# supported from D3hot D3cold
[ 0.540945] pci 0000:03:00.1: [1022:43b8] type 00 class 0x010601
[ 0.540990] pci 0000:03:00.1: reg 0x24: [mem 0xf7680000-0xf769ffff]
[ 0.540997] pci 0000:03:00.1: reg 0x30: [mem 0xf7600000-0xf767ffff pref]
[ 0.541034] pci 0000:03:00.1: PME# supported from D3hot D3cold
[ 0.541084] pci 0000:03:00.2: [1022:43b3] type 01 class 0x060400
[ 0.541155] pci 0000:03:00.2: PME# supported from D3hot D3cold
[ 0.541237] pci 0000:00:01.3: PCI bridge to [bus 03-25]
[ 0.541240] pci 0000:00:01.3: bridge window [io 0xf000-0xffff]
[ 0.541242] pci 0000:00:01.3: bridge window [mem 0xf7500000-0xf76fffff]
[ 0.541306] pci 0000:1d:04.0: [1022:43b4] type 01 class 0x060400
[ 0.541389] pci 0000:1d:04.0: PME# supported from D3hot D3cold
[ 0.541455] pci 0000:1d:05.0: [1022:43b4] type 01 class 0x060400
[ 0.541537] pci 0000:1d:05.0: PME# supported from D3hot D3cold
[ 0.541601] pci 0000:1d:06.0: [1022:43b4] type 01 class 0x060400
[ 0.541683] pci 0000:1d:06.0: PME# supported from D3hot D3cold
[ 0.541750] pci 0000:1d:07.0: [1022:43b4] type 01 class 0x060400
[ 0.541833] pci 0000:1d:07.0: PME# supported from D3hot D3cold
[ 0.541910] pci 0000:03:00.2: PCI bridge to [bus 1d-25]
[ 0.541915] pci 0000:03:00.2: bridge window [io 0xf000-0xffff]
[ 0.541917] pci 0000:03:00.2: bridge window [mem 0xf7500000-0xf75fffff]
[ 0.541960] pci 0000:1d:04.0: PCI bridge to [bus 22]
[ 0.541998] pci 0000:1d:05.0: PCI bridge to [bus 23]
[ 0.542065] pci 0000:24:00.0: [10ec:8168] type 00 class 0x020000
[ 0.542106] pci 0000:24:00.0: reg 0x10: [io 0xf000-0xf0ff]
[ 0.542142] pci 0000:24:00.0: reg 0x18: [mem 0xf7504000-0xf7504fff 64bit]
[ 0.542164] pci 0000:24:00.0: reg 0x20: [mem 0xf7500000-0xf7503fff 64bit]
[ 0.542290] pci 0000:24:00.0: supports D1 D2
[ 0.542291] pci 0000:24:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.542469] pci 0000:1d:06.0: PCI bridge to [bus 24]
[ 0.542474] pci 0000:1d:06.0: bridge window [io 0xf000-0xffff]
[ 0.542477] pci 0000:1d:06.0: bridge window [mem 0xf7500000-0xf75fffff]
[ 0.542520] pci 0000:1d:07.0: PCI bridge to [bus 25]
[ 0.542599] pci 0000:26:00.0: [10de:128b] type 00 class 0x030000
[ 0.542624] pci 0000:26:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff]
[ 0.542637] pci 0000:26:00.0: reg 0x14: [mem 0xe8000000-0xefffffff 64bit pref]
[ 0.542650] pci 0000:26:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
[ 0.542658] pci 0000:26:00.0: reg 0x24: [io 0xe000-0xe07f]
[ 0.542667] pci 0000:26:00.0: reg 0x30: [mem 0xf7000000-0xf707ffff pref]
[ 0.542764] pci 0000:26:00.0: 16.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x8 link at 0000:00:03.1 (capable of 63.008 Gb/s with 8 GT/s x8 link)
[ 0.542808] pci 0000:26:00.1: [10de:0e0f] type 00 class 0x040300
[ 0.542828] pci 0000:26:00.1: reg 0x10: [mem 0xf7080000-0xf7083fff]
[ 0.542981] pci 0000:00:03.1: ASPM: current common clock configuration is broken, reconfiguring
[ 0.553387] pci 0000:00:03.1: PCI bridge to [bus 26]
[ 0.553393] pci 0000:00:03.1: bridge window [io 0xe000-0xefff]
[ 0.553396] pci 0000:00:03.1: bridge window [mem 0xf6000000-0xf70fffff]
[ 0.553400] pci 0000:00:03.1: bridge window [mem 0xe8000000-0xf1ffffff 64bit pref]
[ 0.553492] pci 0000:27:00.0: [1022:145a] type 00 class 0x130000
[ 0.553527] pci 0000:27:00.0: enabling Extended Tags
[ 0.553609] pci 0000:27:00.2: [1022:1456] type 00 class 0x108000
[ 0.553626] pci 0000:27:00.2: reg 0x18: [mem 0xf7300000-0xf73fffff]
[ 0.553638] pci 0000:27:00.2: reg 0x24: [mem 0xf7400000-0xf7401fff]
[ 0.553645] pci 0000:27:00.2: enabling Extended Tags
[ 0.553727] pci 0000:27:00.3: [1022:145c] type 00 class 0x0c0330
[ 0.553740] pci 0000:27:00.3: reg 0x10: [mem 0xf7200000-0xf72fffff 64bit]
[ 0.553762] pci 0000:27:00.3: enabling Extended Tags
[ 0.553788] pci 0000:27:00.3: PME# supported from D0 D3hot D3cold
[ 0.553840] pci 0000:00:07.1: PCI bridge to [bus 27]
[ 0.553843] pci 0000:00:07.1: bridge window [mem 0xf7200000-0xf74fffff]
[ 0.553895] pci 0000:28:00.0: [1022:1455] type 00 class 0x130000
[ 0.553929] pci 0000:28:00.0: enabling Extended Tags
[ 0.553992] pci 0000:28:00.2: [1022:7901] type 00 class 0x010601
[ 0.554019] pci 0000:28:00.2: reg 0x24: [mem 0xf7708000-0xf7708fff]
[ 0.554027] pci 0000:28:00.2: enabling Extended Tags
[ 0.554053] pci 0000:28:00.2: PME# supported from D3hot D3cold
[ 0.554099] pci 0000:28:00.3: [1022:1457] type 00 class 0x040300
[ 0.554109] pci 0000:28:00.3: reg 0x10: [mem 0xf7700000-0xf7707fff]
[ 0.554134] pci 0000:28:00.3: enabling Extended Tags
[ 0.554159] pci 0000:28:00.3: PME# supported from D0 D3hot D3cold
[ 0.554211] pci 0000:00:08.1: PCI bridge to [bus 28]
[ 0.554214] pci 0000:00:08.1: bridge window [mem 0xf7700000-0xf77fffff]
[ 0.554661] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 11 14 15) *0
[ 0.554721] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 11 14 15) *0
[ 0.554773] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 11 14 15) *0
[ 0.554836] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 10 11 14 15) *0
[ 0.554894] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0
[ 0.554941] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0
[ 0.554992] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0
[ 0.555044] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0
[ 0.556705] pci 0000:26:00.0: vgaarb: setting as boot VGA device
[ 0.556705] pci 0000:26:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.556705] pci 0000:26:00.0: vgaarb: bridge control possible
[ 0.556705] vgaarb: loaded
[ 0.556811] ACPI: bus type USB registered
[ 0.556820] usbcore: registered new interface driver usbfs
[ 0.556824] usbcore: registered new interface driver hub
[ 0.556858] usbcore: registered new device driver usb
[ 0.556873] pps_core: LinuxPPS API ver. 1 registered
[ 0.556874] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.556875] PTP clock support registered
[ 0.556881] EDAC MC: Ver: 3.0.0
[ 0.556959] PCI: Using ACPI for IRQ routing
[ 0.559093] PCI: pci_cache_line_size set to 64 bytes
[ 0.559151] e820: reserve RAM buffer [mem 0x0009d400-0x0009ffff]
[ 0.559152] e820: reserve RAM buffer [mem 0x09d00000-0x0bffffff]
[ 0.559152] e820: reserve RAM buffer [mem 0xda7ea000-0xdbffffff]
[ 0.559153] e820: reserve RAM buffer [mem 0xdaa99000-0xdbffffff]
[ 0.559154] e820: reserve RAM buffer [mem 0xde000000-0xdfffffff]
[ 0.559154] e820: reserve RAM buffer [mem 0x81f380000-0x81fffffff]
[ 0.560010] NetLabel: Initializing
[ 0.560010] NetLabel: domain hash size = 128
[ 0.560010] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.560010] NetLabel: unlabeled traffic allowed by default
[ 0.560042] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.560044] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.563344] clocksource: Switched to clocksource tsc-early
[ 0.572134] VFS: Disk quotas dquot_6.6.0
[ 0.572151] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.572205] pnp: PnP ACPI init
[ 0.572309] system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.572313] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.572376] system 00:01: [mem 0xfeb80000-0xfebfffff] could not be reserved
[ 0.572379] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.572481] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.572638] system 00:03: [io 0x0300-0x030f] has been reserved
[ 0.572640] system 00:03: [io 0x0230-0x023f] has been reserved
[ 0.572641] system 00:03: [io 0x0290-0x029f] has been reserved
[ 0.572644] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.572913] pnp 00:04: [dma 0 disabled]
[ 0.572949] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.573164] system 00:05: [io 0x04d0-0x04d1] has been reserved
[ 0.573166] system 00:05: [io 0x040b] has been reserved
[ 0.573167] system 00:05: [io 0x04d6] has been reserved
[ 0.573168] system 00:05: [io 0x0c00-0x0c01] has been reserved
[ 0.573169] system 00:05: [io 0x0c14] has been reserved
[ 0.573170] system 00:05: [io 0x0c50-0x0c51] has been reserved
[ 0.573171] system 00:05: [io 0x0c52] has been reserved
[ 0.573172] system 00:05: [io 0x0c6c] has been reserved
[ 0.573173] system 00:05: [io 0x0c6f] has been reserved
[ 0.573174] system 00:05: [io 0x0cd0-0x0cd1] has been reserved
[ 0.573175] system 00:05: [io 0x0cd2-0x0cd3] has been reserved
[ 0.573176] system 00:05: [io 0x0cd4-0x0cd5] has been reserved
[ 0.573177] system 00:05: [io 0x0cd6-0x0cd7] has been reserved
[ 0.573178] system 00:05: [io 0x0cd8-0x0cdf] has been reserved
[ 0.573179] system 00:05: [io 0x0800-0x089f] has been reserved
[ 0.573180] system 00:05: [io 0x0b00-0x0b0f] has been reserved
[ 0.573181] system 00:05: [io 0x0b20-0x0b3f] has been reserved
[ 0.573182] system 00:05: [io 0x0900-0x090f] has been reserved
[ 0.573183] system 00:05: [io 0x0910-0x091f] has been reserved
[ 0.573185] system 00:05: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.573186] system 00:05: [mem 0xfec01000-0xfec01fff] could not be reserved
[ 0.573187] system 00:05: [mem 0xfedc0000-0xfedc0fff] has been reserved
[ 0.573188] system 00:05: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.573190] system 00:05: [mem 0xfed80000-0xfed8ffff] could not be reserved
[ 0.573191] system 00:05: [mem 0xfec10000-0xfec10fff] has been reserved
[ 0.573192] system 00:05: [mem 0xff000000-0xffffffff] has been reserved
[ 0.573195] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.573568] pnp: PnP ACPI: found 6 devices
[ 0.579391] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.579440] pci 0000:1d:04.0: PCI bridge to [bus 22]
[ 0.579450] pci 0000:1d:05.0: PCI bridge to [bus 23]
[ 0.579459] pci 0000:1d:06.0: PCI bridge to [bus 24]
[ 0.579461] pci 0000:1d:06.0: bridge window [io 0xf000-0xffff]
[ 0.579464] pci 0000:1d:06.0: bridge window [mem 0xf7500000-0xf75fffff]
[ 0.579471] pci 0000:1d:07.0: PCI bridge to [bus 25]
[ 0.579479] pci 0000:03:00.2: PCI bridge to [bus 1d-25]
[ 0.579481] pci 0000:03:00.2: bridge window [io 0xf000-0xffff]
[ 0.579484] pci 0000:03:00.2: bridge window [mem 0xf7500000-0xf75fffff]
[ 0.579490] pci 0000:00:01.3: PCI bridge to [bus 03-25]
[ 0.579492] pci 0000:00:01.3: bridge window [io 0xf000-0xffff]
[ 0.579494] pci 0000:00:01.3: bridge window [mem 0xf7500000-0xf76fffff]
[ 0.579498] pci 0000:00:03.1: PCI bridge to [bus 26]
[ 0.579499] pci 0000:00:03.1: bridge window [io 0xe000-0xefff]
[ 0.579502] pci 0000:00:03.1: bridge window [mem 0xf6000000-0xf70fffff]
[ 0.579504] pci 0000:00:03.1: bridge window [mem 0xe8000000-0xf1ffffff 64bit pref]
[ 0.579508] pci 0000:00:07.1: PCI bridge to [bus 27]
[ 0.579510] pci 0000:00:07.1: bridge window [mem 0xf7200000-0xf74fffff]
[ 0.579514] pci 0000:00:08.1: PCI bridge to [bus 28]
[ 0.579516] pci 0000:00:08.1: bridge window [mem 0xf7700000-0xf77fffff]
[ 0.579521] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window]
[ 0.579522] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window]
[ 0.579523] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window]
[ 0.579524] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
[ 0.579525] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
[ 0.579526] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
[ 0.579527] pci_bus 0000:00: resource 10 [mem 0xe0000000-0xf7ffffff window]
[ 0.579528] pci_bus 0000:03: resource 0 [io 0xf000-0xffff]
[ 0.579529] pci_bus 0000:03: resource 1 [mem 0xf7500000-0xf76fffff]
[ 0.579530] pci_bus 0000:1d: resource 0 [io 0xf000-0xffff]
[ 0.579531] pci_bus 0000:1d: resource 1 [mem 0xf7500000-0xf75fffff]
[ 0.579532] pci_bus 0000:24: resource 0 [io 0xf000-0xffff]
[ 0.579533] pci_bus 0000:24: resource 1 [mem 0xf7500000-0xf75fffff]
[ 0.579534] pci_bus 0000:26: resource 0 [io 0xe000-0xefff]
[ 0.579535] pci_bus 0000:26: resource 1 [mem 0xf6000000-0xf70fffff]
[ 0.579536] pci_bus 0000:26: resource 2 [mem 0xe8000000-0xf1ffffff 64bit pref]
[ 0.579537] pci_bus 0000:27: resource 1 [mem 0xf7200000-0xf74fffff]
[ 0.579538] pci_bus 0000:28: resource 1 [mem 0xf7700000-0xf77fffff]
[ 0.579615] NET: Registered protocol family 2
[ 0.579796] tcp_listen_portaddr_hash hash table entries: 16384 (order: 6, 262144 bytes)
[ 0.579870] TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.580147] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.580266] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.580311] UDP hash table entries: 16384 (order: 7, 524288 bytes)
[ 0.580384] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes)
[ 0.580498] NET: Registered protocol family 1
[ 0.580502] NET: Registered protocol family 44
[ 0.580656] pci 0000:26:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.580668] pci 0000:26:00.1: Linked as a consumer to 0000:26:00.0
[ 0.580777] PCI: CLS 64 bytes, default 64
[ 0.580810] Unpacking initramfs...
[ 0.680973] Freeing initrd memory: 9036K
[ 0.680989] AMD-Vi: IOMMU performance counters supported
[ 0.681097] pci 0000:00:00.2: can't derive routing for PCI INT A
[ 0.681098] pci 0000:00:00.2: PCI INT A: not connected
[ 0.681334] iommu: Adding device 0000:00:01.0 to group 0
[ 0.681437] iommu: Adding device 0000:00:01.3 to group 1
[ 0.681531] iommu: Adding device 0000:00:02.0 to group 2
[ 0.681640] iommu: Adding device 0000:00:03.0 to group 3
[ 0.681733] iommu: Adding device 0000:00:03.1 to group 4
[ 0.681831] iommu: Adding device 0000:00:04.0 to group 5
[ 0.681926] iommu: Adding device 0000:00:07.0 to group 6
[ 0.681940] iommu: Adding device 0000:00:07.1 to group 6
[ 0.682041] iommu: Adding device 0000:00:08.0 to group 7
[ 0.682056] iommu: Adding device 0000:00:08.1 to group 7
[ 0.682150] iommu: Adding device 0000:00:14.0 to group 8
[ 0.682163] iommu: Adding device 0000:00:14.3 to group 8
[ 0.682286] iommu: Adding device 0000:00:18.0 to group 9
[ 0.682299] iommu: Adding device 0000:00:18.1 to group 9
[ 0.682311] iommu: Adding device 0000:00:18.2 to group 9
[ 0.682325] iommu: Adding device 0000:00:18.3 to group 9
[ 0.682337] iommu: Adding device 0000:00:18.4 to group 9
[ 0.682349] iommu: Adding device 0000:00:18.5 to group 9
[ 0.682361] iommu: Adding device 0000:00:18.6 to group 9
[ 0.682373] iommu: Adding device 0000:00:18.7 to group 9
[ 0.682482] iommu: Adding device 0000:03:00.0 to group 10
[ 0.682502] iommu: Adding device 0000:03:00.1 to group 10
[ 0.682523] iommu: Adding device 0000:03:00.2 to group 10
[ 0.682535] iommu: Adding device 0000:1d:04.0 to group 10
[ 0.682547] iommu: Adding device 0000:1d:05.0 to group 10
[ 0.682559] iommu: Adding device 0000:1d:06.0 to group 10
[ 0.682570] iommu: Adding device 0000:1d:07.0 to group 10
[ 0.682590] iommu: Adding device 0000:24:00.0 to group 10
[ 0.682721] iommu: Adding device 0000:26:00.0 to group 11
[ 0.682745] iommu: Adding device 0000:26:00.1 to group 11
[ 0.682755] iommu: Adding device 0000:27:00.0 to group 6
[ 0.682765] iommu: Adding device 0000:27:00.2 to group 6
[ 0.682774] iommu: Adding device 0000:27:00.3 to group 6
[ 0.682784] iommu: Adding device 0000:28:00.0 to group 7
[ 0.682794] iommu: Adding device 0000:28:00.2 to group 7
[ 0.682803] iommu: Adding device 0000:28:00.3 to group 7
[ 0.683025] AMD-Vi: Found IOMMU at 0000:00:00.2 cap 0x40
[ 0.683025] AMD-Vi: Extended features (0xf77ef22294ada):
[ 0.683026] PPR NX GT IA GA PC GA_vAPIC
[ 0.683028] AMD-Vi: Interrupt remapping enabled
[ 0.683028] AMD-Vi: virtual APIC enabled
[ 0.683146] AMD-Vi: Lazy IO/TLB flushing enabled
[ 0.684037] amd_uncore: AMD NB counters detected
[ 0.684040] amd_uncore: AMD LLC counters detected
[ 0.684280] perf/amd_iommu: Detected AMD IOMMU #0 (2 banks, 4 counters/bank).
[ 0.684322] check: Scanning for low memory corruption every 60 seconds
[ 0.684850] Initialise system trusted keyrings
[ 0.684865] Key type blacklist registered
[ 0.684914] workingset: timestamp_bits=41 max_order=23 bucket_order=0
[ 0.685840] zbud: loaded
[ 0.724970] Key type asymmetric registered
[ 0.724971] Asymmetric key parser 'x509' registered
[ 0.724979] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
[ 0.725015] io scheduler noop registered
[ 0.725016] io scheduler deadline registered
[ 0.725041] io scheduler cfq registered (default)
[ 0.725041] io scheduler mq-deadline registered
[ 0.725042] io scheduler kyber registered
[ 0.725072] io scheduler bfq registered
[ 0.725353] aer 0000:00:01.3:pcie002: AER enabled with IRQ 26
[ 0.725461] aer 0000:00:03.1:pcie002: AER enabled with IRQ 27
[ 0.726179] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 0.726225] vesafb: mode is 1920x1080x32, linelength=7680, pages=0
[ 0.726226] vesafb: scrolling: redraw
[ 0.726227] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.726242] vesafb: framebuffer at 0xf1000000, mapped to 0x00000000bde1ceb8, using 8128k, total 8128k
[ 0.726286] fbcon: Deferring console take-over
[ 0.726286] fb0: VESA VGA frame buffer device
[ 0.726344] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.726351] ACPI: Power Button [PWRB]
[ 0.726386] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.726396] ACPI: Power Button [PWRF]
[ 0.727371] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.748406] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.749608] usbcore: registered new interface driver usbserial_generic
[ 0.749611] usbserial: USB Serial support registered for generic
[ 0.749637] rtc_cmos 00:02: RTC can wake from S4
[ 0.749897] rtc_cmos 00:02: registered as rtc0
[ 0.749907] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.750128] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.750306] NET: Registered protocol family 10
[ 0.754050] Segment Routing with IPv6
[ 0.754063] NET: Registered protocol family 17
[ 0.754798] RAS: Correctable Errors collector initialized.
[ 0.754826] microcode: CPU0: patch_level=0x08001129
[ 0.754831] microcode: CPU1: patch_level=0x08001129
[ 0.754837] microcode: CPU2: patch_level=0x08001129
[ 0.754840] microcode: CPU3: patch_level=0x08001129
[ 0.754843] microcode: CPU4: patch_level=0x08001129
[ 0.754848] microcode: CPU5: patch_level=0x08001129
[ 0.754855] microcode: CPU6: patch_level=0x08001129
[ 0.754861] microcode: CPU7: patch_level=0x08001129
[ 0.754868] microcode: CPU8: patch_level=0x08001129
[ 0.754874] microcode: CPU9: patch_level=0x08001129
[ 0.754881] microcode: CPU10: patch_level=0x08001129
[ 0.754887] microcode: CPU11: patch_level=0x08001129
[ 0.754916] microcode: Microcode Update Driver: v2.2.
[ 0.754925] sched_clock: Marking stable (781571924, -26659111)->(878603804, -123690991)
[ 0.755258] registered taskstats version 1
[ 0.755264] Loading compiled-in X.509 certificates
[ 0.757573] Loaded X.509 cert 'Build time autogenerated kernel key: 0138fd63a261ba6db3be5b3e8299ee4407c2944b'
[ 0.757594] zswap: loaded using pool lzo/zbud
[ 0.761346] Key type big_key registered
[ 0.761635] Magic number: 7:969:529
[ 0.761785] rtc_cmos 00:02: setting system clock to 2019-02-18 11:32:43 UTC (1550489563)
[ 0.762775] Freeing unused decrypted memory: 2040K
[ 0.763044] Freeing unused kernel image memory: 1536K
[ 0.789009] Write protecting the kernel read-only data: 18432k
[ 0.789550] Freeing unused kernel image memory: 2016K
[ 0.789626] Freeing unused kernel image memory: 408K
[ 0.797336] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 0.797341] Run /init as init process
[ 0.807579] fbcon: Taking over console
[ 0.807639] Console: switching to colour frame buffer device 240x67
[ 0.891649] QUIRK: Enable AMD PLL fix
[ 0.891671] xhci_hcd 0000:03:00.0: xHCI Host Controller
[ 0.891679] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 1
[ 0.891883] SCSI subsystem initialized
[ 0.896736] libata version 3.00 loaded.
[ 0.898947] ahci 0000:03:00.1: version 3.0
[ 0.899067] ahci 0000:03:00.1: SSS flag set, parallel bus scan disabled
[ 0.899101] ahci 0000:03:00.1: AHCI 0001.0301 32 slots 8 ports 6 Gbps 0x33 impl SATA mode
[ 0.899102] ahci 0000:03:00.1: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part sxs deso sadm sds apst
[ 0.899582] scsi host0: ahci
[ 0.899735] scsi host1: ahci
[ 0.899922] scsi host2: ahci
[ 0.900316] scsi host3: ahci
[ 0.901999] scsi host4: ahci
[ 0.902122] scsi host5: ahci
[ 0.902241] scsi host6: ahci
[ 0.902350] scsi host7: ahci
[ 0.902405] ata1: SATA max UDMA/133 abar m131072@0xf7680000 port 0xf7680100 irq 38
[ 0.902406] ata2: SATA max UDMA/133 abar m131072@0xf7680000 port 0xf7680180 irq 38
[ 0.902407] ata3: DUMMY
[ 0.902408] ata4: DUMMY
[ 0.902409] ata5: SATA max UDMA/133 abar m131072@0xf7680000 port 0xf7680300 irq 38
[ 0.902411] ata6: SATA max UDMA/133 abar m131072@0xf7680000 port 0xf7680380 irq 38
[ 0.902411] ata7: DUMMY
[ 0.902412] ata8: DUMMY
[ 0.902553] ahci 0000:28:00.2: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
[ 0.902555] ahci 0000:28:00.2: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part
[ 0.902688] scsi host8: ahci
[ 0.902737] ata9: SATA max UDMA/133 abar m4096@0xf7708000 port 0xf7708100 irq 40
[ 0.947048] xhci_hcd 0000:03:00.0: hcc params 0x0200ef81 hci version 0x110 quirks 0x0000000008000418
[ 0.947218] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.20
[ 0.947219] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.947221] usb usb1: Product: xHCI Host Controller
[ 0.947222] usb usb1: Manufacturer: Linux 4.20.8-arch1-1-ARCH xhci-hcd
[ 0.947223] usb usb1: SerialNumber: 0000:03:00.0
[ 0.947331] hub 1-0:1.0: USB hub found
[ 0.947343] hub 1-0:1.0: 9 ports detected
[ 0.952619] xhci_hcd 0000:03:00.0: xHCI Host Controller
[ 0.952622] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 2
[ 0.952624] xhci_hcd 0000:03:00.0: Host supports USB 3.10 Enhanced SuperSpeed
[ 0.952649] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 0.952667] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.20
[ 0.952668] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.952669] usb usb2: Product: xHCI Host Controller
[ 0.952669] usb usb2: Manufacturer: Linux 4.20.8-arch1-1-ARCH xhci-hcd
[ 0.952670] usb usb2: SerialNumber: 0000:03:00.0
[ 0.952741] hub 2-0:1.0: USB hub found
[ 0.952748] hub 2-0:1.0: 3 ports detected
[ 0.954624] xhci_hcd 0000:27:00.3: xHCI Host Controller
[ 0.954627] xhci_hcd 0000:27:00.3: new USB bus registered, assigned bus number 3
[ 0.954718] xhci_hcd 0000:27:00.3: hcc params 0x0270f665 hci version 0x100 quirks 0x0000000000000418
[ 0.954819] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.20
[ 0.954820] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.954821] usb usb3: Product: xHCI Host Controller
[ 0.954821] usb usb3: Manufacturer: Linux 4.20.8-arch1-1-ARCH xhci-hcd
[ 0.954822] usb usb3: SerialNumber: 0000:27:00.3
[ 0.955028] hub 3-0:1.0: USB hub found
[ 0.955034] hub 3-0:1.0: 4 ports detected
[ 0.955162] xhci_hcd 0000:27:00.3: xHCI Host Controller
[ 0.955164] xhci_hcd 0000:27:00.3: new USB bus registered, assigned bus number 4
[ 0.955166] xhci_hcd 0000:27:00.3: Host supports USB 3.0 SuperSpeed
[ 0.955178] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[ 0.955193] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.20
[ 0.955195] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.955196] usb usb4: Product: xHCI Host Controller
[ 0.955197] usb usb4: Manufacturer: Linux 4.20.8-arch1-1-ARCH xhci-hcd
[ 0.955198] usb usb4: SerialNumber: 0000:27:00.3
[ 0.955261] hub 4-0:1.0: USB hub found
[ 0.955267] hub 4-0:1.0: 4 ports detected
[ 1.221601] ata9: SATA link down (SStatus 0 SControl 300)
[ 1.277103] usb 1-9: new low-speed USB device number 2 using xhci_hcd
[ 1.280433] usb 3-2: new high-speed USB device number 2 using xhci_hcd
[ 1.370459] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.370778] ata1.00: supports DRM functions and may not be fully accessible
[ 1.371705] ata1.00: ATA-11: Samsung SSD 860 EVO 500GB, RVT01B6Q, max UDMA/133
[ 1.371706] ata1.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 32), AA
[ 1.374030] ata1.00: supports DRM functions and may not be fully accessible
[ 1.376770] ata1.00: configured for UDMA/133
[ 1.377194] scsi 0:0:0:0: Direct-Access ATA Samsung SSD 860 1B6Q PQ: 0 ANSI: 5
[ 1.598904] usb 1-9: New USB device found, idVendor=046d, idProduct=c31c, bcdDevice=64.00
[ 1.598906] usb 1-9: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.598908] usb 1-9: Product: USB Keyboard
[ 1.598909] usb 1-9: Manufacturer: Logitech
[ 1.628415] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.643945] usb 3-2: New USB device found, idVendor=046d, idProduct=0825, bcdDevice= 0.12
[ 1.643947] usb 3-2: New USB device strings: Mfr=0, Product=0, SerialNumber=2
[ 1.643948] usb 3-2: SerialNumber: DDAFE0A0
[ 1.667216] usbcore: registered new interface driver usbhid
[ 1.667218] usbhid: USB HID core driver
[ 1.668977] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-9/1-9:1.0/0003:046D:C31C.0001/input/input2
[ 1.689899] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.703768] tsc: Refined TSC clocksource calibration: 3193.997 MHz
[ 1.703780] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2e0a2341f6f, max_idle_ns: 440795327845 ns
[ 1.703822] clocksource: Switched to clocksource tsc
[ 1.723847] hid-generic 0003:046D:C31C.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:03:00.0-9/input0
[ 1.724006] input: Logitech USB Keyboard Consumer Control as /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-9/1-9:1.1/0003:046D:C31C.0002/input/input3
[ 1.780493] input: Logitech USB Keyboard System Control as /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-9/1-9:1.1/0003:046D:C31C.0002/input/input4
[ 1.780550] hid-generic 0003:046D:C31C.0002: input,hidraw1: USB HID v1.10 Device [Logitech USB Keyboard] on usb-0000:03:00.0-9/input1
[ 1.797087] usb 3-3: new low-speed USB device number 3 using xhci_hcd
[ 1.970405] usb 3-3: New USB device found, idVendor=046d, idProduct=c077, bcdDevice=72.00
[ 1.970407] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.970409] usb 3-3: Product: USB Optical Mouse
[ 1.970410] usb 3-3: Manufacturer: Logitech
[ 1.999162] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:07.1/0000:27:00.3/usb3/3-3/3-3:1.0/0003:046D:C077.0003/input/input5
[ 1.999230] hid-generic 0003:046D:C077.0003: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:27:00.3-3/input0
[ 2.003822] ata5: SATA link down (SStatus 0 SControl 300)
[ 2.314151] ata6: SATA link down (SStatus 0 SControl 300)
[ 2.320151] ata1.00: Enabling discard_zeroes_data
[ 2.320188] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[ 2.320195] sd 0:0:0:0: [sda] Write Protect is off
[ 2.320196] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.320205] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.320299] ata1.00: Enabling discard_zeroes_data
[ 2.323537] sda: sda1 sda2 sda3 sda4
[ 2.323896] ata1.00: Enabling discard_zeroes_data
[ 2.325388] sd 0:0:0:0: [sda] supports TCG Opal
[ 2.325390] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.372382] random: fast init done
[ 2.418109] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[ 2.501409] systemd[1]: systemd 240 running in system mode. (+PAM +AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[ 2.517193] systemd[1]: Detected architecture x86-64.
[ 2.525836] systemd[1]: Set hostname to <skynet>.
[ 2.595561] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ 2.598171] systemd[1]: Created slice system-getty.slice.
[ 2.600119] systemd[1]: Listening on Process Core Dump Socket.
[ 2.600273] systemd[1]: Listening on LVM2 poll daemon socket.
[ 2.600347] systemd[1]: Listening on Journal Audit Socket.
[ 2.600357] systemd[1]: Reached target Swap.
[ 2.600409] systemd[1]: Listening on Journal Socket.
[ 2.615557] EXT4-fs (sda4): re-mounted. Opts: (null)
[ 2.618689] random: lvm: uninitialized urandom read (4 bytes read)
[ 2.621292] audit: type=1130 audit(1550489565.355:2): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=lvm2-lvmetad comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 2.621658] random: systemd-random-: uninitialized urandom read (512 bytes read)
[ 2.622360] audit: type=1130 audit(1550489565.355:3): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-random-seed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 2.629270] audit: type=1130 audit(1550489565.362:4): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-sysusers comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 2.638907] audit: type=1130 audit(1550489565.372:5): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-setup-dev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 2.645731] audit: type=1130 audit(1550489565.378:6): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 2.653357] systemd-journald[369]: Received request to flush runtime journal from PID 1
[ 2.658504] systemd-journald[369]: File /var/log/journal/6e1615886332458a938e364b3d6ec1c6/system.journal corrupted or uncleanly shut down, renaming and replacing.
[ 2.663971] audit: type=1130 audit(1550489565.398:7): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-udevd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 2.670630] audit: type=1130 audit(1550489565.405:8): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-udev-trigger comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 2.689471] acpi_cpufreq: overriding BIOS provided _PSD data
[ 2.692539] audit: type=1130 audit(1550489565.425:9): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-networkd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 2.696808] acpi PNP0C14:01: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
[ 2.711369] audit: type=1130 audit(1550489565.445:10): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journal-flush comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 2.719618] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 2.771338] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 2.771346] piix4_smbus 0000:00:14.0: Using register 0x02 for SMBus port selection
[ 2.774441] cryptd: max_cpu_qlen set to 1000
[ 2.778551] mousedev: PS/2 mouse device common for all mice
[ 2.779728] media: Linux media interface: v0.10
[ 2.779873] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver
[ 2.779999] sp5100-tco sp5100-tco: Using 0xfed80b00 for watchdog MMIO address
[ 2.780019] sp5100-tco sp5100-tco: Watchdog hardware is disabled
[ 2.785768] Linux agpgart interface v0.103
[ 2.786401] asus_wmi: ASUS WMI generic driver loaded
[ 2.790132] ccp 0000:27:00.2: ccp enabled
[ 2.790160] ccp 0000:27:00.2: psp initialization failed
[ 2.790161] ccp 0000:27:00.2: enabled
[ 2.790498] AVX2 version of gcm_enc/dec engaged.
[ 2.790500] AES CTR mode by8 optimization enabled
[ 2.793616] asus_wmi: Initialization: 0x0
[ 2.793666] asus_wmi: BIOS WMI version: 0.9
[ 2.793836] asus_wmi: SFUN value: 0x0
[ 2.794583] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input7
[ 2.794776] asus_wmi: Number of fans: 1
[ 2.797509] libphy: r8169: probed
[ 2.797827] r8169 0000:24:00.0 eth0: RTL8168h/8111h, b0:6e:bf:61:51:67, XID 54100800, IRQ 47
[ 2.797829] r8169 0000:24:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 2.815787] r8169 0000:24:00.0 enp36s0: renamed from eth0
[ 2.818381] videodev: Linux video capture interface: v2.00
[ 2.832379] snd_hda_intel 0000:26:00.1: Disabling MSI
[ 2.832389] snd_hda_intel 0000:26:00.1: Handle vga_switcheroo audio client
[ 2.838823] Generic PHY r8169-2400:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=r8169-2400:00, irq=IGNORE)
[ 2.854555] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC887-VD: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[ 2.854557] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 2.854559] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 2.854560] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
[ 2.854562] snd_hda_codec_realtek hdaudioC1D0: dig-out=0x11/0x0
[ 2.854563] snd_hda_codec_realtek hdaudioC1D0: inputs:
[ 2.854565] snd_hda_codec_realtek hdaudioC1D0: Front Mic=0x19
[ 2.854567] snd_hda_codec_realtek hdaudioC1D0: Rear Mic=0x18
[ 2.854570] snd_hda_codec_realtek hdaudioC1D0: Line=0x1a
[ 2.869242] input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:08.1/0000:28:00.3/sound/card1/input8
[ 2.869296] input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:08.1/0000:28:00.3/sound/card1/input9
[ 2.869345] input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:08.1/0000:28:00.3/sound/card1/input10
[ 2.869395] input: HD-Audio Generic Line Out as /devices/pci0000:00/0000:00:08.1/0000:28:00.3/sound/card1/input11
[ 2.869438] input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:08.1/0000:28:00.3/sound/card1/input12
[ 2.914101] random: dbus-daemon: uninitialized urandom read (12 bytes read)
[ 2.926644] kvm: Nested Virtualization enabled
[ 2.926649] kvm: Nested Paging enabled
[ 2.926649] SVM: Virtual VMLOAD VMSAVE supported
[ 2.926650] SVM: Virtual GIF supported
[ 2.932152] MCE: In-kernel MCE decoding enabled.
[ 2.935365] EDAC amd64: Node 0: DRAM ECC disabled.
[ 2.935367] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
[ 2.939360] IPv6: ADDRCONF(NETDEV_UP): enp36s0: link is not ready
[ 2.959671] checking generic (f1000000 7f0000) vs hw (e8000000 8000000)
[ 2.959673] checking generic (f1000000 7f0000) vs hw (f0000000 2000000)
[ 2.959675] fb0: switching to nouveaufb from VESA VGA
[ 2.959701] Console: switching to colour dummy device 80x25
[ 2.959857] nouveau 0000:26:00.0: NVIDIA GK208B (b060b0b1)
[ 2.977619] EDAC amd64: Node 0: DRAM ECC disabled.
[ 2.977620] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
[ 3.020978] EDAC amd64: Node 0: DRAM ECC disabled.
[ 3.020979] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
[ 3.073865] nouveau 0000:26:00.0: bios: version 80.28.b8.00.05
[ 3.074583] nouveau 0000:26:00.0: fb: 1024 MiB GDDR5
[ 3.077587] EDAC amd64: Node 0: DRAM ECC disabled.
[ 3.077589] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
[ 3.117416] EDAC amd64: Node 0: DRAM ECC disabled.
[ 3.117418] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
[ 3.377518] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.1/0000:26:00.1/sound/card0/input13
[ 3.377575] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.1/0000:26:00.1/sound/card0/input14
[ 4.191218] [TTM] Zone kernel: Available graphics memory: 16466388 kiB
[ 4.191219] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 4.191220] [TTM] Initializing pool allocator
[ 4.191223] [TTM] Initializing DMA pool allocator
[ 4.191235] nouveau 0000:26:00.0: DRM: VRAM: 1024 MiB
[ 4.191236] nouveau 0000:26:00.0: DRM: GART: 1048576 MiB
[ 4.191239] nouveau 0000:26:00.0: DRM: TMDS table version 2.0
[ 4.191240] nouveau 0000:26:00.0: DRM: DCB version 4.0
[ 4.191241] nouveau 0000:26:00.0: DRM: DCB outp 00: 01000f02 00020030
[ 4.191243] nouveau 0000:26:00.0: DRM: DCB outp 01: 02011f62 00020010
[ 4.191244] nouveau 0000:26:00.0: DRM: DCB outp 02: 02022f10 00000000
[ 4.191245] nouveau 0000:26:00.0: DRM: DCB conn 00: 00001031
[ 4.191246] nouveau 0000:26:00.0: DRM: DCB conn 01: 00002161
[ 4.191247] nouveau 0000:26:00.0: DRM: DCB conn 02: 00000200
[ 4.192399] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 4.192400] [drm] Driver supports precise vblank timestamp query.
[ 4.193062] nouveau 0000:26:00.0: DRM: MM: using COPY for buffer copies
[ 4.318841] usb 3-2: set resolution quirk: cval->res = 384
[ 4.319034] usbcore: registered new interface driver snd-usb-audio
[ 4.319125] uvcvideo: Found UVC 1.00 device <unnamed> (046d:0825)
[ 4.360591] uvcvideo 3-2:1.0: Entity type for entity Extension 4 was not initialized!
[ 4.360594] uvcvideo 3-2:1.0: Entity type for entity Extension 6 was not initialized!
[ 4.360596] uvcvideo 3-2:1.0: Entity type for entity Extension 7 was not initialized!
[ 4.360598] uvcvideo 3-2:1.0: Entity type for entity Processing 2 was not initialized!
[ 4.360599] uvcvideo 3-2:1.0: Entity type for entity Extension 3 was not initialized!
[ 4.360601] uvcvideo 3-2:1.0: Entity type for entity Camera 1 was not initialized!
[ 4.360677] input: UVC Camera (046d:0825) as /devices/pci0000:00/0000:00:07.1/0000:27:00.3/usb3/3-2/3-2:1.0/input/input15
[ 4.360765] usbcore: registered new interface driver uvcvideo
[ 4.360766] USB Video Class driver (1.1.1)
[ 4.422795] nouveau 0000:26:00.0: DRM: allocated 1920x1080 fb: 0x80000, bo 000000003a7a1d29
[ 4.422888] fbcon: nouveaufb (fb0) is primary device
[ 4.469694] Console: switching to colour frame buffer device 240x67
[ 4.471889] nouveau 0000:26:00.0: fb0: nouveaufb frame buffer device
[ 4.503715] [drm] Initialized nouveau 1.3.1 20120801 for 0000:26:00.0 on minor 0
[ 7.171972] r8169 0000:24:00.0 enp36s0: Link is Up - 1Gbps/Full - flow control off
[ 7.171988] IPv6: ADDRCONF(NETDEV_CHANGE): enp36s0: link becomes ready
[ 11.236851] random: crng init done
[ 11.236856] random: 1 urandom warning(s) missed due to ratelimiting
[ 12.830933] kauditd_printk_skb: 12 callbacks suppressed
[ 12.830935] audit: type=1006 audit(1550489575.565:23): pid=519 uid=0 old-auid=4294967295 auid=1000 tty=tty1 old-ses=4294967295 ses=1 res=1
[ 12.846686] audit: type=1130 audit(1550489575.578:24): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user-runtime-dir@1000 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 12.853268] audit: type=1006 audit(1550489575.585:25): pid=532 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=2 res=1
[ 12.885036] systemd-journald[369]: File /var/log/journal/6e1615886332458a938e364b3d6ec1c6/user-1000.journal corrupted or uncleanly shut down, renaming and replacing.
[ 12.890907] audit: type=1130 audit(1550489575.625:26): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user@1000 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 45.338308] nouveau 0000:26:00.0: fifo: CHSW_ERROR 00000002
[ 45.338311] nouveau 0000:26:00.0: fifo: FB_FLUSH_TIMEOUT
[ 45.339353] nouveau 0000:26:00.0: fifo: CHSW_ERROR 00000002
[ 45.341040] nouveau 0000:26:00.0: fifo: CHSW_ERROR 00000002
[ 45.341043] nouveau 0000:26:00.0: fifo: FB_FLUSH_TIMEOUT
[ 45.341913] nouveau 0000:26:00.0: fifo: CHSW_ERROR 00000002
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
You can’t perform that action at this time.