boot log of corrupt avocent mpu108e

boot.log

U-Boot version:U-Boot 1.3.0-rc3 (Jul  9 2012 - 13:31:11) Polaris 1.9.16473


AVODSR
Serial Number:0520098820
EID:520601-0010AB-0000
MAC Addr 1:00:E0:86:1C:69:19
MAC Addr 2:00:E0:86:1C:69:1A
Current Firmware Version  :1.14.0.19936
Alternate Firmware Version:1.14.0.19936
Hit any key to stop autoboot:+++

Booting:1.14.0.19936























Avocent MPU108E

Entering Persistent Debug...


Press any key to disable debug messages
  and enter Console Menu
<30>Jul  9 13:33:07 dhclient: Listening on LPF/bond0/00:e0:86:xx:xx:xx
<30>Jul  9 13:33:07 dhclient: Sending on   LPF/bond0/00:e0:86:xx:xx:xx
<30>Jul  9 13:33:07 dhclient: Sending on   Socket/fallback
<30>Jul  9 13:33:09 dhclient: DHCPDISCOVER on bond0 to 255.255.255.255 port 67 interval 3
<30>Jul  9 13:33:12 dhclient: DHCPDISCOVER on bond0 to 255.255.255.255 port 67 interval 7
<30>Jul  9 13:33:12 dhclient: DHCPOFFER from 192.0.2.1
<30>Jul  9 13:33:12 dhclient: DHCPREQUEST on bond0 to 255.255.255.255 port 67
<30>Jul  9 13:33:12 dhclient: DHCPACK from 192.0.2.1
<30>Jul  9 13:33:12 dhclient: bound to 192.0.2.100 -- renewal in 36367 seconds.
ipConfigGet ipStatus = 10x
sys_info.c: Sent all Dmodule system information to Mmodule
ipConfigGet ipStatus = 10x
LanParmsInit(DHCPv4): IP: 192.0.2.100, Mask: 255.255.255.0, GW: 192.0.2.1
--------> ipStatus : 10:6:0
LanIpstatus = 1: 10: 1
ERROR: Could not open exit macro file 
dnsConfigGet address 192.0.2.1
vidFpgaSetNoiseCompensation: need to run setNoise for all active sessions???

comSpcDeviceTable_init spcIdx = 0, devTableIdx = 1, model_type = 0, modelName = None

ReadSpcFromFlash: no file named spc1device

comSpcDeviceTable_init spcIdx = 1, devTableIdx = 2, model_type = 0, modelName = None

ReadSpcFromFlash: no file named spc2device
MibInit done
readIPv6NetworkParmsFile...
ipConfigGet ipStatus = 10x
readIPv6NetworkParmsFile...
DsmibGetSessionPreemptionTimeout returns 0
rcmRequestDeviceNamesTable()
DsmibGetSessionPreemptionTimeout returns 0
rcmSendApplianceSettingMsg: setting= 1, value 00, len 1
rcmSendApplianceSettingMsg: setting= 14, value 01, len 1
rcmSendApplianceSettingMsg: setting= 15, value 00, len 1
rcmSendApplianceSettingMsg: setting= 16, value 01, len 1
rcmSendApplianceSettingMsg: setting= 17, value 00, len 1
rcmSendApplianceSettingMsg: setting= 2, value 0F, len 1
Sent 6 settings to main board during initialization
*** Exit Macro transfer to main board started ***
Waiting at FIFO for PPP online
ReadSpcGlobalsFromFlash: no file named spcglobal
spcThread( 1 ) started
spcThread( 2 ) started
ipConfigGet ipStatus = 10x
DsmibInitNetworkParms....
bootp1,dhcp1,dhcpc2: 1,2,1, ipmode1=06, ipmode2=00, dnsmode= 00
TCP_Listen() ADDR_ANY
ASMP TCP Server listening at ::/3211 (v6)...
ADSAP2_initialize_globals
ADSAP2_initialize_list
/etc/dsview_cert file not found
/etc/appliance_cert file not found
/etc/appliance_key file not found
TCP_Listen() ADDR_ANY
ADSAP2 TCP Server listening at ::/3871 (v6)...
Waiting for ADSAP2 connection...
apcpConnectServer
TCP_Listen() ADDR_ANY
APCP TCP Server listening at ::/2068 (v6)...
Waiting for APCP connection...
flash_update: finished SNMP
rcmMainBoardIsNowReady
Set Appliance Status to appliance_ready 
webserverWatchdogThread started ...
snmpThread() SNMP ENABLED
<181>mini_httpd(1188): [main] AEWS/1.0 starting on 127.0.0.1, port 2828
<181>mini_httpd(1206): [main] AEWS/1.0 starting on ::, port 443
<181>mini_httpd(1219): [main] AEWS/1.0 starting on ::, port 80

Watchdog reset occurred.