Created
February 15, 2021 05:56
-
-
Save orgcontrib/05a7688f0b5680a9e577287a98917688 to your computer and use it in GitHub Desktop.
sudo smartctl -a -d sat /dev/sda
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| smartctl 7.2 2021-01-17 r5171 [x86_64-linux-5.10.15-200.fc33.x86_64] (local build) | |
| Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org | |
| === START OF INFORMATION SECTION === | |
| Model Family: Seagate Samsung SpinPoint M8 (AF) | |
| Device Model: ST1000LM024 HN-M101MBB | |
| Serial Number: S2ZUJ9BD705411 | |
| LU WWN Device Id: 5 0004cf 20aaf0f70 | |
| Firmware Version: 2AR20002 | |
| User Capacity: 1,000,204,886,016 bytes [1.00 TB] | |
| Sector Sizes: 512 bytes logical, 4096 bytes physical | |
| Rotation Rate: 5400 rpm | |
| Form Factor: 2.5 inches | |
| Device is: In smartctl database [for details use: -P show] | |
| ATA Version is: ATA8-ACS T13/1699-D revision 6 | |
| SATA Version is: SATA 3.0, 3.0 Gb/s (current: 3.0 Gb/s) | |
| Local Time is: Mon Feb 15 06:46:19 2021 CET | |
| SMART support is: Available - device has SMART capability. | |
| SMART support is: Enabled | |
| === START OF READ SMART DATA SECTION === | |
| SMART overall-health self-assessment test result: PASSED | |
| General SMART Values: | |
| Offline data collection status: (0x80) Offline data collection activity | |
| was never started. | |
| Auto Offline Data Collection: Enabled. | |
| Self-test execution status: ( 0) The previous self-test routine completed | |
| without error or no self-test has ever | |
| been run. | |
| Total time to complete Offline | |
| data collection: (12780) seconds. | |
| Offline data collection | |
| capabilities: (0x5b) SMART execute Offline immediate. | |
| Auto Offline data collection on/off support. | |
| Suspend Offline collection upon new | |
| command. | |
| Offline surface scan supported. | |
| Self-test supported. | |
| No Conveyance Self-test supported. | |
| Selective Self-test supported. | |
| SMART capabilities: (0x0003) Saves SMART data before entering | |
| power-saving mode. | |
| Supports SMART auto save timer. | |
| Error logging capability: (0x01) Error logging supported. | |
| General Purpose Logging supported. | |
| Short self-test routine | |
| recommended polling time: ( 2) minutes. | |
| Extended self-test routine | |
| recommended polling time: ( 213) minutes. | |
| SCT capabilities: (0x003f) SCT Status supported. | |
| SCT Error Recovery Control supported. | |
| SCT Feature Control supported. | |
| SCT Data Table supported. | |
| SMART Attributes Data Structure revision number: 16 | |
| Vendor Specific SMART Attributes with Thresholds: | |
| ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE | |
| 1 Raw_Read_Error_Rate 0x002f 100 100 051 Pre-fail Always - 0 | |
| 2 Throughput_Performance 0x0026 056 056 000 Old_age Always - 11653 | |
| 3 Spin_Up_Time 0x0023 086 086 025 Pre-fail Always - 4453 | |
| 4 Start_Stop_Count 0x0032 080 080 000 Old_age Always - 20465 | |
| 5 Reallocated_Sector_Ct 0x0033 252 252 010 Pre-fail Always - 0 | |
| 7 Seek_Error_Rate 0x002e 252 252 051 Old_age Always - 0 | |
| 8 Seek_Time_Performance 0x0024 252 252 015 Old_age Offline - 0 | |
| 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 12924 | |
| 10 Spin_Retry_Count 0x0032 252 252 051 Old_age Always - 0 | |
| 11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 849 | |
| 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 719 | |
| 191 G-Sense_Error_Rate 0x0022 252 252 000 Old_age Always - 0 | |
| 192 Power-Off_Retract_Count 0x0022 252 252 000 Old_age Always - 0 | |
| 194 Temperature_Celsius 0x0002 064 047 000 Old_age Always - 35 (Min/Max 18/53) | |
| 195 Hardware_ECC_Recovered 0x003a 100 100 000 Old_age Always - 0 | |
| 196 Reallocated_Event_Count 0x0032 252 252 000 Old_age Always - 0 | |
| 197 Current_Pending_Sector 0x0032 252 252 000 Old_age Always - 0 | |
| 198 Offline_Uncorrectable 0x0030 252 252 000 Old_age Offline - 0 | |
| 199 UDMA_CRC_Error_Count 0x0036 100 100 000 Old_age Always - 11 | |
| 200 Multi_Zone_Error_Rate 0x002a 100 100 000 Old_age Always - 123 | |
| 223 Load_Retry_Count 0x0032 100 100 000 Old_age Always - 849 | |
| 225 Load_Cycle_Count 0x0032 092 092 000 Old_age Always - 87356 | |
| SMART Error Log Version: 1 | |
| No Errors Logged | |
| SMART Self-test log structure revision number 1 | |
| Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error | |
| # 1 Short offline Completed without error 00% 12924 - | |
| # 2 Extended offline Completed without error 00% 12924 - | |
| # 3 Short offline Completed without error 00% 12904 - | |
| # 4 Short offline Completed without error 00% 12896 - | |
| # 5 Short offline Completed without error 00% 12887 - | |
| # 6 Extended offline Completed without error 00% 12885 - | |
| # 7 Short offline Completed without error 00% 12875 - | |
| # 8 Short offline Completed without error 00% 12870 - | |
| # 9 Short offline Completed without error 00% 12866 - | |
| SMART Selective self-test log data structure revision number 0 | |
| Note: revision number not 1 implies that no selective self-test has ever been run | |
| SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS | |
| 1 0 0 Completed [00% left] (0-65535) | |
| 2 0 0 Not_testing | |
| 3 0 0 Not_testing | |
| 4 0 0 Not_testing | |
| 5 0 0 Not_testing | |
| Selective self-test flags (0x0): | |
| After scanning selected spans, do NOT read-scan remainder of disk. | |
| If Selective self-test is pending on power-up, resume after 0 minute delay. |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment