x510_uboot_commads.txt

Bootloader 2.0.25 loaded
Press <Ctrl+B> for the Boot Menu
Flash: 64 MB
*** Warning - bad CRC, using default environment

        00  01  14e4  b321  0200  ff
Epi3:  Station address is: ec:cd:6d:86:a8:64
USB:   Register 1212 NbrPorts 2
USB EHCI 1.00
scanning bus for devices... 1 USB Device(s) found
Net:   No ethernet found.

x510> help
?       - alias for 'help'
awbootf - Start the AlliedWare+ bootup sequence from flash
awbootm - Start the AlliedWare+ bootup sequence from a location in memory
base    - print or set address offset
bdinfo  - print Board Info structure
boot    - boot default, i.e., run 'bootcmd'
bootd   - boot default, i.e., run 'bootcmd'
bootelf - Boot from an ELF image in memory
bootm   - boot application image from memory
bootmenu- <INTERNAL COMMAND **DO NOT USE**>
bootp   - boot image via network using BOOTP/TFTP protocol
bootupda- <INTERNAL COMMAND **DO NOT USE**>
bootvx  - Boot vxWorks from an ELF image
cmp     - memory compare
coninfo - print console devices and information
cp      - memory copy
crc32   - checksum calculation
date    - get/set/reset date & time
delay   - delay for N (decimal) microseconds/milliseconds/seconds (not calibrated)
echo    - echo args to console
editenv - edit environment variable
epi3mk  - Make an EPI3 block
epi3psumk- epi3psumk    - Make an EPI3 block in a PSU

epi3show- Show current EPI3 information
erase   - erase FLASH memory
exit    - exit script
exttftp - Load via external TFTP
false   - do nothing, unsuccessfully
fatinfo - print information about filesystem
fatload - load binary file from a dos filesystem
fatls   - list files in a directory (default /)
flinfo  - print FLASH memory information
fsinfo  - print information about filesystems
fsload  - load binary file from a filesystem image
go      - start application at address 'addr'
help    - print command description/usage
i2c     - I2C sub-system
iminfo  - print header information for application image
imls    - list all images found in flash
imxtract- extract a part of a multi-image
itest   - return true/false on integer compare
loadb   - load binary file over serial line (kermit mode)
loads   - load S-Record file over serial line
loady   - load binary file over serial line (ymodem mode)
loop    - infinite loop on address range
ls      - list files in a directory (default /)
mat     - <Manufacturing Automation Tool entry **DO NOT USE**>
md      - memory display
mii     - MII utility commands
mm      - memory modify (auto-incrementing address)
mtest   - simple RAM read/write test
mw      - memory write (fill)
nfs     - boot image via network using NFS protocol
nm      - memory modify (constant address)
pci     - list and access PCI Configuration Space
ping    - send ICMP ECHO_REQUEST to network host
printenv- print environment variables
protect - enable or disable FLASH write protection
rarpboot- boot image via network using RARP/TFTP protocol
reloc   - print U-Boot relocation information
reset   - Perform RESET of the CPU
run     - run commands in an environment variable
saveenv - save environment variables to persistent storage
setenv  - set environment variables
showvar - print local hushshell variables
sleep   - delay execution for some time
source  - run script from memory
test    - minimal test like /bin/sh
tftpboot- boot image via network using TFTP protocol
tftpboot6- boot image via network using TFTP protocol
true    - do nothing, successfully
usb     - USB sub-system
usbboot - boot from USB device
version - print monitor version
x510>