Last active
July 29, 2024 09:05
-
-
Save noone2k/2ddea4c9bf116aaaefb8626b064d9a41 to your computer and use it in GitHub Desktop.
bc2500 info/control with esphome
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| esphome: | |
| name: bc2500-ble-idf | |
| friendly_name: bc2500-ble-idf | |
| esp32: | |
| board: az-delivery-devkit-v4 | |
| framework: | |
| type: esp-idf | |
| sdkconfig_options: | |
| CONFIG_FREERTOS_UNICORE: y | |
| advanced: | |
| ignore_efuse_mac_crc: true | |
| # Enable logging | |
| logger: | |
| # level: INFO | |
| # level: DEBUG | |
| # baud_rate: 0 | |
| ota: | |
| password: !secret ota_password | |
| wifi: | |
| ssid: !secret wifi_ssid | |
| password: !secret wifi_password | |
| reboot_timeout: 0s | |
| fast_connect: True | |
| # Enable fallback hotspot (captive portal) in case wifi connection fails | |
| ap: | |
| ssid: "Bc2500-Ble Fallback Hotspot" | |
| web_server: | |
| port: 80 | |
| local: true | |
| js_include: "./v2/www.js" | |
| js_url: "" | |
| version: 2 | |
| captive_portal: | |
| mqtt: | |
| id: mqtt_client | |
| broker: !secret mqtt_broker | |
| port: !secret mqtt_port | |
| discovery: False | |
| reboot_timeout: 0s | |
| topic_prefix: b2500 | |
| log_topic: b2500/debug | |
| time: | |
| - platform: sntp | |
| id: sntp_time | |
| on_time: | |
| # Every 10 seconds | |
| - seconds: /10 | |
| then: | |
| - script.execute: ble_process | |
| - script.wait: ble_process | |
| #- script.execute: power_zero | |
| #- button.press: query_info3 | |
| globals: | |
| - id: ble_1_connected | |
| type: bool | |
| initial_value: '0' | |
| - id: ble_1_initialized | |
| type: bool | |
| initial_value: '0' | |
| - id: ble_2_connected | |
| type: bool | |
| initial_value: '0' | |
| - id: ble_2_initialized | |
| type: bool | |
| initial_value: '0' | |
| - id: cmd30_xor_last_1 | |
| type: int | |
| initial_value: '0' | |
| - id: cmd30_xor_last_2 | |
| type: int | |
| initial_value: '0' | |
| - id: internal_console_dbg | |
| type: bool | |
| initial_value: '0' | |
| - id: internal_console_hexdump | |
| type: bool | |
| initial_value: '1' | |
| esp32_ble_tracker: | |
| ble_client: | |
| - mac_address: !secret hm2500_1_mac | |
| id: bc2500_1 | |
| on_connect: | |
| then: | |
| - globals.set: | |
| id: ble_1_connected | |
| value: '1' | |
| - binary_sensor.template.publish: | |
| id: bool_ble_ok_1 | |
| state: ON | |
| - script.execute: | |
| id: ble_set_time | |
| ble_device_nr: 1 | |
| - script.wait: ble_set_time | |
| - script.execute: | |
| id: ble_set_time | |
| ble_device_nr: 1 | |
| - script.wait: ble_set_time | |
| on_disconnect: | |
| then: | |
| - binary_sensor.template.publish: | |
| id: bool_ble_ok_1 | |
| state: OFF | |
| - globals.set: | |
| id: ble_1_connected | |
| value: '0' | |
| - globals.set: | |
| id: ble_1_initialized | |
| value: '0' | |
| - mac_address: !secret hm2500_2_mac | |
| id: bc2500_2 | |
| on_connect: | |
| then: | |
| - globals.set: | |
| id: ble_2_connected | |
| value: '1' | |
| - binary_sensor.template.publish: | |
| id: bool_ble_ok_2 | |
| state: ON | |
| - script.execute: | |
| id: ble_set_time | |
| ble_device_nr: 2 | |
| - script.wait: ble_set_time | |
| - script.execute: | |
| id: ble_set_time | |
| ble_device_nr: 2 | |
| - script.wait: ble_set_time | |
| on_disconnect: | |
| then: | |
| - binary_sensor.template.publish: | |
| id: bool_ble_ok_2 | |
| state: OFF | |
| - globals.set: | |
| id: ble_2_connected | |
| value: '0' | |
| - globals.set: | |
| id: ble_2_initialized | |
| value: '0' | |
| button: | |
| - platform: restart | |
| id: controller_restart | |
| name: "Restart Controller" | |
| number: | |
| - platform: template | |
| name: "D1-52: Entladeschwelle" | |
| id: sensor_discharge_treshold_1 | |
| state_topic: b2500/1/battery/discharge_treshold | |
| command_topic: b2500/1/battery/discharge_treshold/set | |
| optimistic: True | |
| min_value: 1 | |
| max_value: 500 | |
| step: 1 | |
| restore_value: True | |
| on_value: | |
| - script.execute: | |
| id: ble_set_discharge_treshold | |
| ble_device_nr: 1 | |
| discharge: !lambda return x; | |
| - platform: template | |
| name: "D1-53: DOD" | |
| state_topic: b2500/1/battery/dod | |
| command_topic: b2500/1/battery/dod/set | |
| id: sensor_dod_1 | |
| optimistic: True | |
| min_value: 10 | |
| max_value: 100 | |
| step: 1 | |
| restore_value: True | |
| on_value: | |
| - script.execute: | |
| id: ble_set_dod | |
| ble_device_nr: 1 | |
| dod: !lambda return x; | |
| - platform: template | |
| name: "D2-52: Entladeschwelle" | |
| id: sensor_discharge_treshold_2 | |
| state_topic: b2500/2/battery/discharge_treshold | |
| command_topic: b2500/2/battery/discharge_treshold/set | |
| optimistic: True | |
| min_value: 1 | |
| max_value: 500 | |
| step: 1 | |
| restore_value: True | |
| on_value: | |
| - script.execute: | |
| id: ble_set_discharge_treshold | |
| ble_device_nr: 2 | |
| discharge: !lambda return x; | |
| - platform: template | |
| name: "D2-53: DOD" | |
| state_topic: b2500/2/battery/dod | |
| command_topic: b2500/2/battery/dod/set | |
| id: sensor_dod_2 | |
| optimistic: True | |
| min_value: 10 | |
| max_value: 100 | |
| step: 1 | |
| restore_value: True | |
| on_value: | |
| - script.execute: | |
| id: ble_set_dod | |
| ble_device_nr: 2 | |
| dod: !lambda return x; | |
| ### power zero | |
| - platform: template | |
| name: "MQTT: opendtu set limit" | |
| id: mqtt_opendtu_limit | |
| internal: False | |
| state_topic: !secret mqtt_opendtu_limit_cmd | |
| command_topic: !secret mqtt_opendtu_limit_state | |
| optimistic: True | |
| min_value: 1 | |
| max_value: 75 | |
| step: 1 | |
| restore_value: True | |
| - platform: template | |
| name: "MQTT: opendtu set limit max" | |
| id: mqtt_opendtu_limit_max | |
| internal: False | |
| optimistic: True | |
| min_value: 1 | |
| max_value: 75 | |
| step: 1 | |
| restore_value: True | |
| switch: | |
| - platform: template | |
| id: switch_powerout_1_1 | |
| name: "D1-01: Power Out 1" | |
| state_topic: b2500/1/power1/enabled | |
| command_topic: b2500/1/power1/enabled/set | |
| optimistic: True | |
| assumed_state: True | |
| on_turn_on: | |
| then: | |
| - switch.turn_on: switch_powerout_1_1 | |
| - script.execute: | |
| id: ble_powerout | |
| ble_device_nr: 1 | |
| on_turn_off: | |
| then: | |
| - switch.turn_off: switch_powerout_1_1 | |
| - script.execute: | |
| id: ble_powerout | |
| ble_device_nr: 1 | |
| - platform: template | |
| id: switch_powerout_1_2 | |
| name: "D1-02: Power Out 2" | |
| state_topic: b2500/1/power2/enabled | |
| command_topic: b2500/1/power2/enabled/set | |
| optimistic: True | |
| assumed_state: True | |
| on_turn_on: | |
| then: | |
| - switch.turn_on: switch_powerout_1_2 | |
| - script.execute: | |
| id: ble_powerout | |
| ble_device_nr: 1 | |
| on_turn_off: | |
| then: | |
| - switch.turn_off: switch_powerout_1_2 | |
| - script.execute: | |
| id: ble_powerout | |
| ble_device_nr: 1 | |
| - platform: template | |
| id: switch_powerout_2_1 | |
| name: "D2-01: Power Out 1" | |
| state_topic: b2500/2/power1/enabled | |
| command_topic: b2500/2/power1/enabled/set | |
| optimistic: True | |
| assumed_state: True | |
| on_turn_on: | |
| then: | |
| - script.execute: | |
| id: ble_powerout | |
| ble_device_nr: 2 | |
| on_turn_off: | |
| then: | |
| - script.execute: | |
| id: ble_powerout | |
| ble_device_nr: 2 | |
| - platform: template | |
| id: switch_powerout_2_2 | |
| name: "D2-02: Power Out 2" | |
| state_topic: b2500/2/power2/enabled | |
| command_topic: b2500/2/power2/enabled/set | |
| optimistic: True | |
| assumed_state: True | |
| on_turn_on: | |
| then: | |
| - script.execute: | |
| id: ble_powerout | |
| ble_device_nr: 2 | |
| on_turn_off: | |
| then: | |
| - script.execute: | |
| id: ble_powerout | |
| ble_device_nr: 2 | |
| - platform: template | |
| id: switch_pv2_passthrough_1 | |
| name: "D1-03: PV2 Passtrough" | |
| state_topic: b2500/1/pv2/passtrough | |
| command_topic: b2500/1/pv2/passtrough/set | |
| optimistic: True | |
| assumed_state: True | |
| on_turn_on: | |
| then: | |
| - script.execute: | |
| id: ble_passthrough | |
| ble_device_nr: 1 | |
| switch_cmd: 0 | |
| on_turn_off: | |
| then: | |
| - script.execute: | |
| id: ble_passthrough | |
| ble_device_nr: 1 | |
| switch_cmd: 1 | |
| - platform: template | |
| id: switch_pv2_passthrough_2 | |
| name: "D2-03: PV2 Passtrough" | |
| state_topic: b2500/2/pv2/passtrough | |
| command_topic: b2500/2/pv2/passtrough/set | |
| optimistic: True | |
| assumed_state: True | |
| on_turn_on: | |
| then: | |
| - script.execute: | |
| id: ble_passthrough | |
| ble_device_nr: 2 | |
| switch_cmd: 0 | |
| on_turn_off: | |
| then: | |
| - script.execute: | |
| id: ble_passthrough | |
| ble_device_nr: 2 | |
| switch_cmd: 1 | |
| - platform: template | |
| id: switch_debug_hexdump | |
| name: "INTERNAL:DEBUG HEXDUMP" | |
| optimistic: True | |
| #assumed_state: True | |
| - platform: template | |
| id: switch_opendtu_limit | |
| name: "MQTT: opendtu - zero power" | |
| optimistic: True | |
| #assumed_state: True | |
| text: | |
| - platform: template | |
| name: "A1-t01 - Device Type" | |
| id: txt_A01_1 | |
| state_topic: b2500/1/device/type | |
| optimistic: true | |
| max_length: 30 | |
| mode: text | |
| - platform: template | |
| name: "A1-t02 - Device ID" | |
| state_topic: b2500/1/device/id | |
| id: txt_A02_1 | |
| optimistic: true | |
| max_length: 30 | |
| mode: text | |
| - platform: template | |
| name: "A1-t03 - MAC" | |
| id: txt_A03_1 | |
| state_topic: b2500/1/device/ble_mac | |
| optimistic: true | |
| max_length: 30 | |
| mode: text | |
| - platform: template | |
| name: "A1-t04 - SSID" | |
| id: txt_A11_1 | |
| state_topic: b2500/1/device/wifi_ssid | |
| optimistic: true | |
| max_length: 30 | |
| mode: text | |
| - platform: template | |
| name: "A2-t01 - Device Type" | |
| id: txt_A01_2 | |
| state_topic: b2500/2/device/type | |
| optimistic: true | |
| max_length: 30 | |
| mode: text | |
| - platform: template | |
| name: "A2-t02 - Device ID" | |
| id: txt_A02_2 | |
| state_topic: b2500/2/device/id | |
| optimistic: true | |
| max_length: 30 | |
| mode: text | |
| - platform: template | |
| name: "A2-t03 - MAC" | |
| id: txt_A03_2 | |
| optimistic: true | |
| state_topic: b2500/2/device/ble_mac | |
| max_length: 30 | |
| mode: text | |
| - platform: template | |
| name: "A2-t04 - SSID" | |
| id: txt_A11_2 | |
| state_topic: b2500/2/device/wifi_ssid | |
| optimistic: true | |
| max_length: 30 | |
| mode: text | |
| - platform: template | |
| name: "A1-t56: Szene" | |
| id: txt_scene_1 | |
| state_topic: b2500/1/device/scene | |
| optimistic: true | |
| max_length: 32 | |
| mode: text | |
| - platform: template | |
| name: "A1-t57: Region" | |
| id: txt_region_1 | |
| state_topic: b2500/1/device/region | |
| optimistic: true | |
| max_length: 8 | |
| mode: text | |
| - platform: template | |
| name: "A2-t56: Szene" | |
| id: txt_scene_2 | |
| state_topic: b2500/2/device/scene | |
| optimistic: true | |
| max_length: 32 | |
| mode: text | |
| - platform: template | |
| name: "A2-t57: Region" | |
| id: txt_region_2 | |
| state_topic: b2500/2/device/region | |
| optimistic: true | |
| max_length: 8 | |
| mode: text | |
| binary_sensor: | |
| - platform: template | |
| name: "D1-i01: PV 1 - Aktiv" | |
| id: bool_pv_active_1_1 | |
| state_topic: b2500/1/pv1/active | |
| - platform: template | |
| name: "D1-i11: PV 2 - Aktiv" | |
| id: bool_pv_active_1_2 | |
| state_topic: b2500/1/pv2/active | |
| - platform: template | |
| name: "D1-i02: PV 1 - Transparent" | |
| id: bool_pv_transparent_1_1 | |
| state_topic: b2500/1/pv1/transparent | |
| - platform: template | |
| name: "D1-i11: PV 2 - Transparent" | |
| id: bool_pv_transparent_1_2 | |
| state_topic: b2500/1/pv2/transparent | |
| - platform: template | |
| name: "D1-i54: Wifi Connected (?)" | |
| id: bool_wifi_ok_1 | |
| state_topic: b2500/1/device/wifi_ok | |
| - platform: template | |
| name: "D1-i55: MQTT1 Connected" | |
| id: bool_mqtt1_ok_1 | |
| state_topic: b2500/1/device/mqtt_ok | |
| - platform: template | |
| name: "D1-i58: BLE Connected" | |
| id: bool_ble_ok_1 | |
| state_topic: b2500/1/device/ble_ok | |
| - platform: template | |
| name: "D1-i21: Ausgang 1 - Aktiv" | |
| id: bool_power_active_1_1 | |
| state_topic: b2500/1/power1/active | |
| - platform: template | |
| name: "D1-i31: Ausgang 2 - Aktiv" | |
| id: bool_power_active_1_2 | |
| state_topic: b2500/1/power2/active | |
| - platform: template | |
| name: "D1-i40: Erweiterung 1 - angeschlossen" | |
| id: bool_extern_connected_1_1 | |
| state_topic: b2500/1/extern1/connected | |
| - platform: template | |
| name: "D1-i41: Erweiterung 2 - angeschlossen" | |
| id: bool_extern_connected_1_2 | |
| state_topic: b2500/1/extern2/connected | |
| - platform: template | |
| name: "D2-i01: PV 1 - Aktiv" | |
| id: bool_pv_active_2_1 | |
| state_topic: b2500/2/pv1/active | |
| - platform: template | |
| name: "D2-i11: PV 2 - Aktiv" | |
| id: bool_pv_active_2_2 | |
| state_topic: b2500/2/pv2/active | |
| - platform: template | |
| name: "D2-i02: PV 1 - Transparent" | |
| id: bool_pv_transparent_2_1 | |
| state_topic: b2500/2/pv1/transparent | |
| - platform: template | |
| name: "D2-i12: PV 2 - Transparent" | |
| id: bool_pv_transparent_2_2 | |
| state_topic: b2500/2/pv2/transparent | |
| - platform: template | |
| name: "D2-i54: Wifi Connected (?)" | |
| id: bool_wifi_ok_2 | |
| state_topic: b2500/2/device/wifi_ok | |
| - platform: template | |
| name: "D2-i55: MQTT1 Connected" | |
| id: bool_mqtt1_ok_2 | |
| state_topic: b2500/2/device/mqtt_ok | |
| - platform: template | |
| name: "D2-i58: BLE Connected" | |
| id: bool_ble_ok_2 | |
| state_topic: b2500/2/device/ble_ok | |
| - platform: template | |
| name: "D2-i21: Ausgang 1 - Aktiv" | |
| id: bool_power_active_2_1 | |
| state_topic: b2500/2/power1/active | |
| - platform: template | |
| name: "D2-i31: Ausgang 2 - Aktiv" | |
| id: bool_power_active_2_2 | |
| state_topic: b2500/2/power2/active | |
| - platform: template | |
| name: "D2-i40: Erweiterung 1 - angeschlossen" | |
| id: bool_extern_connected_2_1 | |
| state_topic: b2500/2/extern1/connected | |
| - platform: template | |
| name: "D2-i41: Erweiterung 2 - angeschlossen" | |
| id: bool_extern_connected_2_2 | |
| state_topic: b2500/2/extern2/connected | |
| sensor: | |
| - platform: template | |
| name: "D1-i05: PV 1 - Leistung" | |
| id: sensor_pv_power_in_1_1 | |
| state_topic: b2500/1/pv1/power | |
| accuracy_decimals: 0 | |
| - platform: template | |
| name: "D1-i15: PV 2 - Leistung" | |
| id: sensor_pv_power_in_1_2 | |
| state_topic: b2500/1/pv2/power | |
| accuracy_decimals: 0 | |
| - platform: template | |
| name: "D1-i50: Füllstand der Batterie in Prozent" | |
| id: sensor_bat_remain_1 | |
| state_topic: b2500/1/battery/remaining_percent | |
| accuracy_decimals: 0 | |
| - platform: template | |
| name: "D1-i51: Füllstand der Batterie in Wh" | |
| id: sensor_bat_capacity_1 | |
| state_topic: b2500/1/battery/remaining_capacity | |
| accuracy_decimals: 0 | |
| - platform: template | |
| name: "D1-i25: Ausgang 1 - Leistung" | |
| id: sensor_power_out_1_1 | |
| state_topic: b2500/1/power1/power | |
| accuracy_decimals: 0 | |
| - platform: template | |
| name: "D1-i35: Ausgang 2 - Leistung" | |
| id: sensor_power_out_1_2 | |
| state_topic: b2500/1/power2/power | |
| accuracy_decimals: 0 | |
| - platform: template | |
| name: "A1-t59: Geräte Version" | |
| id: sensor_device_version_1 | |
| state_topic: b2500/1/device/fw_version | |
| accuracy_decimals: 2 | |
| - platform: template | |
| name: "D2-i05: PV 1 - Leistung" | |
| id: sensor_pv_power_in_2_1 | |
| state_topic: b2500/2/pv1/power | |
| accuracy_decimals: 0 | |
| - platform: template | |
| name: "D2-i15: PV 2 - Leistung" | |
| id: sensor_pv_power_in_2_2 | |
| state_topic: b2500/2/pv2/power | |
| accuracy_decimals: 0 | |
| - platform: template | |
| name: "D2-i50: Füllstand der Batterie in Prozent" | |
| id: sensor_bat_remain_2 | |
| state_topic: b2500/2/battery/remaining_percent | |
| accuracy_decimals: 0 | |
| - platform: template | |
| name: "D2-i51: Füllstand der Batterie in Wh" | |
| id: sensor_bat_capacity_2 | |
| state_topic: b2500/2/battery/remaining_capacity | |
| accuracy_decimals: 0 | |
| - platform: template | |
| name: "D2-i25: Ausgang 1 - Leistung " | |
| id: sensor_power_out_2_1 | |
| state_topic: b2500/2/power1/power | |
| accuracy_decimals: 0 | |
| - platform: template | |
| name: "D2-i35: Ausgang 2 - Leistung " | |
| id: sensor_power_out_2_2 | |
| state_topic: b2500/2/power2/power | |
| accuracy_decimals: 0 | |
| - platform: template | |
| name: "A2-t59: Geräte Version" | |
| id: sensor_device_version_2 | |
| state_topic: b2500/2/device/fw_version | |
| accuracy_decimals: 2 | |
| - platform: ble_client | |
| ble_client_id: bc2500_1 | |
| internal: True | |
| type: characteristic | |
| name: "infoX2a" | |
| id: infoX2a | |
| service_uuid: 'ff00' | |
| characteristic_uuid: 'ff02' | |
| notify: True | |
| lambda: |- | |
| std::vector<char> tData; | |
| for (auto b : x) { tData.push_back(b); } | |
| id(ble_notify_parse).execute(1,tData); | |
| return (float)x[0]; | |
| - platform: ble_client | |
| ble_client_id: bc2500_2 | |
| internal: True | |
| type: characteristic | |
| name: "infoX2b" | |
| id: infoX2b | |
| service_uuid: 'ff00' | |
| characteristic_uuid: 'ff02' | |
| notify: True | |
| lambda: |- | |
| std::vector<char> tData; | |
| for (auto b : x) { tData.push_back(b); } | |
| id(ble_notify_parse).execute(2,tData); | |
| return (float)x[0]; | |
| ### power zero - mqtt grid power sensor ( any who publish the grid power to mqtt - defined in secrets,yaml ) | |
| - platform: mqtt_subscribe | |
| name: "MQTT: Grid Power" | |
| id: mqtt_grid_power | |
| topic: !secret mqtt_grid_power | |
| on_value: | |
| then: | |
| - script.execute: power_zero | |
| ###test | |
| - platform: ble_client | |
| ble_client_id: bc2500_1 | |
| internal: True | |
| type: characteristic | |
| name: "infoX6a" | |
| id: infoX6a | |
| service_uuid: 'ff00' | |
| characteristic_uuid: 'ff06' | |
| notify: True | |
| lambda: |- | |
| std::vector<char> tData; | |
| for (auto b : x) { tData.push_back(b); } | |
| id(ble_notify_parse_test).execute(1,tData); | |
| return (float)x[0]; | |
| - platform: ble_client | |
| ble_client_id: bc2500_2 | |
| internal: True | |
| type: characteristic | |
| name: "infoX6b" | |
| id: infoX6b | |
| service_uuid: 'ff00' | |
| characteristic_uuid: 'ff06' | |
| notify: True | |
| lambda: |- | |
| std::vector<char> tData; | |
| for (auto b : x) { tData.push_back(b); } | |
| id(ble_notify_parse_test).execute(1,tData); | |
| return (float)x[0]; | |
| script: | |
| # ble communication | |
| # | |
| # action ( 00f1 ) | |
| # | |
| # head = 0x73 | |
| # length = len(paket) | |
| # cntl = 0x23 | |
| # cmd = 0x02 set Region 1Byte (0x00 = EU / 0x01 = China / 0x02 = Non-EU) | |
| # = 0x03 runtimeInfo 1Byte (0x01) | |
| # = 0x04 DeviceInfo 1Byte (0x01) | |
| # = 0x0B DOD 1Byte (0-100) | |
| # = 0x0C Entladeschwelle 2Byte (0-500) | |
| # = 0x0D PV2-Passtrough 1Byte (0x00 on / 0x01 off) | |
| # = 0x0E PowerOut 1Byte (0x00 1-2 off / 0x01 1 on / 0x02 2 on / 0x03 1-2 on) | |
| # | |
| # = 0x05 Wifi-Config xByte ( ssid<.,.>pwd ) | |
| # = 0x08 Wifi-State 1Byte (0x01) ???? | |
| # | |
| # q&d c&p - more details will be added, maybe ... | |
| # = 0x14 set AWS MQTT xByte ( url<.,.>Port ) .... | |
| # = 0x60 set MQTT Certs xByte ( 0x00 = client.key / 0x01 = client.crt / 0x02 = ca.crt + cert len ) | |
| # = 0x61 trans MQTT Certs xByte ( jeweils 128bytes des certs ) | |
| # = 0x62 end MQTT Certs xByte ( ) | |
| # | |
| # testing / notes | |
| # = 0x01 Debug ?!?! 1Byte (0x00 = off / 0x01 = on) - enables QBLEGATTSNOTIFY notify 1 / 81 ( entspricht ~ runtimeinfo ) | |
| # = 0x06 | |
| # = 0x07 | |
| # = 0x09 | |
| # = 0x0A | |
| # = 0x0E HW-RESET ????? / send before head 0XAA ( deactivate output ??? ) | |
| # = 0x0F new in fw 131 1Byte ( 0x01 ) | |
| # | |
| # = 0x30 found in logs ... unknown parm 0x01 ???? answers since fw 131 | |
| # = 0x14 maybe not for mqtt ... set localtime ??? for auth/certs/challenge requests ????? ( query/set wifi depends ????) | |
| # | |
| # data = xx xx xx xx xx xx .... / depends on cmd | |
| # crc = xor len(paket) - 1 | |
| # | |
| # | |
| # responses ( ff02 ): | |
| # | |
| # head = 0x73 | |
| # length = len(paket) | |
| # cntl = 0x23 | |
| # cmd = cmd | |
| # data = xx xx xx xx xx .... | |
| # | |
| # | |
| # | |
| ################ maybe direct for arm | |
| # send ( ff01 ) | |
| # | |
| # head1 = 0xAA | |
| # head2(?) = 0x55 ( not length ?!?!? ) | |
| # cmd = 1x / 2x / 3x ( flash - 30 "open"/ 31 - write / 32 "close" ) / 5x | |
| # data = xx xx xx xx xx .... | |
| # crc = xor len(paket) -1 | |
| # | |
| ################ maybe direct for bms | |
| # send/receive ( ff06 ) | |
| # | |
| # head = 0xAA | |
| # len = 0x05/0x03 | |
| # data = xx xx xxx ( xx xx ) | |
| # crc = x1 + x2 + ... + xn | |
| # | |
| # | |
| # | |
| # -> aa 05 01 00 01 01 00 08 | |
| # <- aa 01 00 01 | |
| # | |
| # -> aa 05 01 00 01 00 00 07 | |
| # <- aa 01 00 01 | |
| # | |
| - id: ble_command_simple | |
| parameters: | |
| ble_device_nr: int | |
| ble_cmd: int | |
| ble_cmd_parm: int | |
| then: | |
| - logger.log: | |
| format: "ble command parse: %i [%i] %i" | |
| args: [ 'ble_device_nr','ble_cmd','ble_cmd_parm' ] | |
| - if: | |
| condition: | |
| lambda: 'return (ble_device_nr == 1);' | |
| then: | |
| - ble_client.ble_write: | |
| id: bc2500_1 | |
| #service_uuid: 'ff00' | |
| #characteristic_uuid: 'ff01' | |
| service_uuid: 0000ff00-0000-1000-8000-00805f9b34fb | |
| characteristic_uuid: 0000ff01-0000-1000-8000-00805f9b34fb | |
| value: !lambda |- | |
| std::vector<unsigned char> rdat1{ 0x73,0x06,0x23,(unsigned char)ble_cmd}; | |
| if (ble_cmd == 0x0C) { | |
| rdat1.push_back((uint8_t)((ble_cmd_parm >> 0) & 0xFF)); | |
| rdat1.push_back((uint8_t)((ble_cmd_parm >> 8) & 0xFF)); | |
| } else { | |
| rdat1.push_back((unsigned char)ble_cmd_parm); | |
| } | |
| int rlen = rdat1.size(); | |
| rdat1.at(1) = rlen+1; | |
| int rxor = 0; | |
| for (int i=0;i<rlen;i++) { | |
| rxor = rxor ^ rdat1[i]; | |
| } | |
| rdat1.push_back(rxor); | |
| if (id(internal_console_dbg)) { | |
| for (auto b : rdat1) { | |
| ESP_LOGD("COMMAND", "%x - %i - %c", b,b,b); | |
| } | |
| } | |
| return rdat1; | |
| - if: | |
| condition: | |
| lambda: 'return (ble_device_nr == 2);' | |
| then: | |
| - ble_client.ble_write: | |
| id: bc2500_2 | |
| service_uuid: 'ff00' | |
| characteristic_uuid: 'ff01' | |
| value: !lambda |- | |
| std::vector<unsigned char> rdat2{ 0x73,0x06,0x23,(unsigned char)ble_cmd}; | |
| if (ble_cmd == 0x0C) { | |
| rdat2.push_back((uint8_t)((ble_cmd_parm >> 0) & 0xFF)); | |
| rdat2.push_back((uint8_t)((ble_cmd_parm >> 8) & 0xFF)); | |
| } else { | |
| rdat2.push_back((unsigned char)ble_cmd_parm); | |
| } | |
| int rlen = rdat2.size(); | |
| rdat2.at(1) = rlen+1; | |
| int rxor = 0; | |
| for (int i=0;i<rlen;i++) { | |
| rxor = rxor ^ rdat2[i]; | |
| } | |
| rdat2.push_back(rxor); | |
| if (id(internal_console_dbg)) { | |
| for (auto b : rdat2) { | |
| ESP_LOGD("COMMAND", "%x - %i - %c", b,b,b); | |
| } | |
| } | |
| return rdat2; | |
| - id: ble_command_string | |
| parameters: | |
| ble_device_nr: int | |
| ble_cmd: int | |
| ble_cmd_parm: string | |
| then: | |
| - logger.log: | |
| format: "ble command parse: %i [%i]" | |
| args: [ 'ble_device_nr','ble_cmd'] | |
| - if: | |
| condition: | |
| lambda: 'return (ble_device_nr == 1);' | |
| then: | |
| - ble_client.ble_write: | |
| id: bc2500_1 | |
| #service_uuid: 'ff00' | |
| #characteristic_uuid: 'ff01' | |
| service_uuid: 0000ff00-0000-1000-8000-00805f9b34fb | |
| characteristic_uuid: 0000ff01-0000-1000-8000-00805f9b34fb | |
| value: !lambda |- | |
| std::vector<unsigned char> rdat1{ 0x73,0x06,0x23,(unsigned char)ble_cmd}; | |
| for (auto b : ble_cmd_parm) { | |
| rdat1.push_back((unsigned char)b); | |
| } | |
| int rlen = rdat1.size(); | |
| rdat1.at(1) = rlen+1; | |
| int rxor = 0; | |
| for (int i=0;i<rlen;i++) { | |
| rxor = rxor ^ rdat1[i]; | |
| } | |
| rdat1.push_back(rxor); | |
| if (id(internal_console_dbg)) { | |
| for (auto b : rdat1) { | |
| ESP_LOGD("COMMAND", "%x - %i - %c", b,b,b); | |
| } | |
| } | |
| return rdat1; | |
| - if: | |
| condition: | |
| lambda: 'return (ble_device_nr == 2);' | |
| then: | |
| - ble_client.ble_write: | |
| id: bc2500_2 | |
| service_uuid: 'ff00' | |
| characteristic_uuid: 'ff01' | |
| #service_uuid: 0000ff00-0000-1000-8000-00805f9b34fb | |
| #characteristic_uuid: 0000ff01-0000-1000-8000-00805f9b34fb | |
| value: !lambda |- | |
| std::vector<unsigned char> rdat2{ 0x73,0x06,0x23,(unsigned char)ble_cmd}; | |
| for (auto b : ble_cmd_parm) { | |
| rdat2.push_back((unsigned char)b); | |
| } | |
| int rlen = rdat2.size(); | |
| rdat2.at(1) = rlen+1; | |
| int rxor = 0; | |
| for (int i=0;i<rlen;i++) { | |
| rxor = rxor ^ rdat2[i]; | |
| } | |
| rdat2.push_back(rxor); | |
| if (id(internal_console_dbg)) { | |
| for (auto b : rdat2) { | |
| ESP_LOGD("COMMAND", "%x - %i - %c", b,b,b); | |
| } | |
| } | |
| return rdat2; | |
| - id: ble_set_time | |
| parameters: | |
| ble_device_nr: int | |
| then: | |
| - if: | |
| condition: | |
| lambda: 'return (ble_device_nr == 1);' | |
| then: | |
| - ble_client.ble_write: | |
| id: bc2500_1 | |
| #service_uuid: 'ff00' | |
| #characteristic_uuid: 'ff01' | |
| service_uuid: 0000ff00-0000-1000-8000-00805f9b34fb | |
| characteristic_uuid: 0000ff01-0000-1000-8000-00805f9b34fb | |
| value: !lambda |- | |
| std::vector<unsigned char> rdat1{ 0x73,0x0d,0x23,0x14, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3c, 0x00 }; | |
| auto time = id(sntp_time).now(); | |
| rdat1.at(4) = time.year - 1900; | |
| rdat1.at(5) = time.month; | |
| rdat1.at(6) = time.day_of_month; | |
| rdat1.at(7) = time.hour; | |
| rdat1.at(8) = time.minute; | |
| rdat1.at(9) = time.second + 1; | |
| int rlen = rdat1.size(); | |
| rdat1.at(1) = rlen+1; | |
| int rxor = 0; | |
| for (int i=0;i<rlen;i++) { | |
| rxor = rxor ^ rdat1[i]; | |
| } | |
| rdat1.push_back(rxor); | |
| if (id(internal_console_dbg)) { | |
| for (auto b : rdat1) { | |
| ESP_LOGD("COMMAND", "%x - %i - %c", b,b,b); | |
| } | |
| } | |
| return rdat1; | |
| - globals.set: | |
| id: ble_1_initialized | |
| value: '1' | |
| - if: | |
| condition: | |
| lambda: 'return (ble_device_nr == 2);' | |
| then: | |
| - ble_client.ble_write: | |
| id: bc2500_2 | |
| service_uuid: 'ff00' | |
| characteristic_uuid: 'ff01' | |
| #service_uuid: 0000ff00-0000-1000-8000-00805f9b34fb | |
| #characteristic_uuid: 0000ff01-0000-1000-8000-00805f9b34fb | |
| value: !lambda |- | |
| std::vector<unsigned char> rdat2{ 0x73,0x0d,0x23,0x14, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3c, 0x00 }; | |
| auto time = id(sntp_time).now(); | |
| rdat2.at(4) = time.year - 1900; | |
| rdat2.at(5) = time.month; | |
| rdat2.at(6) = time.day_of_month; | |
| rdat2.at(7) = time.hour; | |
| rdat2.at(8) = time.minute; | |
| rdat2.at(9) = time.second + 1; | |
| int rlen = rdat2.size(); | |
| rdat2.at(1) = rlen+1; | |
| int rxor = 0; | |
| for (int i=0;i<rlen;i++) { | |
| rxor = rxor ^ rdat2[i]; | |
| } | |
| rdat2.push_back(rxor); | |
| if (id(internal_console_dbg)) { | |
| for (auto b : rdat2) { | |
| ESP_LOGD("COMMAND", "%x - %i - %c", b,b,b); | |
| } | |
| } | |
| return rdat2; | |
| - globals.set: | |
| id: ble_2_initialized | |
| value: '1' | |
| - id: ble_command_raw_06 | |
| parameters: | |
| ble_device_nr: int | |
| ble_cmd_parm: char[] | |
| then: | |
| - logger.log: | |
| format: "ble command parse (raw): %i" | |
| args: [ 'ble_device_nr'] | |
| - if: | |
| condition: | |
| lambda: 'return (ble_device_nr == 1);' | |
| then: | |
| - ble_client.ble_write: | |
| id: bc2500_1 | |
| #service_uuid: 'ff00' | |
| #characteristic_uuid: 'ff06' | |
| service_uuid: 0000ff00-0000-1000-8000-00805f9b34fb | |
| characteristic_uuid: 0000ff06-0000-1000-8000-00805f9b34fb | |
| value: !lambda |- | |
| std::vector<unsigned char> rdat1; | |
| for (auto b : ble_cmd_parm) { | |
| rdat1.push_back((unsigned char)b); | |
| } | |
| /* | |
| int rlen = rdat1.size(); | |
| rdat1.at(1) = rlen+1; | |
| int rxor = 0; | |
| for (int i=0;i<rlen;i++) { | |
| rxor = rxor ^ rdat1[i]; | |
| } | |
| rdat1.push_back(rxor); | |
| */ | |
| //if (id(internal_console_dbg)) { | |
| for (auto b : rdat1) { | |
| ESP_LOGD("COMMAND raw", "%x - %i - %c", b,b,b); | |
| } | |
| //} | |
| return rdat1; | |
| - if: | |
| condition: | |
| lambda: 'return (ble_device_nr == 2);' | |
| then: | |
| - ble_client.ble_write: | |
| id: bc2500_2 | |
| #service_uuid: 'ff00' | |
| #characteristic_uuid: 'ff06' | |
| service_uuid: 0000ff00-0000-1000-8000-00805f9b34fb | |
| characteristic_uuid: 0000ff06-0000-1000-8000-00805f9b34fb | |
| value: !lambda |- | |
| std::vector<unsigned char> rdat2; | |
| for (auto b : ble_cmd_parm) { | |
| rdat2.push_back((unsigned char)b); | |
| } | |
| /* | |
| int rlen = rdat2.size(); | |
| rdat2.at(1) = rlen+1; | |
| int rxor = 0; | |
| for (int i=0;i<rlen;i++) { | |
| rxor = rxor ^ rdat2[i]; | |
| } | |
| rdat2.push_back(rxor); | |
| */ | |
| //if (id(internal_console_dbg)) { | |
| for (auto b : rdat2) { | |
| ESP_LOGD("COMMAND raw", "%x - %i - %c", b,b,b); | |
| } | |
| //} | |
| return rdat2; | |
| - id: ble_process | |
| then: | |
| - if: | |
| condition: | |
| - lambda: 'return (id(ble_1_connected) && id(ble_1_initialized));' | |
| then: | |
| - script.execute: | |
| id: ble_runtime_query | |
| ble_device_nr: 1 | |
| - script.wait: ble_runtime_query | |
| ### query cmd30 if firmware > 1.30 | |
| - if: | |
| condition: | |
| - lambda: 'return (id(sensor_device_version_1).state * 100 > 130);' | |
| then: | |
| - script.execute: | |
| id: ble_runtime_query30 | |
| ble_device_nr: 1 | |
| - script.wait: ble_runtime_query30 | |
| - script.execute: | |
| id: ble_runtime_query0F | |
| ble_device_nr: 1 | |
| - script.wait: ble_runtime_query0F | |
| ### query deviceinfo if empty | |
| - if: | |
| condition: | |
| - lambda: 'return (id(txt_A03_1).state == "");' | |
| then: | |
| - script.execute: | |
| id: ble_command_simple | |
| ble_device_nr: 1 | |
| ble_cmd: 0x04 | |
| ble_cmd_parm: 0x01 | |
| - script.wait: ble_command_simple | |
| - if: | |
| condition: | |
| - lambda: 'return (id(ble_2_connected) && id(ble_2_initialized));' | |
| then: | |
| - script.execute: | |
| id: ble_runtime_query | |
| ble_device_nr: 2 | |
| - script.wait: ble_runtime_query | |
| ### query cmd30 if firmware > 1.30 | |
| - if: | |
| condition: | |
| - lambda: 'return (id(sensor_device_version_2).state * 100 > 130);' | |
| then: | |
| - script.execute: | |
| id: ble_runtime_query30 | |
| ble_device_nr: 2 | |
| - script.wait: ble_runtime_query30 | |
| - script.execute: | |
| id: ble_runtime_query0F | |
| ble_device_nr: 2 | |
| - script.wait: ble_runtime_query0F | |
| ### query deviceinfo if empty | |
| - if: | |
| condition: | |
| - lambda: 'return (id(txt_A03_2).state == "");' | |
| then: | |
| - script.execute: | |
| id: ble_command_simple | |
| ble_device_nr: 2 | |
| ble_cmd: 0x04 | |
| ble_cmd_parm: 0x01 | |
| - script.wait: ble_command_simple | |
| - id: ble_runtime_query | |
| parameters: | |
| ble_device_nr: int | |
| then: | |
| - logger.log: | |
| format: "runtime query: %i" | |
| args: [ 'ble_device_nr' ] | |
| - script.execute: | |
| id: ble_command_simple | |
| ble_device_nr: !lambda return ble_device_nr; | |
| ble_cmd: 0x03 | |
| ble_cmd_parm: 0x01 | |
| - script.wait: ble_command_simple | |
| - id: ble_runtime_query30 | |
| parameters: | |
| ble_device_nr: int | |
| then: | |
| - logger.log: | |
| format: "runtime query 30: %i" | |
| args: [ 'ble_device_nr' ] | |
| - script.execute: | |
| id: ble_command_simple | |
| ble_device_nr: !lambda return ble_device_nr; | |
| ble_cmd: 0x30 | |
| ble_cmd_parm: 0x01 | |
| - script.wait: ble_command_simple | |
| - id: ble_runtime_query0F | |
| parameters: | |
| ble_device_nr: int | |
| then: | |
| - logger.log: | |
| format: "runtime query 0F: %i" | |
| args: [ 'ble_device_nr' ] | |
| - script.execute: | |
| id: ble_command_simple | |
| ble_device_nr: !lambda return ble_device_nr; | |
| ble_cmd: 0x0F | |
| ble_cmd_parm: 0x01 | |
| - script.wait: ble_command_simple | |
| - id: ble_powerout | |
| parameters: | |
| ble_device_nr: int | |
| then: | |
| - lambda: |- | |
| int ble_cmd_t = 0x00; | |
| if ( ble_device_nr == 1 ) { | |
| if ( ! id(switch_powerout_1_1).state && ! id(switch_powerout_1_2).state ) { ble_cmd_t = 0x00; } | |
| if ( id(switch_powerout_1_1).state && ! id(switch_powerout_1_2).state ) { ble_cmd_t = 0x01; } | |
| if ( ! id(switch_powerout_1_1).state && id(switch_powerout_1_2).state ) { ble_cmd_t = 0x02; } | |
| if ( id(switch_powerout_1_1).state && id(switch_powerout_1_2).state ) { ble_cmd_t = 0x03; } | |
| } | |
| if ( ble_device_nr == 2 ) { | |
| if ( ! id(switch_powerout_2_1).state && ! id(switch_powerout_2_2).state ) { ble_cmd_t = 0x00; } | |
| if ( id(switch_powerout_2_1).state && ! id(switch_powerout_2_2).state ) { ble_cmd_t = 0x01; } | |
| if ( ! id(switch_powerout_2_1).state && id(switch_powerout_2_2).state ) { ble_cmd_t = 0x02; } | |
| if ( id(switch_powerout_2_1).state && id(switch_powerout_2_2).state ) { ble_cmd_t = 0x03; } | |
| } | |
| id(ble_command_simple).execute(ble_device_nr,0x0E,ble_cmd_t); | |
| if (ble_cmd_t == 0x00) { ESP_LOGD("set_power_out", "Device %i - %s", ble_device_nr,"1 OFF / 2 OFF"); } | |
| if (ble_cmd_t == 0x01) { ESP_LOGD("set_power_out", "Device %i - %s", ble_device_nr,"1 ON / 2 OFF"); } | |
| if (ble_cmd_t == 0x02) { ESP_LOGD("set_power_out", "Device %i - %s", ble_device_nr,"1 OFF / 2 ON"); } | |
| if (ble_cmd_t == 0x03) { ESP_LOGD("set_power_out", "Device %i - %s", ble_device_nr,"1 ON / 2 ON"); } | |
| - id: ble_passthrough | |
| parameters: | |
| ble_device_nr: int | |
| switch_cmd: bool | |
| then: | |
| - logger.log: | |
| format: "PV2 Passthrough %i : %i" | |
| args: [ble_device_nr,switch_cmd] | |
| - script.execute: | |
| id: ble_command_simple | |
| ble_device_nr: !lambda return ble_device_nr; | |
| ble_cmd: 0x0D | |
| ble_cmd_parm: !lambda return switch_cmd; | |
| - id: ble_set_dod | |
| parameters: | |
| ble_device_nr: int | |
| dod: int | |
| then: | |
| - logger.log: | |
| format: "set DOD: %i" | |
| args: [ 'dod' ] | |
| - if: | |
| condition: | |
| lambda: 'return ( dod <= 100 && dod >= 10);' | |
| then: | |
| - script.execute: | |
| id: ble_command_simple | |
| ble_device_nr: !lambda return ble_device_nr; | |
| ble_cmd: 0x0B | |
| ble_cmd_parm: !lambda return dod; | |
| - id: ble_set_discharge_treshold | |
| parameters: | |
| ble_device_nr: int | |
| discharge: int | |
| then: | |
| - logger.log: | |
| format: "set discharge level: %i" | |
| args: [ 'discharge' ] | |
| - if: | |
| condition: | |
| lambda: 'return ( discharge <= 500 && discharge >= 1);' | |
| then: | |
| - script.execute: | |
| id: ble_command_simple | |
| ble_device_nr: !lambda return ble_device_nr; | |
| ble_cmd: 0x0C | |
| ble_cmd_parm: !lambda return discharge; | |
| - id: ble_notify_parse_test | |
| parameters: | |
| ble_device_nr: int | |
| x: char[] | |
| then: | |
| - logger.log: | |
| format: "runtime parse: %i" | |
| args: [ 'ble_device_nr' ] | |
| - lambda: |- | |
| //if (id(internal_console_dbg)) { | |
| ESP_LOGD("parse test", "x[3] = %i", x[3]); | |
| for (auto b : x) { | |
| ESP_LOGD("data test", "%.2x \t %i \t %c", b,b,b); | |
| } | |
| //} | |
| - id: ble_notify_parse | |
| parameters: | |
| ble_device_nr: int | |
| x: char[] | |
| then: | |
| - logger.log: | |
| format: "runtime parse: %i" | |
| args: [ 'ble_device_nr' ] | |
| - lambda: |- | |
| ESP_LOGD("notify_parse", "Device: %i", ble_device_nr); | |
| if (id(internal_console_dbg)) { | |
| ESP_LOGD("parse", "x[3] = %i", x[3]); | |
| for (auto b : x) { | |
| ESP_LOGD("data", "%.2x \t %i \t %c", b,b,b); | |
| } | |
| } | |
| if (id(switch_debug_hexdump).state == true) { | |
| ESP_LOG_BUFFER_HEXDUMP("hexdump", &x[0], x.size(), ESP_LOG_ERROR); | |
| } | |
| if ((std::count (x.begin(), x.end(), '_') == 16) || (std::count (x.begin(), x.begin() + 10, '_') == 3)) | |
| { | |
| ESP_LOGD("main", "Data: cmd 0x0F"); | |
| int pos = 0; | |
| int soc = 0; | |
| int t1 = 0; | |
| int t2 = 0; | |
| float cv = 0.0; | |
| float cmin = std::numeric_limits<float>::max(); | |
| float cmax = std::numeric_limits<float>::min(); | |
| float ct = 0.0; | |
| int found = -1; | |
| char delimiter = '_'; | |
| std::string xstr; | |
| std::vector<float> cellV; | |
| xstr.assign(x.begin(), x.end()); // copy values from vector into string xstr, deep copy | |
| xstr = xstr + delimiter; // append delimiter to xstr | |
| found = xstr.find(delimiter); // search for position of the first delimiter | |
| while (found != -1) // loop until no more delimiter found | |
| { | |
| if(pos == 0) soc = atoi( xstr.substr(0, found).c_str()); // pos 0 don't care | |
| if(pos == 1) t1 = atoi( xstr.substr(0, found).c_str()); // pos 1 get int value of temperature sensor 1 | |
| if(pos == 2) t2 = atoi( xstr.substr(0, found).c_str()); // pos 2 get int value of temperature sensor 2 | |
| if((pos >= 3) && (pos <= 16)) // pos 3-16 parse pos for the 14 cell voltages | |
| { | |
| ct = atof( xstr.substr(0, found).c_str()); // get float value of pos x | |
| cellV.push_back(ct); | |
| //ESP_LOGD("cell voltage", ct.c_str()); | |
| cv += ct; // add actual value to var cv | |
| if(ct > cmax) cmax = ct; // check for higher value as stored in cmax | |
| if(ct < cmin) cmin = ct; // check for lower value as stored in cmin | |
| } | |
| xstr.erase(xstr.begin(), xstr.begin() + found + 1); // remove parsed string part | |
| found = xstr.find(delimiter); // find next delimiter | |
| pos++; // increment pos | |
| } | |
| /* calculate SoC from cell voltages | |
| cell empty = 3.0 Volt = 0% SoC | |
| cell full = 3.5 Volt = 100% SoC | |
| */ | |
| // float soccalc = (cv/14000 - 3.0) * 200; | |
| float lowlimit = 3.0; // low voltage limit | |
| float highlimit = 3.5; // high voltage limit | |
| float soccalc = 100*((cv/14000) | |
| - highlimit)/(highlimit - lowlimit) + 100; // equation of line with two points (0,lowlimit) (100,highlimit) | |
| ESP_LOGD("cellVoltage","soc: %i, temp1: %i, temp2: %i",soc,t1,t2); | |
| ESP_LOGD("cellVoltage","cell01: %.f, cell 02: %.f, cell 03: %.f, cell 04: %.f", cellV[0], cellV[1], cellV[2], cellV[3]); | |
| ESP_LOGD("cellVoltage","cell05: %.f, cell 06: %.f, cell 07: %.f, cell 08: %.f", cellV[4], cellV[5], cellV[6], cellV[7]); | |
| ESP_LOGD("cellVoltage","cell09: %.f, cell 10: %.f, cell 11: %.f, cell 12: %.f", cellV[8], cellV[9], cellV[10], cellV[11]); | |
| ESP_LOGD("cellVoltage","cell13: %.f, cell 14: %.f", cellV[12], cellV[13]); | |
| char mtopic[48]; | |
| for (int i=0; i<14; i++) { | |
| snprintf(mtopic, 48,"b2500/%i/battery/cells/%02d/voltage",ble_device_nr,i+1); | |
| //ESP_LOGD("cellVoltageX","%s : %f", mtopic, cellV[i]); | |
| id(mqtt_client).publish(mtopic,to_string(cellV[i]/1000)); | |
| } | |
| snprintf(mtopic, 48,"b2500/%i/battery/cells/sum/voltage",ble_device_nr); | |
| id(mqtt_client).publish(mtopic,to_string(cv/1000)); | |
| snprintf(mtopic, 48,"b2500/%i/battery/cells/sum/cmin",ble_device_nr); | |
| id(mqtt_client).publish(mtopic,to_string(cmin/1000)); | |
| snprintf(mtopic, 48,"b2500/%i/battery/cells/sum/cmax",ble_device_nr); | |
| id(mqtt_client).publish(mtopic,to_string(cmax/1000)); | |
| snprintf(mtopic, 48,"b2500/%i/battery/cells/sum/cavg",ble_device_nr); | |
| id(mqtt_client).publish(mtopic,to_string(cv/14000)); | |
| snprintf(mtopic, 48,"b2500/%i/battery/cells/sum/cdiff",ble_device_nr); | |
| id(mqtt_client).publish(mtopic,to_string((cmax-cmin)/1000)); | |
| snprintf(mtopic, 48,"b2500/%i/battery/cells/sum/soccalc",ble_device_nr); | |
| id(mqtt_client).publish(mtopic,to_string(soccalc)); | |
| snprintf(mtopic, 48,"b2500/%i/battery/temp1",ble_device_nr); | |
| id(mqtt_client).publish(mtopic,to_string(t1)); | |
| snprintf(mtopic, 48,"b2500/%i/battery/temp2",ble_device_nr); | |
| id(mqtt_client).publish(mtopic,to_string(t2)); | |
| /* | |
| id(bcsoc).publish_state(soc); // SOC from device (%) | |
| id(bcsoccalc).publish_state(soccalc); // SOC calculated from cell voltages (%) | |
| id(bctemp1).publish_state(t1); // Temperature 1 (°C) | |
| id(bctemp2).publish_state(t2); // Temperature 2 (°C) | |
| id(bccvsum).publish_state(cv/1000); // sum of cellvoltages = battery Voltage(V) | |
| id(bccvmin).publish_state(cmin/1000); // lowest cellvoltage (V) | |
| id(bccvmax).publish_state(cmax/1000); // highest cellvoltage (V) | |
| id(bccvdiff).publish_state((cmax-cmin)/1000); | |
| id(bccvavg).publish_state(cv/14000); // avarage cellvoltage (V) | |
| */ | |
| } | |
| else if (x[3] == 0x03) { | |
| ESP_LOGD("main", "Data: runtimeInfo "); | |
| //sensor | |
| // pv_level 1 und 2 | |
| /* | |
| [6][7] PV-Eingangsleistung 1 (2Byte) | |
| [8][9] PV-Eingangsleistung 2 (2Byte) | |
| x[Y] | x[Z] << 8; | |
| */ | |
| int pvPower1 = x[6] | x[7] << 8; | |
| int pvPower2 = x[8] | x[9] << 8; | |
| if (ble_device_nr==1) { id(sensor_pv_power_in_1_1).publish_state(pvPower1); id(sensor_pv_power_in_1_2).publish_state(pvPower2); } | |
| if (ble_device_nr==2) { id(sensor_pv_power_in_2_1).publish_state(pvPower1); id(sensor_pv_power_in_2_2).publish_state(pvPower2); } | |
| // Batterie Stand in % | |
| /* | |
| [10][11] Verbleibende Batteriekapazität in Prozent (2Byte) | |
| x[Y] | x[Z] << 8; | |
| */ | |
| int batRemain = x[10] | x[11] << 8 ; | |
| if (ble_device_nr==1) { id(sensor_bat_remain_1).publish_state(batRemain / 10); } | |
| if (ble_device_nr==2) { id(sensor_bat_remain_2).publish_state(batRemain / 10); } | |
| // Entladen bei weniger als ??? Watt PV Eingang | |
| /* | |
| [19][20] Entladeschwelle(2Byte) | |
| x[Y] | x[Z] << 8; | |
| */ | |
| int disCharge = x[19] | x[20] << 8; | |
| if (ble_device_nr==1) { id(sensor_discharge_treshold_1).publish_state(disCharge); } | |
| if (ble_device_nr==2) { id(sensor_discharge_treshold_2).publish_state(disCharge); } | |
| // Füllstand des Akkus in Wh | |
| /* | |
| [22][23] Gesamtkapazität der Batterie (1Byte) | |
| x[Y] | x[Z] << 8; | |
| */ | |
| int batCapacity = x[22] | x[23] << 8; | |
| if (ble_device_nr==1) { id(sensor_bat_capacity_1).publish_state(batCapacity); } | |
| if (ble_device_nr==2) { id(sensor_bat_capacity_2).publish_state(batCapacity); } | |
| // Ausgangsleistung in Watt | |
| /* | |
| [24][25] Ausgangsleistung 1(1Byte) | |
| [26][27] Ausgangsleistung 2(1Byte) | |
| x[Y] | x[Z] << 8; | |
| */ | |
| int powerOut1 = x[24] | x[25] << 8; | |
| int powerOut2 = x[26] | x[27] << 8; | |
| if (ble_device_nr==1) { id(sensor_power_out_1_1).publish_state(powerOut1); id(sensor_power_out_1_2).publish_state(powerOut2); } | |
| if (ble_device_nr==2) { id(sensor_power_out_2_1).publish_state(powerOut1); id(sensor_power_out_2_2).publish_state(powerOut2); } | |
| // Geräte Version ( Firmware ? ) | |
| /* | |
| [12] B2500 Geräteversion (1Byte) | |
| 0-255 ( ~ anzeige als /100 ) | |
| */ | |
| float dev_version = x[12]; | |
| if (ble_device_nr==1) { id(sensor_device_version_1).publish_state(dev_version / 100); } | |
| if (ble_device_nr==2) { id(sensor_device_version_2).publish_state(dev_version / 100); } | |
| // | |
| /* | |
| [18] Dod (1Byte) | |
| 0-100 Prozentualer Anteil der Entladeleistung an der Nennleistung | |
| */ | |
| int dod_level = x[18]; | |
| if (ble_device_nr==1) { id(sensor_dod_1).publish_state(dod_level); } | |
| if (ble_device_nr==2) { id(sensor_dod_2).publish_state(dod_level); } | |
| // binary sensor / bool | |
| // pv 1 und 2 in | |
| /* | |
| [x4] PV IN 1 Zustand (1Byte) | |
| [x5] PV IN 2 Zustand (1Byte) | |
| 0x00 （off） | |
| 0x01 （Aufladung） | |
| 0x02 （transparent für Wechselrichter） | |
| */ | |
| if (ble_device_nr==1) { | |
| if( x[4] == 0x00 ) { id(bool_pv_active_1_1).publish_state(false);id(bool_pv_transparent_1_1).publish_state(false); } | |
| if( x[4] == 0x01 ) { id(bool_pv_active_1_1).publish_state(true); id(bool_pv_transparent_1_1).publish_state(false); } | |
| if( x[4] == 0x02 ) { id(bool_pv_active_1_1).publish_state(true); id(bool_pv_transparent_1_1).publish_state(true); } | |
| if( x[5] == 0x00 ) { id(bool_pv_active_1_2).publish_state(false);id(bool_pv_transparent_1_2).publish_state(false); } | |
| if( x[5] == 0x01 ) { id(bool_pv_active_1_2).publish_state(true); id(bool_pv_transparent_1_2).publish_state(false); } | |
| if( x[5] == 0x02 ) { id(bool_pv_active_1_2).publish_state(true); id(bool_pv_transparent_1_2).publish_state(true); } | |
| } | |
| if (ble_device_nr==2) { | |
| if( x[4] == 0x00 ) { id(bool_pv_active_2_1).publish_state(false);id(bool_pv_transparent_2_1).publish_state(false); } | |
| if( x[4] == 0x01 ) { id(bool_pv_active_2_1).publish_state(true); id(bool_pv_transparent_2_1).publish_state(false); } | |
| if( x[4] == 0x02 ) { id(bool_pv_active_2_1).publish_state(true); id(bool_pv_transparent_2_1).publish_state(true); } | |
| if( x[5] == 0x00 ) { id(bool_pv_active_2_2).publish_state(false);id(bool_pv_transparent_2_2).publish_state(false); } | |
| if( x[5] == 0x01 ) { id(bool_pv_active_2_2).publish_state(true); id(bool_pv_transparent_2_2).publish_state(false); } | |
| if( x[5] == 0x02 ) { id(bool_pv_active_2_2).publish_state(true); id(bool_pv_transparent_2_2).publish_state(true); } | |
| } | |
| // pv 2 durchleiten | |
| /* | |
| [13] Einstellung des Ladevorgangs (1Byte) | |
| 0x00 （PV1 Aufladung PV2 Durchleitung） | |
| 0x01 （Volles Laden und Entladen） | |
| */ | |
| if (ble_device_nr==1) { | |
| if( x[13] == 0x00 ) { id(switch_pv2_passthrough_1).turn_on(); } | |
| if( x[13] == 0x01 ) { id(switch_pv2_passthrough_1).turn_off(); } | |
| } | |
| if (ble_device_nr==2) { | |
| if( x[13] == 0x00 ) { id(switch_pv2_passthrough_2).turn_on(); } | |
| if( x[13] == 0x01 ) { id(switch_pv2_passthrough_2).turn_off(); } | |
| } | |
| // RESERVED ( wifi / mqtt ) | |
| /* | |
| [15] Reserve(1Byte) | |
| 0x00 wifi funktioniert nicht | |
| 0x01 wifi ok, mqtt nicht verbunden | |
| 0x02 wifi ok, mqtt connect ok | |
| ??? 0x03 wifi ok, mqtt1 connect ok, mqtt2 connect ok | |
| maybe wifi / mqtt | |
| 00 = false / false | |
| 01 = true / false | |
| 02 = false / true | |
| 03 = true / true | |
| ------- | |
| first part means not wifi connected ?!?!? | |
| 00 = ??? / mqtt not connected | |
| 01 = ??? / mqtt not connected | |
| 02 = ??? / mqtt connected | |
| 03 = ??? / mqtt connected | |
| */ | |
| // wifi and mqtt, 03 maybe webserver | |
| if (ble_device_nr==1) { | |
| if( x[15] == 0x00 ) { id(bool_wifi_ok_1).publish_state(false); id(bool_mqtt1_ok_1).publish_state(false); } | |
| if( x[15] == 0x01 ) { id(bool_wifi_ok_1).publish_state(true); id(bool_mqtt1_ok_1).publish_state(false);} | |
| if( x[15] == 0x02 ) { id(bool_wifi_ok_1).publish_state(false); id(bool_mqtt1_ok_1).publish_state(true); } | |
| if( x[15] == 0x03 ) { id(bool_wifi_ok_1).publish_state(true); id(bool_mqtt1_ok_1).publish_state(true); } | |
| } | |
| if (ble_device_nr==2) { | |
| if( x[15] == 0x00 ) { id(bool_wifi_ok_2).publish_state(false); id(bool_mqtt1_ok_2).publish_state(false); } | |
| if( x[15] == 0x01 ) { id(bool_wifi_ok_2).publish_state(true); id(bool_mqtt1_ok_2).publish_state(false); } | |
| if( x[15] == 0x02 ) { id(bool_wifi_ok_2).publish_state(false); id(bool_mqtt1_ok_2).publish_state(true); } | |
| if( x[15] == 0x03 ) { id(bool_wifi_ok_2).publish_state(true); id(bool_mqtt1_ok_2).publish_state(true); } | |
| } | |
| // power 1 und 2 enabled/disabled | |
| /* | |
| [14] Entlade-Modus / Enabled (1Byte) | |
| 0x00 OUT1&OUT2 Sperren | |
| 0x01 nur OUT1 Freigabe | |
| 0x02 nur OUT2 Freigabe | |
| 0x03 OUT1&OUT2 Freigabe | |
| */ | |
| if (ble_device_nr==1) { | |
| if( x[14] == 0x00 ) { id(switch_powerout_1_1).turn_off(); id(switch_powerout_1_2).turn_off();} | |
| if( x[14] == 0x01 ) { id(switch_powerout_1_1).turn_on(); id(switch_powerout_1_2).turn_off();} | |
| if( x[14] == 0x02 ) { id(switch_powerout_1_1).turn_off(); id(switch_powerout_1_2).turn_on(); } | |
| if( x[14] == 0x03 ) { id(switch_powerout_1_1).turn_on(); id(switch_powerout_1_2).turn_on(); } | |
| } | |
| if (ble_device_nr==2) { | |
| if( x[14] == 0x00 ) { id(switch_powerout_2_1).turn_off(); id(switch_powerout_2_2).turn_off();} | |
| if( x[14] == 0x01 ) { id(switch_powerout_2_1).turn_on(); id(switch_powerout_2_2).turn_off();} | |
| if( x[14] == 0x02 ) { id(switch_powerout_2_1).turn_off(); id(switch_powerout_2_2).turn_on(); } | |
| if( x[14] == 0x03 ) { id(switch_powerout_2_1).turn_on(); id(switch_powerout_2_2).turn_on(); } | |
| } | |
| // power 1 und 2 active | |
| /* | |
| [16] Ausgang Port 1 Status (1Byte) | |
| [17] Ausgang Port 2 Status (1Byte) | |
| 0x00（Aus） | |
| 0x01（Entladung） | |
| */ | |
| if (ble_device_nr==1) { | |
| if( x[16] == 0x00 ) { id(bool_power_active_1_1).publish_state(false);} | |
| if( x[16] == 0x01 ) { id(bool_power_active_1_1).publish_state(true); } | |
| if( x[17] == 0x00 ) { id(bool_power_active_1_2).publish_state(false);} | |
| if( x[17] == 0x01 ) { id(bool_power_active_1_2).publish_state(true); } | |
| } | |
| if (ble_device_nr==2) { | |
| if( x[16] == 0x00 ) { id(bool_power_active_2_1).publish_state(false);} | |
| if( x[16] == 0x01 ) { id(bool_power_active_2_1).publish_state(true); } | |
| if( x[17] == 0x00 ) { id(bool_power_active_2_2).publish_state(false);} | |
| if( x[17] == 0x01 ) { id(bool_power_active_2_2).publish_state(true); } | |
| } | |
| // zusatzakku 1 und 2 | |
| /* | |
| [28] Ist Netzgerät 1 angeschlossen (1Byte) | |
| [29] Ist Netzgerät 2 angeschlossen (1Byte) | |
| 0x00（Kein Akkupack angeschlossen） | |
| 0x01（Verbinden Sie das Netzteil） | |
| */ | |
| if (ble_device_nr==1) { | |
| if( x[28] == 0x00 ) { id(bool_extern_connected_1_1).publish_state(false);} | |
| if( x[28] == 0x01 ) { id(bool_extern_connected_1_1).publish_state(true); } | |
| if( x[29] == 0x00 ) { id(bool_extern_connected_1_2).publish_state(false);} | |
| if( x[29] == 0x01 ) { id(bool_extern_connected_1_2).publish_state(true); } | |
| } | |
| if (ble_device_nr==2) { | |
| if( x[28] == 0x00 ) { id(bool_extern_connected_2_1).publish_state(false);} | |
| if( x[28] == 0x01 ) { id(bool_extern_connected_2_1).publish_state(true); } | |
| if( x[29] == 0x00 ) { id(bool_extern_connected_2_2).publish_state(false);} | |
| if( x[29] == 0x01 ) { id(bool_extern_connected_2_2).publish_state(true); } | |
| } | |
| if (ble_device_nr==1) { | |
| auto call_21 = id(txt_scene_1).make_call(); | |
| if( x[21] == 0x00 ) { call_21.set_value("Tag"); } | |
| if( x[21] == 0x01 ) { call_21.set_value("Nacht"); } | |
| if( x[21] == 0x02 ) { call_21.set_value("Morgens/Abends"); } | |
| call_21.perform(); | |
| } | |
| if (ble_device_nr==2) { | |
| auto call_21 = id(txt_scene_2).make_call(); | |
| if( x[21] == 0x00 ) { call_21.set_value("Tag"); } | |
| if( x[21] == 0x01 ) { call_21.set_value("Nacht"); } | |
| if( x[21] == 0x02 ) { call_21.set_value("Morgens/Abends"); } | |
| call_21.perform(); | |
| } | |
| if (ble_device_nr==1) { | |
| auto call_30 = id(txt_region_1).make_call(); | |
| if( x[30] == 0x00 ) { call_30.set_value("EU"); } | |
| if( x[30] == 0x01 ) { call_30.set_value("China"); } | |
| if( x[30] == 0x02 ) { call_30.set_value("non-EU"); } | |
| call_30.perform(); | |
| } | |
| if (ble_device_nr==2) { | |
| auto call_30 = id(txt_region_2).make_call(); | |
| if( x[30] == 0x00 ) { call_30.set_value("EU"); } | |
| if( x[30] == 0x01 ) { call_30.set_value("China"); } | |
| if( x[30] == 0x02 ) { call_30.set_value("non-EU"); } | |
| call_30.perform(); | |
| } | |
| } | |
| else if (x[3] == 0x04) { | |
| ESP_LOGD("main", "Data: deviceInfo "); | |
| //for (auto b : x) { | |
| // ESP_LOGD("data", "%i", b); | |
| //} | |
| // 's<#?type=<5>,id=<24>,mac=<12>t' | |
| // ESP_LOGD("data", "%s", vType); | |
| int data_len = x.size(); | |
| unsigned char vType[8]; | |
| for (int i=9;i<14;i++) { | |
| vType[i-9] = x[i]; | |
| } | |
| vType[5] = 0x00; | |
| unsigned char vID[32]; | |
| for (int i=18;i<42;i++) { | |
| vID[i-18] = x[i]; | |
| } | |
| vID[24]=0x00; | |
| unsigned char vMac[16]; | |
| for (int i=47;i<59;i++) { | |
| vMac[i-47] = x[i]; | |
| } | |
| vMac[12] = 0x00; | |
| ESP_LOGD("deviceInfo", "%i: %s [%s] %s", data_len,vType,vMac,vID); | |
| std::string sType(reinterpret_cast<char*>(vType)); | |
| std::string sID(reinterpret_cast<char*>(vID)); | |
| std::string sMac(reinterpret_cast<char*>(vMac)); | |
| if (ble_device_nr==1) { id(txt_A01_1).publish_state(sType); id(txt_A02_1).publish_state(sID); id(txt_A03_1).publish_state(sMac); } | |
| if (ble_device_nr==2) { id(txt_A01_2).publish_state(sType); id(txt_A02_2).publish_state(sID); id(txt_A03_2).publish_state(sMac); } | |
| } | |
| // get wifi info - "admin mode" only | |
| else if (x[3] == 0x08) { | |
| ESP_LOGD("main", "Data: wifiInfo "); | |
| int data_len = x.size(); | |
| unsigned char vSSID[32]; | |
| for (int i=4;i<data_len-1;i++) { | |
| vSSID[i-4] = x[i]; | |
| } | |
| vSSID[data_len-5] = 0x00; | |
| ESP_LOGD("deviceInfo", "%i: %s", data_len,vSSID); | |
| std::string sSSID(reinterpret_cast<char*>(vSSID)); | |
| if (ble_device_nr==1) { id(txt_A11_1).publish_state(sSSID); } | |
| if (ble_device_nr==2) { id(txt_A11_2).publish_state(sSSID); } | |
| for (auto b : x) { | |
| ESP_LOGD("data", "%x \t %i \t %x", b,b,b); | |
| } | |
| } | |
| else if (x[3] == 0x30) { | |
| ESP_LOGD("main", "Data: cmd 0x30 "); | |
| int data_len = x.size(); | |
| int data_pos = 0; | |
| int rxor = 0; | |
| for (int i=0;i<data_len;i++) { | |
| rxor = rxor ^ x[i]; | |
| } | |
| /* | |
| //if( rxor != id(cmd30_xor_last_1) ) { | |
| ESP_LOGD("data 30 - raw" , "Device %i",ble_device_nr); | |
| ESP_LOGD("data 30 - raw" , "0x%.2x 0x%.2x 0x%.2x 0x%.2x", x[0], x[1], x[2], x[3]); | |
| for(int i=4;i<data_len-1;i++) { | |
| ESP_LOGD("data 30 - raw" , "0x%.2x 0x%.2x 0x%.2x 0x%.2x 0x%.2x 0x%.2x 0x%.2x 0x%.2x 0x%.2x", x[i], x[i+1], x[i+2], x[i+3], x[i+4],x[i+5],x[i+6],x[i+7],x[i+8]); | |
| i += 8; | |
| } | |
| //ESP_LOGD("data 30 - raw" , " "); | |
| id(cmd30_xor_last_1) = rxor; | |
| //} | |
| */ | |
| } | |
| /* | |
| else if (x[3] == 0x30) { | |
| ESP_LOGD("main", "Data: cmd 0x30"); | |
| int data_len = x.size(); | |
| for(int i=0;i<data_len;i++) { | |
| int d1 = x[i]; | |
| ESP_LOGD("data 30" , "%x \t %i \t %c" , d1, d1, char(d1)); | |
| } | |
| } | |
| */ | |
| // debug ??? | |
| else if (x[3] == 0x01) { | |
| ESP_LOGD("main", "Data: cmd 0x01"); | |
| int data_len = x.size(); | |
| for(int i=0;i<data_len;i++) { | |
| int d1 = x[i]; | |
| ESP_LOGD("data 01" , "%x \t %i \t %c" , d1, d1, char(d1)); | |
| } | |
| } | |
| else if (x[3] == 0x81) { | |
| ESP_LOGD("main", "Data: cmd 0x81"); | |
| int data_len = x.size(); | |
| for(int i=0;i<data_len;i++) { | |
| int d1 = x[i]; | |
| ESP_LOGD("data 81" , "%x \t %i \t %c" , d1, d1, char(d1)); | |
| } | |
| } | |
| else { | |
| /*int data_len = x.size(); | |
| for(int i=0;i<data_len;i++) { | |
| int d1 = x[i]; | |
| ESP_LOGD("unknown" , "%x \t %i \t %c" , d1, d1, char(d1)); | |
| } | |
| */ | |
| ESP_LOG_BUFFER_HEXDUMP("hexdump", &x[0], x.size(), ESP_LOG_ERROR); | |
| } | |
| - id: power_zero | |
| then: | |
| ### Nulleinspeisung - Powerzero by neromatrix | |
| ### - mqtt only adaption by noone2k | |
| ### first attempt, use at your own risk ! | |
| ### Ver. 0.01m | |
| - lambda: |- | |
| if(id(switch_opendtu_limit).state) | |
| { | |
| int ptu_min_value = 5; | |
| int ptu_max_value = id(mqtt_opendtu_limit_max).state; // 50; // <- nax rel value -> id(npw2500_zeropower_max_powerlimit_rel).state; | |
| int ptu_limit = 0; | |
| int ptu_max_power = 900; // max:2 (x:4*2 for 4port using 2port) | |
| int grid_to_ptu_ratio = ptu_max_power/100; | |
| int grid_min_value = 20; | |
| static int ptu_old_limit = 0; | |
| /* | |
| <- actual power mqtt -> prev. int(id(npw2500_grid_power).state); | |
| keep over grid_min_value | |
| */ | |
| int grid_value = int(id(mqtt_grid_power).state) - grid_min_value;; | |
| ptu_limit = grid_value / grid_to_ptu_ratio + ptu_old_limit; | |
| if(ptu_limit > ptu_max_value) ptu_limit = ptu_max_value; | |
| if(ptu_limit < ptu_min_value) ptu_limit = ptu_min_value; | |
| // change only if diff more than +/-1% | |
| if ( ptu_limit - ptu_old_limit > 1 || ptu_old_limit - ptu_limit > 1 ) { | |
| ESP_LOGD("npw2500","PowerZero PTU old limit %d, PTU new limit %d, Grid value %d " ,ptu_old_limit, ptu_limit, grid_value); | |
| ptu_old_limit = ptu_limit; | |
| //char mtopic[64]; | |
| //snprintf(mtopic, 64,"openDTU/XXXXXXXXXXX/cmd/limit_persistent_relative"); | |
| //id(mqtt_client).publish(mtopic,to_string(ptu_limit)); | |
| id(mqtt_opendtu_limit).publish_state(ptu_limit); | |
| } | |
| } |
Whoooohoooo !
Der Tipp mit dem Feedback ist 1a 😎 Innerhalb weniger Minuten war die „alte“ Version bereit gelegt. Kann ich jedem nur empfehlen diesen Weg zu gehen anstatt die armen Supporter bei Schuss zu behelligen 😉
Danke erstmal im voraus für die Umsetzung des Projekts :)
Kurze Frage zum Reboot des ESP via MQTT:
`button:
- platform: restart
id: controller_restart
name: "Restart Controller"
command_topic: b2500/esp32/reboot/set`
Was sende ich als Payload an das o.a. Topic?
OpenHAB sendet für einen Switch ja "ON", aber da bekomme ich folgende Nachricht "[mqtt.button:023]: 'Restart Controller': Received unknown status payload: ON"
Auch wenn ich ein press oder set schicke, dann tut sich nichts.
Was schickt Dein OpenHab?
PRESS
//edit
in der page sieht der code bei mir dann so aus:
- component: oh-list-item
config:
action: command
actionCommand: PRESS
actionItem: B2500_b2500__esp32__reboot
listButton: true
title: ESP32 - Reboot
resultat auf der page:
pic link funktioniert mal wieder nicht ... pic in next post
vllt. noch etwas grundsätzlicher:
bei buttons definierst du am besten den channel/item in OH als string ... ( wenn man bspw. esphome verwendet )
wenn du den button dann "drücken" willst, sendest du "PRESS" an das item ...
So close, but yet too far...
Astrein, das klappt! Danke :)
Case-sensitive war im Nachhinein ja mal wieder klar, hatte es nur mit dem kleinen "press" versucht.
Ich mach sowas gerne mit nem Custom On/Open Value, wenn nötig:
Das ist genau der springende Punkt !
Es muß einmal die Eingangsleistung durch die Entladeschwelle laufen dann geht es wieder an. Nur ist halt die nicht fix und ändert sich jede Sekunde was zur Folge hat das man hier äußerst variabel eingreifen muß. In meinen Augen völliger Mist, Sorry. Da hätten sie lieber einen Schalter einbauen können ob man die Funktion will oder nicht. Meinetwegen z.B. einen Wert von -1 einstellen der es disabled.
Ich glaube, da habe ich mich etwas unglücklich ausgedrückt. Ich meinte nicht, das die Entladeschwelle jedesmal bei ner Veränderung neu gesetzt werden sollte, sondern nur einmal bei vollem Akku und zwar auf den Wert, der ungefähr deinem minimalsten Hausverbrauch tagsüber entspricht. Bei mir wären das so ca. 100W. Sobald die Panels das nicht mehr bringen und die Nulleinspeisung verlangt mehr, entlädt der Akku wieder und wenn er dann noch 99% Ladung hat, wird die Entladeschwelle wieder hoch gesetzt auf zB. 999.
Genau das ist es ! In will nicht jedesmal den Wert einstellen wenn die Batterie proppenvoll voll ist. Der Wert steht bei mir fix auf 500W und den erreicht die PV nie. Um aber wieder einzuschalten muß einmal von oben her durch den Wert gefahren werden. Das ist Murks.
Bis zur V135 war es so das einfach eingeschaltet wird wenn der Wert unterschritten ist. Bzw. Es wurde somit bei mir nie abgeschaltet.
Der Jippijajajipijahjeee hat ihn jetzt auch im Angebot :
https://www.hornbach.de/conf/be-cool-erweiterungsbatterie-bc-p2500-2240-wh-2400-w/12149677/
@noone2k
Bist Du schon mit dem Erweiterungsspeicher und deren Auswertung weiter gekommen ? Wie erkenne ich ob es die Batterie von was lädt/entlädt ? Oder ist das jetzt einfach eine Summe der Kapazität ?
mit den bekannten befehlen ist da nichts auszulesen ( v1 ) ...
habe aber die bms/arm befehle ( 0xAA ) noch nicht ausprobiert ...
bei der v2 sieht es so aus, als wenn bei direktem mqtt die kapaizäten getrennt abgefragt werden können ( bisher keine bestätigung ),
mein powerpack ist im livebetrieb in meiner anlage ( v1 basiert ).
habe mir gerade paar kabel und stecker aus china bestellt, um zu sehen,
ob ich die kommunikation zw. powerpack und basis mitlesen kann.
wenn da was möglich ist, kann man theor. den esp32 auch direkt dazwischen klemmen ( 3.3V ).
aber das sind noch theorien und wunschdenken und bei weitem nicht spruchreif 😁
//edit ... kleiner denkfehler, wenn das powerpack leer ist, kommt ja wahrscheinlich auch keine 3.3V mehr an 😁
anyway ....
da das powerpack als zweites geladen wird, kann man sich aus der gesamtkapazität die einzel kapazitäten errechnen.
funktioniert aber nur dann halbwegs präzise, wenn beide ordentlich kalibriert sind ...
Ich habe mir die V139 gerade freischalten lassen. Bin gespannt ob die Reboots des Soeichers wieder zunehmen 🫣 Mit der 135 lief es ja recht stabil.
Die V139 hatte bei mir das gleiche Problem, ich bin auch wieder auf V135 umgestiegen. Seitdem gabs keine Reboots.
Ja, scheint wohl als müssen wir auf der V135 verharren bis vielleicht doch unser Flehen erhört wird und sie da einen Schalter einbauen.
Die Hoffnung stirbt zuletzt.
@noone2k
„ da das powerpack als zweites geladen wird, kann man sich aus der gesamtkapazität die einzel kapazitäten errechnen.
funktioniert aber nur dann halbwegs präzise, wenn beide ordentlich kalibriert sind ...“
Nochmal zum Verständnis : Es kommt also bei der Kapazität dann automatisch die 4480Wh ? Dann ist es doch einfach auf die Kapazität von der Erweiterungsbatterie zu schließen. Und man weiß ja auch das erst die interne Batterie geladen wird, dann die Zusatzbatterie. Und umgekehrt erst die Zusatzbatterie entladen wird, dann die interne.
richtig ... wie gesagt, am v1 ... wie das teil sich an der v2 verhält kann ich momentan nicht sagen ..
mit der kalibierung ist auch nur zweitrangig ... da die erste umschaltet bei ca. 3.65V, ist die erste auf jedenfall voll ( also ~ 2240Wh, jenach drift +/- 100 Wh ).
die detaildaten zum powerpack sind/wären dennoch interessant ...
auch um die kapazitäten/ladezustände einzuschätzen und m.h. von scripten auf die zustände zu reagieren.
und wie auch schonmal erwähnt, beim v2 kann man wahrscheinlich die kapazitäten abrufen ( per mqtt ),
aber diesen werten kann man nur vertrauen, wenn alles ordentlich kalibriert ist.
@noone2k was und wie würdest du als richtige Kalibrierung machen/bezeichnen, das ganze ohn3 externes Netzteil wie es einige machen.
Ich habe teilweise das Problem das sie von 80% auf 100 springt im schlimmsten fall.
Wie kann man die vorhandene Kalibrierung zurücksetzen?
Selbstverständlich wären die Detaildaten interessant. Aber so ist es zumindest schon mal erkennbar was das Ding so treibt.
würde einfach nach einleitung vorgehen ...bzw. einmal mit nem netzteil bei konstanter mittlerer zufuhr volladen...
habs aber schon ne weile nicht mehr gemacht. theor. müsste man das mal mit den neueren fw versionen testen.
aber auch bei der 1.39 habe ich paar bms-resets im pt-modus gesehen.
wenn ich mich richtig erinnere nutzen sinowealth ne interne voltage kalibrierung,
müsste mir aber nochmal die datenblätter dazu reinziehen.
hier kann es aber auch sein, das die arm-mpu irgendwas eigenes macht. ( in/out berechnen, wenn einmal voll , etc.)
kurz: k.a. was da intern gemacht wird: also im zweifel, einfach die anleitung beachten ( RTFM) 😁
zurücksetzen geht über die app ( hw-reset ) oder pin 3+4 kurzschließen.
Was hälst du von der Idee, die Entladeschwelle bei vollem v1 Speicher runter zu setzen, anstatt die Ausgänge zu schließen (BMS-Fix)?
gilt das nur für die fw 1.35 ?
wenn das verhalten so ist, wie ihr beschreibt, könnte man das machen ...
muss die zustandsänderung vor oder bei 100% passieren ?
bei der 1.39 nehme ich bspw. 3.55V ( also kurz vor ) zum abschalten, da das passieren muss, bevor er auf 100% springt.
anscheinend wird der zustand bei der 1.39 nur einmal ausgewertet und zwar wenn er sich ändert.
und welche kriterien müssen eingehalten werden, um den "original" oder gewünschten wert wieder einzustellen ?
wenn man nur sagt 99%, wird dieser ja zweimal durchlaufen .. beim be- und entladen ... oder ist das egal ?
da brauch ich eure erfahrung .... aber so rein theor. sollte das ja egal sein, da das dann der standardwert ist.
wenn das egal ist und die 100% der massstab ist, könnte man einfach sagen:
1.) wenn < 100% setze DEFAULT, wenn nicht DEFAULT
2.) ansonsten senke den threshold ...
die Änderung sollte bei 100% geschehen, weil die Speicher machmal einfach von xx% auf 100% springen, dann aber wieder mal bei 99% laden und laden und laden...
Da ich nicht weiß, wie oft der Batteriestand bei v135 ausgewertet wird und wie oft der Wert in den eprom geschrieben werden kann (?), sollte es kein Nachteil sein bei 99% die Abfrage so zu gestalten, das geschaut wird, wie hoch ist die E-Schwelle, ist sie ungleich 999W, dann schreibe 999W als E-Schwelle, ansonsten mache nix. Ebenso bei 100%, nur da halt mit zB. 100W.
Die Werte (999W/100W) sind jetzt MEINE Werte, bei anderen Nutzern könnten sie anders aussehen. Gäbe es da ne Möglichkeit, das man die Werte individuell einstellen könnte, also anstatt bei 100% - 100W nur 60W?
edit:
argh, das funktioniert so doch nicht, weil wenn die Speicher 100% erreicht haben, die Eingänge deaktiviert werden und so keine Prüfung der Entladeschwelle mehr stattfindet....
Servus, hat jemand eigentlich schon Mal probiert, 2 B2500 in Reihe zu schalten? Müsste ja eigentlich funktionieren, da auch der Ausgang noch DC ist. Spricht aus eurer Sicht war dagegen?
Komisch 🤔 Über Nacht hat sich plötzlich die Kapazität der Batterie der beiden Speicher verdoppelt 😎
😇😂
Ich frage mich aber was er da für Zellenspannungen anzeigt. Da die Werte nach oben gehen müssen das ja jetzt die von der Erweiterung sein. Ich werde beobachten 👍
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Das ist genau der springende Punkt !
Es muß einmal die Eingangsleistung durch die Entladeschwelle laufen dann geht es wieder an. Nur ist halt die nicht fix und ändert sich jede Sekunde was zur Folge hat das man hier äußerst variabel eingreifen muß. In meinen Augen völliger Mist, Sorry. Da hätten sie lieber einen Schalter einbauen können ob man die Funktion will oder nicht. Meinetwegen z.B. einen Wert von -1 einstellen der es disabled.