Skip to content

Instantly share code, notes, and snippets.

Show Gist options
  • Save opoet7/b1d82d7182b56eee7e34fa356a4a6356 to your computer and use it in GitHub Desktop.
Save opoet7/b1d82d7182b56eee7e34fa356a4a6356 to your computer and use it in GitHub Desktop.
# Cisco IOS system navigation tree (for a Router)
In here just trying to agregate the submenus most used in Cisco IOS, with the ? , to aid with the navigation mainly submenus used for CCNA. Created by Freddie Ventura updated on 21/10/2020
## Exec Commands
+-------
<1-99> |aaa
auto |crypto
clear |custom-queue
clock |eigrp
configure |ephone
connect |frame-relay
copy |ip
debug ---------------------------->|ipv6
delete +------ |ntp
dir |aaa |ppp
disable |access-lists |standby
disconnect |arp +------
enable |cdp
erase |class-map
exit |clock
logout |controllers
mkdir |crypto
more |debugging
no |dhcp
ping |dot11
reload |ephone +------
resume |file |access-lists
rmdir |flash: |arp
send |flow |bgp
setup |frame-relay |cache
show---------------->|history |cef
ssh |hosts |dhcp
telnet |interfaces |eigrp
terminal |ip--------------->|inspect
traceroute |ipv6 |interface
undebug |line |ips
vlan |lldp |nat
write |logging |nbar
|login |ospf
|mac-address-table |protocols
|ntp |rip
|parser |route
|policy-map |ssh
|pppoe +-------
|privilege
|processes
|protocols
|queue
|queueing
|running-config
|secure
|sessions
|snmp
|spanning-tree
|ssh
|standby
|startup-config
|storm-control
|tcp
|tech-support
|terminal
|users
|version
|vlan-switch
|vtp
|zone
|zone-pair
+---------------
## Configure Commands
aaa +----------
access-list |arp
banner |bandwidth
bba-group |cdp
boot |channel-group
cdp |crypto
class-map |custom-queue-list +------------
clock |delay |access-group
config-register |description |address
crypto |duplex |authentication
default (interface) |exit |flow
dial-peer +------------------------------------------>|fair-queue |hello-interval +---------
do | |hold-queue |helper-address |<1-65535>
dot11 | +----------- |ip --------------->|inspect |authentication
enable | |access-list |ipv6 |ips |authentication-key
end | |cef |lldp |mtu |cost
ephone | |default-gateway +----- |mac-address |nat |dead-interval
ephone-dn | |default-network |excluded-address |mtu |ospf -------------> |hello-interval
exit | |dhcp -----------> |pool |no |proxy-arp |message-digest-key
flow | |domain |relay |pppoe |split-horizon |network
hostname | |domain-lookup +----- |pppoe-client |summary-address |priority
interface----+ |domain-name |priority-group |virtual-reassembly +----------
ip ------------> |flow-export |service-policy +-------------
ipv6 |forward-protocol |shutdown
key |ftp |speed
line |host |standby
lldp |inspect |tx-ring-limit
logging |ips |zone-member
login |local +-------------
mac-address-table |name-server +----------
no |nat |bgp +------------
ntp |route |distance |auto-summary
parameter-map |routing +--> |exit |distance
parser |scp | |neighbor |eigrp
policy-map |ssh | |network |exit
port-channel |tcp | |no |metric
priority-list +------------- | |redistribute |neighbor
privilege +------ | |synchronization |network
queue-list |bgp---------------+ |timers |no
radius-server |eigrp ------------+ +---------- |passive-interface
router----------->|ospf --------+ +-------------------->|redistribute
secure |rip | +---------- |variance
security +|--- +--------- |area +----------
service | +-------- |auto-cost
snmp-server | |auto-summary |default-information
spanning-tree | |default-information |distance
tacacs-server | |distance |exit
telephony-service +>|exit |log-adjacency-changes
username |network |neighbor
vpdn |no |network
vpdn-group |passive-interface |no
zone |redistribute |passive-interface
zone-pair |timers |redistribute
|version |router-id
+--------- +--------
# Switches
Configure commands:
access-list
banner +--------
boot |cdp
cdp |channel-group
clock |channel-protocol
crypto |description
default |duplex
do |exit
enable |ip
end |lldp
exit |mdix
hostname |mls
interface ------> |no
ip |shutdown +---------
line |spanning-tree |access
lldp |speed |mode
logging |storm-control |nonegotiate
mac |switchport ---->|port-security
mac-address-table |tx-ring-limit |priority
mls +-------- |protected
monitor |trunk
no |voice
ntp +---------
port-channel
privilege
sdm
service
snmp-server
spanning-tree
username
vlan
vtp ---\ +------ +------
\ |domain |client
\ |mode ----> |server
----> |password |transparent
|version +------
+-------
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment