M122

=== Diagnostics ===
RepRapFirmware for STM32F4 based Boards (biquskr_rrf_e3_1.1) version 3.3RC3_2 (2021-05-30 15:30:06) running on STM32F4
Used output buffers: 3 of 40 (11 max)
=== RTOS ===
Static ram: 22152
Dynamic ram: 62528 of which 36 recycled
Never used RAM 45328, free system stack 193 words
Tasks: NETWORK(ready,8.8%,266) HEAT(delaying,0.0%,343) Move(notifyWait,0.0%,333) MAIN(running,89.1%,459) IDLE(ready,2.1%,30), total 100.0%
Owned mutexes: WiFi(NETWORK)
=== Platform ===
Last reset 00:00:35 ago, cause: [software]
Last software reset at 2021-06-06 18:41, reason: User, GCodes spinning, available RAM 45152, slot 0
Software reset code 0x0003 HFSR 0x00000000 CFSR 0x00000000 ICSR 0x00438000 BFAR 0xe000ed38 SP 0x00000000 Task MAIN Freestk 0 n/a
Error status: 0x00
Aux0 errors 0,0,0
Step timer max interval 0
MCU temperature: min 47.8, current 48.0, max 48.2
Supply voltage: min 24.0, current 24.0, max 24.0, under voltage events: 0, over voltage events: 0, power good: yes
Heap OK, handles allocated/used 0/0, heap memory allocated/used/recyclable 0/0/0, gc cycles 0
Driver 0: position 0
Driver 1: position 0
Driver 2: position 0
Driver 3: position 0
Driver 4: position 0
Driver 5: position 0
Driver 6: position 0
Driver 7: position 0
Driver 8: position 0
Driver 9: position 0
Driver 10: position 0
Date/time: 2021-06-06 18:41:57
Slowest loop: 3.82ms; fastest: 0.08ms
=== Storage ===
Free file entries: 10
SD card 0 detected
SD card longest read time 1.7ms, write time 0.0ms, max retries 0
=== Move ===
DMs created 83, maxWait 0ms, bed compensation in use: none, comp offset 0.000
=== DDARing ===
Scheduled moves 0, completed moves 0, hiccups 0, stepErrors 0, LaErrors 0, Underruns [0, 0, 0], CDDA state -1
=== Heat ===
Bed heaters = 0, chamberHeaters = -1
Heater 1 is on, I-accum = 0.0
=== GCodes ===
Segments left: 0
Movement lock held by null
HTTP is idle in state(s) 0
File is idle in state(s) 0
USB is idle in state(s) 0
Aux is idle in state(s) 0
Trigger is idle in state(s) 0
Queue is idle in state(s) 0
LCD is idle in state(s) 0
Daemon is idle in state(s) 0
Autopause is idle in state(s) 0
Code queue is empty.
=== Network ===
Slowest loop: 4.99ms; fastest: 0.00ms
Responder states: HTTP(2) HTTP(0) HTTP(0) HTTP(0)
HTTP sessions: 1 of 8
- WiFi -
Network state is active
WiFi module is connected to access point 
Failed messages: pending 0, notready 0, noresp 0
WiFi firmware version 1.25-01S-D
WiFi MAC address 70:3a:cb:7c:09:34
WiFi Vcc 3.50, reset reason Turned on by main processor
WiFi flash size 4194304, free heap 30400
WiFi IP address 192.168.86.37
WiFi signal strength -57dBm, mode 802.11n, reconnections 0, sleep mode modem
Clock register 00004002
Socket states: 4 0 0 0 0 0 0 0