Skip to content

Instantly share code, notes, and snippets.

@nvsofts
Created March 19, 2020 03:31
Show Gist options
  • Save nvsofts/1110da2fe97c97b0dcfd1cc87f86e9dc to your computer and use it in GitHub Desktop.
Save nvsofts/1110da2fe97c97b0dcfd1cc87f86e9dc to your computer and use it in GitHub Desktop.
PCE mini U-Boot log
key_press
0x00000073
HELLO! BOOT0 is starting!
boot0 version : 4.2.0
boot0 commit : 481c1423f323257356c9db28e780864137596a70
fel_flag = 0x00000000
rtc[0] value = 0x00000000
rtc[1] value = 0x00000000
rtc[2] value = 0x00000000
rtc[3] value = 0x00000000
DRAM DRIVE INFO: V1.7
DRAM Type =3 (2:DDR2,3:DDR3,6:LPDDR2,7:LPDDR3)
DRAM zq value: 00003bbbDRAM CLK =600 MHZ
ID CHECK VERSION: V0.1
using ic R16
USE PLL DDR1
USE PLL NORMAL
PLL FREQUENCE = 1200 MHZ
DRAM PLL DDR1 frequency extend open !
DRAM master priority setting ok.
Auto calculate timing parameter!
para_dram_tpr0 = 0047a14f
para_dram_tpr1 = 01c2294c
para_dram_tpr2 = 00069049
tcl = 6,tcwl = 4
DRAM TIMING PARA0 = 0b0f180c
DRAM TIMING PARA1 = 0003040f
DRAM TIMING PARA2 = 0406050a
DRAM TIMING PARA3 = 0000400c
DRAM TIMING PARA4 = 05020405
DRAM TIMING PARA5 = 05050403
DRAM TIMING PARA8 = 90003310
DRAM PHY INTERFACE PARA = 02040102
DRAM VTC is disable
DRAM dynamic DQS/DQ ODT is on
DRAM DQS gate is PD mode.
DRAM one rank training is on,the value is 91003587
DRAM work mode register value = 004318d4
DRAM SIZE =256 M
set one rank ODTMAP
DRAM simple test OK.
dram size =256
========= sw2001_verify ============
rsb_send_initseq: rsb clk 400Khz -> 3Mhz
tableNum = 4
plaint = 00000070 00000078 000000c7 0000007f 00000049 00000031 00000015 000000e2 000000b0 00000047 000000cd 0000004f 00000063 0000006c 00000051 00000058
result = 00000070 00000078 000000c7 0000007f 00000049 00000031 00000015 000000e2 000000b0 00000047 000000cd 0000004f 00000063 0000006c 00000051 00000058
sw2001_verify success!
====================================
card boot number = 2
card no is 2
sdcard 2 line count 8
[mmc]: mmc driver ver 2015-04-13 15:56:39
[mmc]: ***Try SD card 2***
[mmc]: mmc 2 cmd 8 err 00000100
[mmc]: mmc 2 cmd 8 err 00000100
[mmc]: mmc 2 send if cond failed
[mmc]: mmc 2 cmd 55 err 00000100
[mmc]: mmc 2 cmd 55 err 00000100
[mmc]: mmc 2 send app cmd failed
[mmc]: ***Try MMC card 2***
[mmc]: mmc re-update_phase
[mmc]: mmc re-update_phase
[mmc]: 8bit ddr!!!
[mmc]: mmc re-update_phase
[mmc]: MMC ver 4.0
[mmc]: SD/MMC Card: 8bit, capacity: 3728MB
[mmc]: vendor: Man 00150100 Snr 01035c5a
[mmc]: product: 4FTE4
[mmc]: revision: 5.2
[mmc]: ***SD/MMC 2 init OK!!!***
sdcard 2 init ok
The size of uboot is 000dc000.
sum=74d05657
src_sum=74d05657
set_mmc_para,sdly 50M 0
set_mmc_para,sdly 25M 0
Succeed in loading uboot from sdmmc flash.
Ready to disable icache.
Jump to secend Boot.
[ 0.375]
U-Boot 2011.09-rc1-00000-g481c142-dirty (Sep 26 2019 - 00:36:30) Allwinner Technology
[ 0.384]version: 1.1.0
[ 0.387]uboot commit : 481c1423f323257356c9db28e780864137596a70
ready
normal dc exist, limit to dc
dram_para_set start
dram_para_set end
[ 0.484]DRAM: 256 MiB
relocation Offset is: 07af1000
board.c 622
smcl's set manager is NULL
lcd_panel_fun[0].cfg_panel_info is NULL
lcd_panel_fun[0].cfg_open_flow is NULL
workmode = 0
MMC: 2
[ 0.593][mmc]: mmc driver ver 2016-03-24 19:30:15
[ 0.598][mmc]: get sdc_phy_wipe fail.
[ 0.602][mmc]: get sdc0 sdc_erase fail.
[ 0.606][mmc]: get sdc_2xmode ok, val = 1
[ 0.610][mmc]: get sdc_ddrmode ok, val = 1
[ 0.614][mmc]: get sdc_f_max fail,use default 50000000Hz
[ 0.620][mmc]: get card_line ok, card_line = 8
[ 0.624][mmc]: get sdc_ex_dly_used fail,use default
[ 0.629][mmc]: SUNXI SD/MMC: 2
[ 0.634][mmc]: mmc_config_clock: clk 400000
[ 0.649][mmc]: *Try SD card 2*
[ 0.654][mmc]: mmc 2 cmd 8 err 100
[ 0.660][mmc]: mmc send if cond failed
[ 0.665][mmc]: mmc 2 cmd 55 err 100
[ 0.671][mmc]: send app cmd failed
[ 0.674][mmc]: *Try MMC card 2*
[ 0.722][mmc]: mmc_config_clock: clk 25000000
[ 0.736][mmc]: mmc re-update_phase
[ 0.743][mmc]: mmc re-update_phase
[ 0.750][mmc]: mmc re-update_phase
[ 0.755][mmc]: ddr8
[ 0.759][mmc]: mmc re-update_phase
[ 0.766][mmc]: mmc_config_clock: clk 25000000
[ 0.776][mmc]: mmc_config_clock: clk 50000000
[ 0.784][mmc]: CID 0x15010034 0x46544534 0x5201035c 0x5aeb6681
[ 0.789][mmc]: MMC v5.1
[ 0.792][mmc]: mmc clk 50000000
[ 0.795][mmc]: SD/MMC Card: 8bit, capacity: 3728MB
[ 0.800][mmc]: boot0 capacity: 4000KB,boot1 capacity: 4000KB
[ 0.806][mmc]: ***SD/MMC 2 init OK!!!***
[ 0.812][mmc]: erase_grp_size:0x400WrBlk * 0x200 = 0x80000 Byte
[ 0.818][mmc]: secure_feature 0x55
[ 0.821][mmc]: secure_removal_type 0x39
[ 0.825]sunxi flash init ok
In: serial
Out: serial
Err: serial
--------fastboot partitions--------
-total partitions:8-
-name- -start- -size-
boot-res : 1000000 800000
env : 1800000 200000
boot : 1a00000 800000
rootfs : 2200000 6400000
rootfs_data : 8600000 2a000000
app : 32600000 8c000000
misc : be600000 400000
UDISK : bea00000 0
-----------------------------------
base bootcmd=run setargs_nand boot_normal
bootcmd set setargs_mmc
key 0
cant find rcvy value
cant find fstbt value
misc partition found
to be run cmd=run setargs_mmc boot_normal
sunxi_serial: sn_filename is not exist
serial is: 27f789046009ffffd471
Net: usb_etherWarning: failed to set MAC address
WORK_MODE_BOOT
check_update_key_gpio: 49 gpio_set_one_pin_io_status ret = 0
not goto fel mode!
board_status_probe
[ 0.952]key trigger
[ 0.954]probe MP tools from boot
delay time 0
[ 1.025]usb init ok
usb sof ok
[ 1.201]usb probe ok
IRQ: EP0
IRQ: EP0
set address 0x2e
IRQ: EP0
IRQ: EP0
IRQ: EP0
IRQ: EP0
IRQ: EP0
IRQ: EP0
IRQ: EP0
IRQ: EP0
IRQ: EP0
IRQ: EP0
IRQ: EP0
usb: have no handshake
[ 3.239]Hit any key to stop autoboot: 0
sunxi#
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment