-
-
Save ntova/920fbe512de4f66cb6452c9cf1fb89b7 to your computer and use it in GitHub Desktop.
lsusb -v output on RPi4 with firmware 137ac
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| can't get debug descriptor: Resource temporarily unavailable | |
| Bus 002 Device 002: ID 152d:2509 JMicron Technology Corp. / JMicron USA Technology Corp. JMS539, JMS551 SATA 3Gb/s bridge | |
| Device Descriptor: | |
| bLength 18 | |
| bDescriptorType 1 | |
| bcdUSB 3.00 | |
| bDeviceClass 0 | |
| bDeviceSubClass 0 | |
| bDeviceProtocol 0 | |
| bMaxPacketSize0 9 | |
| idVendor 0x152d JMicron Technology Corp. / JMicron USA Technology Corp. | |
| idProduct 0x2509 JMS539, JMS551 SATA 3Gb/s bridge | |
| bcdDevice 1.07 | |
| iManufacturer 10 JMicron Manu | |
| iProduct 11 Usb production | |
| iSerial 3 00A1234567E7 | |
| bNumConfigurations 1 | |
| Configuration Descriptor: | |
| bLength 9 | |
| bDescriptorType 2 | |
| wTotalLength 0x002c | |
| bNumInterfaces 1 | |
| bConfigurationValue 1 | |
| iConfiguration 0 | |
| bmAttributes 0xc0 | |
| Self Powered | |
| MaxPower 8mA | |
| Interface Descriptor: | |
| bLength 9 | |
| bDescriptorType 4 | |
| bInterfaceNumber 0 | |
| bAlternateSetting 0 | |
| bNumEndpoints 2 | |
| bInterfaceClass 8 Mass Storage | |
| bInterfaceSubClass 6 SCSI | |
| bInterfaceProtocol 80 Bulk-Only | |
| iInterface 0 | |
| Endpoint Descriptor: | |
| bLength 7 | |
| bDescriptorType 5 | |
| bEndpointAddress 0x81 EP 1 IN | |
| bmAttributes 2 | |
| Transfer Type Bulk | |
| Synch Type None | |
| Usage Type Data | |
| wMaxPacketSize 0x0400 1x 1024 bytes | |
| bInterval 0 | |
| bMaxBurst 15 | |
| Endpoint Descriptor: | |
| bLength 7 | |
| bDescriptorType 5 | |
| bEndpointAddress 0x02 EP 2 OUT | |
| bmAttributes 2 | |
| Transfer Type Bulk | |
| Synch Type None | |
| Usage Type Data | |
| wMaxPacketSize 0x0400 1x 1024 bytes | |
| bInterval 0 | |
| bMaxBurst 15 | |
| Binary Object Store Descriptor: | |
| bLength 5 | |
| bDescriptorType 15 | |
| wTotalLength 0x002a | |
| bNumDeviceCaps 3 | |
| USB 2.0 Extension Device Capability: | |
| bLength 7 | |
| bDescriptorType 16 | |
| bDevCapabilityType 2 | |
| bmAttributes 0x00000002 | |
| HIRD Link Power Management (LPM) Supported | |
| SuperSpeed USB Device Capability: | |
| bLength 10 | |
| bDescriptorType 16 | |
| bDevCapabilityType 3 | |
| bmAttributes 0x00 | |
| wSpeedsSupported 0x000e | |
| Device can operate at Full Speed (12Mbps) | |
| Device can operate at High Speed (480Mbps) | |
| Device can operate at SuperSpeed (5Gbps) | |
| bFunctionalitySupport 1 | |
| Lowest fully-functional device speed is Full Speed (12Mbps) | |
| bU1DevExitLat 10 micro seconds | |
| bU2DevExitLat 32 micro seconds | |
| Container ID Device Capability: | |
| bLength 20 | |
| bDescriptorType 16 | |
| bDevCapabilityType 4 | |
| bReserved 0 | |
| ContainerID {03020100-0504-0706-0800-000000000000} | |
| Device Status: 0x0001 | |
| Self Powered | |
| Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub | |
| Device Descriptor: | |
| bLength 18 | |
| bDescriptorType 1 | |
| bcdUSB 3.00 | |
| bDeviceClass 9 Hub | |
| bDeviceSubClass 0 | |
| bDeviceProtocol 3 | |
| bMaxPacketSize0 9 | |
| idVendor 0x1d6b Linux Foundation | |
| idProduct 0x0003 3.0 root hub | |
| bcdDevice 4.19 | |
| iManufacturer 3 Linux 4.19.88-1-ARCH xhci-hcd | |
| iProduct 2 xHCI Host Controller | |
| iSerial 1 0000:01:00.0 | |
| bNumConfigurations 1 | |
| Configuration Descriptor: | |
| bLength 9 | |
| bDescriptorType 2 | |
| wTotalLength 0x001f | |
| bNumInterfaces 1 | |
| bConfigurationValue 1 | |
| iConfiguration 0 | |
| bmAttributes 0xe0 | |
| Self Powered | |
| Remote Wakcan't get debug descriptor: Resource temporarily unavailable | |
| eup | |
| MaxPower 0mA | |
| Interface Descriptor: | |
| bLength 9 | |
| bDescriptorType 4 | |
| bInterfaceNumber 0 | |
| bAlternateSetting 0 | |
| bNumEndpoints 1 | |
| bInterfaceClass 9 Hub | |
| bInterfaceSubClass 0 | |
| bInterfaceProtocol 0 Full speed (or root) hub | |
| iInterface 0 | |
| Endpoint Descriptor: | |
| bLength 7 | |
| bDescriptorType 5 | |
| bEndpointAddress 0x81 EP 1 IN | |
| bmAttributes 3 | |
| Transfer Type Interrupt | |
| Synch Type None | |
| Usage Type Data | |
| wMaxPacketSize 0x0004 1x 4 bytes | |
| bInterval 12 | |
| bMaxBurst 0 | |
| Hub Descriptor: | |
| bLength 12 | |
| bDescriptorType 42 | |
| nNbrPorts 4 | |
| wHubCharacteristic 0x0009 | |
| Per-port power switching | |
| Per-port overcurrent protection | |
| bPwrOn2PwrGood 10 * 2 milli seconds | |
| bHubContrCurrent 0 milli Ampere | |
| bHubDecLat 0.0 micro seconds | |
| wHubDelay 0 nano seconds | |
| DeviceRemovable 0x00 | |
| Hub Port Status: | |
| Port 1: 0000.0203 5Gbps power U0 enable connect | |
| Port 2: 0000.02a0 5Gbps power Rx.Detect | |
| Port 3: 0000.02a0 5Gbps power Rx.Detect | |
| Port 4: 0000.02a0 5Gbps power Rx.Detect | |
| Binary Object Store Descriptor: | |
| bLength 5 | |
| bDescriptorType 15 | |
| wTotalLength 0x000f | |
| bNumDeviceCaps 1 | |
| SuperSpeed USB Device Capability: | |
| bLength 10 | |
| bDescriptorType 16 | |
| bDevCapabilityType 3 | |
| bmAttributes 0x02 | |
| Latency Tolerance Messages (LTM) Supported | |
| wSpeedsSupported 0x0008 | |
| Device can operate at SuperSpeed (5Gbps) | |
| bFunctionalitySupport 3 | |
| Lowest fully-functional device speed is SuperSpeed (5Gbps) | |
| bU1DevExitLat 4 micro seconds | |
| bU2DevExitLat 231 micro seconds | |
| Device Status: 0x0001 | |
| Self Powered | |
| Bus 001 Device 002: ID 2109:3431 VIA Labs, Inc. Hub | |
| Device Descriptor: | |
| bLength 18 | |
| bDescriptorType 1 | |
| bcdUSB 2.10 | |
| bDeviceClass 9 Hub | |
| bDeviceSubClass 0 | |
| bDeviceProtocol 1 Single TT | |
| bMaxPacketSize0 64 | |
| idVendor 0x2109 VIA Labs, Inc. | |
| idProduct 0x3431 Hub | |
| bcdDevice 4.21 | |
| iManufacturer 0 | |
| iProduct 1 USB2.0 Hub | |
| iSerial 0 | |
| bNumConfigurations 1 | |
| Configuration Descriptor: | |
| bLength 9 | |
| bDescriptorType 2 | |
| wTotalLength 0x0019 | |
| bNumInterfaces 1 | |
| bConfigurationValue 1 | |
| iConfiguration 0 | |
| bmAttributes 0xe0 | |
| Self Powered | |
| Remote Wakeup | |
| MaxPower 100mA | |
| Interface Descriptor: | |
| bLength 9 | |
| bDescriptorType 4 | |
| bInterfaceNumber 0 | |
| bAlternateSetting 0 | |
| bNumEndpoints 1 | |
| bInterfaceClass 9 Hub | |
| bInterfaceSubClass 0 | |
| bInterfaceProtocol 0 Full speed (or root) hub | |
| iInterface 0 | |
| Endpoint Descriptor: | |
| bLength 7 | |
| bDescriptorType 5 | |
| bEndpointAddress 0x81 EP 1 IN | |
| bmAttributes 3 | |
| Transfer Type Interrupt | |
| Synch Type None | |
| Usage Type Data | |
| wMaxPacketSize 0x0001 1x 1 bytes | |
| bInterval 12 | |
| Hub Descriptor: | |
| bLength 9 | |
| bDescriptorType 41 | |
| nNbrPorts 4 | |
| wHubCharacteristic 0x00e0 | |
| Ganged power switching | |
| Ganged overcurrent protection | |
| TT think time 32 FS bits | |
| Port indicators | |
| bPwrOn2PwrGood 50 * 2 milli seconds | |
| bHubContrCurrent 100 milli Ampere | |
| DeviceRemovable 0x00 | |
| PortPwrCtrlMask 0xff | |
| Hub Port Status: | |
| Port 1: 0000.0100 power | |
| Port 2: 0000.0100 power | |
| Port 3: 0000.0100 power | |
| Port 4: 0000.0100 power | |
| Binary Object Store Descriptor: | |
| bLength can't get debug descriptor: Resource temporarily unavailable | |
| can't get device qualifier: Resource temporarily unavailable | |
| can't get debug descriptor: Resource temporarily unavailable | |
| 5 | |
| bDescriptorType 15 | |
| wTotalLength 0x002a | |
| bNumDeviceCaps 3 | |
| USB 2.0 Extension Device Capability: | |
| bLength 7 | |
| bDescriptorType 16 | |
| bDevCapabilityType 2 | |
| bmAttributes 0x00000002 | |
| HIRD Link Power Management (LPM) Supported | |
| SuperSpeed USB Device Capability: | |
| bLength 10 | |
| bDescriptorType 16 | |
| bDevCapabilityType 3 | |
| bmAttributes 0x00 | |
| wSpeedsSupported 0x000e | |
| Device can operate at Full Speed (12Mbps) | |
| Device can operate at High Speed (480Mbps) | |
| Device can operate at SuperSpeed (5Gbps) | |
| bFunctionalitySupport 1 | |
| Lowest fully-functional device speed is Full Speed (12Mbps) | |
| bU1DevExitLat 4 micro seconds | |
| bU2DevExitLat 231 micro seconds | |
| Container ID Device Capability: | |
| bLength 20 | |
| bDescriptorType 16 | |
| bDevCapabilityType 4 | |
| bReserved 0 | |
| ContainerID {30eef35c-07d5-2549-b001-802d79434c30} | |
| Device Status: 0x0001 | |
| Self Powered | |
| Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub | |
| Device Descriptor: | |
| bLength 18 | |
| bDescriptorType 1 | |
| bcdUSB 2.00 | |
| bDeviceClass 9 Hub | |
| bDeviceSubClass 0 | |
| bDeviceProtocol 1 Single TT | |
| bMaxPacketSize0 64 | |
| idVendor 0x1d6b Linux Foundation | |
| idProduct 0x0002 2.0 root hub | |
| bcdDevice 4.19 | |
| iManufacturer 3 Linux 4.19.88-1-ARCH xhci-hcd | |
| iProduct 2 xHCI Host Controller | |
| iSerial 1 0000:01:00.0 | |
| bNumConfigurations 1 | |
| Configuration Descriptor: | |
| bLength 9 | |
| bDescriptorType 2 | |
| wTotalLength 0x0019 | |
| bNumInterfaces 1 | |
| bConfigurationValue 1 | |
| iConfiguration 0 | |
| bmAttributes 0xe0 | |
| Self Powered | |
| Remote Wakeup | |
| MaxPower 0mA | |
| Interface Descriptor: | |
| bLength 9 | |
| bDescriptorType 4 | |
| bInterfaceNumber 0 | |
| bAlternateSetting 0 | |
| bNumEndpoints 1 | |
| bInterfaceClass 9 Hub | |
| bInterfaceSubClass 0 | |
| bInterfaceProtocol 0 Full speed (or root) hub | |
| iInterface 0 | |
| Endpoint Descriptor: | |
| bLength 7 | |
| bDescriptorType 5 | |
| bEndpointAddress 0x81 EP 1 IN | |
| bmAttributes 3 | |
| Transfer Type Interrupt | |
| Synch Type None | |
| Usage Type Data | |
| wMaxPacketSize 0x0004 1x 4 bytes | |
| bInterval 12 | |
| Hub Descriptor: | |
| bLength 9 | |
| bDescriptorType 41 | |
| nNbrPorts 1 | |
| wHubCharacteristic 0x0009 | |
| Per-port power switching | |
| Per-port overcurrent protection | |
| TT think time 8 FS bits | |
| bPwrOn2PwrGood 10 * 2 milli seconds | |
| bHubContrCurrent 0 milli Ampere | |
| DeviceRemovable 0x02 | |
| PortPwrCtrlMask 0xff | |
| Hub Port Status: | |
| Port 1: 0000.0507 highspeed power suspend enable connect | |
| Device Status: 0x0001 | |
| Self Powered |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment