Created
December 5, 2013 18:52
-
-
Save nullnilaki/7811060 to your computer and use it in GitHub Desktop.
OpenBSD/sgi Onyx350 log
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
001c14-L1>power up | |
001c14 ATTN: Cooling system stabilized | |
returning to console mode 001c14 CPU0, <CTRL_T> to escape to L1 | |
Starting PROM Boot process | |
IP35 PROM SGI Version 6.201 built 08:59:10 AM Jun 2, 2004 | |
Testing/Initializing memory ............... DONE | |
Copying PROM code to memory ............... DONE | |
Discovering local IO ...................... DONE | |
Discovering NUMAlink connectivity ......... DONE | |
Found 2 objects (2 hubs, 0 routers) in 7128 usec | |
Waiting for peers to complete discovery.... DONE | |
Global master is /hw/rack/001/bay/14 | |
DONE | |
Global master is /hw/rack/001/bay/14 | |
Intializing any CPUless nodes.............. DONE | |
Checking partitioning information ......... DONE | |
Checking partitioning information ......... DONE | |
INFO: console subchannel changed: 001c16 CPU2 | |
Local slave entering slave loop | |
INFO: console subchannel changed: 001c16 CPU0 | |
Local master entering slave loop | |
Local slave entering slave loop | |
Local slave entering slave loop | |
Local slave entering slave loop | |
Loading BASEIO prom ....................... DONE | |
BASEIO PROM Monitor SGI Version 6.201 built 08:56:46 AM Jun 2, 2004 (BE64) | |
6 CPUs on 2 nodes found. | |
Automatic update of PROM environment disabled | |
Graphics diagnostics | |
Odyssey board #0 found on nasid 0 | |
Running Odyssey xtalk sanity diag... | |
Board version 1 - Buzz revision 3B | |
On board sdram size: 128 Mb | |
Cas latency: CAS 3 | |
4 banks by sdram module | |
Running Odyssey Buzz registers diag... | |
Device passed diagnostics | |
Odyssey board #1 found on nasid 1 | |
Running Odyssey xtalk sanity diag... | |
Board version 1 - Buzz revision 3B | |
On board sdram size: 128 Mb | |
Cas latency: CAS 3 | |
4 banks by sdram module | |
Running Odyssey Buzz registers diag... | |
Device passed diagnostics | |
***WARNING: Master I-brick was /hw/module/001c01/iobrick but is now /hw/module/001c14/iobrick | |
Check for LINK errors or setenv ConsolePath to new value. | |
Installing PROM Device drivers ............ | |
On-board (IO9) tigon3 1000BaseT interface | |
Base I/O Ethernet set to /dev/ethernet/tg0 | |
Installing Graphics Console... | |
graphics install: searching for pipe 0 | |
Probing IOC4 ATA adapter 2 | |
IOC4 RevId = 79 | |
Detected Vendor id/Product MATSHITA DVD-ROM SR-8177 | |
Walking SCSI Adapter 0, (pci id 3) | |
1+ Device Vendor Product: SGI ST373307LC | |
2+ Device Vendor Product: SGI ST373307LC | |
3- 4- 5- 6- 7- 8- 9- 10- 11- 12- 13- 14- 15- = 2 device(s) | |
Walking SCSI Adapter 1, (pci id 3) | |
1- 2- 3- 4- 5- 6- 7- 8- 9- 10- 11- 12- 13- 14- 15- = 0 device(s) | |
Initializing PROM Device drivers .......... | |
Initializing Base I/O Ethernet Interface...Failed. MII Status Register = 0x7949 | |
Done. | |
---------------Interface Configuration Summary---------------- | |
ASIC|Revision|MAC Address : 5701|B5|08:00:69:13:fb:9a | |
Link Negotiation|Advertisement : On|<H10 F10 H100 F100 F1000> | |
Link|Speed|Duplex|Rx/Tx FlowCtrl: Down|10|Half|Off/Off | |
-------------------------------------------------------------- | |
DONE | |
Cannot connect to keyboard -- check the cable. | |
Cannot open /dev/input/ioc4pckm0 for input | |
Cannot connect to keyboard -- check the cable. | |
Cannot open /dev/input/ioc4pckm0 for input | |
Checking hardware inventory ............... DONE | |
**** System Configuration and Diagnostics Summary **** | |
CONFIG: | |
No. of NODEs enabled = 2 | |
No. of NODEs disabled = 0 | |
No. of CPUs enabled = 6 | |
No. of CPUs disabled = 0 | |
Mem enabled = 12288 MB | |
Mem disabled = 0 MB | |
No. of RTRs enabled = 0 | |
No. of RTRs disabled = 0 | |
DIAG RESULTS: | |
ALL DIAGS PASSED. | |
**** End System Configuration and Diagnostics Summary **** | |
System Maintenance Menu | |
1) Start System | |
2) Install System Software | |
3) Run Diagnostics | |
4) Recover System | |
5) Enter Command Monitor | |
Option? | |
>> hinv | |
System SGI-IP35 | |
6 700 MHz IP35 Processors | |
Main memory size: 12288 Mbytes | |
Graphics Controller | |
PCI IOC4: in slot 1, (adapter 0) | |
Graphics Controller | |
USB (OHCI interface) | |
USB (OHCI interface) | |
PCI Gigabit Ethernet (tigon3) Controller 1 | |
Integral SCSI controller 2: Version IOC4 ATA | |
CDROM: unit 0 on SCSI Controller 2, (cdrom(2,0,7)) | |
Integral SCSI controller 0: Version Qlogic 12160 | |
Disk drive: unit 1 on SCSI Controller 0, (dksc(0,1,0)) | |
Disk drive: unit 2 on SCSI Controller 0, (dksc(0,2,0)) | |
Integral SCSI controller 1: Version Qlogic 12160 | |
>> hinv -v | |
IP35 Node Board, Module 001c14 | |
ASIC BEDROCK Rev 2, 200 MHz, (nasid 0) | |
Processor A: 700 MHz R16000 Rev 2.1 | |
Secondary Cache 4MB 350MHz Tap 0xc , (cpu 0) | |
R16010FPC Rev 2.1 | |
Processor B: 700 MHz R16000 Rev 2.1 | |
Secondary Cache 4MB 350MHz Tap 0xc , (cpu 1) | |
R16010FPC Rev 2.1 | |
Processor C: 700 MHz R16000 Rev 2.1 | |
Secondary Cache 4MB 350MHz Tap 0xc , (cpu 2) | |
R16010FPC Rev 2.1 | |
Processor D: 700 MHz R16000 Rev 2.1 | |
Secondary Cache 4MB 350MHz Tap 0xc , (cpu 3) | |
R16010FPC Rev 2.1 | |
Memory on board, 8192 MBytes (Standard) | |
Bank 0, 1024 MBytes (Premium) <-- (Software Bank 0) | |
Bank 1, 1024 MBytes (Premium) | |
Bank 2, 1024 MBytes (Premium) | |
Bank 3, 1024 MBytes (Premium) | |
Bank 4, 1024 MBytes (Premium) | |
Bank 5, 1024 MBytes (Premium) | |
Bank 6, 1024 MBytes (Premium) | |
Bank 7, 1024 MBytes (Premium) | |
IP35 Node Board, Module 001c16 | |
ASIC BEDROCK Rev 2, 200 MHz, (nasid 1) | |
Processor A: 700 MHz R16000 Rev 2.1 | |
Secondary Cache 4MB 350MHz Tap 0xc , (cpu 4) | |
R16010FPC Rev 2.1 | |
Processor C: 700 MHz R16000 Rev 2.1 | |
Secondary Cache 4MB 350MHz Tap 0xc , (cpu 5) | |
R16010FPC Rev 2.1 | |
Memory on board, 4096 MBytes (Standard) | |
Bank 0, 1024 MBytes (Premium) <-- (Software Bank 0) | |
Bank 1, 1024 MBytes (Premium) | |
Bank 2, 1024 MBytes (Premium) | |
Bank 3, 1024 MBytes (Premium) | |
IXBRICK Bridge, Module 001c14 | |
ASIC BRIDGE Rev 3, (widget 15) | |
adapter IOC4 Rev 4f | |
(pci id 1) | |
adapter IOC4-ATA Rev 4f | |
(pci id 1) | |
peripheral CDROM, BUS 0, ID 0, MATSHITA DVD-ROM SR-8177 | |
adapter PCI (SCSI interface) Rev 6 | |
(pci id 3) | |
peripheral DISK, BUS 0, ID 1, SGI ST373307LC | |
peripheral DISK, BUS 0, ID 2, SGI ST373307LC | |
adapter GigE Rev 15 | |
(pci id 4) | |
IXBRICK Bridge, Module 001c14 | |
ASIC BRIDGE Rev 3, (widget 15) | |
adapter ID (Vendor 14e4 Device 1648 class 2 subclass 2) | |
(pci id 1 function 0) | |
adapter ID (Vendor 14e4 Device 1648 class 2 subclass 2) | |
(pci id 1 function 1) | |
adapter ID (Vendor 14e4 Device 1648 class 2 subclass 2) | |
(pci id 2 function 0) | |
adapter ID (Vendor 14e4 Device 1648 class 2 subclass 2) | |
(pci id 2 function 1) | |
IXBRICK Bridge, Module 001c16 | |
ASIC BRIDGE Rev 3, (widget 15) | |
adapter ID (Vendor 1077 Device 2312 class c subclass c) | |
(pci id 1 function 0) | |
adapter ID (Vendor 1077 Device 2312 class c subclass c) | |
(pci id 1 function 1) | |
IXBRICK Bridge, Module 001c16 | |
ASIC BRIDGE Rev 3, (widget 15) | |
adapter USB (OHCI interface) | |
(pci id 2 function 0) | |
adapter USB (OHCI interface) | |
(pci id 2 function 1) | |
ASIC XBOW Rev 3, on CBrick, Module 001c14 | |
ASIC XBOW Rev 3, on CBrick, Module 001c16 | |
ODYSSEY Graphics Board, Module 001c14 | |
ODYSSEY Graphics Board, Module 001c16 | |
>> hinv -mvvv | |
location: /hw/rack/001/bay/14 | |
Part:030-1868-001;Name:IP53_4CPU;Serial:NGA704;Revision:-C;Group:ff;Capability:ffffffff;Variety:ff;Laser:0000000054860df4; | |
location: /hw/rack/001/bay/14 | |
Part:030-1909-007;Name:ODY128B1_2;Serial:NCN884;Revision:-C;Group:ff;Capability:ffffffff;Variety:ff;Laser:000000005428d164; | |
location: /hw/rack/001/bay/14 | |
Part:030-1809-005;Name:2U_INT_53;Serial:NGL825;Revision:-A;Group:ff;Capability:ffffffff;Variety:ff;Laser:00000000548de80d; | |
location: /hw/rack/001/bay/14 | |
Part:030-1809-005;Name:2U_INT_53;Serial:NGL825;Revision:-A;Group:ff;Capability:ffffffff;Variety:ff;Laser:00000000548de80d; | |
location: /hw/rack/001/bay/16 | |
Part:030-1869-001;Name:IP53_2CPU;Serial:NGB292;Revision:-D;Group:ff;Capability:ffffffff;Variety:ff;Laser:000000005486ac26; | |
location: /hw/rack/001/bay/16 | |
Part:030-1909-007;Name:ODY128B1_2;Serial:MZD394;Revision:-C;Group:ff;Capability:ffffffff;Variety:ff;Laser:0000000052d46cb8; | |
location: /hw/rack/001/bay/16 | |
Part:030-1809-004;Name:2U_INT_53;Serial:NGH593;Revision:-A;Group:ff;Capability:ffffffff;Variety:ff;Laser:00000000548b00d7; | |
location: /hw/rack/001/bay/16 | |
Part:030-1809-004;Name:2U_INT_53;Serial:NGH593;Revision:-A;Group:ff;Capability:ffffffff;Variety:ff;Laser:00000000548b00d7; |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment