Skip to content

Instantly share code, notes, and snippets.

@oowl
Created September 14, 2018 13:26
Show Gist options
  • Save oowl/aae80a2c9fd861adcea2850ffb9a991e to your computer and use it in GitHub Desktop.
Save oowl/aae80a2c9fd861adcea2850ffb9a991e to your computer and use it in GitHub Desktop.
chromebook pixel 2015 audio problem dmesg
[ 2.251862] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.256468] SCSI subsystem initialized
[ 2.260928] ACPI: bus type USB registered
[ 2.260953] usbcore: registered new interface driver usbfs
[ 2.260962] usbcore: registered new interface driver hub
[ 2.260991] usbcore: registered new device driver usb
[ 2.266875] libata version 3.00 loaded.
[ 2.267956] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 2.267963] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 2.269039] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x000000000004b810
[ 2.269044] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 2.269365] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[ 2.269367] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.269369] usb usb1: Product: xHCI Host Controller
[ 2.269371] usb usb1: Manufacturer: Linux 4.19.0-rc2-1-ARCH-gf8f65382c98a xhci-hcd
[ 2.269373] usb usb1: SerialNumber: 0000:00:14.0
[ 2.269506] hub 1-0:1.0: USB hub found
[ 2.269640] hub 1-0:1.0: 11 ports detected
[ 2.270285] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 2.270290] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 2.270294] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[ 2.270341] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.19
[ 2.270342] ahci 0000:00:1f.2: version 3.0
[ 2.270343] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.270345] usb usb2: Product: xHCI Host Controller
[ 2.270346] usb usb2: Manufacturer: Linux 4.19.0-rc2-1-ARCH-gf8f65382c98a xhci-hcd
[ 2.270348] usb usb2: SerialNumber: 0000:00:14.0
[ 2.270807] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 2.270935] hub 2-0:1.0: USB hub found
[ 2.270940] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x1 impl SATA mode
[ 2.270942] ahci 0000:00:1f.2: flags: 64bit ncq ilck stag pm led clo only pio slum part deso sadm sds apst
[ 2.270948] hub 2-0:1.0: 4 ports detected
[ 2.271678] scsi host0: ahci
[ 2.275489] scsi host1: ahci
[ 2.275577] scsi host2: ahci
[ 2.275649] scsi host3: ahci
[ 2.275678] ata1: SATA max UDMA/133 abar m32768@0xe1210000 port 0xe1210100 irq 43
[ 2.275679] ata2: DUMMY
[ 2.275680] ata3: DUMMY
[ 2.275681] ata4: DUMMY
[ 2.276240] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 2.588913] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2.589167] ata1.00: ATA-10: KINGSTON RBU-SUS151S364GD, S9FM02.3, max UDMA/133
[ 2.589169] ata1.00: 125045424 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 2.589589] ata1.00: configured for UDMA/133
[ 2.589789] scsi 0:0:0:0: Direct-Access ATA KINGSTON RBU-SUS 02.3 PQ: 0 ANSI: 5
[ 2.593800] sd 0:0:0:0: [sda] 125045424 512-byte logical blocks: (64.0 GB/59.6 GiB)
[ 2.593813] sd 0:0:0:0: [sda] Write Protect is off
[ 2.593816] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.593839] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.595546] sda: sda1 sda2
[ 2.595910] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.598392] usb 1-2: new high-speed USB device number 2 using xhci_hcd
[ 2.674518] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 2.684349] random: fast init done
[ 2.743657] usb 1-2: New USB device found, idVendor=05ac, idProduct=12a8, bcdDevice= 8.04
[ 2.743659] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.743660] usb 1-2: Product: iPhone
[ 2.743662] usb 1-2: Manufacturer: Apple Inc.
[ 2.743663] usb 1-2: SerialNumber: 207e0296b2f401141189d7525ef925b5894981ec
[ 2.784476] systemd[1]: systemd 239 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN +PCRE2 default-hierarchy=hybrid)
[ 2.798834] systemd[1]: Detected architecture x86-64.
[ 2.804645] systemd[1]: Set hostname to <Attenuation-cb2015>.
[ 2.868386] usb 1-4: new high-speed USB device number 3 using xhci_hcd
[ 2.898843] random: systemd: uninitialized urandom read (16 bytes read)
[ 2.900091] systemd[1]: Listening on udev Control Socket.
[ 2.900162] random: systemd: uninitialized urandom read (16 bytes read)
[ 2.900275] systemd[1]: Listening on Journal Socket (/dev/log).
[ 2.900288] random: systemd: uninitialized urandom read (16 bytes read)
[ 2.901528] systemd[1]: Created slice User and Session Slice.
[ 2.901597] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ 2.901720] systemd[1]: Listening on Journal Socket.
[ 2.902028] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 2.902095] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 2.924618] EXT4-fs (sda2): re-mounted. Opts: (null)
[ 2.930959] vfs_monitor: loading out-of-tree module taints kernel.
[ 2.931622] mp: /, major: 8, minor: 2
[ 2.931623] mp: /tmp, major: 0, minor: 43
[ 2.931625] partition count: 2, comm[250]: systemd-modules, path: /usr/lib/systemd/systemd-modules-load, cmdline: /usr/lib/systemd/systemd-modules-load
[ 2.961810] systemd-journald[243]: Received request to flush runtime journal from PID 1
[ 3.016225] usb 1-4: New USB device found, idVendor=05e3, idProduct=0727, bcdDevice= 2.60
[ 3.016226] usb 1-4: New USB device strings: Mfr=3, Product=4, SerialNumber=2
[ 3.016228] usb 1-4: Product: USB Storage
[ 3.016229] usb 1-4: Manufacturer: Generic
[ 3.016230] usb 1-4: SerialNumber: 000000000260
[ 3.019100] register_kretprobes 10 ok
[ 3.125885] chromeos ramoops using acpi device.
[ 3.132020] media: Linux media interface: v0.10
[ 3.138385] usb 1-7: new high-speed USB device number 4 using xhci_hcd
[ 3.149407] pstore: Registered ramoops as persistent store backend
[ 3.149412] ramoops: attached 0x100000@0x7ce43000, ecc: 0/0
[ 3.163390] ACPI: AC Adapter [AC] (off-line)
[ 3.165473] videodev: Linux video capture interface: v2.00
[ 3.166221] battery: ACPI: Battery Slot [BAT0] (battery present)
[ 3.167104] cros_ec_lpcs GOOG0004:00: EC ID not detected
[ 3.271160] tpm_tis 00:08: 1.2 TPM (device-id 0xB, rev-id 16)
[ 3.286468] tpm tpm0: [Firmware Bug]: TPM interrupt not working, polling instead
[ 3.287803] usb 1-7: New USB device found, idVendor=2232, idProduct=6001, bcdDevice= 0.02
[ 3.287806] usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.287807] usb 1-7: Product: NCM-G102
[ 3.287809] usb 1-7: Manufacturer: NMGAAI00010200257300004
[ 3.296431] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 3.296444] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 3.302496] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 3.302934] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[ 3.302938] cfg80211: failed to load regulatory.db
[ 3.304696] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 3.317766] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
[ 3.317768] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 3.317769] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 3.317770] RAPL PMU: hw unit of domain dram 2^-14 Joules
[ 3.317771] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[ 3.327743] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card1/input5
[ 3.327807] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card1/input6
[ 3.327866] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card1/input7
[ 3.327924] input: HDA Intel HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/sound/card1/input8
[ 3.327975] input: HDA Intel HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.0/sound/card1/input9
[ 3.341933] cryptd: max_cpu_qlen set to 1000
[ 3.366497] Intel(R) Wireless WiFi driver for Linux
[ 3.366498] Copyright(c) 2003- 2015 Intel Corporation
[ 3.368075] atmel_mxt_ts i2c-ATML0000:01: Family: 164 Variant: 17 Firmware V1.0.AA Objects: 32
[ 3.376084] AVX2 version of gcm_enc/dec engaged.
[ 3.376085] AES CTR mode by8 optimization enabled
[ 3.378633] iTCO_vendor_support: vendor-support=0
[ 3.387992] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 3.388055] iTCO_wdt: Found a Wildcat Point_LP TCO device (Version=2, TCOBASE=0x1060)
[ 3.388475] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 3.388488] atmel_mxt_ts i2c-ATML0000:01: Direct firmware load for maxtouch.cfg failed with error -2
[ 3.389167] atmel_mxt_ts i2c-ATML0000:01: Resetting device
[ 3.392047] iwlwifi 0000:01:00.0: loaded firmware version 17.948900127.0 op_mode iwlmvm
[ 3.397580] atmel_mxt_ts i2c-ATML0001:01: Family: 164 Variant: 13 Firmware V1.0.AA Objects: 41
[ 3.411723] usb 1-8: new full-speed USB device number 5 using xhci_hcd
[ 3.412208] random: crng init done
[ 3.412209] random: 7 urandom warning(s) missed due to ratelimiting
[ 3.419929] atmel_mxt_ts i2c-ATML0001:01: Direct firmware load for maxtouch.cfg failed with error -2
[ 3.421128] atmel_mxt_ts i2c-ATML0001:01: Touchscreen size X2559Y1699
[ 3.421223] input: Atmel maXTouch Touchscreen as /devices/pci0000:00/INT3433:00/i2c-1/i2c-ATML0001:01/input/input10
[ 3.475780] intel-spi intel-spi: s25fl064k (8192 Kbytes)
[ 3.497360] Creating 1 MTD partitions on "intel-spi":
[ 3.497364] 0x000000000000-0x000000800000 : "BIOS"
[ 3.515076] atmel_mxt_ts i2c-ATML0000:01: Touchscreen size X960Y540
[ 3.515165] input: Atmel maXTouch Touchpad as /devices/pci0000:00/INT3432:00/i2c-0/i2c-ATML0000:01/input/input11
[ 3.523708] mousedev: PS/2 mouse device common for all mice
[ 3.550249] sst-acpi INT3438:00: DesignWare DMA Controller, 8 channels
[ 3.553256] usb 1-8: New USB device found, idVendor=8087, idProduct=07dc, bcdDevice= 0.01
[ 3.553259] usb 1-8: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.583403] 8021q: 802.1Q VLAN Support v1.8
[ 3.584997] haswell-pcm-audio haswell-pcm-audio: Direct firmware load for intel/IntcPP01.bin failed with error -2
[ 3.585001] haswell-pcm-audio haswell-pcm-audio: fw image intel/IntcPP01.bin not available(-2)
[ 3.586534] haswell-pcm-audio haswell-pcm-audio: FW loaded, mailbox readback FW info: type 01, - version: 00.00, build 77, source commit id: 876ac6906f31a43b6772b23c7c983ce9dcb18a19
[ 3.592632] iwlwifi 0000:01:00.0: Detected Intel(R) Dual Band Wireless AC 7260, REV=0x144
[ 3.618562] iwlwifi 0000:01:00.0: base HW address: 6c:29:95:7c:a9:02
[ 3.619784] usb-storage 1-4:1.0: USB Mass Storage device detected
[ 3.621550] intel_rapl: Found RAPL domain package
[ 3.621552] intel_rapl: Found RAPL domain core
[ 3.621553] intel_rapl: Found RAPL domain uncore
[ 3.621554] intel_rapl: Found RAPL domain dram
[ 3.622632] scsi host4: usb-storage 1-4:1.0
[ 3.622751] usbcore: registered new interface driver usb-storage
[ 3.639629] uvcvideo: Found UVC 1.00 device NCM-G102 (2232:6001)
[ 3.644753] usbcore: registered new interface driver uas
[ 3.652049] bdw-rt5677 bdw-rt5677: snd-soc-dummy-dai <-> System Pin mapping ok
[ 3.652479] rt5677 i2c-RT5677CE:00: Can't add headphone jack gpio
[ 3.652554] rt5677 i2c-RT5677CE:00: Can't add mic jack gpio
[ 3.652622] bdw-rt5677 bdw-rt5677: rt5677-aif1 <-> snd-soc-dummy-dai mapping ok
[ 3.652701] bdw-rt5677 bdw-rt5677: ASoC: no DMI vendor name!
[ 3.654850] input: bdw-rt5677 Headphone Jack as /devices/pci0000:00/INT3438:00/bdw-rt5677/sound/card0/input12
[ 3.654918] input: bdw-rt5677 Mic Jack as /devices/pci0000:00/INT3438:00/bdw-rt5677/sound/card0/input13
[ 3.658640] Bluetooth: Core ver 2.22
[ 3.658666] NET: Registered protocol family 31
[ 3.658667] Bluetooth: HCI device and connection manager initialized
[ 3.658671] Bluetooth: HCI socket layer initialized
[ 3.658673] Bluetooth: L2CAP socket layer initialized
[ 3.658680] Bluetooth: SCO socket layer initialized
[ 3.661750] uvcvideo 1-7:1.0: Entity type for entity Extension 4 was not initialized!
[ 3.661753] uvcvideo 1-7:1.0: Entity type for entity Extension 3 was not initialized!
[ 3.661755] uvcvideo 1-7:1.0: Entity type for entity Processing 2 was not initialized!
[ 3.661757] uvcvideo 1-7:1.0: Entity type for entity Camera 1 was not initialized!
[ 3.662082] input: NCM-G102: NCM-G102 as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/input/input14
[ 3.662378] usbcore: registered new interface driver uvcvideo
[ 3.662380] USB Video Class driver (1.1.1)
[ 3.690995] usbcore: registered new interface driver btusb
[ 3.698225] ipheth 1-2:4.2: Apple iPhone USB Ethernet device attached
[ 3.698799] usbcore: registered new interface driver ipheth
[ 3.702361] ipheth 1-2:4.2 enp0s20u2c4i2: renamed from eth0
[ 3.704867] Bluetooth: hci0: read Intel version: 3707100180012d0d2a
[ 3.704869] Bluetooth: hci0: Intel device is already patched. patch num: 2a
[ 3.728718] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 3.728719] Bluetooth: BNEP filters: protocol multicast
[ 3.728723] Bluetooth: BNEP socket layer initialized
[ 3.741475] IPv6: ADDRCONF(NETDEV_UP): enp0s20u2c4i2: link is not ready
[ 3.843199] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[ 3.847046] iwlwifi 0000:01:00.0 wlp1s0: renamed from wlan0
[ 3.882185] IPv6: ADDRCONF(NETDEV_UP): enp0s20u2c4i2: link is not ready
[ 3.886087] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[ 4.154029] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[ 4.435339] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[ 4.491909] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[ 4.630161] scsi 4:0:0:0: Direct-Access Generic Power Saving USB 0260 PQ: 0 ANSI: 0
[ 4.820017] sd 4:0:0:0: [sdb] 62333952 512-byte logical blocks: (31.9 GB/29.7 GiB)
[ 4.820969] sd 4:0:0:0: [sdb] Write Protect is off
[ 4.820974] sd 4:0:0:0: [sdb] Mode Sense: 0b 00 00 08
[ 4.821993] sd 4:0:0:0: [sdb] No Caching mode page found
[ 4.822008] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 4.842714] sdb: sdb1
[ 4.845760] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[ 5.045698] audit: type=1006 audit(1536885277.880:2): pid=479 uid=0 old-auid=4294967295 auid=977 tty=(none) old-ses=4294967295 ses=1 res=1
[ 9.431183] audit: type=1006 audit(1536885282.264:3): pid=497 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=2 res=1
[ 9.447484] audit: type=1006 audit(1536885282.280:4): pid=499 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=3 res=1
[ 11.191263] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[ 11.195468] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[ 12.401906] haswell-pcm-audio haswell-pcm-audio: FW loaded, mailbox readback FW info: type 01, - version: 00.00, build 77, source commit id: 876ac6906f31a43b6772b23c7c983ce9dcb18a19
[ 12.778744] fuse init (API version 7.27)
[ 14.428034] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[ 14.665069] Bluetooth: RFCOMM TTY layer initialized
[ 14.665076] Bluetooth: RFCOMM socket layer initialized
[ 14.665085] Bluetooth: RFCOMM ver 1.11
[ 17.620764] wlp1s0: authenticate with 16:69:6c:14:65:68
[ 17.627417] wlp1s0: send auth to 16:69:6c:14:65:68 (try 1/3)
[ 17.633073] wlp1s0: authenticated
[ 17.635402] wlp1s0: associate with 16:69:6c:14:65:68 (try 1/3)
[ 17.656340] wlp1s0: RX AssocResp from 16:69:6c:14:65:68 (capab=0x421 status=0 aid=1)
[ 17.666662] wlp1s0: associated
[ 17.668455] IPv6: ADDRCONF(NETDEV_CHANGE): wlp1s0: link becomes ready
[ 32.283789] haswell-pcm-audio haswell-pcm-audio: FW loaded, mailbox readback FW info: type 01, - version: 00.00, build 77, source commit id: 876ac6906f31a43b6772b23c7c983ce9dcb18a19
[ 54.485657] wlp1s0: deauthenticating from 16:69:6c:14:65:68 by local choice (Reason: 3=DEAUTH_LEAVING)
[ 54.498169] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[ 54.520446] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[ 57.707106] wlp1s0: authenticate with 68:db:54:2b:ab:ef
[ 57.712551] wlp1s0: send auth to 68:db:54:2b:ab:ef (try 1/3)
[ 57.721790] wlp1s0: authenticated
[ 57.725057] wlp1s0: associate with 68:db:54:2b:ab:ef (try 1/3)
[ 57.734071] wlp1s0: RX AssocResp from 68:db:54:2b:ab:ef (capab=0x831 status=0 aid=5)
[ 57.736290] wlp1s0: associated
[ 57.858089] IPv6: ADDRCONF(NETDEV_CHANGE): wlp1s0: link becomes ready
[ 1081.246475] haswell-pcm-audio haswell-pcm-audio: FW loaded, mailbox readback FW info: type 01, - version: 00.00, build 77, source commit id: 876ac6906f31a43b6772b23c7c983ce9dcb18a19
[ 1223.352000] haswell-pcm-audio haswell-pcm-audio: FW loaded, mailbox readback FW info: type 01, - version: 00.00, build 77, source commit id: 876ac6906f31a43b6772b23c7c983ce9dcb18a19
[ 2072.061514] haswell-pcm-audio haswell-pcm-audio: FW loaded, mailbox readback FW info: type 01, - version: 00.00, build 77, source commit id: 876ac6906f31a43b6772b23c7c983ce9dcb18a19
[ 2191.034986] wlp1s0: deauthenticating from 68:db:54:2b:ab:ef by local choice (Reason: 3=DEAUTH_LEAVING)
[ 2191.053257] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[ 2191.822897] PM: suspend entry (deep)
[ 2191.822901] PM: Syncing filesystems ... done.
[ 2191.859175] Freezing user space processes ... (elapsed 0.002 seconds) done.
[ 2191.861183] OOM killer disabled.
[ 2191.861183] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 2191.862430] Suspending console(s) (use no_console_suspend to debug)
[ 2191.894685] ipheth 1-2:4.2: Apple iPhone USB Ethernet now disconnected
[ 2191.894737] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 2191.894913] sd 0:0:0:0: [sda] Stopping disk
[ 2192.125921] ACPI: EC: interrupt blocked
[ 2192.162253] ACPI: Preparing to enter system sleep state S3
[ 2192.162353] ACPI: EC: event blocked
[ 2192.162354] ACPI: EC: EC stopped
[ 2192.162356] PM: Saving platform NVS memory
[ 2192.162358] Disabling non-boot CPUs ...
[ 2192.203948] smpboot: CPU 1 is now offline
[ 2192.256237] smpboot: CPU 2 is now offline
[ 2192.296156] smpboot: CPU 3 is now offline
[ 2192.300280] ACPI: Low-level resume complete
[ 2192.300324] ACPI: EC: EC started
[ 2192.300325] PM: Restoring platform NVS memory
[ 2192.302926] Enabling non-boot CPUs ...
[ 2192.302962] x86: Booting SMP configuration:
[ 2192.302963] smpboot: Booting Node 0 Processor 1 APIC 0x1
[ 2192.303744] cache: parent cpu1 should not be sleeping
[ 2192.303893] CPU1 is up
[ 2192.303915] smpboot: Booting Node 0 Processor 2 APIC 0x3
[ 2192.306010] cache: parent cpu2 should not be sleeping
[ 2192.306450] CPU2 is up
[ 2192.306495] smpboot: Booting Node 0 Processor 3 APIC 0x2
[ 2192.308122] cache: parent cpu3 should not be sleeping
[ 2192.308591] CPU3 is up
[ 2192.319827] ACPI: Waking up from system sleep state S3
[ 2192.320058] ACPI: EC: interrupt unblocked
[ 2192.373931] i2c_designware INT3433:00: timeout waiting for bus ready
[ 2192.373942] atmel_mxt_ts i2c-ATML0001:01: __mxt_read_reg: i2c transfer failed (-110)
[ 2192.373945] atmel_mxt_ts i2c-ATML0001:01: Failed to read T44 and T5 (-110)
[ 2192.397123] i2c_designware INT3433:00: timeout waiting for bus ready
[ 2192.397133] atmel_mxt_ts i2c-ATML0001:01: __mxt_read_reg: i2c transfer failed (-110)
[ 2192.397136] atmel_mxt_ts i2c-ATML0001:01: Failed to read T44 and T5 (-110)
[ 2192.434245] ACPI: EC: event unblocked
[ 2192.444475] sd 0:0:0:0: [sda] Starting disk
[ 2192.674024] usb 1-4: reset high-speed USB device number 3 using xhci_hcd
[ 2192.933615] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2192.937104] usb 1-7: reset high-speed USB device number 4 using xhci_hcd
[ 2192.960768] ata1.00: configured for UDMA/133
[ 2193.403837] i2c_designware INT3433:00: controller timed out
[ 2193.403860] atmel_mxt_ts i2c-ATML0001:01: __mxt_read_reg: i2c transfer failed (-110)
[ 2193.403863] atmel_mxt_ts i2c-ATML0001:01: Failed to read T44 and T5 (-110)
[ 2195.252826] haswell-pcm-audio haswell-pcm-audio: no context buffer need to restore!
[ 2195.252828] haswell-pcm-audio haswell-pcm-audio: no context buffer need to restore!
[ 2195.255275] haswell-pcm-audio haswell-pcm-audio: FW loaded, mailbox readback FW info: type 01, - version: 00.00, build 77, source commit id: 876ac6906f31a43b6772b23c7c983ce9dcb18a19
[ 2195.255520] OOM killer enabled.
[ 2195.255521] Restarting tasks ...
[ 2195.255590] usb 1-2: USB disconnect, device number 2
[ 2195.260662] done.
[ 2195.262175] PM: suspend exit
[ 2195.282231] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[ 2195.468018] sdb: sdb1
[ 2195.549228] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[ 2195.832138] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[ 2195.883048] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[ 2199.171753] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[ 2202.427480] wlp1s0: authenticate with 68:db:54:2b:ab:ef
[ 2202.432272] wlp1s0: send auth to 68:db:54:2b:ab:ef (try 1/3)
[ 2202.441511] wlp1s0: authenticated
[ 2202.443697] wlp1s0: associate with 68:db:54:2b:ab:ef (try 1/3)
[ 2202.452568] wlp1s0: RX AssocResp from 68:db:54:2b:ab:ef (capab=0x831 status=0 aid=3)
[ 2202.454123] wlp1s0: associated
[ 2202.555845] IPv6: ADDRCONF(NETDEV_CHANGE): wlp1s0: link becomes ready
[ 2531.869312] haswell-pcm-audio haswell-pcm-audio: FW loaded, mailbox readback FW info: type 01, - version: 00.00, build 77, source commit id: 876ac6906f31a43b6772b23c7c983ce9dcb18a19
[ 3063.613683] usb 1-2: new high-speed USB device number 6 using xhci_hcd
[ 3063.755499] usb 1-2: New USB device found, idVendor=05ac, idProduct=12a8, bcdDevice= 8.04
[ 3063.755506] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3063.755509] usb 1-2: Product: iPhone
[ 3063.755513] usb 1-2: Manufacturer: Apple Inc.
[ 3063.755517] usb 1-2: SerialNumber: 207e0296b2f401141189d7525ef925b5894981ec
[ 3064.117250] ipheth 1-2:4.2: Apple iPhone USB Ethernet device attached
[ 3064.128009] ipheth 1-2:4.2 enp0s20u2c4i2: renamed from eth0
[ 3064.146000] IPv6: ADDRCONF(NETDEV_UP): enp0s20u2c4i2: link is not ready
[ 3064.147096] IPv6: ADDRCONF(NETDEV_UP): enp0s20u2c4i2: link is not ready
[ 3556.237550] haswell-pcm-audio haswell-pcm-audio: FW loaded, mailbox readback FW info: type 01, - version: 00.00, build 77, source commit id: 876ac6906f31a43b6772b23c7c983ce9dcb18a19
[ 3840.606155] wlp1s0: deauthenticating from 68:db:54:2b:ab:ef by local choice (Reason: 3=DEAUTH_LEAVING)
[ 3840.640341] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[ 3841.363019] PM: suspend entry (deep)
[ 3841.363021] PM: Syncing filesystems ... done.
[ 3841.424196] Freezing user space processes ... (elapsed 0.001 seconds) done.
[ 3841.426126] OOM killer disabled.
[ 3841.426127] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 3841.427311] Suspending console(s) (use no_console_suspend to debug)
[ 3841.446613] ipheth 1-2:4.2: Apple iPhone USB Ethernet now disconnected
[ 3841.450054] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 3841.450335] sd 0:0:0:0: [sda] Stopping disk
[ 3841.681323] ACPI: EC: interrupt blocked
[ 3841.717625] ACPI: Preparing to enter system sleep state S3
[ 3841.717735] ACPI: EC: event blocked
[ 3841.717736] ACPI: EC: EC stopped
[ 3841.717738] PM: Saving platform NVS memory
[ 3841.717740] Disabling non-boot CPUs ...
[ 3841.765985] smpboot: CPU 1 is now offline
[ 3841.804899] smpboot: CPU 2 is now offline
[ 3841.854828] smpboot: CPU 3 is now offline
[ 3841.858693] ACPI: Low-level resume complete
[ 3841.858737] ACPI: EC: EC started
[ 3841.858737] PM: Restoring platform NVS memory
[ 3841.861337] Enabling non-boot CPUs ...
[ 3841.861372] x86: Booting SMP configuration:
[ 3841.861373] smpboot: Booting Node 0 Processor 1 APIC 0x1
[ 3841.862138] cache: parent cpu1 should not be sleeping
[ 3841.862316] CPU1 is up
[ 3841.862338] smpboot: Booting Node 0 Processor 2 APIC 0x3
[ 3841.864232] cache: parent cpu2 should not be sleeping
[ 3841.864410] CPU2 is up
[ 3841.864429] smpboot: Booting Node 0 Processor 3 APIC 0x2
[ 3841.865073] cache: parent cpu3 should not be sleeping
[ 3841.865252] CPU3 is up
[ 3841.869344] ACPI: Waking up from system sleep state S3
[ 3841.869555] ACPI: EC: interrupt unblocked
[ 3841.925804] i2c_designware INT3433:00: timeout waiting for bus ready
[ 3841.925814] atmel_mxt_ts i2c-ATML0001:01: __mxt_read_reg: i2c transfer failed (-110)
[ 3841.925817] atmel_mxt_ts i2c-ATML0001:01: Failed to read T44 and T5 (-110)
[ 3841.949037] i2c_designware INT3433:00: timeout waiting for bus ready
[ 3841.949048] atmel_mxt_ts i2c-ATML0001:01: __mxt_read_reg: i2c transfer failed (-110)
[ 3841.949051] atmel_mxt_ts i2c-ATML0001:01: Failed to read T44 and T5 (-110)
[ 3841.986212] ACPI: EC: event unblocked
[ 3841.996595] sd 0:0:0:0: [sda] Starting disk
[ 3842.226058] usb 1-4: reset high-speed USB device number 3 using xhci_hcd
[ 3842.482320] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 3842.489151] usb 1-7: reset high-speed USB device number 4 using xhci_hcd
[ 3842.545547] ata1.00: configured for UDMA/133
[ 3842.979154] i2c_designware INT3433:00: controller timed out
[ 3842.979169] atmel_mxt_ts i2c-ATML0001:01: __mxt_read_reg: i2c transfer failed (-110)
[ 3842.979170] atmel_mxt_ts i2c-ATML0001:01: Failed to read T44 and T5 (-110)
[ 3844.791191] haswell-pcm-audio haswell-pcm-audio: no context buffer need to restore!
[ 3844.791193] haswell-pcm-audio haswell-pcm-audio: no context buffer need to restore!
[ 3844.793603] haswell-pcm-audio haswell-pcm-audio: FW loaded, mailbox readback FW info: type 01, - version: 00.00, build 77, source commit id: 876ac6906f31a43b6772b23c7c983ce9dcb18a19
[ 3844.793863] OOM killer enabled.
[ 3844.793864] Restarting tasks ... done.
[ 3844.806322] usb 1-2: USB disconnect, device number 6
[ 3844.812522] PM: suspend exit
[ 3844.822929] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[ 3845.006382] sdb: sdb1
[ 3845.069753] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[ 3845.350388] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[ 3845.448130] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[ 3848.651831] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[ 3851.824930] wlp1s0: authenticate with 68:db:54:2b:ab:ef
[ 3851.831058] wlp1s0: send auth to 68:db:54:2b:ab:ef (try 1/3)
[ 3851.840277] wlp1s0: authenticated
[ 3851.842333] wlp1s0: associate with 68:db:54:2b:ab:ef (try 1/3)
[ 3851.851221] wlp1s0: RX AssocResp from 68:db:54:2b:ab:ef (capab=0x831 status=0 aid=1)
[ 3851.852675] wlp1s0: associated
[ 3851.961577] IPv6: ADDRCONF(NETDEV_CHANGE): wlp1s0: link becomes ready
[ 3860.643322] NET: Registered protocol family 38
[ 3860.665164] hidraw: raw HID events driver (C) Jiri Kosina
[ 3861.518021] input: Designer Mouse Mouse as /devices/virtual/misc/uhid/0005:045E:0805.0001/input/input15
[ 3861.518121] hid-generic 0005:045E:0805.0001: input,hidraw0: BLUETOOTH HID v1.20 Mouse [Designer Mouse] on 6C:29:95:7C:A9:06
[ 4555.175915] perf: interrupt took too long (2532 > 2500), lowering kernel.perf_event_max_sample_rate to 78900
[ 5464.392318] perf: interrupt took too long (3194 > 3165), lowering kernel.perf_event_max_sample_rate to 62400
[ 6511.809165] perf: interrupt took too long (4011 > 3992), lowering kernel.perf_event_max_sample_rate to 49800
[ 6517.042946] haswell-pcm-audio haswell-pcm-audio: FW loaded, mailbox readback FW info: type 01, - version: 00.00, build 77, source commit id: 876ac6906f31a43b6772b23c7c983ce9dcb18a19
[ 6722.357939] haswell-pcm-audio haswell-pcm-audio: FW loaded, mailbox readback FW info: type 01, - version: 00.00, build 77, source commit id: 876ac6906f31a43b6772b23c7c983ce9dcb18a19
[ 7177.783584] wlp1s0: deauthenticating from 68:db:54:2b:ab:ef by local choice (Reason: 3=DEAUTH_LEAVING)
[ 7177.814191] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[ 7178.695340] PM: suspend entry (deep)
[ 7178.695343] PM: Syncing filesystems ... done.
[ 7178.729184] Freezing user space processes ... (elapsed 0.002 seconds) done.
[ 7178.731480] OOM killer disabled.
[ 7178.731481] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 7178.732774] Suspending console(s) (use no_console_suspend to debug)
[ 7178.748374] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 7178.748499] sd 0:0:0:0: [sda] Stopping disk
[ 7178.986174] ACPI: EC: interrupt blocked
[ 7179.019271] ACPI: Preparing to enter system sleep state S3
[ 7179.019386] ACPI: EC: event blocked
[ 7179.019388] ACPI: EC: EC stopped
[ 7179.019390] PM: Saving platform NVS memory
[ 7179.019392] Disabling non-boot CPUs ...
[ 7179.047600] smpboot: CPU 1 is now offline
[ 7179.086553] smpboot: CPU 2 is now offline
[ 7179.126465] smpboot: CPU 3 is now offline
[ 7179.130129] ACPI: Low-level resume complete
[ 7179.130173] ACPI: EC: EC started
[ 7179.130173] PM: Restoring platform NVS memory
[ 7179.132795] Enabling non-boot CPUs ...
[ 7179.132831] x86: Booting SMP configuration:
[ 7179.132832] smpboot: Booting Node 0 Processor 1 APIC 0x1
[ 7179.133587] cache: parent cpu1 should not be sleeping
[ 7179.133735] CPU1 is up
[ 7179.133760] smpboot: Booting Node 0 Processor 2 APIC 0x3
[ 7179.135747] cache: parent cpu2 should not be sleeping
[ 7179.135917] CPU2 is up
[ 7179.135937] smpboot: Booting Node 0 Processor 3 APIC 0x2
[ 7179.136581] cache: parent cpu3 should not be sleeping
[ 7179.136764] CPU3 is up
[ 7179.140821] ACPI: Waking up from system sleep state S3
[ 7179.141050] ACPI: EC: interrupt unblocked
[ 7179.197476] i2c_designware INT3433:00: timeout waiting for bus ready
[ 7179.197486] atmel_mxt_ts i2c-ATML0001:01: __mxt_read_reg: i2c transfer failed (-110)
[ 7179.197489] atmel_mxt_ts i2c-ATML0001:01: Failed to read T44 and T5 (-110)
[ 7179.220752] i2c_designware INT3433:00: timeout waiting for bus ready
[ 7179.220764] atmel_mxt_ts i2c-ATML0001:01: __mxt_read_reg: i2c transfer failed (-110)
[ 7179.220767] atmel_mxt_ts i2c-ATML0001:01: Failed to read T44 and T5 (-110)
[ 7179.257997] ACPI: EC: event unblocked
[ 7179.258427] ACPI: button: The lid device is not compliant to SW_LID.
[ 7179.268273] sd 0:0:0:0: [sda] Starting disk
[ 7179.497631] usb 1-4: reset high-speed USB device number 3 using xhci_hcd
[ 7179.760779] usb 1-7: reset high-speed USB device number 4 using xhci_hcd
[ 7179.810671] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 7179.817740] ata1.00: configured for UDMA/133
[ 7180.234128] i2c_designware INT3433:00: controller timed out
[ 7180.234142] atmel_mxt_ts i2c-ATML0001:01: __mxt_read_reg: i2c transfer failed (-110)
[ 7180.234144] atmel_mxt_ts i2c-ATML0001:01: Failed to read T44 and T5 (-110)
[ 7180.265490] haswell-pcm-audio haswell-pcm-audio: no context buffer need to restore!
[ 7180.265492] haswell-pcm-audio haswell-pcm-audio: no context buffer need to restore!
[ 7180.267936] haswell-pcm-audio haswell-pcm-audio: FW loaded, mailbox readback FW info: type 01, - version: 00.00, build 77, source commit id: 876ac6906f31a43b6772b23c7c983ce9dcb18a19
[ 7180.268187] OOM killer enabled.
[ 7180.268188] Restarting tasks ... done.
[ 7180.274422] PM: suspend exit
[ 7180.284586] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[ 7180.485008] sdb: sdb1
[ 7180.543396] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[ 7180.626548] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[ 7183.998425] wlp1s0: authenticate with 68:db:54:2b:ab:ef
[ 7184.003208] wlp1s0: send auth to 68:db:54:2b:ab:ef (try 1/3)
[ 7184.012267] wlp1s0: authenticated
[ 7184.013981] wlp1s0: associate with 68:db:54:2b:ab:ef (try 1/3)
[ 7184.022908] wlp1s0: RX AssocResp from 68:db:54:2b:ab:ef (capab=0x831 status=0 aid=1)
[ 7184.024679] wlp1s0: associated
[ 7184.126152] IPv6: ADDRCONF(NETDEV_CHANGE): wlp1s0: link becomes ready
[ 8880.686929] perf: interrupt took too long (5026 > 5013), lowering kernel.perf_event_max_sample_rate to 39600
[ 9411.967616] wlp1s0: deauthenticating from 68:db:54:2b:ab:ef by local choice (Reason: 3=DEAUTH_LEAVING)
[ 9411.988800] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[ 9412.757028] PM: suspend entry (deep)
[ 9412.757030] PM: Syncing filesystems ... done.
[ 9412.803174] Freezing user space processes ... (elapsed 0.009 seconds) done.
[ 9412.812531] OOM killer disabled.
[ 9412.812532] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 9412.813588] Suspending console(s) (use no_console_suspend to debug)
[ 9412.836932] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 9412.837175] sd 0:0:0:0: [sda] Stopping disk
[ 9413.077944] ACPI: EC: interrupt blocked
[ 9413.111143] ACPI: Preparing to enter system sleep state S3
[ 9413.111262] ACPI: EC: event blocked
[ 9413.111263] ACPI: EC: EC stopped
[ 9413.111265] PM: Saving platform NVS memory
[ 9413.111267] Disabling non-boot CPUs ...
[ 9413.156173] smpboot: CPU 1 is now offline
[ 9413.195089] smpboot: CPU 2 is now offline
[ 9413.221680] smpboot: CPU 3 is now offline
[ 9413.225249] ACPI: Low-level resume complete
[ 9413.225293] ACPI: EC: EC started
[ 9413.225294] PM: Restoring platform NVS memory
[ 9413.227932] Enabling non-boot CPUs ...
[ 9413.227967] x86: Booting SMP configuration:
[ 9413.227968] smpboot: Booting Node 0 Processor 1 APIC 0x1
[ 9413.228617] cache: parent cpu1 should not be sleeping
[ 9413.228765] CPU1 is up
[ 9413.228788] smpboot: Booting Node 0 Processor 2 APIC 0x3
[ 9413.230984] cache: parent cpu2 should not be sleeping
[ 9413.231435] CPU2 is up
[ 9413.231485] smpboot: Booting Node 0 Processor 3 APIC 0x2
[ 9413.233070] cache: parent cpu3 should not be sleeping
[ 9413.233539] CPU3 is up
[ 9413.244775] ACPI: Waking up from system sleep state S3
[ 9413.245003] ACPI: EC: interrupt unblocked
[ 9413.299481] i2c_designware INT3433:00: timeout waiting for bus ready
[ 9413.299493] atmel_mxt_ts i2c-ATML0001:01: __mxt_read_reg: i2c transfer failed (-110)
[ 9413.299496] atmel_mxt_ts i2c-ATML0001:01: Failed to read T44 and T5 (-110)
[ 9413.359826] ACPI: EC: event unblocked
[ 9413.370021] sd 0:0:0:0: [sda] Starting disk
[ 9413.599657] usb 1-4: reset high-speed USB device number 3 using xhci_hcd
[ 9413.852529] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 9413.862667] usb 1-7: reset high-speed USB device number 4 using xhci_hcd
[ 9413.900913] ata1.00: configured for UDMA/133
[ 9414.342705] i2c_designware INT3433:00: controller timed out
[ 9414.342718] atmel_mxt_ts i2c-ATML0001:01: __mxt_read_reg: i2c transfer failed (-110)
[ 9414.342720] atmel_mxt_ts i2c-ATML0001:01: Failed to read T44 and T5 (-110)
[ 9414.373445] haswell-pcm-audio haswell-pcm-audio: no context buffer need to restore!
[ 9414.373446] haswell-pcm-audio haswell-pcm-audio: no context buffer need to restore!
[ 9414.375820] haswell-pcm-audio haswell-pcm-audio: FW loaded, mailbox readback FW info: type 01, - version: 00.00, build 77, source commit id: 876ac6906f31a43b6772b23c7c983ce9dcb18a19
[ 9414.376094] OOM killer enabled.
[ 9414.376095] Restarting tasks ... done.
[ 9414.384142] PM: suspend exit
[ 9414.390196] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[ 9414.593947] sdb: sdb1
[ 9414.660939] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[ 9414.736116] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[ 9414.767555] PM: suspend entry (deep)
[ 9414.767557] PM: Syncing filesystems ... done.
[ 9414.797029] Freezing user space processes ... (elapsed 0.015 seconds) done.
[ 9414.812967] OOM killer disabled.
[ 9414.812968] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 9414.814349] Suspending console(s) (use no_console_suspend to debug)
[ 9414.859290] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 9414.859480] sd 0:0:0:0: [sda] Stopping disk
[ 9415.086985] ACPI: EC: interrupt blocked
[ 9415.120196] ACPI: Preparing to enter system sleep state S3
[ 9415.120296] ACPI: EC: event blocked
[ 9415.120297] ACPI: EC: EC stopped
[ 9415.120299] PM: Saving platform NVS memory
[ 9415.120301] Disabling non-boot CPUs ...
[ 9415.175283] smpboot: CPU 1 is now offline
[ 9415.224165] smpboot: CPU 2 is now offline
[ 9415.264075] smpboot: CPU 3 is now offline
[ 9415.267136] ACPI: Low-level resume complete
[ 9415.267179] ACPI: EC: EC started
[ 9415.267180] PM: Restoring platform NVS memory
[ 9415.269783] Enabling non-boot CPUs ...
[ 9415.269818] x86: Booting SMP configuration:
[ 9415.269819] smpboot: Booting Node 0 Processor 1 APIC 0x1
[ 9415.270589] cache: parent cpu1 should not be sleeping
[ 9415.270736] CPU1 is up
[ 9415.270759] smpboot: Booting Node 0 Processor 2 APIC 0x3
[ 9415.273010] cache: parent cpu2 should not be sleeping
[ 9415.273459] CPU2 is up
[ 9415.273510] smpboot: Booting Node 0 Processor 3 APIC 0x2
[ 9415.275158] cache: parent cpu3 should not be sleeping
[ 9415.275621] CPU3 is up
[ 9415.286863] ACPI: Waking up from system sleep state S3
[ 9415.287074] ACPI: EC: interrupt unblocked
[ 9415.341957] i2c_designware INT3433:00: timeout waiting for bus ready
[ 9415.341970] atmel_mxt_ts i2c-ATML0001:01: __mxt_read_reg: i2c transfer failed (-110)
[ 9415.341974] atmel_mxt_ts i2c-ATML0001:01: Failed to read T44 and T5 (-110)
[ 9415.402539] ACPI: EC: event unblocked
[ 9415.412627] sd 0:0:0:0: [sda] Starting disk
[ 9415.645318] usb 1-4: reset high-speed USB device number 3 using xhci_hcd
[ 9415.894916] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 9415.908393] usb 1-7: reset high-speed USB device number 4 using xhci_hcd
[ 9415.943854] ata1.00: configured for UDMA/133
[ 9416.371778] i2c_designware INT3433:00: controller timed out
[ 9416.371816] atmel_mxt_ts i2c-ATML0001:01: __mxt_read_reg: i2c transfer failed (-110)
[ 9416.371820] atmel_mxt_ts i2c-ATML0001:01: Failed to read T44 and T5 (-110)
[ 9416.407079] haswell-pcm-audio haswell-pcm-audio: FW loaded, mailbox readback FW info: type 01, - version: 00.00, build 77, source commit id: 876ac6906f31a43b6772b23c7c983ce9dcb18a19
[ 9416.407313] OOM killer enabled.
[ 9416.407314] Restarting tasks ... done.
[ 9416.417759] PM: suspend exit
[ 9416.430922] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[ 9416.607710] sd 4:0:0:0: [sdb] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 9416.607722] sd 4:0:0:0: [sdb] tag#0 Sense Key : Unit Attention [current]
[ 9416.607731] sd 4:0:0:0: [sdb] tag#0 Add. Sense: Not ready to ready change, medium may have changed
[ 9416.607743] sd 4:0:0:0: [sdb] tag#0 CDB: Read(10) 28 00 00 00 10 00 00 00 08 00
[ 9416.607751] print_req_error: I/O error, dev sdb, sector 4096
[ 9416.636917] sdb: sdb1
[ 9416.703624] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[ 9416.753556] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[ 9420.165736] wlp1s0: authenticate with 68:db:54:2b:ab:ef
[ 9420.170733] wlp1s0: send auth to 68:db:54:2b:ab:ef (try 1/3)
[ 9420.179968] wlp1s0: authenticated
[ 9420.181562] wlp1s0: associate with 68:db:54:2b:ab:ef (try 1/3)
[ 9420.190447] wlp1s0: RX AssocResp from 68:db:54:2b:ab:ef (capab=0x831 status=0 aid=1)
[ 9420.192052] wlp1s0: associated
[ 9420.293763] IPv6: ADDRCONF(NETDEV_CHANGE): wlp1s0: link becomes ready
[10016.472654] wlp1s0: deauthenticating from 68:db:54:2b:ab:ef by local choice (Reason: 3=DEAUTH_LEAVING)
[10016.489740] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[10016.516554] PM: suspend entry (deep)
[10016.516556] PM: Syncing filesystems ... done.
[10016.548765] Freezing user space processes ... (elapsed 0.019 seconds) done.
[10016.568511] OOM killer disabled.
[10016.568512] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[10016.569786] Suspending console(s) (use no_console_suspend to debug)
[10016.601566] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[10016.601774] sd 0:0:0:0: [sda] Stopping disk
[10016.702723] ACPI: EC: interrupt blocked
[10016.735785] ACPI: Preparing to enter system sleep state S3
[10016.735903] ACPI: EC: event blocked
[10016.735904] ACPI: EC: EC stopped
[10016.735906] PM: Saving platform NVS memory
[10016.735908] Disabling non-boot CPUs ...
[10016.790864] smpboot: CPU 1 is now offline
[10016.840749] smpboot: CPU 2 is now offline
[10016.869679] smpboot: CPU 3 is now offline
[10016.873286] ACPI: Low-level resume complete
[10016.873330] ACPI: EC: EC started
[10016.873331] PM: Restoring platform NVS memory
[10016.875967] Enabling non-boot CPUs ...
[10016.876003] x86: Booting SMP configuration:
[10016.876004] smpboot: Booting Node 0 Processor 1 APIC 0x1
[10016.876762] cache: parent cpu1 should not be sleeping
[10016.876910] CPU1 is up
[10016.876933] smpboot: Booting Node 0 Processor 2 APIC 0x3
[10016.879131] cache: parent cpu2 should not be sleeping
[10016.879577] CPU2 is up
[10016.879630] smpboot: Booting Node 0 Processor 3 APIC 0x2
[10016.881215] cache: parent cpu3 should not be sleeping
[10016.881700] CPU3 is up
[10016.892947] ACPI: Waking up from system sleep state S3
[10016.893178] ACPI: EC: interrupt unblocked
[10016.947441] i2c_designware INT3433:00: timeout waiting for bus ready
[10016.947453] atmel_mxt_ts i2c-ATML0001:01: __mxt_read_reg: i2c transfer failed (-110)
[10016.947456] atmel_mxt_ts i2c-ATML0001:01: Failed to read T44 and T5 (-110)
[10016.976936] i2c_designware INT3433:00: timeout waiting for bus ready
[10016.976948] atmel_mxt_ts i2c-ATML0001:01: __mxt_read_reg: i2c transfer failed (-110)
[10016.976951] atmel_mxt_ts i2c-ATML0001:01: Failed to read T44 and T5 (-110)
[10017.011182] ACPI: EC: event unblocked
[10017.021509] sd 0:0:0:0: [sda] Starting disk
[10017.257456] usb 1-7: reset high-speed USB device number 4 using xhci_hcd
[10017.520801] usb 1-4: reset high-speed USB device number 3 using xhci_hcd
[10017.560575] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[10017.561225] ata1.00: configured for UDMA/133
[10018.000699] i2c_designware INT3433:00: controller timed out
[10018.000722] atmel_mxt_ts i2c-ATML0001:01: __mxt_read_reg: i2c transfer failed (-110)
[10018.000726] atmel_mxt_ts i2c-ATML0001:01: Failed to read T44 and T5 (-110)
[10018.032310] haswell-pcm-audio haswell-pcm-audio: no context buffer need to restore!
[10018.032311] haswell-pcm-audio haswell-pcm-audio: no context buffer need to restore!
[10018.034755] haswell-pcm-audio haswell-pcm-audio: FW loaded, mailbox readback FW info: type 01, - version: 00.00, build 77, source commit id: 876ac6906f31a43b6772b23c7c983ce9dcb18a19
[10018.034992] OOM killer enabled.
[10018.034993] Restarting tasks ... done.
[10018.052520] PM: suspend exit
[10018.079468] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[10018.354198] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[10018.395716] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[10018.748518] sdb: sdb1
[10021.669544] wlp1s0: authenticate with 68:db:54:2b:ab:ef
[10021.674964] wlp1s0: send auth to 68:db:54:2b:ab:ef (try 1/3)
[10021.684552] wlp1s0: authenticated
[10021.687175] wlp1s0: associate with 68:db:54:2b:ab:ef (try 1/3)
[10021.696048] wlp1s0: RX AssocResp from 68:db:54:2b:ab:ef (capab=0x831 status=0 aid=1)
[10021.697633] wlp1s0: associated
[10021.797769] IPv6: ADDRCONF(NETDEV_CHANGE): wlp1s0: link becomes ready
[10618.529175] wlp1s0: deauthenticating from 68:db:54:2b:ab:ef by local choice (Reason: 3=DEAUTH_LEAVING)
[10618.557106] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[10618.607284] PM: suspend entry (deep)
[10618.607286] PM: Syncing filesystems ... done.
[10618.657809] Freezing user space processes ... (elapsed 0.002 seconds) done.
[10618.660006] OOM killer disabled.
[10618.660007] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[10618.661211] Suspending console(s) (use no_console_suspend to debug)
[10618.723918] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[10618.724095] sd 0:0:0:0: [sda] Stopping disk
[10618.995052] ACPI: EC: interrupt blocked
[10619.028054] ACPI: Preparing to enter system sleep state S3
[10619.028172] ACPI: EC: event blocked
[10619.028174] ACPI: EC: EC stopped
[10619.028176] PM: Saving platform NVS memory
[10619.028178] Disabling non-boot CPUs ...
[10619.056392] smpboot: CPU 1 is now offline
[10619.099248] smpboot: CPU 2 is now offline
[10619.148554] smpboot: CPU 3 is now offline
[10619.152171] ACPI: Low-level resume complete
[10619.152215] ACPI: EC: EC started
[10619.152215] PM: Restoring platform NVS memory
[10619.154809] Enabling non-boot CPUs ...
[10619.154845] x86: Booting SMP configuration:
[10619.154846] smpboot: Booting Node 0 Processor 1 APIC 0x1
[10619.155606] cache: parent cpu1 should not be sleeping
[10619.155756] CPU1 is up
[10619.155778] smpboot: Booting Node 0 Processor 2 APIC 0x3
[10619.157968] cache: parent cpu2 should not be sleeping
[10619.158417] CPU2 is up
[10619.158468] smpboot: Booting Node 0 Processor 3 APIC 0x2
[10619.160055] cache: parent cpu3 should not be sleeping
[10619.160513] CPU3 is up
[10619.171754] ACPI: Waking up from system sleep state S3
[10619.171980] ACPI: EC: interrupt unblocked
[10619.226204] i2c_designware INT3433:00: timeout waiting for bus ready
[10619.226214] atmel_mxt_ts i2c-ATML0001:01: __mxt_read_reg: i2c transfer failed (-110)
[10619.226217] atmel_mxt_ts i2c-ATML0001:01: Failed to read T44 and T5 (-110)
[10619.286685] ACPI: EC: event unblocked
[10619.296842] sd 0:0:0:0: [sda] Starting disk
[10619.546474] usb 1-4: reset high-speed USB device number 3 using xhci_hcd
[10619.779414] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[10619.809551] usb 1-7: reset high-speed USB device number 4 using xhci_hcd
[10619.818232] ata1.00: configured for UDMA/133
[10620.269606] i2c_designware INT3433:00: controller timed out
[10620.269628] atmel_mxt_ts i2c-ATML0001:01: __mxt_read_reg: i2c transfer failed (-110)
[10620.269631] atmel_mxt_ts i2c-ATML0001:01: Failed to read T44 and T5 (-110)
[10620.304776] haswell-pcm-audio haswell-pcm-audio: FW loaded, mailbox readback FW info: type 01, - version: 00.00, build 77, source commit id: 876ac6906f31a43b6772b23c7c983ce9dcb18a19
[10620.305005] OOM killer enabled.
[10620.305006] Restarting tasks ... done.
[10620.310139] PM: suspend exit
[10620.322726] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[10620.593193] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[10620.774273] sdb: sdb1
[10620.885648] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[10620.939559] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[10624.230999] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[10627.386785] wlp1s0: authenticate with 68:db:54:2b:ab:ef
[10627.391061] wlp1s0: send auth to 68:db:54:2b:ab:ef (try 1/3)
[10627.400516] wlp1s0: authenticated
[10627.402717] wlp1s0: associate with 68:db:54:2b:ab:ef (try 1/3)
[10627.411778] wlp1s0: RX AssocResp from 68:db:54:2b:ab:ef (capab=0x831 status=0 aid=1)
[10627.413187] wlp1s0: associated
[10627.513173] IPv6: ADDRCONF(NETDEV_CHANGE): wlp1s0: link becomes ready
[11272.893797] wlp1s0: deauthenticating from 68:db:54:2b:ab:ef by local choice (Reason: 3=DEAUTH_LEAVING)
[11272.906122] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[11272.932044] PM: suspend entry (deep)
[11272.932046] PM: Syncing filesystems ... done.
[11272.972990] Freezing user space processes ... (elapsed 0.013 seconds) done.
[11272.986348] OOM killer disabled.
[11272.986349] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[11272.987734] Suspending console(s) (use no_console_suspend to debug)
[11273.019401] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[11273.019566] sd 0:0:0:0: [sda] Stopping disk
[11273.120554] ACPI: EC: interrupt blocked
[11273.156947] ACPI: Preparing to enter system sleep state S3
[11273.157059] ACPI: EC: event blocked
[11273.157060] ACPI: EC: EC stopped
[11273.157062] PM: Saving platform NVS memory
[11273.157064] Disabling non-boot CPUs ...
[11273.208692] smpboot: CPU 1 is now offline
[11273.247600] smpboot: CPU 2 is now offline
[11273.284110] smpboot: CPU 3 is now offline
[11273.287747] ACPI: Low-level resume complete
[11273.287791] ACPI: EC: EC started
[11273.287792] PM: Restoring platform NVS memory
[11273.290498] Enabling non-boot CPUs ...
[11273.290578] x86: Booting SMP configuration:
[11273.290581] smpboot: Booting Node 0 Processor 1 APIC 0x1
[11273.292441] cache: parent cpu1 should not be sleeping
[11273.292826] CPU1 is up
[11273.292883] smpboot: Booting Node 0 Processor 2 APIC 0x3
[11273.298374] cache: parent cpu2 should not be sleeping
[11273.298830] CPU2 is up
[11273.298881] smpboot: Booting Node 0 Processor 3 APIC 0x2
[11273.300459] cache: parent cpu3 should not be sleeping
[11273.300921] CPU3 is up
[11273.312171] ACPI: Waking up from system sleep state S3
[11273.312399] ACPI: EC: interrupt unblocked
[11273.368660] i2c_designware INT3433:00: timeout waiting for bus ready
[11273.368673] atmel_mxt_ts i2c-ATML0001:01: __mxt_read_reg: i2c transfer failed (-110)
[11273.368676] atmel_mxt_ts i2c-ATML0001:01: Failed to read T44 and T5 (-110)
[11273.428974] ACPI: EC: event unblocked
[11273.439271] sd 0:0:0:0: [sda] Starting disk
[11273.668707] usb 1-7: reset high-speed USB device number 4 using xhci_hcd
[11273.921713] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[11273.931904] usb 1-4: reset high-speed USB device number 3 using xhci_hcd
[11273.959250] ata1.00: configured for UDMA/133
[11274.405174] i2c_designware INT3433:00: controller timed out
[11274.405193] atmel_mxt_ts i2c-ATML0001:01: __mxt_read_reg: i2c transfer failed (-110)
[11274.405196] atmel_mxt_ts i2c-ATML0001:01: Failed to read T44 and T5 (-110)
[11274.435474] haswell-pcm-audio haswell-pcm-audio: no context buffer need to restore!
[11274.435476] haswell-pcm-audio haswell-pcm-audio: no context buffer need to restore!
[11274.437914] haswell-pcm-audio haswell-pcm-audio: FW loaded, mailbox readback FW info: type 01, - version: 00.00, build 77, source commit id: 876ac6906f31a43b6772b23c7c983ce9dcb18a19
[11274.438191] OOM killer enabled.
[11274.438192] Restarting tasks ... done.
[11274.454502] PM: suspend exit
[11274.473506] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[11274.652118] sdb: sdb1
[11274.736005] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[11274.784583] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[11278.108088] wlp1s0: authenticate with 68:db:54:2b:ab:ef
[11278.113112] wlp1s0: send auth to 68:db:54:2b:ab:ef (try 1/3)
[11278.122180] wlp1s0: authenticated
[11278.125002] wlp1s0: associate with 68:db:54:2b:ab:ef (try 1/3)
[11278.133885] wlp1s0: RX AssocResp from 68:db:54:2b:ab:ef (capab=0x831 status=0 aid=1)
[11278.135396] wlp1s0: associated
[11278.234541] IPv6: ADDRCONF(NETDEV_CHANGE): wlp1s0: link becomes ready
[12113.883280] wlp1s0: deauthenticating from 68:db:54:2b:ab:ef by local choice (Reason: 3=DEAUTH_LEAVING)
[12113.899047] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[12113.925824] PM: suspend entry (deep)
[12113.925826] PM: Syncing filesystems ... done.
[12113.955699] Freezing user space processes ... (elapsed 0.022 seconds) done.
[12113.978509] OOM killer disabled.
[12113.978510] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[12113.979966] Suspending console(s) (use no_console_suspend to debug)
[12114.058284] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[12114.058586] sd 0:0:0:0: [sda] Stopping disk
[12114.142898] ACPI: EC: interrupt blocked
[12114.175826] ACPI: Preparing to enter system sleep state S3
[12114.175943] ACPI: EC: event blocked
[12114.175945] ACPI: EC: EC stopped
[12114.175946] PM: Saving platform NVS memory
[12114.175949] Disabling non-boot CPUs ...
[12114.224195] smpboot: CPU 1 is now offline
[12114.263144] smpboot: CPU 2 is now offline
[12114.303010] smpboot: CPU 3 is now offline
[12114.306573] ACPI: Low-level resume complete
[12114.306616] ACPI: EC: EC started
[12114.306617] PM: Restoring platform NVS memory
[12114.309257] Enabling non-boot CPUs ...
[12114.309293] x86: Booting SMP configuration:
[12114.309294] smpboot: Booting Node 0 Processor 1 APIC 0x1
[12114.310043] cache: parent cpu1 should not be sleeping
[12114.310195] CPU1 is up
[12114.310218] smpboot: Booting Node 0 Processor 2 APIC 0x3
[12114.312411] cache: parent cpu2 should not be sleeping
[12114.312869] CPU2 is up
[12114.312920] smpboot: Booting Node 0 Processor 3 APIC 0x2
[12114.314407] cache: parent cpu3 should not be sleeping
[12114.314887] CPU3 is up
[12114.326135] ACPI: Waking up from system sleep state S3
[12114.326362] ACPI: EC: interrupt unblocked
[12114.380809] i2c_designware INT3433:00: timeout waiting for bus ready
[12114.380819] atmel_mxt_ts i2c-ATML0001:01: __mxt_read_reg: i2c transfer failed (-110)
[12114.380823] atmel_mxt_ts i2c-ATML0001:01: Failed to read T44 and T5 (-110)
[12114.404007] i2c_designware INT3433:00: timeout waiting for bus ready
[12114.404018] atmel_mxt_ts i2c-ATML0001:01: __mxt_read_reg: i2c transfer failed (-110)
[12114.404021] atmel_mxt_ts i2c-ATML0001:01: Failed to read T44 and T5 (-110)
[12114.441360] ACPI: EC: event unblocked
[12114.451503] sd 0:0:0:0: [sda] Starting disk
[12114.680842] usb 1-4: reset high-speed USB device number 3 using xhci_hcd
[12114.873890] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[12114.916006] ata1.00: configured for UDMA/133
[12114.944326] usb 1-7: reset high-speed USB device number 4 using xhci_hcd
[12115.420712] i2c_designware INT3433:00: controller timed out
[12115.420737] atmel_mxt_ts i2c-ATML0001:01: __mxt_read_reg: i2c transfer failed (-110)
[12115.420740] atmel_mxt_ts i2c-ATML0001:01: Failed to read T44 and T5 (-110)
[12115.455886] haswell-pcm-audio haswell-pcm-audio: FW loaded, mailbox readback FW info: type 01, - version: 00.00, build 77, source commit id: 876ac6906f31a43b6772b23c7c983ce9dcb18a19
[12115.456154] OOM killer enabled.
[12115.456155] Restarting tasks ... done.
[12115.468765] PM: suspend exit
[12115.491095] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[12115.713750] sdb: sdb1
[12115.756099] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[12115.812472] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[12119.124389] wlp1s0: authenticate with 68:db:54:2b:ab:ef
[12119.128487] wlp1s0: send auth to 68:db:54:2b:ab:ef (try 1/3)
[12119.137188] wlp1s0: authenticated
[12119.140499] wlp1s0: associate with 68:db:54:2b:ab:ef (try 1/3)
[12119.149583] wlp1s0: RX AssocResp from 68:db:54:2b:ab:ef (capab=0x831 status=0 aid=1)
[12119.151106] wlp1s0: associated
[12119.251620] IPv6: ADDRCONF(NETDEV_CHANGE): wlp1s0: link becomes ready
[12715.935027] wlp1s0: deauthenticating from 68:db:54:2b:ab:ef by local choice (Reason: 3=DEAUTH_LEAVING)
[12715.949521] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[12715.978336] PM: suspend entry (deep)
[12715.978338] PM: Syncing filesystems ... done.
[12716.003589] Freezing user space processes ... (elapsed 0.001 seconds) done.
[12716.005541] OOM killer disabled.
[12716.005541] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[12716.006741] Suspending console(s) (use no_console_suspend to debug)
[12716.073878] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[12716.074150] sd 0:0:0:0: [sda] Stopping disk
[12716.328341] ACPI: EC: interrupt blocked
[12716.364727] ACPI: Preparing to enter system sleep state S3
[12716.364828] ACPI: EC: event blocked
[12716.364829] ACPI: EC: EC stopped
[12716.364831] PM: Saving platform NVS memory
[12716.364833] Disabling non-boot CPUs ...
[12716.412084] smpboot: CPU 1 is now offline
[12716.462015] smpboot: CPU 2 is now offline
[12716.495257] smpboot: CPU 3 is now offline
[12716.498770] ACPI: Low-level resume complete
[12716.498814] ACPI: EC: EC started
[12716.498814] PM: Restoring platform NVS memory
[12716.501443] Enabling non-boot CPUs ...
[12716.501479] x86: Booting SMP configuration:
[12716.501480] smpboot: Booting Node 0 Processor 1 APIC 0x1
[12716.502223] cache: parent cpu1 should not be sleeping
[12716.502369] CPU1 is up
[12716.502393] smpboot: Booting Node 0 Processor 2 APIC 0x3
[12716.504378] cache: parent cpu2 should not be sleeping
[12716.504550] CPU2 is up
[12716.504571] smpboot: Booting Node 0 Processor 3 APIC 0x2
[12716.505212] cache: parent cpu3 should not be sleeping
[12716.505390] CPU3 is up
[12716.509471] ACPI: Waking up from system sleep state S3
[12716.509955] ACPI: EC: interrupt unblocked
[12716.566686] i2c_designware INT3433:00: timeout waiting for bus ready
[12716.566699] atmel_mxt_ts i2c-ATML0001:01: __mxt_read_reg: i2c transfer failed (-110)
[12716.566703] atmel_mxt_ts i2c-ATML0001:01: Failed to read T44 and T5 (-110)
[12716.589971] i2c_designware INT3433:00: timeout waiting for bus ready
[12716.589984] atmel_mxt_ts i2c-ATML0001:01: __mxt_read_reg: i2c transfer failed (-110)
[12716.589987] atmel_mxt_ts i2c-ATML0001:01: Failed to read T44 and T5 (-110)
[12716.626934] ACPI: EC: event unblocked
[12716.637210] sd 0:0:0:0: [sda] Starting disk
[12716.866466] usb 1-4: reset high-speed USB device number 3 using xhci_hcd
[12717.129583] usb 1-7: reset high-speed USB device number 4 using xhci_hcd
[12717.176142] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[12717.191496] ata1.00: configured for UDMA/133
[12717.609628] i2c_designware INT3433:00: controller timed out
[12717.609645] atmel_mxt_ts i2c-ATML0001:01: __mxt_read_reg: i2c transfer failed (-110)
[12717.609647] atmel_mxt_ts i2c-ATML0001:01: Failed to read T44 and T5 (-110)
[12717.643941] haswell-pcm-audio haswell-pcm-audio: FW loaded, mailbox readback FW info: type 01, - version: 00.00, build 77, source commit id: 876ac6906f31a43b6772b23c7c983ce9dcb18a19
[12717.644208] OOM killer enabled.
[12717.644209] Restarting tasks ... done.
[12717.660805] PM: suspend exit
[12717.718897] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[12717.866671] sdb: sdb1
[12717.979906] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[12718.050106] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[12721.368314] wlp1s0: authenticate with 68:db:54:2b:ab:ef
[12721.372886] wlp1s0: send auth to 68:db:54:2b:ab:ef (try 1/3)
[12721.381613] wlp1s0: authenticated
[12721.382758] wlp1s0: associate with 68:db:54:2b:ab:ef (try 1/3)
[12721.391665] wlp1s0: RX AssocResp from 68:db:54:2b:ab:ef (capab=0x831 status=0 aid=1)
[12721.393375] wlp1s0: associated
[12721.493761] IPv6: ADDRCONF(NETDEV_CHANGE): wlp1s0: link becomes ready
[13317.697084] wlp1s0: deauthenticating from 68:db:54:2b:ab:ef by local choice (Reason: 3=DEAUTH_LEAVING)
[13317.722719] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[13317.753794] PM: suspend entry (deep)
[13317.753796] PM: Syncing filesystems ... done.
[13317.778301] Freezing user space processes ... (elapsed 0.014 seconds) done.
[13317.792860] OOM killer disabled.
[13317.792861] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[13317.794148] Suspending console(s) (use no_console_suspend to debug)
[13317.846155] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[13317.846346] sd 0:0:0:0: [sda] Stopping disk
[13318.097054] ACPI: EC: interrupt blocked
[13318.130312] ACPI: Preparing to enter system sleep state S3
[13318.130430] ACPI: EC: event blocked
[13318.130431] ACPI: EC: EC stopped
[13318.130433] PM: Saving platform NVS memory
[13318.130435] Disabling non-boot CPUs ...
[13318.175388] smpboot: CPU 1 is now offline
[13318.214295] smpboot: CPU 2 is now offline
[13318.244196] smpboot: CPU 3 is now offline
[13318.247699] ACPI: Low-level resume complete
[13318.247742] ACPI: EC: EC started
[13318.247743] PM: Restoring platform NVS memory
[13318.250364] Enabling non-boot CPUs ...
[13318.250401] x86: Booting SMP configuration:
[13318.250402] smpboot: Booting Node 0 Processor 1 APIC 0x1
[13318.251055] cache: parent cpu1 should not be sleeping
[13318.251204] CPU1 is up
[13318.251227] smpboot: Booting Node 0 Processor 2 APIC 0x3
[13318.253431] cache: parent cpu2 should not be sleeping
[13318.253878] CPU2 is up
[13318.253930] smpboot: Booting Node 0 Processor 3 APIC 0x2
[13318.255527] cache: parent cpu3 should not be sleeping
[13318.255993] CPU3 is up
[13318.267232] ACPI: Waking up from system sleep state S3
[13318.267447] ACPI: EC: interrupt unblocked
[13318.321811] i2c_designware INT3433:00: timeout waiting for bus ready
[13318.321821] atmel_mxt_ts i2c-ATML0001:01: __mxt_read_reg: i2c transfer failed (-110)
[13318.321824] atmel_mxt_ts i2c-ATML0001:01: Failed to read T44 and T5 (-110)
[13318.346972] i2c_designware INT3433:00: timeout waiting for bus ready
[13318.346981] atmel_mxt_ts i2c-ATML0001:01: __mxt_read_reg: i2c transfer failed (-110)
[13318.346983] atmel_mxt_ts i2c-ATML0001:01: Failed to read T44 and T5 (-110)
[13318.382242] ACPI: EC: event unblocked
[13318.392545] sd 0:0:0:0: [sda] Starting disk
[13318.622066] usb 1-7: reset high-speed USB device number 4 using xhci_hcd
[13318.875009] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[13318.885178] usb 1-4: reset high-speed USB device number 3 using xhci_hcd
[13318.921332] ata1.00: configured for UDMA/133
[13319.371888] i2c_designware INT3433:00: controller timed out
[13319.371907] atmel_mxt_ts i2c-ATML0001:01: __mxt_read_reg: i2c transfer failed (-110)
[13319.371910] atmel_mxt_ts i2c-ATML0001:01: Failed to read T44 and T5 (-110)
[13319.406957] haswell-pcm-audio haswell-pcm-audio: FW loaded, mailbox readback FW info: type 01, - version: 00.00, build 77, source commit id: 876ac6906f31a43b6772b23c7c983ce9dcb18a19
[13319.407215] OOM killer enabled.
[13319.407216] Restarting tasks ... done.
[13319.419859] PM: suspend exit
[13319.436263] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[13319.702911] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[13319.777279] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[13319.882841] sdb: sdb1
[13323.115828] wlp1s0: authenticate with 68:db:54:2b:ab:ef
[13323.119578] wlp1s0: send auth to 68:db:54:2b:ab:ef (try 1/3)
[13323.128552] wlp1s0: authenticated
[13323.135010] wlp1s0: associate with 68:db:54:2b:ab:ef (try 1/3)
[13323.144319] wlp1s0: RX AssocResp from 68:db:54:2b:ab:ef (capab=0x831 status=0 aid=1)
[13323.156840] wlp1s0: associated
[13323.244700] IPv6: ADDRCONF(NETDEV_CHANGE): wlp1s0: link becomes ready
[13571.544034] perf: interrupt took too long (6355 > 6282), lowering kernel.perf_event_max_sample_rate to 31200
[13919.482196] wlp1s0: deauthenticating from 68:db:54:2b:ab:ef by local choice (Reason: 3=DEAUTH_LEAVING)
[13919.498808] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[13919.524966] PM: suspend entry (deep)
[13919.524968] PM: Syncing filesystems ... done.
[13919.547801] Freezing user space processes ... (elapsed 0.002 seconds) done.
[13919.550051] OOM killer disabled.
[13919.550052] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[13919.551391] Suspending console(s) (use no_console_suspend to debug)
[13919.614985] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[13919.615183] sd 0:0:0:0: [sda] Stopping disk
[13919.695298] pci_pm_suspend(): hcd_pci_suspend+0x0/0x30 [usbcore] returns -16
[13919.695311] dpm_run_callback(): pci_pm_suspend+0x0/0x120 returns -16
[13919.695317] PM: Device 0000:00:14.0 failed to suspend async: error -16
[13919.855419] PM: Some devices failed to suspend, or early wake event detected
[13919.865783] sd 0:0:0:0: [sda] Starting disk
[13920.179196] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[13920.180321] ata1.00: configured for UDMA/133
[13920.913789] haswell-pcm-audio haswell-pcm-audio: FW loaded, mailbox readback FW info: type 01, - version: 00.00, build 77, source commit id: 876ac6906f31a43b6772b23c7c983ce9dcb18a19
[13920.914117] OOM killer enabled.
[13920.914118] Restarting tasks ... done.
[13920.930205] PM: suspend exit
[13920.930292] PM: suspend entry (shallow)
[13920.930295] PM: Syncing filesystems ... done.
[13920.955763] Freezing user space processes ... (elapsed 0.008 seconds) done.
[13920.964501] OOM killer disabled.
[13920.964502] Freezing remaining freezable tasks ... (elapsed 0.144 seconds) done.
[13921.108676] Suspending console(s) (use no_console_suspend to debug)
[13921.151898] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[13921.152052] sd 0:0:0:0: [sda] Stopping disk
[13923.893780] tpm tpm0: TPM savestate took 2600ms
[13923.928635] pci_pm_suspend(): hcd_pci_suspend+0x0/0x30 [usbcore] returns -16
[13923.928649] dpm_run_callback(): pci_pm_suspend+0x0/0x120 returns -16
[13923.928655] PM: Device 0000:00:14.0 failed to suspend async: error -16
[13924.074273] PM: Some devices failed to suspend, or early wake event detected
[13924.084681] sd 0:0:0:0: [sda] Starting disk
[13924.399395] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[13924.400612] ata1.00: configured for UDMA/133
[13925.153719] haswell-pcm-audio haswell-pcm-audio: FW loaded, mailbox readback FW info: type 01, - version: 00.00, build 77, source commit id: 876ac6906f31a43b6772b23c7c983ce9dcb18a19
[13925.153951] OOM killer enabled.
[13925.153952] Restarting tasks ... done.
[13925.172346] PM: suspend exit
[13925.172394] PM: suspend entry (s2idle)
[13925.172395] PM: Syncing filesystems ... done.
[13925.192751] Freezing user space processes ...
[13925.364053] sdb: sdb1
[13925.368551] (elapsed 0.175 seconds) done.
[13925.368560] OOM killer disabled.
[13925.368561] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[13925.369971] Suspending console(s) (use no_console_suspend to debug)
[13925.408470] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[13925.408615] sd 0:0:0:0: [sda] Stopping disk
[13928.881557] tpm tpm0: TPM savestate took 3300ms
[13928.882536] pci_pm_suspend(): hcd_pci_suspend+0x0/0x30 [usbcore] returns -16
[13928.882549] dpm_run_callback(): pci_pm_suspend+0x0/0x120 returns -16
[13928.882555] PM: Device 0000:00:14.0 failed to suspend async: error -16
[13929.047613] PM: Some devices failed to suspend, or early wake event detected
[13929.058031] sd 0:0:0:0: [sda] Starting disk
[13929.372788] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[13929.373831] ata1.00: configured for UDMA/133
[13930.113159] haswell-pcm-audio haswell-pcm-audio: FW loaded, mailbox readback FW info: type 01, - version: 00.00, build 77, source commit id: 876ac6906f31a43b6772b23c7c983ce9dcb18a19
[13930.113368] OOM killer enabled.
[13930.113369] Restarting tasks ... done.
[13930.126018] PM: suspend exit
[13930.139140] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[13930.331421] sdb: sdb1
[13930.408806] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[13930.464390] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[13933.731894] wlp1s0: authenticate with 68:db:54:2b:ab:ef
[13933.736021] wlp1s0: send auth to 68:db:54:2b:ab:ef (try 1/3)
[13933.744886] wlp1s0: authenticated
[13933.748220] wlp1s0: associate with 68:db:54:2b:ab:ef (try 1/3)
[13933.757577] wlp1s0: RX AssocResp from 68:db:54:2b:ab:ef (capab=0x831 status=0 aid=1)
[13933.759230] wlp1s0: associated
[13933.860013] IPv6: ADDRCONF(NETDEV_CHANGE): wlp1s0: link becomes ready
[14530.297806] wlp1s0: deauthenticating from 68:db:54:2b:ab:ef by local choice (Reason: 3=DEAUTH_LEAVING)
[14530.312481] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[14530.343181] PM: suspend entry (deep)
[14530.343183] PM: Syncing filesystems ... done.
[14530.375321] Freezing user space processes ... (elapsed 0.013 seconds) done.
[14530.388433] OOM killer disabled.
[14530.388434] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[14530.389658] Suspending console(s) (use no_console_suspend to debug)
[14530.441549] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[14530.441712] sd 0:0:0:0: [sda] Stopping disk
[14534.854656] tpm tpm0: TPM savestate took 4200ms
[14535.072641] ACPI: EC: interrupt blocked
[14535.105775] ACPI: Preparing to enter system sleep state S3
[14535.105890] ACPI: EC: event blocked
[14535.105892] ACPI: EC: EC stopped
[14535.105893] PM: Saving platform NVS memory
[14535.105896] Disabling non-boot CPUs ...
[14535.147460] smpboot: CPU 1 is now offline
[14535.189735] smpboot: CPU 2 is now offline
[14535.229622] smpboot: CPU 3 is now offline
[14535.233277] ACPI: Low-level resume complete
[14535.233321] ACPI: EC: EC started
[14535.233322] PM: Restoring platform NVS memory
[14535.235933] Enabling non-boot CPUs ...
[14535.235970] x86: Booting SMP configuration:
[14535.235971] smpboot: Booting Node 0 Processor 1 APIC 0x1
[14535.236623] cache: parent cpu1 should not be sleeping
[14535.236772] CPU1 is up
[14535.236796] smpboot: Booting Node 0 Processor 2 APIC 0x3
[14535.238980] cache: parent cpu2 should not be sleeping
[14535.239437] CPU2 is up
[14535.239487] smpboot: Booting Node 0 Processor 3 APIC 0x2
[14535.241069] cache: parent cpu3 should not be sleeping
[14535.241548] CPU3 is up
[14535.252787] ACPI: Waking up from system sleep state S3
[14535.252995] ACPI: EC: interrupt unblocked
[14535.307491] i2c_designware INT3433:00: timeout waiting for bus ready
[14535.307504] atmel_mxt_ts i2c-ATML0001:01: __mxt_read_reg: i2c transfer failed (-110)
[14535.307507] atmel_mxt_ts i2c-ATML0001:01: Failed to read T44 and T5 (-110)
[14535.331087] i2c_designware INT3433:00: timeout waiting for bus ready
[14535.331098] atmel_mxt_ts i2c-ATML0001:01: __mxt_read_reg: i2c transfer failed (-110)
[14535.331102] atmel_mxt_ts i2c-ATML0001:01: Failed to read T44 and T5 (-110)
[14535.368113] ACPI: EC: event unblocked
[14535.378002] sd 0:0:0:0: [sda] Starting disk
[14535.607508] usb 1-4: reset high-speed USB device number 3 using xhci_hcd
[14535.803863] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[14535.870620] usb 1-7: reset high-speed USB device number 4 using xhci_hcd
[14535.894273] ata1.00: configured for UDMA/133
[14536.360648] i2c_designware INT3433:00: controller timed out
[14536.360662] atmel_mxt_ts i2c-ATML0001:01: __mxt_read_reg: i2c transfer failed (-110)
[14536.360663] atmel_mxt_ts i2c-ATML0001:01: Failed to read T44 and T5 (-110)
[14536.394620] haswell-pcm-audio haswell-pcm-audio: FW loaded, mailbox readback FW info: type 01, - version: 00.00, build 77, source commit id: 876ac6906f31a43b6772b23c7c983ce9dcb18a19
[14536.394861] OOM killer enabled.
[14536.394862] Restarting tasks ... done.
[14536.416600] PM: suspend exit
[14536.434422] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[14536.613626] sdb: sdb1
[14536.713245] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[14536.999964] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[14537.039835] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[14540.406964] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[14543.739648] wlp1s0: authenticate with 68:db:54:2b:ab:ef
[14543.745354] wlp1s0: send auth to 68:db:54:2b:ab:ef (try 1/3)
[14543.759256] wlp1s0: authenticated
[14543.760607] wlp1s0: associate with 68:db:54:2b:ab:ef (try 1/3)
[14543.769547] wlp1s0: RX AssocResp from 68:db:54:2b:ab:ef (capab=0x831 status=0 aid=1)
[14543.770992] wlp1s0: associated
[14543.873329] IPv6: ADDRCONF(NETDEV_CHANGE): wlp1s0: link becomes ready
[14681.800501] usb 2-1: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd
[14681.817754] usb 2-1: New USB device found, idVendor=1058, idProduct=25ea, bcdDevice=40.04
[14681.817759] usb 2-1: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[14681.817762] usb 2-1: Product: My Passport 25EA
[14681.817765] usb 2-1: Manufacturer: Western Digital
[14681.817767] usb 2-1: SerialNumber: 575846314134374658344839
[14681.819171] usb-storage 2-1:1.0: USB Mass Storage device detected
[14681.819470] scsi host5: usb-storage 2-1:1.0
[14682.840969] scsi 5:0:0:0: Direct-Access WD My Passport 25EA 4004 PQ: 0 ANSI: 6
[14682.841234] scsi 5:0:0:1: Enclosure WD SES Device 4004 PQ: 0 ANSI: 6
[14682.843239] sd 5:0:0:0: [sdc] Spinning up disk...
[14682.864743] scsi 5:0:0:1: Wrong diagnostic page; asked for 1 got 8
[14682.864747] scsi 5:0:0:1: Failed to get diagnostic page 0x1
[14682.864749] scsi 5:0:0:1: Failed to bind enclosure -19
[14682.864769] ses 5:0:0:1: Attached Enclosure device
[14683.853791] ......ready
[14688.924232] sd 5:0:0:0: [sdc] 3906963456 512-byte logical blocks: (2.00 TB/1.82 TiB)
[14688.924450] sd 5:0:0:0: [sdc] Write Protect is off
[14688.924455] sd 5:0:0:0: [sdc] Mode Sense: 47 00 10 08
[14688.924667] sd 5:0:0:0: [sdc] No Caching mode page found
[14688.924677] sd 5:0:0:0: [sdc] Assuming drive cache: write through
[14689.105062] sdc: sdc1 sdc2
[14689.106369] sd 5:0:0:0: [sdc] Attached SCSI disk
[14693.504991] ntfs: driver 2.1.32 [Flags: R/W MODULE].
[14693.604801] ntfs: volume version 3.1.
[14693.609064] ntfs: (device sdc2): load_system_files(): $LogFile is not clean. Mounting read-only. Mount in Windows.
[14695.314703] haswell-pcm-audio haswell-pcm-audio: FW loaded, mailbox readback FW info: type 01, - version: 00.00, build 77, source commit id: 876ac6906f31a43b6772b23c7c983ce9dcb18a19
[14699.290682] FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[14699.357727] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
[14766.827836] haswell-pcm-audio haswell-pcm-audio: FW loaded, mailbox readback FW info: type 01, - version: 00.00, build 77, source commit id: 876ac6906f31a43b6772b23c7c983ce9dcb18a19
[14795.054358] haswell-pcm-audio haswell-pcm-audio: FW loaded, mailbox readback FW info: type 01, - version: 00.00, build 77, source commit id: 876ac6906f31a43b6772b23c7c983ce9dcb18a19
[15119.792835] haswell-pcm-audio haswell-pcm-audio: FW loaded, mailbox readback FW info: type 01, - version: 00.00, build 77, source commit id: 876ac6906f31a43b6772b23c7c983ce9dcb18a19
[15170.014038] haswell-pcm-audio haswell-pcm-audio: FW loaded, mailbox readback FW info: type 01, - version: 00.00, build 77, source commit id: 876ac6906f31a43b6772b23c7c983ce9dcb18a19
[15502.543222] haswell-pcm-audio haswell-pcm-audio: FW loaded, mailbox readback FW info: type 01, - version: 00.00, build 77, source commit id: 876ac6906f31a43b6772b23c7c983ce9dcb18a19
[15611.635749] haswell-pcm-audio haswell-pcm-audio: FW loaded, mailbox readback FW info: type 01, - version: 00.00, build 77, source commit id: 876ac6906f31a43b6772b23c7c983ce9dcb18a19
[16079.377388] haswell-pcm-audio haswell-pcm-audio: FW loaded, mailbox readback FW info: type 01, - version: 00.00, build 77, source commit id: 876ac6906f31a43b6772b23c7c983ce9dcb18a19
[16663.456987] haswell-pcm-audio haswell-pcm-audio: FW loaded, mailbox readback FW info: type 01, - version: 00.00, build 77, source commit id: 876ac6906f31a43b6772b23c7c983ce9dcb18a19
[16815.386678] haswell-pcm-audio haswell-pcm-audio: error: audio DSP boot timeout IPCD 0x0 IPCX 0x0
[16815.693350] haswell-pcm-audio haswell-pcm-audio: ipc: --message timeout-- ipcx 0x83000000 isr 0x00000000 ipcd 0x00000000 imrx 0x7fff0000
[16815.693359] haswell-pcm-audio haswell-pcm-audio: error: stream commit failed
[16815.693363] System PCM: error: failed to commit stream -110
[16815.693369] haswell-pcm-audio haswell-pcm-audio: ASoC: haswell-pcm-audio hw params failed: -110
[16815.693375] System PCM: ASoC: hw_params FE failed -110
[16816.013322] haswell-pcm-audio haswell-pcm-audio: ipc: --message timeout-- ipcx 0x83000000 isr 0x00000000 ipcd 0x00000000 imrx 0x7fff0000
[16816.013336] haswell-pcm-audio haswell-pcm-audio: error: stream commit failed
[16816.013345] System PCM: error: failed to commit stream -110
[16816.013355] haswell-pcm-audio haswell-pcm-audio: ASoC: haswell-pcm-audio hw params failed: -110
[16816.013365] System PCM: ASoC: hw_params FE failed -110
[16816.333320] haswell-pcm-audio haswell-pcm-audio: ipc: --message timeout-- ipcx 0x83000000 isr 0x00000000 ipcd 0x00000000 imrx 0x7fff0000
[16816.333329] haswell-pcm-audio haswell-pcm-audio: error: stream commit failed
[16816.333333] System PCM: error: failed to commit stream -110
[16816.333338] haswell-pcm-audio haswell-pcm-audio: ASoC: haswell-pcm-audio hw params failed: -110
[16816.333346] System PCM: ASoC: hw_params FE failed -110
[16816.653304] haswell-pcm-audio haswell-pcm-audio: ipc: --message timeout-- ipcx 0x83000000 isr 0x00000000 ipcd 0x00000000 imrx 0x7fff0000
[16816.653317] haswell-pcm-audio haswell-pcm-audio: error: stream commit failed
[16816.653324] System PCM: error: failed to commit stream -110
[16816.653332] haswell-pcm-audio haswell-pcm-audio: ASoC: haswell-pcm-audio hw params failed: -110
[16816.653339] System PCM: ASoC: hw_params FE failed -110
[16816.973342] haswell-pcm-audio haswell-pcm-audio: ipc: --message timeout-- ipcx 0x83000000 isr 0x00000000 ipcd 0x00000000 imrx 0x7fff0000
[16816.973354] haswell-pcm-audio haswell-pcm-audio: error: stream commit failed
[16816.973361] System PCM: error: failed to commit stream -110
[16816.973369] haswell-pcm-audio haswell-pcm-audio: ASoC: haswell-pcm-audio hw params failed: -110
[16816.973377] System PCM: ASoC: hw_params FE failed -110
[16817.296852] haswell-pcm-audio haswell-pcm-audio: ipc: --message timeout-- ipcx 0x83000000 isr 0x00000000 ipcd 0x00000000 imrx 0x7fff0000
[16817.296862] haswell-pcm-audio haswell-pcm-audio: error: stream commit failed
[16817.296867] System PCM: error: failed to commit stream -110
[16817.296873] haswell-pcm-audio haswell-pcm-audio: ASoC: haswell-pcm-audio hw params failed: -110
[16817.296880] System PCM: ASoC: hw_params FE failed -110
[16817.613546] haswell-pcm-audio haswell-pcm-audio: ipc: --message timeout-- ipcx 0x83000000 isr 0x00000000 ipcd 0x00000000 imrx 0x7fff0000
[16817.613561] haswell-pcm-audio haswell-pcm-audio: error: stream commit failed
[16817.613582] System PCM: error: failed to commit stream -110
[16817.613590] haswell-pcm-audio haswell-pcm-audio: ASoC: haswell-pcm-audio hw params failed: -110
[16817.613598] System PCM: ASoC: hw_params FE failed -110
[16817.936634] haswell-pcm-audio haswell-pcm-audio: ipc: --message timeout-- ipcx 0x83000000 isr 0x00000000 ipcd 0x00000000 imrx 0x7fff0000
[16817.936647] haswell-pcm-audio haswell-pcm-audio: error: stream commit failed
[16817.936654] System PCM: error: failed to commit stream -110
[16817.936660] haswell-pcm-audio haswell-pcm-audio: ASoC: haswell-pcm-audio hw params failed: -110
[16817.936666] System PCM: ASoC: hw_params FE failed -110
[16818.253281] haswell-pcm-audio haswell-pcm-audio: ipc: --message timeout-- ipcx 0x83000000 isr 0x00000000 ipcd 0x00000000 imrx 0x7fff0000
[16818.253295] haswell-pcm-audio haswell-pcm-audio: error: stream commit failed
[16818.253298] System PCM: error: failed to commit stream -110
[16818.253300] haswell-pcm-audio haswell-pcm-audio: ASoC: haswell-pcm-audio hw params failed: -110
[16818.253303] System PCM: ASoC: hw_params FE failed -110
[16818.576642] haswell-pcm-audio haswell-pcm-audio: ipc: --message timeout-- ipcx 0x83000000 isr 0x00000000 ipcd 0x00000000 imrx 0x7fff0000
[16818.576652] haswell-pcm-audio haswell-pcm-audio: error: stream commit failed
[16818.576659] System PCM: error: failed to commit stream -110
[16818.576665] haswell-pcm-audio haswell-pcm-audio: ASoC: haswell-pcm-audio hw params failed: -110
[16818.576671] System PCM: ASoC: hw_params FE failed -110
[16818.893366] haswell-pcm-audio haswell-pcm-audio: ipc: --message timeout-- ipcx 0x83000000 isr 0x00000000 ipcd 0x00000000 imrx 0x7fff0000
[16818.893378] haswell-pcm-audio haswell-pcm-audio: error: stream commit failed
[16818.893385] System PCM: error: failed to commit stream -110
[16818.893393] haswell-pcm-audio haswell-pcm-audio: ASoC: haswell-pcm-audio hw params failed: -110
[16818.893401] System PCM: ASoC: hw_params FE failed -110
[16819.213508] haswell-pcm-audio haswell-pcm-audio: ipc: --message timeout-- ipcx 0x83000000 isr 0x00000000 ipcd 0x00000000 imrx 0x7fff0000
[16819.213521] haswell-pcm-audio haswell-pcm-audio: error: stream commit failed
[16819.213528] System PCM: error: failed to commit stream -110
[16819.213534] haswell-pcm-audio haswell-pcm-audio: ASoC: haswell-pcm-audio hw params failed: -110
[16819.213541] System PCM: ASoC: hw_params FE failed -110
[16819.533296] haswell-pcm-audio haswell-pcm-audio: ipc: --message timeout-- ipcx 0x83000000 isr 0x00000000 ipcd 0x00000000 imrx 0x7fff0000
[16819.533301] haswell-pcm-audio haswell-pcm-audio: error: stream commit failed
[16819.533307] System PCM: error: failed to commit stream -110
[16819.533311] haswell-pcm-audio haswell-pcm-audio: ASoC: haswell-pcm-audio hw params failed: -110
[16819.533315] System PCM: ASoC: hw_params FE failed -110
[16819.853288] haswell-pcm-audio haswell-pcm-audio: ipc: --message timeout-- ipcx 0x83000000 isr 0x00000000 ipcd 0x00000000 imrx 0x7fff0000
[16819.853292] haswell-pcm-audio haswell-pcm-audio: error: stream commit failed
[16819.853295] System PCM: error: failed to commit stream -110
[16819.853297] haswell-pcm-audio haswell-pcm-audio: ASoC: haswell-pcm-audio hw params failed: -110
[16819.853300] System PCM: ASoC: hw_params FE failed -110
[16820.173321] haswell-pcm-audio haswell-pcm-audio: ipc: --message timeout-- ipcx 0x83000000 isr 0x00000000 ipcd 0x00000000 imrx 0x7fff0000
[16820.173335] haswell-pcm-audio haswell-pcm-audio: error: stream commit failed
[16820.173345] System PCM: error: failed to commit stream -110
[16820.173354] haswell-pcm-audio haswell-pcm-audio: ASoC: haswell-pcm-audio hw params failed: -110
[16820.173363] System PCM: ASoC: hw_params FE failed -110
[16820.496651] haswell-pcm-audio haswell-pcm-audio: ipc: --message timeout-- ipcx 0x83000000 isr 0x00000000 ipcd 0x00000000 imrx 0x7fff0000
[16820.496660] haswell-pcm-audio haswell-pcm-audio: error: stream commit failed
[16820.496665] System PCM: error: failed to commit stream -110
[16820.496671] haswell-pcm-audio haswell-pcm-audio: ASoC: haswell-pcm-audio hw params failed: -110
[16820.496676] System PCM: ASoC: hw_params FE failed -110
[16820.813361] haswell-pcm-audio haswell-pcm-audio: ipc: --message timeout-- ipcx 0x83000000 isr 0x00000000 ipcd 0x00000000 imrx 0x7fff0000
[16820.813373] haswell-pcm-audio haswell-pcm-audio: error: stream commit failed
[16820.813380] System PCM: error: failed to commit stream -110
[16820.813388] haswell-pcm-audio haswell-pcm-audio: ASoC: haswell-pcm-audio hw params failed: -110
[16820.813396] System PCM: ASoC: hw_params FE failed -110
[16821.133530] haswell-pcm-audio haswell-pcm-audio: ipc: --message timeout-- ipcx 0x83000000 isr 0x00000000 ipcd 0x00000000 imrx 0x7fff0000
[16821.133541] haswell-pcm-audio haswell-pcm-audio: error: stream commit failed
[16821.133564] System PCM: error: failed to commit stream -110
[16821.133571] haswell-pcm-audio haswell-pcm-audio: ASoC: haswell-pcm-audio hw params failed: -110
[16821.133578] System PCM: ASoC: hw_params FE failed -110
[16821.453356] haswell-pcm-audio haswell-pcm-audio: ipc: --message timeout-- ipcx 0x83000000 isr 0x00000000 ipcd 0x00000000 imrx 0x7fff0000
[16821.453368] haswell-pcm-audio haswell-pcm-audio: error: stream commit failed
[16821.453376] System PCM: error: failed to commit stream -110
[16821.453383] haswell-pcm-audio haswell-pcm-audio: ASoC: haswell-pcm-audio hw params failed: -110
[16821.453391] System PCM: ASoC: hw_params FE failed -110
[16821.776647] haswell-pcm-audio haswell-pcm-audio: ipc: --message timeout-- ipcx 0x83000000 isr 0x00000000 ipcd 0x00000000 imrx 0x7fff0000
[16821.776659] haswell-pcm-audio haswell-pcm-audio: error: stream commit failed
[16821.776666] System PCM: error: failed to commit stream -110
[16821.776674] haswell-pcm-audio haswell-pcm-audio: ASoC: haswell-pcm-audio hw params failed: -110
[16821.776682] System PCM: ASoC: hw_params FE failed -110
[16822.093345] haswell-pcm-audio haswell-pcm-audio: ipc: --message timeout-- ipcx 0x83000000 isr 0x00000000 ipcd 0x00000000 imrx 0x7fff0000
[16822.093353] haswell-pcm-audio haswell-pcm-audio: error: stream commit failed
[16822.093358] System PCM: error: failed to commit stream -110
[16822.093363] haswell-pcm-audio haswell-pcm-audio: ASoC: haswell-pcm-audio hw params failed: -110
[16822.093375] System PCM: ASoC: hw_params FE failed -110
[16822.413526] haswell-pcm-audio haswell-pcm-audio: ipc: --message timeout-- ipcx 0x83000000 isr 0x00000000 ipcd 0x00000000 imrx 0x7fff0000
[16822.413537] haswell-pcm-audio haswell-pcm-audio: error: stream commit failed
[16822.413544] System PCM: error: failed to commit stream -110
[16822.413550] haswell-pcm-audio haswell-pcm-audio: ASoC: haswell-pcm-audio hw params failed: -110
[16822.413557] System PCM: ASoC: hw_params FE failed -110
[16822.733363] haswell-pcm-audio haswell-pcm-audio: ipc: --message timeout-- ipcx 0x83000000 isr 0x00000000 ipcd 0x00000000 imrx 0x7fff0000
[16822.733377] haswell-pcm-audio haswell-pcm-audio: error: stream commit failed
[16822.733384] System PCM: error: failed to commit stream -110
[16822.733392] haswell-pcm-audio haswell-pcm-audio: ASoC: haswell-pcm-audio hw params failed: -110
[16822.733400] System PCM: ASoC: hw_params FE failed -110
[16823.053288] haswell-pcm-audio haswell-pcm-audio: ipc: --message timeout-- ipcx 0x83000000 isr 0x00000000 ipcd 0x00000000 imrx 0x7fff0000
[16823.053294] haswell-pcm-audio haswell-pcm-audio: error: stream commit failed
[16823.053298] System PCM: error: failed to commit stream -110
[16823.053301] haswell-pcm-audio haswell-pcm-audio: ASoC: haswell-pcm-audio hw params failed: -110
[16823.053306] System PCM: ASoC: hw_params FE failed -110
[16823.376642] haswell-pcm-audio haswell-pcm-audio: ipc: --message timeout-- ipcx 0x83000000 isr 0x00000000 ipcd 0x00000000 imrx 0x7fff0000
[16823.376655] haswell-pcm-audio haswell-pcm-audio: error: stream commit failed
[16823.376662] System PCM: error: failed to commit stream -110
[16823.376670] haswell-pcm-audio haswell-pcm-audio: ASoC: haswell-pcm-audio hw params failed: -110
[16823.376679] System PCM: ASoC: hw_params FE failed -110
[17013.479888] haswell-pcm-audio haswell-pcm-audio: ipc: --message timeout-- ipcx 0x83000000 isr 0x00000000 ipcd 0x00000000 imrx 0x7fff0000
[17013.479896] haswell-pcm-audio haswell-pcm-audio: error: stream commit failed
[17013.479900] System PCM: error: failed to commit stream -110
[17013.479903] haswell-pcm-audio haswell-pcm-audio: ASoC: haswell-pcm-audio hw params failed: -110
[17013.479908] System PCM: ASoC: hw_params FE failed -110
[17013.799921] haswell-pcm-audio haswell-pcm-audio: ipc: --message timeout-- ipcx 0x83000000 isr 0x00000000 ipcd 0x00000000 imrx 0x7fff0000
[17013.799935] haswell-pcm-audio haswell-pcm-audio: error: stream commit failed
[17013.799941] System PCM: error: failed to commit stream -110
[17013.799951] haswell-pcm-audio haswell-pcm-audio: ASoC: haswell-pcm-audio hw params failed: -110
[17013.799960] System PCM: ASoC: hw_params FE failed -110
[17014.119896] haswell-pcm-audio haswell-pcm-audio: ipc: --message timeout-- ipcx 0x83000000 isr 0x00000000 ipcd 0x00000000 imrx 0x7fff0000
[17014.119902] haswell-pcm-audio haswell-pcm-audio: error: stream commit failed
[17014.119907] System PCM: error: failed to commit stream -110
[17014.119910] haswell-pcm-audio haswell-pcm-audio: ASoC: haswell-pcm-audio hw params failed: -110
[17014.119914] System PCM: ASoC: hw_params FE failed -110
[17014.439891] haswell-pcm-audio haswell-pcm-audio: ipc: --message timeout-- ipcx 0x83000000 isr 0x00000000 ipcd 0x00000000 imrx 0x7fff0000
[17014.439897] haswell-pcm-audio haswell-pcm-audio: error: stream commit failed
[17014.439902] System PCM: error: failed to commit stream -110
[17014.439907] haswell-pcm-audio haswell-pcm-audio: ASoC: haswell-pcm-audio hw params failed: -110
[17014.439911] System PCM: ASoC: hw_params FE failed -110
[17014.759892] haswell-pcm-audio haswell-pcm-audio: ipc: --message timeout-- ipcx 0x83000000 isr 0x00000000 ipcd 0x00000000 imrx 0x7fff0000
[17014.759898] haswell-pcm-audio haswell-pcm-audio: error: stream commit failed
[17014.759903] System PCM: error: failed to commit stream -110
[17014.759906] haswell-pcm-audio haswell-pcm-audio: ASoC: haswell-pcm-audio hw params failed: -110
[17014.759910] System PCM: ASoC: hw_params FE failed -110
[17015.079916] haswell-pcm-audio haswell-pcm-audio: ipc: --message timeout-- ipcx 0x83000000 isr 0x00000000 ipcd 0x00000000 imrx 0x7fff0000
[17015.079924] haswell-pcm-audio haswell-pcm-audio: error: stream commit failed
[17015.079929] System PCM: error: failed to commit stream -110
[17015.079932] haswell-pcm-audio haswell-pcm-audio: ASoC: haswell-pcm-audio hw params failed: -110
[17015.079939] System PCM: ASoC: hw_params FE failed -110
[17015.399892] haswell-pcm-audio haswell-pcm-audio: ipc: --message timeout-- ipcx 0x83000000 isr 0x00000000 ipcd 0x00000000 imrx 0x7fff0000
[17015.399898] haswell-pcm-audio haswell-pcm-audio: error: stream commit failed
[17015.399902] System PCM: error: failed to commit stream -110
[17015.399905] haswell-pcm-audio haswell-pcm-audio: ASoC: haswell-pcm-audio hw params failed: -110
[17015.399909] System PCM: ASoC: hw_params FE failed -110
[17015.719888] haswell-pcm-audio haswell-pcm-audio: ipc: --message timeout-- ipcx 0x83000000 isr 0x00000000 ipcd 0x00000000 imrx 0x7fff0000
[17015.719893] haswell-pcm-audio haswell-pcm-audio: error: stream commit failed
[17015.719896] System PCM: error: failed to commit stream -110
[17015.719900] haswell-pcm-audio haswell-pcm-audio: ASoC: haswell-pcm-audio hw params failed: -110
[17015.719903] System PCM: ASoC: hw_params FE failed -110
[17016.039983] haswell-pcm-audio haswell-pcm-audio: ipc: --message timeout-- ipcx 0x83000000 isr 0x00000000 ipcd 0x00000000 imrx 0x7fff0000
[17016.039990] haswell-pcm-audio haswell-pcm-audio: error: stream commit failed
[17016.039994] System PCM: error: failed to commit stream -110
[17016.039997] haswell-pcm-audio haswell-pcm-audio: ASoC: haswell-pcm-audio hw params failed: -110
[17016.040001] System PCM: ASoC: hw_params FE failed -110
[17016.359926] haswell-pcm-audio haswell-pcm-audio: ipc: --message timeout-- ipcx 0x83000000 isr 0x00000000 ipcd 0x00000000 imrx 0x7fff0000
[17016.359940] haswell-pcm-audio haswell-pcm-audio: error: stream commit failed
[17016.359951] System PCM: error: failed to commit stream -110
[17016.359958] haswell-pcm-audio haswell-pcm-audio: ASoC: haswell-pcm-audio hw params failed: -110
[17016.359971] System PCM: ASoC: hw_params FE failed -110
[17016.679915] haswell-pcm-audio haswell-pcm-audio: ipc: --message timeout-- ipcx 0x83000000 isr 0x00000000 ipcd 0x00000000 imrx 0x7fff0000
[17016.679924] haswell-pcm-audio haswell-pcm-audio: error: stream commit failed
[17016.679930] System PCM: error: failed to commit stream -110
[17016.679937] haswell-pcm-audio haswell-pcm-audio: ASoC: haswell-pcm-audio hw params failed: -110
[17016.679944] System PCM: ASoC: hw_params FE failed -110
[17016.999928] haswell-pcm-audio haswell-pcm-audio: ipc: --message timeout-- ipcx 0x83000000 isr 0x00000000 ipcd 0x00000000 imrx 0x7fff0000
[17016.999938] haswell-pcm-audio haswell-pcm-audio: error: stream commit failed
[17016.999944] System PCM: error: failed to commit stream -110
[17016.999948] haswell-pcm-audio haswell-pcm-audio: ASoC: haswell-pcm-audio hw params failed: -110
[17016.999955] System PCM: ASoC: hw_params FE failed -110
[17017.319932] haswell-pcm-audio haswell-pcm-audio: ipc: --message timeout-- ipcx 0x83000000 isr 0x00000000 ipcd 0x00000000 imrx 0x7fff0000
[17017.319944] haswell-pcm-audio haswell-pcm-audio: error: stream commit failed
[17017.319953] System PCM: error: failed to commit stream -110
[17017.319961] haswell-pcm-audio haswell-pcm-audio: ASoC: haswell-pcm-audio hw params failed: -110
[17017.319968] System PCM: ASoC: hw_params FE failed -110
[17017.640106] haswell-pcm-audio haswell-pcm-audio: ipc: --message timeout-- ipcx 0x83000000 isr 0x00000000 ipcd 0x00000000 imrx 0x7fff0000
[17017.640119] haswell-pcm-audio haswell-pcm-audio: error: stream commit failed
[17017.640127] System PCM: error: failed to commit stream -110
[17017.640135] haswell-pcm-audio haswell-pcm-audio: ASoC: haswell-pcm-audio hw params failed: -110
[17017.640142] System PCM: ASoC: hw_params FE failed -110
[17017.959911] haswell-pcm-audio haswell-pcm-audio: ipc: --message timeout-- ipcx 0x83000000 isr 0x00000000 ipcd 0x00000000 imrx 0x7fff0000
[17017.959920] haswell-pcm-audio haswell-pcm-audio: error: stream commit failed
[17017.959927] System PCM: error: failed to commit stream -110
[17017.959933] haswell-pcm-audio haswell-pcm-audio: ASoC: haswell-pcm-audio hw params failed: -110
[17017.959940] System PCM: ASoC: hw_params FE failed -110
[17018.279922] haswell-pcm-audio haswell-pcm-audio: ipc: --message timeout-- ipcx 0x83000000 isr 0x00000000 ipcd 0x00000000 imrx 0x7fff0000
[17018.279934] haswell-pcm-audio haswell-pcm-audio: error: stream commit failed
[17018.279941] System PCM: error: failed to commit stream -110
[17018.279946] haswell-pcm-audio haswell-pcm-audio: ASoC: haswell-pcm-audio hw params failed: -110
[17018.279952] System PCM: ASoC: hw_params FE failed -110
[17018.599935] haswell-pcm-audio haswell-pcm-audio: ipc: --message timeout-- ipcx 0x83000000 isr 0x00000000 ipcd 0x00000000 imrx 0x7fff0000
[17018.599943] haswell-pcm-audio haswell-pcm-audio: error: stream commit failed
[17018.599949] System PCM: error: failed to commit stream -110
[17018.599954] haswell-pcm-audio haswell-pcm-audio: ASoC: haswell-pcm-audio hw params failed: -110
[17018.599964] System PCM: ASoC: hw_params FE failed -110
[17018.919886] haswell-pcm-audio haswell-pcm-audio: ipc: --message timeout-- ipcx 0x83000000 isr 0x00000000 ipcd 0x00000000 imrx 0x7fff0000
[17018.919893] haswell-pcm-audio haswell-pcm-audio: error: stream commit failed
[17018.919898] System PCM: error: failed to commit stream -110
[17018.919902] haswell-pcm-audio haswell-pcm-audio: ASoC: haswell-pcm-audio hw params failed: -110
[17018.919906] System PCM: ASoC: hw_params FE failed -110
[17019.239892] haswell-pcm-audio haswell-pcm-audio: ipc: --message timeout-- ipcx 0x83000000 isr 0x00000000 ipcd 0x00000000 imrx 0x7fff0000
[17019.239900] haswell-pcm-audio haswell-pcm-audio: error: stream commit failed
[17019.239904] System PCM: error: failed to commit stream -110
[17019.239909] haswell-pcm-audio haswell-pcm-audio: ASoC: haswell-pcm-audio hw params failed: -110
[17019.239913] System PCM: ASoC: hw_params FE failed -110
[17019.559906] haswell-pcm-audio haswell-pcm-audio: ipc: --message timeout-- ipcx 0x83000000 isr 0x00000000 ipcd 0x00000000 imrx 0x7fff0000
[17019.559915] haswell-pcm-audio haswell-pcm-audio: error: stream commit failed
[17019.559920] System PCM: error: failed to commit stream -110
[17019.559927] haswell-pcm-audio haswell-pcm-audio: ASoC: haswell-pcm-audio hw params failed: -110
[17019.559934] System PCM: ASoC: hw_params FE failed -110
[17019.879894] haswell-pcm-audio haswell-pcm-audio: ipc: --message timeout-- ipcx 0x83000000 isr 0x00000000 ipcd 0x00000000 imrx 0x7fff0000
[17019.879901] haswell-pcm-audio haswell-pcm-audio: error: stream commit failed
[17019.879905] System PCM: error: failed to commit stream -110
[17019.879909] haswell-pcm-audio haswell-pcm-audio: ASoC: haswell-pcm-audio hw params failed: -110
[17019.879919] System PCM: ASoC: hw_params FE failed -110
[17020.199890] haswell-pcm-audio haswell-pcm-audio: ipc: --message timeout-- ipcx 0x83000000 isr 0x00000000 ipcd 0x00000000 imrx 0x7fff0000
[17020.199897] haswell-pcm-audio haswell-pcm-audio: error: stream commit failed
[17020.199901] System PCM: error: failed to commit stream -110
[17020.199905] haswell-pcm-audio haswell-pcm-audio: ASoC: haswell-pcm-audio hw params failed: -110
[17020.199910] System PCM: ASoC: hw_params FE failed -110
[17020.519895] haswell-pcm-audio haswell-pcm-audio: ipc: --message timeout-- ipcx 0x83000000 isr 0x00000000 ipcd 0x00000000 imrx 0x7fff0000
[17020.519901] haswell-pcm-audio haswell-pcm-audio: error: stream commit failed
[17020.519906] System PCM: error: failed to commit stream -110
[17020.519910] haswell-pcm-audio haswell-pcm-audio: ASoC: haswell-pcm-audio hw params failed: -110
[17020.519914] System PCM: ASoC: hw_params FE failed -110
[17020.839896] haswell-pcm-audio haswell-pcm-audio: ipc: --message timeout-- ipcx 0x83000000 isr 0x00000000 ipcd 0x00000000 imrx 0x7fff0000
[17020.839901] haswell-pcm-audio haswell-pcm-audio: error: stream commit failed
[17020.839905] System PCM: error: failed to commit stream -110
[17020.839909] haswell-pcm-audio haswell-pcm-audio: ASoC: haswell-pcm-audio hw params failed: -110
[17020.839914] System PCM: ASoC: hw_params FE failed -110
[17021.159889] haswell-pcm-audio haswell-pcm-audio: ipc: --message timeout-- ipcx 0x83000000 isr 0x00000000 ipcd 0x00000000 imrx 0x7fff0000
[17021.159895] haswell-pcm-audio haswell-pcm-audio: error: stream commit failed
[17021.159899] System PCM: error: failed to commit stream -110
[17021.159903] haswell-pcm-audio haswell-pcm-audio: ASoC: haswell-pcm-audio hw params failed: -110
[17021.159907] System PCM: ASoC: hw_params FE failed -110
[17199.758445] audit: type=1701 audit(1536927535.520:5): auid=1000 uid=1000 gid=1000 ses=2 pid=8934 comm="axel" exe="/usr/bin/axel" sig=6 res=1
[17199.909334] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
[17247.093646] audit: type=1701 audit(1536927582.856:6): auid=1000 uid=1000 gid=1000 ses=2 pid=27503 comm="axel" exe="/usr/bin/axel" sig=6 res=1
[18341.340569] wlp1s0: deauthenticating from 68:db:54:2b:ab:ef by local choice (Reason: 3=DEAUTH_LEAVING)
[18341.362615] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[18341.399055] PM: suspend entry (deep)
[18341.399057] PM: Syncing filesystems ... done.
[18342.607300] Freezing user space processes ... (elapsed 0.003 seconds) done.
[18342.610617] OOM killer disabled.
[18342.610618] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[18342.611981] Suspending console(s) (use no_console_suspend to debug)
[18342.636435] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[18342.636604] sd 0:0:0:0: [sda] Stopping disk
[18342.744176] ACPI: EC: interrupt blocked
[18342.780644] ACPI: Preparing to enter system sleep state S3
[18342.780743] ACPI: EC: event blocked
[18342.780744] ACPI: EC: EC stopped
[18342.780746] PM: Saving platform NVS memory
[18342.780749] Disabling non-boot CPUs ...
[18342.832329] smpboot: CPU 1 is now offline
[18342.871298] smpboot: CPU 2 is now offline
[18342.911175] smpboot: CPU 3 is now offline
[18342.915239] ACPI: Low-level resume complete
[18342.915283] ACPI: EC: EC started
[18342.915284] PM: Restoring platform NVS memory
[18342.917876] Enabling non-boot CPUs ...
[18342.917914] x86: Booting SMP configuration:
[18342.917915] smpboot: Booting Node 0 Processor 1 APIC 0x1
[18342.918700] cache: parent cpu1 should not be sleeping
[18342.918850] CPU1 is up
[18342.918874] smpboot: Booting Node 0 Processor 2 APIC 0x3
[18342.920898] cache: parent cpu2 should not be sleeping
[18342.921235] CPU2 is up
[18342.921273] smpboot: Booting Node 0 Processor 3 APIC 0x2
[18342.922488] cache: parent cpu3 should not be sleeping
[18342.922865] CPU3 is up
[18342.931291] ACPI: Waking up from system sleep state S3
[18342.931546] ACPI: EC: interrupt unblocked
[18342.985511] i2c_designware INT3433:00: timeout waiting for bus ready
[18342.985524] atmel_mxt_ts i2c-ATML0001:01: __mxt_read_reg: i2c transfer failed (-110)
[18342.985528] atmel_mxt_ts i2c-ATML0001:01: Failed to read T44 and T5 (-110)
[18343.008869] i2c_designware INT3433:00: timeout waiting for bus ready
[18343.008881] atmel_mxt_ts i2c-ATML0001:01: __mxt_read_reg: i2c transfer failed (-110)
[18343.008885] atmel_mxt_ts i2c-ATML0001:01: Failed to read T44 and T5 (-110)
[18343.046017] ACPI: EC: event unblocked
[18343.056310] sd 0:0:0:0: [sda] Starting disk
[18343.285714] usb 1-4: reset high-speed USB device number 3 using xhci_hcd
[18343.538741] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[18343.548958] usb 1-7: reset high-speed USB device number 4 using xhci_hcd
[18343.606498] ata1.00: configured for UDMA/133
[18344.015528] i2c_designware INT3433:00: controller timed out
[18344.015547] atmel_mxt_ts i2c-ATML0001:01: __mxt_read_reg: i2c transfer failed (-110)
[18344.015550] atmel_mxt_ts i2c-ATML0001:01: Failed to read T44 and T5 (-110)
[18344.035765] haswell-pcm-audio haswell-pcm-audio: error: no free blocks for section at offset 0xa0000 size 0x10c
[18344.035769] haswell-pcm-audio haswell-pcm-audio: error: could not allocate blocks for module 0
[18344.035771] haswell-pcm-audio haswell-pcm-audio: error: invalid module 0
[18344.035773] haswell-pcm-audio haswell-pcm-audio: error: parse fw failed -12
[18344.035775] haswell-pcm-audio haswell-pcm-audio: error: SST FW reload failed
[18344.035783] haswell-pcm-audio haswell-pcm-audio: failed to reload -12
[18344.036050] OOM killer enabled.
[18344.036051] Restarting tasks ... done.
[18344.050298] PM: suspend exit
[18344.070491] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[18344.329093] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[18344.598963] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[18348.422097] wlp1s0: authenticate with 68:db:54:2b:ab:ef
[18348.426036] wlp1s0: send auth to 68:db:54:2b:ab:ef (try 1/3)
[18348.434662] wlp1s0: authenticated
[18348.435431] wlp1s0: associate with 68:db:54:2b:ab:ef (try 1/3)
[18348.444337] wlp1s0: RX AssocResp from 68:db:54:2b:ab:ef (capab=0x831 status=0 aid=1)
[18348.446047] wlp1s0: associated
[18348.547470] IPv6: ADDRCONF(NETDEV_CHANGE): wlp1s0: link becomes ready
[18944.600371] wlp1s0: deauthenticating from 68:db:54:2b:ab:ef by local choice (Reason: 3=DEAUTH_LEAVING)
[18944.617782] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[18944.645992] PM: suspend entry (deep)
[18944.645995] PM: Syncing filesystems ... done.
[18945.522495] Freezing user space processes ... (elapsed 0.002 seconds) done.
[18945.525407] OOM killer disabled.
[18945.525408] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[18945.526800] Suspending console(s) (use no_console_suspend to debug)
[18945.538651] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[18945.538810] sd 0:0:0:0: [sda] Stopping disk
[18945.816827] ACPI: EC: interrupt blocked
[18945.852900] ACPI: Preparing to enter system sleep state S3
[18945.853019] ACPI: EC: event blocked
[18945.853020] ACPI: EC: EC stopped
[18945.853022] PM: Saving platform NVS memory
[18945.853024] Disabling non-boot CPUs ...
[18945.897922] smpboot: CPU 1 is now offline
[18945.963505] smpboot: CPU 2 is now offline
[18946.003411] smpboot: CPU 3 is now offline
[18946.007001] ACPI: Low-level resume complete
[18946.007045] ACPI: EC: EC started
[18946.007045] PM: Restoring platform NVS memory
[18946.009673] Enabling non-boot CPUs ...
[18946.009709] x86: Booting SMP configuration:
[18946.009710] smpboot: Booting Node 0 Processor 1 APIC 0x1
[18946.010463] cache: parent cpu1 should not be sleeping
[18946.010613] CPU1 is up
[18946.010636] smpboot: Booting Node 0 Processor 2 APIC 0x3
[18946.012834] cache: parent cpu2 should not be sleeping
[18946.013292] CPU2 is up
[18946.013344] smpboot: Booting Node 0 Processor 3 APIC 0x2
[18946.014835] cache: parent cpu3 should not be sleeping
[18946.015300] CPU3 is up
[18946.026540] ACPI: Waking up from system sleep state S3
[18946.026778] ACPI: EC: interrupt unblocked
[18946.081238] i2c_designware INT3433:00: timeout waiting for bus ready
[18946.081251] atmel_mxt_ts i2c-ATML0001:01: __mxt_read_reg: i2c transfer failed (-110)
[18946.081255] atmel_mxt_ts i2c-ATML0001:01: Failed to read T44 and T5 (-110)
[18946.104635] i2c_designware INT3433:00: timeout waiting for bus ready
[18946.104648] atmel_mxt_ts i2c-ATML0001:01: __mxt_read_reg: i2c transfer failed (-110)
[18946.104652] atmel_mxt_ts i2c-ATML0001:01: Failed to read T44 and T5 (-110)
[18946.141793] ACPI: EC: event unblocked
[18946.152021] sd 0:0:0:0: [sda] Starting disk
[18946.381299] usb 1-7: reset high-speed USB device number 4 using xhci_hcd
[18946.634255] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[18946.647740] usb 1-4: reset high-speed USB device number 3 using xhci_hcd
[18946.689400] ata1.00: configured for UDMA/133
[18947.111101] i2c_designware INT3433:00: controller timed out
[18947.111116] atmel_mxt_ts i2c-ATML0001:01: __mxt_read_reg: i2c transfer failed (-110)
[18947.111118] atmel_mxt_ts i2c-ATML0001:01: Failed to read T44 and T5 (-110)
[18947.131272] haswell-pcm-audio haswell-pcm-audio: error: no free blocks for section at offset 0xa0000 size 0x10c
[18947.131275] haswell-pcm-audio haswell-pcm-audio: error: could not allocate blocks for module 0
[18947.131278] haswell-pcm-audio haswell-pcm-audio: error: invalid module 0
[18947.131280] haswell-pcm-audio haswell-pcm-audio: error: parse fw failed -12
[18947.131281] haswell-pcm-audio haswell-pcm-audio: error: SST FW reload failed
[18947.131289] haswell-pcm-audio haswell-pcm-audio: failed to reload -12
[18947.131493] OOM killer enabled.
[18947.131494] Restarting tasks ... done.
[18947.144825] PM: suspend exit
[18947.153970] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[18947.426317] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[18947.783708] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[18951.880325] wlp1s0: authenticate with 68:db:54:2b:ab:ef
[18951.884957] wlp1s0: send auth to 68:db:54:2b:ab:ef (try 1/3)
[18951.893934] wlp1s0: authenticated
[18951.894408] wlp1s0: associate with 68:db:54:2b:ab:ef (try 1/3)
[18951.903262] wlp1s0: RX AssocResp from 68:db:54:2b:ab:ef (capab=0x831 status=0 aid=1)
[18951.904912] wlp1s0: associated
[18952.005745] IPv6: ADDRCONF(NETDEV_CHANGE): wlp1s0: link becomes ready
[19982.642437] perf: interrupt took too long (7964 > 7943), lowering kernel.perf_event_max_sample_rate to 24900
[20884.875484] perf: interrupt took too long (10034 > 9955), lowering kernel.perf_event_max_sample_rate to 19800
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment