|
[ 0.000000] Booting Linux on physical CPU 0xf00 |
|
[ 0.000000] Linux version 6.1.0-rpi6-rpi-v7 (debian-kernel@lists.debian.org) (gcc-12 (Raspbian 12.2.0-14+rpi1) 12.2.0, GNU ld (GNU Binutils for Raspbian) 2.40) #1 SMP Raspbian 1:6.1.58-1+rpt2 (2023-10-27) |
|
[ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d |
|
[ 0.000000] CPU: div instructions available: patching division code |
|
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache |
|
[ 0.000000] OF: fdt: Machine model: Raspberry Pi 2 Model B Rev 1.1 |
|
[ 0.000000] random: crng init done |
|
[ 0.000000] Memory policy: Data cache writealloc |
|
[ 0.000000] Reserved memory: created CMA memory pool at 0x1e400000, size 256 MiB |
|
[ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool |
|
[ 0.000000] Zone ranges: |
|
[ 0.000000] DMA [mem 0x0000000000000000-0x000000003b3fffff] |
|
[ 0.000000] Normal empty |
|
[ 0.000000] Movable zone start for each node |
|
[ 0.000000] Early memory node ranges |
|
[ 0.000000] node 0: [mem 0x0000000000000000-0x000000003b3fffff] |
|
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000003b3fffff] |
|
[ 0.000000] percpu: Embedded 17 pages/cpu s37012 r8192 d24428 u69632 |
|
[ 0.000000] pcpu-alloc: s37012 r8192 d24428 u69632 alloc=17*4096 |
|
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 |
|
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 240555 |
|
[ 0.000000] Kernel command line: coherent_pool=1M snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyAMA0,115200 console=tty1 root=PARTUUID=20be7e6a-02 rootfstype=ext4 fsck.repair=yes rootwait |
|
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) |
|
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) |
|
[ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off |
|
[ 0.000000] Memory: 670692K/970752K available (10240K kernel code, 1455K rwdata, 3188K rodata, 1024K init, 611K bss, 37916K reserved, 262144K cma-reserved) |
|
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 |
|
[ 0.000000] ftrace: allocating 33790 entries in 100 pages |
|
[ 0.000000] ftrace: allocated 99 pages with 4 groups |
|
[ 0.000000] trace event string verifier disabled |
|
[ 0.000000] rcu: Hierarchical RCU implementation. |
|
[ 0.000000] Rude variant of Tasks RCU enabled. |
|
[ 0.000000] Tracing variant of Tasks RCU enabled. |
|
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. |
|
[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 |
|
[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. |
|
[ 0.000000] arch_timer: cp15 timer(s) running at 19.20MHz (phys). |
|
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns |
|
[ 0.000003] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns |
|
[ 0.000028] Switching to timer-based delay loop, resolution 52ns |
|
[ 0.000539] Console: colour dummy device 80x30 |
|
[ 0.001299] printk: console [tty1] enabled |
|
[ 0.001387] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000) |
|
[ 0.001450] CPU: Testing write buffer coherency: ok |
|
[ 0.001566] pid_max: default: 32768 minimum: 301 |
|
[ 0.001755] LSM: Security Framework initializing |
|
[ 0.002071] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) |
|
[ 0.002134] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) |
|
[ 0.003728] cgroup: Disabling memory control group subsystem |
|
[ 0.004705] CPU0: update cpu_capacity 1024 |
|
[ 0.004764] CPU0: thread -1, cpu 0, socket 15, mpidr 80000f00 |
|
[ 0.006296] cblist_init_generic: Setting adjustable number of callback queues. |
|
[ 0.006362] cblist_init_generic: Setting shift to 2 and lim to 1. |
|
[ 0.006590] cblist_init_generic: Setting adjustable number of callback queues. |
|
[ 0.006634] cblist_init_generic: Setting shift to 2 and lim to 1. |
|
[ 0.006872] Setting up static identity map for 0x100000 - 0x10003c |
|
[ 0.007153] rcu: Hierarchical SRCU implementation. |
|
[ 0.007190] rcu: Max phase no-delay instances is 1000. |
|
[ 0.008451] smp: Bringing up secondary CPUs ... |
|
[ 0.009968] CPU1: update cpu_capacity 1024 |
|
[ 0.009992] CPU1: thread -1, cpu 1, socket 15, mpidr 80000f01 |
|
[ 0.011620] CPU2: update cpu_capacity 1024 |
|
[ 0.011638] CPU2: thread -1, cpu 2, socket 15, mpidr 80000f02 |
|
[ 0.013093] CPU3: update cpu_capacity 1024 |
|
[ 0.013111] CPU3: thread -1, cpu 3, socket 15, mpidr 80000f03 |
|
[ 0.013271] smp: Brought up 1 node, 4 CPUs |
|
[ 0.013433] SMP: Total of 4 processors activated (153.60 BogoMIPS). |
|
[ 0.013467] CPU: All CPU(s) started in HYP mode. |
|
[ 0.013491] CPU: Virtualization extensions available. |
|
[ 0.014709] devtmpfs: initialized |
|
[ 0.031687] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5 |
|
[ 0.032114] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns |
|
[ 0.032193] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) |
|
[ 0.047808] pinctrl core: initialized pinctrl subsystem |
|
[ 0.049702] NET: Registered PF_NETLINK/PF_ROUTE protocol family |
|
[ 0.053216] DMA: preallocated 1024 KiB pool for atomic coherent allocations |
|
[ 0.059728] audit: initializing netlink subsys (disabled) |
|
[ 0.060306] audit: type=2000 audit(0.060:1): state=initialized audit_enabled=0 res=1 |
|
[ 0.061255] thermal_sys: Registered thermal governor 'step_wise' |
|
[ 0.061778] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. |
|
[ 0.061855] hw-breakpoint: maximum watchpoint size is 8 bytes. |
|
[ 0.062250] Serial: AMBA PL011 UART driver |
|
[ 0.070879] bcm2835-mbox 3f00b880.mailbox: mailbox enabled |
|
[ 0.090356] raspberrypi-firmware soc:firmware: Attached to firmware from 2023-10-17T15:42:39, variant start |
|
[ 0.100384] raspberrypi-firmware soc:firmware: Firmware hash is 30f0c5e4d076da3ab4f341d88e7d505760b93ad7 |
|
[ 0.152500] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. |
|
[ 0.163342] bcm2835-dma 3f007000.dma: DMA legacy API manager, dmachans=0x1 |
|
[ 0.165770] SCSI subsystem initialized |
|
[ 0.166162] usbcore: registered new interface driver usbfs |
|
[ 0.166270] usbcore: registered new interface driver hub |
|
[ 0.166376] usbcore: registered new device driver usb |
|
[ 0.166696] usb_phy_generic phy: supply vcc not found, using dummy regulator |
|
[ 0.167346] pps_core: LinuxPPS API ver. 1 registered |
|
[ 0.167383] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> |
|
[ 0.167449] PTP clock support registered |
|
[ 2.016592] clocksource: Switched to clocksource arch_sys_counter |
|
[ 2.017822] VFS: Disk quotas dquot_6.6.0 |
|
[ 2.017965] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) |
|
[ 2.018233] FS-Cache: Loaded |
|
[ 2.018704] CacheFiles: Loaded |
|
[ 2.073820] NET: Registered PF_INET protocol family |
|
[ 2.074363] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) |
|
[ 2.078993] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) |
|
[ 2.079117] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) |
|
[ 2.079204] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) |
|
[ 2.079362] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear) |
|
[ 2.079792] TCP: Hash tables configured (established 8192 bind 8192) |
|
[ 2.080101] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) |
|
[ 2.080236] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) |
|
[ 2.080717] NET: Registered PF_UNIX/PF_LOCAL protocol family |
|
[ 2.081804] RPC: Registered named UNIX socket transport module. |
|
[ 2.081871] RPC: Registered udp transport module. |
|
[ 2.081902] RPC: Registered tcp transport module. |
|
[ 2.081928] RPC: Registered tcp NFSv4.1 backchannel transport module. |
|
[ 2.082528] Trying to unpack rootfs image as initramfs... |
|
[ 2.096777] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available |
|
[ 2.134741] Initialise system trusted keyrings |
|
[ 2.135602] workingset: timestamp_bits=14 max_order=18 bucket_order=4 |
|
[ 2.148364] zbud: loaded |
|
[ 2.152165] NFS: Registering the id_resolver key type |
|
[ 2.152341] Key type id_resolver registered |
|
[ 2.152391] Key type id_legacy registered |
|
[ 2.152666] nfs4filelayout_init: NFSv4 File Layout Driver Registering... |
|
[ 2.152740] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... |
|
[ 2.154925] Key type asymmetric registered |
|
[ 2.155001] Asymmetric key parser 'x509' registered |
|
[ 2.155334] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) |
|
[ 2.155415] io scheduler mq-deadline registered |
|
[ 2.155447] io scheduler kyber registered |
|
[ 2.172921] simple-framebuffer 3e402000.framebuffer: framebuffer at 0x3e402000, 0x7f8000 bytes |
|
[ 2.173025] simple-framebuffer 3e402000.framebuffer: format=a8r8g8b8, mode=1920x1080x32, linelength=7680 |
|
[ 2.204988] Console: switching to colour frame buffer device 240x67 |
|
[ 2.234476] simple-framebuffer 3e402000.framebuffer: fb0: simplefb registered! |
|
[ 2.241927] bcm2835-rng 3f104000.rng: hwrng registered |
|
[ 2.242676] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB) |
|
[ 2.274036] brd: module loaded |
|
[ 2.287461] loop: module loaded |
|
[ 2.288885] Loading iSCSI transport class v2.0-870. |
|
[ 2.291418] usbcore: registered new interface driver lan78xx |
|
[ 2.291720] usbcore: registered new interface driver smsc95xx |
|
[ 2.291915] dwc_otg: version 3.00a 10-AUG-2012 (platform bus) |
|
[ 3.020847] Core Release: 2.80a |
|
[ 3.021031] Setting default values for core params |
|
[ 3.021207] Finished setting default values for core params |
|
[ 3.221775] Using Buffer DMA mode |
|
[ 3.221971] Periodic Transfer Interrupt Enhancement - disabled |
|
[ 3.222146] Multiprocessor Interrupt Enhancement - disabled |
|
[ 3.222310] OTG VER PARAM: 0, OTG VER FLAG: 0 |
|
[ 3.222556] Dedicated Tx FIFOs mode |
|
|
|
[ 3.240133] WARN::dwc_otg_hcd_init:1072: FIQ DMA bounce buffers: virt = 9e504000 dma = 0xde504000 len=9024 |
|
[ 3.240597] FIQ FSM acceleration enabled for : |
|
Non-periodic Split Transactions |
|
Periodic Split Transactions |
|
High-Speed Isochronous Endpoints |
|
Interrupt/Control Split Transaction hack enabled |
|
[ 3.241172] dwc_otg: Microframe scheduler enabled |
|
|
|
[ 3.248309] WARN::hcd_init_fiq:457: FIQ on core 1 |
|
|
|
[ 3.248559] WARN::hcd_init_fiq:458: FIQ ASM at 807f3a80 length 36 |
|
|
|
[ 3.248798] WARN::hcd_init_fiq:496: MPHI regs_base at bb810000 |
|
[ 3.249043] dwc_otg 3f980000.usb: DWC OTG Controller |
|
[ 3.249355] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1 |
|
[ 3.257075] dwc_otg 3f980000.usb: irq 89, io mem 0x00000000 |
|
[ 3.264705] Init: Port Power? op_state=1 |
|
[ 3.272165] Init: Power Port (0) |
|
[ 3.280025] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 |
|
[ 3.287682] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
|
[ 3.295348] usb usb1: Product: DWC OTG Controller |
|
[ 3.303019] usb usb1: Manufacturer: Linux 6.1.0-rpi6-rpi-v7 dwc_otg_hcd |
|
[ 3.310795] usb usb1: SerialNumber: 3f980000.usb |
|
[ 3.319683] hub 1-0:1.0: USB hub found |
|
[ 3.327437] hub 1-0:1.0: 1 port detected |
|
[ 3.336220] dwc_otg: FIQ enabled |
|
[ 3.336255] dwc_otg: NAK holdoff enabled |
|
[ 3.336266] dwc_otg: FIQ split-transaction FSM enabled |
|
[ 3.336308] Module dwc_common_port init |
|
[ 3.337006] usbcore: registered new interface driver usb-storage |
|
[ 3.345099] mousedev: PS/2 mouse device common for all mice |
|
[ 3.361851] sdhci: Secure Digital Host Controller Interface driver |
|
[ 3.369439] sdhci: Copyright(c) Pierre Ossman |
|
[ 3.377540] sdhci-pltfm: SDHCI platform and OF driver helper |
|
[ 3.387577] ledtrig-cpu: registered to indicate activity on CPUs |
|
[ 3.395806] hid: raw HID events driver (C) Jiri Kosina |
|
[ 3.403765] usbcore: registered new interface driver usbhid |
|
[ 3.411306] usbhid: USB HID core driver |
|
[ 3.426214] Initializing XFRM netlink socket |
|
[ 3.433996] NET: Registered PF_PACKET protocol family |
|
[ 3.441650] Key type dns_resolver registered |
|
[ 3.449404] Registering SWP/SWPB emulation handler |
|
[ 3.456992] Indeed it is in host mode hprt0 = 00021501 |
|
[ 3.458089] registered taskstats version 1 |
|
[ 3.471867] Loading compiled-in X.509 certificates |
|
[ 3.666669] usb 1-1: new high-speed USB device number 2 using dwc_otg |
|
[ 3.674314] Indeed it is in host mode hprt0 = 00001101 |
|
[ 3.727919] Freeing initrd memory: 10240K |
|
[ 3.801396] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1' |
|
[ 3.874163] Loaded X.509 cert 'Debian Secure Boot Signer 2022 - linux: 14011249c2675ea8e5148542202005810584b25f' |
|
[ 3.883230] Key type .fscrypt registered |
|
[ 3.890326] Key type fscrypt-provisioning registered |
|
[ 3.913345] uart-pl011 3f201000.serial: cts_event_workaround enabled |
|
[ 3.917164] usb 1-1: New USB device found, idVendor=0424, idProduct=9514, bcdDevice= 2.00 |
|
[ 3.920918] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 114, base_baud = 0) is a PL011 rev2 |
|
[ 3.927840] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 |
|
[ 3.928932] hub 1-1:1.0: USB hub found |
|
[ 3.950056] hub 1-1:1.0: 5 ports detected |
|
[ 3.954439] printk: console [ttyAMA0] enabled |
|
[ 4.286521] usb 1-1.1: new high-speed USB device number 3 using dwc_otg |
|
[ 4.291847] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer |
|
[ 4.483745] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00, bcdDevice= 2.00 |
|
[ 4.490078] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver |
|
[ 4.497030] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 |
|
[ 5.225390] sdhost: log_buf @ 14c922d2 (de503000) |
|
[ 5.228395] smsc95xx v2.0.0 |
|
[ 5.281819] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1) |
|
[ 5.299252] of_cfs_init |
|
[ 5.310204] of_cfs_init: OK |
|
[ 5.328862] Freeing unused kernel image (initmem) memory: 1024K |
|
[ 5.343858] mmc0: host does not support reading read-only switch, assuming write-enable |
|
[ 5.362394] mmc0: new high speed SDHC card at address 1234 |
|
[ 5.377019] Run /init as init process |
|
[ 5.377222] mmcblk0: mmc0:1234 SA08G 7.22 GiB |
|
[ 5.384520] with arguments: |
|
[ 5.399875] mmcblk0: p1 p2 |
|
[ 5.400253] /init |
|
[ 5.408730] mmcblk0: mmc0:1234 SA08G 7.22 GiB |
|
[ 5.410503] with environment: |
|
[ 5.410511] HOME=/ |
|
[ 5.422305] TERM=linux |
|
[ 5.425734] SMSC LAN8700 usb-001:003:01: attached PHY driver (mii_bus:phy_addr=usb-001:003:01, irq=199) |
|
[ 5.445473] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, xx:xx:xx:xx:xx:xx |
|
[ 5.566649] usb 1-1.3: new full-speed USB device number 4 using dwc_otg |
|
[ 5.722055] usb 1-1.3: New USB device found, idVendor=1d50, idProduct=6122, bcdDevice= 1.02 |
|
[ 5.738928] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
|
[ 5.754425] usb 1-1.3: Product: UHK 60 v1 |
|
[ 5.766527] usb 1-1.3: Manufacturer: Ultimate Gadget Laboratories |
|
[ 5.797546] hid-generic 0003:1D50:6122.0001: hiddev96,hidraw0: USB HID v1.10 Device [Ultimate Gadget Laboratories UHK 60 v1] on usb-3f980000.usb-1.3/input0 |
|
[ 5.835260] input: Ultimate Gadget Laboratories UHK 60 v1 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.3/1-1.3:1.1/0003:1D50:6122.0002/input/input0 |
|
[ 5.936750] hid-generic 0003:1D50:6122.0002: input,hidraw1: USB HID v1.10 Keyboard [Ultimate Gadget Laboratories UHK 60 v1] on usb-3f980000.usb-1.3/input1 |
|
[ 5.964239] input: Ultimate Gadget Laboratories UHK 60 v1 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.3/1-1.3:1.2/0003:1D50:6122.0003/input/input1 |
|
[ 6.057437] hid-generic 0003:1D50:6122.0003: input,hidraw2: USB HID v1.10 Device [Ultimate Gadget Laboratories UHK 60 v1] on usb-3f980000.usb-1.3/input2 |
|
[ 6.084662] input: Ultimate Gadget Laboratories UHK 60 v1 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.3/1-1.3:1.3/0003:1D50:6122.0004/input/input2 |
|
[ 6.177579] hid-generic 0003:1D50:6122.0004: input,hidraw3: USB HID v1.10 Device [Ultimate Gadget Laboratories UHK 60 v1] on usb-3f980000.usb-1.3/input3 |
|
[ 6.207920] input: Ultimate Gadget Laboratories UHK 60 v1 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.3/1-1.3:1.4/0003:1D50:6122.0005/input/input3 |
|
[ 6.232860] hid-generic 0003:1D50:6122.0005: input,hidraw4: USB HID v1.10 Mouse [Ultimate Gadget Laboratories UHK 60 v1] on usb-3f980000.usb-1.3/input4 |
|
[ 8.796097] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none. |
|
[ 9.777244] systemd[1]: System time before build time, advancing clock. |
|
[ 10.110487] NET: Registered PF_INET6 protocol family |
|
[ 10.128557] Segment Routing with IPv6 |
|
[ 10.142446] In-situ OAM (IOAM) with IPv6 |
|
[ 10.292156] systemd[1]: systemd 252.17-1~deb12u1+rpi1 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified) |
|
[ 10.347010] systemd[1]: Detected architecture arm. |
|
[ 10.416969] systemd[1]: Hostname set to <raspberrypi>. |
|
[ 10.823862] uart-pl011 3f201000.serial: no DMA platform data |
|
[ 12.318661] systemd[1]: Queued start job for default target multi-user.target. |
|
[ 12.383777] systemd[1]: Created slice system-getty.slice - Slice /system/getty. |
|
[ 12.418945] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe. |
|
[ 12.453564] systemd[1]: Created slice system-serial\x2dgetty.slice - Slice /system/serial-getty. |
|
[ 12.489487] systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice /system/systemd-fsck. |
|
[ 12.523880] systemd[1]: Created slice user.slice - User and Session Slice. |
|
[ 12.555252] systemd[1]: Started systemd-ask-password-console.path - Dispatch Password Requests to Console Directory Watch. |
|
[ 12.591314] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch. |
|
[ 12.628461] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point. |
|
[ 12.667284] systemd[1]: Reached target cryptsetup.target - Local Encrypted Volumes. |
|
[ 12.701033] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes. |
|
[ 12.736243] systemd[1]: Reached target paths.target - Path Units. |
|
[ 12.768261] systemd[1]: Reached target slices.target - Slice Units. |
|
[ 12.800244] systemd[1]: Reached target swap.target - Swaps. |
|
[ 12.831659] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes. |
|
[ 12.871483] systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket. |
|
[ 12.906203] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe. |
|
[ 12.942275] systemd[1]: Listening on systemd-journald-audit.socket - Journal Audit Socket. |
|
[ 12.976632] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log). |
|
[ 13.011048] systemd[1]: Listening on systemd-journald.socket - Journal Socket. |
|
[ 13.045461] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket. |
|
[ 13.079055] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket. |
|
[ 13.113013] systemd[1]: dev-hugepages.mount - Huge Pages File System was skipped because of an unmet condition check (ConditionPathExists=/sys/kernel/mm/hugepages). |
|
[ 13.177386] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System... |
|
[ 13.220159] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System... |
|
[ 13.262944] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System... |
|
[ 13.298941] systemd[1]: auth-rpcgss-module.service - Kernel Module supporting RPCSEC_GSS was skipped because of an unmet condition check (ConditionPathExists=/etc/krb5.keytab). |
|
[ 13.339462] systemd[1]: Starting fake-hwclock.service - Restore / save the current clock... |
|
[ 13.388416] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout... |
|
[ 13.438308] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes... |
|
[ 13.491684] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs... |
|
[ 13.542121] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod... |
|
[ 13.591312] systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm... |
|
[ 13.639370] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore... |
|
[ 13.666172] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com |
|
[ 13.711247] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse... |
|
[ 13.761750] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop... |
|
[ 13.804125] systemd[1]: systemd-fsck-root.service - File System Check on Root Device was skipped because of an unmet condition check (ConditionPathExists=!/run/initramfs/fsck-root). |
|
[ 13.844451] fuse: init (API version 7.37) |
|
[ 13.871606] systemd[1]: Starting systemd-journald.service - Journal Service... |
|
[ 13.927231] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules... |
|
[ 13.975713] systemd[1]: Starting systemd-remount-fs.service - Remount Root and Kernel File Systems... |
|
[ 14.034795] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices... |
|
[ 14.137919] systemd[1]: Mounted dev-mqueue.mount - POSIX Message Queue File System. |
|
[ 14.173406] systemd[1]: Mounted sys-kernel-debug.mount - Kernel Debug File System. |
|
[ 14.208567] systemd[1]: Mounted sys-kernel-tracing.mount - Kernel Trace File System. |
|
[ 14.244948] systemd[1]: Finished fake-hwclock.service - Restore / save the current clock. |
|
[ 14.282809] systemd[1]: Finished kmod-static-nodes.service - Create List of Static Device Nodes. |
|
[ 14.320649] systemd[1]: Started systemd-journald.service - Journal Service. |
|
[ 14.929789] EXT4-fs (mmcblk0p2): re-mounted. Quota mode: none. |
|
[ 15.177136] systemd-journald[236]: Received client request to flush runtime journal. |
|
[ 15.203348] systemd-journald[236]: File /var/log/journal/ac9934b3efb047f09da886061f5a0f45/system.journal corrupted or uncleanly shut down, renaming and replacing. |
|
[ 19.509282] mc: Linux media interface: v0.10 |
|
[ 19.554429] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned. |
|
[ 19.577199] bcm2835_vc_sm_cma_probe: Videocore shared memory driver |
|
[ 19.577261] [vc_sm_connected_init]: start |
|
[ 19.578683] [vc_sm_connected_init]: installed successfully |
|
[ 19.746978] videodev: Linux video capture interface: v2.00 |
|
[ 19.780245] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned. |
|
[ 19.791592] rpi-gpiomem 3f200000.gpiomem: window base 0x3f200000 size 0x00001000 |
|
[ 19.802946] rpi-gpiomem 3f200000.gpiomem: initialised 1 regions as /dev/gpiomem |
|
[ 19.804751] bcm2835_audio bcm2835_audio: card created with 8 channels |
|
[ 20.171503] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned. |
|
[ 20.241098] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned. |
|
[ 20.452169] bcm2835_isp: module is from the staging directory, the quality is unknown, you have been warned. |
|
[ 20.531494] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video13 |
|
[ 20.533804] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video14 |
|
[ 20.537964] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video15 |
|
[ 20.544895] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video16 |
|
[ 20.544979] bcm2835-isp bcm2835-isp: Register output node 0 with media controller |
|
[ 20.545074] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller |
|
[ 20.545105] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller |
|
[ 20.545155] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller |
|
[ 20.548932] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned. |
|
[ 20.571245] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video20 |
|
[ 20.572621] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video21 |
|
[ 20.579904] bcm2835-codec bcm2835-codec: Device registered as /dev/video10 |
|
[ 20.580068] bcm2835-codec bcm2835-codec: Loaded V4L2 decode |
|
[ 20.588190] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video22 |
|
[ 20.597054] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video23 |
|
[ 20.597126] bcm2835-isp bcm2835-isp: Register output node 0 with media controller |
|
[ 20.597165] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller |
|
[ 20.597191] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller |
|
[ 20.597243] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller |
|
[ 20.597781] bcm2835-isp bcm2835-isp: Loaded V4L2 bcm2835-isp |
|
[ 20.620310] bcm2835-codec bcm2835-codec: Device registered as /dev/video11 |
|
[ 20.620394] bcm2835-codec bcm2835-codec: Loaded V4L2 encode |
|
[ 20.631712] bcm2835-codec bcm2835-codec: Device registered as /dev/video12 |
|
[ 20.631820] bcm2835-codec bcm2835-codec: Loaded V4L2 isp |
|
[ 20.640288] bcm2835-codec bcm2835-codec: Device registered as /dev/video18 |
|
[ 20.640395] bcm2835-codec bcm2835-codec: Loaded V4L2 image_fx |
|
[ 20.655023] bcm2835-codec bcm2835-codec: Device registered as /dev/video31 |
|
[ 20.655259] bcm2835-codec bcm2835-codec: Loaded V4L2 encode_image |
|
[ 21.684300] Console: switching to colour dummy device 80x30 |
|
[ 21.702333] vc4-drm soc:gpu: bound 3f400000.hvs (ops vc4_hvs_ops [vc4]) |
|
[ 21.726869] Registered IR keymap rc-cec |
|
[ 21.727379] rc rc0: vc4-hdmi as /devices/platform/soc/3f902000.hdmi/rc/rc0 |
|
[ 21.727760] input: vc4-hdmi as /devices/platform/soc/3f902000.hdmi/rc/rc0/input4 |
|
[ 21.750581] vc4-drm soc:gpu: bound 3f902000.hdmi (ops vc4_hdmi_ops [vc4]) |
|
[ 21.751439] vc4-drm soc:gpu: bound 3f004000.txp (ops vc4_txp_ops [vc4]) |
|
[ 21.752080] vc4-drm soc:gpu: bound 3f206000.pixelvalve (ops vc4_crtc_ops [vc4]) |
|
[ 21.752674] vc4-drm soc:gpu: bound 3f207000.pixelvalve (ops vc4_crtc_ops [vc4]) |
|
[ 21.753282] vc4-drm soc:gpu: bound 3f807000.pixelvalve (ops vc4_crtc_ops [vc4]) |
|
[ 21.753792] vc4-drm soc:gpu: bound 3fc00000.v3d (ops vc4_v3d_ops [vc4]) |
|
[ 21.836318] [drm] Initialized vc4 0.0.0 20140616 for soc:gpu on minor 0 |
|
[ 21.915241] vc4-drm soc:gpu: [drm] The core clock cannot reach frequencies high enough to support 4k @ 60Hz. |
|
[ 21.915296] vc4-drm soc:gpu: [drm] Please change your config.txt file to add hdmi_enable_4kp60. |
|
[ 22.098451] Console: switching to colour frame buffer device 240x67 |
|
[ 22.137739] vc4-drm soc:gpu: [drm] fb0: vc4drmfb frame buffer device |
|
[ 22.589308] Adding 102396k swap on /var/swap. Priority:-2 extents:1 across:102396k SSFS |
|
[ 25.319571] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup |
|
[ 25.321847] smsc95xx 1-1.1:1.0 eth0: Link is Up - 10Mbps/Full - flow control off |
|
[ 25.321962] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready |
|
[ 70.867498] smsc95xx 1-1.1:1.0 eth0: Link is Down |
|
[ 382.358776] smsc95xx 1-1.1:1.0 eth0: Link is Up - 100Mbps/Full - flow control off |
|
[ 382.358915] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready |