-
-
Save pdp7/18bec30b3d5b23d52f9422a61b931d52 to your computer and use it in GitHub Desktop.
ft6x06_ts | |
Getting the Adafruit PiTFT 2.8″ with capacitive touchscreen working on Hummingboard i2ex | |
http://immerhax.com/?p=27 | |
https://github.com/adafruit/adafruit-raspberrypi-linux/blob/rpi-3.18.y/drivers/input/touchscreen/ft6x06_ts.c | |
adafruit-raspberrypi-linux/drivers/input/touchscreen/ft6x06_ts.c | |
drivers/input/touchscreen/ft6x06_ts.c | |
FocalTech ft6x06 TouchScreen driver. | |
Copyright (c) 2010 Focal tech Ltd. | |
https://learn.adafruit.com/adafruit-2-8-pitft-capacitive-touch?view=all | |
sudo rmmod ft6x06_ts; sudo modprobe ft6x06_ts | |
adafruit-raspberrypi-linux/include/linux/input/ft6x06_ts.h |
I've created this GitHub issue to see if the creator of fbtft, notro, has any advice:
Capactive touch support for Adafruit 2.8" breakout (PID 2090)?
notro/fbtft#409
cdsteinkuehler/beaglebone-universal-io
https://github.com/cdsteinkuehler/beaglebone-universal-io
bbb pin map:
http://beagleboard.org/static/images/cape-headers-spi.png
http://beagleboard.org/static/images/cape-headers.png
Support for Adafruit 2.8" TFT LCD with ILI9341? #400
notro/fbtft#400
bbb fbtft: fb_ili9340 adafruit22a spi debug
https://gist.github.com/pdp7/c62f54573992dfafd003
BeagleBone Black: build fbtft drivers for latest Linux 3.8 kernel
https://www.element14.com/community/community/designcenter/single-board-computers/next-gen_beaglebone/blog/2015/11/19/beaglebone-black-build-fbtft-drivers-for-latest-linux-3813-kernel
Patchwork dt: bindings: Remove focaltech,ft6236 binding
https://patchwork.kernel.org/patch/9269027/
Patchwork [v3] input: touchscreen: Remove duplicate ft6236 driver
https://patchwork.kernel.org/patch/9264845/
notro/rpi-firmware#9
Same here, I'm not able to get the 2.8" cap touch screen working with the default raspberrypi/linux repo. Apparently driver for ft6236 has been dropped into Linux 4.4.y in October 2015, but I'm not sure it's the same as the ft6206. Any way to get it working without using adafruit/linux?