Created
December 6, 2016 09:03
-
-
Save pandax381/a55c9e97fa06e5d06c90234c077f3689 to your computer and use it in GitHub Desktop.
orangepi one boot log with self build u-boot and busybox
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
U-Boot SPL 2016.11 (Dec 06 2016 - 07:54:39) | |
DRAM: 512 MiB | |
Trying to boot from MMC1 | |
U-Boot 2016.11 (Dec 06 2016 - 07:54:39 +0000) Allwinner Technology | |
CPU: Allwinner H3 (SUN8I 1680) | |
Model: Xunlong Orange Pi One | |
DRAM: 512 MiB | |
MMC: SUNXI SD/MMC: 0 | |
*** Warning - bad CRC, using default environment | |
In: serial | |
Out: serial | |
Err: serial | |
Net: phy interface0 | |
eth0: ethernet@1c30000 | |
starting USB... | |
USB0: USB EHCI 1.00 | |
USB1: USB OHCI 1.0 | |
scanning bus 0 for devices... 1 USB Device(s) found | |
Hit any key to stop autoboot: 0 | |
switch to partitions #0, OK | |
mmc0 is current device | |
Scanning mmc 0:1... | |
Found U-Boot script /boot.scr | |
reading /boot.scr | |
1795 bytes read in 19 ms (91.8 KiB/s) | |
## Executing script at 43100000 | |
gpio: pin PL10 (gpio 298) value is 1 | |
Warning: value of pin is still 0 | |
gpio: pin PG11 (gpio 203) value is 1 | |
reading .next | |
** Unable to read file .next ** | |
reading /boot/.next | |
** Unable to read file /boot/.next ** | |
reading /script.bin | |
35908 bytes read in 26 ms (1.3 MiB/s) | |
reading /uInitrd | |
851191 bytes read in 65 ms (12.5 MiB/s) | |
reading /zImage | |
5025168 bytes read in 245 ms (19.6 MiB/s) | |
## Loading init Ramdisk from Legacy Image at 43300000 ... | |
Image Name: initramfs | |
Image Type: ARM Linux RAMDisk Image (uncompressed) | |
Data Size: 851127 Bytes = 831.2 KiB | |
Load Address: 00000000 | |
Entry Point: 00000000 | |
Verifying Checksum ... OK | |
Using machid 0x1029 from environment | |
Starting kernel ... | |
[sun8i_fixup]: From boot, get meminfo: | |
Start: 0x40000000 | |
Size: 512MB | |
ion_carveout reserve: 160m@0 256m@0 130m@1 200m@1 | |
ion_reserve_select: ion chipid [0x2004620! | |
ion_reserve_common: ion reserve: [0x56000000, 0x60000000]! | |
[ 0.000000] Booting Linux on physical CPU 0 | |
[ 0.000000] Initializing cgroup subsys cpuset | |
[ 0.000000] Initializing cgroup subsys cpu | |
[ 0.000000] Linux version 3.4.112-sun8i (root@xenial) (gcc version 5.4.0 20160609 (Ubuntu/Linaro 5.4.0-6ubuntu1~16.04.1) ) #14 SMP PREEMPT Wed Sep 14 20:29:31 CEST 2016 | |
[ 0.000000] cma: CMA: reserved 160 MiB at 56000000 | |
[ 0.000000] PERCPU: Embedded 8 pages/cpu @c0fef000 s11968 r8192 d12608 u32768 | |
[ 0.000000] Kernel command line: console=ttyS0,115200 rootwait cgroup_enable=memory swapaccount=1 sunxi_ve_mem_reserve=0 sunxi_g2d_mem_reserve=0 sunxi_no_mali_mem_reserve sunxi_fb_mem_reserve=16 panic=10 consoleblank=0 enforcing=0 loglevel=7 | |
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) | |
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) | |
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) | |
[ 0.000000] allocated 1048576 bytes of page_cgroup | |
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups | |
[ 0.000000] Memory: 512MB = 512MB total | |
[ 0.000000] Memory: 341168k/341168k available, 183120k reserved, 0K highmem | |
[ 0.000000] Virtual kernel memory layout: | |
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) | |
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) | |
[ 0.000000] vmalloc : 0xe0800000 - 0xff000000 ( 488 MB) | |
[ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB) | |
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) | |
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) | |
[ 0.000000] .text : 0xc0008000 - 0xc095bce8 (9552 kB) | |
[ 0.000000] .init : 0xc095c000 - 0xc09aeec0 ( 332 kB) | |
[ 0.000000] .data : 0xc09b0000 - 0xc0a29750 ( 486 kB) | |
[ 0.000000] .bss : 0xc0a29f04 - 0xc0b5cf90 (1229 kB) | |
[ 0.000000] Preemptible hierarchical RCU implementation. | |
[ 0.000000] Additional per-CPU info printed with stalls. | |
[ 0.000000] NR_IRQS:544 | |
[ 0.000000] Architected local timer running at 24.00MHz. | |
[ 0.000000] Switching to timer-based delay loop | |
[ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms | |
[ 0.000000] Console: colour dummy device 80x30 | |
[ 0.000196] Calibrating delay loop (skipped), value calculated using timer frequency.. 4800.00 BogoMIPS (lpj=24000000) | |
[ 0.000220] pid_max: default: 32768 minimum: 301 | |
[ 0.000557] Mount-cache hash table entries: 512 | |
[ 0.001519] Initializing cgroup subsys cpuacct | |
[ 0.001535] Initializing cgroup subsys memory | |
[ 0.001581] Initializing cgroup subsys devices | |
[ 0.001592] Initializing cgroup subsys freezer | |
[ 0.001603] Initializing cgroup subsys blkio | |
[ 0.001627] Initializing cgroup subsys perf_event | |
[ 0.001707] CPU: Testing write buffer coherency: ok | |
[ 0.001759] ftrace: allocating 25740 entries in 76 pages | |
[ 0.030291] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 | |
[ 0.030308] [sunxi_smp_prepare_cpus] enter | |
[ 0.030345] Setting up static identity map for 0x40691938 - 0x40691990 | |
[ 0.031273] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 | |
[ 0.031406] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 | |
[ 0.040476] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 | |
[ 0.040596] Brought up 4 CPUs | |
[ 0.040596] SMP: Total of 4 processors activated (19200.00 BogoMIPS). | |
[ 0.040893] devtmpfs: initialized | |
[ 0.050444] wakeup src cnt is : 2. | |
[ 0.050521] sunxi pm init | |
[ 0.050657] pinctrl core: initialized pinctrl subsystem | |
[ 0.056993] NET: Registered protocol family 16 | |
[ 0.057870] DMA: preallocated 2048 KiB pool for atomic coherent allocations | |
[ 0.057870] script_sysfs_init success | |
[ 0.057870] gpiochip_add: registered GPIOs 0 to 383 on device: sunxi-pinctrl | |
[ 0.057870] sunxi-pinctrl sunxi-pinctrl: initialized sunXi PIO driver | |
[ 0.057870] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. | |
[ 0.057870] hw-breakpoint: maximum watchpoint size is 8 bytes. | |
[ 0.057870] script config pll_video to 297 Mhz | |
[ 0.057870] script config pll_de to 864 Mhz | |
[ 0.057870] script config pll_ve to 402 Mhz | |
[ 0.062531] bio: create slab <bio-0> at 0 | |
[ 0.062531] [ARISC] :sunxi-arisc driver v1.04 | |
[ 0.086439] [ARISC] :arisc version: [v0.1.58] | |
[ 0.172250] [ARISC] :sunxi-arisc driver v1.04 startup succeeded | |
[ 0.173839] SCSI subsystem initialized | |
[ 0.173839] usbcore: registered new interface driver usbfs | |
[ 0.173839] usbcore: registered new interface driver hub | |
[ 0.173839] usbcore: registered new device driver usb | |
[ 0.173839] twi_chan_cfg()340 - [twi0] has no twi_regulator. | |
[ 0.173839] twi_chan_cfg()340 - [twi1] has no twi_regulator. | |
[ 0.173839] twi_chan_cfg()340 - [twi2] has no twi_regulator. | |
[ 0.173839] Linux video capture interface: v2.00 | |
[ 0.173839] Advanced Linux Sound Architecture Driver Version 1.0.25. | |
[ 0.173839] cfg80211: Calling CRDA to update world regulatory domain | |
[ 0.173839] Switching to clocksource arch_sys_counter | |
[ 0.183887] FS-Cache: Loaded | |
[ 0.184168] CacheFiles: Loaded | |
[ 0.195282] NET: Registered protocol family 2 | |
[ 0.206500] IP route cache hash table entries: 4096 (order: 2, 16384 bytes) | |
[ 0.207053] TCP established hash table entries: 16384 (order: 5, 131072 bytes) | |
[ 0.207298] TCP bind hash table entries: 16384 (order: 5, 196608 bytes) | |
[ 0.207573] TCP: Hash tables configured (established 16384 bind 16384) | |
[ 0.207585] TCP: reno registered | |
[ 0.207596] UDP hash table entries: 256 (order: 1, 8192 bytes) | |
[ 0.207622] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) | |
[ 0.207949] NET: Registered protocol family 1 | |
[ 0.208360] RPC: Registered named UNIX socket transport module. | |
[ 0.208373] RPC: Registered udp transport module. | |
[ 0.208381] RPC: Registered tcp transport module. | |
[ 0.208389] RPC: Registered tcp NFSv4.1 backchannel transport module. | |
[ 0.208578] Trying to unpack rootfs image as initramfs... | |
[ 0.271489] Freeing initrd memory: 828K | |
[ 0.271959] hw perfevents: enabled with ARMv7 Cortex_A7 PMU driver, 5 counters available | |
[ 0.272085] sunxi_reg_init enter | |
[ 0.272981] audit: initializing netlink socket (disabled) | |
[ 0.273029] type=2000 audit(0.270:1): initialized | |
[ 0.274851] squashfs: version 4.0 (2009/01/31) Phillip Lougher | |
[ 0.275751] NFS: Registering the id_resolver key type | |
[ 0.276140] nfs4filelayout_init: NFSv4 File Layout Driver Registering... | |
[ 0.276153] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). | |
[ 0.276906] NTFS driver 2.1.30 [Flags: R/W]. | |
[ 0.277214] fuse init (API version 7.18) | |
[ 0.277971] Btrfs loaded | |
[ 0.277994] msgmni has been set to 987 | |
[ 0.279403] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) | |
[ 0.279421] io scheduler noop registered | |
[ 0.279430] io scheduler deadline registered | |
[ 0.279508] io scheduler cfq registered (default) | |
[ 0.279906] [DISP]disp_module_init | |
[ 0.280262] cmdline,init_disp= | |
[ 0.280292] cmdline,disp= | |
[ 0.287979] [DISP] Fb_map_kernel_logo,line:932:Fb_map_kernel_logo failed! | |
[ 0.304361] Console: switching to colour frame buffer device 160x45 | |
[ 0.321697] [DISP]disp_module_init finish | |
[ 0.321923] sw_uart_get_devinfo()1503 - uart0 has no uart_regulator. | |
[ 0.322227] uart0: ttyS0 at MMIO 0x1c28000 (irq = 32) is a SUNXI | |
[ 0.322240] sw_uart_pm()890 - uart0 clk is already enable | |
[ 0.322258] sw_console_setup()1233 - console setup baud 115200 parity n bits 8, flow n | |
[ 0.433238] console [ttyS0] enabled | |
[ 1.070537] brd: module loaded | |
[ 1.077822] loop: module loaded | |
[ 1.081691] sunxi_spi_chan_cfg()1376 - [spi-0] has no spi_regulator. | |
[ 1.088745] sunxi_spi_chan_cfg()1376 - [spi-1] has no spi_regulator. | |
[ 1.096387] spi spi0: master is unqueued, this is deprecated | |
[ 1.102997] tun: Universal TUN/TAP device driver, 1.6 | |
[ 1.108601] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> | |
[ 1.116418] PPP generic driver version 2.4.2 | |
[ 1.121373] PPP BSD Compression module registered | |
[ 1.126592] PPP Deflate Compression module registered | |
[ 1.133007] PPP MPPE Compression module registered | |
[ 1.138329] NET: Registered protocol family 24 | |
[ 1.143331] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver | |
[ 1.170661] sunxi-ehci sunxi-ehci.1: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver | |
[ 1.179567] sunxi-ehci sunxi-ehci.1: new USB bus registered, assigned bus number 1 | |
[ 1.188533] sunxi-ehci sunxi-ehci.1: irq 104, io mem 0xf1c1a000 | |
[ 1.210032] sunxi-ehci sunxi-ehci.1: USB 0.0 started, EHCI 1.00 | |
[ 1.217223] hub 1-0:1.0: USB hub found | |
[ 1.221415] hub 1-0:1.0: 1 port detected | |
[ 1.246159] sunxi-ehci sunxi-ehci.2: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver | |
[ 1.255072] sunxi-ehci sunxi-ehci.2: new USB bus registered, assigned bus number 2 | |
[ 1.263960] sunxi-ehci sunxi-ehci.2: irq 106, io mem 0xf1c1b000 | |
[ 1.290030] sunxi-ehci sunxi-ehci.2: USB 0.0 started, EHCI 1.00 | |
[ 1.297097] hub 2-0:1.0: USB hub found | |
[ 1.301284] hub 2-0:1.0: 1 port detected | |
[ 1.326075] sunxi-ehci sunxi-ehci.3: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver | |
[ 1.334991] sunxi-ehci sunxi-ehci.3: new USB bus registered, assigned bus number 3 | |
[ 1.343862] sunxi-ehci sunxi-ehci.3: irq 108, io mem 0xf1c1c000 | |
[ 1.370031] sunxi-ehci sunxi-ehci.3: USB 0.0 started, EHCI 1.00 | |
[ 1.377130] hub 3-0:1.0: USB hub found | |
[ 1.381318] hub 3-0:1.0: 1 port detected | |
[ 1.406062] sunxi-ehci sunxi-ehci.4: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver | |
[ 1.414974] sunxi-ehci sunxi-ehci.4: new USB bus registered, assigned bus number 4 | |
[ 1.423877] sunxi-ehci sunxi-ehci.4: irq 110, io mem 0xf1c1d000 | |
[ 1.450037] sunxi-ehci sunxi-ehci.4: USB 0.0 started, EHCI 1.00 | |
[ 1.457125] hub 4-0:1.0: USB hub found | |
[ 1.461311] hub 4-0:1.0: 1 port detected | |
[ 1.466038] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver | |
[ 1.492965] sunxi-ohci sunxi-ohci.1: SW USB2.0 'Open' Host Controller (OHCI) Driver | |
[ 1.501491] sunxi-ohci sunxi-ohci.1: new USB bus registered, assigned bus number 5 | |
[ 1.509912] sunxi-ohci sunxi-ohci.1: irq 105, io mem 0xf1c1a400 | |
[ 1.574533] hub 5-0:1.0: USB hub found | |
[ 1.578701] hub 5-0:1.0: 1 port detected | |
[ 1.603442] sunxi-ohci sunxi-ohci.2: SW USB2.0 'Open' Host Controller (OHCI) Driver | |
[ 1.611965] sunxi-ohci sunxi-ohci.2: new USB bus registered, assigned bus number 6 | |
[ 1.620403] sunxi-ohci sunxi-ohci.2: irq 107, io mem 0xf1c1b400 | |
[ 1.684611] hub 6-0:1.0: USB hub found | |
[ 1.688782] hub 6-0:1.0: 1 port detected | |
[ 1.713531] sunxi-ohci sunxi-ohci.3: SW USB2.0 'Open' Host Controller (OHCI) Driver | |
[ 1.722055] sunxi-ohci sunxi-ohci.3: new USB bus registered, assigned bus number 7 | |
[ 1.730491] sunxi-ohci sunxi-ohci.3: irq 109, io mem 0xf1c1c400 | |
[ 1.794617] hub 7-0:1.0: USB hub found | |
[ 1.798786] hub 7-0:1.0: 1 port detected | |
[ 1.823592] sunxi-ohci sunxi-ohci.4: SW USB2.0 'Open' Host Controller (OHCI) Driver | |
[ 1.832121] sunxi-ohci sunxi-ohci.4: new USB bus registered, assigned bus number 8 | |
[ 1.840555] sunxi-ohci sunxi-ohci.4: irq 111, io mem 0xf1c1d400 | |
[ 1.904545] hub 8-0:1.0: USB hub found | |
[ 1.908714] hub 8-0:1.0: 1 port detected | |
[ 1.913439] Initializing USB Mass Storage driver... | |
[ 1.919068] usbcore: registered new interface driver usb-storage | |
[ 1.925776] USB Mass Storage support registered. | |
[ 1.930962] usbcore: registered new interface driver ums-alauda | |
[ 1.937567] usbcore: registered new interface driver ums-cypress | |
[ 1.944288] usbcore: registered new interface driver ums-datafab | |
[ 1.951066] usbcore: registered new interface driver ums_eneub6250 | |
[ 1.957962] usbcore: registered new interface driver ums-freecom | |
[ 1.964721] usbcore: registered new interface driver ums-isd200 | |
[ 1.971388] usbcore: registered new interface driver ums-jumpshot | |
[ 1.978185] usbcore: registered new interface driver ums-karma | |
[ 1.984712] usbcore: registered new interface driver ums-onetouch | |
[ 1.991543] usbcore: registered new interface driver ums-realtek | |
[ 1.998248] usbcore: registered new interface driver ums-sddr09 | |
[ 2.004870] usbcore: registered new interface driver ums-sddr55 | |
[ 2.011569] usbcore: registered new interface driver ums-usbat | |
[ 2.018830] mousedev: PS/2 mouse device common for all mice | |
[ 2.025243] sunxikbd_init failed. | |
[ 2.029518] ls_fetch_sysconfig_para: type err device_used = -1073060220. | |
[ 2.037174] =========script_get_err============ | |
[ 2.042533] [RTC] WARNING: Rtc time will be wrong!! | |
[ 2.047943] [RTC] WARNING: use *internal OSC* as clock source | |
[ 2.054587] sunxi-rtc sunxi-rtc: rtc core: registered sunxi-rtc as rtc0 | |
[ 2.061983] i2c /dev entries driver | |
[ 2.066254] IR RC5(x) protocol handler initialized | |
[ 2.072193] sunxi_i2c_do_xfer()985 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x18) | |
[ 2.081549] sunxi_i2c_do_xfer()985 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x19) | |
[ 2.090895] sunxi_i2c_do_xfer()985 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x1a) | |
[ 2.100237] sunxi_i2c_do_xfer()985 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x29) | |
[ 2.109565] sunxi_i2c_do_xfer()985 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x2a) | |
[ 2.118909] sunxi_i2c_do_xfer()985 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x2b) | |
[ 2.128251] sunxi_i2c_do_xfer()985 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x4c) | |
[ 2.137594] sunxi_i2c_do_xfer()985 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x4d) | |
[ 2.146936] sunxi_i2c_do_xfer()985 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x4e) | |
[ 2.156310] sunxi_i2c_do_xfer()985 - [i2c1] incomplete xfer (status: 0x20, dev addr: 0x18) | |
[ 2.165681] sunxi_i2c_do_xfer()985 - [i2c1] incomplete xfer (status: 0x20, dev addr: 0x19) | |
[ 2.175051] sunxi_i2c_do_xfer()985 - [i2c1] incomplete xfer (status: 0x20, dev addr: 0x1a) | |
[ 2.184422] sunxi_i2c_do_xfer()985 - [i2c1] incomplete xfer (status: 0x20, dev addr: 0x29) | |
[ 2.193792] sunxi_i2c_do_xfer()985 - [i2c1] incomplete xfer (status: 0x20, dev addr: 0x2a) | |
[ 2.203159] sunxi_i2c_do_xfer()985 - [i2c1] incomplete xfer (status: 0x20, dev addr: 0x2b) | |
[ 2.212530] sunxi_i2c_do_xfer()985 - [i2c1] incomplete xfer (status: 0x20, dev addr: 0x4c) | |
[ 2.221901] sunxi_i2c_do_xfer()985 - [i2c1] incomplete xfer (status: 0x20, dev addr: 0x4d) | |
[ 2.231272] sunxi_i2c_do_xfer()985 - [i2c1] incomplete xfer (status: 0x20, dev addr: 0x4e) | |
[ 2.240462] sunxi_wdt_init_module: sunxi WatchDog Timer Driver v1.0 | |
[ 2.247573] sunxi_wdt_probe: devm_ioremap return wdt_reg 0xf1c20ca0, res->start 0x01c20ca0, res->end 0x01c20cbf | |
[ 2.258739] sunxi_wdt_probe: initialized (g_timeout=16s, g_nowayout=0) | |
[ 2.266198] wdt_enable, write reg 0xf1c20cb8 val 0x00000000 | |
[ 2.272396] timeout_to_interv, line 167 | |
[ 2.276649] interv_to_timeout, line 189 | |
[ 2.280916] wdt_set_tmout, write 0x000000b0 to mode reg 0xf1c20cb8, actual timeout 16 sec | |
[ 2.290429] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com | |
[ 2.300040] [cpu_freq] ERR:get cpu extremity frequency from sysconfig failed, use max_freq | |
[ 2.315110] no blue_led, ignore it! | |
[ 2.319332] no led_0, ignore it! | |
[ 2.322931] no led_1, ignore it! | |
[ 2.326510] no led_2, ignore it! | |
[ 2.330110] no led_3, ignore it! | |
[ 2.333688] no led_4, ignore it! | |
[ 2.337264] no led_5, ignore it! | |
[ 2.340854] no led_6, ignore it! | |
[ 2.344430] no led_7, ignore it! | |
[ 2.348813] usbcore: registered new interface driver usbhid | |
[ 2.355039] usbhid: USB HID core driver | |
[ 2.363705] asoc: sndcodec <-> sunxi-codec mapping ok | |
[ 2.370249] [DAUDIO]sunxi-daudio cannot find any using configuration for controllers, return directly! | |
[ 2.380808] [I2S]snddaudio cannot find any using configuration for controllers, return directly! | |
[ 2.390577] [DAUDIO0] driver not init,just return. | |
[ 2.393652] mmc0: new high speed SDHC card at address 59b4 | |
[ 2.402044] mmcblk0: mmc0:59b4 USDU1 30.0 GiB | |
[ 2.408181] mmcblk0: p1 | |
[ 2.411678] mmcblk mmc0:59b4: Card claimed for testing. | |
[ 2.411872] asoc: sndhdmi <-> sunxi-hdmiaudio.0 mapping ok | |
[ 2.412937] oprofile: using arm/armv7-ca7 | |
[ 2.428025] mmc0:59b4: USDU1 30.0 GiB | |
[ 2.428052] u32 classifier | |
[ 2.428059] Performance counters on | |
[ 2.428065] input device check on | |
[ 2.428070] Actions configured | |
[ 2.428252] IPv4 over IPv4 tunneling driver | |
[ 2.428882] TCP: bic registered | |
[ 2.428892] TCP: cubic registered | |
[ 2.428898] TCP: westwood registered | |
[ 2.428904] TCP: highspeed registered | |
[ 2.428910] TCP: hybla registered | |
[ 2.428917] TCP: htcp registered | |
[ 2.428923] TCP: vegas registered | |
[ 2.428929] TCP: veno registered | |
[ 2.428935] TCP: scalable registered | |
[ 2.428941] TCP: lp registered | |
[ 2.428947] TCP: yeah registered | |
[ 2.428954] TCP: illinois registered | |
[ 2.428960] Initializing XFRM netlink socket | |
[ 2.501082] *******************sd init ok******************* | |
[ 2.507506] NET: Registered protocol family 10 | |
[ 2.513610] NET: Registered protocol family 17 | |
[ 2.518563] NET: Registered protocol family 15 | |
[ 2.523559] Registering the dns_resolver key type | |
[ 2.529183] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5 | |
[ 2.537714] ThumbEE CPU extension supported. | |
[ 2.542481] Registering SWP/SWPB emulation handler | |
[ 2.548345] registered taskstats version 1 | |
[ 2.553388] cmdline,disp= | |
[ 2.587364] ths_fetch_sysconfig_para: type err device_used = 1. | |
[ 2.595412] CPU Budget:corekeeper enabled | |
[ 2.600207] CPU Budget:Register notifier | |
[ 2.604561] CPU Budget:register Success | |
[ 2.608816] sunxi-budget-cooling sunxi-budget-cooling: Cooling device registered: thermal-budget-0 | |
[ 2.622066] ALSA device list: | |
[ 2.625357] #0: audiocodec | |
[ 2.628548] #1: sndhdmi | |
[ 2.632324] Freeing init memory: 328K | |
[ 3.190055] [DISP] disp_device_attached_and_enable,line:159:attched ok, mgr0<-->device0, type=4, mode=5 | |
BusyBox v1.22.1 (Raspbian 1:1.22.0-9+deb8u1) built-in shell (ash) | |
Enter 'help' for a list of built-in commands. | |
/ # |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment