startx_log

XFree86 Version 3.3.6 / X Window System
(protocol Version 11, revision 0, vendor release 6300)
Release Date: January 8 1999
        If the server is older than 6-12 months, or if your card is newer
        than the above date, look for a newer version before reporting
        problems.  (see http://www.XFree86.Org/FAQ)
Operating System: Linux 2.2.13 i686 [ELF] 
Configured drivers:
  S3: accelerated server for S3 graphics adaptors (Patchlevel 0)
      newmmio, mmio_928, s3_generic
(using VT number 7)

XF86Config: /etc/XF86Config
(**) stands for supplied, (--) stands for probed/default values
(**) XKB: keycodes: "xfree86"
(**) XKB: types: "default"
(**) XKB: compat: "default"
(**) XKB: symbols: "us(pc101)"
(**) XKB: geometry: "pc"
(**) XKB: rules: "xfree86"
(**) XKB: model: "pc104"
(**) XKB: layout: "us"
(**) Mouse: type: Microsoft, device: /dev/mouse, baudrate: 4800
(**) Mouse: resolution: 100, buttons: 3
(**) Mouse: 3 button emulation (timeout: 50ms)
(**) S3: Graphics device ID: "S3 Vision968"
(**) S3: Monitor ID: "Primary Monitor"
(**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc:unscaled,/usr/X11R6/lib/X11/fonts/75dpi:unscaled,/usr/X11R6/lib/X11/fonts/100dpi:unscaled,/usr/X11R6/lib/X11/fonts/Type1,/usr/X11R6/lib/X11/fonts/Speedo"
(--) S3: PCI: base address not correctly aligned or address conflict
                base address changed from 0xfa000000 to 0xf8000000
(--) S3: PCI: 968 rev 0, Linear FB @ 0xf8000000
(--) S3: chipset:   968 rev. 0
(--) S3: chipset driver: newmmio
(**) S3: Option "slow_vram"
(**) S3: Option "s3_slow_vram"
(--) S3: card type: PCI
(**) S3: videoram:  4096k
(--) S3: Detected an IBM RGB524 ramdac rev. e0
(--) S3: Ramdac type: ibm_rgb524
(**) S3: Ramdac speed: 170 MHz
(--) S3: Using hardware cursor from IBM RGB52x RAMDAC
(--) S3: Using IBM RGB52x programmable clock (MCLK 187.500 MHz)
(**) S3: with refclock 50.000 MHz (probed 15.952 & 16.041)
(--) S3: Maximum allowed dot-clock: 170.000 MHz
(**) S3: Mode "1024x768": mode clock =  65.000
(--) S3: Operating RAMDAC in pixel multiplex mode
(**) S3: Using 16 bpp.  Color weight: 565
(**) S3: Virtual resolution set to 1024x768
(--) S3: Local bus LAW is 0xF8000000
(--) S3: Using a banksize of 4096k, line width of 1024
(--) S3: Using a single 64x64 area at (960,768) for expanding pixmaps
(--) S3: Using 16 planes of 1024x1216 at (0,832) aligned 8 as font cache
xfwm message (type SessionInit):  X Session Manager not available
Using builtin session management instead

/home/patrick//.xfce/xfbdrc File not found.
sox: Can't open output file '/dev/dsp': Permission denied
Loading GNOME menus
Loading KDE menus
sox: Can't open output file '/dev/dsp': Permission denied

waiting for X server to shut down sox: Can't open output file '/dev/dsp': Permission denied

x86box_slackware-7.1_16bit

Section "Files"
   RgbPath    "/usr/X11R6/lib/X11/rgb"
   FontPath   "/usr/X11R6/lib/X11/fonts/misc:unscaled"
   FontPath   "/usr/X11R6/lib/X11/fonts/75dpi:unscaled"
   FontPath   "/usr/X11R6/lib/X11/fonts/100dpi:unscaled"
   FontPath   "/usr/X11R6/lib/X11/fonts/Type1"
   FontPath   "/usr/X11R6/lib/X11/fonts/Speedo"
EndSection

Section "ServerFlags"
EndSection

Section "Keyboard"
   Protocol        "Standard"
   AutoRepeat      500 30
   LeftAlt         Meta
   RightAlt        Meta
   ScrollLock      Compose
   RightCtl        Control
   XkbKeycodes     "xfree86"
   XkbTypes        "default"
   XkbCompat       "default"
   XkbSymbols      "us(pc101)"
   XkbGeometry     "pc"
   XkbRules        "xfree86"
   XkbModel        "pc104"
   XkbLayout       "us"
EndSection

Section "Pointer"
   Protocol        "Microsoft"
   Device          "/dev/mouse"
   BaudRate        4800
   Emulate3Timeout 50
   Resolution      100
   Buttons         3
   Emulate3Buttons
EndSection

Section "Monitor"
   Identifier      "Primary Monitor"
   VendorName      "Unknown"
   ModelName       "Unknown"
   HorizSync       30-64
   VertRefresh     50-130
#   Modeline        "1024x768" 65 1024 1032 1176 1344 768 771 777 806
   Modeline        "1024x768" 65 1024 1048 1208 1248 768 768 776 807
EndSection

Section "Device"
   Identifier      "Cirrus Logic GD5429"
   VendorName      "Cirrus Logic"
   BoardName       "CL-GD5429"
   chipset         "clgd5429"
   Option          "probe_clocks"
   Clockchip       "cirrus"
   videoram        2048
EndSection

Section "Device"
  Identifier       "S3 Vision968"
  s3RefClk         50
  DACspeed         170
  Option           "slow_vram"
  videoram         4096
EndSection

Section "Screen"
   Driver          "svga"
   Device          "Cirrus Logic GD5429"
   Monitor         "Primary Monitor"
   DefaultColorDepth    8
   Subsection "Display"
      Depth        8
      Modes        "1024x768"
      ViewPort     0 0
      Virtual      1024 768
   EndSubsection
   SubSection "Display"
      Depth        16
      Modes        "1024x768"
      ViewPort     0 0
      Virtual      1024 768
   EndSubSection
EndSection

Section "Screen"
   Driver          "accel"
   Device          "S3 Vision968"
   Monitor         "Primary Monitor"
   DefaultColorDepth    16
   Subsection "Display"
      Depth        8
      Modes        "1024x768"
      ViewPort     0 0
      Virtual      1024 768
   EndSubsection
   SubSection "Display"
      Depth        16
      Modes        "1024x768"
      ViewPort     0 0
      Virtual      1024 768
   EndSubSection
EndSection