Created
January 19, 2010 01:15
-
-
Save oraccha/280560 to your computer and use it in GitHub Desktop.
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Reset IDE: | |
Marvell Serial ATA Adapter | |
Integrated Sata device found | |
Device 0: OK | |
Model: Hitachi HDP725050GLA360 Firm: GM4OA5CA Ser#: GEA534RV10 | |
BJEA | |
Type: Hard Disk | |
Supports 48-bit addressing | |
Capacity: 476940.0 MB = 465.7 GB (976773168 x 512) | |
Using device ide0, partition 1 | |
Loading from block device ide device 0, partition 1: Name: hda1 | |
Type: U-Boot File:/uImage.buffalo | |
4189104 bytes read | |
## Booting image at 00100000 ... | |
Image Name: NetBSD 5.0_STABLE (KUROBOX_PRO) | |
Created: 2009-12-29 1:14:20 UTC | |
Image Type: ARM NetBSD Kernel Image (uncompressed) | |
Data Size: 4189040 Bytes = 4 MB | |
Load Address: 00008000 | |
Entry Point: 00800000 | |
Verifying Checksum ... OK | |
OK | |
## Transferring control to NetBSD stage-2 loader (at address 00008000) ... | |
NetBSD/evbarm (orion_nas) booting ... | |
Loaded initial symtab at 0xc03876f8, strtab at 0xc03ba990, # entries 13008 | |
pmap_postinit: Allocated 35 static L1 descriptor tables | |
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, | |
2006, 2007, 2008, 2009 | |
The NetBSD Foundation, Inc. All rights reserved. | |
Copyright (c) 1982, 1986, 1989, 1991, 1993 | |
NetBSD 5.0_STABLE (KUROBOX_PRO) #0: Tue Dec 29 10:13:46 JST 2009 | |
root@:/opt/usr/src/sys/arch/evbarm/compile/obj/KUROBOX_PRO | |
total memory = 128 MB | |
avail memory = 120 MB | |
mainbus0 (root) | |
cpu0 at mainbus0: ARM926EJ-S rev 0 (ARM9EJ-S core) | |
cpu0: DC enabled IC enabled WB enabled EABT branch prediction enabled | |
cpu0: 32KB/32B 1-way Instruction cache | |
cpu0: 32KB/32B 1-way write-back-locking-C Data cache | |
mvsoc0 at mainbus0: Marvell MV88F5082 SoC Rev. A0 Orion1 | |
mvsoc0: CPU Clock 400.000 MHz SysClock 200.000 MHz TClock 166.664 MHz | |
oriontmr0 at mvsoc0 addr 0xf1020300-0xf10203ff: Marvell Orion Timer | |
oriongpp0 at mvsoc0 addr 0xf1010100-0xf10101ff: Marvell Orion General Purpose I/O Por | |
t Interface | |
oriongpp0: Data Out: 0x00000002 | |
oriongpp0: Data Out Enable Control: 0xff82bdfc | |
oriongpp0: Data Blink Enable: 0x00000001 | |
oriongpp0: Data In Polarity: 0x00008782 | |
oriongpp0: Data In: 0x0082033c | |
oriongpp0: Data Interrupt Cause: 0x00000001 | |
oriongpp0: Data Interrupt Mask: 0x00000000 | |
oriongpp0: Data Interrupt Level Mask: 0x00000000 | |
gpio0 at oriongpp0: 32 pins | |
com0 at mvsoc0 addr 0xf1012000-0xf101201f irq 3: ns16550a, working fifo | |
com0: console | |
com1 at mvsoc0 addr 0xf1012100-0xf101211f irq 4: ns16550a, working fifo | |
mvsata0 at mvsoc0 irq 29: Marvell Serial-ATA Host Controller (SATAHC) | |
mvsata0: GenIIe, 1hc, 1port/hc | |
atabus0 at mvsata0 channel 0 | |
ehci0 at mvsoc0 addr 0xf1050000-0xf1051fff irq 17: Marvell Orion USB 2.0 Interface | |
usb0 at ehci0: USB revision 2.0 | |
ehci1 at mvsoc0 addr 0xf10a0000-0xf10a1fff irq 12: Marvell Orion USB 2.0 Interface | |
usb1 at ehci1: USB revision 2.0 | |
mvgbe0 at mvsoc0 irq 21: Marvell Gigabit Ethernet Controller | |
mvgbe0: Ethernet address 00:1d:73:9d:cb:96 | |
makphy0 at mvgbe0 phy 8: Marvell 88E1116 Gigabit PHY, rev. 1 | |
makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto | |
mvtwsi0 at mvsoc0 irq 5: Marvell TWSI controller | |
iic0 at mvtwsi0: I2C bus | |
rs5c372rtc0 at iic0 addr 0x32: RICOH RS5C372[AB] Real-time Clock | |
mvpex0 at mvsoc0 addr 0xf1040000-0xf1041fff irq 11: Marvell PCI Express Interface | |
pci0 at mvpex0 | |
Marvell 88F5182 SoC Orion1 (miscellaneous memory, revision 0x02) at pci0 dev 0 function 0 not configured | |
mvcesa0 at mvsoc0 addr 0xf1090000-0xf109ffff irq 28: Marvell Cryptographic Engines and Security Accelerator | |
mvidmac0 at mvsoc0 addr 0xf1060800-0xf1060bff: Marvell IDMA Controller | |
uhub0 at usb0: vendor 0x0000 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 | |
uhub1 at usb1: vendor 0x0000 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 | |
mvsata0 port 0: device present, speed: 3.0Gb/s | |
wd0 at atabus0 drive 0: <Hitachi HDP725050GLA360> | |
wd0: 465 GB, 969021 cyl, 16 head, 63 sec, 512 bytes/sect x 976773168 sectors | |
raidattach: Asked for 8 units | |
Kernelized RAIDframe activated | |
Searching for RAID components... | |
boot device: <unknown> | |
root on wd0a dumps on wd0b | |
WARNING: clock gained 4419 days | |
WARNING: CHECK AND RESET THE DATE! | |
init: copying out path `/sbin/init' 11 | |
Thu Feb 3 13:28:24 JST 2022 | |
swapctl: adding /dev/wd0b as swap device at priority 0 | |
Starting file system checks: | |
/dev/rwd0a: file system is clean; not checking | |
Setting tty flags. | |
Setting sysctl variables: | |
kern.no_sa_support: 0 -> 1 | |
ddb.onpanic: 1 -> 0 | |
Starting network. | |
IPv6 mode: host | |
Configuring network interfaces:. | |
Adding interface aliases:. | |
Starting dhclient. | |
Internet Systems Consortium DHCP Client V3.0.3 | |
Copyright 2004-2005 Internet Systems Consortium. | |
All rights reserved. | |
For info, please visit http://www.isc.org/products/DHCP | |
Listening on BPF/mvgbe0/00:1d:73:9d:cb:96 | |
Sending on BPF/mvgbe0/00:1d:73:9d:cb:96 | |
Sending on Socket/fallback | |
DHCPDISCOVER on mvgbe0 to 255.255.255.255 port 67 interval 3 | |
DHCPDISCOVER on mvgbe0 to 255.255.255.255 port 67 interval 5 | |
ip length 328 disagrees with bytes received 332. | |
accepting packet with data after udp payload. | |
DHCPOFFER from XXX.XXX.XXX.XXX | |
DHCPREQUEST on mvgbe0 to 255.255.255.255 port 67 | |
ip length 328 disagrees with bytes received 332. | |
accepting packet with data after udp payload. | |
DHCPACK from XXX.XXX.XXX.XXX | |
bound to YYY.YYY.YYY.YYY -- renewal in 1691 seconds. | |
Building databases: dev, utmp, utmpx done | |
Starting syslogd. | |
Checking for core dump... | |
savecore: (null): kvm_openfiles: /netbsd: No such file or directory | |
Feb 3 13:28:38 savecore: (null): kvm_openfiles: /netbsd: No such file or directory | |
Mounting all filesystems... | |
Clearing temporary files. | |
Creating a.out runtime link editor directory cache. | |
Checking quotas: done. | |
Setting securelevel: kern.securelevel: 0 -> 1 | |
Starting virecover. | |
Starting local daemons:. | |
Updating motd. | |
Starting ntpd. | |
Starting sshd. | |
postfix: rebuilding /etc/mail/aliases (missing /etc/mail/aliases.db) | |
newaliases: warning: valid_hostname: empty hostname | |
newaliases: fatal: unable to use my own hostname | |
Feb 3 13:28:43 postfix/sendmail[270]: fatal: unable to use my own hostname | |
Starting inetd. | |
Starting cron. | |
Thu Feb 3 13:28:43 JST 2022 | |
NetBSD/evbarm (Amnesiac) (console) | |
login: |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment