📺 OpenCV C++ Mac M1 Installation Tutorial Video
We need homebrew installed in our system
brew install cmake
mkdir Open_CV && cd Open_CV
git clone https://github.com/opencv/opencv.git
mkdir build && cd build
cmake ../opencv/ .
arch -arm64 cmake ../opencv/ -DWITH_QT=OFF -DWITH_OPENGL=OFF -DFORCE_VTK=OFF -DWITH_TBB=OFF -DWITH_GDAL=OFF -DWITH_XINE=OFF -DBUILD_EXAMPLES=OFF -DBUILD_ZLIB=OFF -DBUILD_TESTS=OFF .
arch -arm64 sudo make -j 4
arch -arm64 sudo make install
When I run 'arch -arm64 cmake ....' I get the error:
arch: posix_spawnp: cmake: Bad CPU type in executable
How do I install a version of make that has the arm64 architecture?
file which cmake show:
/usr/local/bin/cmake: Mach-O 64-bit executable x86_64
Where as file which make shows:
/usr/bin/make (for architecture x86_64): Mach-O 64-bit executable x86_64
/usr/bin/make (for architecture arm64e): Mach-O 64-bit executable arm64e
@east10 I'm getting the same problem. It appears to detect x86_64 in the terminal regardless..
I was dealing with this issue last night and I found that I only had cmake installed for x86_64, though which cmake did not specify that. Instead, it was that my Homebrew version was installed on the x86_64 path rather than the arm64 path.
One of Homebrew's pages specifies that Intel files are installed under /usr/local, while Apple Silicon files are installed under /opt/homebrew, and is chosen automatically on install.
Since I had previously checked the box "Run with rosetta" in my terminal settings, I believe Homebrew installed as if it were an Intel machine rather than an Apple Silicon machine. I reran the Homebrew install with the box unchecked, added Homebrew to my path, and reinstalled cmake, which then allowed me to run the arch command without the above error.
how do we include files. for xcode if this way of installation is followed?
How about adding the below flag which enables you to use pkg-config .
-DOPENCV_GENERATE_PKGCONFIG=ON
pkg-config --cflags --libs opencv4
excuse me, but when I use the second line, he return me this : "zsh: command not found: pkg-config"
You can simply run. brew install pkg-config
Hello, thank you for this. I tried to run an OpenCV example code but I get this:
opencv_test.cpp:2:10: fatal error: 'opencv2/imgproc.hpp' file not found #include "opencv2/imgproc.hpp"
How can I do to include the different header files in the compilation?
Thank you.
Hi @henrydrp10
Can you share the system and hardware that you are using?
Hi @nucliweb
Sorry for bothering. I went into the video tutorial and I managed to understand how compilation is done (using CMakeLists and makefiles). I had just compiled using the g++ command and therefore the libraries had not been included properly.
Thank you.
Great! 🚀
Great! thank you!
I think you meant:
mkdir build && cd build