Created
October 3, 2016 16:22
-
-
Save notro/98bcb05097bd9ecc17fb6e23ef066916 to your computer and use it in GitHub Desktop.
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
--- /dev/fd/63 2016-10-03 16:20:14.192032103 +0200 | |
+++ /dev/fd/62 2016-10-03 16:20:14.192032103 +0200 | |
@@ -18,8 +18,8 @@ | |
i2c0_baudrate = [00 00 00 1c 63 6c 6f 63 6b 2d 66 72 65 71 75 65 6e 63 79 3a 30 00]; | |
i2c1 = [00 00 00 1d 73 74 61 74 75 73 00]; | |
i2c1_baudrate = [00 00 00 1d 63 6c 6f 63 6b 2d 66 72 65 71 75 65 6e 63 79 3a 30 00]; | |
- i2c2_baudrate = [00 00 00 0e 63 6c 6f 63 6b 2d 66 72 65 71 75 65 6e 63 79 3a 30 00]; | |
- i2c2_iknowwhatimdoing = [00 00 00 0e 73 74 61 74 75 73 00]; | |
+ i2c2_baudrate = "", "", "", "\rclock-frequency:0"; | |
+ i2c2_iknowwhatimdoing = "", "", "", "\rstatus"; | |
i2s = [00 00 00 1a 73 74 61 74 75 73 00]; | |
pwr_led_activelow = <0x1f 0x6770696f 0x733a3800>; | |
pwr_led_gpio = <0x1f 0x6770696f 0x733a3400>; | |
@@ -38,7 +38,6 @@ | |
aliases { | |
audio = "/soc/audio"; | |
aux = "/soc/aux@0x7e215000"; | |
- clocks = "/clocks"; | |
dma = "/soc/dma@7e007000"; | |
fb = "/soc/fb"; | |
gpio = "/soc/gpio@7e200000"; | |
@@ -47,7 +46,7 @@ | |
i2c2 = "/soc/i2c@7e805000"; | |
i2s = "/soc/i2s@7e203000"; | |
intc = "/soc/interrupt-controller@7e00b200"; | |
- leds = "/soc/leds"; | |
+ leds = "/leds"; | |
mailbox = "/soc/mailbox@7e00b800"; | |
mmc = "/soc/mmc@7e300000"; | |
random = "/soc/rng@7e104000"; | |
@@ -56,7 +55,7 @@ | |
sound = "/soc/sound"; | |
spi0 = "/soc/spi@7e204000"; | |
spi1 = "/soc/spi@7e215080"; | |
- spi2 = "/soc/spi@7e2150C0"; | |
+ spi2 = "/soc/spi@7e2150c0"; | |
thermal = "/soc/thermal"; | |
uart0 = "/soc/serial@7e201000"; | |
uart1 = "/soc/serial@7e215040"; | |
@@ -69,19 +68,19 @@ | |
bootargs = [00]; | |
}; | |
- clocks: clocks { | |
+ clocks { | |
#address-cells = <0x1>; | |
#size-cells = <0x0>; | |
compatible = "simple-bus"; | |
- clk_osc: clock@6 { | |
+ clk_osc: clock@3 { | |
#clock-cells = <0x0>; | |
clock-frequency = <0x124f800>; | |
clock-output-names = "osc"; | |
compatible = "fixed-clock"; | |
linux,phandle = <0x3>; | |
phandle = <0x3>; | |
- reg = <0x6>; | |
+ reg = <0x3>; | |
}; | |
}; | |
@@ -126,6 +125,26 @@ | |
}; | |
}; | |
+ leds: leds { | |
+ compatible = "gpio-leds"; | |
+ | |
+ act_led: act { | |
+ gpios = <0x9 0x2f 0x0>; | |
+ label = "led0"; | |
+ linux,default-trigger = "mmc0"; | |
+ linux,phandle = <0x1e>; | |
+ phandle = <0x1e>; | |
+ }; | |
+ | |
+ pwr_led: pwr { | |
+ gpios = <0x9 0x23 0x0>; | |
+ label = "led1"; | |
+ linux,default-trigger = "input"; | |
+ linux,phandle = <0x1f>; | |
+ phandle = <0x1f>; | |
+ }; | |
+ }; | |
+ | |
memory { | |
device_type = "memory"; | |
reg = <0x0 0x0>; | |
@@ -157,12 +176,12 @@ | |
#clock-cells = <0x1>; | |
clocks = <0x4 0x14>; | |
compatible = "brcm,bcm2835-aux"; | |
- linux,phandle = <0xc>; | |
- phandle = <0xc>; | |
+ linux,phandle = <0xb>; | |
+ phandle = <0xb>; | |
reg = <0x7e215000 0x8>; | |
}; | |
- cprman: cprman@7e101000 { | |
+ cprman: clocks: cprman@7e101000 { | |
#clock-cells = <0x1>; | |
clocks = <0x3>; | |
compatible = "brcm,bcm2835-cprman"; | |
@@ -212,8 +231,8 @@ | |
gpio-controller; | |
interrupt-controller; | |
interrupts = <0x2 0x11 0x2 0x12>; | |
- linux,phandle = <0x8>; | |
- phandle = <0x8>; | |
+ linux,phandle = <0x9>; | |
+ phandle = <0x9>; | |
reg = <0x7e200000 0xb4>; | |
audio_pins: audio_pins { | |
@@ -226,53 +245,52 @@ | |
i2c0_pins: i2c0 { | |
brcm,function = <0x4>; | |
brcm,pins = <0x0 0x1>; | |
- linux,phandle = <0xb>; | |
- phandle = <0xb>; | |
+ linux,phandle = <0xa>; | |
+ phandle = <0xa>; | |
}; | |
i2c1_pins: i2c1 { | |
brcm,function = <0x4>; | |
brcm,pins = <0x2 0x3>; | |
- linux,phandle = <0xd>; | |
- phandle = <0xd>; | |
+ linux,phandle = <0xc>; | |
+ phandle = <0xc>; | |
}; | |
i2s_pins: i2s { | |
brcm,function = <0x4>; | |
brcm,pins = <0x12 0x13 0x14 0x15>; | |
- linux,phandle = <0x7>; | |
- phandle = <0x7>; | |
+ linux,phandle = <0x6>; | |
+ phandle = <0x6>; | |
}; | |
sdhost_pins: sdhost_pins { | |
brcm,function = <0x4>; | |
brcm,pins = <0x30 0x31 0x32 0x33 0x34 0x35>; | |
- linux,phandle = <0x6>; | |
- phandle = <0x6>; | |
+ linux,phandle = <0xf>; | |
+ phandle = <0xf>; | |
}; | |
spi0_cs_pins: spi0_cs_pins { | |
brcm,function = <0x1>; | |
brcm,pins = <0x8 0x7>; | |
- linux,phandle = <0xa>; | |
- phandle = <0xa>; | |
+ linux,phandle = <0x8>; | |
+ phandle = <0x8>; | |
}; | |
spi0_pins: spi0_pins { | |
brcm,function = <0x4>; | |
brcm,pins = <0x9 0xa 0xb>; | |
- linux,phandle = <0x9>; | |
- phandle = <0x9>; | |
+ linux,phandle = <0x7>; | |
+ phandle = <0x7>; | |
}; | |
}; | |
gpiomem { | |
compatible = "brcm,bcm2835-gpiomem"; | |
reg = <0x7e200000 0x1000>; | |
- status = "okay"; | |
}; | |
- gpu: gpu { | |
+ gpu: vc4: gpu { | |
compatible = "brcm,bcm2835-vc4"; | |
status = "disabled"; | |
}; | |
@@ -281,15 +299,17 @@ | |
clock-names = "pixel", "hdmi"; | |
clocks = <0x4 0x10 0x4 0x19>; | |
compatible = "brcm,bcm2835-hdmi"; | |
- ddc = <0xe>; | |
- hpd-gpios = <0x8 0x2e 0x1>; | |
- power-domains = <0xf 0x5>; | |
+ ddc = <0xd>; | |
+ hpd-gpios = <0x9 0x2e 0x1>; | |
+ interrupts = <0x2 0x8 0x2 0x9>; | |
+ power-domains = <0xe 0x5>; | |
reg = <0x7e902000 0x600 0x7e808000 0x100>; | |
status = "disabled"; | |
}; | |
hvs: hvs@7e400000 { | |
compatible = "brcm,bcm2835-hvs"; | |
+ interrupts = <0x2 0x1>; | |
reg = <0x7e400000 0x6000>; | |
status = "disabled"; | |
}; | |
@@ -303,7 +323,7 @@ | |
interrupts = <0x2 0x15>; | |
linux,phandle = <0x1c>; | |
phandle = <0x1c>; | |
- pinctrl-0 = <0xb>; | |
+ pinctrl-0 = <0xa>; | |
pinctrl-names = "default"; | |
reg = <0x7e205000 0x1000>; | |
status = "disabled"; | |
@@ -318,7 +338,7 @@ | |
interrupts = <0x2 0x15>; | |
linux,phandle = <0x1d>; | |
phandle = <0x1d>; | |
- pinctrl-0 = <0xd>; | |
+ pinctrl-0 = <0xc>; | |
pinctrl-names = "default"; | |
reg = <0x7e804000 0x1000>; | |
status = "disabled"; | |
@@ -331,8 +351,8 @@ | |
clocks = <0x4 0x14>; | |
compatible = "brcm,bcm2708-i2c"; | |
interrupts = <0x2 0x15>; | |
- linux,phandle = <0xe>; | |
- phandle = <0xe>; | |
+ linux,phandle = <0xd>; | |
+ phandle = <0xd>; | |
reg = <0x7e805000 0x1000>; | |
status = "disabled"; | |
}; | |
@@ -345,7 +365,7 @@ | |
dmas = <0x5 0x2 0x5 0x3>; | |
linux,phandle = <0x1a>; | |
phandle = <0x1a>; | |
- pinctrl-0 = <0x7>; | |
+ pinctrl-0 = <0x6>; | |
pinctrl-names = "default"; | |
reg = <0x7e203000 0x24>; | |
status = "disabled"; | |
@@ -362,26 +382,6 @@ | |
reg = <0x7e00b200 0x200>; | |
}; | |
- leds: leds { | |
- compatible = "gpio-leds"; | |
- | |
- act_led: act { | |
- gpios = <0x8 0x2f 0x0>; | |
- label = "led0"; | |
- linux,default-trigger = "mmc0"; | |
- linux,phandle = <0x1e>; | |
- phandle = <0x1e>; | |
- }; | |
- | |
- pwr_led: pwr { | |
- gpios = <0x8 0x23 0x0>; | |
- label = "led1"; | |
- linux,default-trigger = "input"; | |
- linux,phandle = <0x1f>; | |
- phandle = <0x1f>; | |
- }; | |
- }; | |
- | |
local_intc: local_intc { | |
#interrupt-cells = <0x1>; | |
compatible = "brcm,bcm2836-l1-intc"; | |
@@ -414,18 +414,21 @@ | |
pixelvalve0: pixelvalve@7e206000 { | |
compatible = "brcm,bcm2835-pixelvalve0"; | |
+ interrupts = <0x2 0xd>; | |
reg = <0x7e206000 0x100>; | |
status = "disabled"; | |
}; | |
pixelvalve1: pixelvalve@7e207000 { | |
compatible = "brcm,bcm2835-pixelvalve1"; | |
+ interrupts = <0x2 0xe>; | |
reg = <0x7e207000 0x100>; | |
status = "disabled"; | |
}; | |
pixelvalve2: pixelvalve@7e807000 { | |
compatible = "brcm,bcm2835-pixelvalve2"; | |
+ interrupts = <0x2 0xa>; | |
reg = <0x7e807000 0x100>; | |
status = "disabled"; | |
}; | |
@@ -434,8 +437,8 @@ | |
#power-domain-cells = <0x1>; | |
compatible = "raspberrypi,bcm2835-power"; | |
firmware = <0x11>; | |
- linux,phandle = <0xf>; | |
- phandle = <0xf>; | |
+ linux,phandle = <0xe>; | |
+ phandle = <0xe>; | |
}; | |
pwm: pwm@7e20c000 { | |
@@ -453,7 +456,6 @@ | |
linux,phandle = <0x22>; | |
phandle = <0x22>; | |
reg = <0x7e104000 0x10>; | |
- status = "okay"; | |
}; | |
sdhost: sdhost@7e202000 { | |
@@ -467,7 +469,7 @@ | |
interrupts = <0x2 0x18>; | |
linux,phandle = <0x23>; | |
phandle = <0x23>; | |
- pinctrl-0 = <0x6>; | |
+ pinctrl-0 = <0xf>; | |
pinctrl-names = "default"; | |
reg = <0x7e202000 0x100>; | |
status = "okay"; | |
@@ -486,7 +488,7 @@ | |
}; | |
uart1: serial@7e215040 { | |
- clocks = <0xc 0x0>; | |
+ clocks = <0xb 0x0>; | |
compatible = "brcm,bcm2835-aux-uart"; | |
interrupts = <0x1 0x1d>; | |
linux,phandle = <0x19>; | |
@@ -511,18 +513,18 @@ | |
status = "disabled"; | |
}; | |
- spi0: spi@7e204000 { | |
+ spi0: spi: spi@7e204000 { | |
#address-cells = <0x1>; | |
#size-cells = <0x0>; | |
clocks = <0x4 0x14>; | |
compatible = "brcm,bcm2835-spi"; | |
- cs-gpios = <0x8 0x8 0x1 0x8 0x7 0x1>; | |
+ cs-gpios = <0x9 0x8 0x1 0x9 0x7 0x1>; | |
dma-names = "tx", "rx"; | |
dmas = <0x5 0x6 0x5 0x7>; | |
interrupts = <0x2 0x16>; | |
linux,phandle = <0x1b>; | |
phandle = <0x1b>; | |
- pinctrl-0 = <0x9 0xa>; | |
+ pinctrl-0 = <0x7 0x8>; | |
pinctrl-names = "default"; | |
reg = <0x7e204000 0x1000>; | |
status = "disabled"; | |
@@ -547,17 +549,17 @@ | |
spi1: spi@7e215080 { | |
#address-cells = <0x1>; | |
#size-cells = <0x0>; | |
- clocks = <0xc 0x1>; | |
+ clocks = <0xb 0x1>; | |
compatible = "brcm,bcm2835-aux-spi"; | |
interrupts = <0x1 0x1d>; | |
reg = <0x7e215080 0x40>; | |
status = "disabled"; | |
}; | |
- spi2: spi@7e2150C0 { | |
+ spi2: spi@7e2150c0 { | |
#address-cells = <0x1>; | |
#size-cells = <0x0>; | |
- clocks = <0xc 0x2>; | |
+ clocks = <0xb 0x2>; | |
compatible = "brcm,bcm2835-aux-spi"; | |
interrupts = <0x1 0x1d>; | |
reg = <0x7e2150c0 0x40>; | |
@@ -574,15 +576,9 @@ | |
firmware = <0x11>; | |
}; | |
- timer { | |
- always-on; | |
- clock-frequency = <0x124f800>; | |
- compatible = "arm,armv7-timer"; | |
- interrupt-parent = <0x2>; | |
- interrupts = <0x0 0x1 0x3 0x2>; | |
- }; | |
- | |
usb: usb@7e980000 { | |
+ #address-cells = <0x1>; | |
+ #size-cells = <0x0>; | |
compatible = "brcm,bcm2708-usb"; | |
interrupts = <0x2 0x0 0x1 0x9>; | |
reg = <0x7e980000 0x10000 0x7e006000 0x1000>; | |
@@ -590,6 +586,7 @@ | |
v3d: v3d@7ec00000 { | |
compatible = "brcm,vc4-v3d"; | |
+ interrupts = <0x1 0xa>; | |
reg = <0x7ec00000 0x1000>; | |
status = "disabled"; | |
}; | |
@@ -609,7 +606,14 @@ | |
linux,phandle = <0x21>; | |
phandle = <0x21>; | |
reg = <0x7e100000 0x28>; | |
- status = "okay"; | |
}; | |
}; | |
+ | |
+ timer { | |
+ always-on; | |
+ clock-frequency = <0x124f800>; | |
+ compatible = "arm,armv7-timer"; | |
+ interrupt-parent = <0x2>; | |
+ interrupts = <0x0 0x1 0x3 0x2>; | |
+ }; | |
}; |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment