obvionaoe

Markdown Cheat Sheet

Line breaks

hello\
world

hello\

obvionaoe

Run this to get the ip address of your docker container
(if the container is not running on it's own network, use the container that has the network)

docker inspect -f '{{range .NetworkSettings.Networks}}{{.IPAddress}}{{end}}' container_name_or_id

obvionaoe

use std::io::{stdout, Write};
use std::thread::sleep;
use std::time::Duration;

fn main() {
    let mut i: u32 = 0;

    while i <= 100 {
        print!("\r");
        print!("{{");

obvionaoe

#!/bin/sh

rm "$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)/$(basename "${BASH_SOURCE[0]}")"

obvionaoe

sudo pacman-key --refresh-keys

obvionaoe

#!/bin/bash
#
# Script to remove GPG key from git-crypt
#
# It will re-initialize git-crypt for the repository and re-add all keys except
# the one requested for removal.
#
# Note: You still need to change all your secrets to fully protect yourself.
# Removing a user will prevent them from reading future changes but they will
# still have a copy of the data up to the point of their removal.

obvionaoe

To install an Early Access Program version of a plugin in IntelliJ or Android Studio, follow these steps:

I'll be using this plugin as an example, change the values accordingly to your use case.

1. Find the Jetbrains marketplace page for the plugin you need (example: this pluigin)
2. Go to the versions tab (example: https://plugins.jetbrains.com/plugin/8191-sqldelight/versions)
3. Find the channel that has the version you need (example: alpha)
4. Then inside you IDE go to the Settings > Plugins and at the top press the cogwheel next to the Installed tab.
5. Choose Manage Plugin Repositories
6. On the window press the plus and add https://plugins.jetbrains.com/plugins/alpha/8191

obvionaoe

# https://github.com/ironicbadger/quicksync_calc

# zoidberg - dell 7040 sff pc
CPU       TEST            FILE                        BITRATE     TIME      AVG_FPS  AVG_SPEED  AVG_WATTS
i5-6600T  h264_1080p_cpu  ribblehead_1080p_h264       18952 kb/s  116.352s  29.88    1.04x      N/A
i5-6600T  h264_1080p      ribblehead_1080p_h264       18952 kb/s  20.774s   167.57   5.86x      6.59
i5-6600T  h264_4k         ribblehead_4k_h264          46881 kb/s  68.870s   50.52    1.78x      7.24
i5-6600T  hevc_8bit       ribblehead_1080p_hevc_8bit  14947 kb/s  50.236s   68.56    2.41x      9.68
i5-6600T  hevc_4k_10bit   ribblehead_4k_hevc_10bit    44617 kb/s                     x

obvionaoe

***Pi-Mox8 setup on raspberry pi 4b (cm4 you will need to add the appropriate steps for your hw setup)


***Raspberry PI OS setup

***Install raspbian x64 lite on raspberry pi

pull the latest copy of Raspberry Pi Imager, from here https://www.raspberrypi.com/software/ and Raspberry PI OS x64 lite based on debian 11 bullseye from here: https://www.raspberrypi.com/software/operating-systems/#raspberry-pi-os-64-bit

open imager, click choose os, scroll to the bottom and select custom. open the image "2023-05-03-raspios-bullseye-arm64-lite.img.xz"

obvionaoe

How to update IP addressing on a Proxmox Cluster

When you change something in your network configuration, rather than its the gateway or the IP addressing, you may come under serious troubleshooting on your Proxmox Cluster, so this document will guide you into the necessary steps needed to update your network settings on Proxmox.

Note : You must follow these steps on every single node of your cluster to let it able to handle the synchronization between each node once.

So firstly, you will need to change the network interface configuration of the system; it is preferable for you to set a static IP:

/etc/network/interfaces