Last active
June 21, 2024 09:48
-
-
Save noone2k/2ddea4c9bf116aaaefb8626b064d9a41 to your computer and use it in GitHub Desktop.
bc2500 info/control with esphome
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| esphome: | |
| name: bc2500-ble-idf | |
| friendly_name: bc2500-ble-idf | |
| esp32: | |
| board: az-delivery-devkit-v4 | |
| framework: | |
| type: esp-idf | |
| sdkconfig_options: | |
| CONFIG_FREERTOS_UNICORE: y | |
| advanced: | |
| ignore_efuse_mac_crc: true | |
| # Enable logging | |
| logger: | |
| # level: INFO | |
| # level: DEBUG | |
| # baud_rate: 0 | |
| ota: | |
| password: !secret ota_password | |
| wifi: | |
| ssid: !secret wifi_ssid | |
| password: !secret wifi_password | |
| reboot_timeout: 0s | |
| fast_connect: True | |
| # Enable fallback hotspot (captive portal) in case wifi connection fails | |
| ap: | |
| ssid: "Bc2500-Ble Fallback Hotspot" | |
| web_server: | |
| port: 80 | |
| local: true | |
| js_include: "./v2/www.js" | |
| js_url: "" | |
| version: 2 | |
| captive_portal: | |
| mqtt: | |
| id: mqtt_client | |
| broker: !secret mqtt_broker | |
| port: !secret mqtt_port | |
| discovery: False | |
| reboot_timeout: 0s | |
| topic_prefix: b2500 | |
| log_topic: b2500/debug | |
| time: | |
| - platform: sntp | |
| id: sntp_time | |
| on_time: | |
| # Every 10 seconds | |
| - seconds: /10 | |
| then: | |
| - script.execute: ble_process | |
| - script.wait: ble_process | |
| #- script.execute: power_zero | |
| #- button.press: query_info3 | |
| globals: | |
| - id: ble_1_connected | |
| type: bool | |
| initial_value: '0' | |
| - id: ble_1_initialized | |
| type: bool | |
| initial_value: '0' | |
| - id: ble_2_connected | |
| type: bool | |
| initial_value: '0' | |
| - id: ble_2_initialized | |
| type: bool | |
| initial_value: '0' | |
| - id: cmd30_xor_last_1 | |
| type: int | |
| initial_value: '0' | |
| - id: cmd30_xor_last_2 | |
| type: int | |
| initial_value: '0' | |
| - id: internal_console_dbg | |
| type: bool | |
| initial_value: '0' | |
| - id: internal_console_hexdump | |
| type: bool | |
| initial_value: '1' | |
| esp32_ble_tracker: | |
| ble_client: | |
| - mac_address: !secret hm2500_1_mac | |
| id: bc2500_1 | |
| on_connect: | |
| then: | |
| - globals.set: | |
| id: ble_1_connected | |
| value: '1' | |
| - binary_sensor.template.publish: | |
| id: bool_ble_ok_1 | |
| state: ON | |
| - script.execute: | |
| id: ble_set_time | |
| ble_device_nr: 1 | |
| - script.wait: ble_set_time | |
| - script.execute: | |
| id: ble_set_time | |
| ble_device_nr: 1 | |
| - script.wait: ble_set_time | |
| on_disconnect: | |
| then: | |
| - binary_sensor.template.publish: | |
| id: bool_ble_ok_1 | |
| state: OFF | |
| - globals.set: | |
| id: ble_1_connected | |
| value: '0' | |
| - globals.set: | |
| id: ble_1_initialized | |
| value: '0' | |
| - mac_address: !secret hm2500_2_mac | |
| id: bc2500_2 | |
| on_connect: | |
| then: | |
| - globals.set: | |
| id: ble_2_connected | |
| value: '1' | |
| - binary_sensor.template.publish: | |
| id: bool_ble_ok_2 | |
| state: ON | |
| - script.execute: | |
| id: ble_set_time | |
| ble_device_nr: 2 | |
| - script.wait: ble_set_time | |
| - script.execute: | |
| id: ble_set_time | |
| ble_device_nr: 2 | |
| - script.wait: ble_set_time | |
| on_disconnect: | |
| then: | |
| - binary_sensor.template.publish: | |
| id: bool_ble_ok_2 | |
| state: OFF | |
| - globals.set: | |
| id: ble_2_connected | |
| value: '0' | |
| - globals.set: | |
| id: ble_2_initialized | |
| value: '0' | |
| button: | |
| - platform: restart | |
| id: controller_restart | |
| name: "Restart Controller" | |
| number: | |
| - platform: template | |
| name: "D1-52: Entladeschwelle" | |
| id: sensor_discharge_treshold_1 | |
| state_topic: b2500/1/battery/discharge_treshold | |
| command_topic: b2500/1/battery/discharge_treshold/set | |
| optimistic: True | |
| min_value: 1 | |
| max_value: 500 | |
| step: 1 | |
| restore_value: True | |
| on_value: | |
| - script.execute: | |
| id: ble_set_discharge_treshold | |
| ble_device_nr: 1 | |
| discharge: !lambda return x; | |
| - platform: template | |
| name: "D1-53: DOD" | |
| state_topic: b2500/1/battery/dod | |
| command_topic: b2500/1/battery/dod/set | |
| id: sensor_dod_1 | |
| optimistic: True | |
| min_value: 10 | |
| max_value: 100 | |
| step: 1 | |
| restore_value: True | |
| on_value: | |
| - script.execute: | |
| id: ble_set_dod | |
| ble_device_nr: 1 | |
| dod: !lambda return x; | |
| - platform: template | |
| name: "D2-52: Entladeschwelle" | |
| id: sensor_discharge_treshold_2 | |
| state_topic: b2500/2/battery/discharge_treshold | |
| command_topic: b2500/2/battery/discharge_treshold/set | |
| optimistic: True | |
| min_value: 1 | |
| max_value: 500 | |
| step: 1 | |
| restore_value: True | |
| on_value: | |
| - script.execute: | |
| id: ble_set_discharge_treshold | |
| ble_device_nr: 2 | |
| discharge: !lambda return x; | |
| - platform: template | |
| name: "D2-53: DOD" | |
| state_topic: b2500/2/battery/dod | |
| command_topic: b2500/2/battery/dod/set | |
| id: sensor_dod_2 | |
| optimistic: True | |
| min_value: 10 | |
| max_value: 100 | |
| step: 1 | |
| restore_value: True | |
| on_value: | |
| - script.execute: | |
| id: ble_set_dod | |
| ble_device_nr: 2 | |
| dod: !lambda return x; | |
| ### power zero | |
| - platform: template | |
| name: "MQTT: opendtu set limit" | |
| id: mqtt_opendtu_limit | |
| internal: False | |
| state_topic: !secret mqtt_opendtu_limit_cmd | |
| command_topic: !secret mqtt_opendtu_limit_state | |
| optimistic: True | |
| min_value: 1 | |
| max_value: 75 | |
| step: 1 | |
| restore_value: True | |
| - platform: template | |
| name: "MQTT: opendtu set limit max" | |
| id: mqtt_opendtu_limit_max | |
| internal: False | |
| optimistic: True | |
| min_value: 1 | |
| max_value: 75 | |
| step: 1 | |
| restore_value: True | |
| switch: | |
| - platform: template | |
| id: switch_powerout_1_1 | |
| name: "D1-01: Power Out 1" | |
| state_topic: b2500/1/power1/enabled | |
| command_topic: b2500/1/power1/enabled/set | |
| optimistic: True | |
| assumed_state: True | |
| on_turn_on: | |
| then: | |
| - switch.turn_on: switch_powerout_1_1 | |
| - script.execute: | |
| id: ble_powerout | |
| ble_device_nr: 1 | |
| on_turn_off: | |
| then: | |
| - switch.turn_off: switch_powerout_1_1 | |
| - script.execute: | |
| id: ble_powerout | |
| ble_device_nr: 1 | |
| - platform: template | |
| id: switch_powerout_1_2 | |
| name: "D1-02: Power Out 2" | |
| state_topic: b2500/1/power2/enabled | |
| command_topic: b2500/1/power2/enabled/set | |
| optimistic: True | |
| assumed_state: True | |
| on_turn_on: | |
| then: | |
| - switch.turn_on: switch_powerout_1_2 | |
| - script.execute: | |
| id: ble_powerout | |
| ble_device_nr: 1 | |
| on_turn_off: | |
| then: | |
| - switch.turn_off: switch_powerout_1_2 | |
| - script.execute: | |
| id: ble_powerout | |
| ble_device_nr: 1 | |
| - platform: template | |
| id: switch_powerout_2_1 | |
| name: "D2-01: Power Out 1" | |
| state_topic: b2500/2/power1/enabled | |
| command_topic: b2500/2/power1/enabled/set | |
| optimistic: True | |
| assumed_state: True | |
| on_turn_on: | |
| then: | |
| - script.execute: | |
| id: ble_powerout | |
| ble_device_nr: 2 | |
| on_turn_off: | |
| then: | |
| - script.execute: | |
| id: ble_powerout | |
| ble_device_nr: 2 | |
| - platform: template | |
| id: switch_powerout_2_2 | |
| name: "D2-02: Power Out 2" | |
| state_topic: b2500/2/power2/enabled | |
| command_topic: b2500/2/power2/enabled/set | |
| optimistic: True | |
| assumed_state: True | |
| on_turn_on: | |
| then: | |
| - script.execute: | |
| id: ble_powerout | |
| ble_device_nr: 2 | |
| on_turn_off: | |
| then: | |
| - script.execute: | |
| id: ble_powerout | |
| ble_device_nr: 2 | |
| - platform: template | |
| id: switch_pv2_passthrough_1 | |
| name: "D1-03: PV2 Passtrough" | |
| state_topic: b2500/1/pv2/passtrough | |
| command_topic: b2500/1/pv2/passtrough/set | |
| optimistic: True | |
| assumed_state: True | |
| on_turn_on: | |
| then: | |
| - script.execute: | |
| id: ble_passthrough | |
| ble_device_nr: 1 | |
| switch_cmd: 0 | |
| on_turn_off: | |
| then: | |
| - script.execute: | |
| id: ble_passthrough | |
| ble_device_nr: 1 | |
| switch_cmd: 1 | |
| - platform: template | |
| id: switch_pv2_passthrough_2 | |
| name: "D2-03: PV2 Passtrough" | |
| state_topic: b2500/2/pv2/passtrough | |
| command_topic: b2500/2/pv2/passtrough/set | |
| optimistic: True | |
| assumed_state: True | |
| on_turn_on: | |
| then: | |
| - script.execute: | |
| id: ble_passthrough | |
| ble_device_nr: 2 | |
| switch_cmd: 0 | |
| on_turn_off: | |
| then: | |
| - script.execute: | |
| id: ble_passthrough | |
| ble_device_nr: 2 | |
| switch_cmd: 1 | |
| - platform: template | |
| id: switch_debug_hexdump | |
| name: "INTERNAL:DEBUG HEXDUMP" | |
| optimistic: True | |
| #assumed_state: True | |
| - platform: template | |
| id: switch_opendtu_limit | |
| name: "MQTT: opendtu - zero power" | |
| optimistic: True | |
| #assumed_state: True | |
| text: | |
| - platform: template | |
| name: "A1-t01 - Device Type" | |
| id: txt_A01_1 | |
| state_topic: b2500/1/device/type | |
| optimistic: true | |
| max_length: 30 | |
| mode: text | |
| - platform: template | |
| name: "A1-t02 - Device ID" | |
| state_topic: b2500/1/device/id | |
| id: txt_A02_1 | |
| optimistic: true | |
| max_length: 30 | |
| mode: text | |
| - platform: template | |
| name: "A1-t03 - MAC" | |
| id: txt_A03_1 | |
| state_topic: b2500/1/device/ble_mac | |
| optimistic: true | |
| max_length: 30 | |
| mode: text | |
| - platform: template | |
| name: "A1-t04 - SSID" | |
| id: txt_A11_1 | |
| state_topic: b2500/1/device/wifi_ssid | |
| optimistic: true | |
| max_length: 30 | |
| mode: text | |
| - platform: template | |
| name: "A2-t01 - Device Type" | |
| id: txt_A01_2 | |
| state_topic: b2500/2/device/type | |
| optimistic: true | |
| max_length: 30 | |
| mode: text | |
| - platform: template | |
| name: "A2-t02 - Device ID" | |
| id: txt_A02_2 | |
| state_topic: b2500/2/device/id | |
| optimistic: true | |
| max_length: 30 | |
| mode: text | |
| - platform: template | |
| name: "A2-t03 - MAC" | |
| id: txt_A03_2 | |
| optimistic: true | |
| state_topic: b2500/2/device/ble_mac | |
| max_length: 30 | |
| mode: text | |
| - platform: template | |
| name: "A2-t04 - SSID" | |
| id: txt_A11_2 | |
| state_topic: b2500/2/device/wifi_ssid | |
| optimistic: true | |
| max_length: 30 | |
| mode: text | |
| - platform: template | |
| name: "A1-t56: Szene" | |
| id: txt_scene_1 | |
| state_topic: b2500/1/device/scene | |
| optimistic: true | |
| max_length: 32 | |
| mode: text | |
| - platform: template | |
| name: "A1-t57: Region" | |
| id: txt_region_1 | |
| state_topic: b2500/1/device/region | |
| optimistic: true | |
| max_length: 8 | |
| mode: text | |
| - platform: template | |
| name: "A2-t56: Szene" | |
| id: txt_scene_2 | |
| state_topic: b2500/2/device/scene | |
| optimistic: true | |
| max_length: 32 | |
| mode: text | |
| - platform: template | |
| name: "A2-t57: Region" | |
| id: txt_region_2 | |
| state_topic: b2500/2/device/region | |
| optimistic: true | |
| max_length: 8 | |
| mode: text | |
| binary_sensor: | |
| - platform: template | |
| name: "D1-i01: PV 1 - Aktiv" | |
| id: bool_pv_active_1_1 | |
| state_topic: b2500/1/pv1/active | |
| - platform: template | |
| name: "D1-i11: PV 2 - Aktiv" | |
| id: bool_pv_active_1_2 | |
| state_topic: b2500/1/pv2/active | |
| - platform: template | |
| name: "D1-i02: PV 1 - Transparent" | |
| id: bool_pv_transparent_1_1 | |
| state_topic: b2500/1/pv1/transparent | |
| - platform: template | |
| name: "D1-i11: PV 2 - Transparent" | |
| id: bool_pv_transparent_1_2 | |
| state_topic: b2500/1/pv2/transparent | |
| - platform: template | |
| name: "D1-i54: Wifi Connected (?)" | |
| id: bool_wifi_ok_1 | |
| state_topic: b2500/1/device/wifi_ok | |
| - platform: template | |
| name: "D1-i55: MQTT1 Connected" | |
| id: bool_mqtt1_ok_1 | |
| state_topic: b2500/1/device/mqtt_ok | |
| - platform: template | |
| name: "D1-i58: BLE Connected" | |
| id: bool_ble_ok_1 | |
| state_topic: b2500/1/device/ble_ok | |
| - platform: template | |
| name: "D1-i21: Ausgang 1 - Aktiv" | |
| id: bool_power_active_1_1 | |
| state_topic: b2500/1/power1/active | |
| - platform: template | |
| name: "D1-i31: Ausgang 2 - Aktiv" | |
| id: bool_power_active_1_2 | |
| state_topic: b2500/1/power2/active | |
| - platform: template | |
| name: "D1-i40: Erweiterung 1 - angeschlossen" | |
| id: bool_extern_connected_1_1 | |
| state_topic: b2500/1/extern1/connected | |
| - platform: template | |
| name: "D1-i41: Erweiterung 2 - angeschlossen" | |
| id: bool_extern_connected_1_2 | |
| state_topic: b2500/1/extern2/connected | |
| - platform: template | |
| name: "D2-i01: PV 1 - Aktiv" | |
| id: bool_pv_active_2_1 | |
| state_topic: b2500/2/pv1/active | |
| - platform: template | |
| name: "D2-i11: PV 2 - Aktiv" | |
| id: bool_pv_active_2_2 | |
| state_topic: b2500/2/pv2/active | |
| - platform: template | |
| name: "D2-i02: PV 1 - Transparent" | |
| id: bool_pv_transparent_2_1 | |
| state_topic: b2500/2/pv1/transparent | |
| - platform: template | |
| name: "D2-i12: PV 2 - Transparent" | |
| id: bool_pv_transparent_2_2 | |
| state_topic: b2500/2/pv2/transparent | |
| - platform: template | |
| name: "D2-i54: Wifi Connected (?)" | |
| id: bool_wifi_ok_2 | |
| state_topic: b2500/2/device/wifi_ok | |
| - platform: template | |
| name: "D2-i55: MQTT1 Connected" | |
| id: bool_mqtt1_ok_2 | |
| state_topic: b2500/2/device/mqtt_ok | |
| - platform: template | |
| name: "D2-i58: BLE Connected" | |
| id: bool_ble_ok_2 | |
| state_topic: b2500/2/device/ble_ok | |
| - platform: template | |
| name: "D2-i21: Ausgang 1 - Aktiv" | |
| id: bool_power_active_2_1 | |
| state_topic: b2500/2/power1/active | |
| - platform: template | |
| name: "D2-i31: Ausgang 2 - Aktiv" | |
| id: bool_power_active_2_2 | |
| state_topic: b2500/2/power2/active | |
| - platform: template | |
| name: "D2-i40: Erweiterung 1 - angeschlossen" | |
| id: bool_extern_connected_2_1 | |
| state_topic: b2500/2/extern1/connected | |
| - platform: template | |
| name: "D2-i41: Erweiterung 2 - angeschlossen" | |
| id: bool_extern_connected_2_2 | |
| state_topic: b2500/2/extern2/connected | |
| sensor: | |
| - platform: template | |
| name: "D1-i05: PV 1 - Leistung" | |
| id: sensor_pv_power_in_1_1 | |
| state_topic: b2500/1/pv1/power | |
| accuracy_decimals: 0 | |
| - platform: template | |
| name: "D1-i15: PV 2 - Leistung" | |
| id: sensor_pv_power_in_1_2 | |
| state_topic: b2500/1/pv2/power | |
| accuracy_decimals: 0 | |
| - platform: template | |
| name: "D1-i50: Füllstand der Batterie in Prozent" | |
| id: sensor_bat_remain_1 | |
| state_topic: b2500/1/battery/remaining_percent | |
| accuracy_decimals: 0 | |
| - platform: template | |
| name: "D1-i51: Füllstand der Batterie in Wh" | |
| id: sensor_bat_capacity_1 | |
| state_topic: b2500/1/battery/remaining_capacity | |
| accuracy_decimals: 0 | |
| - platform: template | |
| name: "D1-i25: Ausgang 1 - Leistung" | |
| id: sensor_power_out_1_1 | |
| state_topic: b2500/1/power1/power | |
| accuracy_decimals: 0 | |
| - platform: template | |
| name: "D1-i35: Ausgang 2 - Leistung" | |
| id: sensor_power_out_1_2 | |
| state_topic: b2500/1/power2/power | |
| accuracy_decimals: 0 | |
| - platform: template | |
| name: "A1-t59: Geräte Version" | |
| id: sensor_device_version_1 | |
| state_topic: b2500/1/device/fw_version | |
| accuracy_decimals: 2 | |
| - platform: template | |
| name: "D2-i05: PV 1 - Leistung" | |
| id: sensor_pv_power_in_2_1 | |
| state_topic: b2500/2/pv1/power | |
| accuracy_decimals: 0 | |
| - platform: template | |
| name: "D2-i15: PV 2 - Leistung" | |
| id: sensor_pv_power_in_2_2 | |
| state_topic: b2500/2/pv2/power | |
| accuracy_decimals: 0 | |
| - platform: template | |
| name: "D2-i50: Füllstand der Batterie in Prozent" | |
| id: sensor_bat_remain_2 | |
| state_topic: b2500/2/battery/remaining_percent | |
| accuracy_decimals: 0 | |
| - platform: template | |
| name: "D2-i51: Füllstand der Batterie in Wh" | |
| id: sensor_bat_capacity_2 | |
| state_topic: b2500/2/battery/remaining_capacity | |
| accuracy_decimals: 0 | |
| - platform: template | |
| name: "D2-i25: Ausgang 1 - Leistung " | |
| id: sensor_power_out_2_1 | |
| state_topic: b2500/2/power1/power | |
| accuracy_decimals: 0 | |
| - platform: template | |
| name: "D2-i35: Ausgang 2 - Leistung " | |
| id: sensor_power_out_2_2 | |
| state_topic: b2500/2/power2/power | |
| accuracy_decimals: 0 | |
| - platform: template | |
| name: "A2-t59: Geräte Version" | |
| id: sensor_device_version_2 | |
| state_topic: b2500/2/device/fw_version | |
| accuracy_decimals: 2 | |
| - platform: ble_client | |
| ble_client_id: bc2500_1 | |
| internal: True | |
| type: characteristic | |
| name: "infoX2a" | |
| id: infoX2a | |
| service_uuid: 'ff00' | |
| characteristic_uuid: 'ff02' | |
| notify: True | |
| lambda: |- | |
| std::vector<char> tData; | |
| for (auto b : x) { tData.push_back(b); } | |
| id(ble_notify_parse).execute(1,tData); | |
| return (float)x[0]; | |
| - platform: ble_client | |
| ble_client_id: bc2500_2 | |
| internal: True | |
| type: characteristic | |
| name: "infoX2b" | |
| id: infoX2b | |
| service_uuid: 'ff00' | |
| characteristic_uuid: 'ff02' | |
| notify: True | |
| lambda: |- | |
| std::vector<char> tData; | |
| for (auto b : x) { tData.push_back(b); } | |
| id(ble_notify_parse).execute(2,tData); | |
| return (float)x[0]; | |
| ### power zero - mqtt grid power sensor ( any who publish the grid power to mqtt - defined in secrets,yaml ) | |
| - platform: mqtt_subscribe | |
| name: "MQTT: Grid Power" | |
| id: mqtt_grid_power | |
| topic: !secret mqtt_grid_power | |
| on_value: | |
| then: | |
| - script.execute: power_zero | |
| ###test | |
| - platform: ble_client | |
| ble_client_id: bc2500_1 | |
| internal: True | |
| type: characteristic | |
| name: "infoX6a" | |
| id: infoX6a | |
| service_uuid: 'ff00' | |
| characteristic_uuid: 'ff06' | |
| notify: True | |
| lambda: |- | |
| std::vector<char> tData; | |
| for (auto b : x) { tData.push_back(b); } | |
| id(ble_notify_parse_test).execute(1,tData); | |
| return (float)x[0]; | |
| - platform: ble_client | |
| ble_client_id: bc2500_2 | |
| internal: True | |
| type: characteristic | |
| name: "infoX6b" | |
| id: infoX6b | |
| service_uuid: 'ff00' | |
| characteristic_uuid: 'ff06' | |
| notify: True | |
| lambda: |- | |
| std::vector<char> tData; | |
| for (auto b : x) { tData.push_back(b); } | |
| id(ble_notify_parse_test).execute(1,tData); | |
| return (float)x[0]; | |
| script: | |
| # ble communication | |
| # | |
| # action ( 00f1 ) | |
| # | |
| # head = 0x73 | |
| # length = len(paket) | |
| # cntl = 0x23 | |
| # cmd = 0x02 set Region 1Byte (0x00 = EU / 0x01 = China / 0x02 = Non-EU) | |
| # = 0x03 runtimeInfo 1Byte (0x01) | |
| # = 0x04 DeviceInfo 1Byte (0x01) | |
| # = 0x0B DOD 1Byte (0-100) | |
| # = 0x0C Entladeschwelle 2Byte (0-500) | |
| # = 0x0D PV2-Passtrough 1Byte (0x00 on / 0x01 off) | |
| # = 0x0E PowerOut 1Byte (0x00 1-2 off / 0x01 1 on / 0x02 2 on / 0x03 1-2 on) | |
| # | |
| # = 0x05 Wifi-Config xByte ( ssid<.,.>pwd ) | |
| # = 0x08 Wifi-State 1Byte (0x01) ???? | |
| # | |
| # q&d c&p - more details will be added, maybe ... | |
| # = 0x14 set AWS MQTT xByte ( url<.,.>Port ) .... | |
| # = 0x60 set MQTT Certs xByte ( 0x00 = client.key / 0x01 = client.crt / 0x02 = ca.crt + cert len ) | |
| # = 0x61 trans MQTT Certs xByte ( jeweils 128bytes des certs ) | |
| # = 0x62 end MQTT Certs xByte ( ) | |
| # | |
| # testing / notes | |
| # = 0x01 Debug ?!?! 1Byte (0x00 = off / 0x01 = on) - enables QBLEGATTSNOTIFY notify 1 / 81 ( entspricht ~ runtimeinfo ) | |
| # = 0x06 | |
| # = 0x07 | |
| # = 0x09 | |
| # = 0x0A | |
| # = 0x0E HW-RESET ????? / send before head 0XAA ( deactivate output ??? ) | |
| # = 0x0F new in fw 131 1Byte ( 0x01 ) | |
| # | |
| # = 0x30 found in logs ... unknown parm 0x01 ???? answers since fw 131 | |
| # = 0x14 maybe not for mqtt ... set localtime ??? for auth/certs/challenge requests ????? ( query/set wifi depends ????) | |
| # | |
| # data = xx xx xx xx xx xx .... / depends on cmd | |
| # crc = xor len(paket) - 1 | |
| # | |
| # | |
| # responses ( ff02 ): | |
| # | |
| # head = 0x73 | |
| # length = len(paket) | |
| # cntl = 0x23 | |
| # cmd = cmd | |
| # data = xx xx xx xx xx .... | |
| # | |
| # | |
| # | |
| ################ maybe direct for arm | |
| # send ( ff01 ) | |
| # | |
| # head1 = 0xAA | |
| # head2(?) = 0x55 ( not length ?!?!? ) | |
| # cmd = 1x / 2x / 3x ( flash - 30 "open"/ 31 - write / 32 "close" ) / 5x | |
| # data = xx xx xx xx xx .... | |
| # crc = xor len(paket) -1 | |
| # | |
| ################ maybe direct for bms | |
| # send/receive ( ff06 ) | |
| # | |
| # head = 0xAA | |
| # len = 0x05/0x03 | |
| # data = xx xx xxx ( xx xx ) | |
| # crc = x1 + x2 + ... + xn | |
| # | |
| # | |
| # | |
| # -> aa 05 01 00 01 01 00 08 | |
| # <- aa 01 00 01 | |
| # | |
| # -> aa 05 01 00 01 00 00 07 | |
| # <- aa 01 00 01 | |
| # | |
| - id: ble_command_simple | |
| parameters: | |
| ble_device_nr: int | |
| ble_cmd: int | |
| ble_cmd_parm: int | |
| then: | |
| - logger.log: | |
| format: "ble command parse: %i [%i] %i" | |
| args: [ 'ble_device_nr','ble_cmd','ble_cmd_parm' ] | |
| - if: | |
| condition: | |
| lambda: 'return (ble_device_nr == 1);' | |
| then: | |
| - ble_client.ble_write: | |
| id: bc2500_1 | |
| #service_uuid: 'ff00' | |
| #characteristic_uuid: 'ff01' | |
| service_uuid: 0000ff00-0000-1000-8000-00805f9b34fb | |
| characteristic_uuid: 0000ff01-0000-1000-8000-00805f9b34fb | |
| value: !lambda |- | |
| std::vector<unsigned char> rdat1{ 0x73,0x06,0x23,(unsigned char)ble_cmd}; | |
| if (ble_cmd == 0x0C) { | |
| rdat1.push_back((uint8_t)((ble_cmd_parm >> 0) & 0xFF)); | |
| rdat1.push_back((uint8_t)((ble_cmd_parm >> 8) & 0xFF)); | |
| } else { | |
| rdat1.push_back((unsigned char)ble_cmd_parm); | |
| } | |
| int rlen = rdat1.size(); | |
| rdat1.at(1) = rlen+1; | |
| int rxor = 0; | |
| for (int i=0;i<rlen;i++) { | |
| rxor = rxor ^ rdat1[i]; | |
| } | |
| rdat1.push_back(rxor); | |
| if (id(internal_console_dbg)) { | |
| for (auto b : rdat1) { | |
| ESP_LOGD("COMMAND", "%x - %i - %c", b,b,b); | |
| } | |
| } | |
| return rdat1; | |
| - if: | |
| condition: | |
| lambda: 'return (ble_device_nr == 2);' | |
| then: | |
| - ble_client.ble_write: | |
| id: bc2500_2 | |
| service_uuid: 'ff00' | |
| characteristic_uuid: 'ff01' | |
| value: !lambda |- | |
| std::vector<unsigned char> rdat2{ 0x73,0x06,0x23,(unsigned char)ble_cmd}; | |
| if (ble_cmd == 0x0C) { | |
| rdat2.push_back((uint8_t)((ble_cmd_parm >> 0) & 0xFF)); | |
| rdat2.push_back((uint8_t)((ble_cmd_parm >> 8) & 0xFF)); | |
| } else { | |
| rdat2.push_back((unsigned char)ble_cmd_parm); | |
| } | |
| int rlen = rdat2.size(); | |
| rdat2.at(1) = rlen+1; | |
| int rxor = 0; | |
| for (int i=0;i<rlen;i++) { | |
| rxor = rxor ^ rdat2[i]; | |
| } | |
| rdat2.push_back(rxor); | |
| if (id(internal_console_dbg)) { | |
| for (auto b : rdat2) { | |
| ESP_LOGD("COMMAND", "%x - %i - %c", b,b,b); | |
| } | |
| } | |
| return rdat2; | |
| - id: ble_command_string | |
| parameters: | |
| ble_device_nr: int | |
| ble_cmd: int | |
| ble_cmd_parm: string | |
| then: | |
| - logger.log: | |
| format: "ble command parse: %i [%i]" | |
| args: [ 'ble_device_nr','ble_cmd'] | |
| - if: | |
| condition: | |
| lambda: 'return (ble_device_nr == 1);' | |
| then: | |
| - ble_client.ble_write: | |
| id: bc2500_1 | |
| #service_uuid: 'ff00' | |
| #characteristic_uuid: 'ff01' | |
| service_uuid: 0000ff00-0000-1000-8000-00805f9b34fb | |
| characteristic_uuid: 0000ff01-0000-1000-8000-00805f9b34fb | |
| value: !lambda |- | |
| std::vector<unsigned char> rdat1{ 0x73,0x06,0x23,(unsigned char)ble_cmd}; | |
| for (auto b : ble_cmd_parm) { | |
| rdat1.push_back((unsigned char)b); | |
| } | |
| int rlen = rdat1.size(); | |
| rdat1.at(1) = rlen+1; | |
| int rxor = 0; | |
| for (int i=0;i<rlen;i++) { | |
| rxor = rxor ^ rdat1[i]; | |
| } | |
| rdat1.push_back(rxor); | |
| if (id(internal_console_dbg)) { | |
| for (auto b : rdat1) { | |
| ESP_LOGD("COMMAND", "%x - %i - %c", b,b,b); | |
| } | |
| } | |
| return rdat1; | |
| - if: | |
| condition: | |
| lambda: 'return (ble_device_nr == 2);' | |
| then: | |
| - ble_client.ble_write: | |
| id: bc2500_2 | |
| service_uuid: 'ff00' | |
| characteristic_uuid: 'ff01' | |
| #service_uuid: 0000ff00-0000-1000-8000-00805f9b34fb | |
| #characteristic_uuid: 0000ff01-0000-1000-8000-00805f9b34fb | |
| value: !lambda |- | |
| std::vector<unsigned char> rdat2{ 0x73,0x06,0x23,(unsigned char)ble_cmd}; | |
| for (auto b : ble_cmd_parm) { | |
| rdat2.push_back((unsigned char)b); | |
| } | |
| int rlen = rdat2.size(); | |
| rdat2.at(1) = rlen+1; | |
| int rxor = 0; | |
| for (int i=0;i<rlen;i++) { | |
| rxor = rxor ^ rdat2[i]; | |
| } | |
| rdat2.push_back(rxor); | |
| if (id(internal_console_dbg)) { | |
| for (auto b : rdat2) { | |
| ESP_LOGD("COMMAND", "%x - %i - %c", b,b,b); | |
| } | |
| } | |
| return rdat2; | |
| - id: ble_set_time | |
| parameters: | |
| ble_device_nr: int | |
| then: | |
| - if: | |
| condition: | |
| lambda: 'return (ble_device_nr == 1);' | |
| then: | |
| - ble_client.ble_write: | |
| id: bc2500_1 | |
| #service_uuid: 'ff00' | |
| #characteristic_uuid: 'ff01' | |
| service_uuid: 0000ff00-0000-1000-8000-00805f9b34fb | |
| characteristic_uuid: 0000ff01-0000-1000-8000-00805f9b34fb | |
| value: !lambda |- | |
| std::vector<unsigned char> rdat1{ 0x73,0x0d,0x23,0x14, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3c, 0x00 }; | |
| auto time = id(sntp_time).now(); | |
| rdat1.at(4) = time.year - 1900; | |
| rdat1.at(5) = time.month; | |
| rdat1.at(6) = time.day_of_month; | |
| rdat1.at(7) = time.hour; | |
| rdat1.at(8) = time.minute; | |
| rdat1.at(9) = time.second + 1; | |
| int rlen = rdat1.size(); | |
| rdat1.at(1) = rlen+1; | |
| int rxor = 0; | |
| for (int i=0;i<rlen;i++) { | |
| rxor = rxor ^ rdat1[i]; | |
| } | |
| rdat1.push_back(rxor); | |
| if (id(internal_console_dbg)) { | |
| for (auto b : rdat1) { | |
| ESP_LOGD("COMMAND", "%x - %i - %c", b,b,b); | |
| } | |
| } | |
| return rdat1; | |
| - globals.set: | |
| id: ble_1_initialized | |
| value: '1' | |
| - if: | |
| condition: | |
| lambda: 'return (ble_device_nr == 2);' | |
| then: | |
| - ble_client.ble_write: | |
| id: bc2500_2 | |
| service_uuid: 'ff00' | |
| characteristic_uuid: 'ff01' | |
| #service_uuid: 0000ff00-0000-1000-8000-00805f9b34fb | |
| #characteristic_uuid: 0000ff01-0000-1000-8000-00805f9b34fb | |
| value: !lambda |- | |
| std::vector<unsigned char> rdat2{ 0x73,0x0d,0x23,0x14, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3c, 0x00 }; | |
| auto time = id(sntp_time).now(); | |
| rdat2.at(4) = time.year - 1900; | |
| rdat2.at(5) = time.month; | |
| rdat2.at(6) = time.day_of_month; | |
| rdat2.at(7) = time.hour; | |
| rdat2.at(8) = time.minute; | |
| rdat2.at(9) = time.second + 1; | |
| int rlen = rdat2.size(); | |
| rdat2.at(1) = rlen+1; | |
| int rxor = 0; | |
| for (int i=0;i<rlen;i++) { | |
| rxor = rxor ^ rdat2[i]; | |
| } | |
| rdat2.push_back(rxor); | |
| if (id(internal_console_dbg)) { | |
| for (auto b : rdat2) { | |
| ESP_LOGD("COMMAND", "%x - %i - %c", b,b,b); | |
| } | |
| } | |
| return rdat2; | |
| - globals.set: | |
| id: ble_2_initialized | |
| value: '1' | |
| - id: ble_command_raw_06 | |
| parameters: | |
| ble_device_nr: int | |
| ble_cmd_parm: char[] | |
| then: | |
| - logger.log: | |
| format: "ble command parse (raw): %i" | |
| args: [ 'ble_device_nr'] | |
| - if: | |
| condition: | |
| lambda: 'return (ble_device_nr == 1);' | |
| then: | |
| - ble_client.ble_write: | |
| id: bc2500_1 | |
| #service_uuid: 'ff00' | |
| #characteristic_uuid: 'ff06' | |
| service_uuid: 0000ff00-0000-1000-8000-00805f9b34fb | |
| characteristic_uuid: 0000ff06-0000-1000-8000-00805f9b34fb | |
| value: !lambda |- | |
| std::vector<unsigned char> rdat1; | |
| for (auto b : ble_cmd_parm) { | |
| rdat1.push_back((unsigned char)b); | |
| } | |
| /* | |
| int rlen = rdat1.size(); | |
| rdat1.at(1) = rlen+1; | |
| int rxor = 0; | |
| for (int i=0;i<rlen;i++) { | |
| rxor = rxor ^ rdat1[i]; | |
| } | |
| rdat1.push_back(rxor); | |
| */ | |
| //if (id(internal_console_dbg)) { | |
| for (auto b : rdat1) { | |
| ESP_LOGD("COMMAND raw", "%x - %i - %c", b,b,b); | |
| } | |
| //} | |
| return rdat1; | |
| - if: | |
| condition: | |
| lambda: 'return (ble_device_nr == 2);' | |
| then: | |
| - ble_client.ble_write: | |
| id: bc2500_2 | |
| #service_uuid: 'ff00' | |
| #characteristic_uuid: 'ff06' | |
| service_uuid: 0000ff00-0000-1000-8000-00805f9b34fb | |
| characteristic_uuid: 0000ff06-0000-1000-8000-00805f9b34fb | |
| value: !lambda |- | |
| std::vector<unsigned char> rdat2; | |
| for (auto b : ble_cmd_parm) { | |
| rdat2.push_back((unsigned char)b); | |
| } | |
| /* | |
| int rlen = rdat2.size(); | |
| rdat2.at(1) = rlen+1; | |
| int rxor = 0; | |
| for (int i=0;i<rlen;i++) { | |
| rxor = rxor ^ rdat2[i]; | |
| } | |
| rdat2.push_back(rxor); | |
| */ | |
| //if (id(internal_console_dbg)) { | |
| for (auto b : rdat2) { | |
| ESP_LOGD("COMMAND raw", "%x - %i - %c", b,b,b); | |
| } | |
| //} | |
| return rdat2; | |
| - id: ble_process | |
| then: | |
| - if: | |
| condition: | |
| - lambda: 'return (id(ble_1_connected) && id(ble_1_initialized));' | |
| then: | |
| - script.execute: | |
| id: ble_runtime_query | |
| ble_device_nr: 1 | |
| - script.wait: ble_runtime_query | |
| ### query cmd30 if firmware > 1.30 | |
| - if: | |
| condition: | |
| - lambda: 'return (id(sensor_device_version_1).state * 100 > 130);' | |
| then: | |
| - script.execute: | |
| id: ble_runtime_query30 | |
| ble_device_nr: 1 | |
| - script.wait: ble_runtime_query30 | |
| - script.execute: | |
| id: ble_runtime_query0F | |
| ble_device_nr: 1 | |
| - script.wait: ble_runtime_query0F | |
| ### query deviceinfo if empty | |
| - if: | |
| condition: | |
| - lambda: 'return (id(txt_A03_1).state == "");' | |
| then: | |
| - script.execute: | |
| id: ble_command_simple | |
| ble_device_nr: 1 | |
| ble_cmd: 0x04 | |
| ble_cmd_parm: 0x01 | |
| - script.wait: ble_command_simple | |
| - if: | |
| condition: | |
| - lambda: 'return (id(ble_2_connected) && id(ble_2_initialized));' | |
| then: | |
| - script.execute: | |
| id: ble_runtime_query | |
| ble_device_nr: 2 | |
| - script.wait: ble_runtime_query | |
| ### query cmd30 if firmware > 1.30 | |
| - if: | |
| condition: | |
| - lambda: 'return (id(sensor_device_version_2).state * 100 > 130);' | |
| then: | |
| - script.execute: | |
| id: ble_runtime_query30 | |
| ble_device_nr: 2 | |
| - script.wait: ble_runtime_query30 | |
| - script.execute: | |
| id: ble_runtime_query0F | |
| ble_device_nr: 2 | |
| - script.wait: ble_runtime_query0F | |
| ### query deviceinfo if empty | |
| - if: | |
| condition: | |
| - lambda: 'return (id(txt_A03_2).state == "");' | |
| then: | |
| - script.execute: | |
| id: ble_command_simple | |
| ble_device_nr: 2 | |
| ble_cmd: 0x04 | |
| ble_cmd_parm: 0x01 | |
| - script.wait: ble_command_simple | |
| - id: ble_runtime_query | |
| parameters: | |
| ble_device_nr: int | |
| then: | |
| - logger.log: | |
| format: "runtime query: %i" | |
| args: [ 'ble_device_nr' ] | |
| - script.execute: | |
| id: ble_command_simple | |
| ble_device_nr: !lambda return ble_device_nr; | |
| ble_cmd: 0x03 | |
| ble_cmd_parm: 0x01 | |
| - script.wait: ble_command_simple | |
| - id: ble_runtime_query30 | |
| parameters: | |
| ble_device_nr: int | |
| then: | |
| - logger.log: | |
| format: "runtime query 30: %i" | |
| args: [ 'ble_device_nr' ] | |
| - script.execute: | |
| id: ble_command_simple | |
| ble_device_nr: !lambda return ble_device_nr; | |
| ble_cmd: 0x30 | |
| ble_cmd_parm: 0x01 | |
| - script.wait: ble_command_simple | |
| - id: ble_runtime_query0F | |
| parameters: | |
| ble_device_nr: int | |
| then: | |
| - logger.log: | |
| format: "runtime query 0F: %i" | |
| args: [ 'ble_device_nr' ] | |
| - script.execute: | |
| id: ble_command_simple | |
| ble_device_nr: !lambda return ble_device_nr; | |
| ble_cmd: 0x0F | |
| ble_cmd_parm: 0x01 | |
| - script.wait: ble_command_simple | |
| - id: ble_powerout | |
| parameters: | |
| ble_device_nr: int | |
| then: | |
| - lambda: |- | |
| int ble_cmd_t = 0x00; | |
| if ( ble_device_nr == 1 ) { | |
| if ( ! id(switch_powerout_1_1).state && ! id(switch_powerout_1_2).state ) { ble_cmd_t = 0x00; } | |
| if ( id(switch_powerout_1_1).state && ! id(switch_powerout_1_2).state ) { ble_cmd_t = 0x01; } | |
| if ( ! id(switch_powerout_1_1).state && id(switch_powerout_1_2).state ) { ble_cmd_t = 0x02; } | |
| if ( id(switch_powerout_1_1).state && id(switch_powerout_1_2).state ) { ble_cmd_t = 0x03; } | |
| } | |
| if ( ble_device_nr == 2 ) { | |
| if ( ! id(switch_powerout_2_1).state && ! id(switch_powerout_2_2).state ) { ble_cmd_t = 0x00; } | |
| if ( id(switch_powerout_2_1).state && ! id(switch_powerout_2_2).state ) { ble_cmd_t = 0x01; } | |
| if ( ! id(switch_powerout_2_1).state && id(switch_powerout_2_2).state ) { ble_cmd_t = 0x02; } | |
| if ( id(switch_powerout_2_1).state && id(switch_powerout_2_2).state ) { ble_cmd_t = 0x03; } | |
| } | |
| id(ble_command_simple).execute(ble_device_nr,0x0E,ble_cmd_t); | |
| if (ble_cmd_t == 0x00) { ESP_LOGD("set_power_out", "Device %i - %s", ble_device_nr,"1 OFF / 2 OFF"); } | |
| if (ble_cmd_t == 0x01) { ESP_LOGD("set_power_out", "Device %i - %s", ble_device_nr,"1 ON / 2 OFF"); } | |
| if (ble_cmd_t == 0x02) { ESP_LOGD("set_power_out", "Device %i - %s", ble_device_nr,"1 OFF / 2 ON"); } | |
| if (ble_cmd_t == 0x03) { ESP_LOGD("set_power_out", "Device %i - %s", ble_device_nr,"1 ON / 2 ON"); } | |
| - id: ble_passthrough | |
| parameters: | |
| ble_device_nr: int | |
| switch_cmd: bool | |
| then: | |
| - logger.log: | |
| format: "PV2 Passthrough %i : %i" | |
| args: [ble_device_nr,switch_cmd] | |
| - script.execute: | |
| id: ble_command_simple | |
| ble_device_nr: !lambda return ble_device_nr; | |
| ble_cmd: 0x0D | |
| ble_cmd_parm: !lambda return switch_cmd; | |
| - id: ble_set_dod | |
| parameters: | |
| ble_device_nr: int | |
| dod: int | |
| then: | |
| - logger.log: | |
| format: "set DOD: %i" | |
| args: [ 'dod' ] | |
| - if: | |
| condition: | |
| lambda: 'return ( dod <= 100 && dod >= 10);' | |
| then: | |
| - script.execute: | |
| id: ble_command_simple | |
| ble_device_nr: !lambda return ble_device_nr; | |
| ble_cmd: 0x0B | |
| ble_cmd_parm: !lambda return dod; | |
| - id: ble_set_discharge_treshold | |
| parameters: | |
| ble_device_nr: int | |
| discharge: int | |
| then: | |
| - logger.log: | |
| format: "set discharge level: %i" | |
| args: [ 'discharge' ] | |
| - if: | |
| condition: | |
| lambda: 'return ( discharge <= 500 && discharge >= 1);' | |
| then: | |
| - script.execute: | |
| id: ble_command_simple | |
| ble_device_nr: !lambda return ble_device_nr; | |
| ble_cmd: 0x0C | |
| ble_cmd_parm: !lambda return discharge; | |
| - id: ble_notify_parse_test | |
| parameters: | |
| ble_device_nr: int | |
| x: char[] | |
| then: | |
| - logger.log: | |
| format: "runtime parse: %i" | |
| args: [ 'ble_device_nr' ] | |
| - lambda: |- | |
| //if (id(internal_console_dbg)) { | |
| ESP_LOGD("parse test", "x[3] = %i", x[3]); | |
| for (auto b : x) { | |
| ESP_LOGD("data test", "%.2x \t %i \t %c", b,b,b); | |
| } | |
| //} | |
| - id: ble_notify_parse | |
| parameters: | |
| ble_device_nr: int | |
| x: char[] | |
| then: | |
| - logger.log: | |
| format: "runtime parse: %i" | |
| args: [ 'ble_device_nr' ] | |
| - lambda: |- | |
| ESP_LOGD("notify_parse", "Device: %i", ble_device_nr); | |
| if (id(internal_console_dbg)) { | |
| ESP_LOGD("parse", "x[3] = %i", x[3]); | |
| for (auto b : x) { | |
| ESP_LOGD("data", "%.2x \t %i \t %c", b,b,b); | |
| } | |
| } | |
| if (id(switch_debug_hexdump).state == true) { | |
| ESP_LOG_BUFFER_HEXDUMP("hexdump", &x[0], x.size(), ESP_LOG_ERROR); | |
| } | |
| if ((std::count (x.begin(), x.end(), '_') == 16) || (std::count (x.begin(), x.begin() + 10, '_') == 3)) | |
| { | |
| ESP_LOGD("main", "Data: cmd 0x0F"); | |
| int pos = 0; | |
| int soc = 0; | |
| int t1 = 0; | |
| int t2 = 0; | |
| float cv = 0.0; | |
| float cmin = std::numeric_limits<float>::max(); | |
| float cmax = std::numeric_limits<float>::min(); | |
| float ct = 0.0; | |
| int found = -1; | |
| char delimiter = '_'; | |
| std::string xstr; | |
| std::vector<float> cellV; | |
| xstr.assign(x.begin(), x.end()); // copy values from vector into string xstr, deep copy | |
| xstr = xstr + delimiter; // append delimiter to xstr | |
| found = xstr.find(delimiter); // search for position of the first delimiter | |
| while (found != -1) // loop until no more delimiter found | |
| { | |
| if(pos == 0) soc = atoi( xstr.substr(0, found).c_str()); // pos 0 don't care | |
| if(pos == 1) t1 = atoi( xstr.substr(0, found).c_str()); // pos 1 get int value of temperature sensor 1 | |
| if(pos == 2) t2 = atoi( xstr.substr(0, found).c_str()); // pos 2 get int value of temperature sensor 2 | |
| if((pos >= 3) && (pos <= 16)) // pos 3-16 parse pos for the 14 cell voltages | |
| { | |
| ct = atof( xstr.substr(0, found).c_str()); // get float value of pos x | |
| cellV.push_back(ct); | |
| //ESP_LOGD("cell voltage", ct.c_str()); | |
| cv += ct; // add actual value to var cv | |
| if(ct > cmax) cmax = ct; // check for higher value as stored in cmax | |
| if(ct < cmin) cmin = ct; // check for lower value as stored in cmin | |
| } | |
| xstr.erase(xstr.begin(), xstr.begin() + found + 1); // remove parsed string part | |
| found = xstr.find(delimiter); // find next delimiter | |
| pos++; // increment pos | |
| } | |
| /* calculate SoC from cell voltages | |
| cell empty = 3.0 Volt = 0% SoC | |
| cell full = 3.5 Volt = 100% SoC | |
| */ | |
| // float soccalc = (cv/14000 - 3.0) * 200; | |
| float lowlimit = 3.0; // low voltage limit | |
| float highlimit = 3.5; // high voltage limit | |
| float soccalc = 100*((cv/14000) | |
| - highlimit)/(highlimit - lowlimit) + 100; // equation of line with two points (0,lowlimit) (100,highlimit) | |
| ESP_LOGD("cellVoltage","soc: %i, temp1: %i, temp2: %i",soc,t1,t2); | |
| ESP_LOGD("cellVoltage","cell01: %.f, cell 02: %.f, cell 03: %.f, cell 04: %.f", cellV[0], cellV[1], cellV[2], cellV[3]); | |
| ESP_LOGD("cellVoltage","cell05: %.f, cell 06: %.f, cell 07: %.f, cell 08: %.f", cellV[4], cellV[5], cellV[6], cellV[7]); | |
| ESP_LOGD("cellVoltage","cell09: %.f, cell 10: %.f, cell 11: %.f, cell 12: %.f", cellV[8], cellV[9], cellV[10], cellV[11]); | |
| ESP_LOGD("cellVoltage","cell13: %.f, cell 14: %.f", cellV[12], cellV[13]); | |
| char mtopic[48]; | |
| for (int i=0; i<14; i++) { | |
| snprintf(mtopic, 48,"b2500/%i/battery/cells/%02d/voltage",ble_device_nr,i+1); | |
| //ESP_LOGD("cellVoltageX","%s : %f", mtopic, cellV[i]); | |
| id(mqtt_client).publish(mtopic,to_string(cellV[i]/1000)); | |
| } | |
| snprintf(mtopic, 48,"b2500/%i/battery/cells/sum/voltage",ble_device_nr); | |
| id(mqtt_client).publish(mtopic,to_string(cv/1000)); | |
| snprintf(mtopic, 48,"b2500/%i/battery/cells/sum/cmin",ble_device_nr); | |
| id(mqtt_client).publish(mtopic,to_string(cmin/1000)); | |
| snprintf(mtopic, 48,"b2500/%i/battery/cells/sum/cmax",ble_device_nr); | |
| id(mqtt_client).publish(mtopic,to_string(cmax/1000)); | |
| snprintf(mtopic, 48,"b2500/%i/battery/cells/sum/cavg",ble_device_nr); | |
| id(mqtt_client).publish(mtopic,to_string(cv/14000)); | |
| snprintf(mtopic, 48,"b2500/%i/battery/cells/sum/cdiff",ble_device_nr); | |
| id(mqtt_client).publish(mtopic,to_string((cmax-cmin)/1000)); | |
| snprintf(mtopic, 48,"b2500/%i/battery/cells/sum/soccalc",ble_device_nr); | |
| id(mqtt_client).publish(mtopic,to_string(soccalc)); | |
| snprintf(mtopic, 48,"b2500/%i/battery/temp1",ble_device_nr); | |
| id(mqtt_client).publish(mtopic,to_string(t1)); | |
| snprintf(mtopic, 48,"b2500/%i/battery/temp2",ble_device_nr); | |
| id(mqtt_client).publish(mtopic,to_string(t2)); | |
| /* | |
| id(bcsoc).publish_state(soc); // SOC from device (%) | |
| id(bcsoccalc).publish_state(soccalc); // SOC calculated from cell voltages (%) | |
| id(bctemp1).publish_state(t1); // Temperature 1 (°C) | |
| id(bctemp2).publish_state(t2); // Temperature 2 (°C) | |
| id(bccvsum).publish_state(cv/1000); // sum of cellvoltages = battery Voltage(V) | |
| id(bccvmin).publish_state(cmin/1000); // lowest cellvoltage (V) | |
| id(bccvmax).publish_state(cmax/1000); // highest cellvoltage (V) | |
| id(bccvdiff).publish_state((cmax-cmin)/1000); | |
| id(bccvavg).publish_state(cv/14000); // avarage cellvoltage (V) | |
| */ | |
| } | |
| else if (x[3] == 0x03) { | |
| ESP_LOGD("main", "Data: runtimeInfo "); | |
| //sensor | |
| // pv_level 1 und 2 | |
| /* | |
| [6][7] PV-Eingangsleistung 1 (2Byte) | |
| [8][9] PV-Eingangsleistung 2 (2Byte) | |
| x[Y] | x[Z] << 8; | |
| */ | |
| int pvPower1 = x[6] | x[7] << 8; | |
| int pvPower2 = x[8] | x[9] << 8; | |
| if (ble_device_nr==1) { id(sensor_pv_power_in_1_1).publish_state(pvPower1); id(sensor_pv_power_in_1_2).publish_state(pvPower2); } | |
| if (ble_device_nr==2) { id(sensor_pv_power_in_2_1).publish_state(pvPower1); id(sensor_pv_power_in_2_2).publish_state(pvPower2); } | |
| // Batterie Stand in % | |
| /* | |
| [10][11] Verbleibende Batteriekapazität in Prozent (2Byte) | |
| x[Y] | x[Z] << 8; | |
| */ | |
| int batRemain = x[10] | x[11] << 8 ; | |
| if (ble_device_nr==1) { id(sensor_bat_remain_1).publish_state(batRemain / 10); } | |
| if (ble_device_nr==2) { id(sensor_bat_remain_2).publish_state(batRemain / 10); } | |
| // Entladen bei weniger als ??? Watt PV Eingang | |
| /* | |
| [19][20] Entladeschwelle(2Byte) | |
| x[Y] | x[Z] << 8; | |
| */ | |
| int disCharge = x[19] | x[20] << 8; | |
| if (ble_device_nr==1) { id(sensor_discharge_treshold_1).publish_state(disCharge); } | |
| if (ble_device_nr==2) { id(sensor_discharge_treshold_2).publish_state(disCharge); } | |
| // Füllstand des Akkus in Wh | |
| /* | |
| [22][23] Gesamtkapazität der Batterie (1Byte) | |
| x[Y] | x[Z] << 8; | |
| */ | |
| int batCapacity = x[22] | x[23] << 8; | |
| if (ble_device_nr==1) { id(sensor_bat_capacity_1).publish_state(batCapacity); } | |
| if (ble_device_nr==2) { id(sensor_bat_capacity_2).publish_state(batCapacity); } | |
| // Ausgangsleistung in Watt | |
| /* | |
| [24][25] Ausgangsleistung 1(1Byte) | |
| [26][27] Ausgangsleistung 2(1Byte) | |
| x[Y] | x[Z] << 8; | |
| */ | |
| int powerOut1 = x[24] | x[25] << 8; | |
| int powerOut2 = x[26] | x[27] << 8; | |
| if (ble_device_nr==1) { id(sensor_power_out_1_1).publish_state(powerOut1); id(sensor_power_out_1_2).publish_state(powerOut2); } | |
| if (ble_device_nr==2) { id(sensor_power_out_2_1).publish_state(powerOut1); id(sensor_power_out_2_2).publish_state(powerOut2); } | |
| // Geräte Version ( Firmware ? ) | |
| /* | |
| [12] B2500 Geräteversion (1Byte) | |
| 0-255 ( ~ anzeige als /100 ) | |
| */ | |
| float dev_version = x[12]; | |
| if (ble_device_nr==1) { id(sensor_device_version_1).publish_state(dev_version / 100); } | |
| if (ble_device_nr==2) { id(sensor_device_version_2).publish_state(dev_version / 100); } | |
| // | |
| /* | |
| [18] Dod (1Byte) | |
| 0-100 Prozentualer Anteil der Entladeleistung an der Nennleistung | |
| */ | |
| int dod_level = x[18]; | |
| if (ble_device_nr==1) { id(sensor_dod_1).publish_state(dod_level); } | |
| if (ble_device_nr==2) { id(sensor_dod_2).publish_state(dod_level); } | |
| // binary sensor / bool | |
| // pv 1 und 2 in | |
| /* | |
| [x4] PV IN 1 Zustand (1Byte) | |
| [x5] PV IN 2 Zustand (1Byte) | |
| 0x00 （off） | |
| 0x01 （Aufladung） | |
| 0x02 （transparent für Wechselrichter） | |
| */ | |
| if (ble_device_nr==1) { | |
| if( x[4] == 0x00 ) { id(bool_pv_active_1_1).publish_state(false);id(bool_pv_transparent_1_1).publish_state(false); } | |
| if( x[4] == 0x01 ) { id(bool_pv_active_1_1).publish_state(true); id(bool_pv_transparent_1_1).publish_state(false); } | |
| if( x[4] == 0x02 ) { id(bool_pv_active_1_1).publish_state(true); id(bool_pv_transparent_1_1).publish_state(true); } | |
| if( x[5] == 0x00 ) { id(bool_pv_active_1_2).publish_state(false);id(bool_pv_transparent_1_2).publish_state(false); } | |
| if( x[5] == 0x01 ) { id(bool_pv_active_1_2).publish_state(true); id(bool_pv_transparent_1_2).publish_state(false); } | |
| if( x[5] == 0x02 ) { id(bool_pv_active_1_2).publish_state(true); id(bool_pv_transparent_1_2).publish_state(true); } | |
| } | |
| if (ble_device_nr==2) { | |
| if( x[4] == 0x00 ) { id(bool_pv_active_2_1).publish_state(false);id(bool_pv_transparent_2_1).publish_state(false); } | |
| if( x[4] == 0x01 ) { id(bool_pv_active_2_1).publish_state(true); id(bool_pv_transparent_2_1).publish_state(false); } | |
| if( x[4] == 0x02 ) { id(bool_pv_active_2_1).publish_state(true); id(bool_pv_transparent_2_1).publish_state(true); } | |
| if( x[5] == 0x00 ) { id(bool_pv_active_2_2).publish_state(false);id(bool_pv_transparent_2_2).publish_state(false); } | |
| if( x[5] == 0x01 ) { id(bool_pv_active_2_2).publish_state(true); id(bool_pv_transparent_2_2).publish_state(false); } | |
| if( x[5] == 0x02 ) { id(bool_pv_active_2_2).publish_state(true); id(bool_pv_transparent_2_2).publish_state(true); } | |
| } | |
| // pv 2 durchleiten | |
| /* | |
| [13] Einstellung des Ladevorgangs (1Byte) | |
| 0x00 （PV1 Aufladung PV2 Durchleitung） | |
| 0x01 （Volles Laden und Entladen） | |
| */ | |
| if (ble_device_nr==1) { | |
| if( x[13] == 0x00 ) { id(switch_pv2_passthrough_1).turn_on(); } | |
| if( x[13] == 0x01 ) { id(switch_pv2_passthrough_1).turn_off(); } | |
| } | |
| if (ble_device_nr==2) { | |
| if( x[13] == 0x00 ) { id(switch_pv2_passthrough_2).turn_on(); } | |
| if( x[13] == 0x01 ) { id(switch_pv2_passthrough_2).turn_off(); } | |
| } | |
| // RESERVED ( wifi / mqtt ) | |
| /* | |
| [15] Reserve(1Byte) | |
| 0x00 wifi funktioniert nicht | |
| 0x01 wifi ok, mqtt nicht verbunden | |
| 0x02 wifi ok, mqtt connect ok | |
| ??? 0x03 wifi ok, mqtt1 connect ok, mqtt2 connect ok | |
| maybe wifi / mqtt | |
| 00 = false / false | |
| 01 = true / false | |
| 02 = false / true | |
| 03 = true / true | |
| ------- | |
| first part means not wifi connected ?!?!? | |
| 00 = ??? / mqtt not connected | |
| 01 = ??? / mqtt not connected | |
| 02 = ??? / mqtt connected | |
| 03 = ??? / mqtt connected | |
| */ | |
| // wifi and mqtt, 03 maybe webserver | |
| if (ble_device_nr==1) { | |
| if( x[15] == 0x00 ) { id(bool_wifi_ok_1).publish_state(false); id(bool_mqtt1_ok_1).publish_state(false); } | |
| if( x[15] == 0x01 ) { id(bool_wifi_ok_1).publish_state(true); id(bool_mqtt1_ok_1).publish_state(false);} | |
| if( x[15] == 0x02 ) { id(bool_wifi_ok_1).publish_state(false); id(bool_mqtt1_ok_1).publish_state(true); } | |
| if( x[15] == 0x03 ) { id(bool_wifi_ok_1).publish_state(true); id(bool_mqtt1_ok_1).publish_state(true); } | |
| } | |
| if (ble_device_nr==2) { | |
| if( x[15] == 0x00 ) { id(bool_wifi_ok_2).publish_state(false); id(bool_mqtt1_ok_2).publish_state(false); } | |
| if( x[15] == 0x01 ) { id(bool_wifi_ok_2).publish_state(true); id(bool_mqtt1_ok_2).publish_state(false); } | |
| if( x[15] == 0x02 ) { id(bool_wifi_ok_2).publish_state(false); id(bool_mqtt1_ok_2).publish_state(true); } | |
| if( x[15] == 0x03 ) { id(bool_wifi_ok_2).publish_state(true); id(bool_mqtt1_ok_2).publish_state(true); } | |
| } | |
| // power 1 und 2 enabled/disabled | |
| /* | |
| [14] Entlade-Modus / Enabled (1Byte) | |
| 0x00 OUT1&OUT2 Sperren | |
| 0x01 nur OUT1 Freigabe | |
| 0x02 nur OUT2 Freigabe | |
| 0x03 OUT1&OUT2 Freigabe | |
| */ | |
| if (ble_device_nr==1) { | |
| if( x[14] == 0x00 ) { id(switch_powerout_1_1).turn_off(); id(switch_powerout_1_2).turn_off();} | |
| if( x[14] == 0x01 ) { id(switch_powerout_1_1).turn_on(); id(switch_powerout_1_2).turn_off();} | |
| if( x[14] == 0x02 ) { id(switch_powerout_1_1).turn_off(); id(switch_powerout_1_2).turn_on(); } | |
| if( x[14] == 0x03 ) { id(switch_powerout_1_1).turn_on(); id(switch_powerout_1_2).turn_on(); } | |
| } | |
| if (ble_device_nr==2) { | |
| if( x[14] == 0x00 ) { id(switch_powerout_2_1).turn_off(); id(switch_powerout_2_2).turn_off();} | |
| if( x[14] == 0x01 ) { id(switch_powerout_2_1).turn_on(); id(switch_powerout_2_2).turn_off();} | |
| if( x[14] == 0x02 ) { id(switch_powerout_2_1).turn_off(); id(switch_powerout_2_2).turn_on(); } | |
| if( x[14] == 0x03 ) { id(switch_powerout_2_1).turn_on(); id(switch_powerout_2_2).turn_on(); } | |
| } | |
| // power 1 und 2 active | |
| /* | |
| [16] Ausgang Port 1 Status (1Byte) | |
| [17] Ausgang Port 2 Status (1Byte) | |
| 0x00（Aus） | |
| 0x01（Entladung） | |
| */ | |
| if (ble_device_nr==1) { | |
| if( x[16] == 0x00 ) { id(bool_power_active_1_1).publish_state(false);} | |
| if( x[16] == 0x01 ) { id(bool_power_active_1_1).publish_state(true); } | |
| if( x[17] == 0x00 ) { id(bool_power_active_1_2).publish_state(false);} | |
| if( x[17] == 0x01 ) { id(bool_power_active_1_2).publish_state(true); } | |
| } | |
| if (ble_device_nr==2) { | |
| if( x[16] == 0x00 ) { id(bool_power_active_2_1).publish_state(false);} | |
| if( x[16] == 0x01 ) { id(bool_power_active_2_1).publish_state(true); } | |
| if( x[17] == 0x00 ) { id(bool_power_active_2_2).publish_state(false);} | |
| if( x[17] == 0x01 ) { id(bool_power_active_2_2).publish_state(true); } | |
| } | |
| // zusatzakku 1 und 2 | |
| /* | |
| [28] Ist Netzgerät 1 angeschlossen (1Byte) | |
| [29] Ist Netzgerät 2 angeschlossen (1Byte) | |
| 0x00（Kein Akkupack angeschlossen） | |
| 0x01（Verbinden Sie das Netzteil） | |
| */ | |
| if (ble_device_nr==1) { | |
| if( x[28] == 0x00 ) { id(bool_extern_connected_1_1).publish_state(false);} | |
| if( x[28] == 0x01 ) { id(bool_extern_connected_1_1).publish_state(true); } | |
| if( x[29] == 0x00 ) { id(bool_extern_connected_1_2).publish_state(false);} | |
| if( x[29] == 0x01 ) { id(bool_extern_connected_1_2).publish_state(true); } | |
| } | |
| if (ble_device_nr==2) { | |
| if( x[28] == 0x00 ) { id(bool_extern_connected_2_1).publish_state(false);} | |
| if( x[28] == 0x01 ) { id(bool_extern_connected_2_1).publish_state(true); } | |
| if( x[29] == 0x00 ) { id(bool_extern_connected_2_2).publish_state(false);} | |
| if( x[29] == 0x01 ) { id(bool_extern_connected_2_2).publish_state(true); } | |
| } | |
| if (ble_device_nr==1) { | |
| auto call_21 = id(txt_scene_1).make_call(); | |
| if( x[21] == 0x00 ) { call_21.set_value("Tag"); } | |
| if( x[21] == 0x01 ) { call_21.set_value("Nacht"); } | |
| if( x[21] == 0x02 ) { call_21.set_value("Morgens/Abends"); } | |
| call_21.perform(); | |
| } | |
| if (ble_device_nr==2) { | |
| auto call_21 = id(txt_scene_2).make_call(); | |
| if( x[21] == 0x00 ) { call_21.set_value("Tag"); } | |
| if( x[21] == 0x01 ) { call_21.set_value("Nacht"); } | |
| if( x[21] == 0x02 ) { call_21.set_value("Morgens/Abends"); } | |
| call_21.perform(); | |
| } | |
| if (ble_device_nr==1) { | |
| auto call_30 = id(txt_region_1).make_call(); | |
| if( x[30] == 0x00 ) { call_30.set_value("EU"); } | |
| if( x[30] == 0x01 ) { call_30.set_value("China"); } | |
| if( x[30] == 0x02 ) { call_30.set_value("non-EU"); } | |
| call_30.perform(); | |
| } | |
| if (ble_device_nr==2) { | |
| auto call_30 = id(txt_region_2).make_call(); | |
| if( x[30] == 0x00 ) { call_30.set_value("EU"); } | |
| if( x[30] == 0x01 ) { call_30.set_value("China"); } | |
| if( x[30] == 0x02 ) { call_30.set_value("non-EU"); } | |
| call_30.perform(); | |
| } | |
| } | |
| else if (x[3] == 0x04) { | |
| ESP_LOGD("main", "Data: deviceInfo "); | |
| //for (auto b : x) { | |
| // ESP_LOGD("data", "%i", b); | |
| //} | |
| // 's<#?type=<5>,id=<24>,mac=<12>t' | |
| // ESP_LOGD("data", "%s", vType); | |
| int data_len = x.size(); | |
| unsigned char vType[8]; | |
| for (int i=9;i<14;i++) { | |
| vType[i-9] = x[i]; | |
| } | |
| vType[5] = 0x00; | |
| unsigned char vID[32]; | |
| for (int i=18;i<42;i++) { | |
| vID[i-18] = x[i]; | |
| } | |
| vID[24]=0x00; | |
| unsigned char vMac[16]; | |
| for (int i=47;i<59;i++) { | |
| vMac[i-47] = x[i]; | |
| } | |
| vMac[12] = 0x00; | |
| ESP_LOGD("deviceInfo", "%i: %s [%s] %s", data_len,vType,vMac,vID); | |
| std::string sType(reinterpret_cast<char*>(vType)); | |
| std::string sID(reinterpret_cast<char*>(vID)); | |
| std::string sMac(reinterpret_cast<char*>(vMac)); | |
| if (ble_device_nr==1) { id(txt_A01_1).publish_state(sType); id(txt_A02_1).publish_state(sID); id(txt_A03_1).publish_state(sMac); } | |
| if (ble_device_nr==2) { id(txt_A01_2).publish_state(sType); id(txt_A02_2).publish_state(sID); id(txt_A03_2).publish_state(sMac); } | |
| } | |
| // get wifi info - "admin mode" only | |
| else if (x[3] == 0x08) { | |
| ESP_LOGD("main", "Data: wifiInfo "); | |
| int data_len = x.size(); | |
| unsigned char vSSID[32]; | |
| for (int i=4;i<data_len-1;i++) { | |
| vSSID[i-4] = x[i]; | |
| } | |
| vSSID[data_len-5] = 0x00; | |
| ESP_LOGD("deviceInfo", "%i: %s", data_len,vSSID); | |
| std::string sSSID(reinterpret_cast<char*>(vSSID)); | |
| if (ble_device_nr==1) { id(txt_A11_1).publish_state(sSSID); } | |
| if (ble_device_nr==2) { id(txt_A11_2).publish_state(sSSID); } | |
| for (auto b : x) { | |
| ESP_LOGD("data", "%x \t %i \t %x", b,b,b); | |
| } | |
| } | |
| else if (x[3] == 0x30) { | |
| ESP_LOGD("main", "Data: cmd 0x30 "); | |
| int data_len = x.size(); | |
| int data_pos = 0; | |
| int rxor = 0; | |
| for (int i=0;i<data_len;i++) { | |
| rxor = rxor ^ x[i]; | |
| } | |
| /* | |
| //if( rxor != id(cmd30_xor_last_1) ) { | |
| ESP_LOGD("data 30 - raw" , "Device %i",ble_device_nr); | |
| ESP_LOGD("data 30 - raw" , "0x%.2x 0x%.2x 0x%.2x 0x%.2x", x[0], x[1], x[2], x[3]); | |
| for(int i=4;i<data_len-1;i++) { | |
| ESP_LOGD("data 30 - raw" , "0x%.2x 0x%.2x 0x%.2x 0x%.2x 0x%.2x 0x%.2x 0x%.2x 0x%.2x 0x%.2x", x[i], x[i+1], x[i+2], x[i+3], x[i+4],x[i+5],x[i+6],x[i+7],x[i+8]); | |
| i += 8; | |
| } | |
| //ESP_LOGD("data 30 - raw" , " "); | |
| id(cmd30_xor_last_1) = rxor; | |
| //} | |
| */ | |
| } | |
| /* | |
| else if (x[3] == 0x30) { | |
| ESP_LOGD("main", "Data: cmd 0x30"); | |
| int data_len = x.size(); | |
| for(int i=0;i<data_len;i++) { | |
| int d1 = x[i]; | |
| ESP_LOGD("data 30" , "%x \t %i \t %c" , d1, d1, char(d1)); | |
| } | |
| } | |
| */ | |
| // debug ??? | |
| else if (x[3] == 0x01) { | |
| ESP_LOGD("main", "Data: cmd 0x01"); | |
| int data_len = x.size(); | |
| for(int i=0;i<data_len;i++) { | |
| int d1 = x[i]; | |
| ESP_LOGD("data 01" , "%x \t %i \t %c" , d1, d1, char(d1)); | |
| } | |
| } | |
| else if (x[3] == 0x81) { | |
| ESP_LOGD("main", "Data: cmd 0x81"); | |
| int data_len = x.size(); | |
| for(int i=0;i<data_len;i++) { | |
| int d1 = x[i]; | |
| ESP_LOGD("data 81" , "%x \t %i \t %c" , d1, d1, char(d1)); | |
| } | |
| } | |
| else { | |
| /*int data_len = x.size(); | |
| for(int i=0;i<data_len;i++) { | |
| int d1 = x[i]; | |
| ESP_LOGD("unknown" , "%x \t %i \t %c" , d1, d1, char(d1)); | |
| } | |
| */ | |
| ESP_LOG_BUFFER_HEXDUMP("hexdump", &x[0], x.size(), ESP_LOG_ERROR); | |
| } | |
| - id: power_zero | |
| then: | |
| ### Nulleinspeisung - Powerzero by neromatrix | |
| ### - mqtt only adaption by noone2k | |
| ### first attempt, use at your own risk ! | |
| ### Ver. 0.01m | |
| - lambda: |- | |
| if(id(switch_opendtu_limit).state) | |
| { | |
| int ptu_min_value = 5; | |
| int ptu_max_value = id(mqtt_opendtu_limit_max).state; // 50; // <- nax rel value -> id(npw2500_zeropower_max_powerlimit_rel).state; | |
| int ptu_limit = 0; | |
| int ptu_max_power = 900; // max:2 (x:4*2 for 4port using 2port) | |
| int grid_to_ptu_ratio = ptu_max_power/100; | |
| int grid_min_value = 20; | |
| static int ptu_old_limit = 0; | |
| /* | |
| <- actual power mqtt -> prev. int(id(npw2500_grid_power).state); | |
| keep over grid_min_value | |
| */ | |
| int grid_value = int(id(mqtt_grid_power).state) - grid_min_value;; | |
| ptu_limit = grid_value / grid_to_ptu_ratio + ptu_old_limit; | |
| if(ptu_limit > ptu_max_value) ptu_limit = ptu_max_value; | |
| if(ptu_limit < ptu_min_value) ptu_limit = ptu_min_value; | |
| // change only if diff more than +/-1% | |
| if ( ptu_limit - ptu_old_limit > 1 || ptu_old_limit - ptu_limit > 1 ) { | |
| ESP_LOGD("npw2500","PowerZero PTU old limit %d, PTU new limit %d, Grid value %d " ,ptu_old_limit, ptu_limit, grid_value); | |
| ptu_old_limit = ptu_limit; | |
| //char mtopic[64]; | |
| //snprintf(mtopic, 64,"openDTU/XXXXXXXXXXX/cmd/limit_persistent_relative"); | |
| //id(mqtt_client).publish(mtopic,to_string(ptu_limit)); | |
| id(mqtt_opendtu_limit).publish_state(ptu_limit); | |
| } | |
| } |
habe mal gepushed ...
die liste entstand aus meinen lokalen versionen.
anscheinend habe ich da was übersehen, beim aufräumen / einbetten / entfernen ...
einiges von den commands sind auch nicht in den öffentlichen versionen verfügbar ...
ich gehe die liste nochmals durch und entferne sachen. sonst kommt man da durcheinander ...
Kein Blutdruck ! Solange ich das noch selbst raus finde und einbauen kann ist alles OK. Nur laufen halt Deine Version und meine immer weiter auseinander. Man kann das jetzt schon nicht mehr automatisch zusammenführen 😢
fehler passieren ... wenn man nicht darauf hingewiesen wird, kann man diese auch nicht beheben ( wenn es welche sind und es notwendig ist ).
mein selbstwertgefühl ist stark genug um fehler einzugestehen 😁
//edit
meine "produktive" version ist auch anders als die im git ... das ist ne grundlage für alle ...
nur funktionen, die allgemein nützlich sind, werden ins git portiert.
und dabei passieren fehler ;)
wenn du was allgemein nützliches hast, kannst du auch pull request machen ( oder fehler für alle korrigieren )...
nicht alle änderungen, die ich hier nutze, sind für alle nützlich ...
@noone2k
Erstmal super Arbeit...ich wünschte ich könnte das auch so...
Da ich leider gar nicht programmieren kann und auch eher nur so ein Bisschen in FHEM rum bastele, hab ich versucht über diese Möglichkeit und MQTT die Speicher in FHEM einzubinden, was Dank deiner Arbeit auch super funktioniert hat.
Da der ESP aber alle 5sek published und ich noch eine ganze Menge anderer Sensoren und Aktoren habe, ist der Raspberry recht ausgelastet.
Und daher meine Frage ob und wo man was verändern kann, damit der ESP nicht ganz so viel "redet". Mir würde das durchaus auch alle 30 sek reichen...
schöne Grüße
suche mal im script nach interval ...
bei der version für den v2: https://github.com/noone2k/hm2500pub/blob/c9b159f5cc4d9c7b8cc980e8c650165c81389f42/config/b2500-v2-ble-idf.yaml#L104
habe gerade gesehen, das bei der v1 version noch die timer-funktion des sntp genutzt wird.
da nach "sntp" suchen:
https://github.com/noone2k/hm2500pub/blob/c9b159f5cc4d9c7b8cc980e8c650165c81389f42/config/bc2500-ble-idf.yaml#L87
suche mal im script nach interval ...
bei der version für den v2: https://github.com/noone2k/hm2500pub/blob/c9b159f5cc4d9c7b8cc980e8c650165c81389f42/config/b2500-v2-ble-idf.yaml#L104
habe gerade gesehen, das bei der v1 version noch die timer-funktion des sntp genutzt wird. da nach "sntp" suchen: https://github.com/noone2k/hm2500pub/blob/c9b159f5cc4d9c7b8cc980e8c650165c81389f42/config/bc2500-ble-idf.yaml#L87
Klasse ... Danke für den Hinweis
sollte der power knopf am b2500 was machen? in der anleitung steht nichts davon und aus geht der vom drücken nicht. was ist der unterschied zwischen passthrough und charge and discharge? steht auch gar nichts in der anleitung dazu. schon mal vielen dank für die hilfe!
@Larvy soll ich bei den timern in der batterie einfach nur den ersten anhaben und von 0:00 bis 23:59 auf 800W setzen? habe mir jetzt auch einen Hoymiles HMS-2000-4T zugelegt, jetzt fehlen nur noch ein paar verlängerungskabel und das openDTU. spricht was dagegen den wechselrichter output sekundengenau anzupassen? mein auslesegerät am zähler sendet auch jede sekunde updates.
wie sollte ich die solarplatten, die batterie und den wechselrichter am besten zusammenstecken damit diese am effizientesten zusammenarbeiten? Ich habe 4x 415W und 1x 440W, die batterie und jetzt den HMS-2000-4T.
Kann der hier anwesenden IOBroker Benutzer mir vielleicht mal Screenshots der MQTT Instanz zeigen?
Wenn ich nämlich folgendes Tool verwende: https://tomquist.github.io/esphome-b2500/
Dann wird zwar die Bluetooth Verbindung sowie auch die MQTT Verbindung aufgebaut. Allerdings werden nicht alle Topics angelegt.
Wenn ich die hier zur Verfügung gestellte Yaml Datei (V2) auf den ESP flashe dann wird keine Bluetooth Verbindung aufgebaut bzw. steht das hier im Log:
[11:13:49][I][app:100]: ESPHome version 2024.6.1 compiled on Jun 20 2024, 11:12:41
[11:13:49][I][app:102]: Project esphome.web version 1.0
[11:13:49][W][component:170]: Component mqtt cleared Warning flag
[11:13:49][W][component:170]: Component mqtt cleared Warning flag
[11:13:49][W][component:170]: Component mqtt cleared Warning flag
[11:13:49][W][component:170]: Component mqtt cleared Warning flag
[11:13:49][W][component:170]: Component mqtt cleared Warning flag
[11:13:49][W][component:170]: Component mqtt cleared Warning flag
[11:13:50][W][component:170]: Component mqtt cleared Warning flag
[11:13:50][W][component:170]: Component mqtt cleared Warning flag
[11:13:50][W][component:170]: Component mqtt cleared Warning flag
[11:13:50][W][component:170]: Component mqtt cleared Warning flag
[11:13:50][W][component:170]: Component mqtt cleared Warning flag
[11:13:50][W][component:170]: Component mqtt cleared Warning flag
[11:13:50][W][component:170]: Component mqtt cleared Warning flag
[11:13:50][W][component:170]: Component mqtt cleared Warning flag
[11:13:50][W][component:170]: Component mqtt cleared Warning flag
[11:13:50][W][component:170]: Component mqtt cleared Warning flag
[11:13:50][W][component:170]: Component mqtt cleared Warning flag
[11:13:50][W][component:170]: Component mqtt cleared Warning flag
[11:13:50][W][component:170]: Component mqtt cleared Warning flag
[11:13:50][W][component:170]: Component mqtt cleared Warning flag
[11:13:50][W][component:170]: Component mqtt cleared Warning flag
[11:13:50][W][component:170]: Component mqtt cleared Warning flag
[11:13:50][W][component:170]: Component mqtt cleared Warning flag
[11:13:50][W][component:170]: Component mqtt cleared Warning flag
[11:13:50][W][component:170]: Component mqtt cleared Warning flag
[11:14:04][I][main:3181]: ble command send: 1 [0x0F] 1
[11:14:04][W][ble_client.automation:141]: Cannot write to BLE characteristic - not connected
[11:14:05][I][main:3181]: ble command send: 1 [0x13] 0
[11:14:05][W][ble_client.automation:141]: Cannot write to BLE characteristic - not connected
[11:14:09][I][main:3181]: ble command send: 1 [0x0F] 1
[11:14:09][W][ble_client.automation:141]: Cannot write to BLE characteristic - not connected
[11:14:10][I][main:3181]: ble command send: 1 [0x13] 0
[11:14:10][W][ble_client.automation:141]: Cannot write to BLE characteristic - not connected
[11:14:11][W][ble_sensor:123]: [infoX6a] Cannot poll, not connected
Was muss denn bei den MAC Adressen genau eingetragen werden? Es gibt ja hm2500_3_mac und hm2500_4_mac. An sich habe ich ja nur einen Speicher und dadurch eine MAC.
Vielen Dank
Hallo und vielen Dank für das tolle Projekt!
Allerdings scheitere ich am Programmieren meines wemos_d1_mini32 über ESPHome: "Error - The program size (1844213 bytes) is greater than maximum allowed (1835008 bytes)".
dabei soll das Gerät 2MB haben... Wie kann ich das beheben? Alle ESP-Modelle und ESP-Home sind ja mit 320KiB definiert?
Vielen Dank von einem HA-Newbie!
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Tja, wenn die Connand_Topics auch bei den Buttons mit drin wären, würde es auch mit der Nachbarin, ähhh den MQTT-Reboots funktionieren 😉 Wenn ich das richtig gesehen habe fehlen alle esp32-Command_topics.