Vectric configuration file for Shapeoko (mm, with arcs)

Shapeoko_mm.pp

+================================================
+                                                
+    Vectric machine output configuration file   
+                                                
+================================================
+                                                
+ History                                        
+                                                  
+ Who      When       What                         
+ ======== ========== ===========================
+ Paul K.  10/01/2013 Written                      
+================================================

POST_NAME = "Shapeoko (mm) (*.gcode)"

FILE_EXTENSION = "gcode"

UNITS = "MM"

+------------------------------------------------
+    Line terminating characters                 
+------------------------------------------------

LINE_ENDING = "[13][10]"

+------------------------------------------------
+    Block numbering                             
+------------------------------------------------

LINE_NUMBER_START     = 0
LINE_NUMBER_INCREMENT = 10
LINE_NUMBER_MAXIMUM = 999999

+================================================
+                                                
+    Formating for variables                     
+                                                
+================================================

VAR LINE_NUMBER = [N|A|N|1.0]
VAR SPINDLE_SPEED = [S|A|S|1.0]
VAR FEED_RATE = [F|C|F|1.1]
VAR X_POSITION = [X|C|X|1.4]
VAR Y_POSITION = [Y|C|Y|1.4]
VAR Z_POSITION = [Z|C|Z|1.4]
VAR ARC_CENTRE_I_INC_POSITION = [I|A|I|1.4]
VAR ARC_CENTRE_J_INC_POSITION = [J|A|J|1.4]
VAR X_HOME_POSITION = [XH|A|X|1.4]
VAR Y_HOME_POSITION = [YH|A|Y|1.4]
VAR Z_HOME_POSITION = [ZH|A|Z|1.4]

+================================================
+                                                
+    Block definitions for toolpath output       
+                                                
+================================================

+---------------------------------------------------
+  Commands output at the start of the file
+---------------------------------------------------

begin HEADER

"T1M6"
"G17"
"G20"
"G0 [ZH]"
"G0 [XH] [YH] [S] M3"


+---------------------------------------------------
+  Commands output for rapid moves 
+---------------------------------------------------

begin RAPID_MOVE

"G0 [X] [Y] [Z]"


+---------------------------------------------------
+  Commands output for the first feed rate move
+---------------------------------------------------

begin FIRST_FEED_MOVE

"G1 [X] [Y] [Z] [F]"


+---------------------------------------------------
+  Commands output for feed rate moves
+---------------------------------------------------

begin FEED_MOVE

"G1 [X] [Y] [Z]"


+---------------------------------------------------
+  Commands output for the first clockwise arc move
+---------------------------------------------------

begin FIRST_CW_ARC_MOVE

"G2 [X] [Y] [I] [J] [F]"


+---------------------------------------------------
+  Commands output for clockwise arc  move
+---------------------------------------------------

begin CW_ARC_MOVE

"G2 [X] [Y] [I] [J]"


+---------------------------------------------------
+  Commands output for the first counterclockwise arc move
+---------------------------------------------------

begin FIRST_CCW_ARC_MOVE

"G3 [X] [Y] [I] [J] [F]"


+---------------------------------------------------
+  Commands output for counterclockwise arc  move
+---------------------------------------------------

begin CCW_ARC_MOVE

"G3 [X] [Y] [I] [J]"


+---------------------------------------------------
+  Commands output at the end of the file
+---------------------------------------------------

begin FOOTER

"G0 [ZH]"
"G0 [XH] [YH]"
"M30"

G20 has to be changed to G21 since units are MM.