Last active
December 26, 2015 20:39
-
-
Save olegslavkin/7210375 to your computer and use it in GitHub Desktop.
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Linux version 2.6.35.3-571-gcca29a0 (ubuntu@ubuntu) (gcc version 4.4.4 (4.4.4_09.06.2010) ) #8 PREEMPT Wed Sep 11 12:15:39 EDT 2013 | |
CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00053177 | |
CPU: VIVT data cache, VIVT instruction cache | |
Machine: Freescale MX28EVK board | |
Memory policy: ECC disabled, Data cache writeback | |
On node 0 totalpages: 32768 | |
free_area_init_node: node 0, pgdat c050de24, node_mem_map c0558000 | |
DMA zone: 32 pages used for memmap | |
DMA zone: 0 pages reserved | |
DMA zone: 4064 pages, LIFO batch:0 | |
Normal zone: 224 pages used for memmap | |
Normal zone: 28448 pages, LIFO batch:7 | |
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512 | |
Kernel command line: -e noinitrd console=ttyAM0,115200 ubi.mtd=1 root=ubi0:rootfs0 rootfstype=ubifs rw gpmi | |
PID hash table entries: 512 (order: -1, 2048 bytes) | |
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) | |
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) | |
Memory: 128MB = 128MB total | |
Memory: 120380k/120380k available, 10692k reserved, 0K highmem | |
Virtual kernel memory layout: | |
vector : 0xffff0000 - 0xffff1000 ( 4 kB) | |
fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) | |
DMA : 0xfde00000 - 0xffe00000 ( 32 MB) | |
vmalloc : 0xc8800000 - 0xf0000000 ( 632 MB) | |
lowmem : 0xc0000000 - 0xc8000000 ( 128 MB) | |
modules : 0xbf000000 - 0xc0000000 ( 16 MB) | |
.init : 0xc0008000 - 0xc0030000 ( 160 kB) | |
.text : 0xc0030000 - 0xc04d1000 (4740 kB) | |
.data : 0xc04d2000 - 0xc050e800 ( 242 kB) | |
SLUB: Genslabs=11, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 | |
Hierarchical RCU implementation. | |
RCU-based detection of stalled CPUs is disabled. | |
Verbose stalled-CPUs detection is disabled. | |
NR_IRQS:288 | |
Console: colour dummy device 80x30 | |
console [ttyAM0] enabled | |
Calibrating delay loop... 226.09 BogoMIPS (lpj=1130496) | |
pid_max: default: 32768 minimum: 301 | |
Security Framework initialized | |
SELinux: Initializing. | |
SELinux: Starting in permissive mode | |
Mount-cache hash table entries: 512 | |
CPU: Testing write buffer coherency: ok | |
regulator: core version 0.5 | |
NET: Registered protocol family 16 | |
regulator: vddd: 800 <--> 1575 mV at 1500 mV fast normal | |
regulator: vdddbo: 800 <--> 1575 mV fast normal | |
regulator: vdda: 1500 <--> 2275 mV at 1800 mV fast normal | |
vddio = 3380000, val=10 | |
regulator: vddio: 2880 <--> 3680 mV at 3380 mV fast normal | |
regulator: overall_current: fast normal | |
regulator: vbus5v: | |
regulator: mxs-duart-1: fast normal | |
regulator: mxs-bl-1: fast normal | |
regulator: mxs-i2c-1: fast normal | |
regulator: mmc_ssp-1: fast normal | |
regulator: mmc_ssp-2: fast normal | |
regulator: charger-1: fast normal | |
regulator: power-test-1: fast normal | |
regulator: cpufreq-1: fast normal | |
i2c-core: driver [dummy] registered | |
i.MX IRAM pool: 120 KB@0xc8820000 | |
Initializing GPMI pins | |
Initializing GPMI pins | |
usb DR wakeup device is registered | |
IMX usb wakeup probe | |
the wakeup pdata is 0xc04da9bc | |
audit: cannot initialize inotify handle | |
bio: create slab <bio-0> at 0 | |
SCSI subsystem initialized | |
Freescale USB OTG Driver loaded, $Revision: 1.55 $ | |
usbcore: registered new interface driver usbfs | |
usbcore: registered new interface driver hub | |
usbcore: registered new device driver usb | |
Switching to clocksource mxs clock source | |
NET: Registered protocol family 2 | |
IP route cache hash table entries: 1024 (order: 0, 4096 bytes) | |
TCP established hash table entries: 4096 (order: 3, 32768 bytes) | |
TCP bind hash table entries: 4096 (order: 2, 16384 bytes) | |
TCP: Hash tables configured (established 4096 bind 4096) | |
TCP reno registered | |
UDP hash table entries: 256 (order: 0, 4096 bytes) | |
UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) | |
NET: Registered protocol family 1 | |
RPC: Registered udp transport module. | |
RPC: Registered tcp transport module. | |
RPC: Registered tcp NFSv4.1 backchannel transport module. | |
Trying to unpack rootfs image as initramfs... | |
rootfs image is not initramfs (junk in compressed archive); looks like an initrd | |
Freeing initrd memory: 4096K | |
Bus freq driver module loaded | |
IMX usb wakeup probe | |
the wakeup pdata is 0xc04dae6c | |
usb h1 wakeup device is registered | |
i2c i2c-0: adapter [MXS I2C adapter] registered | |
i2c 0-000a: uevent | |
i2c i2c-0: client [sgtl5000-i2c] registered with bus id 0-000a | |
i2c 0-0068: uevent | |
i2c i2c-0: client [m41t00] registered with bus id 0-0068 | |
mxs_cpu_init: cpufreq init finished | |
audit: initializing netlink socket (disabled) | |
type=2000 audit(0.660:1): initialized | |
VFS: Disk quotas dquot_6.5.2 | |
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) | |
JFFS2 version 2.2. (NAND) © 2001-2006 Red Hat, Inc. | |
msgmni has been set to 243 | |
alg: No test for stdrng (krng) | |
cryptodev: driver loaded. | |
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) | |
io scheduler noop registered | |
io scheduler deadline registered | |
io scheduler cfq registered (default) | |
get_max_memsize: mem_size now 614400 | |
mxsfb_check_var: xres 640, yres 480, bpp 16 | |
get_matching_pentry: 480:640:16 vs 480:640:16 | |
get_matching_pentry: 480:640:16 vs 480:640:16 | |
get_matching_pentry: 480:640:16 vs 480:640:16 | |
mxsfb_pan_display: var->xoffset 0, info->var.xoffset 0 | |
Console: switching to colour frame buffer device 80x30 | |
mxsfb_pan_display: var->xoffset 0, info->var.xoffset 0 | |
mxs-duart.0: ttyAM0 at MMIO 0x80074000 (irq = 47) is a DebugUART | |
UART set mode; UART - 0, mode - 0 | |
mxs-auart.0: ttySP0 at MMIO 0x8006a000 (irq = 112) is a mxs-auart.0 | |
Found APPUART 3.1.0 | |
UART set mode; UART - 1, mode - 1 | |
mxs-auart.1: ttySP1 at MMIO 0x8006c000 (irq = 113) is a mxs-auart.1 | |
Found APPUART 3.1.0 | |
UART set mode; UART - 2, mode - 2 | |
mxs-auart.2: ttySP2 at MMIO 0x8006e000 (irq = 114) is a mxs-auart.2 | |
Found APPUART 3.1.0 | |
UART set mode; UART - 3, mode - 0 | |
mxs-auart.3: ttySP3 at MMIO 0x80070000 (irq = 115) is a mxs-auart.3 | |
Found APPUART 3.1.0 | |
UART set mode; UART - 4, mode - 0 | |
brd: module loaded | |
loop: module loaded | |
i.MX GPMI NFC | |
NFC: Version 1, 8-chip GPMI and BCH | |
Boot ROM: Version 1, Single-chip boot area, block mark swapping supported | |
Scanning for NAND Flash chips... | |
NAND device: Manufacturer ID: 0x2c, Chip ID: 0xda (Micron NAND 256MiB 3,3V 8-bit) | |
----------------------------- | |
NAND Flash Device Information | |
----------------------------- | |
Manufacturer : Micron (0x2c) | |
Device Code : 0xda | |
Cell Technology : SLC | |
Chip Size : 256 MiB | |
Pages per Block : 64 | |
Page Geometry : 2048+64 | |
ECC Strength : 4 bits | |
ECC Size : 512 B | |
Data Setup Time : 20 ns | |
Data Hold Time : 10 ns | |
Address Setup Time: 20 ns | |
GPMI Sample Delay : 6 ns | |
tREA : Unknown | |
tRLOH : Unknown | |
tRHOH : Unknown | |
Description : MT29F2G08 | |
----------------- | |
Physical Geometry | |
----------------- | |
Chip Count : 1 | |
Page Data Size in Bytes: 2048 (0x800) | |
Page OOB Size in Bytes : 64 | |
Block Size in Bytes : 131072 (0x20000) | |
Block Size in Pages : 64 (0x40) | |
Chip Size in Bytes : 268435456 (0x10000000) | |
Chip Size in Pages : 131072 (0x20000) | |
Chip Size in Blocks : 2048 (0x800) | |
Medium Size in Bytes : 268435456 (0x10000000) | |
------------ | |
NFC Geometry | |
------------ | |
ECC Algorithm : BCH | |
ECC Strength : 8 | |
Page Size in Bytes : 2112 | |
Metadata Size in Bytes : 10 | |
ECC Chunk Size in Bytes: 512 | |
ECC Chunk Count : 4 | |
Payload Size in Bytes : 2048 | |
Auxiliary Size in Bytes: 16 | |
Auxiliary Status Offset: 12 | |
Block Mark Byte Offset : 1999 | |
Block Mark Bit Offset : 0 | |
----------------- | |
Boot ROM Geometry | |
----------------- | |
Boot Area Count : 1 | |
Boot Area Size in Bytes : 20971520 (0x1400000) | |
Stride Size in Pages : 64 | |
Search Area Stride Exponent: 2 | |
Scanning device for bad blocks | |
Boot area protection is enabled. | |
Creating 2 MTD partitions on "gpmi-nfc-main": | |
0x000000000000-0x000001400000 : "gpmi-nfc-0-boot" | |
0x000001400000-0x000010000000 : "gpmi-nfc-general-use" | |
UBI: attaching mtd1 to ubi0 | |
UBI: physical eraseblock size: 131072 bytes (128 KiB) | |
UBI: logical eraseblock size: 126976 bytes | |
UBI: smallest flash I/O unit: 2048 | |
UBI: VID header offset: 2048 (aligned 2048) | |
UBI: data offset: 4096 | |
UBI: attached mtd1 to ubi0 | |
UBI: MTD device name: "gpmi-nfc-general-use" | |
UBI: MTD device size: 236 MiB | |
UBI: number of good PEBs: 1888 | |
UBI: number of bad PEBs: 0 | |
UBI: max. allowed volumes: 128 | |
UBI: wear-leveling threshold: 4096 | |
UBI: number of internal volumes: 1 | |
UBI: number of user volumes: 2 | |
UBI: available PEBs: 0 | |
UBI: total number of reserved PEBs: 1888 | |
UBI: number of PEBs reserved for bad PEB handling: 18 | |
UBI: max/mean erase counter: 2/1 | |
UBI: image sequence number: 0 | |
UBI: background thread "ubi_bgt0d" started, PID 997 | |
ubiblka: unknown partition table | |
ubiblkb: unknown partition table | |
mxs-spi mxs-spi.0: Max possible speed 24000 = 24000000/2 kHz | |
mxs-spi mxs-spi.0: at 0x80014000 mapped to 0xF0014000, irq=84, bus 1, DMA ver_major 4 | |
Freescale FlexCAN Driver | |
FEC Ethernet Driver | |
fec_enet_mii_bus: probed | |
Register PTP device as char /dev/ptp | |
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver | |
fsl-ehci fsl-ehci: Freescale On-Chip EHCI Host Controller | |
fsl-ehci fsl-ehci: new USB bus registered, assigned bus number 1 | |
fsl-ehci fsl-ehci: irq 92, io base 0x80090000 | |
fsl-ehci fsl-ehci: USB 2.0 started, EHCI 1.00 | |
hub 1-0:1.0: USB hub found | |
hub 1-0:1.0: 1 port detected | |
Initializing USB Mass Storage driver... | |
usbcore: registered new interface driver usb-storage | |
USB Mass Storage support registered. | |
ARC USBOTG Device Controller driver (1 August 2005) | |
mice: PS/2 mouse device common for all mice | |
input: MXS touchscreen as /devices/virtual/input/input0 | |
rtc-ds1307 0-0068: probe | |
rtc-ds1307 0-0068: DS1307 probe | |
i2c i2c-0: master_xfer[0] W, addr=0x68, len=1 | |
i2c i2c-0: master_xfer[1] R, addr=0x68, len=8 | |
mxs-i2c mxs-i2c.0: addr: 0x0068, len: 1, flags: 0x0, stop: 0 | |
mxs-i2c mxs-i2c.0: Done with err=0 | |
mxs-i2c mxs-i2c.0: addr: 0x0068, len: 8, flags: 0x1, stop: 1 | |
mxs-i2c mxs-i2c.0: Done with err=0 | |
m41t00: dev (254:0) | |
rtc-ds1307 0-0068: rtc core: registered m41t00 as rtc0 | |
i2c-core: driver [rtc-ds1307] registered | |
i2c /dev entries driver | |
i2c-core: driver [dev_driver] registered | |
i2c-dev: adapter [MXS I2C adapter] registered as minor 0 | |
IR NEC protocol handler initialized | |
IR RC5(x) protocol handler initialized | |
IR RC6 protocol handler initialized | |
IR JVC protocol handler initialized | |
IR Sony protocol handler initialized | |
Linux video capture interface: v2.00 | |
i2c-core: driver [ir-kbd-i2c] registered | |
WARNING : No battery connected ! | |
Aborting power driver initialization | |
mxs-battery: probe of mxs-battery.0 failed with error 1 | |
mxs watchdog: initialized, heartbeat 19 sec | |
mxs-mmc: MXS SSP Controller MMC Interface driver | |
mxs-mmc mxs-mmc.0: mmc0: MXS SSP MMC DMAIRQ 82 ERRIRQ 96 | |
Registered led device: led-pwm0 | |
Registered led device: led-pwm1 | |
dcp dcp.0: DCP crypto enabled.! | |
usbcore: registered new interface driver hiddev | |
usbcore: registered new interface driver usbhid | |
usbhid: USB HID core driver | |
TCP cubic registered | |
NET: Registered protocol family 17 | |
can: controller area network core (rev 20090105 abi 8) | |
NET: Registered protocol family 29 | |
regulator_init_complete: incomplete constraints, leaving vbus5v on | |
i2c i2c-0: master_xfer[0] W, addr=0x68, len=1 | |
i2c i2c-0: master_xfer[1] R, addr=0x68, len=7 | |
mxs-i2c mxs-i2c.0: addr: 0x0068, len: 1, flags: 0x0, stop: 0 | |
mxs-i2c mxs-i2c.0: Done with err=0 | |
mxs-i2c mxs-i2c.0: addr: 0x0068, len: 7, flags: 0x1, stop: 1 | |
mxs-i2c mxs-i2c.0: Done with err=0 | |
rtc-ds1307 0-0068: read: 25 80 81 f1 81 21 00 | |
rtc-ds1307 0-0068: read secs=25, mins=0, hours=1, mday=1, mon=0, year=100, wday=0 | |
rtc-ds1307 0-0068: setting system clock to 2000-01-01 01:00:25 UTC (946688425) | |
UBIFS: mounted UBI device 0, volume 0, name "rootfs0" | |
UBIFS: file system size: 229318656 bytes (223944 KiB, 218 MiB, 1806 LEBs) | |
UBIFS: journal size: 11427840 bytes (11160 KiB, 10 MiB, 90 LEBs) | |
UBIFS: media format: w4/r0 (latest is w4/r0) | |
UBIFS: default compressor: lzo | |
UBIFS: reserved for root: 4952683 bytes (4836 KiB) | |
VFS: Mounted root (ubifs filesystem) on device 0:14. | |
Freeing init memory: 160K | |
ehci_fsl_bus_suspend, Host 1 | |
i2c 0-000a: uevent | |
rtc-ds1307 0-0068: uevent | |
eth0: Freescale FEC PHY driver [SMSC LAN8710/LAN8720] (mii_bus:phy_addr=0:00, irq=-1) | |
PHY: 0:00 - Link is Up - 100/Full | |
Resetting PHY | |
mxsfb_blank: FB_BLANK_POWERDOWN | |
mxsfb_task: state = 0, data->task_state = -1 | |
set_controller_state, old_state 1, state 0 |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment