Ubiquiti USG configuration for Wireguard

README.md

Download the latest ugw3 package from https://github.com/Lochnair/vyatta-wireguard/releases and install it on your USG using dpkg -i wireguard-ugw3-<version>.deb.

cd /config/auth
umask 077
mkdir wireguard
cd wireguard
wg genkey > wg_private.key
wg pubkey < wg_private.key > wg_public.key

Copy example config.gateway.json to /var/lib/unifi/data/sites/default on the host running the Controller. Then through the Controller Web UI navigate to Devices, click on the USG row and then in the Properties window navigate to Config > Manage Device and click Provision.

To allow remote access navigate to Settings > Routing & Firewall > Firewall > WAN LOCAL and create a new rule to accept UDP traffic to port 51820.

Note that the mask associated with the allowed-ips is not a netmask! I also found that provisioning failed with a /32 mask with only some very vague errors in /var/log/messages.

See also

• Release: WireGuard for EdgeRouter
• Tips for setting up wireguard site-to-site VPN
• WireGuard VPN server setup on USG
• Systemd example network configuration
• Installing WireGuard on routers running OpenWrt and LuCI

config.gateway.json

{
    "firewall": {
        "group": {
            "network-group": {
                "remote_user_vpn_network": {
                    "description": "Remote User VPN subnets",
                    "network": [
                        "10.2.1.0/24"
                    ]
                }
            }
        }
    },
    "interfaces": {
        "wireguard": {
            "wg0": {
                "address": [
                    "10.2.1.1/24"
                ],
                "firewall": {
                    "in": {
                        "name": "LAN_IN"
                    },
                    "local": {
                        "name": "LAN_LOCAL"
                    },
                    "out": {
                        "name": "LAN_OUT"
                    }
                },
                "listen-port": "51820",
                "mtu": "1352",
                "peer": [{
                    "ANDROID-PHONE-PUBLIC-KEY": {
                        "allowed-ips": [
                            "10.2.1.5/32"
                        ],
                        "persistent-keepalive": 25
                    }
                }],
                "private-key": "/config/auth/wireguard/wg_private.key",
                "route-allowed-ips": "true"
            }
        }
    }
}

Question,

In LAN OUT I drop everything from the WireGuard VLAN to all internal IP (RC1819) and i have allow rules to allow communication to specific servers. This works.
But from the WireGuard client i can Web&SSH to all gateways. It dont matter if i Drop all Web/SSH to All Gateways.
I did try, WAN Local, LAN in, Lan Out, Lan Local. But nothing is blocking this traffic.

Has anyone a idea about how to block the gateways access?

@simonkaiser9 @ruchette I have the same problem.
I have setup the USG as a Wireguard Client.
The connection is established. From the USG SSH command line I can ping the remote wireguard server and all devices in remote Lan.
I cannot ping the remote devices from any of my local lan pcs...
Local Lan 192.168.2.x ; Remote Lan 192.168.1.x
I can see the route is set on USG:
"192.168.1.0/24 dev wg0 scope link"

Help!! I have spent 2 days on this :$

@vettronics I am - to be quite honest - not one hundred percent sure why my setup is now working flawlessly, but I got rid of the static route and have "route-allowed-ips" set to "true" for wg0. Routing between my two connected sites works perfect right now. There are no additional routes configured...

@simonkaiser9
Found out the problem :) (contribution from WireGuard/wireguard-vyatta-ubnt#109)
Besides having the routes I also needed to have the my local subnet on the allowedips of the remote server.

Copy example config.gateway.json to /var/lib/unifi/data/sites/default on the host running the Controller.

thats assuming/presuming the host is running linux and not windows like my self with windows server.

this file path is invalid

Copy example config.gateway.json to /var/lib/unifi/data/sites/default on the host running the Controller.

thats assuming/presuming the host is running linux and not windows like my self with windows server.

this file path is invalid

Well, that's your fault 🤕

Copy example config.gateway.json to /var/lib/unifi/data/sites/default on the host running the Controller.
thats assuming/presuming the host is running linux and not windows like my self with windows server.
this file path is invalid

Well, that's your fault 🤕

If I could have chose Linux, I def would have. Freedom is better.

I really need help with this config... :(
I've managed to put wireguard running on my USG, I am able to connect from mobile phone to wireguard server on USG, from my USG I can ping both mobile phone, and internal network when I ssh to my USG, but I cannot access internal LAN resources via mobile phone when connected to wireguard server on USG.

Any hints?

My config.gateway.json file:

{
	"firewall": {
		"group": {
			"network-group": {
				"remote_user_vpn_network": {
					"description": "Remote User VPN subnets",
					"network": [
						"192.168.5.0/24"
					]
				}
			}
		}
	},
  "interfaces": {
    "wireguard": {
      "wg0": {
        "address": [
          "192.168.5.1/24"  
        ],
        "firewall": {
          "in": {
            "name": "LAN_IN"
          },
          "local": {
            "name": "LAN_LOCAL"
          },
          "out": {
            "name": "LAN_OUT"
          }
        },
        "listen-port": "51821",  
        "mtu": "1500",
        "peer": [{
          "public_key_of_android_phone": {   
            "allowed-ips": [
              "192.168.5.50/32"               
            ],
            "persistent-keepalive": 25
          }
        },
        {
          "public_key_of_another_device": {   
            "allowed-ips": [
              "192.168.5.51/32"
            ],
            "persistent-keepalive": 25
          }
        }],
        "private-key": "/config/auth/wireguard/wg_private.key",  
        "route-allowed-ips": "true"
      }
    }
  }
}

My wireguard configuration on mobile phone:
Interface:
public_key_of_android_phone
address: 192.168.5.50/32

peer:
endpoint: public_FQDN:52821
public_key_of_usg
allowed_ips: 0.0.0.0/0
keep-alive: 25s

output of route command on USG:
Kernel IP routing table

Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
default         (redacted) 0.0.0.0         UG    0      0        0 eth0
(redacted)     *               255.255.255.0   U     0      0        0 eth0
loopback        *               255.0.0.0       U     0      0        0 lo
192.168.0.0     *               255.255.254.0   U     0      0        0 eth1
192.168.2.0     *               255.255.255.0   U     0      0        0 eth1.2
192.168.5.0     *               255.255.255.0   U     0      0        0 wg0

output of wg command on USG:

root@USG:~# wg
interface: wg0
  public key: (redacted)
  private key: (redacted)
  listening port: 51821

peer: (redacted)
  endpoint: (redacted):1304
  allowed ips: 192.168.5.50/32
  latest handshake: 41 seconds ago
  transfer: 60.14 KiB received, 105.39 KiB sent
  persistent keepalive: every 25 seconds

Any help would be much appreciated.
I've seen other forums with information, but typically very old one...