Skip to content

Instantly share code, notes, and snippets.

@pdp7

pdp7/LicheePi 4A boot on eMMC.txt

Created November 2, 2023 02:02
Show Gist options
  • Save pdp7/97017ad88d83fccac18eba69bff817b7 to your computer and use it in GitHub Desktop.
Save pdp7/97017ad88d83fccac18eba69bff817b7 to your computer and use it in GitHub Desktop.
Download ZIP
Linux 6.6 with TH1520 MMC patch series v4 boot on LicheePi 4A
Raw
LicheePi 4A boot on eMMC.txt
brom_ver 8
[APP][E] protocol_connect failed, exit.
-----------------------------------------
_____ _ _____ _____ _ __
| __ \ (_)/ ____| __ \| |/ /
| |__) | _ _ _ _| (___ | | | | ' /
| _ / | | | | | | |\___ \| | | | <
| | \ \ |_| | |_| | |____) | |__| | . \
|_| \_\__,_|\__, |_|_____/|_____/|_|\_\
__/ |
|___/
-- Presented by ISCAS
-----------------------------------------
U-Boot SPL 2020.01-gabc7bb33e3f2 (Jul 27 2023 - 19:17:30 -0700)
FM[1] lpddr4x dualrank freq=3733 64bit dbi_off=n sdram init
ddr initialized, jump to uboot
image has no header
U-Boot 2020.01-gabc7bb33e3f2 (Jul 27 2023 - 19:17:30 -0700)
CPU: rv64imafdcvsu
Model: T-HEAD c910 light
DRAM: 8 GiB
C910 CPU FREQ: 750MHz
AHB2_CPUSYS_HCLK FREQ: 250MHz
AHB3_CPUSYS_PCLK FREQ: 125MHz
PERISYS_AHB_HCLK FREQ: 250MHz
PERISYS_APB_PCLK FREQ: 62MHz
GMAC PLL POSTDIV FREQ: 1000MHZ
DPU0 PLL POSTDIV FREQ: 1188MHZ
DPU1 PLL POSTDIV FREQ: 1188MHZ
MMC: sdhci@ffe7080000: 0, sd@ffe7090000: 1
Loading Environment from MMC... OK
Error reading output register
Warning: cannot get lcd-en GPIO
LCD panel cannot be found : -121
splash screen startup cost 16 ms
In: serial
Out: serial
Err: serial
ethaddr: fa:2f:cb:fb:dd:16
eth1addr: fa:2f:cb:fb:dd:17
Net: ethernet@ffe7070000 (eth0) using MAC address - fa:2f:cb:fb:dd:16
eth0: ethernet@ffe7070000ethernet@ffe7070000:0 is connected to ethernet@ffe7070000. Reconnecting to ethernet@ffe7060000
ethernet@ffe7060000 (eth1) using MAC address - fa:2f:cb:fb:dd:17
, eth1: ethernet@ffe7060000
Hit any key to stop autoboot: 2  1  0
## Error: "findpart" not defined
50340 bytes read in 1 ms (48 MiB/s)
15748 bytes read in 1 ms (15 MiB/s)
138368 bytes read in 1 ms (132 MiB/s)
Retrieving file: /extlinux/extlinux.conf
184 bytes read in 1 ms (179.7 KiB/s)
1: Linux eMMC
Retrieving file: /Image
15641600 bytes read in 37 ms (403.2 MiB/s)
append: root=/dev/mmcblk0p3 rootfstype=ext4 rootwait console=ttyS0,115200 loglevel=8 earlycon
Retrieving file: /<NULL>-light-c910.
Skipping Linux eMMC for failure retrieving fdt
C910 Light# setenv fdtfile th1520-lichee-pi-4a.dtb
C910 Light# boot
## Error: "findpart" not defined
50340 bytes read in 1 ms (48 MiB/s)
15748 bytes read in 1 ms (15 MiB/s)
138368 bytes read in 2 ms (66 MiB/s)
Retrieving file: /extlinux/extlinux.conf
184 bytes read in 1 ms (179.7 KiB/s)
1: Linux eMMC
Retrieving file: /Image
15641600 bytes read in 37 ms (403.2 MiB/s)
append: root=/dev/mmcblk0p3 rootfstype=ext4 rootwait console=ttyS0,115200 loglevel=8 earlycon
Retrieving file: /th1520-lichee-pi-4a.dtb
9040 bytes read in 2 ms (4.3 MiB/s)
## Flattened Device Tree blob at 01f00000
Booting using the fdt blob at 0x1f00000
Using Device Tree in place at 0000000001f00000, end 0000000001f0534f
Starting kernel ...
OpenSBI v1.3-31-g0ad866067d78
____ _____ ____ _____
/ __ \ / ____| _ \_ _|
| | | |_ __ ___ _ __ | (___ | |_) || |
| | | | '_ \ / _ \ '_ \ \___ \| _ < | |
| |__| | |_) | __/ | | |____) | |_) || |_
\____/| .__/ \___|_| |_|_____/|____/_____|
| |
|_|
Platform Name : Sipeed Lichee Pi 4A
Platform Features : medeleg
Platform HART Count : 4
Platform IPI Device : aclint-mswi
Platform Timer Device : aclint-mtimer @ 3000000Hz
Platform Console Device : uart8250
Platform HSM Device : ---
Platform PMU Device : ---
Platform Reboot Device : ---
Platform Shutdown Device : ---
Platform Suspend Device : ---
Platform CPPC Device : ---
Firmware Base : 0x0
Firmware Size : 224 KB
Firmware RW Offset : 0x20000
Firmware RW Size : 96 KB
Firmware Heap Offset : 0x2e000
Firmware Heap Size : 40 KB (total), 2 KB (reserved), 9 KB (used), 28 KB (free)
Firmware Scratch Size : 4096 B (total), 760 B (used), 3336 B (free)
Runtime SBI Version : 1.0
Domain0 Name : root
Domain0 Boot HART : 0
Domain0 HARTs : 0*,1*,2*,3*
Domain0 Region00 : 0x000000ffdc008000-0x000000ffdc00bfff M: (I,R,W) S/U: ()
Domain0 Region01 : 0x000000ffdc000000-0x000000ffdc007fff M: (I,R,W) S/U: ()
Domain0 Region02 : 0x0000000000000000-0x000000000001ffff M: (R,X) S/U: ()
Domain0 Region03 : 0x0000000000020000-0x000000000003ffff M: (R,W) S/U: ()
Domain0 Region04 : 0x0000000000000000-0xffffffffffffffff M: () S/U: (R,W,X)
Domain0 Next Address : 0x0000000000200000
Domain0 Next Arg1 : 0x0000000001f00000
Domain0 Next Mode : S-mode
Domain0 SysReset : yes
Domain0 SysSuspend : yes
Boot HART ID : 0
Boot HART Domain : root
Boot HART Priv Version : v1.11
Boot HART Base ISA : rv64imafdcvx
Boot HART ISA Extensions : zicntr,zihpm
Boot HART PMP Count : 0
Boot HART PMP Granularity : 0
Boot HART PMP Address Bits: 0
Boot HART MHPM Count : 16
Boot HART MIDELEG : 0x0000000000000222
Boot HART MEDELEG : 0x000000000000b109
[ 0.000000] Linux version 6.6.0-gbe521784ce22 (pdp7@x1) (riscv64-linux-gnu-gcc (Ubuntu 12.3.0-1ubuntu1~22.04) 12.3.0, GNU ld (GNU Binutils for Ubuntu) 2.38) #449 SMP Wed Nov 1 18:54:00 PDT 2023
[ 0.000000] Machine model: Sipeed Lichee Pi 4A
[ 0.000000] SBI specification v1.0 detected
[ 0.000000] SBI implementation ID=0x1 Version=0x10003
[ 0.000000] SBI TIME extension detected
[ 0.000000] SBI IPI extension detected
[ 0.000000] SBI RFENCE extension detected
[ 0.000000] earlycon: uart0 at MMIO32 0x000000ffe7014000 (options '115200n8')
[ 0.000000] printk: bootconsole [uart0] enabled
[ 0.000000] efi: UEFI not found.
[ 0.000000] OF: reserved mem: 0x0000000000000000..0x000000000001ffff (128 KiB) nomap non-reusable mmode_resv0@0
[ 0.000000] OF: reserved mem: 0x0000000000020000..0x000000000003ffff (128 KiB) nomap non-reusable mmode_resv1@20000
[ 0.000000] Zone ranges:
[ 0.000000] DMA32 [mem 0x0000000000000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x00000001ffffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x000000000003ffff]
[ 0.000000] node 0: [mem 0x0000000000040000-0x00000001ffffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000001ffffffff]
[ 0.000000] SBI HSM extension detected
[ 0.000000] Falling back to deprecated "riscv,isa"
[ 0.000000] riscv: base ISA extensions acdfim
[ 0.000000] riscv: ELF capabilities acdfim
[ 0.000000] percpu: Embedded 19 pages/cpu s39672 r8192 d29960 u77824
[ 0.000000] pcpu-alloc: s39672 r8192 d29960 u77824 alloc=19*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Kernel command line: root=/dev/mmcblk0p3 rootfstype=ext4 rootwait console=ttyS0,115200 loglevel=8 earlycon
[ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 2064384
[ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off
[ 0.000000] software IO TLB: area num 4.
[ 0.000000] software IO TLB: mapped [mem 0x00000000fbfff000-0x00000000fffff000] (64MB)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] fixmap : 0xffffffc6fea00000 - 0xffffffc6ff000000 (6144 kB)
[ 0.000000] pci io : 0xffffffc6ff000000 - 0xffffffc700000000 ( 16 MB)
[ 0.000000] vmemmap : 0xffffffc700000000 - 0xffffffc800000000 (4096 MB)
[ 0.000000] vmalloc : 0xffffffc800000000 - 0xffffffd800000000 ( 64 GB)
[ 0.000000] modules : 0xffffffff00f4f000 - 0xffffffff80000000 (2032 MB)
[ 0.000000] lowmem : 0xffffffd800000000 - 0xffffffda00000000 (8192 MB)
[ 0.000000] kernel : 0xffffffff80000000 - 0xffffffffffffffff (2047 MB)
[ 0.000000] Memory: 8145264K/8388608K available (6127K kernel code, 4901K rwdata, 2048K rodata, 2181K init, 397K bss, 243344K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
[ 0.000000] rcu: RCU debug extended QS entry/exit.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] riscv-intc: 64 local interrupts mapped
[ 0.000000] plic: interrupt-controller@ffd8000000: mapped 240 interrupts with 4 handlers for 8 contexts.
[ 0.000000] riscv: providing IPIs using SBI IPI extension
[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.000000] clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x1623fa770, max_idle_ns: 881590404476 ns
[ 0.000001] sched_clock: 64 bits at 3000kHz, resolution 333ns, wraps every 4398046511097ns
[ 0.008801] Console: colour dummy device 80x25
[ 0.013508] Calibrating delay loop (skipped), value calculated using timer frequency.. 6.00 BogoMIPS (lpj=12000)
[ 0.023968] pid_max: default: 32768 minimum: 301
[ 0.028844] LSM: initializing lsm=capability
[ 0.033470] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.041322] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.053015] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
[ 0.061022] riscv: ELF compat mode unsupported
[ 0.061084] ASID allocator using 16 bits (65536 entries)
[ 0.071519] rcu: Hierarchical SRCU implementation.
[ 0.076531] rcu: Max phase no-delay instances is 1000.
[ 0.082366] EFI services will not be available.
[ 0.087639] smp: Bringing up secondary CPUs ...
[ 1.098182] CPU1: failed to come online
[ 2.124101] CPU2: failed to come online
[ 3.150009] CPU3: failed to come online
[ 3.154055] smp: Brought up 1 node, 1 CPU
[ 3.161114] devtmpfs: initialized
[ 3.169610] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 3.179790] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 3.187148] pinctrl core: initialized pinctrl subsystem
[ 3.193256]
[ 3.194793] *************************************************************
[ 3.201878] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
[ 3.208957] ** **
[ 3.215928] ** IOMMU DebugFS SUPPORT HAS BEEN ENABLED IN THIS KERNEL **
[ 3.222969] ** **
[ 3.230007] ** This means that this kernel is built to expose internal **
[ 3.237019] ** IOMMU data structures, which may compromise security on **
[ 3.244016] ** your system. **
[ 3.251037] ** **
[ 3.258015] ** If you see this message and you are not debugging the **
[ 3.265036] ** kernel, report this immediately to your vendor! **
[ 3.272076] ** **
[ 3.279105] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
[ 3.286117] *************************************************************
[ 3.294032] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 3.301375] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
[ 3.308961] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 3.317203] audit: initializing netlink subsys (disabled)
[ 3.323504] thermal_sys: Registered thermal governor 'step_wise'
[ 3.323607] audit: type=2000 audit(3.204:1): state=initialized audit_enabled=0 res=1
[ 3.337823] cpuidle: using governor menu
[ 3.365980] cpu0: Ratio of byte access time to unaligned word access is 6.14, unaligned accesses are fast
[ 3.377721] platform soc: Fixed dependency cycle(s) with /soc/interrupt-controller@ffd8000000
[ 3.390797] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[ 3.397807] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
[ 3.405049] iommu: Default domain type: Translated
[ 3.410056] iommu: DMA domain TLB invalidation policy: strict mode
[ 3.417018] SCSI subsystem initialized
[ 3.422774] clocksource: Switched to clocksource riscv_clocksource
[ 3.446004] NET: Registered PF_INET protocol family
[ 3.451547] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 3.473724] tcp_listen_portaddr_hash hash table entries: 4096 (order: 5, 131072 bytes, linear)
[ 3.482913] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 3.491207] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 3.499861] TCP bind hash table entries: 65536 (order: 10, 4194304 bytes, linear)
[ 3.514523] TCP: Hash tables configured (established 65536 bind 65536)
[ 3.521537] UDP hash table entries: 4096 (order: 6, 393216 bytes, linear)
[ 3.529100] UDP-Lite hash table entries: 4096 (order: 6, 393216 bytes, linear)
[ 3.537391] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 3.545843] workingset: timestamp_bits=46 max_order=21 bucket_order=0
[ 3.553381] NET: Registered PF_ALG protocol family
[ 3.558512] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[ 3.566252] io scheduler mq-deadline registered
[ 3.570943] io scheduler kyber registered
[ 3.575134] io scheduler bfq registered
[ 3.581503] dw_axi_dmac_platform ffefc00000.dma-controller: WARN: Device release is not defined so it is not safe to unbind this driver while in use
[ 3.595684] dw_axi_dmac_platform ffefc00000.dma-controller: DesignWare AXI DMA Controller, 4 channels
[ 3.703070] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 3.713577] printk: console [ttyS0] disabled
[ 3.718679] ffe7014000.serial: ttyS0 at MMIO 0xffe7014000 (irq = 13, base_baud = 6250000) is a 16550A
[ 3.728366] printk: console [ttyS0] enabled
[ 3.728366] printk: console [ttyS0] enabled
[ 3.736953] printk: bootconsole [uart0] disabled
[ 3.736953] printk: bootconsole [uart0] disabled
[ 3.759744] loop: module loaded
[ 3.766143] mousedev: PS/2 mouse device common for all mice
[ 3.772916] sdhci: Secure Digital Host Controller Interface driver
[ 3.779142] sdhci: Copyright(c) Pierre Ossman
[ 3.783689] sdhci-pltfm: SDHCI platform and OF driver helper
[ 3.789875] riscv-pmu-sbi: SBI PMU extension is available
[ 3.795362] riscv-pmu-sbi: 16 firmware and 18 hardware counters
[ 3.805519] NET: Registered PF_INET6 protocol family
[ 3.812112] Segment Routing with IPv6
[ 3.815937] In-situ OAM (IOAM) with IPv6
[ 3.820017] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[ 3.826982] NET: Registered PF_PACKET protocol family
[ 3.832138] 9pnet: Installing 9P2000 support
[ 3.836537] Key type dns_resolver registered
[ 3.840852] start plist test
[ 3.847403] end plist test
[ 3.877060] debug_vm_pgtable: [debug_vm_pgtable ]: Validating architecture page table helpers
[ 3.887712] mmc1: SDHCI controller on ffe7090000.mmc [ffe7090000.mmc] using ADMA 64-bit
[ 3.896009] mmc0: SDHCI controller on ffe7080000.mmc [ffe7080000.mmc] using ADMA 64-bit
[ 3.904993] clk: Disabling unused clocks
[ 3.909826] dw-apb-uart ffe7014000.serial: forbid DMA for kernel console
[ 3.916789] Waiting for root device /dev/mmcblk0p3...
[ 3.978068] mmc0: new HS400 MMC card at address 0001
[ 3.984106] mmcblk0: mmc0:0001 8GTF4R 7.28 GiB
[ 3.994019] mmcblk0: p1 p2 p3
[ 3.998595] mmcblk0boot0: mmc0:0001 8GTF4R 4.00 MiB
[ 4.006024] mmcblk0boot1: mmc0:0001 8GTF4R 4.00 MiB
[ 4.013131] mmcblk0rpmb: mmc0:0001 8GTF4R 512 KiB, chardev (246:0)
[ 4.030240] EXT4-fs (mmcblk0p3): orphan cleanup on readonly fs
[ 4.036207] EXT4-fs (mmcblk0p3): mounted filesystem 8ff201a2-f23f-44a4-b218-f156bd960edc ro with ordered data mode. Quota mode: disabled.
[ 4.048673] VFS: Mounted root (ext4 filesystem) readonly on device 179:3.
[ 4.056056] devtmpfs: mounted
[ 4.060170] Freeing unused kernel image (initmem) memory: 2180K
[ 4.066805] Run /sbin/init as init process
[ 4.070935] with arguments:
[ 4.073913] /sbin/init
[ 4.076647] with environment:
[ 4.079814] HOME=/
[ 4.082182] TERM=linux
[ 4.132602] EXT4-fs (mmcblk0p3): re-mounted 8ff201a2-f23f-44a4-b218-f156bd960edc r/w. Quota mode: disabled.
Starting syslogd: OK
Starting klogd: OK
Running sysctl: OK
Seeding 256 bits without crediting
Saving 256 bits of non-creditable seed for next boot
Welcome to Buildroot
buildroot login: root
# ls -la
total 2
drwx------ 2 root root 1024 Jan 1 00:00 .
drwxr-xr-x 18 root root 1024 Jul 24 2023 ..
-rw-r--r-- 1 root root 0 Jan 1 00:00 FOO
-rw-r--r-- 1 root root 0 Jan 1 00:00 THIS_IS_EMMC
-rw-r--r-- 1 root root 0 Jan 1 00:00 lpi4-test.txt
#
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment