Last active
December 30, 2015 06:09
-
-
Save nullnilaki/7787215 to your computer and use it in GitHub Desktop.
OpenBSD/sgi Fuel log
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Sgi Fuel | |
IP35 PROM SGI Version 6.210 built 02:33:51 PM Aug 26, 2004 | |
Running in DDR mode | |
Testing/Initializing memory ............... DONE | |
Copying PROM code to memory ............... DONE | |
Discovering local IO ...................... DONE | |
Discovering NUMAlink connectivity ......... | |
Local hub NUMAlink is down. | |
*** Local network link down | |
DONE | |
Found 1 objects (1 hubs, 0 routers) in 30360 usec | |
Waiting for peers to complete discovery.... DONE | |
No other nodes present; becoming global master | |
Global master is /hw/rack/001/bay/01 | |
Intializing any CPUless nodes.............. DONE | |
Checking partitioning information ......... DONE | |
No other nodes present; becoming partition master | |
Loading BASEIO prom ....................... DONE | |
BASEIO PROM Monitor SGI Version 6.210 built 02:30:38 PM Aug 26, 2004 (BE64) | |
1 CPUs on 1 nodes found. | |
Automatic update of PROM environment disabled | |
PS/2 Keyboard & Mouse diagnostics | |
No keyboard found, skipping keyboard test | |
No mouse found, skipping mouse test | |
Missing PS/2 device(s) AND console set to "g" | |
PS/2 Keyboard & Mouse diagnostics passed with a possible problem | |
Graphics diagnostics | |
Odyssey board #0 found on nasid 0 | |
Running Odyssey xtalk sanity diag... | |
Board version 1 - Buzz revision 3B | |
On board sdram size: 32 Mb | |
Cas latency: CAS 3 | |
4 banks by sdram module | |
Running Odyssey Buzz registers diag... | |
Device passed diagnostics | |
Installing PROM Device drivers ............ | |
Base I/O Ethernet set to /dev/ethernet/ef0 | |
Installing Graphics Console... | |
graphics install: searching for pipe 0 | |
Walking SCSI Adapter 0, (pci id 1) | |
1+ Device Vendor Product: FUJITSU MAU3073NP | |
2+ Device Vendor Product: FUJITSU MAU3073NP | |
3+ Device Vendor Product: FUJITSU MAU3073NP | |
4- 5+ Device Vendor Product: FUJITSU MAU3073NP | |
6+ Device Vendor Product: FUJITSU MAU3073NP | |
7+ Device Vendor Product: FUJITSU MAU3073NP | |
8+ Device Vendor Product: FUJITSU MAU3073NP | |
9+ Device Vendor Product: FUJITSU MAU3073NP | |
10+ Device Vendor Product: FUJITSU MAU3073NP | |
11+ Device Vendor Product: FUJITSU MAU3073NP | |
12+ Device Vendor Product: FUJITSU MAU3073NP | |
13+ Device Vendor Product: FUJITSU MAU3073NP | |
14+ Device Vendor Product: FUJITSU MAU3073NP | |
15+ Device Vendor Product: FUJITSU MAU3073NP | |
= 14 device(s) | |
Walking SCSI Adapter 1, (pci id 1) | |
1- 2- 3- 4- 5- 6+ Device Vendor Product: TOSHIBA DVD-ROM SD-M1711 | |
7- 8- 9- 10- 11- 12- 13- 14- 15- = 1 device(s) | |
Initializing PROM Device drivers .......... DONE | |
Cannot connect to keyboard -- check the cable. | |
Cannot open /dev/input/ioc3pckm0 for input | |
Cannot connect to keyboard -- check the cable. | |
Cannot open /dev/input/ioc3pckm0 for input | |
Checking hardware inventory ............... Found new or re-enabled component PCI DEV 3 | |
Found new or re-enabled component PCI DEV 3 | |
Found new or re-enabled component PCI DEV 3 | |
DONE | |
**** System Configuration and Diagnostics Summary **** | |
CONFIG: | |
No. of NODEs enabled = 1 | |
No. of NODEs disabled = 0 | |
No. of CPUs enabled = 1 | |
No. of CPUs disabled = 0 | |
Mem enabled = 4096 MB | |
Mem disabled = 0 MB | |
No. of RTRs enabled = 0 | |
No. of RTRs disabled = 0 | |
DIAG RESULTS: | |
ALL DIAGS PASSED. | |
**** End System Configuration and Diagnostics Summary **** | |
System Maintenance Menu | |
1) Start System | |
2) Install System Software | |
3) Run Diagnostics | |
4) Recover System | |
5) Enter Command Monitor | |
Option? 5 | |
Command Monitor. Type "exit" to return to the menu. | |
>> hinv | |
System SGI-IP35 | |
1 900 MHz IP35 Processors | |
Main memory size: 4096 Mbytes | |
Graphics Controller | |
Integral Fast Ethernet | |
IOC3 serial port | |
USB (OHCI interface) | |
Integral SCSI controller 0: Version Qlogic 12160 | |
Disk drive: unit 1 on SCSI Controller 0, (dksc(0,1,0)) | |
Disk drive: unit 2 on SCSI Controller 0, (dksc(0,2,0)) | |
Disk drive: unit 3 on SCSI Controller 0, (dksc(0,3,0)) | |
Disk drive: unit 5 on SCSI Controller 0, (dksc(0,5,0)) | |
Disk drive: unit 6 on SCSI Controller 0, (dksc(0,6,0)) | |
Disk drive: unit 7 on SCSI Controller 0, (dksc(0,7,0)) | |
Disk drive: unit 8 on SCSI Controller 0, (dksc(0,8,0)) | |
Disk drive: unit 9 on SCSI Controller 0, (dksc(0,9,0)) | |
Disk drive: unit 10 on SCSI Controller 0, (dksc(0,10,0)) | |
Disk drive: unit 11 on SCSI Controller 0, (dksc(0,11,0)) | |
Disk drive: unit 12 on SCSI Controller 0, (dksc(0,12,0)) | |
Disk drive: unit 13 on SCSI Controller 0, (dksc(0,13,0)) | |
Disk drive: unit 14 on SCSI Controller 0, (dksc(0,14,0)) | |
Disk drive: unit 15 on SCSI Controller 0, (dksc(0,15,0)) | |
Integral SCSI controller 1: Version Qlogic 12160 | |
CDROM: unit 6 on SCSI Controller 1, (cdrom(1,6,7)) | |
>> hinv -v | |
IP35 Node Board, Module 001c01 | |
ASIC BEDROCK Rev 2, 200 MHz, (nasid 0) | |
Processor A: 900 MHz R16000 Rev 3.0 | |
Secondary Cache 8MB 450MHz Tap 0xb , (cpu 0) | |
R16010FPC Rev 3.0 | |
Memory on board, 4096 MBytes (Standard) | |
Bank 0, 1024 MBytes (Premium) <-- (Software Bank 0) | |
Bank 1, 1024 MBytes (Premium) | |
Bank 2, 1024 MBytes (Premium) | |
Bank 3, 1024 MBytes (Premium) | |
IBRICK Bridge, Module 001c01 | |
ASIC BRIDGE Rev 2, (widget 14) | |
IBRICK Bridge, Module 001c01 | |
ASIC BRIDGE Rev 2, (widget 15) | |
adapter PCI (SCSI interface) Rev 6 | |
(pci id 1) | |
peripheral DISK, BUS 0, ID 1, FUJITSU MAU3073NP | |
peripheral DISK, BUS 0, ID 2, FUJITSU MAU3073NP | |
peripheral DISK, BUS 0, ID 3, FUJITSU MAU3073NP | |
peripheral DISK, BUS 0, ID 5, FUJITSU MAU3073NP | |
peripheral DISK, BUS 0, ID 6, FUJITSU MAU3073NP | |
peripheral DISK, BUS 0, ID 7, FUJITSU MAU3073NP | |
peripheral DISK, BUS 0, ID 8, FUJITSU MAU3073NP | |
peripheral DISK, BUS 0, ID 9, FUJITSU MAU3073NP | |
peripheral DISK, BUS 0, ID 10, FUJITSU MAU3073NP | |
peripheral DISK, BUS 0, ID 11, FUJITSU MAU3073NP | |
peripheral DISK, BUS 0, ID 12, FUJITSU MAU3073NP | |
peripheral DISK, BUS 0, ID 13, FUJITSU MAU3073NP | |
peripheral DISK, BUS 0, ID 14, FUJITSU MAU3073NP | |
peripheral DISK, BUS 0, ID 15, FUJITSU MAU3073NP | |
peripheral CDROM, BUS 1, ID 6, TOSHIBA DVD-ROM SD-M1711 | |
adapter ID (Vendor 1412 Device 1724 class 4 subclass 4) | |
(pci id 3) | |
adapter IOC3 Rev 1 | |
(pci id 4) | |
controller multi function SuperIO | |
controller Ethernet Rev 1 | |
adapter USB (OHCI interface) | |
(pci id 5) | |
ASIC XBOW Rev 2, on CBrick, Module 001c01 | |
ODYSSEY Graphics Board, Module 001c01 | |
>> exit | |
System Maintenance Menu | |
1) Start System | |
2) Install System Software | |
3) Run Diagnostics | |
4) Recover System | |
5) Enter Command Monitor | |
Option? 2 | |
Installing System Software... | |
Press <Esc> to return to the menu. | |
1) Remote Directory 2)[Local CD-ROM] | |
*a) Local SCSI CD-ROM drive 6, on controller 1 | |
Enter 1-2 to select source type, a to select the source, <esc> to quit, | |
or <enter> to start: | |
Insert the installation CD-ROM, then press <enter>: | |
OpenBSD/sgi-IP27 ARCBios boot version 1.4 | |
arg 0: scsi(1)cdrom(6)partition(8)sash64 | |
arg 1: OSLoadOptions=mini | |
arg 2: ConsoleIn=/dev/tty/ioc30 | |
arg 3: ConsoleOut=/dev/tty/ioc30 | |
arg 4: SystemPartition=dksc(0,1,8) | |
arg 5: OSLoader=sash | |
arg 6: OSLoadPartition=dksc(0,1,0) | |
arg 7: OSLoadFilename=unix | |
Boot: scsi(1)cdrom(6)partition(0)/bsd.rd.IP27 | |
9173168+677136 [58+216624+130463]=0x9b9c50 | |
ARCS64 Firmware | |
Found SGI-IP35, setting up. | |
Machine is in M mode. | |
Initial setup done, switching console. | |
[ using 347792 bytes of bsd ELF symbol table ] | |
Copyright (c) 1982, 1986, 1989, 1991, 1993 | |
The Regents of the University of California. All rights reserved. | |
Copyright (c) 1995-2013 OpenBSD. All rights reserved. http://www.OpenBSD.org | |
OpenBSD 5.4-current (RAMDISK-IP27) #42: Mon Nov 4 00:14:32 GMT 2013 | |
root@saliouse.gentiane.org:/sys/arch/sgi/compile/RAMDISK-IP27 | |
real mem = 4294967296 (4096MB) | |
rsvd mem = 20643840 (20MB) | |
avail mem = 4207165440 (4012MB) | |
mainbus0 at root: Fuel | |
cpu0 at mainbus0 nasid 0: R16000 CPU rev 3.0 900 MHz, R16000 FPU rev 3.0 | |
cpu0: cache L1-I 32KB D 32KB 2 way, L2 8192KB 2 way | |
clock0 at mainbus0 nasid 0: int 5 | |
xbow0 at mainbus0 nasid 0: XXBow revision 2 | |
xbridge0 at xbow0 widget 15: XBridge revision 2 | |
xbpci0 at xbridge0 bus 0: 33 MHz PCI bus | |
pci0 at xbpci0 bus 0 | |
isp0 at pci0 dev 1 function 0 "QLogic ISP12160" rev 0x06: irq 1, xbow irq 62 | |
isp0: board type 12160 rev 0x6, loaded firmware rev 10.4.41 | |
scsibus0 at isp0: 16 targets, initiator 0 | |
sd0 at scsibus0 targ 1 lun 0: <FUJITSU, MAU3073NP, HPF4> SCSI3 0/direct fixed eui.00000e1100af3fcd | |
sd0: 70007MB, 512 bytes/sector, 143374738 sectors | |
sd1 at scsibus0 targ 2 lun 0: <FUJITSU, MAU3073NP, HPF4> SCSI3 0/direct fixed eui.00000e1100af3fcd | |
sd1: 70007MB, 512 bytes/sector, 143374738 sectors | |
sd2 at scsibus0 targ 3 lun 0: <FUJITSU, MAU3073NP, HPF4> SCSI3 0/direct fixed eui.00000e1100af3fcd | |
sd2: 70007MB, 512 bytes/sector, 143374738 sectors | |
isp0: command overrun for command on 0.4.0 | |
isp0: data overrun for command on 0.4.0 | |
sd3 at scsibus0 targ 5 lun 0: <FUJITSU, MAU3073NP, HPF4> SCSI3 0/direct fixed eui.00000e1100af3fcd | |
sd3: 70007MB, 512 bytes/sector, 143374738 sectors | |
sd4 at scsibus0 targ 6 lun 0: <FUJITSU, MAU3073NP, HPF4> SCSI3 0/direct fixed eui.00000e1100af3fcd | |
sd4: 70007MB, 512 bytes/sector, 143374738 sectors | |
sd5 at scsibus0 targ 7 lun 0: <FUJITSU, MAU3073NP, HPF4> SCSI3 0/direct fixed eui.00000e1100af3fcd | |
sd5: 70007MB, 512 bytes/sector, 143374738 sectors | |
sd6 at scsibus0 targ 8 lun 0: <FUJITSU, MAU3073NP, HPF4> SCSI3 0/direct fixed eui.00000e1100af3fcd | |
sd6: 70007MB, 512 bytes/sector, 143374738 sectors | |
sd7 at scsibus0 targ 9 lun 0: <FUJITSU, MAU3073NP, HPF4> SCSI3 0/direct fixed eui.00000e1100af3fcd | |
sd7: 70007MB, 512 bytes/sector, 143374738 sectors | |
sd8 at scsibus0 targ 10 lun 0: <FUJITSU, MAU3073NP, HPF4> SCSI3 0/direct fixed eui.00000e1100af3fcd | |
sd8: 70007MB, 512 bytes/sector, 143374738 sectors | |
sd9 at scsibus0 targ 11 lun 0: <FUJITSU, MAU3073NP, HPF4> SCSI3 0/direct fixed eui.00000e1100af3fcd | |
sd9: 70007MB, 512 bytes/sector, 143374738 sectors | |
sd10 at scsibus0 targ 12 lun 0: <FUJITSU, MAU3073NP, HPF4> SCSI3 0/direct fixed eui.00000e1100af3fcd | |
sd10: 70007MB, 512 bytes/sector, 143374738 sectors | |
sd11 at scsibus0 targ 13 lun 0: <FUJITSU, MAU3073NP, HPF4> SCSI3 0/direct fixed eui.00000e1100af3fcd | |
sd11: 70007MB, 512 bytes/sector, 143374738 sectors | |
sd12 at scsibus0 targ 14 lun 0: <FUJITSU, MAU3073NP, HPF4> SCSI3 0/direct fixed eui.00000e1100af3fcd | |
sd12: 70007MB, 512 bytes/sector, 143374738 sectors | |
sd13 at scsibus0 targ 15 lun 0: <FUJITSU, MAU3073NP, HPF4> SCSI3 0/direct fixed eui.00000e1100af3fcd | |
sd13: 70007MB, 512 bytes/sector, 143374738 sectors | |
scsibus1 at isp0: 16 targets, initiator 0 | |
cd0 at scsibus1 targ 6 lun 0: <TOSHIBA, DVD-ROM SD-M1711, 1005> SCSI2 5/cdrom removable | |
"IC Ensemble Envy24PT/HT Audio" rev 0x01 at pci0 dev 3 function 0 not configured | |
ioc0 at pci0 dev 4 function 0 "SGI IOC3" rev 0x01 | |
onewire0 at ioc0 | |
ioc0: ethernet irq 4, xbow irq 61 | |
ioc0: superio irq 0, xbow irq 60 | |
com0 at ioc0 base 0x20178: ns16550a, 16 byte fifo | |
com0: console | |
com1 at ioc0 base 0x20170: ns16550a, 16 byte fifo | |
iockbc0 at ioc0 | |
iec0 at ioc0: 128KB SSRAM, address 08:00:69:10:82:94 | |
nsphyter0 at iec0 phy 1: DP83843 10/100 PHY, rev. 0 | |
lpt at ioc0 not configured | |
dsrtc0 at ioc0: DS1742W | |
ohci0 at pci0 dev 5 function 0 "Opti 82C861" rev 0x10: irq 5, xbow irq 59, version 1.0, legacy support | |
usb0 at ohci0: USB revision 1.0 | |
uhub0 at usb0 "Opti OHCI root hub" rev 1.00/1.00 addr 1 | |
xbridge1 at xbow0 widget 14: XBridge revision 2 | |
xbpci1 at xbridge1 bus 0: 66 MHz PCI bus | |
pci1 at xbpci1 bus 0 | |
odyssey0 at xbow0 widget 13: Odyssey device has not been setup by firmware! | |
boot device: sd0 | |
disklabels not read: sd5 sd6 sd7 sd8 sd9 sd10 sd11 sd12 sd13 rd0 | |
root on rd0a swap on rd0b dump on rd0b | |
erase ^?, werase ^W, kill ^U, intr ^C, status ^T |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment