MP Delta Mini Settings

extruder1_end.gcode

M104 S0 ; turn off hotend heater
M140 S0 ; turn off bed heater
G91 ; Switch to use Relative Coordinates
G1 E-3 F700 ; retract the filament a bit before lifting the nozzle to release some of the pressure
G1 Z2 F1000 ; raise platform 2mm from current position
G1 E-2 F700 ; retract filament even more
G90 ; Switch back to using absolute coordinates
G28 X ; Return to home position. Without an X Y or Z after G28 the print completion time will not be displayed on the Mini Delta's display.
M84 ; disable motors
G4 S300 ; pause for 300 seconds to keep fan running to cool hotend and allow the fan to be turned off
M106 S0 ; fan off

extruder1_start.gcode

G90 ; switch to absolute positioning - this line was added in case Cura doesn't include it by default
M82 ; set extruder to absolute mode - this line was added in case Cura doesn't include it by default
G28 ; start from home position
G29 P2 Z0.20 ; probe the bed at 3 points with a 0.2mm overall vertical offset
G1 Z15.0 F4800  ; move the nozzle up 15mm
G92 E0 ; reset extrusion distance
G1 F200 E3 ; extrude 3mm of feed stock
G92 E0 ; reset extrusion distance again
G1 F4800

machine_end.gcode

M104 S0 ; turn off hotend heater
M140 S0 ; turn off bed heater
G91 ; Switch to use Relative Coordinates
G1 E-3 F700 ; retract the filament a bit before lifting the nozzle to release some of the pressure
G1 Z2 F1000 ; raise platform 2mm from current position
G1 E-2 F700 ; retract filament even more
G90 ; Switch back to using absolute coordinates
G28 X ; Return to home position. Without an X Y or Z after G28 the print completion time will not be displayed on the Mini Delta's display.
M84 ; disable motors
G4 S300 ; pause for 300 seconds to keep fan running to cool hotend and allow the fan to be turned off
M106 S0 ; fan off

machine_start.gcode

G90 ; switch to absolute positioning - this line was added in case Cura doesn't include it by default
M82 ; set extruder to absolute mode - this line was added in case Cura doesn't include it by default
G28 ; start from home position
G29 P3 Z0.30 ; probe the bed at 3 points with a 0.3mm overall vertical offset
G1 Z15.0 F4800  ; move the nozzle up 15mm
G92 E0 ; reset extrusion distance
G1 F200 E3 ; extrude 3mm of feed stock
G92 E0 ; reset extrusion distance again
G1 F4800

material.txt

AmazonBasics PLA
Density 1.24 g/cm3
Diameter 1.75mm
Filament Cost $19.99
Filament weight 1000g

Default Printing Temperature 200C
Default Build Plate Temperature 50C
Retraction Distance 6.50mm
Retraction Speed 25mm/s
Standby Temperature 175C
Fan Speed 100%

settings.txt

Cura 3.5.1

Printer Settings
X 110mm
Y 110mm
Z 120mm

Build plate shape: Elliptic
Origin at Center: Yes
Heated bed: Yes

Printhead Settings
X min 20mm
Y min 10mm
X max 10mm
Y max 10mm
Gantry height 99999999999mm
Number of Extruders: 1

Extruder 1
Nozzle size 0.4mm
Compatible material diameter 1.75mm
Nozzle offset X
Nozzle offset Y