Last active
October 17, 2023 20:26
-
-
Save pdp7/7850027e8d256b6fd9cd53080240f0f6 to your computer and use it in GitHub Desktop.
Linux 6.6-rc6 with TH1520 eMMC patch series boot on BeagleV Ahead
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
brom_ver 8 | |
[APP][E] protocol_connect failed, exit. | |
U-Boot SPL 2020.01-ga239460ff5e5 (Jul 28 2023 - 17:39:55 -0700) | |
FM[1] lpddr4x singlerank freq=3733 64bit dbi_off=n sdram init | |
ddr initialized, jump to uboot | |
image has no header | |
U-Boot 2020.01-ga239460ff5e5 (Jul 28 2023 - 17:39:55 -0700) | |
CPU: rv64imafdcvsu | |
Model: T-HEAD c910 light | |
DRAM: 4 GiB | |
C910 CPU FREQ: 750MHz | |
AHB2_CPUSYS_HCLK FREQ: 250MHz | |
AHB3_CPUSYS_PCLK FREQ: 125MHz | |
PERISYS_AHB_HCLK FREQ: 250MHz | |
PERISYS_APB_PCLK FREQ: 62MHz | |
GMAC PLL POSTDIV FREQ: 1000MHZ | |
DPU0 PLL POSTDIV FREQ: 1188MHZ | |
DPU1 PLL POSTDIV FREQ: 1188MHZ | |
MMC: sdhci@ffe7080000: 0, sd@ffe7090000: 1 | |
Loading Environment from MMC... OK | |
Error reading output register | |
Warning: cannot get lcd-en GPIO | |
LCD panel cannot be found : -121 | |
splash screen startup cost 16 ms | |
In: serial | |
Out: serial | |
Err: serial | |
Net: ethernet@ffe7070000 (eth0) using MAC address - 3a:d7:09:f5:00:49 | |
eth0: ethernet@ffe7070000ethernet@ffe7070000:0 is connected to ethernet@ffe7070000. Reconnecting to ethernet@ffe7060000 | |
ethernet@ffe7060000 (eth1) using MAC address - 3a:d7:09:f5:00:4a | |
, eth1: ethernet@ffe7060000 | |
Hit any key to stop autoboot: 2 1 0 | |
50340 bytes read in 1 ms (48 MiB/s) | |
15748 bytes read in 1 ms (15 MiB/s) | |
138368 bytes read in 2 ms (66 MiB/s) | |
switch to partitions #0, OK | |
mmc0(part 0) is current device | |
Scanning mmc 0:2... | |
Found /extlinux/extlinux.conf | |
Retrieving file: /extlinux/extlinux.conf | |
184 bytes read in 1 ms (179.7 KiB/s) | |
1: Linux eMMC | |
Retrieving file: /Image | |
15640576 bytes read in 39 ms (382.5 MiB/s) | |
append: root=/dev/mmcblk0p3 rootfstype=ext4 rootwait console=ttyS0,115200 loglevel=8 earlycon | |
Retrieving file: /light-beagle.dtb | |
8846 bytes read in 1 ms (8.4 MiB/s) | |
## Flattened Device Tree blob at 46000000 | |
Booting using the fdt blob at 0x46000000 | |
Using Device Tree in place at 0000000046000000, end 000000004600528d | |
Starting kernel ... | |
OpenSBI v1.3-31-g0ad866067d78 | |
____ _____ ____ _____ | |
/ __ \ / ____| _ \_ _| | |
| | | |_ __ ___ _ __ | (___ | |_) || | | |
| | | | '_ \ / _ \ '_ \ \___ \| _ < | | | |
| |__| | |_) | __/ | | |____) | |_) || |_ | |
\____/| .__/ \___|_| |_|_____/|____/_____| | |
| | | |
|_| | |
Platform Name : BeagleV Ahead | |
Platform Features : medeleg | |
Platform HART Count : 4 | |
Platform IPI Device : aclint-mswi | |
Platform Timer Device : aclint-mtimer @ 3000000Hz | |
Platform Console Device : uart8250 | |
Platform HSM Device : --- | |
Platform PMU Device : --- | |
Platform Reboot Device : --- | |
Platform Shutdown Device : --- | |
Platform Suspend Device : --- | |
Platform CPPC Device : --- | |
Firmware Base : 0x0 | |
Firmware Size : 224 KB | |
Firmware RW Offset : 0x20000 | |
Firmware RW Size : 96 KB | |
Firmware Heap Offset : 0x2e000 | |
Firmware Heap Size : 40 KB (total), 2 KB (reserved), 9 KB (used), 28 KB (free) | |
Firmware Scratch Size : 4096 B (total), 760 B (used), 3336 B (free) | |
Runtime SBI Version : 1.0 | |
Domain0 Name : root | |
Domain0 Boot HART : 0 | |
Domain0 HARTs : 0*,1*,2*,3* | |
Domain0 Region00 : 0x000000ffdc008000-0x000000ffdc00bfff M: (I,R,W) S/U: () | |
Domain0 Region01 : 0x000000ffdc000000-0x000000ffdc007fff M: (I,R,W) S/U: () | |
Domain0 Region02 : 0x0000000000000000-0x000000000001ffff M: (R,X) S/U: () | |
Domain0 Region03 : 0x0000000000020000-0x000000000003ffff M: (R,W) S/U: () | |
Domain0 Region04 : 0x0000000000000000-0xffffffffffffffff M: () S/U: (R,W,X) | |
Domain0 Next Address : 0x0000000040200000 | |
Domain0 Next Arg1 : 0x0000000046000000 | |
Domain0 Next Mode : S-mode | |
Domain0 SysReset : yes | |
Domain0 SysSuspend : yes | |
Boot HART ID : 0 | |
Boot HART Domain : root | |
Boot HART Priv Version : v1.11 | |
Boot HART Base ISA : rv64imafdcvx | |
Boot HART ISA Extensions : zicntr,zihpm | |
Boot HART PMP Count : 0 | |
Boot HART PMP Granularity : 0 | |
Boot HART PMP Address Bits: 0 | |
Boot HART MHPM Count : 16 | |
Boot HART MIDELEG : 0x0000000000000222 | |
Boot HART MEDELEG : 0x000000000000b109 | |
[ 0.000000] Linux version 6.6.0-rc6-00009-g7350e0f7e85c (pdp7@x1) (riscv64-linux-gnu-gcc (Ubuntu 12.3.0-1ubuntu1~22.04) 12.3.0, GNU ld (GNU Binutils for Ubuntu) 2.38) #407 SMP Tue Oct 17 12:55:34 PDT 2023 | |
[ 0.000000] Machine model: BeagleV Ahead | |
[ 0.000000] SBI specification v1.0 detected | |
[ 0.000000] SBI implementation ID=0x1 Version=0x10003 | |
[ 0.000000] SBI TIME extension detected | |
[ 0.000000] SBI IPI extension detected | |
[ 0.000000] SBI RFENCE extension detected | |
[ 0.000000] earlycon: uart0 at MMIO32 0x000000ffe7014000 (options '115200n8') | |
[ 0.000000] printk: bootconsole [uart0] enabled | |
[ 0.000000] efi: UEFI not found. | |
[ 0.000000] OF: reserved mem: 0x0000000000000000..0x000000000001ffff (128 KiB) nomap non-reusable mmode_resv0@0 | |
[ 0.000000] OF: reserved mem: 0x0000000000020000..0x000000000003ffff (128 KiB) nomap non-reusable mmode_resv1@20000 | |
[ 0.000000] Zone ranges: | |
[ 0.000000] DMA32 [mem 0x0000000000000000-0x00000000ffffffff] | |
[ 0.000000] Normal empty | |
[ 0.000000] Movable zone start for each node | |
[ 0.000000] Early memory node ranges | |
[ 0.000000] node 0: [mem 0x0000000000000000-0x000000000003ffff] | |
[ 0.000000] node 0: [mem 0x0000000000040000-0x00000000ffffffff] | |
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000000ffffffff] | |
[ 0.000000] SBI HSM extension detected | |
[ 0.000000] Falling back to deprecated "riscv,isa" | |
[ 0.000000] riscv: base ISA extensions acdfim | |
[ 0.000000] riscv: ELF capabilities acdfim | |
[ 0.000000] percpu: Embedded 19 pages/cpu s39672 r8192 d29960 u77824 | |
[ 0.000000] pcpu-alloc: s39672 r8192 d29960 u77824 alloc=19*4096 | |
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 | |
[ 0.000000] Kernel command line: root=/dev/mmcblk0p3 rootfstype=ext4 rootwait console=ttyS0,115200 loglevel=8 earlycon | |
[ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) | |
[ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) | |
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1032192 | |
[ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off | |
[ 0.000000] Virtual kernel memory layout: | |
[ 0.000000] fixmap : 0xffffffc6fea00000 - 0xffffffc6ff000000 (6144 kB) | |
[ 0.000000] pci io : 0xffffffc6ff000000 - 0xffffffc700000000 ( 16 MB) | |
[ 0.000000] vmemmap : 0xffffffc700000000 - 0xffffffc800000000 (4096 MB) | |
[ 0.000000] vmalloc : 0xffffffc800000000 - 0xffffffd800000000 ( 64 GB) | |
[ 0.000000] modules : 0xffffffff00f4f000 - 0xffffffff80000000 (2032 MB) | |
[ 0.000000] lowmem : 0xffffffd800000000 - 0xffffffd900000000 (4096 MB) | |
[ 0.000000] kernel : 0xffffffff80000000 - 0xffffffffffffffff (2047 MB) | |
[ 0.000000] Memory: 4089072K/4194304K available (6070K kernel code, 4900K rwdata, 2048K rodata, 2181K init, 397K bss, 105232K reserved, 0K cma-reserved) | |
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 | |
[ 0.000000] rcu: Hierarchical RCU implementation. | |
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. | |
[ 0.000000] rcu: RCU debug extended QS entry/exit. | |
[ 0.000000] Tracing variant of Tasks RCU enabled. | |
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. | |
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 | |
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 | |
[ 0.000000] riscv-intc: 64 local interrupts mapped | |
[ 0.000000] plic: interrupt-controller@ffd8000000: mapped 240 interrupts with 4 handlers for 8 contexts. | |
[ 0.000000] riscv: providing IPIs using SBI IPI extension | |
[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. | |
[ 0.000000] clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x1623fa770, max_idle_ns: 881590404476 ns | |
[ 0.000001] sched_clock: 64 bits at 3000kHz, resolution 333ns, wraps every 4398046511097ns | |
[ 0.008899] Console: colour dummy device 80x25 | |
[ 0.013595] Calibrating delay loop (skipped), value calculated using timer frequency.. 6.00 BogoMIPS (lpj=12000) | |
[ 0.024199] pid_max: default: 32768 minimum: 301 | |
[ 0.029155] LSM: initializing lsm=capability | |
[ 0.033738] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) | |
[ 0.041490] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) | |
[ 0.052925] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1. | |
[ 0.060845] riscv: ELF compat mode unsupported | |
[ 0.060911] ASID allocator using 16 bits (65536 entries) | |
[ 0.071069] rcu: Hierarchical SRCU implementation. | |
[ 0.076018] rcu: Max phase no-delay instances is 1000. | |
[ 0.081809] EFI services will not be available. | |
[ 0.087026] smp: Bringing up secondary CPUs ... | |
[ 1.097615] CPU1: failed to come online | |
[ 2.123543] CPU2: failed to come online | |
[ 3.149572] CPU3: failed to come online | |
[ 3.153587] smp: Brought up 1 node, 1 CPU | |
[ 3.159582] devtmpfs: initialized | |
[ 3.168079] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns | |
[ 3.178270] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) | |
[ 3.185760] pinctrl core: initialized pinctrl subsystem | |
[ 3.192760] NET: Registered PF_NETLINK/PF_ROUTE protocol family | |
[ 3.199962] DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations | |
[ 3.207342] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations | |
[ 3.215462] audit: initializing netlink subsys (disabled) | |
[ 3.221734] thermal_sys: Registered thermal governor 'step_wise' | |
[ 3.221837] audit: type=2000 audit(3.148:1): state=initialized audit_enabled=0 res=1 | |
[ 3.235954] cpuidle: using governor menu | |
[ 3.264077] cpu0: Ratio of byte access time to unaligned word access is 6.14, unaligned accesses are fast | |
[ 3.275784] platform soc: Fixed dependency cycle(s) with /soc/interrupt-controller@ffd8000000 | |
[ 3.288648] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages | |
[ 3.295481] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page | |
[ 3.302952] iommu: Default domain type: Translated | |
[ 3.307796] iommu: DMA domain TLB invalidation policy: strict mode | |
[ 3.314818] SCSI subsystem initialized | |
[ 3.320723] clocksource: Switched to clocksource riscv_clocksource | |
[ 3.344050] NET: Registered PF_INET protocol family | |
[ 3.349333] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear) | |
[ 3.364505] tcp_listen_portaddr_hash hash table entries: 2048 (order: 4, 65536 bytes, linear) | |
[ 3.373406] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) | |
[ 3.381623] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear) | |
[ 3.389969] TCP bind hash table entries: 32768 (order: 9, 2097152 bytes, linear) | |
[ 3.400885] TCP: Hash tables configured (established 32768 bind 32768) | |
[ 3.407856] UDP hash table entries: 2048 (order: 5, 196608 bytes, linear) | |
[ 3.415185] UDP-Lite hash table entries: 2048 (order: 5, 196608 bytes, linear) | |
[ 3.423391] NET: Registered PF_UNIX/PF_LOCAL protocol family | |
[ 3.431745] workingset: timestamp_bits=46 max_order=20 bucket_order=0 | |
[ 3.439194] NET: Registered PF_ALG protocol family | |
[ 3.444286] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) | |
[ 3.452018] io scheduler mq-deadline registered | |
[ 3.456714] io scheduler kyber registered | |
[ 3.460823] io scheduler bfq registered | |
[ 3.467183] dw_axi_dmac_platform ffefc00000.dma-controller: WARN: Device release is not defined so it is not safe to unbind this driver while in use | |
[ 3.481668] dw_axi_dmac_platform ffefc00000.dma-controller: DesignWare AXI DMA Controller, 4 channels | |
[ 3.591347] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled | |
[ 3.601931] printk: console [ttyS0] disabled | |
[ 3.607015] ffe7014000.serial: ttyS0 at MMIO 0xffe7014000 (irq = 13, base_baud = 6250000) is a 16550A | |
[ 3.616387] printk: console [ttyS0] enabled | |
[ 3.616387] printk: console [ttyS0] enabled | |
[ 3.624929] printk: bootconsole [uart0] disabled | |
[ 3.624929] printk: bootconsole [uart0] disabled | |
[ 3.647666] loop: module loaded | |
[ 3.654351] mousedev: PS/2 mouse device common for all mice | |
[ 3.661189] sdhci: Secure Digital Host Controller Interface driver | |
[ 3.667409] sdhci: Copyright(c) Pierre Ossman | |
[ 3.671953] sdhci-pltfm: SDHCI platform and OF driver helper | |
[ 3.678171] riscv-pmu-sbi: SBI PMU extension is available | |
[ 3.683661] riscv-pmu-sbi: 16 firmware and 18 hardware counters | |
[ 3.692271] NET: Registered PF_INET6 protocol family | |
[ 3.698790] Segment Routing with IPv6 | |
[ 3.702607] In-situ OAM (IOAM) with IPv6 | |
[ 3.706692] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver | |
[ 3.713673] NET: Registered PF_PACKET protocol family | |
[ 3.718830] 9pnet: Installing 9P2000 support | |
[ 3.723256] Key type dns_resolver registered | |
[ 3.727569] start plist test | |
[ 3.735029] end plist test | |
[ 3.764322] debug_vm_pgtable: [debug_vm_pgtable ]: Validating architecture page table helpers | |
[ 3.774826] mmc0: SDHCI controller on ffe7080000.mmc [ffe7080000.mmc] using ADMA 64-bit | |
[ 3.783726] clk: Disabling unused clocks | |
[ 3.788583] dw-apb-uart ffe7014000.serial: forbid DMA for kernel console | |
[ 3.795545] Waiting for root device /dev/mmcblk0p3... | |
[ 3.840386] mmc0: new HS400 MMC card at address 0001 | |
[ 3.846394] mmcblk0: mmc0:0001 TB2916 14.6 GiB | |
[ 3.855835] mmcblk0: p1 p2 p3 | |
[ 3.860406] mmcblk0boot0: mmc0:0001 TB2916 4.00 MiB | |
[ 3.867652] mmcblk0boot1: mmc0:0001 TB2916 4.00 MiB | |
[ 3.874959] mmcblk0rpmb: mmc0:0001 TB2916 4.00 MiB, chardev (246:0) | |
[ 3.884001] EXT4-fs (mmcblk0p3): INFO: recovery required on readonly filesystem | |
[ 3.891396] EXT4-fs (mmcblk0p3): write access will be enabled during recovery | |
[ 3.919583] EXT4-fs (mmcblk0p3): orphan cleanup on readonly fs | |
[ 3.925546] EXT4-fs (mmcblk0p3): recovery complete | |
[ 3.931649] EXT4-fs (mmcblk0p3): mounted filesystem 8ff201a2-f23f-44a4-b218-f156bd960edc ro with ordered data mode. Quota mode: disabled. | |
[ 3.944142] VFS: Mounted root (ext4 filesystem) readonly on device 179:3. | |
[ 3.951558] devtmpfs: mounted | |
[ 3.955615] Freeing unused kernel image (initmem) memory: 2180K | |
[ 3.961613] Run /sbin/init as init process | |
[ 3.965740] with arguments: | |
[ 3.968732] /sbin/init | |
[ 3.971449] with environment: | |
[ 3.974616] HOME=/ | |
[ 3.976996] TERM=linux | |
[ 4.025537] EXT4-fs (mmcblk0p3): re-mounted 8ff201a2-f23f-44a4-b218-f156bd960edc r/w. Quota mode: disabled. | |
Starting syslogd: OK | |
Starting klogd: OK | |
Running sysctl: OK | |
Seeding 256 bits without crediting | |
Saving 256 bits of non-creditable seed for next boot | |
Welcome to Buildroot | |
buildroot login: root | |
# ls | |
# touch EMMC | |
# ls -la | |
total 2 | |
drwx------ 2 root root 1024 Jan 1 00:01 [1;34m.[m | |
drwxr-xr-x 18 root root 1024 Jul 24 2023 [1;34m..[m | |
-rw-r--r-- 1 root root 0 Jan 1 00:01 [0;0mEMMC[m | |
# mount | |
/dev/root on / type ext4 (rw,relatime) | |
devtmpfs on /dev type devtmpfs (rw,relatime,size=2044536k,nr_inodes=511134,mode=755) | |
proc on /proc type proc (rw,relatime) | |
devpts on /dev/pts type devpts (rw,relatime,gid=5,mode=620,ptmxmode=666) | |
tmpfs on /dev/shm type tmpfs (rw,relatime,mode=777) | |
tmpfs on /tmp type tmpfs (rw,relatime) | |
tmpfs on /run type tmpfs (rw,nosuid,nodev,relatime,mode=755) | |
sysfs on /sys type sysfs (rw,relatime) | |
# uname -a | |
Linux buildroot 6.6.0-rc6-00009-g7350e0f7e85c #407 SMP Tue Oct 17 12:55:34 PDT 2023 riscv64 GNU/Linux | |
# |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment