Skip to content

Instantly share code, notes, and snippets.

Show Gist options
  • Save omac777/10a617d6556e4d532f50ac31eefcb930 to your computer and use it in GitHub Desktop.
Save omac777/10a617d6556e4d532f50ac31eefcb930 to your computer and use it in GitHub Desktop.
starfive visionfive 2 arch linux 6.6.20-cwt-5.12.0-3 serial boot output
U-Boot SPL 2024.04 (May 23 2024 - 05:13:07 +0000)
DDR version: dc2e84f0.
Trying to boot from MMC2
OpenSBI v1.2
____ _____ ____ _____
/ __ \ / ____| _ \_ _|
| | | |_ __ ___ _ __ | (___ | |_) || |
| | | | '_ \ / _ \ '_ \ \___ \| _ < | |
| |__| | |_) | __/ | | |____) | |_) || |_
\____/| .__/ \___|_| |_|_____/|___/_____|
| |
|_|
Platform Name : StarFive VisionFive 2 v1.3B
Platform Features : medeleg
Platform HART Count : 5
Platform IPI Device : aclint-mswi
Platform Timer Device : aclint-mtimer @ 4000000Hz
Platform Console Device : uart8250
Platform HSM Device : ---
Platform PMU Device : ---
Platform Reboot Device : gpio-restart
Platform Shutdown Device : ---
Platform Suspend Device : ---
Firmware Base : 0x40000000
Firmware Size : 392 KB
Firmware RW Offset : 0x40000
Runtime SBI Version : 1.0
Domain0 Name : root
Domain0 Boot HART : 2
Domain0 HARTs : 0*,1*,2*,3*,4*
Domain0 Region00 : 0x0000000002000000-0x000000000200ffff M: (I,R,W) S/U: ()
Domain0 Region01 : 0x0000000040000000-0x000000004003ffff M: (R,X) S/U: ()
Domain0 Region02 : 0x0000000040040000-0x000000004007ffff M: (R,W) S/U: ()
Domain0 Region03 : 0x0000000000000000-0xffffffffffffffff M: (R,W,X) S/U: (R,W,X)
Domain0 Next Address : 0x0000000040200000
Domain0 Next Arg1 : 0x0000000040400000
Domain0 Next Mode : S-mode
Domain0 SysReset : yes
Domain0 SysSuspend : yes
Boot HART ID : 2
Boot HART Domain : root
Boot HART Priv Version : v1.11
Boot HART Base ISA : rv64imafdcbx
Boot HART ISA Extensions : none
Boot HART PMP Count : 8
Boot HART PMP Granularity : 4096
Boot HART PMP Address Bits: 34
Boot HART MHPM Count : 2
Boot HART MIDELEG : 0x0000000000000222
Boot HART MEDELEG : 0x000000000000b109
U-Boot 2024.04 (May 23 2024 - 05:13:07 +0000)
CPU: rv64imafdc_zba_zbb
Model: StarFive VisionFive 2 v1.3B
DRAM: 8 GiB
Core: 135 devices, 26 uclasses, devicetree: board
WDT: Not starting watchdog@13070000
MMC: mmc@16010000: 0, mmc@16020000: 1
Loading Environment from SPIFlash... SF: Detected gd25lq128 with page size 256 Bytes, erase size 4 KiB, total 16 MiB
OK
StarFive EEPROM format v2
--------EEPROM INFO--------
Vendor : StarFive Technology Co., Ltd.
Product full SN: VF7110B1-2253-D008E000-00002621
data version: 0x2
PCB revision: 0xb2
BOM revision: A
Ethernet MAC0 address: 6c:cf:39:00:36:43
Ethernet MAC1 address: 6c:cf:39:00:36:44
--------EEPROM INFO--------
starfive_7110_pcie pcie@2b000000: Starfive PCIe bus probed.
starfive_7110_pcie pcie@2c000000: Starfive PCIe bus probed.
In: serial@10000000
Out: serial@10000000
Err: serial@10000000
Net: eth0: ethernet@16030000, eth1: ethernet@16040000
starting USB...
Bus xhci_pci: Register 5000420 NbrPorts 5
Starting the controller
USB XHCI 1.00
scanning bus xhci_pci for devices... 4 USB Device(s) found
scanning usb for storage devices... 0 Storage Device(s) found
Working FDT set to ff72f9b0
Hit any key to stop autoboot: 0
Card did not respond to voltage select! : -110
** Booting bootflow 'mmc@16020000.bootdev.part_3' with extlinux
1: Arch Linux
Retrieving file: /vmlinuz
Retrieving file: /initramfs-linux.img
append: root="LABEL=VF2" rw console=tty1 console=ttyS0,115200 earlycon rootwait stmmaceth=chain_mode:1 selinux=0 rootflags=defaults,discard=async,compress=lzo,user_subvol_rm_allowed,subvol=@
Retrieving file: /dtbs/starfive/jh7110-starfive-visionfive-2-v1.3b.dtb
Uncompressing Kernel Image to 0
## Flattened Device Tree blob at 46000000
Booting using the fdt blob at 0x46000000
Working FDT set to 46000000
Loading Ramdisk to fdf6f000, end fe720d7d ... OK
Loading Device Tree to 00000000fdf5e000, end 00000000fdf6e6af ... OK
Working FDT set to fdf5e000
Starting kernel ...
[ 0.000000] Linux version 6.6.20-cwt-5.12.0-3 (cwt@VF2-B) (gcc (GCC) 14.1.1 20240522, GNU ld (GNU Binutils) 2.42.0) #1 SMP PREEMPT_DYNAMIC Mon May 27 18:59:29 +07 2024
[ 0.000000] Machine model: StarFive VisionFive 2 v1.3B
[ 0.000000] SBI specification v1.0 detected
[ 0.000000] SBI implementation ID=0x1 Version=0x10002
[ 0.000000] SBI TIME extension detected
[ 0.000000] SBI IPI extension detected
[ 0.000000] SBI RFENCE extension detected
[ 0.000000] SBI SRST extension detected
[ 0.000000] earlycon: uart0 at MMIO32 0x0000000010000000 (options '115200n8')
[ 0.000000] printk: bootconsole [uart0] enabled
[ 0.000000] efi: UEFI not found.
[ 0.000000] Reserved memory: created CMA memory pool at 0x0000000070000000, size 512 MiB
[ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
[ 0.000000] OF: reserved mem: 0x0000000070000000..0x000000008fffffff (524288 KiB) map reusable linux,cma
[ 0.000000] OF: reserved mem: 0x0000000040000000..0x000000004003ffff (256 KiB) map non-reusable mmode_resv0@40000000
[ 0.000000] OF: reserved mem: 0x0000000040040000..0x000000004007ffff (256 KiB) map non-reusable mmode_resv1@40040000
[ 0.000000] OF: reserved mem: 0x0000000069c00000..0x000000006bbffffe (32767 KiB) map non-reusable xrpbuffer@f0000000
[ 0.000000] OF: reserved mem: 0x000000006ce00000..0x000000006e3fffff (22528 KiB) map non-reusable e24@c0000000
[ 0.000000] Zone ranges:
[ 0.000000] DMA32 [mem 0x0000000040000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000023fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000040000000-0x000000023fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000023fffffff]
[ 0.000000] SBI HSM extension detected
[ 0.000000] CPU with hartid=0 is not available
[ 0.000000] Falling back to deprecated "riscv,isa"
[ 0.000000] riscv: base ISA extensions acdfim
[ 0.000000] riscv: ELF capabilities acdfim
[ 0.000000] percpu: Embedded 20 pages/cpu s44920 r8192 d28808 u81920
[ 0.000000] Kernel command line: root="LABEL=VF2" rw console=tty1 console=ttyS0,115200 earlycon rootwait stmmaceth=chain_mode:1 selinux=0 rootflags=defaults,discard=async,compress=lzo,user_subvol_rm_allowed,subvol=@
[ 0.000000] Unknown kernel command line parameters "stmmaceth=chain_mode:1", will be passed to user space.
[ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 2064384
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] software IO TLB: area num 4.
[ 0.000000] software IO TLB: mapped [mem 0x00000000f9f5e000-0x00000000fdf5e000] (64MB)
[ 0.000000] Memory: 7545208K/8388608K available (11861K kernel code, 5119K rwdata, 6144K rodata, 2219K init, 862K bss, 319112K reserved, 524288K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Dynamic Preempt: full
[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[ 0.000000] rcu: RCU priority boosting: priority 1 delay 500 ms.
[ 0.000000] rcu: RCU debug extended QS entry/exit.
[ 0.000000] Trampoline variant of Tasks RCU enabled.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] riscv-intc: 64 local interrupts mapped
[ 0.000000] plic: interrupt-controller@c000000: mapped 136 interrupts with 4 handlers for 9 contexts.
[ 0.000000] riscv: providing IPIs using SBI IPI extension
[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.000000] clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x1d854df40, max_idle_ns: 881590404240 ns
[ 0.000001] sched_clock: 64 bits at 4MHz, resolution 250ns, wraps every 2199023255500ns
[ 0.009325] Console: colour dummy device 80x25
[ 0.014232] printk: console [tty1] enabled
[ 0.019405] Calibrating delay loop (skipped), value calculated using timer frequency.. 8.00 BogoMIPS (lpj=4000)
[ 0.030514] pid_max: default: 32768 minimum: 301
[ 0.038646] LSM: initializing lsm=capability,landlock,lockdown,yama,safesetid,apparmor,integrity
[ 0.049137] landlock: Up and running.
[ 0.053175] Yama: becoming mindful.
[ 0.057102] AppArmor: AppArmor initialized
[ 0.062853] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.071346] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.084976] CPU node for /cpus/cpu@0 exist but the possible cpu range is :0-3
[ 0.094299] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
[ 0.102189] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
[ 0.110645] riscv: ELF compat mode unsupported
[ 0.110656] ASID allocator disabled (0 bits)
[ 0.120417] rcu: Hierarchical SRCU implementation.
[ 0.125697] rcu: Max phase no-delay instances is 400.
[ 0.132118] EFI services will not be available.
[ 0.137627] smp: Bringing up secondary CPUs ...
[ 0.150671] cpu1: Ratio of byte access time to unaligned word access is 0.01, unaligned accesses are slow
[ 0.168782] cpu2: Ratio of byte access time to unaligned word access is 0.01, unaligned accesses are slow
[ 0.186889] cpu3: Ratio of byte access time to unaligned word access is 0.01, unaligned accesses are slow
[ 0.197540] smp: Brought up 1 node, 4 CPUs
[ 0.205300] devtmpfs: initialized
[ 0.220109] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[ 0.230845] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.254870] pinctrl core: initialized pinctrl subsystem
[ 0.267023] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.274562] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
[ 0.282528] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.291387] audit: initializing netlink subsys (disabled)
[ 0.297581] audit: type=2000 audit(0.128:1): state=initialized audit_enabled=0 res=1
[ 0.298077] thermal_sys: Registered thermal governor 'step_wise'
[ 0.306163] cpuidle: using governor menu
[ 0.324136] cpu0: Ratio of byte access time to unaligned word access is 0.01, unaligned accesses are slow
[ 0.336231] CCACHE: DataError @ 0x00000000.080225F8
[ 0.341745] CCACHE: DataFail @ 0x00000000.080225E4
[ 0.347146] CCACHE: 8 banks, 16 ways, sets/bank=256, bytes/block=64
[ 0.354047] CCACHE: max_line=2047, 64 bytes/line, 131072 bytes/way
[ 0.360847] CCACHE: Index of the largest way enabled: 15
[ 0.366724] pL2CACHE_PMU: perfmon-counters: 64 for CPU 0
[ 0.372748] pL2CACHE_PMU: perfmon-counters: 64 for CPU 1
[ 0.378745] pL2CACHE_PMU: perfmon-counters: 64 for CPU 2
[ 0.384742] pL2CACHE_PMU: perfmon-counters: 64 for CPU 3
[ 0.397528] platform soc: Fixed dependency cycle(s) with /soc/interrupt-controller@c000000
[ 0.422923] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.430408] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page
[ 0.437305] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.444771] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page
[ 0.454010] cryptd: max_cpu_qlen set to 1000
[ 0.476916] raid6: int64x8 gen() 890 MB/s
[ 0.498797] raid6: int64x4 gen() 1023 MB/s
[ 0.520665] raid6: int64x2 gen() 912 MB/s
[ 0.542535] raid6: int64x1 gen() 814 MB/s
[ 0.547239] raid6: using algorithm int64x4 gen() 1023 MB/s
[ 0.570392] raid6: .... xor() 562 MB/s, rmw enabled
[ 0.575761] raid6: using intx1 recovery algorithm
[ 0.581883] fbcon: Taking over console
[ 0.586621] SCSI subsystem initialized
[ 0.591039] usbcore: registered new interface driver usbfs
[ 0.597113] usbcore: registered new interface driver hub
[ 0.603016] usbcore: registered new device driver usb
[ 0.608904] mc: Linux media interface: v0.10
[ 0.613655] videodev: Linux video capture interface: v2.00
[ 0.620264] Advanced Linux Sound Architecture Driver Initialized.
[ 0.628061] NetLabel: Initializing
[ 0.631812] NetLabel: domain hash size = 128
[ 0.636607] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.642906] NetLabel: unlabeled traffic allowed by default
[ 0.649383] vgaarb: loaded
[ 0.653007] clocksource: Switched to clocksource riscv_clocksource
[ 0.663240] VFS: Disk quotas dquot_6.6.0
[ 0.667761] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.675658] FS-Cache: Loaded
[ 0.679732] AppArmor: AppArmor Filesystem Enabled
[ 0.698080] NET: Registered PF_INET protocol family
[ 0.704747] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.722795] tcp_listen_portaddr_hash hash table entries: 4096 (order: 5, 131072 bytes, linear)
[ 0.732536] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.741097] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.750667] TCP bind hash table entries: 65536 (order: 10, 4194304 bytes, linear)
[ 0.766313] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.775099] MPTCP token hash table entries: 8192 (order: 6, 393216 bytes, linear)
[ 0.783895] UDP hash table entries: 4096 (order: 6, 393216 bytes, linear)
[ 0.791945] UDP-Lite hash table entries: 4096 (order: 6, 393216 bytes, linear)
[ 0.801203] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.807498] NET: Registered PF_XDP protocol family
[ 0.812792] PCI: CLS 0 bytes, default 64
[ 0.817357] Unpacking initramfs...
[ 0.823928] Initialise system trusted keyrings
[ 0.828944] Key type blacklist registered
[ 0.833684] workingset: timestamp_bits=46 max_order=21 bucket_order=0
[ 0.840870] zbud: loaded
[ 0.855452] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
[ 0.863956] fuse: init (API version 7.39)
[ 0.917429] NET: Registered PF_ALG protocol family
[ 0.922754] xor: measuring software checksum speed
[ 0.931824] 8regs : 2604 MB/sec
[ 0.940444] 8regs_prefetch : 2594 MB/sec
[ 0.949050] 32regs : 2601 MB/sec
[ 0.957659] 32regs_prefetch : 2598 MB/sec
[ 0.962468] xor: using function: 8regs (2604 MB/sec)
[ 0.967954] Key type asymmetric registered
[ 0.972481] Asymmetric key parser 'x509' registered
[ 0.977985] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 0.986529] io scheduler mq-deadline registered
[ 0.991543] io scheduler kyber registered
[ 0.996569] io scheduler bfq registered
[ 1.109115] Serial: 8250/16550 driver, 6 ports, IRQ sharing disabled
[ 1.121759] random: crng init done
[ 1.137956] loop: module loaded
[ 1.145472] spi-nor spi0.0: gd25lq128d (16384 Kbytes)
[ 1.548701] Freeing initrd memory: 7876K
[ 1.570450] 4 fixed-partitions partitions found on MTD device 13010000.spi.0
[ 1.578264] Creating 4 MTD partitions on "13010000.spi.0":
[ 1.584319] 0x000000000000-0x000000080000 : "spl"
[ 1.591715] 0x0000000f0000-0x000000100000 : "uboot-env"
[ 1.599448] 0x000000100000-0x000000500000 : "uboot"
[ 1.606774] 0x000000600000-0x000001000000 : "reserved-data"
[ 1.620530] starfive-rtc 17040000.rtc: registered as rtc0
[ 1.626535] starfive-rtc 17040000.rtc: setting system clock to 2001-01-01T00:00:00 UTC (978307200)
[ 1.636529] i2c_dev: i2c /dev entries driver
[ 1.644096] sdhci: Secure Digital Host Controller Interface driver
[ 1.650924] sdhci: Copyright(c) Pierre Ossman
[ 1.655780] Synopsys Designware Multimedia Card Interface Driver
[ 1.662707] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.669650] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.677187] clocksource: jh7110-timer.ch0: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
[ 1.688460] clocksource: jh7110-timer.ch1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
[ 1.699716] clocksource: jh7110-timer.ch2: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
[ 1.710969] clocksource: jh7110-timer.ch3: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
[ 1.722287] hid: raw HID events driver (C) Jiri Kosina
[ 1.728250] usbcore: registered new interface driver usbhid
[ 1.734417] usbhid: USB HID core driver
[ 1.738930] SPI driver sensorhub has no spi_device_id for samsung,sensorhub-rinato
[ 1.747295] SPI driver sensorhub has no spi_device_id for samsung,sensorhub-thermostat
[ 1.756337] riscv-pmu-sbi: SBI PMU extension is available
[ 1.762324] riscv-pmu-sbi: 16 firmware and 4 hardware counters
[ 1.768758] riscv-pmu-sbi: Perf sampling/filtering is not supported as sscof extension is not available
[ 1.788929] Initializing XFRM netlink socket
[ 1.793979] NET: Registered PF_INET6 protocol family
[ 1.838884] Segment Routing with IPv6
[ 1.842970] RPL Segment Routing with IPv6
[ 1.847455] In-situ OAM (IOAM) with IPv6
[ 1.852033] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[ 1.860043] NET: Registered PF_PACKET protocol family
[ 1.865639] NET: Registered PF_KEY protocol family
[ 1.871210] Key type dns_resolver registered
[ 1.900275] registered taskstats version 1
[ 1.905130] Loading compiled-in X.509 certificates
[ 1.932908] Loaded X.509 cert 'Build time autogenerated kernel key: 4c3549a9ff5df31a134a9c5f9ba227c32fc91e91'
[ 1.961409] zswap: loaded using pool zstd/zsmalloc
[ 1.982630] Key type .fscrypt registered
[ 1.986992] Key type fscrypt-provisioning registered
[ 1.995588] Btrfs loaded, zoned=yes, fsverity=no
[ 2.000835] AppArmor: AppArmor sha1 policy hashing enabled
[ 2.039741] @@ dev ptr:ffffffd8c0173c00/1500/1
[ 2.045083] PVR_K: 1: Read BVNC 36.50.54.182 from HW device registers
[ 2.052334] PVR_K: 1: RGX Device registered BVNC 36.50.54.182 with 1 core in the system
[ 2.067668] PVR_K: 1: RGX Firmware image 'rgx.fw.36.50.54.182' loaded
[ 2.079703] PVR_K: 1: Shader binary image 'rgx.sh.36.50.54.182' loaded
[ 2.090389] [drm] Initialized pvr 1.19.6345021 20170530 for 18000000.gpu on minor 0
[ 2.099401] mailbox 13060000.mailbox: Mailbox enabled
[ 2.105548] pl08xdmac 16008000.dma-controller: initialized 8 virtual memcpy channels
[ 2.114140] pl08xdmac 16008000.dma-controller: initialized 16 virtual slave channels
[ 2.124736] debugfs: Directory '16008000.dma-controller' with parent 'dmaengine' already present!
[ 2.134606] pl08xdmac 16008000.dma-controller: DMA: PL080 rev0 at 0x16008000 irq 29
[ 2.143942] gpio gpiochip0: Static allocation of GPIO base is deprecated, use dynamic allocation.
[ 2.154178] starfive-jh7110-sys-pinctrl 13040000.pinctrl: StarFive GPIO chip registered 64 GPIOs
[ 2.165148] gpio gpiochip1: Static allocation of GPIO base is deprecated, use dynamic allocation.
[ 2.175270] starfive-jh7110-aon-pinctrl 17020000.pinctrl: StarFive GPIO chip registered 4 GPIOs
[ 2.185826] pcie-starfive 940000000.pcie: host bridge /soc/pcie@940000000 ranges:
[ 2.194133] pcie-starfive 940000000.pcie: MEM 0x0030000000..0x0037ffffff -> 0x0030000000
[ 2.203553] pcie-starfive 940000000.pcie: MEM 0x0900000000..0x093fffffff -> 0x0900000000
[ 2.422044] pcie-starfive 940000000.pcie: port link up
[ 2.429218] pcie-starfive 940000000.pcie: PCI host bridge to bus 0000:00
[ 2.436627] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 2.442689] pci_bus 0000:00: root bus resource [mem 0x30000000-0x37ffffff]
[ 2.450279] pci_bus 0000:00: root bus resource [mem 0x900000000-0x93fffffff pref]
[ 2.458567] pci 0000:00:00.0: [1556:1111] type 01 class 0x060400
[ 2.465271] pci 0000:00:00.0: supports D1 D2
[ 2.469996] pci 0000:00:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 2.480945] pci 0000:01:00.0: [1106:3483] type 00 class 0x0c0330
[ 2.487604] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
[ 2.495185] pci 0000:01:00.0: PME# supported from D0 D3cold
[ 2.501582] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[ 2.508905] pci 0000:00:00.0: BAR 8: assigned [mem 0x30000000-0x300fffff]
[ 2.516404] pci 0000:01:00.0: BAR 0: assigned [mem 0x30000000-0x30000fff 64bit]
[ 2.524485] pci 0000:00:00.0: PCI bridge to [bus 01]
[ 2.529973] pci 0000:00:00.0: bridge window [mem 0x30000000-0x300fffff]
[ 2.537541] pci 0000:01:00.0: enabling device (0000 -> 0002)
[ 2.544101] xhci_hcd 0000:01:00.0: xHCI Host Controller
[ 2.549921] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1
[ 2.558457] xhci_hcd 0000:01:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x0000000000000890
[ 2.569201] xhci_hcd 0000:01:00.0: xHCI Host Controller
[ 2.575023] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2
[ 2.583209] xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed
[ 2.591125] hub 1-0:1.0: USB hub found
[ 2.595319] hub 1-0:1.0: 1 port detected
[ 2.601151] hub 2-0:1.0: USB hub found
[ 2.605361] hub 2-0:1.0: 4 ports detected
[ 2.611332] pcie-starfive 9c0000000.pcie: host bridge /soc/pcie@9c0000000 ranges:
[ 2.619639] pcie-starfive 9c0000000.pcie: MEM 0x0038000000..0x003fffffff -> 0x0038000000
[ 2.629160] pcie-starfive 9c0000000.pcie: MEM 0x0980000000..0x09bfffffff -> 0x0980000000
[ 2.851043] usb 1-1: new high-speed USB device number 2 using xhci_hcd
[ 2.991799] hub 1-1:1.0: USB hub found
[ 2.996165] hub 1-1:1.0: 4 ports detected
[ 3.103418] usb 2-1: new SuperSpeed USB device number 2 using xhci_hcd
[ 3.132525] hub 2-1:1.0: USB hub found
[ 3.137533] hub 2-1:1.0: 4 ports detected
[ 3.279046] usb 1-1.1: new high-speed USB device number 3 using xhci_hcd
[ 3.367452] hub 1-1.1:1.0: USB hub found
[ 3.372112] hub 1-1.1:1.0: 4 ports detected
[ 3.435759] usb 2-1.1: new SuperSpeed USB device number 3 using xhci_hcd
[ 3.679046] usb 1-1.1.3: new low-speed USB device number 4 using xhci_hcd
[ 3.804169] input: PixArt USB Optical Mouse as /devices/platform/soc/940000000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.1/1-1.1.3/1-1.1.3:1.0/0003:093A:2510.0001/input/input0
[ 3.822885] hid-generic 0003:093A:2510.0001: input,hidraw0: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-0000:01:00.0-1.1.3/input0
[ 3.847437] pcie-starfive 9c0000000.pcie: port link down
[ 3.854669] pcie-starfive 9c0000000.pcie: PCI host bridge to bus 0001:00
[ 3.862077] pci_bus 0001:00: root bus resource [bus 00-ff]
[ 3.868139] pci_bus 0001:00: root bus resource [mem 0x38000000-0x3fffffff]
[ 3.875729] pci_bus 0001:00: root bus resource [mem 0x980000000-0x9bfffffff pref]
[ 3.884049] pci 0001:00:00.0: [1556:1111] type 01 class 0x060400
[ 3.890766] pci 0001:00:00.0: supports D1 D2
[ 3.895489] pci 0001:00:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 3.906667] pci_bus 0001:01: busn_res: [bus 01-ff] end is updated to 01
[ 3.913989] pci 0001:00:00.0: PCI bridge to [bus 01]
[ 3.925058] usb 1-1.1.4: new low-speed USB device number 5 using xhci_hcd
[ 3.926576] dw_axi_dmac_platform 16050000.dma-controller: DesignWare AXI DMA Controller, 4 channels
[ 3.943704] printk: console [ttyS0] disabled
[ 3.969102] 10000000.serial: ttyS0 at MMIO 0x10000000 (irq = 58, base_baud = 1500000) is a 16550A
[ 3.978957] printk: console [ttyS0] enabled
[ 3.978957] printk: console [ttyS0] enabled
[ 3.987864] printk: bootconsole [uart0] disabled
[ 3.987864] printk: bootconsole [uart0] disabled
[ 4.004817] dwmmc_starfive 16020000.mmc: IDMAC supports 32-bit address mode.
[ 4.004912] jh7110-crypto 16000000.crypto: will run requests pump with realtime priority
[ 4.011924] dwmmc_starfive 16020000.mmc: Using internal DMA controller.
[ 4.020455] mailbox_test mailbox_client: invalid resource (null)
[ 4.026774] dwmmc_starfive 16020000.mmc: Version ID is 290a
[ 4.032706] mailbox_test mailbox_client: invalid resource (null)
[ 4.038342] dwmmc_starfive 16020000.mmc: DW MMC controller at irq 62,32 bit host data width,32 deep fifo
[ 4.044398] mailbox_test mailbox_client: Successfully registered
[ 4.054144] mmc_host mmc1: card is polling.
[ 4.061315] ssp-pl022 10060000.spi: ARM PL022 driver, device ID: 0x00041022
[ 4.071238] ssp-pl022 10060000.spi: mapped registers from 0x0000000010060000 to 0000000030bd9e59
[ 4.077456] input: SEM USB Keyboard as /devices/platform/soc/940000000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.1/1-1.1.4/1-1.1.4:1.0/0003:1A2C:5014.0002/input/input1
[ 4.081136] ssp-pl022 10060000.spi: will use autosuspend for runtime pm, delay 100ms
[ 4.105826] seeed_panel 2-0045: Unknown Atmel firmware revision: 0x00
[ 4.113288] starfive_jadard 2-0019: no 4lane connect!!!!
[ 4.119794] axp20x-i2c 5-0036: AXP20x variant AXP15060 found
[ 4.129386] axp20x-i2c 5-0036: AXP20X driver loaded
[ 4.136588] starfive-dphy-rx 19820000.phy: supply mipi_0p9 not found, using dummy regulator
[ 4.145501] sf-mipi-dphy-tx 295e0000.mipi-dphy: sf_dphy_probe begin
[ 4.148628] hid-generic 0003:1A2C:5014.0002: input,hidraw1: USB HID v1.10 Keyboard [SEM USB Keyboard] on usb-0000:01:00.0-1.1.4/input0
[ 4.151796] sf-mipi-dphy-tx 295e0000.mipi-dphy: ===> sf_dphy_probe enter, 442
[ 4.151991] sf-mipi-dphy-tx 295e0000.mipi-dphy: control ECO
[ 4.169313] input: SEM USB Keyboard Consumer Control as /devices/platform/soc/940000000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.1/1-1.1.4/1-1.1.4:1.1/0003:1A2C:5014.0003/input/input2
[ 4.171173] sf-mipi-dphy-tx 295e0000.mipi-dphy: supply mipi_1p8 not found, using dummy regulator
[ 4.203528] sf-mipi-dphy-tx 295e0000.mipi-dphy: sf_dphy_probe end
[ 4.209903] cdns-dsi 295d0000.mipi: dsi_sys_clk = 297000000
[ 4.215877] cdns-dsi 295d0000.mipi: starfive dsi bind end
[ 4.225306] dwmmc_starfive 16010000.mmc: IDMAC supports 32-bit address mode.
[ 4.227388] jh7110-vin 19800000.vin_sysctl: stfcamss probe enter!
[ 4.232420] dwmmc_starfive 16010000.mmc: Using internal DMA controller.
[ 4.238585] input: SEM USB Keyboard System Control as /devices/platform/soc/940000000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.1/1-1.1.4/1-1.1.4:1.1/0003:1A2C:5014.0003/input/input3
[ 4.245126] dwmmc_starfive 16010000.mmc: Version ID is 290a
[ 4.245562] ------------[ cut here ]------------
[ 4.245566] WARNING: CPU: 2 PID: 1 at drivers/reset/core.c:766 __reset_control_get_internal+0xd4/0x11c
[ 4.245582] Modules linked in:
[ 4.245588] CPU: 2 PID: 1 Comm: swapper/0 Not tainted 6.6.20-cwt-5.12.0-3 #1
[ 4.245594] Hardware name: StarFive VisionFive 2 v1.3B (DT)
[ 4.245597] epc : __reset_control_get_internal+0xd4/0x11c
[ 4.245602] ra : __of_reset_control_get+0x10e/0x172
[ 4.245607] epc : ffffffff805f61fc ra : ffffffff805f6352 sp : ffffffc8000238f0
[ 4.245611] gp : ffffffff819298b0 tp : ffffffd8c0093fc0 t0 : 0000000000000000
[ 4.245615] t1 : 0000000000000000 t2 : 0000000000000006 s0 : ffffffc800023940
[ 4.245618] s1 : ffffffd8c4903640 a0 : ffffffd8c0caa940 a1 : 0000000000000002
[ 4.245622] a2 : 0000000000000001 a3 : 0000000000000000 a4 : 0000000000000001
[ 4.245625] a5 : 0000000000000000 a6 : 000000000000000a a7 : 0000000000000412
[ 4.245628] s2 : 0000000000000002 s3 : ffffffd8c0caa960 s4 : ffffffd8c0caa940
[ 4.245631] s5 : 0000000000000000 s6 : 0000000000000001 s7 : 0000000000000000
[ 4.245634] s8 : ffffffd8c0175c10 s9 : fffffffffffff000 s10: 0000000000000000
[ 4.245638] s11: 0000000000000000 t3 : ffffffffffffffff t4 : ffffffffffffffff
[ 4.245641] t5 : ffffffff81601598 t6 : 000000000000005a
[ 4.245644] status: 0000000200000120 badaddr: 0000000000000000 cause: 0000000000000003
[ 4.245648] [<ffffffff805f61fc>] __reset_control_get_internal+0xd4/0x11c
[ 4.245654] [<ffffffff805f6352>] __of_reset_control_get+0x10e/0x172
[ 4.245659] [<ffffffff805f63ea>] __reset_control_get+0x34/0x18a
[ 4.245665] [<ffffffff805f6ca6>] __reset_control_bulk_get+0x4a/0xdc
[ 4.245671] [<ffffffff805f6d92>] __devm_reset_control_bulk_get+0x5a/0x9a
[ 4.245676] [<ffffffff80b8a068>] stfcamss_probe+0x2c6/0xfd2
[ 4.245683] [<ffffffff8070db8e>] platform_probe+0x52/0xb6
[ 4.245691] [<ffffffff8070b6ac>] really_probe+0x84/0x234
[ 4.245699] [<ffffffff8070b8b8>] __driver_probe_device+0x5c/0xdc
[ 4.245706] [<ffffffff8070b964>] driver_probe_device+0x2c/0xb2
[ 4.245712] [<ffffffff8070bae4>] __driver_attach+0x6c/0x11a
[ 4.245719] [<ffffffff80709890>] bus_for_each_dev+0x58/0xa6
[ 4.245726] [<ffffffff8070b0fe>] driver_attach+0x1a/0x22
[ 4.245732] [<ffffffff8070aa6a>] bus_add_driver+0xd0/0x1ba
[ 4.245738] [<ffffffff8070c78e>] driver_register+0x40/0xda
[ 4.245745] [<ffffffff8070d934>] __platform_driver_register+0x1e/0x26
[ 4.245750] [<ffffffff80c2e6ae>] stfcamss_init+0x1a/0x22
[ 4.245757] [<ffffffff800020ee>] do_one_initcall+0x36/0x1fa
[ 4.245763] [<ffffffff80c014ba>] kernel_init_freeable+0x21e/0x286
[ 4.245771] [<ffffffff80b8edda>] kernel_init+0x26/0x11a
[ 4.245779] [<ffffffff80b974b2>] ret_from_fork+0xe/0x1c
[ 4.245785] ---[ end trace 0000000000000000 ]---
[ 4.245792] [st_camss] error: Failed to get reset controls
[ 4.245809] jh7110-vin: probe of 19800000.vin_sysctl failed with error -16
[ 4.246083] of_cfs_init
[ 4.246121] of_cfs_init: OK
[ 4.262616] hid-generic 0003:1A2C:5014.0003: input,hidraw2: USB HID v1.10 Device [SEM USB Keyboard] on usb-0000:01:00.0-1.1.4/input1
[ 4.268101] dwmmc_starfive 16010000.mmc: DW MMC controller at irq 85,32 bit host data width,32 deep fifo
[ 4.292137] mmc_host mmc1: Bus speed (slot 0) = 49500000Hz (slot req 400000Hz, actual 399193HZ div = 62)
[ 4.298033] mmc_host mmc0: card is non-removable.
[ 4.540806] mmc_host mmc1: Bus speed (slot 0) = 49500000Hz (slot req 50000000Hz, actual 49500000HZ div = 0)
[ 4.582667] mmc1: new high speed SDHC card at address 59b4
[ 4.589151] mmcblk1: mmc1:59b4 29.8 GiB
[ 4.601163] mmcblk1: p1 p2 p3 p4
[ 4.774099] mmc_host mmc0: Bus speed (slot 0) = 49500000Hz (slot req 400000Hz, actual 399193HZ div = 62)
[ 4.990828] clk: Disabling unused clocks
[ 5.001995] starfive display-subsystem: bound 29400000.dc8200 (ops 0xffffffff8110e6e8)
[ 5.009972] innohdmi-starfive 29590000.hdmi: inno hdmi bind begin
[ 5.016855] innohdmi-starfive 29590000.hdmi: [drm:inno_hdmi_bind] registered Inno HDMI I2C bus driver success
[ 5.027098] innohdmi-starfive 29590000.hdmi: HDMI&AUDIO register done.
[ 5.033678] innohdmi-starfive 29590000.hdmi: inno hdmi bind end
[ 5.039630] starfive display-subsystem: bound 29590000.hdmi (ops 0xffffffff811103a8)
[ 5.047426] vs-simple-encoder dsi-output: encoder_bind begin
[ 5.053146] no panel, -517
[ 5.055868] vs-simple-encoder dsi-output: encoder_bind error
[ 5.061536] starfive display-subsystem: bound dsi-output (ops 0xffffffff8110fef0)
[ 5.069580] [drm] Initialized starfive 1.0.0 20191101 for display-subsystem on minor 1
[ 5.144804] innohdmi-starfive 29590000.hdmi: inno_hdmi_phy_clk_set_rate rate 148500000 tmdsclk 148500000
[ 5.144825] innohdmi-starfive 29590000.hdmi: inno_hdmi_phy_clk_set_rate hdmi->pre_cfg->pixclock = 148500000
[ 5.178829] Console: switching to colour frame buffer device 240x67
[ 5.250686] starfive display-subsystem: [drm] fb0: starfivedrmfb frame buffer device
[ 5.258918] ALSA device list:
[ 5.261962] #0: Starfive-PWMDAC-Sound-Card
[ 5.268070] Freeing unused kernel image (initmem) memory: 2216K
[ 5.274138] Run /init as init process
[ 5.278083] mmc_host mmc0: Bus speed (slot 0) = 49500000Hz (slot req 300000Hz, actual 298192HZ div = 83)
:: running early hook [udev]
Starting systemd-udevd version 255.7-1-arch
:: running hook [udev]
:: Triggering uevents...
[ 5.734042] mmc_host mmc0: Bus speed (slot 0) = 49500000Hz (slot req 200000Hz, actual 199596HZ div = 124)
[ 6.126587] Error: Driver 'cdns-dsi' is already registered, aborting...
[ 6.190089] mmc_host mmc0: Bus speed (slot 0) = 49500000Hz (slot req 100000Hz, actual 99798HZ div = 248)
[ 6.324435] BTRFS: device label VF2 devid 1 transid 155 /dev/mmcblk1p4 scanned by (udev-worker) (150)
:: running hook [keymap]
:: Loading keymap...kbd_mode: KDSKBMODE: Inappropriate ioctl for device
done.
:: running hook [consolefont]
:: Loading console font...Couldn't open /dev/console
done.
:: performing fsck on 'LABEL=VF2'
:: mounting 'LABEL=VF2' on real root
[ 6.452900] mmc0: Failed to initialize a non-removable card
[ 6.554309] BTRFS info (device mmcblk1p4): first mount of filesystem ebae72a8-818f-49fd-81fe-b9773a145b9c
[ 6.570116] BTRFS info (device mmcblk1p4): using xxhash64 (xxhash64-generic) checksum algorithm
[ 6.580157] BTRFS info (device mmcblk1p4): turning on async discard
[ 6.586693] BTRFS info (device mmcblk1p4): use lzo compression, level 0
[ 6.593420] BTRFS info (device mmcblk1p4): using free space tree
[ 6.627643] BTRFS info (device mmcblk1p4): enabling ssd optimizations
:: running cleanup hook [udev]
[ 7.556445] systemd[1]: System time before build time, advancing clock.
[ 7.715164] systemd[1]: systemd 255.7-1-arch running in system mode (+PAM +AUDIT -SELINUX -APPARMOR -IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK +XKBCOMMON +UTMP -SYSVINIT default-hierarchy=unified)
[ 7.748204] systemd[1]: Detected architecture riscv64.
Welcome to Arch Linux!
[ 7.823671] systemd[1]: memfd_create() called without MFD_EXEC or MFD_NOEXEC_SEAL set
[ 8.091810] systemd[1]: bpf-lsm: BPF LSM hook not enabled in the kernel, BPF LSM not supported
[ 8.448397] zram: Added device: zram0
[ 8.964101] systemd[1]: Queued start job for default target Graphical Interface.
[ 8.979776] systemd[1]: Created slice Slice /system/dirmngr.
[ OK ] Created slice Slice /system/dirmngr.
[ 8.998421] systemd[1]: Created slice Slice /system/getty.
[ OK ] Created slice Slice /system/getty.
[ 9.016635] systemd[1]: Created slice Slice /system/gpg-agent.
[ OK ] Created slice Slice /system/gpg-agent.
[ 9.034173] systemd[1]: Created slice Slice /system/gpg-agent-browser.
[ OK ] Created slice Slice /system/gpg-agent-browser.
[ 9.054624] systemd[1]: Created slice Slice /system/gpg-agent-extra.
[ OK ] Created slice Slice /system/gpg-agent-extra.
[ 9.076243] systemd[1]: Created slice Slice /system/gpg-agent-ssh.
[ OK ] Created slice Slice /system/gpg-agent-ssh.
[ 9.096384] systemd[1]: Created slice Slice /system/keyboxd.
[ OK ] Created slice Slice /system/keyboxd.
[ 9.114519] systemd[1]: Created slice Slice /system/modprobe.
[ OK ] Created slice Slice /system/modprobe.
[ 9.131300] systemd[1]: Created slice Slice /system/serial-getty.
[ OK ] Created slice Slice /system/serial-getty.
[ 9.149861] systemd[1]: Created slice Slice /system/systemd-fsck.
[ OK ] Created slice Slice /system/systemd-fsck.
[ 9.169491] systemd[1]: Created slice Slice /system/systemd-zram-setup.
[ OK ] Created slice Slice /system/systemd-zram-setup.
[ 9.192119] systemd[1]: Created slice User and Session Slice.
[ OK ] Created slice User and Session Slice.
[ 9.208496] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ OK ] Started Dispatch Password Requests to Console Directory Watch.
[ 9.230420] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ OK ] Started Forward Password Requests to Wall Directory Watch.
[ 9.249514] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ OK ] Set up automount Arbitrary Executa…ormats File System Automount Point.
[ 9.277930] systemd[1]: Expecting device /dev/disk/by-label/EFI...
Expecting device /dev/disk/by-label/EFI...
[ 9.296529] systemd[1]: Expecting device /dev/disk/by-label/VF2...
Expecting device /dev/disk/by-label/VF2...
[ 9.322745] systemd[1]: Expecting device /dev/ttyS0...
Expecting device /dev/ttyS0...
[ 9.345243] systemd[1]: Expecting device /dev/zram0...
Expecting device /dev/zram0...
[ 9.365820] systemd[1]: Reached target Local Encrypted Volumes.
[ OK ] Reached target Local Encrypted Volumes.
[ 9.388056] systemd[1]: Reached target Local Integrity Protected Volumes.
[ OK ] Reached target Local Integrity Protected Volumes.
[ 9.410284] systemd[1]: Reached target Path Units.
[ OK ] Reached target Path Units.
[ 9.431977] systemd[1]: Reached target Remote File Systems.
[ OK ] Reached target Remote File Systems.
[ 9.454054] systemd[1]: Reached target Slice Units.
[ OK ] Reached target Slice Units.
[ 9.473217] systemd[1]: Reached target Local Verity Protected Volumes.
[ OK ] Reached target Local Verity Protected Volumes.
[ 9.494060] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ OK ] Listening on Device-mapper event daemon FIFOs.
[ 9.544319] systemd[1]: Listening on Process Core Dump Socket.
[ OK ] Listening on Process Core Dump Socket.
[ 9.567355] systemd[1]: Listening on Journal Socket (/dev/log).
[ OK ] Listening on Journal Socket (/dev/log).
[ 9.587968] systemd[1]: Listening on Journal Socket.
[ OK ] Listening on Journal Socket.
[ 9.607340] systemd[1]: TPM2 PCR Extension (Varlink) was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[ 9.627051] systemd[1]: Listening on udev Control Socket.
[ OK ] Listening on udev Control Socket.
[ 9.653624] systemd[1]: Listening on udev Kernel Socket.
[ OK ] Listening on udev Kernel Socket.
[ 9.675617] systemd[1]: Listening on User Database Manager Socket.
[ OK ] Listening on User Database Manager Socket.
[ 9.714555] systemd[1]: Mounting Huge Pages File System...
Mounting Huge Pages File System...
[ 9.742550] systemd[1]: Mounting POSIX Message Queue File System...
Mounting POSIX Message Queue File System...
[ 9.769494] systemd[1]: Mounting Kernel Debug File System...
Mounting Kernel Debug File System...
[ 9.789413] systemd[1]: Kernel Trace File System was skipped because of an unmet condition check (ConditionPathExists=/sys/kernel/tracing).
[ 9.809672] systemd[1]: Starting Load AppArmor profiles...
Starting Load AppArmor profiles...
[ 9.837350] systemd[1]: Starting Create List of Static Device Nodes...
Starting Create List of Static Device Nodes...
[ 9.872538] systemd[1]: Starting Load Kernel Module configfs...
Starting Load Kernel Module configfs...
[ 9.895277] systemd[1]: Starting Load Kernel Module dm_mod...
Starting Load Kernel Module dm_mod...
[ 9.919497] systemd[1]: Starting Load Kernel Module drm...
Starting Load Kernel Module drm...
[ 9.942745] systemd[1]: Starting Load Kernel Module fuse...
Starting Load Kernel Module fuse...
[ 9.959699] systemd[1]: Starting Load Kernel Module loop...
Starting Load Kernel Module loop...
[ 9.981172] systemd[1]: File System Check on Root Device was skipped because of an unmet condition check (ConditionPathIsReadWrite=!/).
[ 10.012122] systemd[1]: Starting Journal Service...
Starting Journal Service...
[ 10.059445] systemd[1]: Starting Load Kernel Modules...
[ 10.063587] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com
Startin[ 10.082463] systemd[1]: TPM2 PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
g Load Kernel Modules...
[ 10.118860] systemd[1]: Starting Remount Root and Kernel File Systems...
Starting Remount Root and Kernel File Systems...
[ 10.145476] systemd[1]: TPM2 SRK Setup (Early) was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[ 10.181224] systemd-journald[231]: Collecting audit messages is disabled.
[ 10.187915] systemd[1]: Starting Coldplug All udev Devices...
Starting Coldplug All udev Devices...
[ 10.239834] systemd[1]: Mounted Huge Pages File System.
[ OK ] Mounted Huge Pages File System.
[ 10.278835] systemd[1]: Mounted POSIX Message Queue File System.
[ OK ] Mounted POSIX Message Queue File System.
[ 10.317777] systemd[1]: Mounted Kernel Debug File System.
[ OK ] Mounted Kernel Debug File System.
[ 10.351274] systemd[1]: Finished Create List of Static Device Nodes.
[ OK ] Finished Create List of Static Device Nodes.
[ 10.386880] systemd[1]: Started Journal Service.
[ OK ] Started Journal Service.
[ OK ] Finished Load Kernel Module configfs.
[ OK ] Finished Load Kernel Module dm_mod.
[ OK ] Finished Load Kernel Module drm.
[ OK ] Finished Load Kernel Module fuse.
[ OK ] Finished Load Kernel Module loop.
[ OK ] Finished Load Kernel Modules.
[ OK ] Finished Remount Root and Kernel File Systems.
[ 10.525590] audit: type=1400 audit(1716916720.968:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=236 comm="apparmor_parser"
Mounting FUSE Control File System...
[ 10.567136] audit: type=1400 audit(1716916720.973:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=236 comm="apparmor_parser"
Mounting Kernel Configuration File System...
Starting Load/Save OS Random Seed...
Starting Apply Kernel Variables...
Starting Create Static Device Nodes in /dev gracefully...
[ OK ] Mounted FUSE Control File System.
[ OK ] Mounted Kernel Configuration File System.
[ OK ] Finished Load/Save OS Random Seed.
[ 10.750677] audit: type=1400 audit(1716916721.193:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="php-fpm" pid=237 comm="apparmor_parser"
Starting User Database Manager...
[ OK ] Finished 10.809697] audit: type=1400 audit(1716916721.252:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=235 comm="apparmor_parser"
;1;39mApply Kernel Variables.
[ OK ] Started User Database Manager.
[ OK ] Finished Create Static Device Nodes in /dev gracefully.
Starting Create Static Device Nodes in /dev...
[ 11.141850] audit: type=1400 audit(1716916721.584:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="samba-bgqd" pid=253 comm="apparmor_parser"
[ 11.184973] audit: type=1400 audit(1716916721.627:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="samba-dcerpcd" pid=266 comm="apparmor_parser"
[ 11.216055] audit: type=1400 audit(1716916721.633:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ping" pid=233 comm="apparmor_parser"
[ 11.299566] audit: type=1400 audit(1716916721.742:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="samba-rpcd" pid=268 comm="apparmor_parser"
[ OK ] Finished Create Static Device Nodes in /dev.
[ OK ] Reached target Preparation for Local File Systems.
Starting Rule-based Manager for Device Events and Files...
[ 11.443030] audit: type=1400 audit(1716916721.885:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="klogd" pid=279 comm="apparmor_parser"
[ OK ] Finished Coldplug All udev Devices.
[ 11.584227] audit: type=1400 audit(1716916722.027:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="samba-rpcd-classic" pid=276 comm="apparmor_parser"
[ OK ] Started Rule-based Manager for Device Events and Files.
[ OK ] Found device /dev/zram0.
Starting Create swap on /dev/zram0...
[ 12.115099] zram0: detected capacity change from 0 to 8079360
[ OK ] Found device /dev/ttyS0.
[ OK ] Finished Create swap on /dev/zram0.
Activating swap Compressed Swap on /dev/zram0...
[ 12.392802] Adding 4039676k swap on /dev/zram0. Priority:100 extents:1 across:4039676k SSDsc
[ OK ] Activated swap Compressed Swap on /dev/zram0.
[ OK ] Reached target Swaps.
Mounting /tmp...
Mounting /var/tmp...
[ OK ] Mounted /tmp.
[ OK ] Mounted /var/tmp.
[ OK ] Found device /dev/disk/by-label/EFI.
Starting File System Check on /dev/disk/by-label/EFI...
[ OK ] Found device /dev/disk/by-label/VF2.
[ OK ] Finished File System Check on /dev/disk/by-label/EFI.
[ 13.814602] Goodix-TS 2-0014: supply AVDD28 not found, using dummy regulator
[ 13.837150] Goodix-TS 2-0014: supply VDDIO not found, using dummy regulator
[ 13.988299] Goodix-TS 2-0014: Error reading 1 bytes from 0x8140: -121
[ OK ] Reached target Sound Card.
[ 14.112290] ov4689 6-0036: supply DOVDD not found, using dummy regulator
[ 14.135920] Goodix-TS 2-0014: Error reading 1 bytes from 0x8140: -121
Mounting /boot...
Starting File System Check on /dev/disk/by-label/VF2...
[ 14.214827] imx219 6-0010: supply VANA not found, using dummy regulator
[ 14.254248] ov4689 6-0036: supply AVDD not found, using dummy regulator
[ OK ] Finished File System Check on /dev/disk/by-label/VF2.
[ 14.310052] Goodix-TS 2-0014: I2C communication failure: -121
[ 14.321252] imx219 6-0010: supply VDIG not found, using dummy regulator
Mounting /.snapshots...
[ 14.342449] ov4689 6-0036: supply DVDD not found, using dummy regulator
[ 14.367239] imx219 6-0010: supply VDDL not found, using dummy regulator
Mounting /home...
[ 14.403181] Goodix-TS: probe of 2-0014 failed with error -121
Mounting /var/cache/pacman/pkg...
[ 14.463464] ov4689 6-0036: ov4689_read_reg: error: reg=300a
[ 14.485745] ov4689 6-0036: ov4689_check_chip_id: failed to read chip identifier
[ 14.512320] imx219 6-0010: failed to read chip id 219
Mounting /var/log...
[ OK ] Mounted /boot.
[ 14.625337] ov4689: probe of 6-0036 failed with error -121
[ 14.634108] imx708 6-001a: supply VANA1 not found, using dummy regulator
[ OK ] Mounted /.snapshots.
[ OK ] Mounted 14.663858] imx219: probe of 6-0010 failed with error -5
1;39m/home.
[ OK ] Mounted /var/cache/pacman/pkg.
[ OK ] Mounted /var/log.
[ OK ] Reached target Local File Systems.
[ OK ] Listening on System Extension Image Management (Varlink).
Starting Flush Journal to Persistent Storage...
[ 14.762261] input: axp20x-pek as /devices/platform/soc/12050000.i2c/i2c-5/5-0036/axp221-pek/input/input4
[ 14.817942] systemd-journald[231]: Received client request to flush runtime journal.
[ 14.883081] pps_core: LinuxPPS API ver. 1 registered
[ 14.909644] imx708 6-001a: supply VANA2 not found, using dummy regulator
[ 14.922382] mousedev: PS/2 mouse device common for all mice
[ 14.935604] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 14.987190] imx708 6-001a: supply VDIG not found, using dummy regulator
[ 15.017767] imx708 6-001a: supply VDDL not found, using dummy regulator
[ 15.055210] imx708 6-001a: failed to read chip id 708, with error -5
[ 15.086474] systemd-journald[231]: /var/log/journal/72144a64db6f4720ade5ccd1e3c98c82/system.journal: Realtime clock jumped backwards relative to last journal entry, rotating.
[ 15.108548] Error: Driver 'cdns-dsi' is already registered, aborting...
[ 15.110253] imx708: probe of 6-001a failed with error -5
[ 15.119695] systemd-journald[231]: Rotating system journal.
[ 15.155428] usbcore: registered new device driver onboard-usb-hub
[ 15.201528] usb 1-1.1.3: USB disconnect, device number 4
[ 15.226858] PTP clock support registered
[ OK ] Reached target Hardware activated USB gadget.
Starting Virtual Console Setup...
[ 15.616430] kauditd_printk_skb: 28 callbacks suppressed
[ 15.616440] audit: type=1400 audit(1716916726.059:40): apparmor="STATUS" operation="profile_load" profile="unconfined" name="dovecot-script-login" pid=369 comm="apparmor_parser"
[ OK ] Finished Flush Journal to Persistent Storage.
Starting Create Volatile Files and Directories...
[ OK ] Stopped Virtual Console Setup.
[ 15.748080] usb 1-1.1.4: USB disconnect, device number 5
Starting Virtual Console Setup...
[ 16.001853] usbcore: registered new interface driver cdc_ether
[ 16.052886] audit: type=1400 audit(1716916726.489:41): apparmor="STATUS" operation="profile_load" profile="unconfined" name="avahi-daemon" pid=385 comm="apparmor_parser"
[ 16.183387] starfive-dwmac 16030000.ethernet: User ID: 0x41, Synopsys ID: 0x52
[ OK ] Finished Virtual Console Setup.
[ 16.209120] starfive-dwmac 16030000.ethernet: DWMAC4/5
[ 16.239280] starfive-dwmac 16030000.ethernet: DMA HW capability register supported
[ 16.273041] starfive-dwmac 16030000.ethernet: RX Checksum Offload Engine supported
[ 16.308075] starfive-dwmac 16030000.ethernet: Wake-Up On Lan supported
[ 16.344135] starfive-dwmac 16030000.ethernet: TSO supported
[ OK ] Finished Create Vol[ 16.367235] starfive-dwmac 16030000.ethernet: Enable RX Mitigation via HW Watchdog Timer
atile Files and [ 16.370576] cdc_ncm 2-1.1:2.0: MAC-Address: 20:7b:d2:29:52:e0
Directories.[ 16.376660] starfive-dwmac 16030000.ethernet: Enabled L3L4 Flow TC (entries=1)
[ 16.376673] starfive-dwmac 16030000.ethernet: Enabled RFS Flow TC (entries=10)
[ 16.376683] starfive-dwmac 16030000.ethernet: TSO feature enabled
[ 16.383392] audit: type=1400 audit(1716916726.826:42): apparmor="STATUS" operation="profile_load" profile="unconfined" name="dovecot" pid=394 comm="apparmor_parser"
[ 16.418064] cdc_ncm 2-1.1:2.0: setting rx_max = 16384
[ 16.434090] starfive-dwmac 16030000.ethernet: Using 40/40 bits DMA host/device width
[ 16.481170] cdc_ncm 2-1.1:2.0: setting tx_max = 16384
[ OK ] Started 16.510145] starfive-dwmac 16040000.ethernet: User ID: 0x41, Synopsys ID: 0x52
1;39mHardware RN[ 16.515627] hub 1-1.1:1.0: USB hub found
G Entropy Gatherer Daemon.
Startin[ 16.539650] cdc_ncm 2-1.1:2.0 eth1: register 'cdc_ncm' at usb-0000:01:00.0-1.1, CDC NCM (NO ZLP), 20:7b:d2:29:52:e0
g Record System Boot/Shutdown in UTMP...
[ 16.553291] starfive-dwmac 16040000.ethernet: DWMAC4/5
[ 16.575057] starfive-dwmac 16040000.ethernet: DMA HW capability register supported
[ 16.594645] usbcore: registered new interface driver cdc_ncm
[ 16.606071] hub 1-1.1:1.0: 4 ports detected
[ 16.627313] hub 1-1.1:1.0: USB hub found
[ 16.641049] starfive-dwmac 16040000.ethernet: RX Checksum Offload Engine supported
[ 16.647469] hub 1-1.1:1.0: 4 ports detected
[ OK ] Finished Record System Boot/Shutdown in UTMP.
[ 16.675033] starfive-dwmac 16040000.ethernet: Wake-Up On Lan supported
[ 16.692684] usbcore: registered new interface driver cdc_wdm
[ 16.738262] starfive-dwmac 16040000.ethernet: TSO supported
[ 16.785041] audit: type=1400 audit(1716916727.226:43): apparmor="STATUS" operation="profile_load" profile="unconfined" name="dnsmasq" pid=387 comm="apparmor_parser"
[ 16.789256] starfive-dwmac 16040000.ethernet: Enable RX Mitigation via HW Watchdog Timer
[ 16.811564] usbcore: registered new interface driver cdc_mbim
[ 16.837904] starfive-dwmac 16040000.ethernet: Enabled L3L4 Flow TC (entries=1)
[ 16.846044] audit: type=1400 audit(1716916727.228:44): apparmor="STATUS" operation="profile_load" profile="unconfined" name="dnsmasq//libvirt_leaseshelper" pid=387 comm="apparmor_parser"
[ 16.863445] starfive-dwmac 16040000.ethernet: Enabled RFS Flow TC (entries=10)
[ 16.876058] audit: type=1400 audit(1716916727.288:45): apparmor="STATUS" operation="profile_load" profile="unconfined" name="identd" pid=413 comm="apparmor_parser"
[ 16.893588] starfive-dwmac 16040000.ethernet: TSO feature enabled
[ 16.940584] audit: type=1400 audit(1716916727.383:46): apparmor="STATUS" operation="profile_load" profile="unconfined" name="mdnsd" pid=419 comm="apparmor_parser"
[ 16.944749] starfive-dwmac 16040000.ethernet: Using 40/40 bits DMA host/device width
[ 16.977145] cdc_ncm 2-1.1:2.0 enp1s0u1u1c2: renamed from eth1
[ 17.062766] starfive-dwmac 16040000.ethernet end1: renamed from eth1
[ 17.063039] usb 1-1.1.3: new low-speed USB device number 6 using xhci_hcd
[ 17.103400] starfive-dwmac 16030000.ethernet end0: renamed from eth0
[ 17.316838] input: PixArt USB Optical Mouse as /devices/platform/soc/940000000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.1/1-1.1.3/1-1.1.3:1.0/0003:093A:2510.0004/input/input5
[ 17.382273] hid-generic 0003:093A:2510.0004: input,hidraw0: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-0000:01:00.0-1.1.3/input0
[ 17.415639] audit: type=1400 audit(1716916727.853:47): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ntpd" pid=427 comm="apparmor_parser"
[ 17.531052] usb 1-1.1.4: new low-speed USB device number 7 using xhci_hcd
[ 17.577278] audit: type=1400 audit(1716916728.020:48): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nscd" pid=426 comm="apparmor_parser"
[ 17.634108] audit: type=1400 audit(1716916728.067:49): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nmbd" pid=425 comm="apparmor_parser"
[ 17.683704] input: SEM USB Keyboard as /devices/platform/soc/940000000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.1/1-1.1.4/1-1.1.4:1.0/0003:1A2C:5014.0005/input/input6
[ 17.777720] hid-generic 0003:1A2C:5014.0005: input,hidraw1: USB HID v1.10 Keyboard [SEM USB Keyboard] on usb-0000:01:00.0-1.1.4/input0
[ 17.992361] input: SEM USB Keyboard Consumer Control as /devices/platform/soc/940000000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.1/1-1.1.4/1-1.1.4:1.1/0003:1A2C:5014.0006/input/input7
[ 18.086430] input: SEM USB Keyboard System Control as /devices/platform/soc/940000000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.1/1-1.1.4/1-1.1.4:1.1/0003:1A2C:5014.0006/input/input8
[ 18.129524] hid-generic 0003:1A2C:5014.0006: input,hidraw2: USB HID v1.10 Device [SEM USB Keyboard] on usb-0000:01:00.0-1.1.4/input1
[ OK ] Finished Load AppArmor profiles.
[ OK ] Reached target System Initialization.
[ OK ] Started Refresh existing PGP keys of archlinux-keyring regularly.
[ OK ] Started Daily verification of password and group files.
[ OK ] Started Daily Cleanup of Temporary Directories.
[ OK ] Reached target Timer Units.
[ OK ] Listening on D-Bus System Message Bus Socket.
[ OK ] Listening on GnuPG network certifi…ent daemon for /etc/pacman.d/gnupg.
[ OK ] Listening on GnuPG cryptographic a… browsers) for /etc/pacman.d/gnupg.
[ OK ] Listening on GnuPG cryptographic a…estricted) for /etc/pacman.d/gnupg.
[ OK ] Listening on GnuPG cryptographic a…emulation) for /etc/pacman.d/gnupg.
[ OK ] Listening on GnuPG cryptographic a…rase cache for /etc/pacman.d/gnupg.
[ OK ] Listening on GnuPG public key mana…nt service for /etc/pacman.d/gnupg.
[ OK ] Reached target Socket Units.
Starting D-Bus System Message Bus...
[ OK ] Started D-Bus System Message Bus.
[ OK ] Reached target Basic System.
Starting Network Manager...
Starting NTP client/server...
Starting Self Monitoring and Reporting Technology (SMART) Daemon...
Starting User Login Management...
[ OK ] Started User Login Management.
[FAILED] Failed to start Self Monitoring an…eporting Technology (SMART) Daemon.
See 'systemctl status smartd.service' for details.
[ OK ] Started NTP client/server.
Starting Hostname Service...
[ OK ] Started Hostname Service.
[ OK ] Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.
Starting Network Manager Script Dispatcher Service...
[ 20.728747] starfive-dwmac 16030000.ethernet end0: Register MEM_TYPE_PAGE_POOL RxQ-0
[ 20.764046] starfive-dwmac 16030000.ethernet end0: PHY [stmmac-0:00] driver [YT8531 Gigabit Ethernet] (irq=POLL)
[ 20.799038] dwmac4: Master AXI performs fixed burst length
[ 20.818035] starfive-dwmac 16030000.ethernet end0: No Safety Features support found
[ 20.846073] starfive-dwmac 16030000.ethernet end0: IEEE 1588-2008 Advanced Timestamp supported
[ OK ] Started Network Manager Script Dispatcher Service 20.870380] starfive-dwmac 16030000.ethernet end0: registered PTP clock
0m.
[ 20.902978] starfive-dwmac 16030000.ethernet end0: configuring for phy/rgmii-id link mode
[ 20.962026] starfive-dwmac 16040000.ethernet end1: Register MEM_TYPE_PAGE_POOL RxQ-0
[ 20.997507] starfive-dwmac 16040000.ethernet end1: PHY [stmmac-1:00] driver [YT8531 Gigabit Ethernet] (irq=POLL)
[ 21.043007] dwmac4: Master AXI performs fixed burst length
[ 21.067053] starfive-dwmac 16040000.ethernet end1: No Safety Features support found
[ 21.093028] starfive-dwmac 16040000.ethernet end1: IEEE 1588-2008 Advanced Timestamp supported
[ 21.125306] starfive-dwmac 16040000.ethernet end1: registered PTP clock
[ 21.154502] starfive-dwmac 16040000.ethernet end1: configuring for phy/rgmii-id link mode
[ OK ] Started Network Manager.
[ OK ] Reached target Network.
[ OK ] Started OpenSSH Daemon.
Starting Permit User Sessions...
[ OK ] Finished Permit User Sessions.
[ OK ] Started Getty on tty1.
[ OK ] Started Serial Getty on ttyS0.
[ OK ] Reached target Login Prompts.
[ OK ] Reached target Multi-User System.
[ OK ] Reached target Graphical Interface.
Arch Linux 6.6.20-cwt-5.12.0-3 (ttyS0)
ArchVF2 login: [ 24.016865] starfive-dwmac 16030000.ethernet end0: Link is Up - 1Gbps/Full - flow control rx/tx
[ 35.149944] mipi_0p9: disabling
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment