dynabook AZ boot log

dynabook_AZ-bootlog.txt

==== Debug Console(Jul 29 2010 19:07:27) ====
Checking for android ota recovery 

OS will cold boot in 0 seconds if no input is detected

No Keyboard are detected - Booting Android
Cold-booting Linux

[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.29-arm2-svn1996 (si@project-laptop) (gcc version 4.4.0 (GCC) ) #1 SMP PREEMPT Thu Aug 5 02:04:36 CST 2010
[    0.000000] CPU: ARMv7 Processor [411fc090] revision 0 (ARMv7), cr=10c53c7f
[    0.000000] CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
[    0.000000] Machine: Tegra generic
[    0.000000] Framebuffer tag with 65536 handle
[    0.000000] Shmoo tag with 65537 handle
[    0.000000] Found a warmboot tag!
[    0.000000] Memory policy: ECC disabled, Data cache writealloc
[    0.000000] Chip Id: 0x20 (Handheld SOC) Major: 0x1 Minor: 0x2 SKU: 0x8
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 113792
[    0.000000] Kernel command line: mem=448M@0M nvmem=64M@448M vmalloc=320M video=tegrafb console=ttyS0,115200n8 usbcore.old_scheme_first=1 tegraboot=sdmmc tegrapart=recovery:700:a00:800,boot:1100:1000:800,mbr:2100:200:800,system:2300:25800:800,cache:27b00:32000:800,misc:59b00:400:800,userdata:5a000:9a600:800 
[    0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes)
[42949372.960000] Console: colour dummy device 80x30
[42949372.960000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[42949372.960000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[42949372.980000] Memory: 448MB = 448MB total
[42949372.980000] Memory: 449280KB available (3964K code, 873K data, 128K init, 0K highmem)
[42949372.980000] SLUB: Genslabs=10, HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[42949372.980000] Calibrating delay loop... 1998.84 BogoMIPS (lpj=9994240)
[42949373.250000] Mount-cache hash table entries: 512
[42949373.250000] Initializing cgroup subsys cpuacct
[42949373.250000] Initializing cgroup subsys devices
[42949373.250000] Initializing cgroup subsys freezer
[42949373.250000] CPU: Testing write buffer coherency: ok
[42949373.250000] Calibrating local timer... 1.99MHz.
[42949373.310000] CPU1: Booted secondary processor
[42949373.310000] Calibrating delay loop... 1992.29 BogoMIPS (lpj=9961472)
[42949373.580000] Brought up 2 CPUs
[42949373.580000] SMP: Total of 2 processors activated (3991.14 BogoMIPS).
[42949373.580000] net_namespace: 312 bytes
[42949373.580000] NET: Registered protocol family 16
[42949373.580000] NVRM Got shmoo boot argument (at 0xdc810004)
[42949373.580000] NVRM corner (0, 1)
[42949373.580000] NVRM CLOCKS: PLLX0:      1000000 Khz
[42949373.580000] NVRM CLOCKS: PLLM0:      666000 Khz
[42949373.580000] NVRM CLOCKS: PLLC0:      600000 Khz
[42949373.580000] NVRM CLOCKS: PLLP0:      216000 Khz
[42949373.580000] NVRM CLOCKS: PLLA0:      11289 Khz
[42949373.580000] NVRM CLOCKS: CPU:        1000000 Khz
[42949373.580000] NVRM CLOCKS: AVP:        240000 Khz
[42949373.580000] NVRM CLOCKS: System Bus: 240000 Khz
[42949373.580000] NVRM CLOCKS: Memory Controller: 333000
[42949373.580000] NVRM CLOCKS: External Memory Controller: 666000
[42949373.940000] ADJUSTED CLOCKS:
[42949373.940000] MC clock is set to 333000 KHz
[42949373.940000] EMC clock is set to 666000 KHz (DDR clock is at 333000 KHz)
[42949373.940000] PLLX0 clock is set to 1000000 KHz
[42949373.940000] PLLC0 clock is set to 600000 KHz
[42949373.940000] CPU clock is set to 1000000 KHz
[42949373.940000] System and AVP clock is set to 240000 KHz
[42949373.940000] GraphicsHost clock is set to 111000 KHz
[42949373.940000] 3D clock is set to 111000 KHz
[42949373.940000] 2D clock is set to 111000 KHz
[42949373.940000] Epp clock is set to 111000 KHz
[42949373.940000] Mpe clock is set to 111000 KHz
[42949373.940000] Vde clock is set to 240000 KHz
[42949373.970000] PL310/L2C-310 cache controller enabled
[42949373.970000] Irq value = 390
[42949373.970000] Irq value = 391
[42949373.970000] Irq value = 392
[42949373.970000] Irq value = 393
[42949373.970000] Irq value = 394
[42949373.970000] Irq value = 395
[42949373.970000] Irq value = 396
[42949373.980000] bio: create slab <bio-0> at 0
[42949373.980000] SCSI subsystem initialized
[42949373.980000] usbcore: registered new interface driver usbfs
[42949373.980000] usbcore: registered new interface driver hub
[42949373.980000] usbcore: registered new device driver usb
[42949374.010000] NET: Registered protocol family 2
[42949374.130000] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[42949374.130000] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[42949374.130000] TCP bind hash table entries: 16384 (order: 5, 196608 bytes)
[42949374.130000] TCP: Hash tables configured (established 16384 bind 16384)
[42949374.130000] TCP reno registered
[42949374.160000] NET: Registered protocol family 1
[42949374.160000] Unpacking initramfs... done
[42949374.170000] Freeing initrd memory: 156K
[42949374.170000] tegra_iovmm_register: added iovmm-gart
[42949374.170000] nvrm_init called
[42949374.170000] nvrm probe
[42949374.170000] Bluetooth power OFF
[42949374.190000] Bluetooth power ON
[42949374.200000] ashmem: initialized
[42949374.210000] io scheduler noop registered
[42949374.210000] io scheduler anticipatory registered
[42949374.210000] io scheduler deadline registered
[42949374.210000] io scheduler cfq registered (default)
[42949374.210000] nvtegrafb: base address: dcc00000
[42949374.210000] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
[42949374.220000] serial8250.0: ttyS0 at MMIO 0x70006000 (irq = 68) is a XScale
[42949374.220000] console [ttyS0] enabled
[42949374.700000] tegra_uart tegra_uart.2: Registered UART port ttyHS2
[42949374.700000] Initialized tegra uart driver
[42949374.710000] usbcore: registered new interface driver cdc_ether
[42949374.710000] usbcore: registered new interface driver smsc9500
[42949374.720000] usbcore: registered new interface driver cdc_subset
[42949374.730000] Linux video capture interface: v2.00
[42949374.730000] usbcore: registered new interface driver uvcvideo
[42949374.740000] USB Video Class driver (v0.1.0)
[42949374.740000] Driver 'sd' needs updating - please use bus_type methods
[42949374.750000] Driver 'sr' needs updating - please use bus_type methods
[42949374.760000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[42949374.800000] tegra-ehci tegra-ehci.1: Tegra Ehci host controller
[42949374.800000] tegra-ehci tegra-ehci.1: new USB bus registered, assigned bus number 1
[42949374.840000] tegra-ehci tegra-ehci.1: irq 53, io base 0xc5004000
[42949374.860000] tegra-ehci tegra-ehci.1: USB 2.0 started, EHCI 1.00
[42949374.860000] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[42949374.870000] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[42949374.880000] usb usb1: Product: Tegra Ehci host controller
[42949374.880000] usb usb1: Manufacturer: Linux 2.6.29-arm2-svn1996 ehci_hcd
[42949374.890000] usb usb1: SerialNumber: tegra-ehci.1
[42949374.890000] usb usb1: configuration #1 chosen from 1 choice
[42949374.900000] hub 1-0:1.0: USB hub found
[42949374.900000] hub 1-0:1.0: 1 port detected
[42949374.910000] tegra-ehci tegra-ehci.2: Tegra Ehci host controller
[42949374.920000] tegra-ehci tegra-ehci.2: new USB bus registered, assigned bus number 2
[42949374.960000] tegra-ehci tegra-ehci.2: irq 129, io base 0xc5008000
[42949374.990000] tegra-ehci tegra-ehci.2: USB 2.0 started, EHCI 1.00
[42949375.000000] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[42949375.010000] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[42949375.010000] usb usb2: Product: Tegra Ehci host controller
[42949375.020000] usb usb2: Manufacturer: Linux 2.6.29-arm2-svn1996 ehci_hcd
[42949375.030000] usb usb2: SerialNumber: tegra-ehci.2
[42949375.030000] usb usb2: configuration #1 chosen from 1 choice
[42949375.040000] hub 2-0:1.0: USB hub found
[42949375.040000] hub 2-0:1.0: 1 port detected
[42949375.050000] usbcore: registered new interface driver cdc_acm
[42949375.050000] cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters
[42949375.060000] usbcore: registered new interface driver cdc_wdm
[42949375.070000] Initializing USB Mass Storage driver...
[42949375.070000] usbcore: registered new interface driver usb-storage
[42949375.080000] USB Mass Storage support registered.
[42949375.080000] Tegra High-Speed USB SOC Device Controller driver (Apr 20, 2007)
[42949375.100000] mice: PS/2 mouse device common for all mice
[42949375.100000] 
[42949375.100000] I2C Slave is *New*<6>input: nvec keyboard as /devices/virtual/input/input0
[42949375.250000] usb 1-1: new high speed USB device using tegra-ehci and address 2
[42949375.290000] usb 1-1: New USB device found, idVendor=0424, idProduct=2512
[42949375.300000] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[42949375.310000] usb 1-1: configuration #1 chosen from 1 choice
[42949375.310000] hub 1-1:1.0: USB hub found
[42949375.320000] hub 1-1:1.0: 2 ports detected
[42949375.440000] usb 2-1: new high speed USB device using tegra-ehci and address 2
[42949375.480000] usb 2-1: New USB device found, idVendor=0424, idProduct=2513
[42949375.480000] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[42949375.490000] usb 2-1: configuration #1 chosen from 1 choice
[42949375.500000] hub 2-1:1.0: USB hub found
[42949375.500000] hub 2-1:1.0: 3 ports detected
[42949375.600000] usb 1-1.1: new high speed USB device using tegra-ehci and address 3
[42949375.660000] usb 1-1.1: New USB device found, idVendor=0db0, idProduct=3871
[42949375.670000] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[42949375.680000] usb 1-1.1: Product: 802.11 n WLAN
[42949375.680000] usb 1-1.1: Manufacturer: Ralink
[42949375.690000] usb 1-1.1: SerialNumber: 1.0
[42949375.690000] usb 1-1.1: configuration #1 chosen from 1 choice
[42949375.790000] usb 1-1.2: new full speed USB device using tegra-ehci and address 4
[42949375.930000] usb 1-1.2: New USB device found, idVendor=0db0, idProduct=a871
[42949375.930000] usb 1-1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[42949375.940000] usb 1-1.2: configuration #1 chosen from 1 choice
[42949376.040000] usb 2-1.2: new high speed USB device using tegra-ehci and address 3
[42949376.050000] input: nvec mouse as /devices/virtual/input/input1
[42949376.100000] usb 2-1.2: New USB device found, idVendor=0bda, idProduct=58f2
[42949376.110000] usb 2-1.2: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[42949376.110000] usb 2-1.2: Product: USB Camera
[42949376.120000] usb 2-1.2: Manufacturer: Generic
[42949376.120000] NvEc mouse driver: registered NVEC mouse driver
[42949376.130000] usb 2-1.2: SerialNumber: 200901010001
[42949376.130000] usb 2-1.2: configuration #1 chosen from 1 choice
[42949376.140000] tegra_rtc tegra_rtc: rtc core: registered tegra_rtc as rtc0
[42949376.150000] tegra_i2c_probe
[42949376.150000] tegra_i2c_probe
[42949376.160000] tegra_i2c_probe
[42949376.160000] tegra_i2c_probe
[42949376.160000] uvcvideo: Found UVC 1.00 device USB Camera (0bda:58f2)
[42949376.180000] 	BATTERY: polling battery information! --->>>
[42949376.180000] sdhci: Secure Digital Host Controller Interface driver
[42949376.190000] sdhci: Copyright(c) Pierre Ossman
[42949376.190000] input: USB Camera as /devices/platform/tegra-ehci.2/usb2/2-1/2-1.2/2-1.2:1.0/input/input2
[42949376.210000] mmc0: Invalid maximum block size, assuming 512 bytes
[42949376.210000] mmc0: SDHCI controller on tegra [tegra-sdhci.3] using ADMA
[42949376.220000] tegra-sdhci tegra-sdhci.3: tegra_sdhci_probe: irq(63) io(0xfec00600) phys(0xc8000600)<4>mmc1: Invalid maximum block size, assuming 512 bytes
[42949376.240000] mmc1: SDHCI controller on tegra [tegra-sdhci.0] using ADMA
[42949376.240000] tegra-sdhci tegra-sdhci.0: tegra_sdhci_probe: irq(46) io(0xfec00000) phys(0xc8000000)<6>usbcore: registered new interface driver usbhid
[42949376.260000] usbhid: v2.6:USB HID core driver
[42949376.260000] logger: created 64K log 'log_main'
[42949376.270000] logger: created 256K log 'log_events'
[42949376.280000] logger: created 64K log 'log_radio'
[42949376.290000] input: nvec ec_event as /devices/virtual/input/input3
[42949376.320000] mmc0: new MMC card at address 0001
[42949376.320000] mmcblk0: mmc0:0001 SEM16G 14.8 GiB 
[42949376.330000]  mmcblk0: p1 p2 p3 p4 < p5 p6 >
[42949376.340000] test_program 0.1 initialised, current version = 01.20.00, Project number: F9
[42949376.350000] TCP cubic registered
[42949376.350000] NET: Registered protocol family 17
[42949376.350000] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 1
[42949376.360000] tegra_rtc tegra_rtc: setting system clock to 2009-01-01 00:00:00 UTC (1230768000)
[42949376.370000] Freeing init memory: 128K
[42949376.440000] init: cannot open '/initlogo.rle'
[42949376.520000] init: try to mount /dev/block/mmcblk0p1 on 1230768000.653004...
[42949376.520000] init: after mount /dev/block/mmcblk0p1 on 1230768000.660241...
[42949376.530000] kjournald starting.  Commit interval 5 seconds
[42949376.540000] EXT3 FS on mmcblk0p1, internal journal
[42949376.550000] EXT3-fs: mounted filesystem with ordered data mode.
[42949376.570000] init: try to mount /dev/block/mmcblk0p5 on 1230768000.708218...
[42949376.580000] init: after mount /dev/block/mmcblk0p5 on 1230768000.715471...
[42949376.590000] kjournald starting.  Commit interval 5 seconds
[42949376.590000] EXT3 FS on mmcblk0p5, internal journal
[42949376.600000] EXT3-fs: recovery complete.
[42949376.600000] EXT3-fs: mounted filesystem with ordered data mode.
[42949376.620000] init: try to mount /dev/block/mmcblk0p2 on 1230768000.752934...
[42949376.620000] init: after mount /dev/block/mmcblk0p2 on 1230768000.760174...
[42949376.630000] kjournald starting.  Commit interval 5 seconds
[42949376.640000] EXT3 FS on mmcblk0p2, internal journal
[42949376.650000] EXT3-fs: recovery complete.
[42949376.650000] EXT3-fs: mounted filesystem with ordered data mode.
[42949376.660000] init: try to mount /dev/block/mmcblk0p3 on 1230768000.794337...
[42949376.660000] init: after mount /dev/block/mmcblk0p3 on 1230768000.801568...
[42949376.670000] kjournald starting.  Commit interval 5 seconds
[42949376.680000] EXT3 FS on mmcblk0p3, internal journal
[42949376.690000] EXT3-fs: recovery complete.
[42949376.690000] EXT3-fs: mounted filesystem with ordered data mode.
[42949376.750000] android init
[42949376.750000] android_probe pdata: c041ca00
[42949376.760000] android_bind
[42949376.760000] mass_storage_function_add
[42949376.760000] android_usb gadget: Number of LUNs=1
[42949376.770000] adb_function_add
[42949376.770000] Gadget Android: controller 'tegra-udc' not recognized
[42949376.780000] android_usb gadget: android_usb ready
[42949376.780000] tegra-udc: bind to driver android_usb
[42949377.650000] rt3070sta: module license 'RALINK' taints kernel.
[42949377.780000] init: cannot find '/system/bin/playmp3', disabling 'bootsound'
[42949377.790000] init: cannot find '/system/etc/install-recovery.sh', disabling 'flash_recovery'
[42949377.820000] init: cannot find '/system/bin/abtfilt', disabling 'abtfilt'
sh: can't access tty; job control turned off
# [42949378.090000] BT_USB: initializing
[42949378.100000] csr_bt_usb: Attached to the device VID: 0DB0, PID: A871
[42949378.110000] Device class: 00, device subclass: 00, device protocol: 00
[42949378.120000] Local timer scaling factor 2097, shift 24
[42949378.120000] Interface class: 00, interface subclass: 00, interface protocol: 00
[42949378.120000] bt_usb0: probing interfaces
[42949378.120000] bt_usb0: warning: DFU interface missing.
[42949378.120000] bt_usb0: INTR in int 1 mps 257
[42949378.120000] bt_usb0: BULK out int 1 mps 64
[42949378.120000] bt_usb0: BULK in int 1 mps 64
[42949378.120000] bt_usb0: ISOC out int 1 mps 33
[42949378.160000] Loading nvrm_gpu.ko.
[42949378.160000] Loading nvrm_gpu.ko SUCCESS.
[42949378.170000] bt_usb0: ISOC in int 1 mps 33
[42949378.170000] DTT: T = 44, Range = 1 (-64 : 60)
[42949378.180000] usbcore: registered new interface driver csr_usb
[42949378.190000] csr_usb: CSR USB driver registered
[42949378.190000] nvrm_gpu first open (init channel)
[42949378.190000] Initializing nvrm_gpu.ko channel.
[42949378.190000] Initialized  nvrm_gpu.ko channel.
[42949378.330000] NvRmIoctls_NvRmFbControl: deprecated 
HDMI --> nvdispmgr_hotplug.c : test by wing 
HDMI --> nvdispmgr_hotplug.c : HotPlugDebounceThread(), thread start 
HDMI --> nvdispmgr_hotplug.c : NvDispMgrPrivInitializeGpioHotplug()
HDMI --> nvdispmgr_hotplug.c : NvDispMgrHotPlugReadPins()
HDMI --> nvdispmgr_hotplug.c : NvDispMgrHotPlugReadPins(), Pin State is Low
HDMI --> nvdispmgr_hotplug.c : NvDispMgrPrivInitializeGpioHotplug() 0
[42949378.920000] Get 0 bytes responsed from EC
Set Speaker Mute On.
[42949379.080000] Get 0 bytes responsed from EC
Set Speaker Mute On.
[42949379.230000] Get 0 bytes responsed from EC
Set Speaker Mute On.
[42949379.280000] nvrm_notifier_store: nvrm_daemon=774
[42949379.290000] nvrm_notifier_show: blocking
NvGrFbDevOpen: Opened fb0 on disp 0 size 1024x600 format 1 rate 60.000000[42949381.030000] bt_usb0: went to suspend (PM message: 0x0402)
[42949381.030000] bt_usb0: already suspended
[42949381.470000] input: AVRCP as /devices/virtual/input/input4
[42949381.640000] bt_usb0: resume
[42949381.640000] bt_usb0: not in suspend mode
[42949381.650000] csr_usb: bt_usb0: disabling power-save mode (cnt: 1)
[42949381.650000] csr_usb: bt_usb0: disabling power-save mode (cnt: 1)
[42949381.660000] csr_usb: Tx CTRL completion error, status: -32
[42949381.750000] usb 1-1.2: USB disconnect, address 4
[42949382.900000] warning: `zygote' uses 32-bit capabilities (legacy support in use)
[42949383.770000] bt_usb0: device removed
NVRM_DAEMON(436): client process closed connection
[42949384.040000] usb 1-1.2: new full speed USB device using tegra-ehci and address 5
[42949384.160000] usb 1-1.2: New USB device found, idVendor=0db0, idProduct=a871
[42949384.170000] usb 1-1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[42949384.180000] usb 1-1.2: configuration #1 chosen from 1 choice
[42949384.190000] csr_bt_usb: Attached to the device VID: 0DB0, PID: A871
[42949384.200000] Device class: 00, device subclass: 00, device protocol: 00
[42949384.210000] Interface class: 00, interface subclass: 00, interface protocol: 00
[42949384.220000] bt_usb0: probing interfaces
[42949384.220000] bt_usb0: warning: DFU interface missing.
[42949384.230000] bt_usb0: INTR in int 1 mps 257
[42949384.230000] bt_usb0: BULK out int 1 mps 64
[42949384.240000] bt_usb0: BULK in int 1 mps 64
[42949384.240000] bt_usb0: ISOC out int 1 mps 33
[42949384.250000] bt_usb0: ISOC in int 1 mps 33
[42949384.490000] csr_usb: bt_usb0: enabling power-save mode (cnt: 0)
[42949386.750000] DFS requested CPU1 OFF
[42949387.570000] request_suspend_state: wakeup (3->0) at 14617999338 (2009-01-01 00:00:11.708476118 UTC)
[42949390.300000] DFS requested CPU1 ON
[42949390.350000] CPU1: Booted secondary processor
[42949390.350000] Calibrating delay loop (skipped) preset value.. 1998.84 BogoMIPS (lpj=9994240)
[42949394.720000] DFS requested CPU1 OFF