Skip to content

Instantly share code, notes, and snippets.

@pamolloy

pamolloy/gist:42066b8553ff97d693c0a274ce7a3a83

Created July 23, 2021 16:43
Show Gist options
  • Star 0 You must be signed in to star a gist
  • Fork 0 You must be signed in to fork a gist
  • Save pamolloy/42066b8553ff97d693c0a274ce7a3a83 to your computer and use it in GitHub Desktop.
Save pamolloy/42066b8553ff97d693c0a274ce7a3a83 to your computer and use it in GitHub Desktop.
Download ZIP
RockPro64 kernel boot log
Raw
gistfile1.txt
U-Boot TPL 2020.07 (Jul 20 2021 - 21:07:08)
Channel 0: LPDDR4, 50MHz
BW=32 Col=10 Bk=8 CS0 Row=15 CS1 Row=15 CS=2 Die BW=16 Size=2048MB
Channel 1: LPDDR4, 50MHz
BW=32 Col=10 Bk=8 CS0 Row=15 CS1 Row=15 CS=2 Die BW=16 Size=2048MB
256B stride
256B stride
lpddr4_set_rate: change freq to 400000000 mhz 0, 1
lpddr4_set_rate: change freq to 800000000 mhz 1, 0
Trying to boot from BOOTROM
Returning to boot ROM...
U-Boot SPL 2020.07 (Jul 20 2021 - 21:07:08 -0400)
Trying to boot from MMC1
U-Boot 2020.07 (Jul 20 2021 - 21:07:08 -0400)
SoC: Rockchip rk3399
Reset cause: POR
Model: Pine64 RockPro64 v2.1
DRAM: 3.9 GiB
PMIC: RK808
MMC: mmc@fe310000: 2, mmc@fe320000: 1, sdhci@fe330000: 0
Loading Environment from SPI Flash... SF: Detected gd25q128 with page size 256 Bytes, erase size 4 KiB, B
*** Warning - bad CRC, using default environment
In: serial
Out: serial
Err: serial
Model: Pine64 RockPro64 v2.1
Net: eth0: ethernet@fe300000
Hit any key to stop autoboot: 0
Card did not respond to voltage select!
switch to partitions #0, OK
mmc1 is current device
Scanning mmc 1:3...
Found /extlinux/extlinux.conf
Retrieving file: /extlinux/extlinux.conf
157 bytes read in 5 ms (30.3 KiB/s)
1: RK3399_ROCKPRO64 linux
Retrieving file: /Image
29813248 bytes read in 1538 ms (18.5 MiB/s)
append: earlycon=uart8250,mmio32,0xff1a0000 root=/dev/mmcblk0p4 rw rootwait
Retrieving file: /rk3399-rockpro64.dtb
56511 bytes read in 8 ms (6.7 MiB/s)
## Flattened Device Tree blob at 01f00000
Booting using the fdt blob at 0x1f00000
Loading Device Tree to 00000000f1f0b000, end 00000000f1f1bcbe ... OK
Starting kernel ...
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[ 0.000000] Linux version 5.8.2 (philip@gorham) (aarch64-buildroot-linux-uclibc-gcc.br_real (Buildroo1
[ 0.000000] Machine model: Pine64 RockPro64 v2.1
[ 0.000000] earlycon: uart8250 at MMIO32 0x00000000ff1a0000 (options '')
[ 0.000000] printk: bootconsole [uart8250] enabled
[ 0.000000] efi: UEFI not found.
[ 0.000000] cma: Reserved 32 MiB at 0x00000000f6000000
[ 0.000000] NUMA: No NUMA configuration found
[ 0.000000] NUMA: Faking a node at [mem 0x0000000000200000-0x00000000f7ffffff]
[ 0.000000] NUMA: NODE_DATA [mem 0xf57ed100-0xf57eefff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000200000-0x000000003fffffff]
[ 0.000000] DMA32 [mem 0x0000000040000000-0x00000000f7ffffff]
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000200000-0x00000000f7ffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000200000-0x00000000f7ffffff]
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.1 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
[ 0.000000] psci: SMC Calling Convention v1.2
[ 0.000000] percpu: Embedded 23 pages/cpu s53912 r8192 d32104 u94208
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] CPU features: detected: ARM erratum 845719
[ 0.000000] CPU features: detected: GIC system register CPU interface
[ 0.000000] Speculative Store Bypass Disable mitigation not required
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 999432
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: earlycon=uart8250,mmio32,0xff1a0000 root=/dev/mmcblk0p4 rw rootwait
[ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] software IO TLB: mapped [mem 0x3bfff000-0x3ffff000] (64MB)
[ 0.000000] Memory: 3852304K/4061184K available (13820K kernel code, 2170K rwdata, 7476K rodata, 5568)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000] rcu: RCU event tracing is enabled.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6.
[ 0.000000] Trampoline variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[ 0.000000] GICv3: 256 SPIs implemented
[ 0.000000] GICv3: 0 Extended SPIs implemented
[ 0.000000] GICv3: Distributor has no Range Selector support
[ 0.000000] GICv3: 16 PPIs implemented
[ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000fef00000
[ 0.000000] ITS [mem 0xfee20000-0xfee3ffff]
[ 0.000000] ITS@0x00000000fee20000: allocated 65536 Devices @f4c80000 (flat, esz 8, psz 64K, shr 0)
[ 0.000000] ITS: using cache flushing for cmd queue
[ 0.000000] GICv3: using LPI property table @0x00000000f4c40000
[ 0.000000] GIC: using cache flushing for LPI property table
[ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x00000000f4c50000
[ 0.000000] GICv3: GIC: PPI partition interrupt-partition-0[0] { /cpus/cpu@0[0] /cpus/cpu@1[1] /cpus/}
[ 0.000000] GICv3: GIC: PPI partition interrupt-partition-1[1] { /cpus/cpu@100[4] /cpus/cpu@101[5] }
[ 0.000000] random: get_random_bytes called from start_kernel+0x310/0x4dc with crng_init=0
[ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns
[ 0.000007] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[ 0.003729] Console: colour dummy device 80x25
[ 0.004158] printk: console [tty0] enabled
[ 0.004563] printk: bootconsole [uart8250] disabled
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[ 0.000000] Linux version 5.8.2 (philip@gorham) (aarch64-buildroot-linux-uclibc-gcc.br_real (Buildroo1
[ 0.000000] Machine model: Pine64 RockPro64 v2.1
[ 0.000000] earlycon: uart8250 at MMIO32 0x00000000ff1a0000 (options '')
[ 0.000000] printk: bootconsole [uart8250] enabled
[ 0.000000] efi: UEFI not found.
[ 0.000000] cma: Reserved 32 MiB at 0x00000000f6000000
[ 0.000000] NUMA: No NUMA configuration found
[ 0.000000] NUMA: Faking a node at [mem 0x0000000000200000-0x00000000f7ffffff]
[ 0.000000] NUMA: NODE_DATA [mem 0xf57ed100-0xf57eefff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000200000-0x000000003fffffff]
[ 0.000000] DMA32 [mem 0x0000000040000000-0x00000000f7ffffff]
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000200000-0x00000000f7ffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000200000-0x00000000f7ffffff]
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.1 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
[ 0.000000] psci: SMC Calling Convention v1.2
[ 0.000000] percpu: Embedded 23 pages/cpu s53912 r8192 d32104 u94208
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] CPU features: detected: ARM erratum 845719
[ 0.000000] CPU features: detected: GIC system register CPU interface
[ 0.000000] Speculative Store Bypass Disable mitigation not required
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 999432
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: earlycon=uart8250,mmio32,0xff1a0000 root=/dev/mmcblk0p4 rw rootwait
[ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] software IO TLB: mapped [mem 0x3bfff000-0x3ffff000] (64MB)
[ 0.000000] Memory: 3852304K/4061184K available (13820K kernel code, 2170K rwdata, 7476K rodata, 5568)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000] rcu: RCU event tracing is enabled.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6.
[ 0.000000] Trampoline variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[ 0.000000] GICv3: 256 SPIs implemented
[ 0.000000] GICv3: 0 Extended SPIs implemented
[ 0.000000] GICv3: Distributor has no Range Selector support
[ 0.000000] GICv3: 16 PPIs implemented
[ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000fef00000
[ 0.000000] ITS [mem 0xfee20000-0xfee3ffff]
[ 0.000000] ITS@0x00000000fee20000: allocated 65536 Devices @f4c80000 (flat, esz 8, psz 64K, shr 0)
[ 0.000000] ITS: using cache flushing for cmd queue
[ 0.000000] GICv3: using LPI property table @0x00000000f4c40000
[ 0.000000] GIC: using cache flushing for LPI property table
[ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x00000000f4c50000
[ 0.000000] GICv3: GIC: PPI partition interrupt-partition-0[0] { /cpus/cpu@0[0] /cpus/cpu@1[1] /cpus/}
[ 0.000000] GICv3: GIC: PPI partition interrupt-partition-1[1] { /cpus/cpu@100[4] /cpus/cpu@101[5] }
[ 0.000000] random: get_random_bytes called from start_kernel+0x310/0x4dc with crng_init=0
[ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns
[ 0.000007] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[ 0.003729] Console: colour dummy device 80x25
[ 0.004158] printk: console [tty0] enabled
[ 0.004563] printk: bootconsole [uart8250] disabled
[ 0.005165] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS)
[ 0.005201] pid_max: default: 32768 minimum: 301
[ 0.005355] LSM: Security Framework initializing
[ 0.005473] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.005520] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.007919] rcu: Hierarchical SRCU implementation.
[ 0.008275] Platform MSI: interrupt-controller@fee20000 domain created
[ 0.008726] PCI/MSI: /interrupt-controller@fee00000/interrupt-controller@fee20000 domain created
[ 0.009058] fsl-mc MSI: /interrupt-controller@fee00000/interrupt-controller@fee20000 domain created
[ 0.015411] EFI services will not be available.
[ 0.015863] smp: Bringing up secondary CPUs ...
[ 0.016545] Detected VIPT I-cache on CPU1
[ 0.016589] GICv3: CPU1: found redistributor 1 region 0:0x00000000fef20000
[ 0.016606] GICv3: CPU1: using allocated LPI pending table @0x00000000f4c60000
[ 0.016655] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
[ 0.017384] Detected VIPT I-cache on CPU2
[ 0.017417] GICv3: CPU2: found redistributor 2 region 0:0x00000000fef40000
[ 0.017431] GICv3: CPU2: using allocated LPI pending table @0x00000000f4c70000
[ 0.017466] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
[ 0.018160] Detected VIPT I-cache on CPU3
[ 0.018190] GICv3: CPU3: found redistributor 3 region 0:0x00000000fef60000
[ 0.018203] GICv3: CPU3: using allocated LPI pending table @0x00000000f4d00000
[ 0.018235] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
[ 0.018905] CPU features: detected: EL2 vector hardening
[ 0.018930] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
[ 0.018938] Detected PIPT I-cache on CPU4
[ 0.018970] GICv3: CPU4: found redistributor 100 region 0:0x00000000fef80000
[ 0.018984] GICv3: CPU4: using allocated LPI pending table @0x00000000f4d10000
[ 0.019020] CPU4: Booted secondary processor 0x0000000100 [0x410fd082]
[ 0.019705] Detected PIPT I-cache on CPU5
[ 0.019731] GICv3: CPU5: found redistributor 101 region 0:0x00000000fefa0000
[ 0.019744] GICv3: CPU5: using allocated LPI pending table @0x00000000f4d20000
[ 0.019774] CPU5: Booted secondary processor 0x0000000101 [0x410fd082]
[ 0.019878] smp: Brought up 1 node, 6 CPUs
[ 0.020240] SMP: Total of 6 processors activated.
[ 0.020261] CPU features: detected: 32-bit EL0 Support
[ 0.020283] CPU features: detected: CRC32 instructions
[ 0.020305] CPU features: detected: 32-bit EL1 Support
[ 0.037952] CPU: All CPU(s) started at EL2
[ 0.038019] alternatives: patching kernel code
[ 0.041397] devtmpfs: initialized
[ 0.051225] KASLR disabled due to lack of seed
[ 0.051777] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100s
[ 0.051813] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
[ 0.052757] pinctrl core: initialized pinctrl subsystem
[ 0.054212] thermal_sys: Registered thermal governor 'step_wise'
[ 0.054216] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.054728] DMI not present or invalid.
[ 0.055328] NET: Registered protocol family 16
[ 0.056077] DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations
[ 0.056245] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.056404] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.056461] audit: initializing netlink subsys (disabled)
[ 0.056666] audit: type=2000 audit(0.052:1): state=initialized audit_enabled=0 res=1
[ 0.058026] cpuidle: using governor menu
[ 0.058278] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.058456] ASID allocator initialised with 65536 entries
[ 0.060365] Serial: AMBA PL011 UART driver
[ 0.131675] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.131702] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[ 0.131719] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.131735] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[ 0.133371] cryptd: max_cpu_qlen set to 1000
[ 0.136999] ACPI: Interpreter disabled.
[ 0.140369] vcc3v3_pcie: supplied by vcc12v_dcin
[ 0.141688] vcc5v0_sys: supplied by vcc12v_dcin
[ 0.141999] vcc5v0_usb: supplied by vcc12v_dcin
[ 0.142171] vcc3v3_sys: supplied by vcc5v0_sys
[ 0.142225] vcc3v0_sd: supplied by vcc3v3_sys
[ 0.143166] iommu: Default domain type: Translated
[ 0.145483] vgaarb: loaded
[ 0.145803] SCSI subsystem initialized
[ 0.146230] usbcore: registered new interface driver usbfs
[ 0.146280] usbcore: registered new interface driver hub
[ 0.146370] usbcore: registered new device driver usb
[ 0.147922] pps_core: LinuxPPS API ver. 1 registered
[ 0.147938] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.147966] PTP clock support registered
[ 0.148212] EDAC MC: Ver: 3.0.0
[ 0.150514] FPGA manager framework
[ 0.150604] Advanced Linux Sound Architecture Driver Initialized.
[ 0.151341] clocksource: Switched to clocksource arch_sys_counter
[ 0.151649] VFS: Disk quotas dquot_6.6.0
[ 0.151726] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.151933] pnp: PnP ACPI: disabled
[ 0.158549] NET: Registered protocol family 2
[ 0.158982] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
[ 0.159077] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.159463] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear)
[ 0.160140] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.160279] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
[ 0.160425] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
[ 0.160701] NET: Registered protocol family 1
[ 0.161244] RPC: Registered named UNIX socket transport module.
[ 0.161262] RPC: Registered udp transport module.
[ 0.161274] RPC: Registered tcp transport module.
[ 0.161286] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.161305] PCI: CLS 0 bytes, default 64
[ 0.162317] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
[ 0.162644] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
[ 0.163293] kvm [1]: IPA Size Limit: 40bits
[ 0.164210] kvm [1]: vgic-v2@fff20000
[ 0.164252] kvm [1]: GIC system register CPU interface enabled
[ 0.164446] kvm [1]: vgic interrupt IRQ10
[ 0.164671] kvm [1]: Hyp mode initialized successfully
[ 0.170012] Initialise system trusted keyrings
[ 0.170183] workingset: timestamp_bits=44 max_order=20 bucket_order=0
[ 0.176911] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.177695] NFS: Registering the id_resolver key type
[ 0.177729] Key type id_resolver registered
[ 0.177742] Key type id_legacy registered
[ 0.177763] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 0.177930] 9p: Installing v9fs 9p2000 file system support
[ 0.242522] Key type asymmetric registered
[ 0.242539] Asymmetric key parser 'x509' registered
[ 0.242582] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
[ 0.242601] io scheduler mq-deadline registered
[ 0.242614] io scheduler kyber registered
[ 0.250688] vcc5v0_host: supplied by vcc5v0_usb
[ 0.271212] EINJ: ACPI disabled.
[ 0.283611] dma-pl330 ff6d0000.dma-controller: Loaded driver for PL330 DMAC-241330
[ 0.283641] dma-pl330 ff6d0000.dma-controller: DBUFF-32x8bytes Num_Chans-6 Num_Peri-12 Num_Even2
[ 0.284843] dma-pl330 ff6e0000.dma-controller: Loaded driver for PL330 DMAC-241330
[ 0.284867] dma-pl330 ff6e0000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Eve6
[ 0.294737] pwm-regulator: supplied by regulator-dummy
[ 0.294962] vcc5v0_typec: supplied by vcc5v0_usb
[ 0.301789] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.304325] ff180000.serial: ttyS0 at MMIO 0xff180000 (irq = 38, base_baud = 1500000) is a 16550A
[ 0.304493] serial serial0: tty port ttyS0 registered
[ 0.305020] ff1a0000.serial: ttyS2 at MMIO 0xff1a0000 (irq = 39, base_baud = 1500000) is a 16550A
[ 0.405596] printk: console [ttyS2] enabled
[ 0.408258] SuperH (H)SCI(F) driver initialized
[ 0.409826] msm_serial: driver initialized
[ 0.413349] cacheinfo: Unable to detect cache hierarchy for CPU 0
[ 0.422242] loop: module loaded
[ 0.424071] megasas: 07.714.04.00-rc1
[ 0.432703] spi-nor spi0.0: gd25q128 (16384 Kbytes)
[ 0.439646] libphy: Fixed MDIO Bus: probed
[ 0.440726] tun: Universal TUN/TAP device driver, 1.6
[ 0.442665] thunder_xcv, ver 1.0
[ 0.442996] thunder_bgx, ver 1.0
[ 0.443378] nicpf, ver 1.0
[ 0.445832] hclge is initializing
[ 0.446187] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version
[ 0.446832] hns3: Copyright (c) 2017 Huawei Corporation.
[ 0.447380] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[ 0.448007] e1000: Copyright (c) 1999-2006 Intel Corporation.
[ 0.448554] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 0.449074] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 0.449640] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.6.0-k
[ 0.450258] igb: Copyright (c) 2007-2014 Intel Corporation.
[ 0.450793] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k
[ 0.451523] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
[ 0.452731] sky2: driver version 1.30
[ 0.454781] VFIO - User Level meta-driver version: 0.3
[ 0.463932] OF: graph: no port node found in /syscon@ff770000/usb2-phy@e450/otg-port
[ 0.476570] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.477162] ehci-pci: EHCI PCI platform driver
[ 0.477592] ehci-platform: EHCI generic platform driver
[ 0.480340] ehci-platform fe380000.usb: EHCI Host Controller
[ 0.480872] ehci-platform fe380000.usb: new USB bus registered, assigned bus number 1
[ 0.481685] ehci-platform fe380000.usb: irq 31, io mem 0xfe380000
[ 0.495362] ehci-platform fe380000.usb: USB 2.0 started, EHCI 1.00
[ 0.496535] hub 1-0:1.0: USB hub found
[ 0.496904] hub 1-0:1.0: 1 port detected
[ 0.499764] ehci-platform fe3c0000.usb: EHCI Host Controller
[ 0.500294] ehci-platform fe3c0000.usb: new USB bus registered, assigned bus number 2
[ 0.501078] ehci-platform fe3c0000.usb: irq 33, io mem 0xfe3c0000
[ 0.519352] ehci-platform fe3c0000.usb: USB 2.0 started, EHCI 1.00
[ 0.520422] hub 2-0:1.0: USB hub found
[ 0.520795] hub 2-0:1.0: 1 port detected
[ 0.521710] ehci-orion: EHCI orion driver
[ 0.522335] ehci-exynos: EHCI Exynos driver
[ 0.522900] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.523499] ohci-pci: OHCI PCI platform driver
[ 0.523954] ohci-platform: OHCI generic platform driver
[ 0.524623] ohci-platform fe3a0000.usb: Generic Platform OHCI controller
[ 0.525235] ohci-platform fe3a0000.usb: new USB bus registered, assigned bus number 3
[ 0.526022] ohci-platform fe3a0000.usb: irq 32, io mem 0xfe3a0000
[ 0.587929] hub 3-0:1.0: USB hub found
[ 0.588298] hub 3-0:1.0: 1 port detected
[ 0.589081] ohci-platform fe3e0000.usb: Generic Platform OHCI controller
[ 0.589699] ohci-platform fe3e0000.usb: new USB bus registered, assigned bus number 4
[ 0.590486] ohci-platform fe3e0000.usb: irq 34, io mem 0xfe3e0000
[ 0.651890] hub 4-0:1.0: USB hub found
[ 0.652260] hub 4-0:1.0: 1 port detected
[ 0.653150] ohci-exynos: OHCI Exynos driver
[ 0.654461] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 0.654971] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 5
[ 0.655831] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x000000000201000
[ 0.656684] xhci-hcd xhci-hcd.0.auto: irq 230, io mem 0xfe800000
[ 0.657941] hub 5-0:1.0: USB hub found
[ 0.658310] hub 5-0:1.0: 1 port detected
[ 0.658952] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 0.659494] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 6
[ 0.660187] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
[ 0.660824] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[ 0.662052] hub 6-0:1.0: USB hub found
[ 0.662418] hub 6-0:1.0: 1 port detected
[ 0.663211] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 0.663740] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 7
[ 0.664546] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x000000000201000
[ 0.665422] xhci-hcd xhci-hcd.1.auto: irq 231, io mem 0xfe900000
[ 0.666645] hub 7-0:1.0: USB hub found
[ 0.667012] hub 7-0:1.0: 1 port detected
[ 0.667666] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 0.668166] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 8
[ 0.668856] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed
[ 0.669488] usb usb8: We don't know the algorithms for LPM for this host, disabling LPM.
[ 0.670727] hub 8-0:1.0: USB hub found
[ 0.671100] hub 8-0:1.0: 1 port detected
[ 0.672295] usbcore: registered new interface driver usb-storage
[ 0.678095] i2c /dev entries driver
[ 0.685093] rk808 0-001b: chip id: 0x0
[ 0.689719] rk808-regulator rk808-regulator: there is no dvs0 gpio
[ 0.690298] rk808-regulator rk808-regulator: there is no dvs1 gpio
[ 0.690916] DCDC_REG1: supplied by vcc5v0_sys
[ 0.692195] DCDC_REG2: supplied by vcc5v0_sys
[ 0.693081] DCDC_REG3: supplied by vcc5v0_sys
[ 0.693701] DCDC_REG4: supplied by vcc5v0_sys
[ 0.694632] LDO_REG1: supplied by vcc5v0_sys
[ 0.696202] LDO_REG2: supplied by vcc5v0_sys
[ 0.697486] LDO_REG3: supplied by vcc5v0_sys
[ 0.698930] LDO_REG4: supplied by vcc5v0_sys
[ 0.700382] LDO_REG5: supplied by vcc5v0_sys
[ 0.701668] LDO_REG6: supplied by vcc5v0_sys
[ 0.703113] LDO_REG7: supplied by vcc5v0_sys
[ 0.704437] LDO_REG8: supplied by vcc5v0_sys
[ 0.705856] SWITCH_REG1: supplied by vcc3v3_sys
[ 0.706516] SWITCH_REG2: supplied by vcc3v3_sys
[ 0.709205] fan53555-regulator 0-0040: FAN53555 Option[8] Rev[1] Detected!
[ 0.709852] fan53555-reg: supplied by vcc5v0_sys
[ 0.711550] vcc1v8_s3: supplied by vcc_1v8
[ 0.713436] fan53555-regulator 0-0041: FAN53555 Option[8] Rev[1] Detected!
[ 0.714070] fan53555-reg: supplied by vcc5v0_sys
[ 0.728331] energy_model: pd0: hertz/watts ratio non-monotonically decreasing: em_cap_state 1 >= em_c0
[ 0.733693] sdhci: Secure Digital Host Controller Interface driver
[ 0.734242] sdhci: Copyright(c) Pierre Ossman
[ 0.734927] Synopsys Designware Multimedia Card Interface Driver
[ 0.736068] dwmmc_rockchip fe310000.mmc: IDMAC supports 32-bit address mode.
[ 0.736698] dwmmc_rockchip fe310000.mmc: Using internal DMA controller.
[ 0.737286] dwmmc_rockchip fe310000.mmc: Version ID is 270a
[ 0.737795] dwmmc_rockchip fe310000.mmc: DW MMC controller at irq 28,32 bit host data width,256 deep o
[ 0.738723] dwmmc_rockchip fe310000.mmc: allocated mmc-pwrseq
[ 0.739228] mmc_host mmc0: card is non-removable.
[ 0.752684] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[ 0.766618] dwmmc_rockchip fe320000.mmc: IDMAC supports 32-bit address mode.
[ 0.767259] dwmmc_rockchip fe320000.mmc: Using internal DMA controller.
[ 0.767856] dwmmc_rockchip fe320000.mmc: Version ID is 270a
[ 0.768389] dwmmc_rockchip fe320000.mmc: DW MMC controller at irq 29,32 bit host data width,256 deep o
[ 0.769334] dwmmc_rockchip fe320000.mmc: Got CD GPIO
[ 0.781942] random: fast init done
[ 0.782468] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[ 0.796001] mmc_host mmc0: Bus speed (slot 0) = 300000Hz (slot req 300000Hz, actual 300000HZ div = 0)
[ 0.798116] sdhci-pltfm: SDHCI platform and OF driver helper
[ 0.799495] mmc2: CQHCI version 5.10
[ 0.825707] mmc2: SDHCI controller on fe330000.sdhci [fe330000.sdhci] using ADMA
[ 0.828434] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.830154] usbcore: registered new interface driver usbhid
[ 0.830644] usbhid: USB HID core driver
[ 0.834764] NET: Registered protocol family 17
[ 0.835289] 9pnet: Installing 9P2000 support
[ 0.835701] Key type dns_resolver registered
[ 0.836399] registered taskstats version 1
[ 0.836762] Loading compiled-in X.509 certificates
[ 0.839531] mmc_host mmc0: Bus speed (slot 0) = 200000Hz (slot req 200000Hz, actual 200000HZ div = 0)
[ 0.852670] input: gpio-keys as /devices/platform/gpio-keys/input/input0
[ 0.854138] ALSA device list:
[ 0.854409] No soundcards found.
[ 0.854856] dw-apb-uart ff1a0000.serial: forbid DMA for kernel console
[ 0.855508] Waiting for root device /dev/mmcblk0p4...
[ 0.865101] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ di)
[ 0.866336] mmc1: new high speed SDHC card at address aaaa
[ 0.867456] mmcblk1: mmc1:aaaa SU04G 3.69 GiB
[ 0.881424] mmcblk1: p1 p2 p3 p4
[ 0.891087] mmc_host mmc0: Bus speed (slot 0) = 100000Hz (slot req 100000Hz, actual 100000HZ div = 0)
[ 134.791456] random: crng init done
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment