Created
September 14, 2012 17:23
-
-
Save nonakap/3723347 to your computer and use it in GitHub Desktop.
NetBSD dmesg on Apple MacBook Air Mid 2011
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, | |
| 2006, 2007, 2008, 2009, 2010, 2011, 2012 | |
| The NetBSD Foundation, Inc. All rights reserved. | |
| Copyright (c) 1982, 1986, 1989, 1991, 1993 | |
| The Regents of the University of California. All rights reserved. | |
| NetBSD 6.0_RC1 (GENERIC) | |
| total memory = 4006 MB | |
| avail memory = 3875 MB | |
| timecounter: Timecounters tick every 10.000 msec | |
| RTC BIOS diagnostic error 0xff<clock_battery,ROM_cksum,config_unit,memory_size,fixed_disk,invalid_time> | |
| timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100 | |
| Apple Inc. MacBookAir4,1 (1.0) | |
| mainbus0 (root) | |
| cpu0 at mainbus0 apid 0: Intel(R) Core(TM) i5-2467M CPU @ 1.60GHz, id 0x206a7 | |
| cpu1 at mainbus0 apid 2: Intel(R) Core(TM) i5-2467M CPU @ 1.60GHz, id 0x206a7 | |
| cpu2 at mainbus0 apid 1: Intel(R) Core(TM) i5-2467M CPU @ 1.60GHz, id 0x206a7 | |
| cpu3 at mainbus0 apid 3: Intel(R) Core(TM) i5-2467M CPU @ 1.60GHz, id 0x206a7 | |
| ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 20, 24 pins | |
| acpi0 at mainbus0: Intel ACPICA 20110623 | |
| acpi0: X/RSDT: OemId <APPLE , Apple00,00000060>, AslId < ,01000013> | |
| acpiecdt0 at acpi0: ACPI Embedded Controller via ECDT | |
| acpi0: SCI interrupting at int 9 | |
| timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000 | |
| hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400) | |
| timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000 | |
| acpiec0 at acpi0 (EC, PNP0C09-0): using acpiecdt0 | |
| acpivga0 at acpi0 (IGPU): ACPI Display Adapter | |
| acpiout0 at acpivga0 (DD01, 0x0100): ACPI Display Output Device | |
| acpiout1 at acpivga0 (DD02, 0x0400): ACPI Display Output Device | |
| acpiout1: brightness levels: 0 7 13 20 27 33 40 47 53 60 67 73 80 87 93 100 | |
| acpiout2 at acpivga0 (DD03, 0x0200): ACPI Display Output Device | |
| acpiout3 at acpivga0 (DD04, 0x0004): ACPI Display Output Device | |
| acpiout4 at acpivga0 (DD05, 0x0005): ACPI Display Output Device | |
| acpiout5 at acpivga0 (DD06, 0x0006): ACPI Display Output Device | |
| acpiout6 at acpivga0 (DD07, 0x0007): ACPI Display Output Device | |
| acpiout7 at acpivga0 (DD08, 0x0008): ACPI Display Output Device | |
| acpivga0: unknown output device acpiout0 | |
| acpivga0: unknown output device acpiout2 | |
| acpivga0: unknown output device acpiout3 | |
| acpivga0: unknown output device acpiout4 | |
| acpivga0: unknown output device acpiout5 | |
| acpivga0: unknown output device acpiout6 | |
| acpivga0: unknown output device acpiout7 | |
| acpivga0: connected output devices: | |
| acpivga0: 0x0400 (acpiout1): Unknown Output Device, head 0 | |
| FWHD (INT0800) at acpi0 not configured | |
| LDRC (PNP0C02) at acpi0 not configured | |
| attimer1 at acpi0 (TIMR, PNP0100): io 0x40-0x43,0x50-0x53 | |
| SMC (APP0001) at acpi0 not configured | |
| ALS0 (ACPI0008) at acpi0 not configured | |
| SBS0 (ACPI0002) at acpi0 not configured | |
| PDRC (PNP0C02) at acpi0 not configured | |
| acpibat0 at acpi0 (BAT0, PNP0C0A-0): ACPI Battery | |
| acpiacad0 at acpi0 (ADP1, ACPI0003): ACPI AC Adapter | |
| acpilid0 at acpi0 (LID0, PNP0C0D): ACPI Lid Switch | |
| acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button | |
| PNLF (APP0002) at acpi0 not configured | |
| acpibut1 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button | |
| MEM2 (PNP0C01) at acpi0 not configured | |
| pci0 at mainbus0 bus 0: configuration mode 1 | |
| pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok | |
| pchb0 at pci0 dev 0 function 0: vendor 0x8086 product 0x0104 (rev. 0x09) | |
| ppb0 at pci0 dev 1 function 0: vendor 0x8086 product 0x0101 (rev. 0x09) | |
| ppb0: PCI Express 2.0 <Root Port of PCI-E Root Complex> | |
| pci1 at ppb0 bus 3 | |
| pci1: i/o space, memory space enabled, rd/line, wr/inv ok | |
| ppb1 at pci1 dev 0 function 0: vendor 0x8086 product 0x151a (rev. 0x01) | |
| ppb1: PCI Express 2.0 <Upstream Port of PCI-E Switch> | |
| pci2 at ppb1 bus 4 | |
| pci2: i/o space, memory space enabled, rd/line, wr/inv ok | |
| ppb2 at pci2 dev 0 function 0: vendor 0x8086 product 0x151a (rev. 0x01) | |
| ppb2: PCI Express 2.0 <Downstream Port of PCI-E Switch> | |
| pci3 at ppb2 bus 5 | |
| pci3: i/o space, memory space enabled, rd/line, wr/inv ok | |
| vendor 0x8086 product 0x151a (miscellaneous system, revision 0x01) at pci3 dev 0 function 0 not configured | |
| ppb3 at pci2 dev 3 function 0: vendor 0x8086 product 0x151a (rev. 0x01) | |
| ppb3: PCI Express 2.0 <Downstream Port of PCI-E Switch> | |
| pci4 at ppb3 bus 6 | |
| pci4: i/o space, memory space enabled, rd/line, wr/inv ok | |
| ppb4 at pci2 dev 4 function 0: vendor 0x8086 product 0x151a (rev. 0x01) | |
| ppb4: PCI Express 2.0 <Downstream Port of PCI-E Switch> | |
| pci5 at ppb4 bus 55 | |
| pci5: i/o space, memory space enabled, rd/line, wr/inv ok | |
| vga0 at pci0 dev 2 function 0: vendor 0x8086 product 0x0116 (rev. 0x09) | |
| wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation) | |
| wsmux1: connecting to wsdisplay0 | |
| drm at vga0 not configured | |
| vendor 0x8086 product 0x1c3a (miscellaneous communications, revision 0x04) at pci0 dev 22 function 0 not configured | |
| uhci0 at pci0 dev 26 function 0: vendor 0x8086 product 0x1c2c (rev. 0x05) | |
| uhci0: interrupting at ioapic0 pin 21 | |
| usb0 at uhci0: USB revision 1.0 | |
| ehci0 at pci0 dev 26 function 7: vendor 0x8086 product 0x1c2d (rev. 0x05) | |
| ehci0: interrupting at ioapic0 pin 23 | |
| ehci0: EHCI version 1.0 | |
| ehci0: wrong number of companions (3 != 1) | |
| ehci0: companion controller, 2 ports each: uhci0 | |
| usb1 at ehci0: USB revision 2.0 | |
| hdaudio0 at pci0 dev 27 function 0: HD Audio Controller | |
| hdaudio0: interrupting at ioapic0 pin 22 | |
| hdafg0 at hdaudio0: vendor 1013 product 4206 | |
| hdafg0: ADC00 2ch: Mic In [Built-In] | |
| hdafg0: DAC01 2ch: Speaker [Built-In] | |
| hdafg0: DAC02 2ch: HP Out [Jack] | |
| hdafg0: 2ch/2ch 32000Hz 44100Hz 48000Hz 88200Hz 96000Hz 192000Hz PCM16 PCM20 PCM24 PCM32 AC3 | |
| audio0 at hdafg0: full duplex, playback, capture, independent | |
| hdafg1 at hdaudio0: Intel product 2805 | |
| hdafg1: duplicate pin in association | |
| hdafg1: duplicate pin in association | |
| hdafg1: 0ch/0ch 48000Hz PCM16* | |
| ppb5 at pci0 dev 28 function 0: vendor 0x8086 product 0x1c10 (rev. 0xb5) | |
| ppb5: PCI Express 2.0 <Root Port of PCI-E Root Complex> | |
| pci6 at ppb5 bus 1 | |
| pci6: i/o space, memory space enabled, rd/line, wr/inv ok | |
| ppb6 at pci0 dev 28 function 1: vendor 0x8086 product 0x1c12 (rev. 0xb5) | |
| ppb6: PCI Express 2.0 <Root Port of PCI-E Root Complex> | |
| pci7 at ppb6 bus 2 | |
| pci7: i/o space, memory space enabled, rd/line, wr/inv ok | |
| vendor 0x14e4 product 0x4353 (miscellaneous network, revision 0x01) at pci7 dev 0 function 0 not configured | |
| uhci1 at pci0 dev 29 function 0: vendor 0x8086 product 0x1c27 (rev. 0x05) | |
| uhci1: interrupting at ioapic0 pin 19 | |
| usb2 at uhci1: USB revision 1.0 | |
| ehci1 at pci0 dev 29 function 7: vendor 0x8086 product 0x1c26 (rev. 0x05) | |
| ehci1: interrupting at ioapic0 pin 22 | |
| ehci1: EHCI version 1.0 | |
| ehci1: wrong number of companions (4 != 1) | |
| ehci1: companion controller, 2 ports each: uhci1 | |
| usb3 at ehci1: USB revision 2.0 | |
| ichlpcib0 at pci0 dev 31 function 0: vendor 0x8086 product 0x1c4d (rev. 0x05) | |
| timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000 | |
| ichlpcib0: 24-bit timer | |
| ichlpcib0: TCO timer reboot disabled by hardware; hope SMBIOS properly handles it. | |
| ichlpcib0: TCO (watchdog) timer configured. | |
| piixide0 at pci0 dev 31 function 2: Intel 6 Series Serial ATA Controller (rev. 0x05) | |
| piixide0: bus-master DMA support present | |
| piixide0: primary channel configured to native-PCI mode | |
| piixide0: using ioapic0 pin 19 for native-PCI interrupt | |
| atabus0 at piixide0 channel 0 | |
| piixide0: secondary channel configured to native-PCI mode | |
| atabus1 at piixide0 channel 1 | |
| ichsmb0 at pci0 dev 31 function 3: vendor 0x8086 product 0x1c22 (rev. 0x05) | |
| ichsmb0: interrupting at ioapic0 pin 18 | |
| iic0 at ichsmb0: I2C bus | |
| isa0 at ichlpcib0 | |
| pcppi0 at isa0 port 0x61 | |
| midi0 at pcppi0: PC speaker | |
| sysbeep0 at pcppi0 | |
| attimer1: attached to pcppi0 | |
| acpicpu0 at cpu0: ACPI CPU | |
| acpicpu0: failed to evaluate _TSS: AE_LIMIT | |
| acpicpu0: C1: FFH, lat 1 us, pow 1000 mW | |
| acpicpu0: C2: FFH, lat 64 us, pow 500 mW | |
| acpicpu0: C3: FFH, lat 84 us, pow 200 mW | |
| acpicpu0: P0: FFH, lat 10 us, pow 24000 mW, 1601 MHz, turbo boost | |
| acpicpu0: P1: FFH, lat 10 us, pow 24000 mW, 1600 MHz | |
| acpicpu0: P2: FFH, lat 10 us, pow 22066 mW, 1500 MHz | |
| acpicpu0: P3: FFH, lat 10 us, pow 20406 mW, 1400 MHz | |
| acpicpu0: P4: FFH, lat 10 us, pow 18780 mW, 1300 MHz | |
| acpicpu0: P5: FFH, lat 10 us, pow 17188 mW, 1200 MHz | |
| acpicpu0: P6: FFH, lat 10 us, pow 15403 mW, 1100 MHz | |
| acpicpu0: P7: FFH, lat 10 us, pow 13882 mW, 1000 MHz | |
| acpicpu0: P8: FFH, lat 10 us, pow 12391 mW, 900 MHz | |
| acpicpu0: P9: FFH, lat 10 us, pow 10932 mW, 800 MHz | |
| acpicpu0: T0: I/O, lat 1 us, pow 0 mW, 100 % | |
| acpicpu0: T1: I/O, lat 1 us, pow 0 mW, 88 % | |
| acpicpu0: T2: I/O, lat 1 us, pow 0 mW, 76 % | |
| acpicpu0: T3: I/O, lat 1 us, pow 0 mW, 64 % | |
| acpicpu0: T4: I/O, lat 1 us, pow 0 mW, 52 % | |
| acpicpu0: T5: I/O, lat 1 us, pow 0 mW, 40 % | |
| acpicpu0: T6: I/O, lat 1 us, pow 0 mW, 28 % | |
| acpicpu0: T7: I/O, lat 1 us, pow 0 mW, 16 % | |
| coretemp0 at cpu0: thermal sensor, 1 C resolution | |
| acpicpu1 at cpu1: ACPI CPU | |
| acpicpu1: failed to evaluate _TSS: AE_LIMIT | |
| coretemp1 at cpu1: thermal sensor, 1 C resolution | |
| acpicpu2 at cpu2: ACPI CPU | |
| acpicpu2: failed to evaluate _TSS: AE_LIMIT | |
| acpicpu3 at cpu3: ACPI CPU | |
| acpicpu3: failed to evaluate _TSS: AE_LIMIT | |
| timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0 | |
| timecounter: Timecounter "TSC" frequency 1600137560 Hz quality 3000 | |
| acpiacad0: AC adapter offline. | |
| uhub0 at usb1: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 | |
| uhub0: 6 ports with 6 removable, self powered | |
| uhub1 at usb3: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 | |
| uhub1: 8 ports with 8 removable, self powered | |
| uhub2 at usb0: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 | |
| uhub2: 2 ports with 2 removable, self powered | |
| uhub3 at usb2: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 | |
| uhub3: 2 ports with 2 removable, self powered | |
| uhub4 at uhub1 port 1: vendor 0x0424 product 0x2513, class 9/0, rev 2.00/b.b3, addr 2 | |
| uhub4: multiple transaction translators | |
| uhub4: 1 port with 1 removable, self powered | |
| uhub5 at uhub0 port 1: vendor 0x0424 product 0x2513, class 9/0, rev 2.00/b.b3, addr 2 | |
| uhub5: multiple transaction translators | |
| uhub5: 3 ports with 1 removable, self powered | |
| wd0 at atabus0 drive 0 | |
| wd0: <APPLE SSD SM256C> | |
| wd0: drive supports 16-sector PIO transfers, LBA48 addressing | |
| wd0: 233 GB, 486344 cyl, 16 head, 63 sec, 512 bytes/sect x 490234752 sectors | |
| wd0: GPT GUID: 451c5fdd-5908-4449-b791-de586bc9df92 | |
| dk0 at wd0: EFI System Partition | |
| dk0: 409600 blocks at 40, type: msdos | |
| dk1 at wd0: Macintosh HD | |
| dk1: 488555536 blocks at 409640, type: hfs | |
| dk2 at wd0: Recovery HD | |
| dk2: 1269536 blocks at 488965176, type: | |
| wd0: 32-bit data port | |
| wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) | |
| wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA) | |
| uhub6 at uhub5 port 1: Apple Inc. BRCM20702 Hub, class 9/0, rev 2.00/1.00, addr 3 | |
| uhub6: 3 ports with 0 removable, self powered | |
| umass0 at uhub4 port 1 configuration 1 interface 0 | |
| umass0: GH PicoDP, rev 2.00/1.00, addr 3 | |
| umass0: using SCSI over Bulk-Only | |
| scsibus0 at umass0: 2 targets, 1 lun per target | |
| sd0 at scsibus0 target 0 lun 0: <GH, PicoDP, PMAP> disk removable | |
| sd0: 7640 MB, 1917 cyl, 255 head, 32 sec, 512 bytes/sect x 15646720 sectors | |
| uhidev0 at uhub6 port 1 configuration 1 interface 0 | |
| uhidev0: vendor 0x05ac product 0x820a, rev 2.00/1.00, addr 4, iclass 3/1 | |
| uhidev0: 1 report ids | |
| ukbd0 at uhidev0 reportid 1 | |
| wskbd0 at ukbd0: console keyboard, using wsdisplay0 | |
| uhidev1 at uhub6 port 2 configuration 1 interface 0 | |
| uhidev1: vendor 0x05ac product 0x820b, rev 2.00/1.00, addr 5, iclass 3/1 | |
| uhidev1: 2 report ids | |
| ums0 at uhidev1 reportid 2: 3 buttons | |
| wsmouse0 at ums0 mux 0 | |
| ugen0 at uhub6 port 3 | |
| ugen0: Apple Inc. Bluetooth USB Host Controller, rev 2.00/0.38, addr 6 | |
| uhidev2 at uhub5 port 2 configuration 1 interface 0 | |
| uhidev2: Apple Inc. Apple Internal Keyboard / Trackpad, rev 2.00/2.09, addr 7, iclass 3/1 | |
| uhidev2: 9 report ids | |
| ukbd1 at uhidev2 reportid 1 | |
| wskbd1 at ukbd1 mux 1 | |
| wskbd1: connecting to wsdisplay0 | |
| uhid0 at uhidev2 reportid 9: input=0, output=0, feature=3 | |
| uhidev3 at uhub5 port 2 configuration 1 interface 1 | |
| uhidev3: Apple Inc. Apple Internal Keyboard / Trackpad, rev 2.00/2.09, addr 7, iclass 3/0 | |
| uhidev3: 68 report ids | |
| uhid1 at uhidev3 reportid 68: input=511, output=0, feature=0 | |
| uhidev4 at uhub5 port 2 configuration 1 interface 2 | |
| uhidev4: Apple Inc. Apple Internal Keyboard / Trackpad, rev 2.00/2.09, addr 7, iclass 3/1 | |
| uhidev4: 2 report ids | |
| ums1 at uhidev4 reportid 2: 3 buttons | |
| wsmouse1 at ums1 mux 0 | |
| uvideo0 at uhub0 port 2 configuration 1 interface 0: Apple Inc. FaceTime Camera (Built-in), rev 2.00/6.46, addr 8 | |
| video0 at uvideo0: Apple Inc. FaceTime Camera (Built-in), rev 2.00/6.46, addr 8 | |
| Kernelized RAIDframe activated | |
| pad0: outputs: 44100Hz, 16-bit, stereo | |
| audio1 at pad0: half duplex, playback, capture | |
| boot device: sd0 | |
| root on sd0a dumps on sd0b | |
| root file system type: ffs | |
| wsdisplay0: screen 1 added (80x25, vt100 emulation) | |
| wsdisplay0: screen 2 added (80x25, vt100 emulation) | |
| wsdisplay0: screen 3 added (80x25, vt100 emulation) | |
| wsdisplay0: screen 4 added (80x25, vt100 emulation) |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment