Skip to content

Instantly share code, notes, and snippets.

View obvionaoe's full-sized avatar

Luís Guimarães obvionaoe

View GitHub Profile
@obvionaoe
obvionaoe / ForkMITLicensedProject.md
Created May 11, 2024 03:16 — forked from fbaierl/ForkMITLicensedProject.md
HOWTO fork a MIT licensed project

No, you are not allowed to change the copyright notice. Indeed, the license text states pretty clearly:

The above copyright notice and this permission notice shall be included in all
copies or substantial portions of the Software.

But you are allowed to add a copyright notice.

If you want to keep the MIT license, which is what I would advise you to do, you only need to add a single line to the license file, before or after Copyright (c) 2012 Some Name with your own copyright notice. The final LICENSE file will look like this:

The MIT License (MIT)

How to update IP addressing on a Proxmox Cluster

When you change something in your network configuration, rather than its the gateway or the IP addressing, you may come under serious troubleshooting on your Proxmox Cluster, so this document will guide you into the necessary steps needed to update your network settings on Proxmox.

Note : You must follow these steps on every single node of your cluster to let it able to handle the synchronization between each node once.

So firstly, you will need to change the network interface configuration of the system; it is preferable for you to set a static IP:

/etc/network/interfaces
@obvionaoe
obvionaoe / pve8arm-fresh.txt
Created April 27, 2024 15:18 — forked from gtx28/pve8arm-fresh.txt
PVE8-ARM fresh install
***Pi-Mox8 setup on raspberry pi 4b (cm4 you will need to add the appropriate steps for your hw setup)
***Raspberry PI OS setup
***Install raspbian x64 lite on raspberry pi
pull the latest copy of Raspberry Pi Imager, from here https://www.raspberrypi.com/software/ and Raspberry PI OS x64 lite based on debian 11 bullseye from here: https://www.raspberrypi.com/software/operating-systems/#raspberry-pi-os-64-bit
open imager, click choose os, scroll to the bottom and select custom. open the image "2023-05-03-raspios-bullseye-arm64-lite.img.xz"
# https://github.com/ironicbadger/quicksync_calc
# zoidberg - dell 7040 sff pc
CPU TEST FILE BITRATE TIME AVG_FPS AVG_SPEED AVG_WATTS
i5-6600T h264_1080p_cpu ribblehead_1080p_h264 18952 kb/s 116.352s 29.88 1.04x N/A
i5-6600T h264_1080p ribblehead_1080p_h264 18952 kb/s 20.774s 167.57 5.86x 6.59
i5-6600T h264_4k ribblehead_4k_h264 46881 kb/s 68.870s 50.52 1.78x 7.24
i5-6600T hevc_8bit ribblehead_1080p_hevc_8bit 14947 kb/s 50.236s 68.56 2.41x 9.68
i5-6600T hevc_4k_10bit ribblehead_4k_hevc_10bit 44617 kb/s x