[PATCH v7 2/3] ARM: bcm2835: Add the Raspberry Pi firmware driver

ARM--bcm2835-Add-the-Raspberry-Pi-firmware-driver.patch

Return-Path: <linux-rpi-kernel-bounces+notro=tronnes.org@lists.infradead.org>
Received: from bombadil.infradead.org (bombadil.infradead.org [IPv6:2001:1868:205:0:0:0:0:9])
	by mx02.domeneshop.no (8.15.1/8.15.1) with ESMTPS id t54KE6Ke015514
	(version=TLSv1.2 cipher=DHE-RSA-AES256-GCM-SHA384 bits=256 verify=NO)
	for <notro@tronnes.org>; Thu, 4 Jun 2015 22:14:08 +0200
Received: from localhost ([127.0.0.1] helo=bombadil.infradead.org)
	by bombadil.infradead.org with esmtp (Exim 4.80.1 #2 (Red Hat Linux))
	id 1Z0bVU-0003QW-Fa; Thu, 04 Jun 2015 20:12:52 +0000
Received: from gabe.freedesktop.org ([131.252.210.177])
 by bombadil.infradead.org with esmtp (Exim 4.80.1 #2 (Red Hat Linux))
 id 1Z0bUq-0003Ax-3O; Thu, 04 Jun 2015 20:12:15 +0000
Received: from annarchy.freedesktop.org (annarchy.freedesktop.org
 [131.252.210.176])
 by gabe.freedesktop.org (Postfix) with ESMTP id 85EB26E109;
 Thu,  4 Jun 2015 13:11:48 -0700 (PDT)
Received: from eliezer.anholt.net (annarchy.freedesktop.org [127.0.0.1])
 by annarchy.freedesktop.org (Postfix) with ESMTP id 652EF18488;
 Thu,  4 Jun 2015 13:11:48 -0700 (PDT)
Received: by eliezer.anholt.net (Postfix, from userid 1000)
 id D0E9FF0077A; Thu,  4 Jun 2015 13:11:47 -0700 (PDT)
From: Eric Anholt <eric@anholt.net>
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v7 2/3] ARM: bcm2835: Add the Raspberry Pi firmware driver
Date: Thu,  4 Jun 2015 13:11:46 -0700
Message-Id: <1433448707-18104-2-git-send-email-eric@anholt.net>
X-Mailer: git-send-email 2.1.4
In-Reply-To: <1433448707-18104-1-git-send-email-eric@anholt.net>
References: <1433448707-18104-1-git-send-email-eric@anholt.net>
MIME-Version: 1.0
X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3
X-CRM114-CacheID: sfid-20150604_131212_283180_1B00230C
X-CRM114-Status: GOOD (  31.36  )
X-Spam-Score: -2.3 (--)
X-Spam-Report: SpamAssassin version 3.4.0 on bombadil.infradead.org summary:
 Content analysis details:   (-2.3 points)
 pts rule name              description
 ---- ---------------------- --------------------------------------------------
 -2.3 RCVD_IN_DNSWL_MED      RBL: Sender listed at http://www.dnswl.org/, medium
 trust [131.252.210.177 listed in list.dnswl.org]
Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
        linux-rpi-kernel@lists.infradead.org
X-BeenThere: linux-rpi-kernel@lists.infradead.org
X-Mailman-Version: 2.1.18-1
Precedence: list
List-Id: <linux-rpi-kernel.lists.infradead.org>
List-Unsubscribe: <http://lists.infradead.org/mailman/options/linux-rpi-kernel>,
 <mailto:linux-rpi-kernel-request@lists.infradead.org?subject=unsubscribe>
List-Archive: <http://lists.infradead.org/pipermail/linux-rpi-kernel/>
List-Post: <mailto:linux-rpi-kernel@lists.infradead.org>
List-Help: <mailto:linux-rpi-kernel-request@lists.infradead.org?subject=help>
List-Subscribe: <http://lists.infradead.org/mailman/listinfo/linux-rpi-kernel>,
 <mailto:linux-rpi-kernel-request@lists.infradead.org?subject=subscribe>
Content-Type: text/plain; charset="utf-8"
Sender: "linux-rpi-kernel" <linux-rpi-kernel-bounces@lists.infradead.org>
Errors-To: linux-rpi-kernel-bounces+notro=tronnes.org@lists.infradead.org
X-Spam-Status: No, hits=0.5 required=5.0
X-Virus-Scanned: by moam (http://www.moam.net/)
X-Moam-Version: 0.97
Content-Transfer-Encoding: 8bit
X-MIME-Autoconverted: from base64 to 8bit by mx02.domeneshop.no id t54KE6Ke015514

This gives us a function for making mailbox property channel requests
of the firmware, which is most notable in that it will let us get and
set clock rates.

Signed-off-by: Eric Anholt <eric@anholt.net>
---

v2: Drop power-domains stuff for now since we don't have the driver
    core support to make it useful.  Move to drivers/firmware/.
    Capitalize the enums.  De-global the firmware variable.  Use the
    firmware device to allocate our DMA buffer, so that the dma-ranges
    DT property gets respected.  Simplify the property tag transaction
    interface even more, leaving a multi-tag interface still
    available.  For conciseness, rename "raspberrypi" to "rpi" on all
    functions/enums/structs, and the "firmware" variable to "fw".
    Print when the driver is probed successfully, since debugging
    -EPROBE_DEFER handling is such a big part of bcm2835 development.
    Drop -EBUSY mailbox handling since the mailbox core has been fixed
    to return -EPROBE_DEFER in -next.

v3: Use kernel-doc style for big comments (from Noralf), drop stale
    comment, use "dev" when freeing DMA as well.

v4: Move description comment into copyright comment, drop a dead
    initialization of "ret", and print the firmware revision at probe
    time.

v5: Rename the compatible to "raspberrypi,bcm2835-firmware", move
    include to not say "property", add functions to get struct
    rpi_firmware from the device_node and put when done, make property
    functions take the rpi_firmware instead and never return
    -EPROBE_DEFER, put the driver under its own RASPBERRYPI_FIRMWARE
    Kconfig.

v6: Drop the try_module_get/module_put stuff, since all clients will
    be referencing our symbols in order to call those functions,
    anyway.  Fix the kerneldoc comments for the changes in v5.

 drivers/firmware/Kconfig                   |   7 +
 drivers/firmware/Makefile                  |   1 +
 drivers/firmware/raspberrypi.c             | 260 +++++++++++++++++++++++++++++
 include/soc/bcm2835/raspberrypi-firmware.h | 115 +++++++++++++
 4 files changed, 383 insertions(+)
 create mode 100644 drivers/firmware/raspberrypi.c
 create mode 100644 include/soc/bcm2835/raspberrypi-firmware.h

diff --git a/drivers/firmware/Kconfig b/drivers/firmware/Kconfig
index 6517132..564aa5b 100644
--- a/drivers/firmware/Kconfig
+++ b/drivers/firmware/Kconfig
@@ -136,6 +136,13 @@ config QCOM_SCM
 	bool
 	depends on ARM || ARM64

+config RASPBERRYPI_FIRMWARE
+	tristate "Raspberry Pi Firmware Driver"
+	depends on BCM2835_MBOX
+	help
+	  This option enables support for communicating with the firmware on the
+	  Raspberry Pi.
+
 source "drivers/firmware/google/Kconfig"
 source "drivers/firmware/efi/Kconfig"

diff --git a/drivers/firmware/Makefile b/drivers/firmware/Makefile
index 3fdd391..ee101a2 100644
--- a/drivers/firmware/Makefile
+++ b/drivers/firmware/Makefile
@@ -13,6 +13,7 @@ obj-$(CONFIG_ISCSI_IBFT)	+= iscsi_ibft.o
 obj-$(CONFIG_FIRMWARE_MEMMAP)	+= memmap.o
 obj-$(CONFIG_QCOM_SCM)		+= qcom_scm.o
 CFLAGS_qcom_scm.o :=$(call as-instr,.arch_extension sec,-DREQUIRES_SEC=1)
+obj-$(CONFIG_RASPBERRYPI_FIRMWARE) += raspberrypi.o

 obj-$(CONFIG_GOOGLE_FIRMWARE)	+= google/
 obj-$(CONFIG_EFI)		+= efi/
diff --git a/drivers/firmware/raspberrypi.c b/drivers/firmware/raspberrypi.c
new file mode 100644
index 0000000..dd506cd
--- /dev/null
+++ b/drivers/firmware/raspberrypi.c
@@ -0,0 +1,260 @@
+/*
+ * Defines interfaces for interacting wtih the Raspberry Pi firmware's
+ * property channel.
+ *
+ * Copyright © 2015 Broadcom
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/dma-mapping.h>
+#include <linux/mailbox_client.h>
+#include <linux/module.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <soc/bcm2835/raspberrypi-firmware.h>
+
+#define MBOX_MSG(chan, data28)		(((data28) & ~0xf) | ((chan) & 0xf))
+#define MBOX_CHAN(msg)			((msg) & 0xf)
+#define MBOX_DATA28(msg)		((msg) & ~0xf)
+#define MBOX_CHAN_PROPERTY		8
+
+struct rpi_firmware {
+	struct mbox_client cl;
+	struct mbox_chan *chan; /* The property channel. */
+	struct completion c;
+	u32 enabled;
+};
+
+static DEFINE_MUTEX(transaction_lock);
+
+static void response_callback(struct mbox_client *cl, void *msg)
+{
+	struct rpi_firmware *fw = container_of(cl, struct rpi_firmware, cl);
+	complete(&fw->c);
+}
+
+/*
+ * Sends a request to the firmware through the BCM2835 mailbox driver,
+ * and synchronously waits for the reply.
+ */
+static int
+rpi_firmware_transaction(struct rpi_firmware *fw, u32 chan, u32 data)
+{
+	u32 message = MBOX_MSG(chan, data);
+	int ret;
+
+	WARN_ON(data & 0xf);
+
+	mutex_lock(&transaction_lock);
+	reinit_completion(&fw->c);
+	ret = mbox_send_message(fw->chan, &message);
+	if (ret >= 0) {
+		wait_for_completion(&fw->c);
+		ret = 0;
+	} else {
+		dev_err(fw->cl.dev, "mbox_send_message returned %d\n", ret);
+	}
+	mutex_unlock(&transaction_lock);
+
+	return ret;
+}
+
+/**
+ * rpi_firmware_property_list - Submit firmware property list
+ * @fw:		Pointer to firmware structure from rpi_firmware_get().
+ * @data:	Buffer holding tags.
+ * @tag_size:	Size of tags buffer.
+ *
+ * Submits a set of concatenated tags to the VPU firmware through the
+ * mailbox property interface.
+ *
+ * The buffer header and the ending tag are added by this function and
+ * don't need to be supplied, just the actual tags for your operation.
+ * See struct rpi_firmware_property_tag_header for the per-tag
+ * structure.
+ */
+int rpi_firmware_property_list(struct rpi_firmware *fw,
+			       void *data, size_t tag_size)
+{
+	size_t size = tag_size + 12;
+	u32 *buf;
+	dma_addr_t bus_addr;
+	int ret;
+
+	/* Packets are processed a dword at a time. */
+	if (size & 3)
+		return -EINVAL;
+
+	buf = dma_alloc_coherent(fw->cl.dev, PAGE_ALIGN(size), &bus_addr,
+				 GFP_ATOMIC);
+	if (!buf)
+		return -ENOMEM;
+
+	/* The firmware will error out without parsing in this case. */
+	WARN_ON(size >= 1024 * 1024);
+
+	buf[0] = size;
+	buf[1] = RPI_FIRMWARE_STATUS_REQUEST;
+	memcpy(&buf[2], data, tag_size);
+	buf[size / 4 - 1] = RPI_FIRMWARE_PROPERTY_END;
+	wmb();
+
+	ret = rpi_firmware_transaction(fw, MBOX_CHAN_PROPERTY, bus_addr);
+
+	rmb();
+	memcpy(data, &buf[2], tag_size);
+	if (ret == 0 && buf[1] != RPI_FIRMWARE_STATUS_SUCCESS) {
+		/*
+		 * The tag name here might not be the one causing the
+		 * error, if there were multiple tags in the request.
+		 * But single-tag is the most common, so go with it.
+		 */
+		dev_err(fw->cl.dev, "Request 0x%08x returned status 0x%08x\n",
+			buf[2], buf[1]);
+		ret = -EINVAL;
+	}
+
+	dma_free_coherent(fw->cl.dev, PAGE_ALIGN(size), buf, bus_addr);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(rpi_firmware_property_list);
+
+/**
+ * rpi_firmware_property - Submit single firmware property
+ * @fw:		Pointer to firmware structure from rpi_firmware_get().
+ * @tag:	One of enum_mbox_property_tag.
+ * @tag_data:	Tag data buffer.
+ * @buf_size:	Buffer size.
+ *
+ * Submits a single tag to the VPU firmware through the mailbox
+ * property interface.
+ *
+ * This is a convenience wrapper around
+ * rpi_firmware_property_list() to avoid some of the
+ * boilerplate in property calls.
+ */
+int rpi_firmware_property(struct rpi_firmware *fw,
+			  u32 tag, void *tag_data, size_t buf_size)
+{
+	/* Single tags are very small (generally 8 bytes), so the
+	 * stack should be safe.
+	 */
+	u8 data[buf_size + sizeof(struct rpi_firmware_property_tag_header)];
+	struct rpi_firmware_property_tag_header *header =
+		(struct rpi_firmware_property_tag_header *)data;
+	int ret;
+
+	header->tag = tag;
+	header->buf_size = buf_size;
+	header->req_resp_size = 0;
+	memcpy(data + sizeof(struct rpi_firmware_property_tag_header),
+	       tag_data, buf_size);
+
+	ret = rpi_firmware_property_list(fw, &data, sizeof(data));
+	memcpy(tag_data,
+	       data + sizeof(struct rpi_firmware_property_tag_header),
+	       buf_size);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(rpi_firmware_property);
+
+static void
+rpi_firmware_print_firmware_revision(struct rpi_firmware *fw)
+{
+	u32 packet;
+	int ret = rpi_firmware_property(fw,
+					RPI_FIRMWARE_GET_FIRMWARE_REVISION,
+					&packet, sizeof(packet));
+
+	if (ret == 0) {
+		struct tm tm;
+
+		time_to_tm(packet, 0, &tm);
+
+		dev_info(fw->cl.dev,
+			 "Attached to firmware from %04ld-%02d-%02d %02d:%02d\n",
+			 tm.tm_year + 1900, tm.tm_mon + 1, tm.tm_mday,
+			 tm.tm_hour, tm.tm_min);
+	}
+}
+
+static int rpi_firmware_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct rpi_firmware *fw;
+
+	fw = devm_kzalloc(dev, sizeof(*fw), GFP_KERNEL);
+	if (!fw)
+		return -ENOMEM;
+
+	fw->cl.dev = dev;
+	fw->cl.rx_callback = response_callback;
+	fw->cl.tx_block = true;
+
+	fw->chan = mbox_request_channel(&fw->cl, 0);
+	if (IS_ERR(fw->chan)) {
+		int ret = PTR_ERR(fw->chan);
+		if (ret != -EPROBE_DEFER)
+			dev_err(dev, "Failed to get mbox channel: %d\n", ret);
+		return ret;
+	}
+
+	init_completion(&fw->c);
+
+	platform_set_drvdata(pdev, fw);
+
+	rpi_firmware_print_firmware_revision(fw);
+
+	return 0;
+}
+
+static int rpi_firmware_remove(struct platform_device *pdev)
+{
+	struct rpi_firmware *fw = platform_get_drvdata(pdev);
+
+	mbox_free_channel(fw->chan);
+
+	return 0;
+}
+
+/**
+ * rpi_firmware_get - Get pointer to rpi_firmware structure.
+ * @firmware_node:    Pointer to the firmware Device Tree node.
+ *
+ * Returns NULL is the firmware device is not ready.
+ */
+struct rpi_firmware *rpi_firmware_get(struct device_node *firmware_node)
+{
+	struct platform_device *pdev = of_find_device_by_node(firmware_node);
+
+	if (!pdev)
+		return NULL;
+
+	return platform_get_drvdata(pdev);
+}
+EXPORT_SYMBOL_GPL(rpi_firmware_get);
+
+static const struct of_device_id rpi_firmware_of_match[] = {
+	{ .compatible = "raspberrypi,bcm2835-firmware", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, rpi_firmware_of_match);
+
+static struct platform_driver rpi_firmware_driver = {
+	.driver = {
+		.name = "raspberrypi-firmware",
+		.of_match_table = rpi_firmware_of_match,
+	},
+	.probe		= rpi_firmware_probe,
+	.remove		= rpi_firmware_remove,
+};
+module_platform_driver(rpi_firmware_driver);
+
+MODULE_AUTHOR("Eric Anholt <eric@anholt.net>");
+MODULE_DESCRIPTION("Raspberry Pi firmware driver");
+MODULE_LICENSE("GPL v2");
diff --git a/include/soc/bcm2835/raspberrypi-firmware.h b/include/soc/bcm2835/raspberrypi-firmware.h
new file mode 100644
index 0000000..9d9efb7
--- /dev/null
+++ b/include/soc/bcm2835/raspberrypi-firmware.h
@@ -0,0 +1,115 @@
+/*
+ *  Copyright © 2015 Broadcom
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/types.h>
+#include <linux/of_device.h>
+
+struct rpi_firmware;
+
+enum rpi_firmware_property_status {
+	RPI_FIRMWARE_STATUS_REQUEST = 0,
+	RPI_FIRMWARE_STATUS_SUCCESS = 0x80000000,
+	RPI_FIRMWARE_STATUS_ERROR =   0x80000001,
+};
+
+/**
+ * struct rpi_firmware_property_tag_header - Firmware property tag header
+ * @tag:		One of enum_mbox_property_tag.
+ * @buf_size:		The number of bytes in the value buffer following this
+ *			struct.
+ * @req_resp_size:	On submit, the length of the request (though it doesn't
+ *			appear to be currently used by the firmware).  On return,
+ *			the length of the response (always 4 byte aligned), with
+ *			the low bit set.
+ */
+struct rpi_firmware_property_tag_header {
+	u32 tag;
+	u32 buf_size;
+	u32 req_resp_size;
+};
+
+enum rpi_firmware_property_tag {
+	RPI_FIRMWARE_PROPERTY_END =                           0,
+	RPI_FIRMWARE_GET_FIRMWARE_REVISION =                  0x00000001,
+
+	RPI_FIRMWARE_SET_CURSOR_INFO =                        0x00008010,
+	RPI_FIRMWARE_SET_CURSOR_STATE =                       0x00008011,
+
+	RPI_FIRMWARE_GET_BOARD_MODEL =                        0x00010001,
+	RPI_FIRMWARE_GET_BOARD_REVISION =                     0x00010002,
+	RPI_FIRMWARE_GET_BOARD_MAC_ADDRESS =                  0x00010003,
+	RPI_FIRMWARE_GET_BOARD_SERIAL =                       0x00010004,
+	RPI_FIRMWARE_GET_ARM_MEMORY =                         0x00010005,
+	RPI_FIRMWARE_GET_VC_MEMORY =                          0x00010006,
+	RPI_FIRMWARE_GET_CLOCKS =                             0x00010007,
+	RPI_FIRMWARE_GET_POWER_STATE =                        0x00020001,
+	RPI_FIRMWARE_GET_TIMING =                             0x00020002,
+	RPI_FIRMWARE_SET_POWER_STATE =                        0x00028001,
+	RPI_FIRMWARE_GET_CLOCK_STATE =                        0x00030001,
+	RPI_FIRMWARE_GET_CLOCK_RATE =                         0x00030002,
+	RPI_FIRMWARE_GET_VOLTAGE =                            0x00030003,
+	RPI_FIRMWARE_GET_MAX_CLOCK_RATE =                     0x00030004,
+	RPI_FIRMWARE_GET_MAX_VOLTAGE =                        0x00030005,
+	RPI_FIRMWARE_GET_TEMPERATURE =                        0x00030006,
+	RPI_FIRMWARE_GET_MIN_CLOCK_RATE =                     0x00030007,
+	RPI_FIRMWARE_GET_MIN_VOLTAGE =                        0x00030008,
+	RPI_FIRMWARE_GET_TURBO =                              0x00030009,
+	RPI_FIRMWARE_GET_MAX_TEMPERATURE =                    0x0003000a,
+	RPI_FIRMWARE_ALLOCATE_MEMORY =                        0x0003000c,
+	RPI_FIRMWARE_LOCK_MEMORY =                            0x0003000d,
+	RPI_FIRMWARE_UNLOCK_MEMORY =                          0x0003000e,
+	RPI_FIRMWARE_RELEASE_MEMORY =                         0x0003000f,
+	RPI_FIRMWARE_EXECUTE_CODE =                           0x00030010,
+	RPI_FIRMWARE_EXECUTE_QPU =                            0x00030011,
+	RPI_FIRMWARE_SET_ENABLE_QPU =                         0x00030012,
+	RPI_FIRMWARE_GET_DISPMANX_RESOURCE_MEM_HANDLE =       0x00030014,
+	RPI_FIRMWARE_GET_EDID_BLOCK =                         0x00030020,
+	RPI_FIRMWARE_SET_CLOCK_STATE =                        0x00038001,
+	RPI_FIRMWARE_SET_CLOCK_RATE =                         0x00038002,
+	RPI_FIRMWARE_SET_VOLTAGE =                            0x00038003,
+	RPI_FIRMWARE_SET_TURBO =                              0x00038009,
+
+	/* Dispmanx TAGS */
+	RPI_FIRMWARE_FRAMEBUFFER_ALLOCATE =                   0x00040001,
+	RPI_FIRMWARE_FRAMEBUFFER_BLANK =                      0x00040002,
+	RPI_FIRMWARE_FRAMEBUFFER_GET_PHYSICAL_WIDTH_HEIGHT =  0x00040003,
+	RPI_FIRMWARE_FRAMEBUFFER_GET_VIRTUAL_WIDTH_HEIGHT =   0x00040004,
+	RPI_FIRMWARE_FRAMEBUFFER_GET_DEPTH =                  0x00040005,
+	RPI_FIRMWARE_FRAMEBUFFER_GET_PIXEL_ORDER =            0x00040006,
+	RPI_FIRMWARE_FRAMEBUFFER_GET_ALPHA_MODE =             0x00040007,
+	RPI_FIRMWARE_FRAMEBUFFER_GET_PITCH =                  0x00040008,
+	RPI_FIRMWARE_FRAMEBUFFER_GET_VIRTUAL_OFFSET =         0x00040009,
+	RPI_FIRMWARE_FRAMEBUFFER_GET_OVERSCAN =               0x0004000a,
+	RPI_FIRMWARE_FRAMEBUFFER_GET_PALETTE =                0x0004000b,
+	RPI_FIRMWARE_FRAMEBUFFER_RELEASE =                    0x00048001,
+	RPI_FIRMWARE_FRAMEBUFFER_TEST_PHYSICAL_WIDTH_HEIGHT = 0x00044003,
+	RPI_FIRMWARE_FRAMEBUFFER_TEST_VIRTUAL_WIDTH_HEIGHT =  0x00044004,
+	RPI_FIRMWARE_FRAMEBUFFER_TEST_DEPTH =                 0x00044005,
+	RPI_FIRMWARE_FRAMEBUFFER_TEST_PIXEL_ORDER =           0x00044006,
+	RPI_FIRMWARE_FRAMEBUFFER_TEST_ALPHA_MODE =            0x00044007,
+	RPI_FIRMWARE_FRAMEBUFFER_TEST_VIRTUAL_OFFSET =        0x00044009,
+	RPI_FIRMWARE_FRAMEBUFFER_TEST_OVERSCAN =              0x0004400a,
+	RPI_FIRMWARE_FRAMEBUFFER_TEST_PALETTE =               0x0004400b,
+	RPI_FIRMWARE_FRAMEBUFFER_SET_PHYSICAL_WIDTH_HEIGHT =  0x00048003,
+	RPI_FIRMWARE_FRAMEBUFFER_SET_VIRTUAL_WIDTH_HEIGHT =   0x00048004,
+	RPI_FIRMWARE_FRAMEBUFFER_SET_DEPTH =                  0x00048005,
+	RPI_FIRMWARE_FRAMEBUFFER_SET_PIXEL_ORDER =            0x00048006,
+	RPI_FIRMWARE_FRAMEBUFFER_SET_ALPHA_MODE =             0x00048007,
+	RPI_FIRMWARE_FRAMEBUFFER_SET_VIRTUAL_OFFSET =         0x00048009,
+	RPI_FIRMWARE_FRAMEBUFFER_SET_OVERSCAN =               0x0004800a,
+	RPI_FIRMWARE_FRAMEBUFFER_SET_PALETTE =                0x0004800b,
+
+	RPI_FIRMWARE_GET_COMMAND_LINE =                       0x00050001,
+	RPI_FIRMWARE_GET_DMA_CHANNELS =                       0x00060001,
+};
+
+int rpi_firmware_property(struct rpi_firmware *fw,
+			  u32 tag, void *data, size_t len);
+int rpi_firmware_property_list(struct rpi_firmware *fw,
+			       void *data, size_t tag_size);
+struct rpi_firmware *rpi_firmware_get(struct device_node *firmware_node);
--
2.1.4


_______________________________________________
linux-rpi-kernel mailing list
linux-rpi-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rpi-kernel