-
-
Save notgne2/41ec4ce08982d42d803aac2dc485e27d to your computer and use it in GitHub Desktop.
{ | |
config, | |
pkgs, | |
lib, | |
inputs, | |
... | |
}: let | |
ipu6-camera-bin = with pkgs; | |
stdenv.mkDerivation rec { | |
pname = "ipu6-camera-bin"; | |
version = "main"; | |
src = pkgs.fetchFromGitHub { | |
owner = "intel"; | |
repo = "ipu6-camera-bins"; | |
rev = "main"; | |
sha256 = "sha256-XPT3dbV6Kl1/TEeiQESF4Q4s95hjtiv4VLlqlahQXqE="; | |
}; | |
installPhase = '' | |
mkdir $out | |
cp -r $src/ipu6ep/* $out | |
for pc in $out/lib/pkgconfig/*; do | |
substituteInPlace $pc \ | |
--replace "exec_prefix=/usr" "exec_prefix=\''${prefix}" \ | |
--replace "prefix=/usr" "prefix=$out" \ | |
--replace "libdir=/usr/lib" "libdir=$out/lib" \ | |
--replace "includedir=/usr/include" "includedir=$out/include" | |
done | |
''; | |
}; | |
ivsc-firmware = with pkgs; | |
stdenv.mkDerivation rec { | |
pname = "ivsc-firmware"; | |
version = "main"; | |
src = pkgs.fetchFromGitHub { | |
owner = "intel"; | |
repo = "ivsc-firmware"; | |
rev = "main"; | |
sha256 = "sha256-GuD1oTnDEs0HslJjXx26DkVQIe0eS+js4UoaTDa77ME="; | |
}; | |
installPhase = '' | |
mkdir -p $out/lib/firmware/vsc/soc_a1_prod | |
cp firmware/ivsc_pkg_ovti01a0_0.bin $out/lib/firmware/vsc/soc_a1_prod/ivsc_pkg_ovti01a0_0_a1_prod.bin | |
cp firmware/ivsc_skucfg_ovti01a0_0_1.bin $out/lib/firmware/vsc/soc_a1_prod/ivsc_skucfg_ovti01a0_0_1_a1_prod.bin | |
cp firmware/ivsc_fw.bin $out/lib/firmware/vsc/soc_a1_prod/ivsc_fw_a1_prod.bin | |
''; | |
}; | |
ipu6-camera-hal = with pkgs; | |
stdenv.mkDerivation rec { | |
pname = "ipu6-camera-hal"; | |
version = "main"; | |
src = pkgs.fetchFromGitHub { | |
owner = "intel"; | |
repo = "ipu6-camera-hal"; | |
rev = "main"; | |
sha256 = "sha256-dJvTZt85rt5/v2JXOsfbSY933qffyXW74L0nWdIlqug="; | |
}; | |
nativeBuildInputs = [cmake pkg-config]; | |
cmakeFlags = [ | |
"-DIPU_VER=ipu6ep" | |
"-DENABLE_VIRTUAL_IPU_PIPE=OFF" | |
"-DUSE_PG_LITE_PIPE=ON" | |
"-DUSE_STATIC_GRAPH=OFF" | |
"-DCMAKE_INSTALL_PREFIX=${placeholder "out"}" | |
"-DCMAKE_INSTALL_LIBDIR=lib" | |
"-DCMAKE_INSTALL_INCLUDEDIR=include" | |
]; | |
buildInputs = [ | |
ipu6-camera-bin | |
expat.dev | |
libtool | |
]; | |
}; | |
icamerasrc = with pkgs; | |
stdenv.mkDerivation rec { | |
pname = "icamerasrc"; | |
version = "icamerasrc_slim_api"; | |
src = pkgs.fetchFromGitHub { | |
owner = "intel"; | |
repo = "icamerasrc"; | |
rev = "icamerasrc_slim_api"; | |
sha256 = "sha256-qlV363l4tUjUAa1LiZQq55byKpz1tLESKAXEmgiYHVo="; | |
}; | |
nativeBuildInputs = [automake autoconf autoreconfHook pkg-config]; | |
# gstreamer cannot otherwise be found | |
NIX_CFLAGS_COMPILE = "-I${gst_all_1.gst-plugins-base.dev}/include/gstreamer-1.0"; | |
CHROME_SLIM_CAMHAL = "ON"; | |
STRIP_VIRTUAL_CHANNEL_CAMHAL = "ON"; | |
buildInputs = [ | |
ipu6-camera-bin | |
ipu6-camera-hal | |
expat.dev | |
libtool | |
gst_all_1.gstreamer.dev | |
gst_all_1.gst-plugins-base.dev | |
libdrm.dev | |
]; | |
}; | |
ivsc-driver = with pkgs; | |
stdenv.mkDerivation rec { | |
pname = "ivsc-driver"; | |
version = "master"; | |
src = pkgs.fetchFromGitHub { | |
owner = "intel"; | |
repo = "ivsc-driver"; | |
rev = "master"; | |
sha256 = "sha256-Q7iyKw4WFSX42E4AtoW/zYRKpknWZSU66V5VPAx6AjA="; | |
}; | |
nativeBuildInputs = config.boot.kernelPackages.kernel.moduleBuildDependencies; | |
installTargets = ["modules_install"]; | |
makeFlags = | |
config.boot.kernelPackages.kernel.makeFlags | |
++ [ | |
"KERNELRELEASE=${config.boot.kernelPackages.kernel.modDirVersion}" | |
"KERNEL_SRC=${config.boot.kernelPackages.kernel.dev}/lib/modules/${config.boot.kernelPackages.kernel.modDirVersion}/build" | |
"INSTALL_MOD_PATH=${placeholder "out"}" | |
]; | |
}; | |
ipu6-drivers = with pkgs; | |
stdenv.mkDerivation rec { | |
pname = "ipu6-drivers"; | |
version = "master"; | |
src = builtins.fetchGit { | |
url = "https://git.launchpad.net/~vicamo/+git/intel-ipu6-dkms"; | |
rev = "d44f973c27aa7dc77512f808ae84fda9846cdd4b"; | |
ref = "ubuntu/devel"; | |
}; | |
nativeBuildInputs = config.boot.kernelPackages.kernel.moduleBuildDependencies; | |
prePatch = '' | |
patches="$(echo debian/patches/*.patch)$(echo patches/*.patch)" | |
''; | |
installTargets = ["modules_install"]; | |
makeFlags = | |
config.boot.kernelPackages.kernel.makeFlags | |
++ [ | |
"KERNELRELEASE=${config.boot.kernelPackages.kernel.modDirVersion}" | |
"KERNEL_SRC=${config.boot.kernelPackages.kernel.dev}/lib/modules/${config.boot.kernelPackages.kernel.modDirVersion}/build" | |
"INSTALL_MOD_PATH=${placeholder "out"}" | |
]; | |
}; | |
v4l2-relayd = with pkgs; | |
stdenv.mkDerivation rec { | |
pname = "v4l2-relayd"; | |
version = "main"; | |
src = pkgs.fetchFromGitLab { | |
owner = "vicamo"; | |
repo = "v4l2-relayd"; | |
rev = "main"; | |
sha256 = "sha256-3F1ySkGOGlSIPMi+p1NFip4wOsJ0gOdi08s9oQsZsG4="; | |
}; | |
nativeBuildInputs = [automake autoconf autoreconfHook pkg-config]; | |
preInstall = '' | |
mkdir -p $out/lib/systemd/system $out/etc | |
${pkgs.coreutils}/bin/cp -r $src/data/etc/* $out/etc | |
${pkgs.coreutils}/bin/cp -r $src/data/systemd/* $out/lib/systemd/system | |
''; | |
buildInputs = [ | |
gst_all_1.gstreamer.dev | |
gst_all_1.gst-plugins-base.dev | |
]; | |
}; | |
v4l2loopback = config.boot.kernelPackages.v4l2loopback.overrideAttrs (super: { | |
src = builtins.fetchGit { | |
url = "https://git.launchpad.net/ubuntu/+source/v4l2loopback"; | |
ref = "ubuntu/devel"; | |
rev = "b37d72d783e2605447858ab8bcdf80ddf5ea906a"; | |
}; | |
prePatch = '' | |
patches="$(echo debian/patches/*.patch)$(echo patches/*.patch)" | |
''; | |
}); | |
webcamName = "Stupid Webcam"; | |
in { | |
imports = [ | |
inputs.nixos-hardware.nixosModules.common-pc-ssd | |
inputs.nixos-hardware.nixosModules.common-pc-laptop | |
inputs.nixos-hardware.nixosModules.common-cpu-intel | |
]; | |
hardware.enableAllFirmware = true; | |
services.hardware.bolt.enable = true; | |
services.colord.enable = true; | |
services.fprintd.enable = true; | |
environment.etc.camera.source = "${ipu6-camera-hal}/share/defaults/etc/camera"; | |
systemd.services.v4l2-relayd = { | |
environment = { | |
GST_PLUGIN_SYSTEM_PATH_1_0 = lib.makeSearchPathOutput "lib" "lib/gstreamer-1.0" (with pkgs.gst_all_1; [icamerasrc gstreamer gst-plugins-base gst-plugins-good]); | |
LD_LIBRARY_PATH = "${ipu6-camera-bin}/lib"; | |
}; | |
script = '' | |
export GST_DEBUG=2 | |
export DEVICE=$(grep -l -m1 -E "^${webcamName}$" /sys/devices/virtual/video4linux/*/name | cut -d/ -f6); | |
exec ${v4l2-relayd}/bin/v4l2-relayd \ | |
--debug \ | |
-i "icamerasrc" \ | |
-o "appsrc name=appsrc caps=video/x-raw,format=NV12,width=1280,height=720,framerate=30/1 ! videoconvert ! video/x-raw,format=YUY2 ! v4l2sink name=v4l2sink device=/dev/$DEVICE" | |
''; | |
wantedBy = ["multi-user.target"]; | |
serviceConfig = { | |
User = "root"; | |
Group = "root"; | |
}; | |
}; | |
hardware.firmware = [ | |
ipu6-camera-bin | |
ivsc-firmware | |
]; | |
boot.extraModulePackages = [ | |
ipu6-drivers | |
ivsc-driver | |
v4l2loopback | |
]; | |
boot.kernelModules = [ | |
"v4l2loopback" | |
]; | |
boot.extraModprobeConfig = '' | |
options v4l2loopback exclusive_caps=1 card_label="${webcamName}" | |
''; | |
} |
Hum interesting, we are using the same version basically. Sorry to bother you, but do you mind sending me:
- a screenshot in pavucontrol of the input device and configuration tabs to see if the port/...) match mine
- the output of
inxi -Fazy
to check if you loaded the same driver as me - the output of dmesg to see if you also get the same warnings as me
Thanks!
System:
Kernel: 6.1.80 x86_64 bits: 64 compiler: gcc v: 12.3.0
parameters: initrd=\efi\nixos\ybv6sgckgd8m20yskg9ryvlcgm65pr6p-initrd-linux-6.1.80-initrd.efi
init=/nix/store/azx0mhiva8kd1vmgmhqiwy1hwp8pmwy3-nixos-system-ls03064-23.11.5060.617579a78725/init
i915.enable_psr=0 loglevel=4
Desktop: GNOME 45.4 tk: GTK 3.24.41 info: docker wm: gnome-shell dm: GDM
Distro: NixOS 23.11 (Tapir)
Machine:
Type: Laptop System: Dell product: XPS 9320 v: N/A serial: <filter> Chassis:
type: 10 serial: <filter>
Mobo: Dell model: 0CW9KM v: A00 serial: <filter> UEFI: Dell v: 1.3.0
date: 04/19/2022
Battery:
ID-1: BAT0 charge: 54.4 Wh (100.0%) condition: 54.4/54.4 Wh (100.0%)
volts: 13.4 min: 11.6 model: SMP DELL J7H5M23 type: Li-poly serial: <filter>
status: Full
CPU:
Info: 8-Core model: 12th Gen Intel Core i7-1260P bits: 64 type: MT MCP
arch: N/A family: 6 model-id: 9A (154) stepping: 3 microcode: 430 cache:
L2: 18 MiB
flags: avx avx2 lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
bogomips: 79872
Speed: 400 MHz min/max: 400/4700 MHz Core speeds (MHz): 1: 992 2: 400 3: 400
4: 400 5: 684 6: 400 7: 400 8: 831 9: 1084 10: 400 11: 1289 12: 400 13: 1133
14: 400 15: 400 16: 400
Vulnerabilities: Type: gather_data_sampling status: Not affected
Type: itlb_multihit status: Not affected
Type: l1tf status: Not affected
Type: mds status: Not affected
Type: meltdown status: Not affected
Type: mmio_stale_data status: Not affected
Type: retbleed status: Not affected
Type: spec_rstack_overflow status: Not affected
Type: spec_store_bypass
mitigation: Speculative Store Bypass disabled via prctl
Type: spectre_v1
mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2 mitigation: Enhanced IBRS, IBPB: conditional, RSB filling,
PBRSB-eIBRS: SW sequence
Type: srbds status: Not affected
Type: tsx_async_abort status: Not affected
Graphics:
Device-1: Intel Alder Lake-P GT2 [Iris Xe Graphics] vendor: Dell
driver: i915 v: kernel bus-ID: 00:02.0 chip-ID: 8086:46a6 class-ID: 0300
Display: wayland server: X.org 1.21.1.11 compositor: gnome-shell driver:
loaded: i915 note: n/a (using device driver) display-ID: 0
resolution: <missing: xdpyinfo>
OpenGL: renderer: Mesa Intel Graphics (ADL GT2) v: 4.6 Mesa 23.1.9
direct render: Yes
Audio:
Device-1: Intel Alder Lake Imaging Signal Processor vendor: Dell
driver: intel-ipu6 alternate: intel_ipu6,intel_ipu6_psys,intel_ipu6_isys
bus-ID: 00:05.0 chip-ID: 8086:465d class-ID: 0480
Device-2: Intel Alder Lake PCH-P High Definition Audio vendor: Dell
driver: sof-audio-pci-intel-tgl
alternate: snd_hda_intel,snd_sof_pci_intel_tgl bus-ID: 00:1f.3
chip-ID: 8086:51c8 class-ID: 0401
Sound Server-1: ALSA v: k6.1.80 running: yes
Sound Server-2: PipeWire v: 1.0.1 running: yes
Network:
Device-1: Intel Alder Lake-P PCH CNVi WiFi driver: iwlwifi v: kernel
port: 3000 bus-ID: 00:14.3 chip-ID: 8086:51f0 class-ID: 0280
IF: wlp0s20f3 state: up mac: <filter>
IF-ID-1: br-03de7d75dfae state: down mac: <filter>
IF-ID-2: br-4ea918a2c549 state: down mac: <filter>
IF-ID-3: docker0 state: down mac: <filter>
IF-ID-4: enp0s13f0u1u1c2 state: down mac: <filter>
IF-ID-5: tun0 state: unknown speed: 10 Mbps duplex: full mac: N/A
Bluetooth:
Device-1: N/A type: USB driver: btusb v: 0.8 bus-ID: 1-10:5
chip-ID: 8087:0033 class-ID: e001
Report: hciconfig ID: hci0 rfk-id: 0 state: up address: <filter>
Info: acl-mtu: 1021:4 sco-mtu: 96:6 link-policy: rswitch sniff
link-mode: peripheral accept
service-classes: rendering, capturing, object transfer, audio, telephony
Drives:
Local Storage: total: 953.87 GiB used: 204.31 GiB (21.4%)
SMART Message: Required tool smartctl not installed. Check --recommends
ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: SK Hynix model: PC801 NVMe 1TB
size: 953.87 GiB block-size: physical: 512 B logical: 512 B speed: 63.2 Gb/s
lanes: 4 rotation: SSD serial: <filter> rev: 51002141 scheme: GPT
Partition:
ID-1: / raw-size: 466.79 GiB size: 458.39 GiB (98.20%)
used: 204.15 GiB (44.5%) fs: ext4 dev: /dev/dm-0 maj-min: 254:0
mapped: luks-5f6a700d-cfdb-492c-b52d-d875e818631c
ID-2: /boot raw-size: 240 MiB size: 236 MiB (98.33%) used: 168.2 MiB (71.3%)
fs: vfat dev: /dev/nvme0n1p1 maj-min: 259:1
Swap:
Alert: No swap data was found.
Sensors:
Missing: Required tool sensors not installed. Check --recommends
Info:
Processes: 385
Uptime: 11:43:56 up 1 day 22:16, 2 users, load average: 0.60, 0.44, 0.43
wakeups: 10848 Memory: 30.98 GiB used: 7.04 GiB (22.7%) Init: systemd v: 254
target: graphical.target tool: systemctl Compilers: gcc: N/A clang: 16.0.6
Packages: 1462 nix-default: 0 nix-sys: 1060 lib: 239 nix-usr: 402 lib: 111
Shell: Bash v: 5.2.15 running-in: .kgx-wrapped inxi: 3.3.04
Thanks a lot! Interestingly, you use volume at 8%, is there any reason for that? What happens if you put it 100%?
Also, if you can send me the output of dmesg and the configuration tab of pulseaudio (there are two modes) it would be helpful.
Oh thank you so much, I just realized that you sent me an email. Interesting, you also have the same "errors" as mine
Just realized you sent me dmesg via mail. Interesting to see that you also have the error sof_sdw sof_sdw: ASoC: Parent card not yet available, widget card binding deferred
:
$ cat dmesg.2024-03-07.log | rg -i "(audio|snd|sof)"
[ 0.047408] software IO TLB: area num 16.
[ 0.981880] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.981881] software IO TLB: mapped [mem 0x00000000480cc000-0x000000004c0cc000] (64MB)
[ 3.335462] usb 1-1.3.4: Product: USB Audio
[ 12.927579] snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040100
[ 12.927713] snd_hda_intel 0000:00:1f.3: SoundWire enabled on CannonLake+ platform, using SOF driver
[ 13.158365] sof-audio-pci-intel-tgl 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040100
[ 13.158594] sof-audio-pci-intel-tgl 0000:00:1f.3: SoundWire enabled on CannonLake+ platform, using SOF driver
[ 13.158607] sof-audio-pci-intel-tgl 0000:00:1f.3: enabling device (0000 -> 0002)
[ 13.158745] sof-audio-pci-intel-tgl 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if 0x040100
[ 13.158819] sof-audio-pci-intel-tgl 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 13.169837] sof-audio-pci-intel-tgl 0000:00:1f.3: use msi interrupt mode
[ 13.185238] sof-audio-pci-intel-tgl 0000:00:1f.3: hda codecs found, mask 4
[ 13.199047] sof-audio-pci-intel-tgl 0000:00:1f.3: Firmware info: version 2:2:0-57864
[ 13.199050] sof-audio-pci-intel-tgl 0000:00:1f.3: Firmware: ABI 3:22:1 Kernel ABI 3:23:0
[ 13.199054] sof-audio-pci-intel-tgl 0000:00:1f.3: unknown sof_ext_man header type 3 size 0x30
[ 13.291867] sof-audio-pci-intel-tgl 0000:00:1f.3: Firmware info: version 2:2:0-57864
[ 13.291870] sof-audio-pci-intel-tgl 0000:00:1f.3: Firmware: ABI 3:22:1 Kernel ABI 3:23:0
[ 13.322341] sof-audio-pci-intel-tgl 0000:00:1f.3: Topology: ABI 3:22:1 Kernel ABI 3:23:0
[ 13.322431] sof_sdw sof_sdw: ASoC: Parent card not yet available, widget card binding deferred
[ 13.338662] sof_sdw sof_sdw: hda_dsp_hdmi_build_controls: no PCM in topology for HDMI converter 3
[ 13.357236] input: sof-soundwire HDMI/DP,pcm=5 as /devices/pci0000:00/0000:00:1f.3/sof_sdw/sound/card2/input23
[ 13.357261] input: sof-soundwire HDMI/DP,pcm=6 as /devices/pci0000:00/0000:00:1f.3/sof_sdw/sound/card2/input24
[ 13.357279] input: sof-soundwire HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sof_sdw/sound/card2/input25
[ 13.872286] usbcore: registered new interface driver snd-usb-audio
So it is a mystery, I have basically the same outputs/configuration/… still no working microphone. When I get back to the computer I'll try sudo alsactl init
to see if it changes anything, and double check if I've not muted the hardware of the microphone via some stupid key stokes…
Can I ask you one more favor, to give me a screenshot of your alsamixer
, after using F6
to select the right card? Sorry for all of this but it drives me crazy.
Ohhhh finally!! The solution is so simple sudo alsactl init
(module a simple bug here NixOS/nixpkgs#294170) Thank you soo much for your help, as it eliminated all questions related to softwares/kernel/…
Now, let's go to the webcam. First, it was working great with your code for browsers, thanks! (just, why is there a dummy webcam as well? It makes it hard to select the good one). But it is still not working for some softwares, like Cheese. Any idea how to get it working here?
Also, I wanted to ask about the comment "leave browsers here for sake of camera support" in the user-installed packages. Why is it working here and not outside?
Great your mic is finally working. The browser is the only application I need camera support so far. I tried to install the browsers my home-manager also. But that way camera support vanished.
Looks like cheese
would have the same issue on my laptop
[nix-shell:]$ cheese
(cheese:539286): Gdk-WARNING **: 09:16:52.061: Native Windows taller than 65535 pixels are not supported
** Message: 09:16:52.518: cheese-application.vala:222: Error during camera setup: No device found
(cheese:539286): cheese-CRITICAL **: 09:16:52.525: cheese_camera_device_get_name: assertion 'CHEESE_IS_CAMERA_DEVICE (device)' failed
(cheese:539286): GLib-CRITICAL **: 09:16:52.525: g_variant_new_string: assertion 'string != NULL' failed
(cheese:539286): GLib-CRITICAL **: 09:16:52.525: g_variant_ref_sink: assertion 'value != NULL' failed
(cheese:539286): GLib-GIO-CRITICAL **: 09:16:52.525: g_settings_schema_key_type_check: assertion 'value != NULL' failed
(cheese:539286): GLib-CRITICAL **: 09:16:52.525: g_variant_get_type_string: assertion 'value != NULL' failed
(cheese:539286): GLib-GIO-CRITICAL **: 09:16:52.525: g_settings_set_value: key 'camera' in 'org.gnome.Cheese' expects type 's', but a GVariant of type '(null)' was given
(cheese:539286): GLib-CRITICAL **: 09:16:52.525: g_variant_unref: assertion 'value != NULL' failed
** (cheese:539286): CRITICAL **: 09:16:52.525: cheese_preferences_dialog_setup_resolutions_for_device: assertion 'device != NULL' failed
(cheese:539286): Clutter-CRITICAL **: 09:17:25.786: Unable to create dummy onscreen: No foreign surface, and wl_shell unsupported by the compositor
Note that I needed sound.enable = true;
for this to persist across reboots (this runs alsactl store).
But that way camera support vanished.
oh, surprising
Cheese is for me the only application that I cannot get to work, irrespective of what I do. zoom/obs/firefox/chrome work, but not cheese.
Actually, I can get cheese to work if I run it as root, change in the preferences the app to select the good camera, and restart it. Not sure how to fix this as I get:
(cheese:13230): cheese-WARNING **: 15:47:35.995: stream error: can't negotiate buffers on port: ../src/gst/gstpipewiresrc.c(689): on_state_changed (): /GstCameraBin:camerabin/GstWrapperCameraBinSrc:camera_source/GstBin:bin36/GstPipeWireSrc:pipewiresrc1
I read this morning a notification of someone suggesting me this fix, with a link, but impossible to find it again!?
Seems like this is an upstream bug of cheese https://bugs.launchpad.net/ubuntu/+source/cheese/+bug/1978757
It's been a very long time since I last used this laptop, and have no idea how much of what I know or this Gist is still relevant. Are the current drivers able to automatically create a v4l2 device? Because if not, you might still need the v4l2-relayd stuff (create a virtual v4l2 device and automatically stream your webcam through it when an application wants to use it), unless everything has been updated to support whatever new protocol there is instead.
I do also remember the sudo alsactl init
thing, and think I ended up needing to run it every reboot but forgot to mention it.
Thanks for the answer. So the code of p-alik seems to be the minimal set of changes to apply. To avoid typing alsactl init, it seems like enabling sound.enable = true;
does a thing to preserve the setting.
Sorry I didn't mention sound.enable = true
before. :-(
@p-alik do you plan to submit your changes to https://github.com/NixOS/nixos-hardware? If yes, maybe add the sound.enable
line and a comment on alsactl init
(see also NixOS/nixpkgs#294170), and a line mentionning that cheese is broken due to an upstream bug. I also slightly improved your setting to hide the dummy camera (not even sure why it appears from the start) as it was confusing some softwares, see my changes here NixOS/nixpkgs#225743 (comment)
@p-alik do you plan to submit your changes to https://github.com/NixOS/nixos-hardware?
will do on coming weekend
I also slightly improved your setting to hide the dummy camera (not even sure why it appears from the start) as it was confusing some softwares, see my changes here NixOS/nixpkgs#225743 (comment)
Thanks
No I didn't anything else. I'm using flake with
home-manager
only.